0% found this document useful (0 votes)
204 views2 pages

6.4.3.4 Packet Tracer

This document outlines the network configuration of devices in a network including their interfaces, IP addresses, subnet masks, and default gateways. It also describes connectivity tests between devices and identifies any issues and their solutions.

Uploaded by

Hoang Nhat Minh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
204 views2 pages

6.4.3.4 Packet Tracer

This document outlines the network configuration of devices in a network including their interfaces, IP addresses, subnet masks, and default gateways. It also describes connectivity tests between devices and identifies any issues and their solutions.

Uploaded by

Hoang Nhat Minh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Device Interface IP Address Subnet Mask Default Gateway

G0/0 192.168.10.1 255.255.255.0 N/A


R1
G0/1 192.168.11.1 255.255.255.0 N/A
S1 VLAN 1 192.168.10.2 255.255.255.0  192.168.10.1
S2 VLAN 1 192.168.11.2 255.255.255.0  192.168.11.1
PC1 NIC 192.168.10.10 255.255.255.0  192.168.10.1
PC2 NIC 192.168.10.11 255.255.255.0  192.168.10.1
PC3 NIC 192.168.11.10 255.255.255.0  192.168.11.1
PC4 NIC 192.168.11.11 255.255.255.0  192.168.1.1

Test Successful? Issues Solution Verified

PC1 to PC2 No IP address on PC1 Change PC1 IP address  Yes

PC1 to S1 No IP address on PC1 Change PC1 IP address  Yes

PC1 to R1 No IP address on PC1 Change PC1 IP address  Yes

 PC2 to S1 Yes - -  

 PC2 to R1 Yes - -  

PC3 to S2 No IP adress is not set Set IP adress for S2 Yes

PC4 to S2 No IP adress is not set Set IP adress for S2 Yes

PC3 to R2 Yes - -

PC1 to PC3 Yes - -

Incorrect default Change default gateway


PC1 to PC4 No gateway on PC4 on PC4 Yes

PC1 to S2 Yes - -

PC3 to PC1 Yes - -

PC3 to PC2 Yes - -

Default gateway is
PC3 to S1 No not set Assign default gateway Yes

You might also like