Page 1/9
Estimated Cost :- Rs. 38,34,397=00 E.M. to be deposited :- ` 76700=00
Last Date of downloading tender paper:- 30.05.2023 upto 3:00 p.m. Cost of B.O.Q :- ` 5000=00
Last Date of Receiving Tender :- 01.06.2023 upto 3:00 p.m. Time of Completion :- 60 Days
Sl.No. Item of Work Quantity unit Rate Amount
(1). Labour for clearing jungle & site clearance inc.all
complete job
0L01 Labour 10 + 10 + 6 = 26 no @ 398.05 /each ` 10349=00
(2). Earth work in excavation in foundation trenches or
drains(not exceeding 1.5 m in width or 10 sqm on
plan) including dressing of sides and ramming of
bottoms, lift upto 1.5 m . including getting out
the excavated soil and disposal of surplus excavated
soil as directed, within a lead of 50 m
2.8.1
47.70 + 47.70 + 13.73 = 109.13 m3 @ 360.70 /m3 ` 39363=00
(3). Supplying and Filling in plinth with local sand and
under floors including, watering, ramming
consolidating and dressing complete.
2.28
64.18 + 104.68 + 29.68 = 198.54 m3 @ 281.40 /m3 ` 55869=00
(4). Providing designation 100 A one brick flat soling
joints filled with local sand including cost of
watering, taxes, royalty all complete as
per building specification and direction of E/l,
11.72
90.30 + 157.80 + 82.45 330.55 m2 @ 283.30 /m2 ` 93645=00
(5). Providing designation 100 A one brick on edge
soling joints filled with local sand including cost of
watering, taxes, royalty all complete as per
building specification and direction of E/l,
11.72
202.50 + 135.00 + 0.00 337.50 m2 @ 444.80 /m2 ` 150120=00
(6). Providing and laying cement concreate in kerbs,
steps and the like at or near ground level excluding
the cost of centring, shuttering and finishing.
4.1.3 1:2:4 (1 Cement :2 coarse sand :4 grade stone
aggregate 20 mm nominal size)
1.080 + 7.83 + 4.467 = 13.377 m3 @ 3998.10 /m3 ` 53483=00
(7). Centring and shuttering including strutting,propping
etc. and removal of
form for.
a. plinth beams, griders, bressumers and contilevers.
5.9.5 21.90 + 21.90 + 6.08 = 49.880 m2 @ 404.70 /m2 ` 20186=00
(8). Providing and laying in position specified grade of
reinforced cement concrete excluding the cost of
centring,shuttering,finishing and reinforcement-All
work puto plinth level
Page 2/9
1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone
aggregate 20 mm nominal size)
5.1.2 14.50 + 14.50 + 4.19 = 33.19 m3 @ 4,688.30 /m3 ` 155605=00
(9). Brick work with bricks of class designation 100A in
foundations and plinth in : Cement mortar 1 .:4 (1
cement: 4 coarse sand )
6.1.12/1
17.33 +17.33 + 5.53 = 40.19 m3 @ 5,017.90 /m3 ` 201669=00
(10). Centring and shuttering including strutting,propping
etc. and removal of
form for.
a. Lintels
5.9.5 36.28 + 36.28 + 11.44 = 84.00 m2 @ 404.70 /m2 ` 33995=00
b. Columns,Pillars, Piers, Abutments, Posts and Struts
5.9.6 24.00 + 24.00 + 12.00 = 60.00 m2 @ 494.40 /m2 ` 29664=00
(11). Reinforced cement concrete work in wall (any
thickness), including attached pilasters, buttresses,
plinth and string courses, fillets, columns, pillars,
piers, abutments, posts and struts, etc. upt floor five
level excluding cost of
centring, shuttering, finishing and reinforcement.
5.2.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone
aggregate 20mm nominal size)
3.30 + 3.30 + 1.32 = 7.92 m3 @ 5,670.00 /m3 ` 44906=00
(12). Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position
and binding all complete.
(i) TMTC-415 8 mm dia 333.75 + 333.75 + 103.25 = 770.75 kg @ 94.50 /kg ` 72836=00
5.22.7 A
(ii) TMTC-500 10mm dia 600.75 + 600.75 + 185.85 = 1,387.35 kg @ 92.60 /kg ` 128469=00
5.22.7B
(iii) TMTC-500-12mm dia. 400.50 + 400.50 +123.90 = 924.90 kg @ 90.80 /kg ` 83981=00
5.22.7C
(13). Brick work with bricks of class designation 100A in
foundations and plinth in : Cement mortar 1:6 (1
cement: 6 coarse sand ) Extra for Brick work in
superstructure above plinth level upto floor V
6.1.14A + 6.3A
28.24 + 28.24 +8.78 = 65.26 m3 @ 5,662.10 /m3 ` 369509=00
(14). Providing and fixing angle iron frames for doors,
windows and kg 74.60 ventilators of mild steel Angle
sections of size 35x35x5 mm, joints mitred and
welded by angle iron 35x35x5 mm or 35x 5 mm flat
pieces to the existing T-iron frame or to the wall with
dash fastener, including fixing of necessary butt
hinges and screws and applying a priming coat of
approved steel primer, all complete as per the
direction of Engineer-In-charge
10.44
299.52 + 299.52 + 132.60 = 731.64 Kg. @ 101.30 /Kg. ` 74115=00
Page 3/9
(15). Steel work welded in built up sections/framed work
including cutting hoisting, rixing in position
andapplying a priming coat of approved steel primer
using structural steel, etc. as required. In gratings,
frames, guard bar, ladders, railings, brackts. gates &
similar works.
10.32.2
60.48 + 60.48 + 43.20 = 164.16 Kg @ 114.60 /Kg ` 18813=00
(16). Providing and fixing M.S. grills of required pattern in
frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat
with approved steel primer all complete
9.48.2
277.02 + 277.02 + 34.02 = 588.06 Kg @ 161.10 /Kg ` 94736=00
(17). Providing and fixing hard drawn steel wire fabric
75x25 mm mesh of weight not less than 7.75 Kg per
sqm to window frames etc. Including 62x19 mm
beading of second class teak wood and priming coat
with approved steel primer all complete.
9.50 37.17 + 37.17 + 26.65 = 100.99 m2 @ 1,291.30 /m2 ` 130408=00
(18). Steel work in built up tubular trusses including
cutting, hoisting, fixing in position and applying a
priming coar of approved steel primer, welded
and bolted including special shaped washers etc.
complete: Hot finished welded type tubes
10.16.1
690.59 + 690.59+ 401.77 = 1,782.95 Kg. @ 123.90 /Kg. ` 220908=00
(19). Providing asbestos cement 6 mm thick corrugated
sheets roofing and fixing with G.I. J or L hooks bolts
and nuts 8 mm dia G. I. plain and bitumen washers
complete excluding the cost or purlins, rafters and
trusses corrugated sheet.
12.10.1
96.00 + 96.00 + 70.00 = 262.00 m2 @ 371.70 /m2 ` 97385=00
(20). Providing and fixing ridges and hips in asbestos
cement sheet roofing Close fitting adjustable ridges
consider a shed 20x10 metre
(External dimension at plinth
12.14.3 15.00 + 15.00 + 10.00 = 40.00 m @ 396.00 /m ` 15840=00
(21). Extra for providing and fixing wind ties of 40x6mm
flat iron section
12.13 120.00 + 120.00 + 60.00 = 300.00 m @ 147.80 /m ` 44340=00
(22). 12 mm th.C.P. of mix (1:6) including all complete job
13.11.4
750.26 + 750.26 + 181.37 = 1,681.89 m2 @ 141.50 /m2 ` 237987=00
(23). 12 mm cement plaster 1:3( 1 cement: 3 coarse sand)
finished with a floating coat of neat cement
13.17.1
66.60 + 66.60 + 74.72 = 207.92 m2 @ 203.60 /m2 ` 42333=00
(24). Finishing walls with water proofing cement paint of
approved brand and manufacture and of required
shade to give an even shade New
work (three or more coats)
13.79.1
750.26 + 750.26 + 0.00 1,500.52 m2 @ 81.20 /m2 ` 121842=00
Page 4/9
(25). Painting with ready mixed paint of approved brand
and manufacture in all shades to give an even
shade:
13.82.1/13.82.2
70.88 + 70.88 + 46.04 = 187.80 m2 @ 83.50 /m2 ` 15681=00
(26). Providing 250mm wide brick drain in cement mortar
(1:6) with av.150mm. Clear depth and 250mm apron
including cost of E/W. involved
with 75mm cement concrete (1:4:8) over one brick
designation 100-Aflat soling in proper grade and
slope at the base.the drain duly.plastered
in CM. (1:3) with punning over exposed surface all
complete as per building specification and direction
of E/l,
6.47A
30.49 + 30.49 + 0.00 = 60.98 m @ 1087.90 /m ` 66340=00
(27). Constructing brick masonry road gully chamber
50x45x60 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand) including 500x450 mm pre-
cast R.C.C. horizontal grating with frame
complete as per standard design : With common
burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.27.1
5+5+4= 14 no @ 3743.30 /each ` 52406=00
(28). Making soak pit 2.5 m diameter 3.0 metre deep with
45 x 45 cm dry brick honey comb shaft with bricks
and S.W. drain pipe 100 mm diameter, 1.8 m long
complete as per standard design. With common
burnt clay F.P.S. (non modular) bricks of
class designation 7.5
19.32.1
1+1+0= 2 no @ 33603.40 /each ` 67207=00
(29). Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, havingthermal stability for hot & cold
water supply including all CPVC plain &brass
threaded fittings This includes jointing of pipes &
fittings with onestep CPVC solvent
cement ,trenching ,refilling & testing of joints
completeas per direction of Engineer in Charge.
External work
18.9.2 a. 20 mm nominal outer dia Pipes 60.00 m @ 197.40 /m ` 11844=00
18.9.3 b. 25 mm nominal outer dia Pipes 90.00 m @ 265.30 /m ` 23877=00
(30). Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
18.17.1 a. 25 mm nominal bore 8 no @ 532.30 /each ` 4258=00
(31). Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :
18.49
6+6+0= 12.00 no @ 434.20 /each ` 5210=00
(32). Carriage of materials including all complete job
a. Sone Sand ( Lead 45 Km.) 85.63 m3 @ 1,134.70 /m3 ` 97164=00
b. Stone Chips (Lead 110 Km.) 49.59 m3 @ 2,427.53 /m3 ` 120381=00
Page 5/9
c. Bricks Lead (1+7) Km. 76,030 no. @ 1,140.59 %0 no. ` 86719=00
d. Local Sand (Lead 3 Km.) 213.78 m3 @ 283.32 /m3 ` 60568=00
(33). Extra cost of materials
a. Bricks 76,030 no. @ 1,590.97 %0 no. ` 120961=00
b. Cement 768 bag @ 13.13 /bag ` 10084=00
(34). Finishing walls with water proofing cement paint of
approved brand and manufacture and of required
shade to give an even shade New
work (three or more coats) Applying one coat of
cement primer of approved brand and
manufacture on wall surface: Cement primer
13.78.1 + 13.79.1
0.00 + 0.00 + 181.37 = 181.37 m2 @ 119.80 /m2 ` 21728=00
(35). Providing and fixing G.I. pipes complete with G.I.
fittings and clamps, i/c cutting and making good the
walls etc.
18.12.3
a. 25 mm dia G.I. pipe 30.00 m @ 342.00 /m ` 10260=00
(36). Providing and placing on terrace (at all floor levels)
polyethylene water storage tank, ISI : 12701 marked,
with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for
tank.
18.48 2,000 lit. @ 9.70 /lit. ` 19400=00
(37). Providing and fixing PTMT extension nipple for water
tank pipe, fittings of approved quality and colour.
18.75.3
a. 25mm nominal bore, weighing not less than 62 gms 6 no @ 100.60 /each ` 604=00
(38). Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all
CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints
complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.2 20 mm nominal outer dia Pipes 36.00 m @ 233.90 /m ` 8420=00
18.7.3 25 mm nominal outer dia Pipes 15.00 m @ 317.30 /m ` 4760=00
18.7.4 32 mm nominal outer dia Pipes 30.00 m @ 395.20 /m ` 11856=00
(39). Providing and fixing G.I. Union in G.I. pipe including
cutting and threading the pipe and making long
screws etc. complete (New work) :
18.46.1 a. 15 mm nominal bore 4 no @ 158.80 /each ` 635=00
18.46.3 b. 25 mm nominal bore 4 no @ 265.90 /each ` 1064=00
(40). Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
18.17.1 a. 25 mm nominal outer dia Pipes 4 no @ 532.30 /each ` 2129=00
Page 6/9
(41). Making connection of G.I. distribution branch with
G.I. main of following sizes by providing and fixing
tee, including cutting and threading the pipe etc.
complete :
18.13.1
a. 25 to 40 mm nominal bore 6 no @ 446.70 /each ` 2680=00
(42). Providing and fixing brass stop cock of approved
quality : 15 mm nominal bore
18.16.1
6 no @ 303.80 /each ` 1823=00
Page 7/9
(43). Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :
18.49
8 no @ 434.20 /each ` 3474=00
(44). Cutting holes up to 30x30 cm in walls including
making good the same: With common burnt clay
F.P.S. (non modular) bricks
18.76.1
9 no @ 198.50 /each ` 1787=00
(45). Providing and fixing Stainless Steel A ISI 304 (18/8)
kitchen sink as per IS : 13983 with C.I. brackets and
stainless steel plug 40 mm, including painting of
fittings and brackets, cutting and making good the
walls wherever required : Kitchen sink without drain
board
610x510 mm bowl depth 200 mm
17.10.2.1
1 no @ 3786.60 /each ` 3787=00
(46). Providing and fixing on wall face unplastidsed-PVC
pipes with accessories incl…job
12.78.2 110 mm dia PVC Pipe 42.00 m @ 257.50 /m ` 10815=00
12.79.3.2 110 mm tee 6 no @ 193.40 each ` 1160=00
12.79.4.2 110 mm tee 4 no @ 190.70 each ` 763=00
12.79.5.2 110 mm bend 10 no @ 132.00 /each ` 1320=00
Electrical Works
(47). Wiring for light point /fan point /exhaust fan point/
call bell point with 1.5 sq. mm FR PVC insulated
copper conductor single core cable in surface /
recessed medium class PVC conduit with piano type
switch, phenolic laminated sheet, suitable size
M.S./PVC box etc. as required
1.1.3 Group 'C'
50 + 50+20 = 120 Pt. @ 681.00 /Point ` 81720=00
(48). Wiring for light/ power plug with 2 X 4 sq. mm FR
PVC insulated copper conductor single core cable in
surface/ recessed medium class PVC conduit along
with 1 Nos. 4 sq. mm FR PVC insulated copper
conductor single core cable for loop earthing as
required.
1.5
150 +150 + 40 = 340 m @ 200.00 /Meter ` 68000=00
(49). Wiring for circuit/ submain wiring alongwith earth
wire with the following size of PVC insulated copper
conductor single core cable in surface/ recessed
medium class PVC conduit as required.
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
120+120 + 30 = 270 m @ 161.00 /Meter ` 43470=00
(50). Supplying and fixing metal/ pvc box of 180 mm X 100
mm X 60 mm deep (nominal size) on surface or in
recess with suitable size of phenolic laminated sheet
cover in front including providing and fixing 6 pin 5/6
&15/16 amps socket outlet and 15/16 amps piano
type switch, connections, painting etc. as required.
1.30
10 + 10 + 4 = 24 no @ 286.00 /Each ` 6864=00
Page 8/9
(51). Supplying and fixing following piano type switch/
socket on the existing switch box/ cover including
connections etc. as required.
1.23.9 Electronic step fan regulator, piano type
8+0+0= 8 no @ 204.00 /Each ` 1632=00
(52). Supplying and fixing 2 pin, 6 amp ceiling rose on the
existing junction box/ wooden block including
connection etc. as required.
1.33
40+ 40 + 20 = 95 no @ 42.00 /Each ` 3990=00
(53). Supplying and fixing batten/ angle holder including
connection etc. as required.
1.34 10 + 10 + 5 = 25 no @ 46.00 /Each ` 1150=00
(54). Suplying and fixing following way single pole &
neutral, sheet steel, MCB distribution board, 240
volts on surface/ recess, complete with tinned
copper bus bar, neutral bus bar, earth bar, din bar,
interconnections, powder painted including earthing
etc. as required. (But without MCB/ RCCB/ Isolator)
2.8.7 2 + 6 way Double door
1+1+1= 3 no @ 1081.00 /Each ` 3243=00
(55). Supplying and fixing following rating, 240/415 volts,
"C" curve, miniature circuit breaker suitable for
inductive loads of following poles in the existing
MCB DB complete with connections, testing and
commissioning etc. as required.
2.12.1 6/32 amps, Single pole
6+6+6= 18 no @ 192.00 /Each ` 3456=00
2.12.3 40 amps, Single pole and neutral
1+1+1= 3 no @ 729.00 /Each ` 2187=00
(56). Supplying and fixing single wall mounted 18/22 watt
LED type batten fitting complete with electronic
driver and LED tube etc. directly on wall/ ceiling
including connections with 1.5 sq. mm FR PVC
insulated copper conductor and earthing the body
etc. as required.
5.9.3 25 + 25 + 13 = 63 no @ 684.00 /Each ` 43092=00
(57). Supplying and fixing 90 watt LED type FLOOD light
with die cast aluminium housing for ingress
protection of IP65 and complete with all accessories
etc. and connection with FR PVC insulated copper
conductor cable and earthing the body etc. as
required.
5.13.10 3+3+2= 8 no @ 8,501.00 /Each ` 68008=00
(58). Supply and installation of regular/standard model
A.C. ceiling fan of 1400 mm sweep including wiring
the down rods of standard length ( upto 30 cm) with
1.5 sq. mm FR PVC insulated copper conductor etc.
as required.
8.11.3 8 + 0+ 0 = 8 no @ 1758.00 /Each ` 14064=00
Total ` 3834397=00
Page 9/9
Estate Officer
B.A.S.U., Patna
