Scribd
Upload
48 views1 page

Blouse Proto Sample Quality Eavluation Report

This document contains measurement specifications for a blouse sample. It includes over 20 separate measurements for the shoulders, bust, waist, sleeves, neckline, and various panel widths and lengths. Tolerance ranges are provided for each measurement.

Uploaded by

Durgesh Tripathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

Blouse Proto Sample Quality Eavluation Report

This document contains measurement specifications for a blouse sample. It includes over 20 separate measurements for the shoulders, bust, waist, sleeves, neckline, and various panel widths and lengths. Tolerance ranges are provided for each measurement.

Uploaded by

Durgesh Tripathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DATE: 19-11-2020 Sample – Proto type

CATEGORY: GA S Code- 17022


DESCRIPTION: GA# BLOUSE TISSUE WOVEN Vendor – MI Designer
T:Id- BLOUSE NO 18
W/LINING V NCK S/L

all measurements in inches M 36 COMMENT tol -


shoulder across 13 +1/8 1/4"
shoulder drop 1.25 OK 1/8"
shoulder overlap 0.75 -1/8 1/8"
across front (5.75" below HPS) 12.25 +1/2 1/4"
across back (5.75" below HPS) 12.75 +3/4 1/4"
bust round (1.25" below armhole) 37 -1 1/2"
A front bust width (measure seam to seam 1.25" below armhole) 19 -1 1/4"
B back bust width (measure seam to seam 1.25" below armhole) 18 OK 1/4"

armhole depth (straight dowm from HPS level) 8.75 -1/4 1/4"
armhole circumference 18.5 +1/2 3/8"
C front bottom width 16.5 -1/2 1/2"
D back bottom width 15.5 +1/2 1/4"
bottom round 32 ok 1/4"
bottom belt panel width at side seam & c.back 1.25 +1/4 1/8"
bottom belt panel width at c.front bottom 2.5/8 +5/8 1/8"
E CF length (measure from front neck drop to hem) 8.3/8 +5/8 1/4"
F CB length (measure from back neck drop to hem) 13.5/8 -5/8 1/4"

NECKLINE
neck width (at HPS edge to edge) 5.5 Total out 1/8"
G front neck drop from HPS level to edge) 8 -2 1/4 1/8"

back neck drop from HPS level to edge 0.25 +1 3/4 1/8"
c.front extension patti width 1.25 -1/2 1/8"
total no. of hook & eye at c.front 7 -2 0
1st hook & eye position from front neck drop 3/16 Not OK 1/8"
last hook & eye position from hem edge 3/16 Not OK 1/8"

FRONT & BACK PANELS


H c.front panel position at armhole from HPS level 7.25 +1 1/8"
J c.back panel position at armhole from HPS level 7 1/8"

c.front panel width at bottom panel seam (measure after placket close) 7 1/8"

c.back panel width at bottom panel seam 6.75 1/8"

You might also like