Data sheet
SAKT E/35 2GL 230VAC Weidmüller Interfaces GmbH & Co. KG
Postfach 3030
32760 Detmold
Tel. +49 5231 14-0
Fax. +49 5231 14-2083
[email protected] Product image
www.weidmueller.com
Why not integrating simple electrical functions into a feed
through terminal. It has the same slim design of our feed-
through terminal blocks - with additional functions such
as cross-connections that can be used. Often, you only
need a small component to integrate an external device
into your automation technology. Our modular terminal
blocks with electronic components make this possible;
quickly, simply, and with a perfect fit.
General ordering data
Version SAK Series, Test-disconnect terminal, Rated cross-
section: 6 mm², Screw connection, medium
yellow, Direct mounting
Order No. 0198120000
Type SAKT E/35 2GL 230VAC
GTIN (EAN) 4008190002916
Qty.
5 pc(s).
Creation date May 17, 2023 3:52:03 PM CEST
Catalogue status 12.05.2023 / We reserve the right to make technical changes. 1
Data sheet
SAKT E/35 2GL 230VAC Weidmüller Interfaces GmbH & Co. KG
Postfach 3030
32760 Detmold
Technical data Tel. +49 5231 14-0
Fax. +49 5231 14-2083
Dimensions and weights
[email protected] Depth 52.5 mm Depth (inches) 2.067 inch
www.weidmueller.com
Height 65 mm Height (inches) 2.559 inch
Width 16 mm Width (inches) 0.63 inch
Net weight 63.82 g
Temperatures
Storage temperature -25 °C...55 °C Continuous operating temp., min. -60 °C
Continuous operating temp., max. 130 °C
Material data
Material KrG Colour medium yellow
UL 94 flammability rating V-0, 5VA
System specifications
Version Screw connection, Special End cover plate required
terminal longitudinal
isolator, With glow lamp,
for screwable cross-
connection Yes
Number of potentials 1 Number of levels 1
Number of clamping points per level 4 Number of potentials per tier 1
Levels cross-connected internally No PE connection No
Rail TS 35 N-function No
PE function No PEN function No
Additional technical data
Installation advice Direct mounting Open sides right
Type of mounting Snap-on
Conductors for clamping (rated connection)
Blade size 4.0 x 0.8 mm Clamping range, max. 10 mm²
Clamping range, min. 0.5 mm² Clamping screw M 3.5
Connection direction on side Gauge to IEC 60947-1 A5
Number of connections 2 Stripping length 12 mm
Type of connection Wire connection cross section, finely
Screw connection stranded, max. 6 mm²
Wire connection cross section, finely Wire connection cross-section, finely
stranded, min. stranded with wire-end ferrules DIN
0.5 mm² 46228/1, max. 6 mm²
Wire connection cross-section, finely Wire connection cross-section, finely
stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN
46228/1, min. 0.5 mm² 46228/4, max. 6 mm²
Wire connection cross-section, finely Wire connection cross-section, solid
stranded with wire-end ferrules DIN core, max.
46228/4, min. 0.5 mm² 10 mm²
Wire connection cross-section, solid
core, min.
0.5 mm²
General
Installation advice Direct mounting Rail TS 35
Creation date May 17, 2023 3:52:03 PM CEST
Catalogue status 12.05.2023 / We reserve the right to make technical changes. 2
Data sheet
SAKT E/35 2GL 230VAC Weidmüller Interfaces GmbH & Co. KG
Postfach 3030
32760 Detmold
Technical data Tel. +49 5231 14-0
Fax. +49 5231 14-2083
Rating data
[email protected] Rated cross-section 6 mm² Rated voltage 230 V
www.weidmueller.com
Rated current 27 A Current at maximum wires 27 A
Volume resistance according to IEC Power loss in accordance with IEC
60947-7-x 0.78 mΩ 60947-7-x 1.31 W
Pollution severity 3
Classifications
ETIM 6.0 EC000902 ETIM 7.0 EC000902
ETIM 8.0 EC000902 ECLASS 9.0 27-14-11-26
ECLASS 9.1 27-14-11-26 ECLASS 10.0 27-14-11-26
ECLASS 11.0 27-14-11-26 ECLASS 12.0 27-14-11-26
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of EAC certificate
Conformity Declaration of Conformity
CE Declaration of Conformity all terminals
Engineering Data WSCAD, EPLAN
User Documentation StorageConditionsTerminalBlocks
Catalogues
Catalogues in PDF-format
Creation date May 17, 2023 3:52:03 PM CEST
Catalogue status 12.05.2023 / We reserve the right to make technical changes. 3
