AX99100
PCIe to Multi I/O Controller
Features Product Brief
PCI Express Supports to fragment large data block into
Single-lane (X1) PCI Express End-point several smaller transfers on SPI bus to reduce
Controller with PHY integrated software loading
Compliant with PCI Express 2.0 Gen 1 Supports programmable transfer 0 ~ 8 bytes
OP-Code field in each transfer automatically to
Compliant with PCI Express card specifications reduce software loading
Compliant with PCI Power Management 1.2 Supports wake-up by SWAKEn pin from Slave
Supports four PCI Express functions
Local Bus Interface
Supports both legacy and MSI Interrupt
Supports memory or I/O access through PCIe
Supports ASPM Power Management BAR0/1 to local bus interface, each BAR
mapping to local bus' chip select (CS0n and
Serial Port Interface
CS1n)
Dual or Quad UARTs
Supports direct access and bus master access
Supports RS-232/RS-422/RS-485 multiprotocol (auto-increment and fixed address)
Bi-directional speeds up to 25 Mbps per port Supports 8-bit or 16-bit data bus width (little
Full Serial Modem Control and big endian bus swap)
Supports Hardware, Software Flow Control Supports up to 2 Kbytes address space and 2
Supports 5, 6, 7, 8 and 9-bit Serial format chip select outputs when separated address/data
bus style
Supports Even, Odd, None, Space and Mark
parity Supports up to 64 Kbytes address space and 2
chip select outputs when multiplexed
Supports Custom baud rate by internal PLL or address/data bus style
external clock
Supports programmable local chip select region
Supports On Chip 256 Byte depth FIFOs in
Transmit, Receive path of each Serial Port Supports “Slave Request based DMA” access
for interfacing with external device with bus
Supports remote wakeup and power master
management features
Supports clock out, CLKO, up to 62.5MHz
Serial Port transceiver shutdown support
Supports asynchronous or synchronous Local
Supports Slow IrDA mode (up to 115200bps) Bus with required clock output, CLKO
on all Serial Ports
Supports programmable bus access cycles,
Supports multi-drop application for 9-bit mode self-terminated bus access cycles and
Supports DMA burst transfer back-to-back turnaround cycles
Supports programmable RSTO, ALE, RDY,
Parallel Port
DREQ0/1, DACK0/1, CLKO polarity, and
Compatible with IEEE 1284 – SPP/Byte/ECP INT0/1 level/edge trigger
Mode
Supports wake-up by INT0/1 and DREQ0/1
SPI Interface pins
Programmable SPI clock frequency up to
Supports I2C Master Interface
42MHz
Up to 24 bi-directional GPIO lines including 8
Supports Mode 0, Mode 1, Mode 2 and Mode 3
dedicated GPIO and 16 multi-function GPIO
timing modes
Integrates on-chip power-on reset circuit
Supports MSB/LSB first transfer fashion
On Chip 3.3 to 1.2V Regulator
Programmable peripheral chip select, selecting
up to 7 SPI devices 68-pin QFN RoHS compliant package
Supports Non-Burst-Type transfer up to 8 bytes Operating temperature range: 0 to 70°C or -40 to
and/or Burst-Type transfer via DMA mode for +85°C
high performance
ASIX Electronics Corporation 1 Released Date: 2/23/2016
4F, No.8, Hsin Ann Rd., TEL: +886-3-579-9500
Hsinchu Science Park, FAX: +886-3-579-9558
Hsinchu, Taiwan 30078 http://www.asix.com.tw/
AX99100
PCIe to Multi I/O Controller
Product Description
The AX99100 is a single chip solution that fully integrates PCIe 2.0 Gen 1 end-point controller and SerDes with a
variety of peripherals such as four High Speed Serial Ports, one Parallel Port, I 2C Master, High Speed SPI, Local Bus
(ISA-Like) , and GPIOs. It consists of four main configurations such as 4S (PCIe to Quad Serial), 2S+1P (PCIe to Dual
Serial and Single Parallel), 2S+SPI (PCIe to Dual Serial and SPI), and LB (PCIe to Local Bus/ISA-Like) for different
kinds of applications.
The AX99100, in 68-pin QFN, are available with RoHS compliant package and supports commercial grade operating
temperature range from 0 to 70°C and industrial grade from -40 to 85°C.
Application Diagram
ASIX Electronics Corporation 2 Released Date: 2/23/2016
4F, No.8, Hsin Ann Rd., TEL: +886-3-579-9500
Hsinchu Science Park, FAX: +886-3-579-9558
Hsinchu, Taiwan 30078 http://www.asix.com.tw/
