Proximity Products
Transducer Specifications
Specifications - Proximity Probe & Extension Cable
PROXIMITY PRODUCTS
Mechanical Connector to Connector Torque: Hex Probe Pressure : Standard probe de-
connector to hex connector- finger tight sign includes seal between probe tip and
Probe Tip Material: Ryton and 1/8 turn with wrenches. Hex case and is not pressure tested before
connector to “click type” connector- finger shipment. If pressures are present, con-
Probe Case Material: Series 300 tight plus 1/8 turn with wrench & pliers tact the factory for details and possible
stainless steel for forward mount, high pressure probe designs.
smooth case and reverse mount Tensile Strength: 50 lbf probe case to
probes probe lead. 50 lbf. probe pigtail to Relative Humidity: 100% condensing
connector and 50 lbf. connectors to but not submersible and with connectors
Probe Cable Specifications: Coaxial extenstion cable. properly protected.
cable with Tefzel insulation for
maximum abrasion resistance with Probe / Cable Armor: Series 300 Agency approvals are standard
patented ProxMatchTM color & alpha- stainless steel, flexible, connected to probe
numeric coding specific to a series and body with case internal thread.
system length.
Minimum Bend Radius: 1 inch without
Cable Impedance: armor
10000 & 7200 series: 95 ohm
3300 XL, 3300, 3309 NSv, & RAM: 75 Standard Target Material: 4140 steel
ohm 3000 series: 50 ohm
Environmental limits
Cable Sealing: Optional CableSealTM
proprietary vacuum drawn sealing Probe Temperature Range:
process. -40°C to +177°C (-40°F to +351°F)
Connector Material: Gold plated Extension Cable Temperature Range:
brass hex connectors -40°C to +177°C (-40°F to +351°F)
Proximity Extension Cables
1) Pick an Extension Cable from SAME SERIES as probe and electronics
2) Given the probe length, pick a cable length so the sum of probe and cable add up to the system length
3) Decide with or without armor
OPTIONAL STAINLESS
Weight & Dimensions STEEL ARMOR
CABLE IMPEDANCE
300 (12) (SEE TABLE)
TYPICAL MAX. DIA. 8.2 (.325)
Weights: 7.1 (.28)
0.5 kg [1 lb] for 5 m, unarmored
0.7 kg [1.5 lbs] for 5 m, armored
0.7 kg [1.5 lbs] for 9 m, unarmored COAXIAL CONNECTOR COAXIAL CONNECTOR
1.0 kg [2.2 lbs] for 9 m, armored (FEMALE) (MALE)
CABLE
Dimensions in mm [inches] LENGTH
Model No. -
Probe System
Series Model No. Cable Length Armor Approvals Length Length
10000 7402 040 = 4.0 m 00 = NO Approvals 1.0 m 5m
7200 7402 045 = 4.5 m 01 = YES are Standard 0.5 m 5m
3300
080 = 8.0 m + 1.0 m = 9m
MX330130 085 = 8.5 m See 00 = NO 0.5 m 9m
3300XL
1.0 m 7m
3309 NSv 060 = 6.0 m* Page 1.08 05 = YES 0.5 m 7m
MX330930
RAM 065 = 6.5 m*
7386-01/2789 see table for 3000 NO
3000 Approvals
cable lengths (in
7386-01/4454 YES are Standard
inches)
* 6.0 & 6.5 meter extension cales used for 7 meter system length for 3309 NSV & RAM Series only.
1.16 www.metrix1.com • [email protected] • Sales & Service Tel: 281-940-1802 • Fax: 713-559-9421 • 03/10
Proximity Products
Transducer Specifications
Proximity Probes All Series
PROXIMITY PRODUCTS
PROXIMITY PROBES: SELECT a probe to suit the mechanical requirements of the machine and mates with
the same series extension cable and driver, or transmitter.
STAINLESS STEEL JAM NUT
4 WRENCH CABLE IMPEDANCE
FLATS SEE TABLE
TIP DIA. 7.1 (.28)
Weight: UNTHREADED COAXIAL CONNECTOR
0.4 kg [0.8 lb], unarmored LENGTH
0.5 kg [1 lb], armored
CASE LENGTH
Dimensions in mm [inches]
PROBE LENGTH
ARMORCONNTM
4 WRENCH CABLE IMPEDANCE
STAINLESS ARMOR CONNECTION
JAM NUT FLATS SEE TABLE
STEEL TO PROBE CASE
TIP DIA. 7.1 (.28)
COAXIAL CONNECTOR
UNTHREADED
LENGTH
Weight:
0.4 kg [0.8 lb], unarmored CASE LENGTH 0.25 IN. FOR ARMOR “COLLAR”
0.5 kg [1 lb], armored
Dimensions in mm [inches] PROBE LENGTH
15 STAINLESS
STEEL CABLE IMPEDANCE
(.60) 11.1 HEX
SEE TABLE REQUIRED Mounting
Accessory for Reverse
TIP DIA. 7.1 (2.8) Mount -
Model 5499-XXX
COAXIAL CONNECTOR (pg 1.29)
UNTHREADED CASE
LENGTH LENGTH
PROBE
LENGTH
Weight: 0.5 kg [1lb]
Dimensions in mm [inches]
Model No.
(See page) 02
Unthreaded Length Case Length Probe
Series Pg. Tip Diam. Connector Approvals
No. English units Metric units English units Metric units Length
10000 1.04 5 mm & 8mm
Standard:
7200 1.06 5 mm & 8mm Increments
Standard: 00 = 0.0 in. 00 = 0 mm. 30 = 3.0 in. 07 = 70 mm. 05 = 0.5 m 00 = None standard
7200 1.14 11 mm only Increments of: 05 = 0.5 in. 01 =10 mm. of: 05 = 0.5 in. 02 = 20 mm. ± .05 m 02 = Yes (no designation)
3300 1.08 5 mm & 8mm Maximum: Case Length Case Length Minimum: 10 = 1.0 in. 25 = 250 mm. 10 = 1.0 m
3300XL 1.08 8 mm only minus 1.0 in. minus 20 mm. Maximum: 95 = 9.5 in. ± .1 m See page 00 = none
3309NSv 1.10 5 mm only 1.08 05 = Yes
RAM 1.10 5 mm only
Standard: 00 = 0.0 in. Standard: 30 = 3.0 in. 06 = 6 inches to 00 = none standard
3000 1.12 0.190 in. Increments of: 05 = 0.5 in. English Increments of: 05 = 0.5 in. English (no designation)
units only Minimum: = 1.0 in. units only 36 = 36 inches in 02 = Yes
0.300 in. Maximum: Case Length 10 6 inch increments
minus 1.0 in. Maximum: 95 = 9.5 in.
www.metrix1.com • [email protected] • Sales & Service Tel: 281-940-1802 • Fax: 713-559-9421 • 03/10 1.17
