FEVICOL SA 7505M
------------------------------------------------------------------------------------
PRODUCT DESCRIPTION
Polymer based composition hot melt adhesive.
PHYSICAL PROPERTIES
Property Specifications/Conditions Results
Appearance Visual Yellow
Form Dimensional Pellets/Granules
Melt Viscosity (CPS) @150ºC by Brookfield Thermocel 2200 – 3200 CPS
Softening Point (ºC) By Ring & Ball Method 95 ± 5 ºC
Application Temperature (ºC) Recommended 150 – 170 ºC
APPLICATION AREAS
Fevicol SA 7505 M is a product designed to work on carton making, wraparound, top and bottom flaps pasting,
tray formation, mono carton sealing, overwrapping of paper rolls/reams applications.
FEATURES AND BENEFITS
a) Unique Features: It has a high grab, very good adhesive cut-off, excellent cohesive strength.
b) Benefits to Customer: Fast setting product with very good pot stability. Excellent resistance to oxidation and
colour stability in the melt. No charring hence better machine life.
APPLICATION PROCESS
Fevicol SA 7505 M pellets/granules are placed in hot melt applicator tank which is kept at 150 to 170ºC. Molten
adhesive then flows through the hose nozzle on to the surface which is to be bonded. The adhesive pressure and
temperature is adjusted for adequate glue quantity.
COMPLIANCES: The ingredients used in this product meet the compositional requirements of US F&DA regulation,
Chapter 21, para. 175.105
CLEANING: Preliminary cleaning while hot by scraping with a spatula. Remove any residues when cold with Jowat
Cleaner 402.40
PACKAGING INFORMATION
The product is available in packings of 30 Kg and 5.5 Kg sample
STORAGE AND HANDLING
The Hotmelt Bags must be stored in a cool, dry place at a temperature of around 15-30 ºC and away from dust,
direct heat and sunlight. Bags once opened should be closed properly to avoid contamination from dust and
moisture. Adequate safety measures should be taken while handling hot surfaces to avoid burns and fire hazards.
SUGGESTIONS FOR USE
The properties (e.g. surface tension, plasticiser content) and the conditioning of the substrates, as well as the
processing conditions (e.g. ambient temperature, humidity) will influence the processes of joining and bonding.
Customer tests under consideration of everyday production conditions are therefore absolutely necessary to
define stable process parameters and to ensure that the product is fit for purpose. For best bonding results, the
materials to be bonded should be free of dust, oil and grease and be dry.
DISCLAIMER
The Product information and application details given by the company and its agents has been provided in good faith and meant to serve only
as a general guideline during usage. Users are advised to carry out tests and take trials to ensure on the suitability of products meeting their
requirement prior to full scale usage of our products. Since the correct identification of the problems, quality of other materials used, and on-
site workmanship are factors beyond our control, there are no expresses or implied guarantee/warranty as to the results obtained. The
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
TDS Ref : 009DC372/0.1/26.01.2019 009FR012/1.1/01.01.2019
Pidilite Industries Limited,
Ramkrishna Mandir Road, Post Box No. 17411, Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
website:www.pidilite.com • E-mail:
[email protected] • Toll Free No.: 1800-266-6066
