Smart LV Solution

Smart Trip Unit Smart ACB

Advanced Trip Relay!

With the world's best measurement accuracy and increased relay elements, the relay operation stability is enhanced,
and the abnormal self-diagnosis function prevents mis-trips and ensures the stability of abnormal conditions through Types of STU Type N Type A Type P Type S

alarms.
NFC and Bluetooth built-in and Smart add-on modules can be configured. Monitoring and monitoring is possible
through service access anytime, anywhere by securing a Smart LV solution through ICT convergence technology.

Exterior

STU function-specific series

N type
• Device operation through self-power
• Current relay function
• L (N), S, I, G, PTA, Gext • L (N), S1, S2, I, G, PTA, Gext
• Supports USB communication Current relay • L (N), S, I, G, PTA • L (N), S, I, G, PTA, Gext
• D, S (V), IU • D, S (V) 1, S (V) 2

• UV1, UV2, OV1, OV2, RV,

A type Voltage relay • UV, OV, RV, VU
VU

• Device operation through self-power • UF1, UF2, OF1, OF2,

Frequency relay • UF, OF, ROCOF
• Device operation via AC or DC ROCOF
• Current relay function
• Segment LCD Display Power relay • RP, RQ, OP, OQ, UP • RP, RQ1, RQ2, OP, OQ, UP
• DO output
• Supports USB communication Group control
• A, B (can be changed by
• Supports RS485 communication communication)

Relay fine
• L, S, I Pickup current
adjustment

P type ERMS
• Control by DI and • Control by DI and • Control by DI and
communication communication communication
• Device operation through self-power
• Device operation via AC or DC • Supports L relay element • Supports L relay element • Supports L relay element • Supports L relay element
IDMTL support Thermal and DT, SIT, VIT, Thermal and DT, SIT, VIT, Thermal and DT, SIT, VIT, Thermal and DT, SIT, VIT,
• Current/voltage/frequency/power
EIT, EIT50 EIT, EIT50 EIT, EIT50 EIT, EIT50
relay function
• 3.5” Graphic Display
Trip information
• DO output maintenance LED
• L, S, I, G/PTA, SP • L, S, I, G/Gext/PTA, SP • L, S, I, G/Gext/PTA, SP • L, S, I, G/Gext/PTA, SP
• Supports USB communication
• Supports RS485 communication • 32 accident events • 127 accident events • 127 accident events
Screen indicated [Accident phase/ indicated [Accident phase/ indicated [Accident
current/time] current/time] phase/current/time]

S type Accident • 127 accident events

• 127 accident events • 127 accident events
record • 127 accident events indicated
indicated indicated
• Device operation through self-power indicated [Accident phase/ • 6 accident events
Memory • 6 accident events indicated • 6 accident events indicated
current/time] indicated
• Device operation via AC or DC [Does not support Self- [Does not support Self-
[Does not support Self-
• Current/voltage/frequency/power relay power] power]
power]
function
• 3.5” Graphic Display
• DO output
• Relay setting group A/B available
• Supports USB communication
• Supports RS485 communication
• NFC/BLE communication support

32 33
 Smart LV Solution
Smart Trip Unit Smart ACB

STU types and Type N Type A Type P Type S Type N Type A Type P Type S

main functions • Current [R/S/T/N] • Current [R/S/T/N] • 3-phase phase voltage, • 3-phase phase voltage, • USB [for on-site operator] • USB [for on-site operator] • USB [for on-site operator] • USB [for on-site operator]
• Current phase (A phase • External CT current line voltage line voltage (Communication type • RS485 / Modbus • RS485 / Modbus • RS485 / Modbus
Communication
current standard) • Current phase (Based • Current [R/S/T/N] • Current [R/S/T/N] only) (Communication type • BLE
• Vector sum image on phase A current) • Frequency • Frequency only) • NFC
current • Vector sum image • External CT current • External CT current
• [Operation when 30% • [Operation when 30% • [Operation when 30% • [Operation when 30%
• Normal and reverse current • Voltage/current phase • Voltage/current phase
or more of rated current, or more of rated current, or more of rated current, or more of rated current,
phase current • Normal and reverse (Based on phase A voltage) (Based on phase A voltage)
based on single-phase based on single-phase based on single-phase based on single-phase
• Current imbalance rate phase current • Total/each phase power [P, Q, S] • Total/each phase power [P, Q, S]
Power load standard] load standard] load standard] load standard]
• Current demand before • Current imbalance rate • Total/each power factor • Total/each power factor
• AC/DC 88 ~ 264V • AC/DC 88 ~ 264V • AC/DC 88 ~ 264V
each phase • Current demand before • Positive/reverse, effective/ • Positive/reverse, effective/
• DC 24 ~ 48V(Future • DC 24 ~ 48V(Future • DC 2 4~ 48V(Future
each phase invalid/apparent energy invalid/apparent energy
development) development) development)
Measurement • Vector Sum image voltage • Vector Sum image voltage
function • Vector sum image current • Vector sum image current • 255 device status changes • 255 device status changes • 255 device status changes • 255 device status changes
Event record
• Normal and reverse phase • Normal and reverse phase [Details, status, date] [Details, status, date] [Details, status, date] [Details, status, date]
voltage voltage
• Normal and reverse phase • Normal and reverse phase • RTC built-in • RTC built-in • RTC built-in • RTC built-in
Clock
current current (Back up with battery) (Back up with battery) (Back up with battery) (Back up with battery)
• Voltage unbalance rate • Voltage unbalance rate
• Run, alarm, • Run, alarm, • Run, alarm, • Run, alarm,
• Current imbalance rate • Current imbalance rate Other LED
Self-diagnosis, comm. Self-diagnosis, comm. Self-diagnosis, comm. Self-diagnosis, comm.
• Current demand before • Current demand before
each phase each phase
• Reset button • Reset/menu/tap/up/ • Reset button • Reset button
• Demand on the last • Demand on the last Operation button
down/enter • LCD Touch • LCD Touch
apparent, reactive, apparent, reactive,
or active power or active power • RUN/AL LED flashing • RUN/AL LED flashing • RUN/AL LED flashing • RUN/AL LED flashing
LED
(Red ↔ Blue flashing) (Red ↔ Blue flashing) (Red ↔ Blue flashing) (Red ↔ Blue flashing)
Current 0.5% 0.5% 0.5% 0.5%
Displays the corresponding Can be checked on the Can be checked on the
Voltage 0.5% 0.5%
LCD segment or error number on LCD self-diagnosis screen LCD self-diagnosis screen
Measurement
class 1.0 class 1.0 the LCD
accuracy
Power
(IEC 62053 - 21, 22) (IEC 62053 - 21, 22)
• Battery Low Alarm : Occurs when the internal battery is not inserted or when the battery voltage is low
• Rating Plug Unattached or Error : Occurs when rating plug is not assembled or when there is rating plug error
Frequency 50, 60 Hz device classification 50, 60 Hz device classification 0.1% (10 ~ 200Hz) 0.1% (10 ~ 200Hz)
• Ampere Frame Error : Occurs when the value of rating plug is not within 45%~100% of AF
• 63rd harmonic current • 63rd harmonic current • 63rd harmonic current • 63rd harmonic current • MTD Fail : Occurs when STU is not assembled with MTD or trip coil disconnection occurs
• Current THD, TDD, K - • Current THD, TDD, K - • Voltage THD • Voltage THD • Factory Cfg Error : Occurs when the factory mode setting is entered incorrectly
PQ function Self-
Factor Factor • Current THD, TDD, K - • Current THD, TDD, K - • Device Type Erro r: Occurs when the rating plug information and CT information are different
diagnosis • Over Heat Error : Occurs when CPU internal temperature N/A type exceeds 100 degrees and P/S type exceeds
Factor Factor
115 degrees
• Max Current demand • Max Current demand • Max Current demand • Max Current demand
• Contact Wear Alarm : Occurs when CPU internal temperature N/A type exceeds 100 degrees and P/S type
• Max Io • Max Io • Max active/reactive/apparent • Max active/reactive/apparent List
exceeds 115 degrees
• Max In • Max Ext Io power power
• Electrical Open Count Over Alarm : Occurs when the electrical open count exceeds 80% of the allowable
• Max internal temperature • Max In • Demand • Demand
electrical open count
Measurement • Max internal temperature • Max active power • Max active power
• Mechanical Open Count Over Alarm : Occurs when the mechanical open count exceeds 80% of the allowable
record • Max Vo • Max Vo
mechanical open count
• Max Io • Max Io
• RTC Erro r: Occurs when an error occurs in the internal RTC information
• Max Ext Io • Max Ext Io
• Memory Error : Occurs when corruption occurs in the redundant internal settings stored in the internal non-
• Max In • Max In
volatile memory
• Max internal temperature • Max internal temperature
• CT disconnection error : Occurs when CT disconnection occurs (monitoring by each phase)
• Can be checked by • Can be checked by • Can be checked by
Real - time communication communication communication
waveform • Can be checked on the LCD • Can be checked on the LCD
screen screen

34 35
 Smart LV Solution
Smart Trip Unit Smart ACB

Control circuit diagram

This diagram is based on“ ”

TRIP COIL SUPERVISION(OPTION)
Comm. ground

Common
ZSI Output
Temperature

ZSI Input
Power supply
Module

Reset

OFF

OFF
ZCT

ON
CG FG E1 Z3 Z1 485+ R11 R22 513 R2 R1 251 83 D1 C11 C1 A1 U1 413 423 61 51 41 31 21 21 53 43 33 23 13 T1 TC1 T2 TC2 341 331 321 311 381 371 361 351
GD 183
/EM(+) /RES(+)

CL2 (CONNECTED)

CL1 (CONNECTED)

CL6 (CONNECTED)

CL5 (CONNECTED)
CL4 (DISCON) or

CL8 (DISCON)
CL4 (TEST)

CL3 (TEST)

CL7 (TEST)
Temperature Temperature
Sensor-1 Sensor-2

Axa

Axb

Axb
ACB

Axb

Axb

Axb

Axb

Axb

Axa

Axa

Axa

Axa

Axa
Trip relay UVT SHT2 SHT1 CC

or

N
C
B
Voltage M
A Module

GD
/EM(-) E2 Z4 Z2 485- 544 534 524 252 84 184
/RES(-) D2 C12 C2 A2 U2 414 424 52 42 32 22 12 54 44 34 24 14 342 344 332 334 322 324 312 314 382 384 372 374 362 364 352 354

OFF

ON
Charged

Charged
STD/Inst

LTD
GTD

Fault trip Electrical Charge

Main circuit Digital trip relay completion Auxiliary switch Thermal, Cell switch 4C Cell switch 8C (4C Addition)
(AL Contact) operation circuit communication
contact
remote control module
UVT

Secondary SBC
Ready to close (Shorting b-contact)
trip coil Cell switch 8C

Terminal code description Accessory code description

13 14 ~ 63 64 Auxiliary switch "NO" D1 D2 Voltage input terminal of UVT Z1 Z2 ZSI input Axa , Axb Auxiliary switch
Internal / External wiring (by customer)
11 12 ~ 61 62 Auxiliary switch "NC" 83 84 Alarm1 "NO" Z3 Z4 ZSI output LTD Long time delay trip indicator
413 414 Charged signal 183 184 Alarm2 "NO" E1 E2 ZCT STD/Inst Short time delay/instantaneous
Connector of the control circuit terminal of drawout type
423 424 Charged signal communication 251 252 Ready to close switch GD
/EM(+)
GD
/EM(-)
Group DI or ERMS DI GTD Ground fault trip indicator

U1 U2 Motor charging R1 R2 Control Power FG Frame ground CL1~CL4 Cell switch

A1 A2 Closing coil 513 ~ 544 Alarm contact CG Communication Ground M Motor

C1 C2 Shunt trip R11 R22 Alarm reset (Trip cause LED, Alarm contact) TC1 TC2 ~ T1 T2 Temperature module CC Closing coil
C11 C12 2nd shunt trip 485+ 485- RS-485 communication 311 ~ 344 Position switch SHT1 Shunt tripping device 1
EARTHING
911 ~ 914 TRUCK SHT2 Shunt tripping device 2
UVT UVT coil

Note) 1. The diagram is shown with circuit de-energized, all devices open, connected and charged and
relays in normal position
2. Relay is normal condition and charging type is "OFF-Charging"
3. The standard of auxiliary contact is 3a3b. The auxiliary switch in above diagram is composed of 5a5b.
See 48 page for more detail on auxiliary switches.
4. Option
- Ready to close contact, Trip alarm contact, UVT coil, Fully charged contact, secondary trip coil
- Cell switch, Temperature module, Voltage module, Remote close-open module, ZCT, ZSI
5. Please consult us for the use of ZSI (Zone selective Interlocking).
6. Refer to the page 33 for the connection of Trip relay and the page 43 for UVT.
7. For connecting RS-485 verify if the polarity is correct
8. Contact configuration for Cell Switch can be changeable if necessary

36 37
 Smart LV Solution
Smart Trip Unit Smart ACB

System diagram

BLOCK DIAGRAM OF TRIP RELAY BLOCK DIAGRAM OF TRIP RELAY BLOCK DIAGRAM OF TRIP RELAY BLOCK DIAGRAM OF TRIP RELAY
(ACB 4P) (ACB 4P) (ACB 3P) (ACB 3P)

A B C N A B C N A B C A B C

ACB ACB ACB TRIP ACB TRIP ACB ACB ACB TRIP ACB TRIP
(4P) (4P) (3P) (3P)
Vcc/+5V Vcc +5V +24VVcc/+5V Vcc +5V +24V

CN2-1
CPU Display CN2-1 CPU Display CN2-1 CN2-1
Filter Filter
LED LCD LED LCD
Amplifier Amplifier
CN2-10 CN2-10
CN2-3 CN2-3 CN2-3 CN2-3

Main PCB MTD Main PCB MTD

SIGNAL SIGNAL CN2-5 Main PCB
Ass'y
Ass'y CN2-5
CN2-12 Output Main PCB
Ass'y
Ass'y
SIGNAL
CN2-12 Output SIGNAL CN2-5 CN2-5

CT CT Main PCB
Ass'y
Main PCB
Ass'y CT CT
CN2-7 CN2-7 CN2-7 CN2-7
Setting Setting
CN2-14 Part CN2-14 Part CN2-14 CN2-14

GND 24V GND 24V

CN2-4 CN2-4 CN2-4 CN2-4
Vcc Vcc
Self powe r Self powe r
+24V +24V
RY0 (K1) CN9-2 RY0 (K1) CN9-2
POWER POWER GND
LTD contact
GND POWERLTD contact POWER
CT CT +5 V RY1 (K2) +5 V RY1 (K2)
CT CT
Main PCB CN9-4Main PCB CN9-4
Ass'y STD/INST contact
Ass'y STD/INST contact

CN2-2 RY2 (K3) CN2-2 RY2 (K3) CN2-2 CN2-2

CN9-6 CN9-6
GTD contact GTD contact

J1-1 J1-1 J1-1 J1-1

Power PCB CN9-8 Power PCB CN9-8
J1-2 J1-2 Common contact Common contact J1-2 J1-2
Voltage Voltage VDM VDM Voltage Voltage
Ass'y Ass'y
J1-3 Module J1-3 Module J1-3 J1-3
Input Input J1-4 J1-4
Input Input J1-4 J1-4
FG FG
CN5-1 CN5-1
ZSI output+ ZSI output+
CN9-9 CN5-2
CN9-9 CN5-2 CN9-9 CN9-9
External Source External Source ZSI output- ZSI output- External Source External Source
AC/DC 110~220V SMPS AC/DC 110~220V SMPS AC/DC 110~220V AC/DC 110~220V
CN9-10 CN5-3
CN9-10 CN5-3 CN9-10 CN9-10
DC 24~48V Power PCB DC 24~48V ZSI PCB
Power input+ ZSI input+ DC 24~48V DC 24~48V
CN9-7 Ass'y CN9-7
CN5-4 Ass'y CN5-4 CN9-7 CN9-7
FG FG ZSI input- ZSI input- FG FG

CN5-7 CN5-7 CN5-7 CN5-7

CN5-5 CN5-5
CN5-8 CN5-8 Remote reset + Remote reset + CN5-8 CN5-8
CN5-6 CN5-6

ZCT ZCT ZCT ZCT

Remote reset - Remote reset -

(Earth leakage) (Earth leakage) CN5-9

Group DI or ERMS DI +
(Earth
CN5-9 leakage)
Group DI or ERMS DI +
(Earth leakage)
CN4-2 CN4-2 CN4-2 CN4-2
Current Signal(A) Current Signal(A) CN5-10 CN5-10 Current Signal(A) Current Signal(A)
CN4-4 CN4-4 Group DI or ERMS DI - Group DI or ERMS DI - CN4-4 CN4-4
Current Signal(B) Test Current Signal(B) Test Current Signal(B) Current Signal(B)
CN4-6 CN4-6 CN4-6 CN4-6
Current Signal(C) Port Current Signal(C) Port Current Signal(C) Current Signal(C)
CN4-8 CN4-8 CN4-8 CN4-8
Current Signal(N) Current Signal(N) Current Signal(N) Current Signal(N)
i-Tester i-Tester i-Tester i-Tester
CN4-5 CN9-1
CN4-5 CN9-1 CN4-5 CN4-5
Comm.CN4-1 Comm.
DC 24V DC 24V RS485+ RS485+ DC 24V DC 24V
CN4-1 CN4-1 CN4-1
TTL TX Main PCB TTL TX CN9-3 Main PCB CN9-3 TTL TX TTL TX
CN4-3 CN4-3 RS485- RS485- CN4-3 CN4-3
TTL RX Ass'y TTL RX PCB Ass'y Ass'y PCB Ass'y TTL RX TTL RX
CN4-9 CN9-5
CN4-9 CN9-5 CN4-9 CN4-9
GND GND Comm. GND Comm. GND GND GND
AD GND CN4-10 AD GND CN4-10 AD GND CN4-10 AD GND CN4-10

주) 1. 적색 표시부는 Option 주문 및 1. 적색 표시부는

Note: 1. The red display part is for the option order and the user must wire directly.
주)사용자가 직접 배선해야 Option 되는 주문
부분임.
및 사용자가 직접 배선해야 되는 부분임.
2. 청색 표시부는 Trip relay 주문시2. Trip relay 주문시 필요사양에 맞추어 주문해야됨.
2. The blue display part must be ordered according to the required specifications when ordering a trip relay.
필요사양에
청색 표시부는 맞추어 주문해야됨.

38 39
 Smart LV Solution

Smart Molded Case Circuit Breakers

Susol Smart MCCB is developed by combining digital technology with LS ELECTRIC's power device technology
accumulated over 40 years. The relay and measurement functions for line protection has been upgraded.
By using accessory devices for connectivity between low-voltage devices,
it is possible to diagnose and maintain devices by collecting and analyzing data.

Susol Smart MCCB

1. Overview
• Susol MCCB Overview ........................................................... 42

2. Features
• Susol MCCB features ............................................................ 44

3. Model selecting guide

• Susol MCCB model numbering (Product selection) ................... 48

4. External structure and notation ............................................ 50

5. Rated specifications ............................................................ 52

6. Smart Trip Unit .................................................................... 56

 Smart LV Solution
Susol MCCB Overview Susol Smart MCCB

Super performance
The third breaking performance guarantees
the original performance.

Ics=100% Icu : 50, 65, 85, 100, 150kA at 415Vac 5 Frames

TS1600
TS800 Rated current : 1000, 1250, 1600A
Icu : 50kA (N), 70kA (H), 150kA (L)
Ics = Icu
TS400/630 Rated current : 700, 800A
210 (W) × 327 (H) × 152.5mm (D)
Icu : 65kA (N/Ni), 100kA (H/Hi), 150kA (L/Li)
Rated current : 300~630A Ics = Icu
TS100/160/250 Icu : 65kA (N/Ni), 85kA (H/Hi), 150kA (L/Li) 210 (W) × 320 (H) × 135mm (D)
Ics = Icu
Rated current : 40~250A 140 (W) × 260 (H) × 110mm (D)
150kA TS1600L TS1600H TS1600N
(AF)
TD100/160 Icu : 50kA (N/Ni), 85kA (H/Hi),
150kA (L/Li)
100kA TS1250H TS1250N

Rated current : 16~160A

85kA TS1000H TS1000N
70kA
Ics = Icu
Icu : 50kA (N), 85kA (H), 150kA (L) 105 (W) × 160 (H) × 86mm (D)
65kA TS800L/Li TS800H/Hi TS800N/Ni
Ics = Icu
50kA

TS630L/Li 90 (W) × 140 (H) × 86mm (D)

TS630H/Hi TS630N/Ni

TS400L/Li TS400H/Hi TS400N/Ni

TS250L/Li TS250H/Hi TS250N/Ni

1600A
800A
TS160L/Li TS160H/Hi TS160N/Ni 630A )
TD160L (A
TD160H TD160N 400A , In
e nt
r
TS100L/Li 250A ur
TS100H/Hi TS100N/Ni dc
TD100L 160A te
TD100H TD100N Ra
100A
Breaking capacity, Icu(kA)

42 43
 Smart LV Solution
Susol MCCB features Susol Smart MCCB

Optimal Solution-Trip unit

TD Seris TS Series

Smart MCCB Type

Rated current 16 ~ 160A 40 ~ 800A 40 ~ 800A 800 ~1600A

FMU
Thermal electronic FMU
FTU - DSU
type FTU
ATU

Magnetic only - MTU Note 1) - -

Trip ETSi
ETS ETMi
unit Electronic
- ETM Note 2) -
release ETHi
ETLi

Switch DSU DSU - DSU

N type A type
OCR - - -
P type S type

Note 1) 1.6~630A Note 2) 64~800A

100~800AF
For line and device protection
1. Thermal magnetic trip units 2. Electronic trip units
- FTU : Fixed thermal, fixed magnetic trip unit - ETS/ ETSi : Standard
- FMU : Adjustable thermal, fixed magnetic trip unit - ETM/ ETMi : Multi-Function
- ATU : Adjustable thermal, adjustable magnetic trip unit - ETHi : High-Performance
- ETLi : Limited-Performance
Susol circuit breaker's Brain-Trip unit
The trip unit has the core function of monitoring the system and sending an interruption (trip) signal when an error
occurs. The Susol circuit breaker have optional adjustable devices for each item as well as simple fixed trip devices. For motor protection For switch disconnector
It provides the optimal solution for selection according to the type of load and operation coordination between upper
MTU : Magnetic only trip unit DSU : Disconnecting switch unit
and lower circuit breakers.
MTU DSU
1848

1584
2112

2376
220A
1320 2640
3P 3P
Thermal magnetic
release

Thermal magnetic
1000~1600AF trip relay (OCR)
release
N type A type P type S type

Magnetic only

Electronic
release

OCR

Regular type Ammeter type Power meter type High performance

meter type
44 45
 Smart LV Solution
Susol MCCB features Susol Smart MCCB

Susol Smart MCCB Susol MCCB and Susol Smart MCCB device specifications
Susol Smart MCCB was developed by integrating digital technology based on ‧Breaking capacity and exterior size
Common
power device technology accumulated over 40 years. ‧Insulation voltage upgrade : 750V → 1000V
specifications
Relay and measurement functions for line protection have been upgraded, ‧Compatible with existing accessories
and by using accessory devices for connectivity between low - voltage devices,
data can be collected and analyzed to diagnose and maintain devices.
LS ELECTRIC takes the lead for a smart future with energy digitalization. Susol Smart MCCB ‧Fine relay function that can be finely adjusted : LSIG (Long time protection against overload, Short circuit protection,
Instantaneous protection, Earth fault protection)
features
‧Upgraded measurement accuracy : Current Class 1, Voltage ± 0.5%, Power and Power Class 2
‧Device diagnosis and maintenance
‧Dark gray exterior color with new PI

630AF 800AF 250AF 630AF 800AF

[Susol MCCB - ETM] [Susol Smart MCCB - ETLi]

Susol Circuit Breaker + Digital Technology Susol Smart MCCB

Electronic trip Susol MCCB Susol Smart MCCB

Type
device specification ETS ETM ETSi ETMi ETHi ETLi
comparison Frame size 250/ 630/ 800AF 630/ 800AF 250/ 630/ 800AF

Long time, short circuit, ■ ■ ■ ■ ■ ■

Line protection instantaneous

Ground fault Option ■ ■ ■ ■

Applicable field
Current - ■ ■ ■ ■ ■
Measurement
The movement for energy digitalization is taking place in various fields. Voltage, frequency, power factor,
information - - - - ■ ■
Susol Smart MCB can be applied to areas such as renewable energy, buildings, industry, and EV charging infrastructure power quantity, power quality, etc.
linked to low pressure, in order to safely protect the line with LSIG relay function.
System event, fault event
- One - ■ ■ ■
(Up to 50)
Device Operating time, mechanical
operation frequency, electrical frequency, trip - - - ■ ■ ■
frequency, load usage rate
Contact wear rate - - - - ■ ■

RS485 - ■ - ■ ■ ■
Communication
Mobile communication - - - - - ■
Renewable energy Infrastructure Residential/ Industrial EV charging
generation Commercial infrastructure • ETS/ ETSi : Standard • ETM/ ETMi : Multi - Function • ETHi : High - Performance • ETLi : Limited - Performance

46 47
 Smart LV Solution
Model selecting guide Susol Smart MCCB

Smart MCCB (Trip unit : ETSi, ETMi, ETHi, ETLi)

Model numbering (Product selection)
New standard for low voltage circuit breakers
TS 250 Ni ETHi 630A 3P - AX

Basic format/
Ampere frame
Type Rated
current Number of poles
-
Plug-in
Standard
-

AX
Standard

Accessories
Smart MCCB
100 Ni Normal 3P 3-pole
P Plug-in Susol Smart MCCB is developed by combining digital technology with
160 Hi High 4-pole N-A-B-C
4P L LS ELECTRIC's power device technology accumulated over 40 years.
(N-R-S-T)
250
TS Li Limited 4-pole A-B-C-N The relay and measurement functions for line protection has been upgraded.
4P R
400 (R-S-T-N)
By using accessory devices for connectivity between low-voltage devices,
630
it is possible to diagnose and maintain devices by collecting and analyzing data.
800 Trip Unit (ETU)
ETSi Standard

ETMi Multi-Function

ETHi High-performance

ETLi Limited-performance

ETSi, ETMi, ETHi, ETLi

48 49