Scribd
Upload
29 views1 page

Img 20230410 0005

A disk with a radius of 2 meters is initially at rest with two masses attached at different distances from the pivot point. Mass 1 is 25 kg at 0.5 m from the pivot and mass 2 is 20 kg at 0.1 m from the pivot. The forces on the disk need to be drawn and labeled.

Uploaded by

Brent
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views1 page

Img 20230410 0005

A disk with a radius of 2 meters is initially at rest with two masses attached at different distances from the pivot point. Mass 1 is 25 kg at 0.5 m from the pivot and mass 2 is 20 kg at 0.1 m from the pivot. The forces on the disk need to be drawn and labeled.

Uploaded by

Brent
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Exam 3 Practice Exam

6 Extra Credit point toward Exams

A disk with a radius of 2 mis sitting at initially at rest. It has two masses dangling from it as
shown in the picture below. Mass 1 is 25 kg and sits at 0.5 m from the pivot point while mass 2
has 20 kg and sits only 0.1 from the pivot point. The pivot point is located 0.8 m from the left
side of the disk. The disk has a mass of 10 kg.
Note: though the pivot point is off center, use the moment of inertiafor u disk that is pivoted
in the center and the mosses fire on rotational screws that ullows them to remain in their
location while the disk rotates.

Pivot point

Ring
stand

a. Draw and label all forces acting on the disk.

A :'! tt..
o--- -
t*

/
,t

('
kh lq
'I \o(
't)

You might also like