INSTRUCTIONS 4.
Follow Instructions – All operating and use
instructions should be followed.
Please keep this instruction manual for future 5. Water and Moisture – The amplifier should
reference and for the duration of owning this not be used near water – for example, a
Soldano Amplifier. Please carefully read and bathtub, washbowl, kitchen sink, laundry tub,
understand the instructions inside this user’s wet basement, or near a swimming pool, and
manual before attempting to operate your new the like.
amp. This instruction manual includes essential 6. Carts and Stands – The amplifier should be
safety information regarding the use and used only with a cart or stand that is
maintenance of the amplifier. Take special care recommended by the manufacturer.
to heed all warning symbols and signs inside this An amplifier and cart combination should be
manual and those printed on the amplifier itself. moved with care. Quick stops, excessive force,
and uneven surfaces may cause the amplifier
and cart combination to overturn.
7. Wall or Ceiling Mounting
WARNING!
– The product should never be mounted to a wall
TO PREVENT FIRE OR SHOCK HAZARD, DO
or ceiling.
NOT EXPOSE THE AMPLIFIER TO WATER OR
8. Heat – Amplifier should be situated away
MOISTURE. DO NOT OPERATE NEAR ANY
from heat sources such as radiators, heat
WATER SOURCE.
registers, stoves, or other amplifier (including
amplifiers) that produce heat.
9. Power Sources – This product should be
WHAT’S THE MEANING OF THIS?
operated only from the type of power source
The lightning flash with an arrow triangular
indicated on the rating label.
symbol is intended to alert the user to the
If you are not sure of the type of power supply to
presence of non-insulated “dangerous voltage”
your home, consult your product dealer or local
within the products enclosure, and may be of
power company.
sufficient magnitude to constitute a risk of electric
10. Grounding or Polarization
shock
– This product may be equipped with a
polarized alternation-current line plug (a plug
having one blade wider than the other). This
WHAT’S THE MEANING OF THIS? plug will fit into the power outlet only one way.
The exclamation point triangular symbol is This is a safety feature. If you are unable to
intended to alert the user to the presence of insert the plug fully into the outlet, try reversing
important operating and maintenance (servicing) the plug. If the plug should still fail to fit, contact
instructions in the user manual accompanying your electrician to replace your obsolete outlet.
this amplifier! Do not defeat the safety purpose of the polarized
plug.
1. Read Instructions – All the safety and 11. Power-Cord Protection
operating instructions should be read before this – Power-supply cords should be routed so that
product is operated. they are not likely to be walked on or pinched by
2. Retain Instructions – The safety and operating items placed upon or against them, paying
instructions should be retained for future particular attention to the cord in
reference. correspondence of plugs, convenience
3. Heed Warnings – All warnings on the receptacles, and the point where they exit from
amplifier and in the operating instructions should the amplifier.
be adhered to. 12. Cleaning – The amplifier should be cleaned
only as recommended by the manufacturer.
Clean by wiping with a cloth slightly damp with product should not be placed in a built- in
water. Avoid getting water inside the amplifier. installation such as a bookcase or rack.
14. Non-use Periods – The power cord of the 19. Attachments – do not use attachments not
amplifier should be unplugged from the outlet recommended by the product manufacturer as
when left unused for a long period of time. they may cause hazards.
15. Object and Liquid Entry 20. Accessories – Do not place this product on
– Care should be taken so that objects do not fall an unstable cart, stand, tripod, bracket, or table.
and liquids are not spilled into the enclosure The product may fall, causing serious injury to a
through openings. child or adult, and serious damage to the
16. Damage Requiring Service product. Use only with a cart, stand, tripod,
– The amplifier should be serviced by qualified bracket, or table recommended by the
service personnel when: manufacturer, or sold with the product.
A. The power-supply cord or the plug has been 21. Lightning – For added protection for this
damaged; or product before a lightning storm, or when it is
B. Objects have fallen, or liquid has been spilled left unattended and unused for long periods of
into the amplifier; or time, unplug it from the wall outlet. This will
C. The amplifier has been exposed to rain; or prevent damage to the product due to lightning
D. The amplifier does not appear to operate and powerline surges.
normally or exhibits a marked change in 22. Replacement Parts – When replacement
performance; or parts are required, be sure the service technician
E. The amplifier has been dropped, or the has used replacement parts specified by the
enclosure damaged. manufacturer or have the same characteristics as
F. The amplifier needs tube replacement or the original part. Unauthorized substitutions may
biasing result in fire, electric shock, or other hazards.
17. Servicing – The user should not attempt any 23. Safety Check – Upon completion of any
service to the amplifier beyond that described in service or repairs to this product, ask the service
the operating instructions. technician to perform safety checks to determine
All other servicing should be referred to qualified that the product is in proper operating condition.
service personnel. 24. FUSES – Always use the correct rating and
18. Ventilation – Slots and openings in the type of fuse as indicated on the rear panel. Note
cabinet are provided for ventilation and to the proper rating fuse is determined by the AC
ensure reliable operation of the product and to line voltage in the country this unit is being
protect it from overheating, and these openings operated.
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This
Thank you for choosing the Soldano SLO-100. We hope you enjoy playing it for decades to come.
The original Soldano Super Lead Overdrive (SLO-100) set the standard for modern high-gain amplification. Its
searing harmonics, clarity, and sustain have become legendary. It all started in 1987, when Mike Soldano built
one of the first high-gain amplifiers to deliver a perfect balance of gain, harmonics and sustain, with an
unsurpassed touch response. The 100-watt monster found itself backing up renowned rock guitarists like Mick
Mars (Motley Crue), Warren de Martini (Ratt) and Howard Leese (Heart). The normal channel offered modern
clean or bluesy crunch modes, making the SLO-100 a go-to for non-metal stalwarts, such as Mark Knopfler, Eric
Clapton, Warren Haynes, Gary Moore and Lou Reed. Today, the amp’s tone and steadfast reliability remain a
staple for thousands of guitarists around the world.
Your new SLO-100 delivers upon its legendary reputation while incorporating many of the most player-requested
improvements including:
Depth control
Historically, one of the most requested SLO mods is a DEPTH control to the amplifier’s power section which
is now standard. The Depth and Presence controls give players precise global shaping of the amp’s sonic
character.
Improved Noise Floor
The new SLO-100 features a DC heater circuit, eliminating AC ripple through the preamp tubes, creating
an all-but-low-noise high-gain amp without altering its signature tone.
Versatile & Transparent effects loop
The new SLO boasts a new ultra-transparent, tube-buffered effects loop that will handle anything from
vintage pedals to high-powered rack units. For tube purists, who prefer straightforward amp tone, a
hardwire bypass switch is now included, allowing you to completely remove the effects loop from the
circuitry. The new return level control can be used to set up two foot-switchable, preset volume levels.
On-board channel switching
Players familiar with the original SLOs will be elated at our inclusion of an onboard channel-select toggle.
Perfect for applications such as studios, where you don’t want to rely on a footswitch.
Mike Soldano created the SLO-100 to be the best and most versatile amplifier in the world. Over three decades
later, that hasn’t changed a bit. The SLO-100 is proudly hand-crafted in the United States using only the highest-
grade components and is backed by a lifetime warranty. Thank you again for choosing the SLO-100 - we hope
you enjoy playing it for decades to come…
FRONT PANEL
1. INPUT JACK - Plug your guitar in here using a high-quality shielded cable.
2. OVERDRIVE/NORMAL SWITCH - Selects between the NORMAL and OVERDRIVE channels. This
switch is deactivated when using the included footswitch.
3. BRIGHT SWITCH - Adds a slight treble boost to the NORMAL channel.
4. CRUNCH/CLEAN SWITCH - Selects clean or crunch mode for the NORMAL channel.
5. PREAMP:
NORMAL LEVEL - Adjusts the gain of the NORMAL channel
OVERDRIVE LEVEL - Adjusts the gain of the OVERDRIVE channel
6. BASS CONTROL - Adjusts the amount of BASS for both NORMAL and OVERDRIVE channels
7. MIDDLE CONTROL - Adjusts the amount of MIDDLE for both NORMAL and OVERDRIVE channels
8. TREBLE CONTROL - Adjusts the amount of TREBLE for both NORMAL and OVERDRIVE channels
9. MASTER:
NORMAL LEVEL - Adjusts the VOLUME of the NORMAL channel.
OVERDRIVE LEVEL - Adjusts the VOLUME of the OVERDRIVE channel.
10. PRESENCE - Adjusts the amount of high frequencies in the power amp for both NORMAL and
OVERDRIVE channels.
11. DEPTH - Adjusts the amount of low frequencies in the power amp for both NORMAL and OVERDRIVE
channels.
12. STANDBY - A traditional standby switch to keep the tubes warmed up. When first turning ON the
amp, keep in STANDBY for at least 30 seconds before switching to ON. This will allow the circuits to
stabilize.
13. POWER/ON SWITCH - Main AC power switch.
14. POWER INDICATOR - Indicates when the amp is powered up.
REAR PANEL
1. AC MAINS INPUT - Connect to a grounded outlet in accordance with the voltage and frequency
specified on the rear panel of the amplifier.
Use only the factory supplied cord or a UL approved equivalent type.
2. MAINS FUSE - Protects the amplifier from electrical faults.
Warning! Replace only with same fuse type and rating.
3. HT FUSE-HT is the high voltage fuse that protects the amp in case of a power tube failure. If this
fuse blows, most likely a power tube has failed.
Warning! Replace only with same fuse type and rating.
4. LINE OUT- Line level taken from the power amp output, not the preamp. Use a high-quality
shielded guitar cable
5. LINE OUT LEVEL- Adjusts the level of the LINE OUT.
6. SPEAKERS - Two parallel speaker jacks. WARNING: NEVER OPERATE THIS AMPLIFIER
WITHOUT SPEAKER(S), OR A SUITABLE “DUMMY LOAD”, PLUGGED INTO THE
SPEAKER JACK(S). FAILURE TO DO SO WILL RESULT IN OUTPUT TRANSFORMER
FAILURE.
7. IMPEDANCE SWITCH - Set this switch to match the total impedance of you speaker(s).
8. EFFECTS LEVEL CONTROL - Adjusts the overall output level of the amplifier. NOTE: Only active
when EFFECT LOOP is activated
9. EFFECTS LOOP SEND JACK - Use a high-quality shielded guitar cable to connect to the input of
your effects unit.
10. EFFECTS LOOP RETURN JACK - Use a high-quality shielded guitar cable to connect from the
output of your effects unit to the return of the amp.
11. EFFECTS ON/OFF SWITCH: Activates the EFFECTS LOOP. NOTE: This switch is deactivated when
the FOOTSWITCH is in use.
12. FOOTSWITCH: Two button footswitch for CHANNEL select (NORMAL or OVERDRIVE) and LOOP
on/off. Use a TRS cable (Tip=Channel, Sleeve=FX, Shield=Ground).
SOLDANO LIMITED LIFETIME WARRANTY TUBES: Soldano warrants the original purchaser
that the specific tubes used in this Soldano
Thank you for choosing Soldano. We take great product will be free from defects in material and
pride in an extremely thorough testing procedure workmanship for a period of 90 days from the
which is implemented on each product prior to original date of purchase. A dated sales receipt
shipment. In the unlikely event that you have a will establish coverage under this warranty. This
problem with your Soldano product, please refer tube warranty will automatically terminate 90
to warranty below. days after the original retail sales date. This tube
warranty is in lieu of all other expressed
Soldano offers a limited Lifetime warranty to the warranties. If tubes fail within the 90-day
original purchaser that this Soldano product will warranty period, your sole remedy shall be
be free from defects in material and replacement of tubes as provided below.
workmanship. A dated sales receipt will
establish coverage under this warranty, PLEASE RETURN PROCEDURES: In the unlikely event that
KEEP YOUR PROOF OF PURCHASE TO USE a defect occurs please email
YOUR WARRANTY. This warranty does not [email protected]. A member of our staff
cover service or parts to repair damage caused will email you a response in a timely manner.
by accident, neglect, abuse, normal & wear, Please include your phone number in case our
disaster, misuse, abuse, over-powering, customer service department needs to reach you.
negligence, inadequate packing or shipping In most cases we can help you diagnose the
procedures and service, repair or any problem over the phone. If a product must be
modifications to the product which have not sent to us, please follow the procedure outlined
been authorized or approved by SOLDANO in below.
writing. ANY MODIFICATION TO THE • Defective products must be shipped,
AMPLIFIER WILL VOID YOUR WARRANTY. If together with proof of purchase, freight
this product is defective in materials or pre-paid and insured to the Authorized
workmanship as warranted above, your sole Soldano Service Center or directly to
remedy shall be repair or replacement by Soldano.
SOLDANO as provided below. • If a product must be returned to Soldano
for warranty replacement/repair, a
CAUTION: Do NOT attempt to repair, modify Return Authorization Number must be
or service this Soldano product by yourself!!! obtained from our Customer Service
Please read the instruction manual for all safety Department prior to shipping the product.
notifications, warnings and instructions. • Please contact Soldano Customer Service
Soldano utilizes tubes with extremely high Department for the Authorized Soldano
voltages that can cause serious injury or death. Service Center nearest you.
Do not remove the chassis cover from the • Products must be shipped in their original
amplifier. All repair and service work must be packaging or its equivalent; in any case,
performed by Soldano or an authorized service the risk of loss or damage in transit is to
center of Soldano. ANY UNAUTHORIZED be borne by the purchaser.
REPAIRS WILL VOID YOUR WARRANTY.
• Please send to: and exclusion may not apply to you. This
SOLDANO warranty gives you specific legal rights and you
3383 Gage Ave., may also have other rights which may vary from
Huntington Park, CA 90255 state to state.
• The Return Authorization Number must
appear in large print directly below the FOR YOUR PROTECTION: Please complete the
shipping address. warranty registration card within (10) ten days
• Always include a brief description of the of the date of purchase so that we may contact
defect, along with your correct return you directly in the event a safety notification
address and telephone number. issued in accordance with the 1972 Consumer
• When emailing to inquire about a Product Safety Act.
returned product, always refer to the
Return Authorization Number. CUSTOMER SUPPORT: Our dedicated and
friendly staff is ready to help you with any
If Soldano determines that the unit was defective warranty or product questions you may have.
in materials or workmanship at any time during
Please call us at [email protected]
the warranty period, Soldano has the option of
repairing or replacing the product at no
Thank you again for choosing Soldano and we
additional charge, except as set forth below.
look forward to a long relationship!
• All replaced parts become a property of
Soldano. Products replaced or repaired
under this warranty will be returned via
ground shipping within the United States
or Canada - freight prepaid.
• Soldano is not responsible for costs
associated with expedited shipping,
either to Soldano or the return of the
product to the customer.
All warranty repairs outside the United States
and Canada must be directed to the dealer or
distributor from which you purchased the
product.
INCIDENTAL OR CONSEQUENTIAL DAMAGE:
In no event will Soldano be liable for any
incidental or consequential damages arising out
of the use or inability to use of any Soldano
product, even if a Soldano dealer has been
advised of the possibility of such damages, or
any other claim by any other party. Some states
do not allow the exclusion or limitation of
consequential damages, so the above limitation www.Soldano.com
