Scribd
Upload
758 views5 pages

Tower Design Basis Report

This document is an input/design basis report for lattice/monopole towers. It provides details needed for designing towers such as the number of phases, configuration of power conductors, tower details, design span, steel details, conductor details, earth wire details, OPGW details, insulator details, wind speed, temperature details, electrical clearances, loading conditions, design codes, and foundation design parameters including soil type and bearing capacity. The document ensures all necessary information is collected to properly design the towers for a new or existing power line project.

Uploaded by

Md Mohsin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
758 views5 pages

Tower Design Basis Report

This document is an input/design basis report for lattice/monopole towers. It provides details needed for designing towers such as the number of phases, configuration of power conductors, tower details, design span, steel details, conductor details, earth wire details, OPGW details, insulator details, wind speed, temperature details, electrical clearances, loading conditions, design codes, and foundation design parameters including soil type and bearing capacity. The document ensures all necessary information is collected to properly design the towers for a new or existing power line project.

Uploaded by

Md Mohsin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Form No.

TLT/SD/R/01, Rev-0,Issue Date 1-7-2016

TITLE: INPUT/DESIGN BASIS REPORT FOR LATTICE/MONOPOLE TOWER

Tower Design:
Date:

Client Name:

Name of the Project:

New / Existing line:

Number of phases:

Type of configuration of Power Conductor:-

Tower details No. of towers Nominal Span

Extension

Design Span:-

Design Parameters:-

Steel Details:-

Pole Shaft Material Grade:

Pole Deflection Limits (%) If Any Special Provision, Please Specify:

1|Page
Form No. TLT/SD/R/01, Rev-0,Issue Date 1-7-2016

TITLE: INPUT/DESIGN BASIS REPORT FOR LATTICE/MONOPOLE TOWER

Conductor Details:

Total Cross Sectional area of conductor


Strand/dia. in mm(AL/STEEL)
Overall Diameter
Approximate mass
Approximate calculated breaking load
Final modulus of Elasticity
Coefficient of linear expansion

Earth wire-

Total Cross Sectional area of conductor


Strand/dia. in mm(AL/STEEL)
Overall Diameter
Approximate mass
Approximate calculated breaking load
Final modulus of Elasticity
Coefficient of linear expansion

OPGW-

Total Cross Sectional area of conductor


Strand/dia. in mm(AL/STEEL)
Overall Diameter
Approximate mass
Approximate calculated breaking load
Final modulus of Elasticity
Coefficient of linear expansion

Insulators Details:

Suspension Insulator

Double Tension Insulator

Wind Speed:

Terrain category:

2|Page
Form No. TLT/SD/R/01, Rev-0,Issue Date 1-7-2016

TITLE: INPUT/DESIGN BASIS REPORT FOR LATTICE/MONOPOLE TOWER

Temperature Details:

Conductor Earth wire


Minimum Temperature=
Maximum Temperature=
Everyday Temperature=

(If not sure about the clearance, they will be provided as per code provisions)

Starting Condition for Sag & Tension Calculation:-

Ground Clearance:

Electrical Clearances:

Swing Angles for Suspension String:

Degree Clearance

Swing Angles for Jumper String:

Degree Clearance

Swing Angles for Pilot String:

Degree Clearance

Swing Angles for Insulator String:

Degree Clearance

Minimum vertical clearances between Conductors:

3|Page
Form No. TLT/SD/R/01, Rev-0,Issue Date 1-7-2016

TITLE: INPUT/DESIGN BASIS REPORT FOR LATTICE/MONOPOLE TOWER

Minimum Horizontal clearances between Conductors:

Loading Conditions:

Broken Wire Condition:-

Design Codes:

Minimum Thickness to be used:

Slenderness Ratio

Factor of Safety:

Foundation Design:
*Design Standard:

*Foundation Type:

Muff:

*Lean concrete:

*Depth of Foundation:

Thickness of Slab:

Edge Thickness:

*Concrete Grade:

*Grade of Base Plate & Foundation Bolts:

*Reinforcement Grade:

*Soil Bearing Capacity (SBC):

*Factor of safety/Overload factor:

4|Page
Form No. TLT/SD/R/01, Rev-0,Issue Date 1-7-2016

TITLE: INPUT/DESIGN BASIS REPORT FOR LATTICE/MONOPOLE TOWER

Classification of Soil:

Remarks & Assumptions:

5|Page

You might also like