Scribd
Upload
192 views1 page

Dibutyltin Dilaurate TDS

Dibutyltin Dilaurate is a catalyst suitable for accelerating the cross-linking process of solvent-based two-component polyurethane coatings. It improves drying by favoring the isocyanate/polyol reaction over side reactions. Dibutyltin Dilaurate enhances properties like scratch resistance, hardness, and mechanics. It can aid curing of polyurethanes, silicone resins, and silane modified polymers. The catalyst contains 18.2-18.9% tin and has a viscosity of 1.02-1.07 at 25°C.

Uploaded by

Boro Terakol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
192 views1 page

Dibutyltin Dilaurate TDS

Dibutyltin Dilaurate is a catalyst suitable for accelerating the cross-linking process of solvent-based two-component polyurethane coatings. It improves drying by favoring the isocyanate/polyol reaction over side reactions. Dibutyltin Dilaurate enhances properties like scratch resistance, hardness, and mechanics. It can aid curing of polyurethanes, silicone resins, and silane modified polymers. The catalyst contains 18.2-18.9% tin and has a viscosity of 1.02-1.07 at 25°C.

Uploaded by

Boro Terakol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Dibutyltin Dilaurate

Catalyst for solvent-based two-component polyurethane systems

Physical Characteristics Features


Metal content Sn: 18.2 - 18.9 % • Suitable to accelerate the cross-linking process of solvent
>= 95.00 % ASTM based two-component PU coatings
Non-volatile content • Improves the drying of chemically curing systems favoring the
D 1644
A-3 to C ASTM D isocyanate/polyol reaction over other side reactions such as
Viscosity isocyanate/water
2373
1.02 - 1.07 (25° • Enhances scratch resistance, hardness and mechanical
Specific gravity C) ASTM D properties
1963 • Can be used to aid the curing process of polyurethanes,
Density NA silicone resins, RTV silicone resins and silane modified
polymers
Applications
• Solvent based, chemical cross-linking, two-component coating
o Polyurethane systems

Dosage
NA

Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from sources of ignition. Store in original
container. Store in accordance with local regulations. Keep at temperatures between 5 °C and 30 °C.

Safety
Please refer to our safety data sheet for information relating to product safety.

811 Sharon Drive / Westlake, OH 44145 / Telephone: +1 800-321-9696 / 440-899-2950 / Fax: +1 440-808-7114 / Internet:
www.borchers.com / E-Mail: [email protected]

PLEASE NOTE: As each customer’s use of our product may be different, information we provide, including without limitation, recommendations, test results,
samples, care/labeling/processing instructions or marketing advice, is provided in good faith but without warranty and without accepting any
responsibility/liability. Each customer must test and be responsible for its own specific use, further processing, labeling, marketing, etc. All sales are
exclusively subject to our standard terms of sale posted at www.milliken.com/terms (all additional/different terms are rejected) unless explicitly agreed
otherwise in a signed writing.

Edition: 08/2021

You might also like