Hikvision DeepinView ANPR Operation
Hikvision Certified Security Professional
HCSP 1
Contents
ANPR Camera Installation
ANPR Camera Configuration
Configuration On NVR for ANPR
Configuration On Hik-Central
HCSP 2
Contents
Part 1
ANPR Camera Installation
HCSP 3
ANPR Camera Installation
?
What to consider before positioning the ANPR camera?
• Vehicle speed and direction
• Position of license plate
• Reflection and backlight
• Stability of construction
• Weather conditions
HCSP 4
Installation Checklist
To obtain the maximum license plate recognition accuracy:
Angle to license plate (H-V)
Lighting condition (day and night)
Exposure time
Pixel size of license plate
Angle of license plate
The qualified image examples:
Day Night
HCSP 5
Basic Requirement of Entrance & Exit
Type 1: Entrance & Exit
Vehicles in the detection area should go as straight as
possible instead of turning left or right.
L > 4m
Vertical angle
The angle between lens direction and horizontal should
be less than 30 degrees.
L > 4m H > 1.5m
30° ＞
HCSP 6
Basic Requirement of Entrance & Exit
Horizontal angle
The view angle of the camera should be within 30 degrees to the
path of movement.
30° ＞
HCSP 7
Basic Requirement of Road Monitoring
Type 2: Road monitoring
Maximum speed:
120km/h
Different installation angle needs different lens (8-32/11-40/7-33 mm )
HCSP 8
Basic Requirement of Road Monitoring
Horizontal angle
The view angle of the camera should be within 30 degrees to the path of movement.
30° ＞
HCSP 9
License Plate Requirement
License plate tilt angle must be within ： +/-5 degrees
Width of license plate recommendation ：130-160 Pixels
HCSP 10
Incorrect Examples
Horizontal angle & LP tilt angle LP tilt angle. Mount height too low
HCSP 11
Contents
Part 2
ANPR Camera Configuration
HCSP 12
ANPR Camera + NVR
License Plate Recognition
Vehicle Detection Vehicle Info Management
NVR
Entrance Time: xxx Auto Comparison
Plate No.: WESxxx Blacklist Filtering
Country: xxx Alarm Triggering
Vehicle Type: xxx Result Query & Export
Remote configure ANPR
HCSP 13
ANPR Camera + Hik-Central
Smart Search
License Plate Recognition
Vehicle Detection Vehicle Info Management
HikCentral
Entrance Time: xxx Auto Comparison
Plate No.: WESxxx Blacklist Filtering
Country: xxx Alarm Triggering
Vehicle Type: xxx Result Query
Remote configure ANPR
HCSP 14
ANPR Camera + NVR + Hik-Central
License Plate Recognition
Vehicle Smart Search
Vehicle Info Management
Detection
NVR HikCentral
Entrance Time: xxx
Auto Comparison Auto Comparison
Plate No.: WESxxx
Blacklist Filtering Blacklist Filtering
Country: xxx
Alarm Triggering Alarm Triggering
Vehicle Type: xxx
Result Query & Export Result Query
Remote configure ANPR Parking Management
HCSP 15
Image adjustment
For image adjustment, it is recommended to choose Road for Mounting Scenario, which will
give you an optimized set of parameters for capturing license plate. But the exposure time
should be set according to the real scenarios.
HCSP 16
Image adjustment
For manual image adjustment, parameters are recommended as below:
Vehicle
Exposure time(s) Gain WDR BLC
speed(km/h)
5 1/100 20 OFF OFF
40 1/500 20 OFF OFF
100 1/1000 20 OFF OFF
200 1/2000 20 OFF OFF
Note: The table is for reference only. The configuration may be different for different scenarios.
HCSP 17
Qualified Image
HCSP 18
Detection Configuration
• Select number of lanes
• Click and drag the yellow lane line to set the
position
• Adjust the zoom ratio of the camera so that the
size of the vehicle in the image is close to that of
the red frame.
• Note: Only the position of red frame is adjustable.
And Only 1 license plate can be captured at one
time for each lane.
HCSP 19
How to draw detection area?
The area should contain the possible areas • Do not contain the part where there are rails,
where the license plate might appear, not only patterns, words on the road, etc.
the road section. • The area should not be more than 10m away.
HCSP 20
How to check the License Plate Width
HCSP 21
Detection Configuration
Set alarm linkage method
Edit arming schedule
Trigger to open gate
HCSP 22
Captured Picture Setting
Export template first.
Text Overlay Setting
HCSP 23
Import Blacklist & Whitelist
Import blacklist & whitelist
Export template first.
HCSP 24
Import Blacklist & Whitelist
Blacklist & whitelist template
After importing:
HCSP 25
Real-time LPR Result
HCSP 26
Contents
Part 3
Configuration On NVR
HCSP 27
Vehicle Detection Configuration
First login NVR web client.
Path: Configuration -- vehicle detection -- vehicle detection configuration
1.Choose camera,
2.Enable vehicle detection
3.Set detection area（border）
4.Select black list or white list.
HCSP 28
Vehicle Detection Configuration
• Set arming schedule
HCSP 29
Vehicle Detection Configuration
• Set alarm linkage action
Set alarm linkage.
HCSP 30
Results Query
Query the license plate on NVR.
Choose camera, country, time and enter
plate number to search.
HCSP 31
Settings on Local NVR
Enter Smart Event settings interface: Menu> System> Event >Smart Event
Enable vehicle detection
Setting Parameters
Configure the lane number
HCSP 32
License Plate Real-time Display
Enter Live View interface
license plate
HCSP 33
Search License Plates
File Management—Vehicle Files
HCSP 34
Search License Plates
File Management—Vehicle Files—Search
HCSP 35
Contents
Part 4
Configuration On Hik-Central Pro
HCSP 36
Configuration On Hik-Central Pro
ANPR function is dedicated for entrance/exit management. Please follow the steps
below to finish LPR recognition, alarm receiving and generate report.
Live view
Add LPR
Import Add ANPR and search Handle ANPR
device on
vehicle list alarm the license alarm
Web Client
plate number
Physical View Vehicle Event & Alarm Monitoring & Alarm Center
vehicle Search
HCSP 37
Configuration on Hik-Central
HikCentral provides entrance & exit management with ANPR Camera.
License plate recognition
Real-time output results
HCSP 38
Configuration on Hik-Central
License plate recognition
Real-time vehicle alarm
HCSP 39
Configuration Demonstration
HCSP 40
Thanks!
HCSP 41
