Cat GC ®
Control Panel
Image shown might not reflect actual configuration
GCCP 1.3 - Control Panel
GCCP 1.3 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of
generator set applications. It controls operation of the generator, monitors an extensive number
of engine parameters, and displays warnings, shutdown, and engine status information on the
back-lit LCD screen, illuminated LEDs and remote PC, if desired.
The GCCP 1.3 also monitors the mains (utility) supply and automatically starts and stops the
generator, depending on the status of the mains supply. It has the capability to manually or
automatically control the transfer of load.
FEATURES
• 4-line back-lit LCD text display
• Multiple display languages
• Five-key menu navigation
• LCD alarm indication
• Customisable power-up text and images
• Data logging facility
• Internal PLC editor
• Protections disable feature
• Fully configurable via PC using USB & RS485 communication
• Front panel configuration with PIN protection
• Power save mode
• 3-phase generator sensing and protection
• 3-phase mains (utility) sensing and protection
• Automatic load transfer control
• Mains (utility) current and power monitoring (kW, kvar, kVA, pf)
• Generator current and power monitoring (kW, kvar, kVA, pf)
• kW and kvar overload and reverse power alarms
• Over current protection
• Unbalanced load protection
• Breaker control via fascia buttons
• Fuel and start outputs configurable when using CAN
• Support for 0 V to 10 V & 4 mA to 20 mA sensors
• 8 configurable digital inputs (3 available for Customer use)
• 8 configurable digital outputs (5 available for Customer use)
• 4 configurable analogue outputs (3 available for Customer Use)
• CAN, MPU and alternator frequency speed sensing in one variant
• Real time clock
• Engine pre-heat and post-heat functions
• Engine run-time scheduler
• Engine idle control for starting &stopping
• Fuel usage monitor and low fuel level alarms
• 3 configurable maintenance alarms
BENEFITS
• Hours counter provides accurate information for monitoring and maintenance periods
• User-friendly set-up and button layout for ease of use
• Multiple parameters are monitored & displayed simultaneously for full visibility
• The module can be configured to suit a wide range of applications for user flexibility
• PLC editor allows user configurable functions to meet user specific application requirements.
• RS485 Communication port can be used for the Remote Monitoring Communication (Compatible
with Cat PLG)
LEHE2657-00 (06-20)
www.Cat.com/electricpower
©2020 Caterpillar All rights reserved. Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, “Caterpillar Corporate
Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
