2010

Low Noise 7½-Digit

Autoranging Multimeter
The 7½-digit Model 2010 Low Noise Multi­meter ­combines high
resolution with the high speed and accuracy needed for produc-
tion applications such as testing precision sensors, transducers,
A/D and D/A con­verters, regulators, references, connectors,
switches, and relays. It is based on the same high speed, low
noise A/D converter technology as the Models 2000, 2001,
DMM optimized for resistance measurement applications

DMM optimized for resistance measurement applications

and 2002.
High Measurement Flexibility
The 2010 has 15 built-in measurement functions, including DCV,
ACV, DCI, ACI, 2WW, 4WW, dry circuit resistance, temperature
(with either thermocouples or RTDs), frequency, period, ratio,
continuity meas­­ure­ment, and diode testing. This multi-functional
design minimizes added equip­ment costs.
Creating a self-contained multipoint measurement solution is as
• 7½-digit resolution simple as plugging a 2000-SCAN or 2001-TCSCAN scanner card into the option slot in the 2010’s back
panel. This “plug-in” approach ­eliminates the need for a separate scanner and significantly reduces
• 100nV rms noise floor programming and setup time in a­ pplications involving a limited number of test points. For larger
• 7ppm DCV repeatability applications, the 2010 is compatible with Keithley’s Series 7000 switch matrices and cards.

• Built-in 10-channel scanner Unique Resistance Measurement Functions

mainframe Characterizing the resistance, linearity, or isolation of contacts, connectors, switches, or relays
complete­ly and efficiently demands an uncommon combination of ohms measurement capa­bilities.
• Dry circuit and low power The 2010 offers:
measurement mode
• Low-power ohms measurement mode. Low-level resistance measurements can be made with
• 15 measurement functions source current as low as 100µA, an order of magnitude lower than is possible with other DMMs,
including support for RTD and so device self-heating is minimized. Among other benefits, this low-power measurement capability
thermocouple temperature makes the 2010 suitable for end-of-life contact testing per ASTM B539-90.
measurements
• Dry circuit test function. When measuring contact and connector resistances, it is important to
• Built-in ratio measurement control the test voltage carefully in order to avoid puncturing any oxides or films that may have
function formed. A built-in clamp limits the open circuit test voltage to 20mV to ensure dry circuit conditions.
• GPIB and RS-232 interfaces • Offset compensated ohms function. This function eliminates thermal effects that can create
errors in low-level resistance measurements in system environments.
Ordering Information • Extended ohms measurement capability. The 2010 provides a 10W range for more precise
measurements of low resistances.
2010 Autoranging DMM
Optional Multiplexer Cards
ACCESSORIES AVAILABLE
Accessories Supplied Creating a self-contained multipoint measure-
Test Leads
Model 1751 Safety Test Leads, ment solution is as simple as plugging a scanner
5804/5 4-Wire/Kelvin Test Lead Sets
User Manual, Service Manual card into the option slot on the 2010’s back
panel. This ap­proach eliminates the complexities Switch/Scanner Cards
of triggering, timing, and processing issues and 2000-SCAN 10-channel Scanner
helps reduce test time significantly. For appli- 2001-TCSCAN 9-channel Thermocouple Scanner

DIGITAL MULTIMETERS & SYSTEMS

Services Available cations involving more than 10 measurement CABLES/ADAPTERS
2000-SCAN-3Y-EW 1-year factory warranty extended to 3 years points, the 2010 is com­patible with Keithley’s 7007-1 Shielded IEEE-488 Cable, 1m (3.3 ft)
from date of shipment
Series 7000 switch matrices and cards. 7007-2 Shielded IEEE-488 Cable, 2m (6.6 ft)
2001-TCSCAN-3Y-EW 1-year factory warranty extended to 3 years
7009-5 RS-232 Cable
from date of shipment
Model 2000-SCAN Scanner Card RACK MOUNT KITS
2010-3Y-EW 1-year factory warranty extended to 3 years
from date of shipment • Ten analog input channels (2-pole) 4288-1 Single Fixed Rack Mount Kit
C/2000-3Y-ISO 3 (ISO-17025 accredited) calibrations within • Configurable as 4-pole, 5-channel 4288-2 Dual Fixed Rack Mount Kit
3 years of purchase for Model 2000-SCAN*
GPIB Interfaces
C/2001-3Y-ISO 3 (ISO-17025 accredited) calibrations
KPCI-488LPA IEEE-488 Interface/Controller for the PCI Bus
within 3 years of purchase for Model
2001-TCSCAN* KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter
C/2010-3Y-ISO 3 (ISO-17025 accredited) calibrations within
3 years of purchase for Model 2010*
*Not available in all countries

1.888.KEITHLEY (U.S. only)

www.keithley.com
A Greater Measure of Confidence
 2010 Low Noise 7½-Digit
Autoranging Multimeter
DC Voltage True RMS AC Voltage and Current Characteristics
Accuracy 23°C ± 5°C Accuracy (1 Year)
±(ppm of rdg. + ppm of range) Input Frequency 23°C ±5°C
Range Resolution 90 Day 1 Year Resistance Voltage Range Resolution Range ±(% of reading + % of range)
100.00000 mV 10 nV 25 + 9 37 + 9 > 10 GW 3 Hz–10 Hz 0.35 + 0.03
1.0000000 V 100 nV 18 + 2 25 + 2 > 10 GW 10 Hz–20 kHz 0.06 + 0.03
10.000000 V 1 µV 18 + 4 24 + 4 > 10 GW 100 mV to 750 V 0.1 µV to 1 mV 20 kHz–50 kHz 0.12 + 0.05
100.00000 V 10 µV 25 + 5 35 + 5 10 MW ±1% 50 kHz–100 kHz 0.60 + 0.08
1000.0000 V 100 µV 31 + 6 41 + 6 10 MW ±1% 100 kHz–300 kHz 4 + 0.5

Resistance AC Operating Characteristics

Accuracy 23°C ± 5°C
±(ppm of rdg. + ppm of range) Function Digits Readings/s Rate Bandwidth
Range Resolution 90 Day 1 Year Test Current 6½ 0.5 (0.4) SLOW 3 Hz–300 kHz
Model 2010 specifications

Model 2010 specifications

10.000000 W 1 µW 40 + 9 60 + 9   10 mA 6½ 1.4 (1.5) MED 30 Hz–300 kHz
ACV (all ranges), and
100.00000 W 10 µW 36 + 9 52 + 9   1 mA 6½ 4.0 (4.3) MED 30 Hz–300 kHz
ACI (all ranges)
1.0000000 kW 100 µW 33 + 2 50 + 2   1 mA 6½ 2.2 (2.3) FAST 300 Hz–300 kHz
10.000000 kW 1 mW 32 + 2 50 + 2 100  µA 6½ 35 (30) FAST 300 Hz–300 kHz
100.00000 kW 10 mW 40 + 4 70 + 4 10  µA
1.0000000 MW 100 mW 50 + 4 70 + 4 10  µA Frequency and Period Characteristics
10.000000 MW 1 W 200 + 4 400 + 4 640 nA//10 MW Resolution Accuracy
100.00000 MW 10 W 1500 + 4 1500 + 4 640 nA//10 MW ACV Frequency Period Gate ±(ppm of 90 Day/1 Year
Range Range Range Time reading) ±(% of reading)
DC Current 100 mV to 3 Hz to 333 ms to 1s 0.3 0.01
Accuracy 23°C ± 5°C 750 V 500 kHz 2 µs
±(ppm of rdg. + ppm of range) Burden
Range Resolution 90 Day 1 Year Voltage Temperature Characteristics
10.000000 mA 1 nA 300 + 80 500 + 80 < 0.15 V Thermocouple Accuracy 1
100.00000 mA 10 nA 300 + 800 500 + 800 < 0.18 V 90 Day/1 Year (23°C ± 5°C)
1.0000000 A 100 nA 500 + 80 800 + 80 < 0.35 V Relative to USING
3.000000 A 1 µA 1200 + 40 1200 + 40 <1V Type Range Resolution Reference Junction 2001-TCSCAN2
J –200 to +   760°C 0.001°C ±0.5°C ±0.65°C
Continuity 2W K –200 to + 1372°C 0.001°C ±0.5°C ±0.70°C
Accuracy 23°C ± 5°C N –200 to + 1300°C 0.001°C ±0.5°C ±0.70°C
±(ppm of rdg. + ppm of range) T –200 to +   400°C 0.001°C ±0.5°C ±0.68°C
Range Resolution 90 Day 1 Year Test Current 4-WIRE RTD Accuracy 3 Accuracy 3
1 kW 100 mW 100 + 100 120 + 100 1 mA 90 Day/1 Year 2 Years
Range Resolution (23°C ± 5°C) (23°C ± 5°C)
Diode Test –100° to +100°C 0.001°C ±0.08°C ±0.12°C
Accuracy 23°C ± 5°C –200° to +630°C 0.001°C ±0.14°C ±0.18°C
±(ppm of rdg. + ppm of range)
Range Resolution 90 Day 1 Year Test Current
10.000000 V 1 µV 30 + 7 40 + 7 1 mA Temperature Notes
4.400000 V 1 µV 30 + 7 40 + 7 100 µA 1. For temperatures <–100°C, add ±0.1°C and >900°C add ±0.3°C.
2. Specifications apply to channels 2–6. Add 0.06°C/channel from channel 6.
10.000000 V 1 µV 30 + 7 40 + 7 10 µA
3. Excluding probe errors.

DC Operating Characteristics General

Function Digits Readings/s PLCs
7½ 4 (3) 5 Power Supply: 100V / 120V / 220V / 240V.
6½ 30 (27) 1 Line Frequency: 50Hz to 60Hz and 440Hz, automatically sensed at power-up.
DCV (all ranges), 6½ 50 (44) 1 Power Consumption: 22VA.
DIGITAL MULTIMETERS & SYSTEMS

DCI (all ranges), and 5½ 260 (220) 0.1 Volt Hertz Product: ≤8 × 107 V·Hz.
Ohms (<10M range) 5½ 490 (440) 0.1
Operating Environment: Specified for 0° to 50°C. Specified to 80% R.H. at 35°C.
5½ 1000 (1000) 0.04
4½ 2000 (1800) 0.01 Storage Environment: –40° to 70°C.
Altitude: Up to 2000 meters.
DC Noise Performance Safety: Conforms to European Union Directive 73/23/EEC EN 61010-1, Cat II.
RMS Noise RMS Noise EMC: Complies with European Union Directive 89/336/EEC, EN 61326-1.
100mV Range 10V Range Vibration: MIL-PRF-28800F Class 3 Random.
Rate Digits (2 min.) (2 min.) NMRR CMRR Warmup: 2 hours to rated accuracy.
5 PLC 7½ 110 nV 1.2 µV 60 dB 140 dB
Dimensions:
1 PLC 6½ 125 nV 1.4 µV 60 dB 140 dB
0.1 PLC 5½ 1.9 µV 11.5 µV — 80 dB Rack Mounting: 89mm high × 213mm wide × 370mm deep (3½ in × 83⁄8 in × 149⁄16 in).
0.01 PLC 4½ 2.9 µV 139 µV — 80 dB Bench Configuration (with handle and feet): 104mm high × 238mm wide × 370mm
deep (41⁄8 in × 93⁄8 in × 149⁄16 in).
Shipping Weight: 5kg (11 lbs).

1.888.KEITHLEY (U.S. only)

www.keithley.com
A Greater Measure of Confidence