MODELS 898, 899
Dual-In-Line
Thick Film
Resistor Networks
ELECTRICAL
Standard Resistance Range, Ohms * 10 to 10Meg
Standard Resistance Tolerance, at 25°C ±2% (<33 Ohms = ±2 Ohms)
Optional: ±1% (F Tol.)
Operating Temperature Range -55°C to +125°C
Temperature Coefficient of Resistance ±100ppm/°C (<100 Ohms = ±250ppm/°C) 4
Temperature Coefficient of Resistance Tracking ±50ppm/°C
Maximum Operating Voltage 100Vdc or √PR
Insulation Resistance ≥10,000 Megohms
ENVIRONMENTAL (PER MIL-R-83401)
Thermal Shock plus Power Conditioning ∆R 0.70%
Short Time Overload ∆R 0.50%
Terminal Strength ∆R 0.25%
Moisture Resistance ∆R 0.50%
Mechanical Shock ∆R 0.25%
Vibration ∆R 0.25%
Low Temperature Storage ∆R 0.25%
High Temperature Exposure ∆R 0.50%
Load Life, 1,000 Hours ∆R 1.00%
Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) ∆R 0.25%
Dielectric Withstanding Voltage 200V rms for 1 minute
Temperature Exposure, Maximum 215°C for 3 minutes
Marking Permanency MIL-STD-202, Method 215
Lead Solderability MIL-STD-202, Method 208
Flammability UL-94V-O Rated
Storage Temperature Range -55°C to +125°C
* Plus “0 Ohm” jumper
Specifications subject to change without notice.
4-161 Models 898, 899
MECHANICAL
Lead Material Copper Alloy, 60/40 Tin-Lead (Plating)
Substrate Material Alumina
Resistor Material Cermet
APPLICABLE DOCUMENTS
MIL-R-83401 — Resistor Networks, Fixed, Film, General Specifications
MIL-STD-105 — Sampling Procedures and Tables for Inspection by Attributes
MIL-STD-202 — Test Methods for Electronic and Electrical Component Parts
STANDARD RESISTANCE VALUES, OHMS POWER DISSIPATION, WATTS AT 70°C
-3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors)
——Resistor (Per Circuit)——
22 390 5.6K 100K
Model Package -1 -3 -5
27 470 6.8K 120K
898 2.0 .125 .250 .125
33 510 8.2K 150K
899 1.8 .125 .250 .125
39 560 10K 180K
47 680 12K 200K
51 820 15K 220K
56 1K 18K 270K
68 1.2K 20K 330K
82 1.5K 22K 390K
100 1.8K 27K 470K
120 2K 33K 510K
150 2.2K 39K 560K
180 2.7K 47K 680K
200 3.3K 51K 820K
220 3.9K 56K 1Meg
270 4.7K 68K
330 5.1K 82K
-5 Circuit (Dual Terminators)
R1/R2 R1/R2 R1/R2 R1/R2
180/390 220/330 330/470 3K/6.2K
220/270 330/390 330/680
4-162 Models 898, 899
OUTLINE DIMENSIONS (Inch/mm)
.880
Model 898 Max. Notes:
22.4
.780 Unless otherwise specified,
Model 899 Max. tolerances are .005
19.8 ±
0.13
.250
Ref. .340 ± .020
Max.
6.35 8.64 ± 0.51
.125 .050 .060
Max. Ref. Ref.
3.18 1.27 1.52
.020 .185
Min. Max.
0.51 4.70
.100 ± .010* .135 ± .030
.080 ± .020 2.54 ± 0.25 3.43 ± 0.76
.018 ± .003
2.03 ± 0.51 4
0.46 ± 0.08
.600 ± .010
15.2 ± 0.25
.700 ± .010 *Typical spacing
17.8 ± 0.25 non-accumulating
lead thickness: .010 ± .002
0.25 ± 0.05
SCHEMATICS
-3 Circuit - Isolated Resistors -1 Circuit - Bussed Resistors -5 Circuit - Dual Terminator
N N N
R1
R2
1 N/2 1 N/2 1 N/2
-42 Circuit - 5.2V (VEE) Pull-Down -45 Circuit - TTL to ECL Translator
VCC VEE VCC TTL Inputs
16 16
R R R R R R R1 180Ω
R2 270Ω
R3 820Ω
c R R R R R R
1 1
VCC VEE VCC Outputs To ECL VEE
Custom Model: 898-42-R (R) Custom Model: 898-45
R=510Ω R1=180Ω R2=270Ω R3=820Ω
Note: Model 899: N = 114 Leads, Model 898: N = 16 Leads.
Custom circuits are available. Consult Factory.
4-163 Models 898, 899
TYPICAL PART MARKING
898-3-R10K Date Code
Optional Locations
Lead #1
Indicator Resistance Value
Package Code – # Of Leads Circuit Type: (–1 Bussed)
899 = 14 Leads (–3 Isolated)
898 = 16 Leads (–5 Dual Terminator)
PACKAGING
Standard: Magazines
All Units oriented with lead #1 to the same side.
Magazine: Material = Antistatic Plastic
Capacity = 25 Units
ORDERING INFORMATION
89 9 -5- R220 / R330 F
Model Series Tolerance Code:
Number of Leads: F = ±1%
9 = 14 Leads (No code used for standard tolerances.)
8 = 16 Leads
R2 Resistance Value:
Circuit Type: (Add for -5 circuit only)
3 = Isolated
1 = Bussed
5 = Dual Terminator
Resistance Value
4-164 Models 898, 899
