ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
| GE-E-700 Pressure Sensitive Adhesive
1. INDENTIFICATION
Trade Name (As Labeled) GE-E-700
Chemical Names: Acrylic Copolymer Mixture
Product Number: GE-E-700
Uses: Acrylic PSA Adhesive
UN Number: None
UN Dangerous /goods Class/Subsidiary Risk: Not-Regulated
Manufacturer's Name: Volunteer Adhesives Corp./ Construction Specialties
Address: 570 Industrial Dr. Lafayette,TN. 37083 USA
Emergency Phone: (800) 424-9300 (CHEMTREC)
Business Phone: (615) 688-3030 (Product Information)
Date of Preparation: 2/21/02
Date of last revision: 9/20/12
2. HAZARD(S) INDENTIFICATION
OSHA Hazards
This product contains no hazardous ingredients as defined under the criteria of the federal OSHA
Hazard Communication Standard 29 CFR 1910.1200.
GHS Classification
Inhalation (Category (2B)
Skin irritation (Category (3)
Eye irritation (Category (4)
Ingestion (Category (4)
Signal Word: Warning
Hazard Statement's
H315 + H320 Causes skin and eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary Statement's
P-261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P-351+P-338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P302 + P352 IF ON SKIN: Wash with soap and water.
HMIS Classification
Health Hazard: 1
Chronic Health Hazard: 0
Flammability: 0
Physical Hazard: 0
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 1
ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
NFPA Rating
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Potential Health Effects
Inhalation: Acute Inhalation - spray mists may cause mild respiratory irritation.
Skin: Acute Skin contact: None Known
Eyes: Acute Eye Contact: Liquid splashed into the eye may cause transient eye irritation.
Ingestion: Acute Ingestion: May cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Symptoms and Effects of Short-Term Exposure: Chronic - None Known
Medical Conditions Generally Aggravated by Exposure: None Known
3. COMPOSITION INFORMATION ON INGREDIENTS
ITEM CHEMICAL NAME CAS NO. EC. No. WT % RANGE
1 Acrylic Copolymer Mixture Proprietary
4. FIRST AID MEASURES
Emergency & First Aid Procedures:
Consult a physician. Show this safety data sheet to the doctor in attendance.
EYE CONTACT: Flush with large quantities of water for at least 15 minutes or until irritation subsides.
Contact a Physician.
SKIN CONTACT: Wash with soap and water, Consult a physician.
INHALATION: Move to fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Contact a Physician immediately.
INGESTION: Consult with physician, hospital emergency room, or poison control center immediately.
Only if conscious, give 2 glasses of water to drink.
NOTE to PHYSICIAN: Any treatment that might be required for overexposure should be directed
at the control of symptoms and the clinical conditions.
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 2
ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
5. FIRE FIGHTING MEASURES
Conditions of Flammability:
Non-Flammable.
Suitable extinguishing media:
Dry chemical, Water spray, Carbon Dioxide.
Hazardous combustion products:
During a fire irritating and toxic gases and aerosols may be generated by thermal decomposition.
Precautions for fire-fighting:
Self-contained breathing apparatus (pressure-demand OSHA/NIOSH approved or equivalent) and
full protective gear may be worn if desired, but not necessary for normal use.
Further Information:
Use water spray to cool unopened containers.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Gloves, and Safety Glasses.
Environmental Precautions:
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and clean up:
Cover spill with absorbent material (sand, sawdust) or precipitate latex with sodium chloride and
remove polymer coagulate.
7. HANDLING AND STORAGE
Precautions for safe handling:
HANDLING INFORMATION: KEEP OUT OF THE REACH OF CHILDREN. Avoid skin
and eye contact. Avoid breathing vapors. Use only in a well-ventilated area.
Storage information:
Storage Temperature: (Min/Max): 7.25 Deg C (45 Deg. F) / 49 Deg. C (120 Deg. F).
Special Sensitivity: High Heat.
Store in a cool, dry place away from food and drink. Keep container tightly closed to prevent loss
of moisture. Avoid subjecting this product to extreme temperature variations and freezing. Adverse
conditions can cause emulsion coagulation. Use appropriate respiratory protection and ensure
efficient exhaust ventilation.
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 3
ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
SDS Components CAS-No. VALUE EXPOSURE GOVERNING BODY
LIMITS
Acrylic Copolymer Mixture TWA 10 ppm USA, OSHA Threshold Limit Values (TLV)
Acrylic Copolymer Mixture STEL 20 ppm USA, OSHA Threshold Limit Values (TLV)
Acrylic Copolymer Mixture TWA 10 ppm USA, ACGIH Threshold Limit Values (TLV)
Acrylic Copolymer Mixture STEL 15 ppm USA, ACGIH Threshold Limit Values (TLV)
Face and Eyes Protection:
Face shield and safety glasses. Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166 (EU)
Skin and Body Protection:
The type of protective equipment must be selected according to the concentration and amount of
the substance at the specific workplace. Always use Protective Gloves and safety glasses.
Special Instructions for Protection and Hygiene:
Minor components will migrate into the container headspace. Levels in excess of the exposure limits
can accumulate in non-vented container headspace. Provide readily accessible eye wash stations and
safety showers. Under normal conditions of use in a well-ventilated space, the concentration of
Minor components in the workplace air will not exceed the exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid, Milky White
Odor: Sweet
PH: Approx. 4.3 (decreases gradually during storage) Based on Chloroprene Monomer
Melting Point/Range Point: Not Established 32 Deg. F for Water.
Boiling Point: 100 C 212 Deg. F at 760 mmHg Based on Chloroprene Monomer
Flash Point: N/A
Evaporation Rate: N/A
Ignition Temperature: N/A
Upper Explosion Limits: N/A
Lower Explosion Limits: N/A
Vapor Pressure: 18.20 mmHg at 70 Deg. F (21 C)
Density: 63.677 ib/ft3 (1.02 g/cm3)
Water Solubility: Dispersible.
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 4
ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
10. STABILITY AND REACTIVITY
Chemical Stability:
Stable. Coagulation may occur following freezing, thawing or boiling.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
None known.
Hazardous Decomposition Products:
Depending upon formulation conditions (such as PH>7), the level of acetaldehyde may increase as a
result of hydrolysis of residual vinyl acetate monomer. (Carbon Dioxide, Carbon Monoxide, Aldehydes,
Acetic Acid).
11. TOXICOLOGICAL PROPERTIES
Acute Health Hazard:
Ingestion: No Data Available.
Inhalation: No Data Available.
Inhalation - components: LC50 (1hr): 5656 ppm Species: Rat.
Vinyl Acetate Monomer
Skin: No Data Available.
Other information on Acute Toxicity:
This product contains small amounts of vinyl acetate monomer. ACGIH evaluated vinyl acetate(1993)
as a A3-Animal Carcinogen. Available evidence suggests that the agent is not likely to cause cancer
in humans except under uncommon or unlikely routes of exposure. The International Agency for
Research on Cancer (IARC) published a monograph on vinyl acetate (1995). In this monograph IARC
indicates "there is inadequate evidence in humans for carcinogenicity of vinyl acetate. There is limited
evidence in experimental animals for carcinogenicity of vinyl acetate. Normally, this lack of conclusive
evidence would place a substance in the IARS Category 3 classification (Not classified as a human
carcinogen). However, because vinyl acetate is metabolized to acetaldehyde, which has an IARC 2B
(Possible carcinogenic to humans) classification, it also has been under Category 2B.
12. ECOLOGICAL INFORMATION
Toxicity:
Aquatic Toxicity: No data is available on the product itself.
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 5
ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
13. DISPOSAL CONSIDERATIONS
Product:
WASTE MANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and Local
Standards. Discarded material should be incinerated at a permitted facility.
Responsibility for waste disposal is with the owner of the waste.
14. TRANSPORTATION INFORMATION
DOT (US):
DOT PROPER SHIPPING NAME: ITEM 4620 Adhesive Class 60, SUB 5
Packing Group: ll
15. REGULATORY INFORMATION
OSHA Hazards:
None.
SARA 312 Components:
SARA 312: No SARA Hazards.
SARA 313 Components:
SARA SECTION 313:
Numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III,
Section 313: Vinyl Acetate
Massachusetts Right to Know Components:
Chloroprene Monomer CAS # Revision Date
Hazardous Substance List. 126-99-8 8/6/12
Pennsylvania Right to Know Components:
Chloroprene Monomer CAS # Revision Date
Non-Hazardous Present @ 3% or greater. 126-99-8 8/6/12
New Jersey Right to Know Components:
Chloroprene Monomer CAS # Revision Date
Health Hazardous Substance List. 126-99-8 8/6/12
California Prop. 65 Components:
This product contains chemicals known to the state of California to cause cancer.
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 6
ARCHITECHURAL PRODUCT SOLUTIONS
SAFETY DATA SHEET
16. OTHER INFORMATION
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 0 REACTIVITY: 0
REASON FOR REVISION: To Correct MSDS Number/Change OSHA Hazcom Information
HAP less water, less exempt solvent: 0.0 gm/1-----------0.0 # Per Gal. where Acetone is exempt.
VOC less water, less exempt solvent: 0.0 gm/1-----------0.0 # Per Gal. where Acetone is exempt.
Product Shelf Life: 6 Months from the date of Mfg. in an unopened sealed container.
This data is offered in good faith as typical value and not as a product specification.
No warranty either express or implied, is hereby made. The recommended industrial hygiene
and safe handling procedures are believed to be generally applicable. However, each user
should review the recommendations in specific context of the intended use and determine
if they are appropriate.
END.
c-sgroup.com Questions? Connect with a CS Representative.
800.233.8493 c-sgroup.com/representative-locator
©Copyright 2021 Construction Specialties, Inc. | SSD.GEE700.0521 | 7
