Scribd
Upload
384 views1 page

HS-420 4-20ma Velocity Sensor - 4 Pin M12 - TS029.9

This document summarizes the specifications and connection details of the HS-420 Accelerometer vibration sensor. It is a 4-20mA velocity output sensor for use with PLC/DCS systems. It has a stainless steel case, IP67 sealing, and operates from -25 to 120°C. Connection is via an M12 connector with pin assignments for 0V, no connection, and +ve power.

Uploaded by

Deividas Rumbinas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
384 views1 page

HS-420 4-20ma Velocity Sensor - 4 Pin M12 - TS029.9

This document summarizes the specifications and connection details of the HS-420 Accelerometer vibration sensor. It is a 4-20mA velocity output sensor for use with PLC/DCS systems. It has a stainless steel case, IP67 sealing, and operates from -25 to 120°C. Connection is via an M12 connector with pin assignments for 0V, no connection, and +ve power.

Uploaded by

Deividas Rumbinas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HS-420 Accelerometer

4-20mA velocity output via M12 Connector

Connection Details

Key Features Pin 4 Pin 3


• For use with PLC/DCS systems 0V No Connection
(Black)
• Customisable features Pin 2
Pin 1 +ve Power
No Connection (White)

ø28mm 4-20mA Power Supply

Industries 68mm 0V +

Building services, Pulp and Paper, 47mm + -


Mining, Metals, Utilities, Automotive, 29mm A/F Pin 4 (Black)
Pin 2 (White)
Water, Pharmaceutical Screen PLC/DCS
to case Earth

Technical Performance Mechanical


Mounted Base Resonance 5kHz min Case Material Stainless Steel
Velocity Ranges see: ‘How To Order’ table ±10% Sensing Element/Construction PZT/Compression
Nominal 80Hz at 22°C Mounting Torque 8Nm
Frequency Response 10Hz (600cpm) to 1kHz (60kcpm) ± 5% - ISO10816 Weight 150gms (nominal) body only
Isolation Base isolated Screened Cable Assembly HS-AC010 - straight
Range 50g peak HS-AC011 - right angle
Transverse Sensitivity Less than 5% Mounting Threads see: ‘How To Order’ table

Electrical Environmental
Current Output 4-20mA DC proportional to Velocity Range Operating Temperature Range -25 to 120ºC
Supply Voltage 15-30 Volts DC (for 4-20mA) Sealing IP67
Settling Time 2 seconds Maximum Shock 5000g
Output Impedance Loop Resistance 600 Ohms max. at 24 Volts EMC EN61326-1:2013
Case Isolation >10 8 Ohms at 500 Volts

Typical Frequency Response Applications


50%
40% Fans, Motors, Pumps, Compressors,
Sensitivity Change %

30%
20% Centrifuges, Conveyors, Air Handlers,
10% Gearboxes, Rolls, Dryers, Presses,
0%
-10% Cooling, VAC, Spindles, Machine Tooling,
-20%
-30% Process Equipment
-40%
Vibration sensor should be firmly fixed to a flat surface
-50%
(spot face surface may be needed to be produced and
1 10 100 1,000 6,000
cable anchored to sensor body.)
Frequency Hz

How To Order

Product Prefix Product Series


HS - Hansford Sensors 420 - Industrial Vibration Sensor

H S 4 2 0 X X X X X X X X

Extra Options (if required) Velocity Range Cable/Connector Mounting Threads


F - Filtered P - Peak Range (RMS unless specified) 01 - PUR 01 - ¼-28” UNF Female
I - Intrinsically Safe PP - Peak to Peak Range 010 - 0-10 mm/sec 02 - Braided 02 - ¼-28” UNF Male
L - 316L Stainless Steel 020 - 0-20 mm/sec 07 - Silicon 05 - Quick Fit Female
RT - Temperature Output PT100 025 - 0-25 mm/sec 08 - Flame Retardant 06 - M6 x 1mm Male
S - 90° Side Exit 050 - 0-50 mm/sec 50 - 2 Pin MS 08 - M8 x 1.25mm Male
T - Temperature Output 100 - 0-100 mm/sec 54 - M12 10 - M10 x 1.5mm Male

www.hansfordsensors.com
[email protected]

We reserve the right to alter the specification of this product without prior notice
TS029.9

You might also like