Scribd
Upload
203 views3 pages

Moog Chassis Tools PDF

This document provides information on various suspension and steering tools. It lists tools for removing and installing ball joints, control arm bushings, tie rods, and other suspension components. Tools include clamps, sockets, punches, breakers, and spanners for working on ball joints, tie rods, struts, and other parts on import vehicles, trucks, and SUVs. Precision tools are also listed for measuring play in ball joints and aligning chassis parts during installation.

Uploaded by

fjaristizabal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
203 views3 pages

Moog Chassis Tools PDF

This document provides information on various suspension and steering tools. It lists tools for removing and installing ball joints, control arm bushings, tie rods, and other suspension components. Tools include clamps, sockets, punches, breakers, and spanners for working on ball joints, tie rods, struts, and other parts on import vehicles, trucks, and SUVs. Precision tools are also listed for measuring play in ball joints and aligning chassis parts during installation.

Uploaded by

fjaristizabal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SUSPENSION TOOLS

T411 21⁄8
SQUARE SOCKET
T412 115⁄16
SQUARE SOCKET
3⁄4 Inch drive, for removal

and installation of
threaded ball joints.

T477 BUSHING DRIVER SET


Eight drivers fit almost all sizes
of control arm bushings.

T458 UPPER ARM


SUPPORT TOOL
For supporting upper arm
during service on upper
spring vehicles.

T40192 C CLAMP PRESS


Ideal for removal and installation of ball joints on
import and front wheel drive passenger cars and
light trucks.

T40193 4 X 4 SLEEVE SET T484 TAPER


Three adaptors use with T40192 BREAKER
to service Spicer axle ball joints. For separating ball
joint tapers on vehicles
with tension loaded
T40201 LIGHT TRUCK SET (not shown) ball joints.
Adaptor set (four pieces) to service late model Ford
truck with long studs.

T475V CHECKING GAUGE


A precision tool for measuring axial
and radial play in ball joints.

Page C-1 Litho in U.S.A.


SUSPENSION TOOLS

TOOLS
T40209 MODIFIED T40211 CAMBER
HOLE SAW ADJUSTING TOOL
Used to enlarge upper strut mounting For use on 1985 and newer GM “C”,
hole on Ford products. Hole “H”, “J” and “L” body vehicles.
enlargement for installation of K8574.
T40222 UPPER CONTROL
ARM PUNCH TOOL
Necessary for removing the alignment
inserts on the upper control arm
brackets without damaging the
brackets. Use on 1989 and later
GM light trucks and vans.

T40212 IMPACT EXTENSION


Aids in removal of torx head bolts holding the rear hub to the axle.
T40224 STRUT SPANNER
NUT SOCKET
(not shown)
To aid in removal and installation of
spanner nut on Volkswagen upper
struts.

STEERING TOOLS

T497 RACK AND PINION INNER T498 RACK AND PINION INNER
TIE ROD TOOL TIE ROD CRIMP TOOL
For removal and installation of inner tie rods Crimps tie rod to rack gear after service.
secured by the crimp method.

Litho in U.S.A. Page C-2


STEERING TOOLS

T482 TIE ROD


SLEEVE TOOL
For toe adjustment
on vehicle using
conventional steering.

T499 INNER TIE ROD PIN


REMOVER
For vehicles which use a hollow roll pin as a
retention device.

T494
Used to seat
matching tapers of T485 TAPER BREAKER
chassis parts when For separating tapers on conventional steering
self locking nuts components.
are used.

T40207 SPANNER SOCKET T493 VICE HOLDING TOOL T40219 INNER TIE ROD
For removal and installation of ball Ideal for supporting struts BUSHING
joint adjusting plug used in open and rack and pinion gears INSTALLATION &
yoke 4 x 4 axles. while performing repairs. REMOVAL TOOL
Use to install EV119 inner tie rod
bushings on GM center take-off type
rack & pinion.

T40221 GM IDLER ARM INSTALLATION T40223 VACUUM BLEEDER ADAPTOR


TOOL (not shown) (not shown)
Use to install K6249 idler arm on 92-82 Firebirds Ford produced vehicles with power steering to assist in
and Camaros. vacuum bleeding power steering system after service.

Page C-3 Litho in U.S.A.

You might also like