SCHOOL OF CIVIL ENGINEERING

B. Tech. Civil Engineering

(B. Tech. BCL)

Curriculum
(2020-2021 admitted students)
VISION STATEMENT OF VELLORE INSTITUTE OF TECHNOLOGY

Transforming life through excellence in education and research.

MISSION STATEMENT OF VELLORE INSTITUTE OF TECHNOLOGY

World class Education : Excellence in education, grounded in ethics and critical

thinking, for improvement of life.
Cutting edge Research : An innovation ecosystem to extend knowledge and
Solve critical problems.
Impactful People : Happy, accountable, caring and effective workforce
and students.
Rewarding Co-creations : Active collaboration with national & international
industries & universities for productivity and economic
development.
Service to Society : Service to the region and world through knowledge and
compassion.

VISION STATEMENT OF THE SCHOOL OF CIVIL ENGINEERING

• To be internationally recognized for ground-breaking contributions,

exceptional leadership, strong commitment to creative problem-solving and
professional integrity.

MISSION STATEMENT OF THE SCHOOL OF CIVIL ENGINEERING

• The School of Civil Engineering inspires and nurtures innovative leaders.

• Preparedness to address the complex societal-scale challenges in areas of
resilient infrastructure, smart and sustainable cities, water and energy
security, climate change, mobility of goods and people, and environmental
protection.
• Pioneering the emerging skills in Civil Engineering.

B.TECH. (BCL) Page 2

 B. Tech. Civil Engineering

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

1. Graduates will be engineering practitioners and leaders, who would help

solve industry's technological problems.

2. Graduates will be engineering professionals, innovators or entrepreneurs

engaged in technology development, technology deployment, or engineering
system implementation in industry.

3. Graduates will function in their profession with social awareness and

responsibility.

4. Graduates will interact with their peers in other disciplines in industry and
society and contribute to the economic growth of the country.

5. Graduates will be successful in pursuing higher studies in engineering or

management.

6. Graduates will pursue career paths in teaching or research.

B.TECH. (BCL) Page 3

 B. Tech. Civil Engineering
PROGRAMME OUTCOMES (POs)

PO_01: Having an ability to apply mathematics and science in engineering

applications.
PO_02: Having a clear understanding of the subject related concepts and of
contemporary issues and apply them to identify, formulate and analyse
complex engineering problems.
PO_03: Having an ability to design a component or a product applying all the
relevant standards and with realistic constraints, including public
health, safety, culture, society and environment
PO_04: Having an ability to design and conduct experiments, as well as to
analyse and interpret data, and synthesis of information
PO_05: Having an ability to use techniques, skills, resources and modern
engineering and IT tools necessary for engineering practice
PO_06: Having problem solving ability- to assess social issues (societal, health,
safety, legal and cultural) and engineering problems
PO_07: Having adaptive thinking and adaptability in relation to environmental
context and sustainable development
PO_08: Having a clear understanding of professional and ethical responsibility
PO_09: Having cross cultural competency exhibited by working as a member
Or in teams
PO_10: Having a good working knowledge of communicating in English –
communication with engineering community and society
PO_11: Having a good cognitive load management skills related to project
management and finance
PO_12: Having interest and recognise the need for independent and lifelong
learning

B.TECH. (BCL) Page 4

 B. Tech. Civil Engineering
PROGRAMME SPECIFIC OUTCOMES (PSOs)
On completion of B. Tech. (Civil Engineering) programme, graduates
will be able to

PSO_01: Develop and apply innovative, state-of-the-art practices and

technologies and Provide sustainable solutions to the Civil
Engineering Problems

PSO_02: Plan, design, construct and operate society economic and

social engine that built the environment and also protecting,
restoring the natural environment

PSO_03: Apply modern techniques, advanced materials, equipment

and management tools so as to complete the civil
engineering project within specified time and funds.

B.TECH. (BCL) Page 5

 B. Tech. Civil Engineering

CREDIT STRUCTURE

Category-wise Credit distribution

Category Credits
University core (UC) 53
Programme core (PC) 61
Programme elective (PE) 34
University elective (UE) 12
Total credits 160

B.TECH. (BCL) Page 6

 B. Tech. Civil Engineering

DETAILED CURRICULUM
University Core
Course
Course Title L T P J C Remarks
Code
CHY1701 Engineering Chemistry 3 0 2 0 4
CSE1001 Problem Solving and Programming 0 0 6 0 3
Problem Solving and Object Oriented
CSE1002 0 0 6 0 3
Programming
ENG1901/ Technical English I 0 0 4 0
ENG1902/ Technical English II 0 0 4 0 2
ENG1903 Advanced Technical English 0 0 2 4
HUM1021 Ethics and Values 2 0 0 0 2
MAT1011 Calculus for Engineers 3 0 2 0 4
MAT2001 Statistics for Engineers 3 0 2 0 4
Technical Answers for Real World
CLE1901 1 0 0 4 2
Problems (TARP)
CLE1902 Industrial Internship 0 0 0 0 1
CLE1903 Comprehensive Examination 0 0 0 0 1
CLE1904 Capstone Project 0 0 0 0 12
MGT1022 Lean Start-up Management 1 0 0 4 2
PHY1701 Engineering Physics 3 0 2 0 4
PHY1901 Introduction to Innovative Projects 1 0 0 0 1
FLC4097 Foreign Language Courses Basket 2 0 0 0 2
STS4097 Soft Skills - - - - 6

Non Credit
CHY1002 Environmental Sciences 3 0 0 0 3
Course

ENG1000/ Foundation English I Non Credit

0 0 4 0 2
ENG 2000 Foundation English II Course

B.TECH. (BCL) Page 7

 Course
Course Title L T P J C Remarks
Code
Non Credit
EXC4097 Extra & Co- Curricular Activities 0 0 0 0 2
Course
Total Credits (A) 60
Non Credit Course (B) 7
University Core Courses (A-B) 53

B. Tech. Civil Engineering

Programme Core

S. No. Course Code Course Title L T P J C

1. CLE1003 Surveying 3 0 2 4 5
2. Soil Mechanics and Foundation
CLE1004 3 0 2 0 4
Engineering
3. CLE1006 Environmental Engineering 2 0 2 4 4
4. Construction Materials and
CLE1007 3 0 0 0 3
Techniques
5. CLE2001 Building Drawing 1 0 2 4 3
6. CLE2002 Strength of Materials 2 2 2 0 4
7. CLE2003 Structural Analysis 2 2 0 0 3
8. CLE2004 Water Resource Engineering 2 0 2 4 4
9. CLE2005 Transportation Engineering 2 0 0 4 3
10. CLE3001 Quantity Surveying and Estimating 2 0 0 0 2
11. CLE3002 Basics of Structural Design 2 2 2 0 4
12. Applications of Differential and
MAT2002 3 0 2 0 4
Difference Equations
13. Complex variables and Partial
MAT3003 3 2 0 0 4
Differential Equations
14. MAT3005 Applied Numerical Methods 3 2 0 0 4
15. MEE1001 Engineering Drawing 1 0 4 0 3
16. MEE1002 Engineering Mechanics 2 2 0 0 3
17. MEE1004 Fluid Mechanics 2 2 2 0 4

B.TECH. (BCL) Page 8

 B. Tech. Civil Engineering
Programme Elective
Sl. Course
Course Title L T P J C
No. Code
1. CLE1010 Natural Disaster Mitigation and Management 3 0 0 0 3
2. CLE1011 Engineering Geology 2 0 0 4 3
3. CLE1013 Environmental Impact Assessment 3 0 0 0 3
4. CLE1016 Urban Planning 3 0 0 0 3
5. CLE2007 Advanced Concrete Technology 3 0 2 4 5
6. CLE2008 Construction Planning and Management 3 0 0 0 3
7. CLE2009 Advanced Soil Mechanics 2 2 0 0 3
8. CLE2010 Ground Improvement Techniques 2 0 0 4 3
9. CLE2011 Soil Dynamics and Machine Foundation 2 2 0 0 3
10. CLE2013 Advanced Foundation Engineering 2 2 0 0 3
11. CLE2014 Geotechnical Earthquake Engineering 2 0 0 4 3
12. CLE2015 Hydraulic Structures and Machinery 2 2 2 0 4
13. CLE2017 Hydrology 3 0 0 0 3
14. CLE2018 Industrial Wastes Treatment and Disposal 2 0 0 4 3
15. CLE2019 Pollution Control and Monitoring 2 0 0 4 3
16. CLE2020 Solid Waste Management 2 0 0 4 3
17. Economics and Business Finance for Civil
CLE2022 3 0 0 0 3
Engineers
18. CLE2023 GIS and Remote Sensing 2 0 2 0 3
19. CLE3004 Advanced Structural Analysis 2 2 2 0 4
20. CLE3005 Ground Water Engineering 3 0 0 0 3
21. CLE3007 Traffic Engineering 2 0 0 4 3
22. CLE3008 Transport Planning and Management 2 0 0 4 3
23. CLE3010 Architecture and Town Planning 2 0 0 4 3
24. CLE3011 Finite Element Methods 2 2 0 0 3
25. CLE4001 Design of Steel Structures 3 0 2 0 4

B.TECH. (BCL) Page 9

 Sl. Course
Course Title L T P J C
No. Code
26. CLE4002 Design of Advanced Concrete Structures 2 0 0 4 3
27. CLE4003 Prestressed Concrete Design 3 0 0 0 3
28. CLE4004 Seismic Design of Structures 2 2 0 0 3
29. MEE1024 Operations Research 2 2 0 0 3

University Elective Baskets

Management courses
Sl.
Code Title L T P J C
No.
1. MGT1001 Basic Accounting 3 0 0 0 3
2. MGT1002 Principles of Management 2 0 0 4 3
3. MGT1003 Economics for Engineers 2 0 0 4 3
4. MGT1004 Resource Management 2 0 0 4 3
5. MGT1005 Design, Systems and Society 2 0 0 4 3
6. MGT1006 Environmental and Sustainability Assessment 2 0 0 4 3
7. MGT1007 Gender, Culture and Technology 2 0 0 4 3
8. MGT1008 Impact of Information Systems on Society 2 0 0 4 3
9. MGT1009 Technological Change and Entrepreneurship 2 0 0 4 3
10. MGT1010 Total Quality Management 2 2 0 0 3
11. MGT1014 Supply Chain Management 3 0 0 0 3
12. MGT1015 Business Mathematics 3 0 0 0 3
13. MGT1016 Intellectual Property Rights 3 0 0 0 3
Business Regulatory Framework For Start-
14. MGT1017 3 0 0 0 3
ups
15. MGT1018 Consumer Behaviour 3 0 0 0 3
16. MGT1019 Services Marketing 3 0 0 0 3
17. MGT1020 Marketing Analytics 2 0 2 0 3
18. MGT1021 Digital and Social Media Marketing 3 0 0 0 3
19. MGT1022 Lean Start-up Management 1 0 0 4 2

B.TECH. (BCL) Page 10

 Sl.
Code Title L T P J C
No.
Fundamentals of Human Resource
20. MGT1023 3 0 0 4 4
Management
21. MGT1024 Organizational Behaviour 3 0 0 4 4
Foundations of Management And
22. MGT1025 3 0 0 4 4
Organizational Behaviour
23. MGT1026 Information Assurance and Auditing 2 0 0 4 3
24. MGT1028 Accounting and Financial Management 2 2 0 4 4
25. MGT1029 Financial Management 2 1 0 4 4
26. MGT1030 Entrepreneurship Development 3 0 0 4 4
27. MGT1031 International Business 3 0 0 4 4
28. MGT1032 Managing Asian Business 3 0 0 4 4
29. MGT1033 Research Methods in Management 2 1 0 4 4
30. MGT1034 Project Management 3 0 0 4 4
31. MGT1035 Operations Management 3 0 0 0 3
32. MGT1036 Principles of Marketing 3 0 0 4 4
33. MGT1037 Financial Accounting and Analysis 2 1 0 4 4
34. MGT1038 Financial Econometrics 2 0 0 4 3
35. MGT1039 Financial Markets and Institutions 2 0 0 4 3
36. MGT1040 Personal Financial Planning 2 0 0 4 3
37. MGT1041 Financial Derivatives 2 1 0 4 4
Investment Analysis and Portfolio
38. MGT1042 2 0 0 4 3
Management
39. MGT1043 Applications in Neuro Marketing 3 0 0 4 4
40. MGT1044 Global Brand Marketing Strategies 3 0 0 4 4
41. MGT1045 Industrial Marketing 3 0 0 4 4
42. MGT1046 Sales and Distribution Management 3 0 0 4 4
43. MGT1047 Social Marketing 3 0 0 4 4
44. MGT1048 Political Economy of Globalization 3 0 0 4 4
45. MGT1049 Sustainable Business Models 3 0 0 4 4
46. MGT1050 Software Engineering Management 2 0 0 4 3

B.TECH. (BCL) Page 11

 Sl.
Code Title L T P J C
No.
47. MGT1051 Business Analytics for Engineers 2 2 0 0 3
48. MGT1052 Bottom of the Pyramid Operations 3 0 0 0 3
Entrepreneurship Development, Business
49. MGT1053 1 0 2 0 2
Communication and IPR
50. MGT1054 Product Planning and Strategy 2 2 0 0 3
51. MGT1055 Design Management 2 2 0 0 3
52. MGT1056 Accounting and Financial Management 3 0 0 4 4
53. MGT6001 Organizational Behaviour 2 0 0 4 3

Humanities courses

Sl.
Code Title L T P J C
No.
1. HUM1001 Fundamentals of Cyber Laws 3 0 0 0 3
2. HUM1002 Business Laws 3 0 0 0 3
3. HUM1003 Basic Taxation for Engineers 3 0 0 0 3
4. HUM1004 Corporate Law for Engineers 3 0 0 0 3
5. HUM1005 Cost Accounting for Engineers 3 0 0 0 3
6. HUM1006 Business Accounting for Engineers 3 0 0 0 3
7. HUM1007 Contemporary Legal Framework for Business 3 0 0 0 3
8. HUM1009 International Business 3 0 0 0 3
9. HUM1010 Foreign Trade Environment 3 0 0 0 3
10. HUM1011 Export Business 3 0 0 0 3
11. HUM1012 Introduction to Sociology 3 0 0 0 3
12. HUM1013 Population Studies 3 0 0 0 3
13. HUM1021 Ethics and Values 2 0 0 0 2
14. HUM1022 Psychology in Everyday Life 2 0 0 4 2
15. HUM1023 Indian Heritage and Culture 2 0 0 4 2
16. HUM1024 India and Contemporary World 2 0 0 4 2

B.TECH. (BCL) Page 12

 17. HUM1025 Indian Classical Music 1 0 2 4 1
18. HUM1033 Micro Economics 3 0 0 0 3
19. HUM1034 Macro Economics 3 0 0 0 3
20. HUM1035 Introductory Econometrics 2 0 2 0 2
21. Engineering Economics and Decision
HUM1036 2 0 0 4 2
Analysis
22. HUM1037 Applied Game Theory 2 0 0 4 2
23. HUM1038 International Economics 3 0 0 0 3
24. HUM1039 Community Development in India 2 0 0 4 2
25. HUM1040 Indian Social Problems 3 0 0 0 3
26. HUM1041 Indian Society Structure and Change 3 0 0 0 3
27. Industrial Relations and Labour Welfare in
HUM1042 3 0 0 0 3
India
28. HUM1043 Mass Media and Society 2 0 0 4 2
29. HUM1044 Network Society 3 0 0 0 3
30. HUM1045 Introduction to Psychology 2 0 2 0 2
31. HUM1706 Business Accounting for Engineers 3 0 0 0 3

B.TECH. (BCL) Page 13

 L T P J C
CHY1701 ENGINEERING CHEMISTRY
3 0 2 0 4

Syllabus version
Pre-requisite
1.0

Course Objectives:

1. To impart technological aspects of applied chemistry.

2. To lay foundation for practical application of chemistry in engineering aspects.

Expected Course Outcomes (CO): Students will be able to

1. Recall and analyze the issues related to impurities in water and their removal methods and
apply recent methodologies in water treatment for domestic and industrial usage.
2. Evaluate the causes of metallic corrosion and apply the methods for corrosion protection of
metals.
3. Evaluate the electrochemical energy storage systems such as lithium batteries, fuel cells and
solar cells, and design for usage in electrical and electronic applications.
4. Assess the quality of different fossil fuels and create an awareness to develop the alternative
fuels.
5. Analyze the properties of different polymers and distinguish the polymers which can be
degraded and demonstrate their usefulness.
6. Apply the theoretical aspects: (a) in assessing the water quality; (b) understanding the
construction and working of electrochemical cells; (c) analyzing metals, alloys and soil using
instrumental methods; (d) evaluating the viscosity and water absorbing properties of
polymeric materials

Module: 1 Water Technology 5 hours

Characteristics of hard water - hardness, DO, TDS in water and their determination – numerical
problems in hardness determination by EDTA; Modern techniques of water analysis for industrial
use - Disadvantages of hard water in industries.

Module: 2 Water Treatment 8 hours

Water softening methods: - Lime-soda, Zeolite and ion exchange processes and their applications.
Specifications of water for domestic use (ICMR and WHO); Unit processes involved in water
treatment for municipal supply - Sedimentation with coagulant- Sand Filtration - chlorination;
Domestic water purification – Candle filtration- activated carbon filtration; Disinfection methods-
Ultrafiltration, UV treatment, Ozonolysis, Reverse Osmosis; Electro dialysis.

Module: 3 Corrosion 6 hours

Dry and wet corrosion - detrimental effects to buildings, machines, devices & decorative art forms,
emphasizing Differential aeration, Pitting, Galvanic and Stress corrosion cracking; Factors that
enhance corrosion and choice of parameters to mitigate corrosion.

B.TECH. (BCL) Page 14

 Module: 4 Corrosion Control 4 hours
Corrosion protection - cathodic protection – sacrificial anodic and impressed current protection
methods; Advanced protective coatings: electroplating and electroless plating, PVD and CVD.
Alloying for corrosion protection – Basic concepts of Eutectic composition and Eutectic mixtures -
Selected examples – Ferrous and non-ferrous alloys.
Module: 5 Electrochemical Energy Systems 6 hours
Brief introduction to conventional primary and secondary batteries; High energy electrochemical
energy systems: Lithium batteries – Primary and secondary, its Chemistry, advantages and
applications.
Fuel cells – Polymer membrane fuel cells, Solid-oxide fuel cells- working principles, advantages,
applications.
Solar cells – Types – Importance of silicon single crystal, polycrystalline and amorphous
siliconsolar cells, dye sensitized solar cells - working principles, characteristics and applications.
Module: 6 Fuels and Combustion 8 hours
Calorific value - Definition of LCV, HCV. Measurement of calorific value using bomb calorimeter and
Boy’s calorimeter including numerical problems.
Controlled combustion of fuels - Air fuel ratio – minimum quantity of air by volume and by weight-
Numerical problems-three way catalytic converter- selective catalytic reduction of NOX; Knocking in IC
engines-Octane and Cetane number - Antiknocking agents.

Module: 7 Polymers 6 hours

Difference between thermoplastics and thermosetting plastics; Engineering application of plastics -
ABS, PVC, PTFE and Bakelite; Compounding of plastics: moulding of plastics for Car parts, bottle
caps (Injection moulding), Pipes, Hoses (Extrusion moulding), Mobile Phone Cases, Battery Trays,
(Compression moulding), Fibre reinforced polymers, Composites (Transfer moulding), PET bottles
(blow moulding);
Conducting polymers- Polyacetylene- Mechanism of conduction – applications (polymers in sensors,
self-cleaning windows)
Module: 8 Contemporary issues: 2 hours
Lecture by Industry Experts
Total Lecture hours 45 hours
Text Book(s)
1. Sashi Chawla, A Text book of Engineering Chemistry, Dhanpat Rai Publishing Co., Pvt. Ltd.,
Educational and Technical Publishers, New Delhi, 3rd Edition, 2015.
2. O.G. Palanna, McGraw Hill Education (India) Private Limited, 9th Reprint, 2015.
3. B. Sivasankar, Engineering Chemistry 1st Edition, Mc Graw Hill Education (India), 2008
4. "Photovoltaic solar energy: From fundamentals to Applications", Angà ̈le Reinders, Pierre
Verlinden, Wilfried van Sark, Alexandre Freundlich, Wiley publishers, 2017.
Reference Books
1. O. V. Roussak and H. D. Gesser, Applied Chemistry-A Text Book for Engineers and
Technologists, Springer Science Business Media, New York, 2nd Edition, 2013.
2. S. S. Dara, A Text book of Engineering Chemistry, S. Chand & Co Ltd., New Delhi, 20th
B.TECH. (BCL) Page 15
 Edition, 2013.

Mode of Evaluation: Internal Assessment (CAT, Quizzes, Digital Assignments) & FAT

List of Experiments
Sl.
Experiment title Hours
No.
Water Purification: Estimation of water hardness by EDTA method and
1. 3 hours
its removal by ion-exchange resin
Water Quality Monitoring:
2. Assessment of total dissolved oxygen in different water samples by
Winkler’s method 6 hours
3. Estimation of sulphate / chloride in drinking water by conductivity
method
Material Analysis: Quantitative colorimetric determination of divalent
4. metal ions of Ni/Fe/Cu using conventional and smart phone digital- 8 hours
imaging methods
5. Analysis of Iron in carbon steel by potentiometry 3 hours

6. Construction and working of an Zn-Cu electrochemical cell 4hours

Determination of viscosity-average molecular weight of different natural
7. 3 hours
/ synthetic polymers
Arduino microcontroller based sensor for monitoring pH / temperature /
8. 3 hours
conductivity in samples.
Total Laboratory Hours 30 hours
Mode of Evaluation: Viva-voce and Lab performance & FAT
Recommended by Board of Studies 31-05-2019
Approved by Academic Council 50th ACM Date 13-06-2019

B.TECH. (BCL) Page 16

 L T P J C
CSE1001 PROBLEM SOLVING AND PROGRAMMING
0 0 6 0 3
Syllabus Version
Pre-requisite NIL
1.0

Course Objectives:

1. To develop broad understanding of computers, programming languages and their

generations
2. Introduce the essential skills for a logical thinking for problem solving
3. To gain expertise in essential skills in programming for problem solving using computer

Expected Course Outcome:

1. Understand the working principle of a computer and identify the purpose of a computer
programming language.
2. Learn various problem solving approaches and ability to identify an appropriate
approach to solve the problem.
3. Differentiate the programming Language constructs appropriately to solve any problem.
4. Solve various engineering problems using different data structures.
5. Able to modulate the given problem using structural approach of programming.
6. Efficiently handle data using flat files to process and store data for the given problem.
List of Challenging Experiments (Indicative)
1. Steps in Problem Solving Drawing flowchart using yEd tool/Raptor Tool 4 Hours
2. Introduction to Python, Demo on IDE, Keywords, Identifiers, I/O Statements. 4 Hours
3. Simple Program to display Hello world in Python.
4. Operators and Expressions in Python 4 Hours
5. Algorithmic Approach 1: Sequential 4 Hours
6. Algorithmic Approach 2: Selection ( if, if.. else, nested if else 4 Hours
7. Algorithmic Approach 3: Iteration (while and for) 6 Hours
8. Strings and its Operations 6 Hours
9. Regular Expressions 6 Hours
10. List and its operations. 6 Hours
11. Dictionaries: operations 6 Hours
12. Tuples and its operations 6 Hours
13. Set and its operations 6 Hours
14. Functions, Recursions 6 Hours
15. Sorting Techniques (Bubble/Selection/Insertion) 6 Hours
16. Searching Techniques : Sequential Search and Binary Search 3 Hours
17. Files and its Operations 4 Hours
Total Lecture hours 90 hours
Text Book(s)
1. John V. Guttag., 2016. Introduction to computation and programming using python: with
applications to understanding data. PHI Publisher.

B.TECH. (BCL) Page 17

Reference Books
1. Charles Severance.2016.Python for everybody: exploring data in Python 3, Charles Severance.
2. Charles Dierbach.2013.Introduction to computer science using python: a computational
problem-solving focus. Wiley Publishers.
Mode of Evaluation: PAT / CAT / FAT
Recommended by Board of Studies 04.04.2014
Approved by Academic Council 38th ACM Date 23.10.2015

B.TECH. (BCL) Page 18

 PROBLEM SOLVING AND OBJECT ORIENTED L T P J C
CSE1002
PROGRAMMING 0 0 6 0 3

Syllabus version
Pre-requisite NIL
1.0
Course Objectives:
1. To emphasize the benefits of object oriented concepts
2. To enable the students to solve the real time applications using object oriented programming
features.
3. To improve the skills of a logical thinking and to solve the problems using any processing
elements
Expected Course Outcome:
1. Recall the basics of procedural programming and to represent the real world entities as
programming constructs.
2. Enumerate object oriented concepts and translate real-world applications into graphical
representations.
3. Demonstrate the usage of classes and objects of the real world entities in applications.
4. Discriminate the reusability and multiple interfaces with same functionality based features to
solve complex computing problems.
5. Propose possible error-handling constructs for unanticipated states/inputs and to use generic
programming constructs to accommodate different data types.
6. Validate the program against file inputs towards solving the problem.
Module: 1 Structured Programming 12 hours
Structured Programming conditional and looping statements-arrays – functions - pointers –
dynamic memory allocation - structure
Module: 2 Introduction to object oriented approach 10 hours
Introduction to object oriented approach: Why object oriented programming?- Characteristics of
object oriented language: classes and objects - encapsulation-data abstraction- inheritance -
polymorphism - Merits and Demerits of object oriented programming. UML- class diagram of
OOP - Inline function – default argument function- Exception handling (Standard) - reference:
independent reference – function returning reference – pass by reference.
Module: 3 Classes and objects 14 hours
Classes and objects: Definition of classes – access specifier – class versus structure – constructor –
destructor – copy constructor and its importance – array of objects – dynamic objects- friend
function-friend class
Module: 4 Polymorphism and Inheritance 26 hours
Polymorphism and Inheritance: Polymorphism-compile time polymorphism – function overloading
– operator overloading. Inheritance-types of inheritance- constructors and destructors in inheritance
– constraints of multiple inheritance-virtual base class - run time polymorphism-function
overriding.

B.TECH. (BCL) Page 19

 Module: 5 Exception handling and Templates 18 hours
Exception handling and Templates Exception handling(user-defined exception) - Function
template, Class template – Template with inheritance, STL – Container, Algorithm, Iterator -
vector, list, stack, map.
Module: 6 IO Streams and Files 10 hours
IOstreams and Files IOstreams, Manipulators - overloading Inserters (<<) and Extractors (>>)
Sequential and Random files – writing and reading objects into / from files
Total Lab hours 90 hours
Text Book(s)
1. Stanley B Lippman, Josee Lajoie, Barbara E, Moo, “C++ primer”, Fifth edition, Addison-
Wesley, 2012.
2. Ali Bahrami, Object oriented Systems development, Tata McGraw - Hill Education, 1999.
3. Brian W. Kernighan, Dennis M. Ritchie, The “C” programming Language, 2nd edition,
Prentice HallInc., 1988.
Reference Books
1. Bjarnestroustrup, The C++ programming Language, Addison Wesley, 4th edition, 2013.
2. Harvey M. Deitel and Paul J. Deitel, C++ How to Program, 7th edition, Prentice Hall, 2010.
3. Maureen Sprankle and Jim Hubbard, Problem solving and Programming concepts, 9th edition,
Pearson Education, 2014.
Mode of Evaluation: CAT / Assignment / Quiz / FAT / Project / Seminar
List of Challenging Experiments (Indicative)
1. Postman Problem10 hours
A postman needs to walk down every street in his area in order to deliver the mail. Assume
that the distances between the streets along the roads are given. The postman starts at the post
office and returns back to the post office after delivering all the mails. Implement an
algorithm to help the post man to walk minimum distance for the purpose.
2. Budget Allocation for Marketing Campaign15 hours
A mobile manufacturing company has got several marketing options such as Radio
advertisement campaign, TV non peak hours campaign, City top paper network, Viral
marketing campaign, Web advertising. From their previous experience, they have got a
statistics about pay backs for each marketing option. Given the marketing budget (rupees in
crores) for the current year and details of paybacks for each option, implement an algorithm
to determine the amount that shall spent on each marketing option so that the company
attains the maximum profit.
3. Missionaries and Cannibals10 hours
Three missionaries and three cannibals are on one side of a river, along with a boat that can
hold one or two people. Implement an algorithm to find a way to get everyone to the other
side of the river, without ever leaving a group of missionaries in one place outnumbered by
the cannibals in that place.

B.TECH. (BCL) Page 20

4. Register Allocation Problem15 hours
A register is a component of a computer processor that can hold any type of data and can be
accessed faster. As registers are faster to access, it is desirable to use them to the maximum
so that the code execution is faster. For each code submitted to the processor, a register
interference graph (RIG) is constructed. In a RIG, a node represents a temporary variable and
an edge is added between two nodes (variables) t1 and t2 if they are live simultaneously at
some point in the program. During register allocation, two temporaries can be allocated to the
same register if there is no edge connecting them. Given a RIG representing the
dependencies between variables in a code, implement an algorithm to determine the number
of registers required to store the variables and speed up the code execution.
5. Selective Job Scheduling Problem15 hours
A server is a machine that waits for requests from other machines and responds to them. The
purpose of a server is to share hardware and software resources among clients. All the clients
submit the jobs to the server for execution and the server may get multiple requests at a time.
In such a situation, the server schedule the jobs submitted to it based on some criteria and
logic. Each job contains two values namely time and memory required for execution.
Assume that there are two servers that schedules jobs based on time and memory. The
servers are named as Time_Schedule_Server and memory_Schedule_Server respectively.
Design a OOP model and implement the time_Schedule_Server and
memory_Schedule_Server. The Time_Schedule_Server arranges jobs based on time required
for execution in ascending order whereas memory_Schedule_Server arranges jobs based on
memory required for execution in ascending order.
6. Fragment Assembly in DNA Sequencing 15 hours
DNA, or deoxyribonucleic acid, is the hereditary material in humans and almost all other
organisms. The information in DNA is stored as a code made up of four chemical bases:
adenine (A), guanine (G), cytosine (C), and thymine (T). In DNA sequencing, each DNA is
sheared into millions of small fragments (reads) which assemble to form a single genomic
sequence (“superstring”). Each read is a small string. In such a fragment assembly, given a
set of reads, the objective is to determine the shortest superstring that contains all the reads.
For example, given a set of strings, {000, 001, 010, 011, 100, 101, 110, 111} the shortest
superstring is 0001110100. Given a set of reads, implement an algorithm to find the shortest
superstring that contains all the given reads.
7. House Wiring10 hours
An electrician is wiring a house which has many rooms. Each room has many power points
indifferent locations. Given a set of power points and the distances between them, implement
an algorithm to find the minimum cable required.
Total Laboratory Hours 90 hours
Recommended by Board of Studies 29.10.2015
Approved by Academic Council 39th ACM Date 17.12.2015

B.TECH. (BCL) Page 21

 L T P J C
ENG1901 TECHNICAL ENGLISH - I
0 0 4 0 2
Syllabus Version
Pre-requisite Foundation English-II
1
Course Objectives:
1. To enhance students’ knowledge of grammar and vocabulary to read and write error-free language
in real life situations.
2. To make the students’ practice the most common areas of written and spoken communications
skills.
3. To improve students’ communicative competency through listening and speaking activities in the
classroom.
Course Outcome:
1. Develop a better understanding of advanced grammar rules and write grammatically correct
sentences.
2. Acquire wide vocabulary and learn strategies for error-free communication.
3. Comprehend language and improve speaking skills in academic and social contexts.
4. Improve listening skills so as to understand complex business communication in a variety of
global English accents through proper pronunciation.
5. Interpret texts, diagrams and improve both reading and writing skills which would help them in
their academic as well as professional career.
Module: 1 Advanced Grammar 4 hours
Articles, Tenses, Voice and Prepositions
Activity: Worksheets on Impersonal Passive Voice, Exercises from the prescribed text
Module: 2 Vocabulary Building I 4 hours
Idioms and Phrases, Homonyms, Homophones and Homographs
Activity: Jigsaw Puzzles; Vocabulary Activities through Web tools
Module: 3 Listening for Specific Purposes 4 hours
Gist, monologues, short conversations, announcements, briefings and discussions
Activity: Gap filling; Interpretations
Module: 4 Speaking for Expression 6 hours
Introducing oneself and others, Making Requests & responses, Inviting and Accepting/Declining
Invitations
Activity: Brief introductions; Role-Play; Skit.
Module: 5 Reading for Information 4 hours
Reading Short Passages, News Articles, Technical Papers and Short Stories
Activity: Reading specific news paper articles; blogs
Module: 6 Writing Strategies 4 hours
Joining the sentences, word order, sequencing the ideas, introduction and conclusion
Activity: Short Paragraphs; Describing familiar events; story writing

B.TECH. (BCL) Page 22

Module: 7 Vocabulary Building II 4 hours
Enrich the domain specific vocabulary by describing Objects, Charts, Food, Sports and Employment.
Activity: Describing Objects, Charts, Food, Sports and Employment
Module: 8 Listening for Daily Life 4 hours
Listening for statistical information, Short extracts, Radio broadcasts and TV interviews
Activity: Taking notes and Summarizing
Module: 9 Expressing Ideas and Opinions 6 hours
Telephonic conversations, Interpretation of Visuals and describing products and processes.
Activity: Role-Play (Telephonic); Describing Products and Processes
Module: 10 Comprehensive Reading 4 hours
Reading Comprehension, Making inferences, Reading Graphics, Note-making, and Critical Reading.
Activity: Sentence Completion; Cloze Tests
Module: 11 Narration 4 hours
Writing narrative short story, Personal milestones, official letters and E-mails.
Activity: Writing an E-mail; Improving vocabulary and writing skills.
Module: 12 Pronunciation 4 hours
Speech Sounds, Word Stress, Intonation, Various accents
Activity: Practicing Pronunciation through web tools; Listening to various accents of English
Module: 13 Editing 4 hours
Simple, Complex & Compound Sentences, Direct & Indirect Speech, Correction of Errors,
Punctuations.
Activity: Practicing Grammar
Module: 14 Short Story Analysis 4 hours
“The Boundary” by Jhumpa Lahiri
Activity: Reading and analyzing the theme of the short story.
Total Lecture hours 60 hours
Text Book / Workbook
1. Wren, P.C.; Martin, H.; Prasada Rao, N.D.V. (1973–2010). High School English Grammar &
Composition. New Delhi: Sultan Chand Publishers.
2. Kumar, Sanjay, Pushp Latha. (2018) English Language and Communication Skills for
Engineers, India: Oxford University Press.

Reference Books
1. Guptha S C, (2012) Practical English Grammar & Composition, 1st Edition, India: Arihant Publishers.
2. Steven Brown, (2011) Dorolyn Smith, Active Listening 3, 3rd Edition, UK: Cambridge University
Press.
3. Liz Hamp-Lyons, Ben Heasley, (2010) Study Writing, 2nd Edition, UK: Cambridge University
Press.
4. Kenneth Anderson, Joan Maclean, (2013) Tony Lynch, Study Speaking, 2nd Edition, UK:
Cambridge, University Press.

B.TECH. (BCL) Page 23

 5. Eric H. Glendinning, Beverly Holmstrom, (2012) Study Reading, 2nd Edition, UK:
Cambridge University Press.
6. Michael Swan, (2017) Practical English Usage (Practical English Usage), 4th edition, UK:
Oxford University Press.
7. Michael McCarthy, Felicity O'Dell, (2015) English Vocabulary in Use Advanced (South
Asian Edition), UK: Cambridge University Press.
8. Michael Swan, Catherine Walter, (2012) Oxford English Grammar Course Advanced, Feb, 4th
Edition, UK: Oxford University Press.
9. Watkins, Peter. (2018) Teaching and Developing Reading Skills: Cambridge Handbooks for
Language teachers, UK: Cambridge University Press.
10. (The Boundary by Jhumpa Lahiri) URL:
https://www.newyorker.com/magazine/2018/01/29/the-boundary?intcid=inline_amp
Mode of evaluation: Quizzes, Presentation, Discussion, Role play, Assignments and FAT
List of Challenging Experiments (Indicative)
1. Self-Introduction 12 hours
2. Sequencing Ideas and Writing a Paragraph 12 hours
3. Reading and Analyzing Technical Articles 8 hours
4. Listening for Specificity in Interviews (Content Specific) 12 hours
5. Identifying Errors in a Sentence or Paragraph 8 hours
6. Writing an E-mail by narrating life events 8 hours
Total Laboratory Hours 60 hours
Mode of evaluation: Quizzes, Presentation, Discussion, Role play, Assignments and FAT
Recommended by Board of Studies 08.06.2019
Approved by Academic Council 55th ACM Date 13.06.2019

B.TECH. (BCL) Page 24

 L T P J C
ENG1902 TECHNICAL ENGLISH - II
0 0 4 0 2
Syllabus Version
Pre-requisite 71% to 90% EPT score
1
Course Objectives:
1. To acquire proficiency levels in LSRW skills on par with the requirements for placement
interviews of high-end companies / competitive exams.
2. To evaluate complex arguments and to articulate their own positions on a range of technical and
general topics.
3. To speak in grammatical and acceptable English with minimal MTI, as well as develop a vast
and active vocabulary.
Course Outcome:
1. Communicate proficiently in high-end interviews and exam situations and all social situations
2. Comprehend academic articles and draw inferences
3. Evaluate different perspectives on a topic
4. Write clearly and convincingly in academic as well as general contexts
5. Synthesize complex concepts and present them in speech and writing
Module: 1 Listening for Clear Pronunciation 4 hours

Ice-breaking, Introduction to vowels, consonants, diphthongs.

Listening to formal conversations in British and American accents (BBC and CNN) as well as
other ‘native’ accents
Activity: Factual and interpretive exercises; note-making in a variety of global English accents

Module: 2 Introducing Oneself 4 hours

Speaking: Individual Presentations
Activity: Self-Introductions, Extempore speech
Module: 3 Effective Writing 6 hours
Writing: Business letters and Emails, Minutes and Memos
Structure / template of common business letters and emails: inquiry / complaint / placing an order;
Formats of Minutes and Memos
Activity: Students write a business letter and Minutes/ Memo
Module: 4 Comprehensive Reading 4 hours
Reading: Reading Comprehension Passages, Sentence Completion (Technical and General
Interest), Vocabulary and Word Analogy
Activities: Cloze tests, Logical reasoning, Advanced grammar exercises
Module: 5 Listening to Narratives 4 hours
Listening: Listening to audio files of short stories, News, TV Clips / Documentaries, Motivational
Speeches in UK / US / global English accents.
Activity: Note-making and Interpretive exercises

B.TECH. (BCL) Page 25

 Module: 6 Academic Writing and Editing 6 hours
Writing: Editing / Proofreading symbols
Citation Formats
Structure of an Abstract and Research Paper
Activity: Writing Abstracts and research paper; Work with Editing / Proof reading exercise
Module: 7 Team Communication 4 hours
Speaking: Group Discussions and Debates on complex / contemporary topics
Discussion evaluation parameters, using logic in debates
Activity: Group Discussions on general topics
Module: 8 Career-oriented Writing 4 hours

Writing: Resumes and Job Application Letters, SOP

Activity: Writing resumes and SOPs

Module: 9 Reading for Pleasure 4 hours

Reading: Reading short stories

Activity: Classroom discussion and note-making, critical appreciation of the short story

Module: 10 Creative Writing 4 hours

Writing: Imaginative, narrative and descriptive prose

Activity: Writing about personal experiences, unforgettable incidents, travelogues

Module: 11 Academic Listening 4 hours

Listening: Listening in academic contexts

Activity: Listening to lectures, Academic Discussions, Debates, Review Presentations, Research
Talks, Project Review Meetings
Module: 12 Reading Nature-based Narratives 4 hours
Narratives on Climate Change, Nature and Environment
Activity: Classroom discussions, student presentations
Module: 13 Technical Proposals 4 hours
Writing: Technical Proposals
Activities: Writing a technical proposal
Module: 14 Presentation Skills 4 hours
Persuasive and Content-Specific Presentations
Activity: Technical Presentations
Total Lecture hours 60 hours

Text Book / Workbook

1. Oxenden, Clive and Christina Latham-Koenig. New English File: Advanced Students
Book. Paperback. Oxford University Press, UK, 2017.
2. Rizvi, Ashraf. Effective Technical Communication. McGraw-Hill India, 2017.

B.TECH. (BCL) Page 26

Reference Books
1. Oxenden, Clive and Christina Latham-Koenig, New English File: Advanced: Teacher’s
Book with Test and Assessment. CD-ROM: Six-level General English Course for Adults.
Paperback. Oxford University Press, UK, 2013.
2. Balasubramanian, T. English Phonetics for the Indian Students: A Workbook. Laxmi
Publications, 2016.
3. Philip Seargeant and Bill Greenwell, From Language to Creative Writing. Bloomsbury
Academic, 2013.
4. Krishnaswamy, N. Eco-English. Bloomsbury India, 2015.
5. Manto, Saadat Hasan. Selected Short Stories. Trans. Aatish Taseer. Random House India,
2012.
6. Ghosh, Amitav. The Hungry Tide. Harper Collins, 2016.
7. Ghosh, Amitav. The Great Derangement: Climate Change and the Unthinkable. Penguin
Books, 2016.
8. The MLA Handbook for Writers of Research Papers, 8th ed. 2016.
9. Online Sources:
https://americanliterature.com/short-short-stories. (75 short short stories)
http://www.eco-ction.org/dt/thinking.html (Leopold, Aldo. “Thinking like a
Mountain")
https://www.esl-lab.com/;
http://www.bbc.co.uk/learningenglish/;
https://www.bbc.com/news;
https://learningenglish.voanews.com/a/using-voa-learning-english-to-improve-
listening-skills/3815547.html
Mode of evaluation: Quizzes, Presentation, Discussion, Role play, Assignments and FAT

List of Challenging Experiments (Indicative)

1. Self-Introduction using SWOT 12 hours

2. Writing minutes of meetings 10 hours
3. Writing an abstract 10 hours
4. Listening to motivational speeches and interpretation 10 hours
5. Cloze Test 6 hours

6. Writing a proposal 12 hours

Total Laboratory Hours 60 hours

Mode of evaluation: Quizzes, Presentation, Discussion, Role play, Assignments and FAT

Recommended by Board of Studies 08.06.2019

Approved by Academic Council 55th ACM Date 13.06.2019

B.TECH. (BCL) Page 27

 L T P J C
ENG1903 ADVANCED TECHNICAL ENGLISH
0 0 2 4 2

Syllabus Version
Pre-requisite Greater than 90 % EPT score
1

Course Objectives:
1. To review literature in any form or any technical article
2. To infer content in social media and respond accordingly
3. To communicate with people across the globe overcoming trans-cultural barriers and
negotiate successfully
Course Outcome:

1. Analyze critically and write good reviews

2. Articulate research papers, project proposals and reports
3. Communicate effectively in a trans-cultural environment
4. Negotiate and lead teams towards success
5. Present ideas in an effective manner using web tools
Module: 1 Negotiation and Decision Making Skills through Literary Analysis 5 hours
Concepts of Negotiation and Decision Making Skills
Activity: Analysis of excerpts from Shakespeare’s “The Merchant of Venice” (court scene) and
discussion on negotiation skills.
Critical evaluation of excerpts from Shakespeare’s “Hamlet”(Monologue by Hamlet) and discussion
on decision making skills
Module: 2 Writing reviews and abstracts through movie interpretations 5 hours
Review writing and abstract writing with competency
Activity: Watching Charles Dickens “Great Expectations” and writing a movie review
Watching William F. Nolan’s “Logan’s Run” and analyzing it in tune with the present scenario of
depletion of resources and writing an abstract
Module: 3 Technical Writing 4 hours

Stimulate effective linguistics for writing: content and style

Activity: Proof reading
Statement of Purpose

Module: 4 Trans-Cultural Communication 4 hours

Nuances of Trans-cultural communication
Activity:
Group discussion and case studies on trans-cultural communication.
Debate on trans-cultural communication.

B.TECH. (BCL) Page 28

Module: 5 Report Writing and Content Writing 4 hours
Enhancing reportage on relevant audio-visuals
Activity:
Watch a documentary on social issues and draft a report
Identify a video on any social issue and interpret
Module: 6 Drafting project proposals and article writing 4 hours
Dynamics of drafting project proposals and research articles
Activity:
Writing a project proposal.
Writing a research article.
Module: 7 Technical Presentations 4 hours
Build smart presentation skills and strategies
Activity: Technical presentations using PPT and Web tools
Total Lecture hours 30 hours
Text Book / Workbook
1. Raman, Meenakshi & Sangeeta Sharma. Technical Communication: Principles and
Practice, 3rd edition, Oxford University Press, 2015.
Reference Books
1. Basu B.N. Technical Writing, 2011 Kindle edition.
2. Arathoon, Anita. Shakespeare’s The Merchant of Venice (Text with Paraphrase), Evergreen
Publishers, 2015.
3. Kumar, Sanjay and Pushp Lata. English Language and Communication Skills for Engineers,
Oxford University Press, India, 2018.
4. Frantisek, Burda. On Transcultural Communication, 2015, LAP Lambert Academic
Publishing, UK.
5. Geever, C. Jane. The Foundation Center’s Guide to Proposal Writing, 5th Edition, 2007,
Reprint 2012 The Foundation Center, USA.
6. Young, Milena. Hacking Your Statement of Purpose: A Concise Guide to Writing Your SOP,
2014 Kindle Edition.
7. Ray, Ratri, William Shakespeare's Hamlet, The Atlantic Publishers, 2011.
8. C Muralikrishna & Sunitha Mishra, Communication Skills for Engineers, 2nd edition, NY:
Pearson, 2011.
Mode of Evaluation: Quizzes, Presentation, Discussion, Role Play, Assignments
List of Challenging Experiments (Indicative)
1. Enacting a court scene - Speaking 6 hours

2. Watching a movie and writing a review 4 hours

3. Trans-cultural – case studies 2 hours

4. Drafting a report on any social issue 6 hours

5. Technical Presentation using web tools 6 hours

B.TECH. (BCL) Page 29

6. Writing a research paper 6 hours

J- Component Sample Projects

1. Short Films
2. Field Visits and Reporting

3. Case studies

4. Writing blogs

5. Vlogging
Total Hours (J-Component) 60 hours
Mode of evaluation: Quizzes, Presentation, Discussion, Role play, Assignments and FAT
Recommended by Board of Studies 08.06.2019
Approved by Academic Council 55th ACM Date 13.06.2019

B.TECH. (BCL) Page 30

 L T P J C
HUM1021 ETHICS AND VALUES
2 0 0 0 2
Syllabus version
Pre-requisite Nil
1.2
Course Objectives:
1. To understand and appreciate the ethical issues faced by an individual in profession, society and
polity
2. To understand the negative health impacts of certain unhealthy behaviors
3. To appreciate the need and importance of physical, emotional health and social health
Expected Course Outcome:
Students will be able to:
1. Follow sound morals and ethical values scrupulously to prove as good citizens
2. Understand various social problems and learn to act ethically
3. Understand the concept of addiction and how it will affect the physical and mental health
4. Identify ethical concerns in research and intellectual contexts, including academic integrity,
use and citation of sources, the objective presentation of data, and the treatment of human
subjects
5. Identify the main typologies, characteristics, activities, actors and forms of cybercrime
Module: 1 Being good and responsible 5 hours
Gandhian values such as truth and non-violence – comparative analysis on leaders of past and
present – society’s interests versus self-interests–Personal Social Responsibility: Helping the needy,
charity and serving the society.
Module: 2 Social Issues 1 4 hours
Harassment – types - Prevention of harassment, violence and terrorism
Module: 3 Social Issues 2 4 hours
Corruption: ethical values, causes, impact, laws, prevention – electoral malpractices white collar
crimes – tax evasions – unfair trade practices
Module: 4 Addiction and Health 3 hours
Peer pressure - Alcoholism: ethical values, causes, impact, laws, prevention – Ill effects of smoking
– Prevention of Suicides
Sexual Health: Prevention and impact of pre-marital pregnancy and Sexually Transmitted Diseases
Module: 5 Drug Abuse 4 hours
Abuse of different types of legal and illegal drugs: ethical values, causes, impact, laws and
prevention
Module: 6 Personal and Professional Ethics 3 hours
Dishonesty - Stealing - Malpractices in Examinations – Plagiarism
Module: 7 Abuse of technologies 4 hours
Hacking and other cyber-crimes, addiction to mobile phone usage, video games and social

B.TECH. (BCL) Page 31

networking websites
Module: 8 Invited Talk: Contemporary Issues 3 hours
Total Lecture hours 30 hours
Reference Books
1. Dhaliwal, K.K (2016), “Gandhian Philosophy of Ethics: A Study of Relationship between
his Presupposition and Precepts, Writers Choice, New Delhi, India.
2. Vittal, N (2012), “Ending Corruption? - How to Clean up India?”, Penguin Publishers, UK.
3. Pagliaro, L.A. and Pagliaro, A.M (2012), “Handbook of Child and Adolescent Drug and
Substance Abuse: Pharmacological, Developmental and Clinical Considerations”, Wiley
Publishers, U.S.A.
4. Pandey, P. K (2012), “Sexual Harassment and Law in India”, Lambert Publishers, Germany.
Mode of Evaluation: CAT, Assignment, Quiz, FAT and Seminar
Recommended by Board of Studies 26.07.2017
Approved by Academic Council 46th ACM Date 24.08.2017

B.TECH. (BCL) Page 32

 L T P J C
MAT1011 CALCULUS FOR ENGINEERS
3 0 2 0 4

Syllabus Version
Pre-requisite 10+2 Mathematics or MAT1001
1.0
Course Objectives :
1. To provide the requisite and relevant background necessary to understand the other
important engineering mathematics courses offered for Engineers and Scientists.
2. To introduce important topics of applied mathematics, namely Single and Multivariable
Calculus and Vector Calculus etc.
3. To impart the knowledge of Laplace transform, an important transform technique for
Engineers which requires knowledge of integration
Expected Course Outcome:
At the end of this course the students should be able to
1. Apply single variable differentiation and integration to solve applied problems in
engineering and find the maxima and minima of functions
2. Understand basic concepts of Laplace Transforms and solve problems with periodic
functions, step functions, impulse functions and convolution
3. Evaluate partial derivatives, limits, total differentials, Jacobians, Taylor series and
optimization problems involving several variables with or without constraints
4. Evaluate multiple integrals in Cartesian, Polar, Cylindrical and Spherical coordinates.
5. Understand gradient, directional derivatives, divergence, curl and Greens’, Stokes, Gauss
theorems
6. Demonstrate MATLAB code for challenging problems in engineering
Module: 1 Application of Single Variable Calculus 9 hours
Differentiation-Extrema on an Interval-Rolle’s Theorem and the Mean Value Theorem-Increasing
and Decreasing functions and First derivative test-Second derivative test-Maxima and Minima-
Concavity. Integration-Average function value - Area between curves - Volumes of solids of
revolution - Beta and Gamma functions–interrelation
Module: 2 Laplace transforms 7 hours

Definition of Laplace transform-Properties-Laplace transform of periodic functions-Laplace

transform of unit step function, Impulse function-Inverse Laplace transform-Convolution.

Module: 3 Multivariable Calculus 4 hours

Functions of two variables-limits and continuity-partial derivatives –total differential-Jacobian
and its properties.
Module: 4 Application of Multivariable Calculus 5 hours
Taylor’s expansion for two variables–maxima and minima–constrained maxima and minima-
Lagrange’s multiplier method.
Module: 5 Multiple integrals 8 hours

B.TECH. (BCL) Page 33

Evaluation of double integrals–change of order of integration–change of variables between
Cartesian and polar co-ordinates - Evaluation of triple integrals-change of variables between
Cartesian and cylindrical and spherical co-ordinates- evaluation of multiple integrals using
gamma and beta functions.
Module: 6 Vector Differentiation 5 hours
Scalar and vector valued functions – gradient, tangent plane–directional derivative-divergence and
curl–scalar and vector potentials–Statement of vector identities-Simple problems
Module: 7 Vector Integration 5 hours
line, surface and volume integrals - Statement of Green’s, Stoke’s and Gauss divergence theorems
-verification and evaluation of vector integrals using them.
Module: 8 Contemporary Issues 2 hours
Industry Expert Lecture
Total Lecture hours 45 hours
Text Book(s)
1. Thomas’ Calculus, George B. Thomas, D. Weir and J. Hass, 13th edition, Pearson, 2014.
2. Advanced Engineering Mathematics, Erwin Kreyszig, 10th Edition, Wiley India, 2015.
Reference Books
Higher Engineering Mathematics, B.S. Grewal, 43rd Edition, Khanna Publishers, 2015
1.
Higher Engineering Mathematics, John Bird, 6th Edition, Elsevier Limited, 2017.
2.
Calculus: Early Transcendentals, James Stewart, 8th edition, Cengage Learning, 2017.
3.
Engineering Mathematics, K. A. Stroud and Dexter J. Booth, 7thEdition, Palgrave
4.
Macmillan (2013)
Mode of Evaluation: Digital Assignments, Quiz, Continuous Assessments, Final Assessment
Test
List of Challenging Experiments (Indicative)

1. Introduction to MATLAB through matrices, and general Syntax 3 hours

Plotting and visualizing curves and surfaces in MATLAB – Symbolic
2. 3 hours
computations using MATLAB
3. Evaluating Extremum of a single variable function 3 hours
4. Understanding integration as Area under the curve 3 hours
5. Evaluation of Volume by Integrals (Solids of Revolution ) 3 hours
6. Evaluating maxima and minima of functions of several variables 3 hours
7. Applying Lagrange multiplier optimization method 2 hours
8. Evaluating Volume under surfaces 2 hours
9. Evaluating triple integrals 2 hours
10. Evaluating gradient, curl and divergence 2 hours

B.TECH. (BCL) Page 34

 11. Evaluating line integrals in vectors 2 hours
12. Applying Green's theorem to real world problems 2 hours
Total Laboratory Hours 30 hours
Mode of Assessment: Weekly Assessment, Final Assessment Test
Recommended by Board of Studies 12.06.2015
Approved by Academic Council 37th ACM Date 16.06.2015

B.TECH. (BCL) Page 35

 L T P J C
MAT2001 STATISTICS FOR ENGINEERS
3 0 2 0 4

Syllabus Version:
Prerequisites MAT1011 – Calculus for Engineers
1.1
Course Objectives :
1. To provide students with a framework that will help them choose the appropriate descriptive
methods in various data analysis situations.
2. To analyse distributions and relationship of real-time data.
3. To apply estimation and testing methods to make inference and modelling techniques for
decision making.
Expected Course Outcome:
At the end of the course the student should be able to:
1. Compute and interpret descriptive statistics using numerical and graphical techniques.
2. Understand the basic concepts of random variables and find an appropriate distribution for
analysing data specific to an experiment.
3. Apply statistical methods like correlation, regression analysis in analysing, interpreting
experimental data.
4. Make appropriate decisions using statistical inference that is the central to experimental
research.
5. Use statistical methodology and tools in reliability engineering problems.
6. Demonstrate R programming for statistical data
Module: 1 Introduction to Statistics 6 hours
Introduction to statistics and data analysis-Measures of central tendency–Measures of variability-
[Moments-Skewness-Kurtosis (Concepts only)].
Module: 2 Random variables 8 hours
Introduction–random variables–Probability mass Function, distribution and density functions–joint
Probability distribution and joint density functions–Marginal, conditional distribution and density
functions–Mathematical expectation, and its properties Covariance, moment generating function–
characteristic function.
Module: 3 Correlation and regression 4 hours
Correlation and Regression – Rank Correlation– Partial and Multiple correlation– Multiple regression.
Module: 4 Probability Distributions 7 hours
Binomial and Poisson distributions – Normal distribution – Gamma distribution – Exponential
distribution – Weibull distribution.
Module: 5 Hypothesis Testing I 4 hours
Testing of hypothesis – Introduction–Types of errors, critical region, procedure of testing hypothesis-
Large sample tests– Z test for Single Proportion, Difference of Proportion, mean and difference of
means.

B.TECH. (BCL) Page 36

Module: 6 Hypothesis Testing II 9 hours
Small sample tests- Student’s t-test, F-test- chi-square test- goodness of fit - independence of attributes-
Design of Experiments - Analysis of variance – one and two way classifications - CRD-RBD-LSD.
Module: 7 Reliability 5 hours
Basic concepts-Hazard function-Reliabilities of series and parallel systems-System Reliability-
Maintainability-Preventive and repair maintenance-Availability.
Module: 8 Contemporary Issues 2 hours
Industry Expert Lecture
Total Lecture hours 45 hours
Text book(s)
1. Probability and Statistics for engineers and scientists, R. E. Walpole, R. H. Myers, S. L. Mayers
and K. Ye, 9th Edition, Pearson Education (2012).
2. Applied Statistics and Probability for Engineers, Douglas C. Montgomery, George C. Runger,
6th Edition, John Wiley & Sons (2016).
Reference books
1. Reliability Engineering, E. Balagurusamy, Tata McGraw Hill, Tenth reprint 2017.
2. Probability and Statistics, J. L. Devore, 8th Edition, Brooks/Cole, Cengage Learning (2012).
3. Probability and Statistics for Engineers, R. A. Johnson, Miller Freund’s, 8th edition, Prentice
Hall India (2011).
4. Probability, Statistics and Reliability for Engineers and Scientists, Bilal M. Ayyub and Richard
H. McCuen, 3rdedition, CRC press (2011).
Mode of Evaluation: Digital Assignments, Continuous Assessment Tests, Quiz, Final Assessment
Test.
List of Experiments (Indicative)
1. Introduction: Understanding Data types; importing/exporting data. 3 hours
Computing Summary Statistics /plotting and visualizing data using 3 hours
2.
Tabulation and Graphical Representations.
Applying correlation and simple linear regression model to real dataset; 3 hours
3.
computing and interpreting the coefficient of determination.
Applying multiple linear regression model to real dataset; computing and 3 hours
4.
interpreting the multiple coefficient of determination.
5. Fitting the following probability distributions: Binomial distribution 3 hours

6. Normal distribution, Poisson distribution 3 hours

Testing of hypothesis for One sample mean and proportion from real-time 3 hours
7.
problems.
Testing of hypothesis for Two sample means and proportion from real-time 3 hours
8.
problems
9. Applying the t test for independent and dependent samples 2 hours
Applying Chi-square test for goodness of fit test and Contingency test to real 2 hours
10.
dataset
B.TECH. (BCL) Page 37
 Performing ANOVA for real dataset for Completely randomized design, 2 hours
11. Randomized Block design, Latin square Design

Total laboratory hours 30 hours

Mode of Evaluation: Weekly Assessment, Final Assessment Test

Recommended by Board of Studies 25.02.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 38

 L T P J C
TECHNICAL ANSWERS FOR REAL WORLD
CLE1901
PROBLEMS (TARP) 1 0 0 4 2

Syllabus version
Pre-requisite PHY1999 and 115 Credits Earned
1.0

Course Objectives:
1. To help students to identify the need for developing newer technologies for industrial /
societal needs.
2. To train students to propose and implement relevant technology for the development of the
prototypes / products.
3. To make the students learn to the use the methodologies available for analysing the
developed prototypes / products.

Expected Course Outcome:

At the end of the course, the student will be able to
1. Identify real life problems related to society
2. Apply appropriate technology (ies) to address the identified problems using engineering
principles and arrive at innovative solutions
Module: 1 15 hours

1. Identification of real life problems

2. Field visits can be arranged by the faculty concerned
3. 6 – 10 students can form a team (within the same / different discipline)
4. Minimum of eight hours on self-managed team activity
5. Appropriate scientific methodologies to be utilized to solve the identified issue
6. Solution should be in the form of fabrication/coding/modeling/product design/process
design/relevant scientific methodology(ies)
7. Consolidated report to be submitted for assessment
8. Participation, involvement and contribution in group discussions during the contact hours
will be used as the modalities for the continuous assessment of the theory component
9. Project outcome to be evaluated in terms of technical, economical, social, environmental,
political and demographic feasibility
10. Contribution of each group member to be assessed
11. The project component to have three reviews with the weightage of 20:30:50
Mode of Evaluation: (No FAT) Continuous Assessment the project done – Mark weightage of
20:30:50 – project report to be submitted, presentation and project reviews
Recommended by Board of Studies 28.02.2016
Approved by Academic Council 37th ACM Date 16.06.2016

B.TECH. (BCL) Page 39

 L T P J C
CLE1902 INDUSTRY INTERNSHIP
0 0 0 0 1

Syllabus version
Pre-requisite Completion of minimum of Two semesters
1.0
Course Objectives:
1. The course is designed so as to expose the students to industry environment and to take up on-
site assignment as trainees or interns.
Expected Course Outcome:
At the end of this internship the student should be able to:
1. Have an exposure to industrial practices and to work in teams
2. Communicate effectively
3. Understand the impact of engineering solutions in a global, economic, environmental and
societal context
4. Develop the ability to engage in research and to involve in life-long learning
5. Comprehend contemporary issues
6. Engage in establishing his / her digital footprint

Contents 4 Weeks

Four weeks of work at industry site.

Supervised by an expert at the industry.
Mode of assessment: Internship Report, Presentation and Project Review
Recommended by Board of Studies 28.02.2016
Approved by Academic Council 37th ACM Date 16.06.2016

B.TECH. (BCL) Page 40

 L T P J C
CLE1903 COMPREHENSIVE EXAMINATION
0 0 0 0 1

Syllabus version
Pre-requisite NIL
1.0
Course Objectives:
1. To help students to identify the need for developing newer technologies for industrial /
societal needs
2. To train students to propose and implement relevant technology for the development of the
prototypes / products
3. To make the students learn to the use the methodologies available for analysing the
developed prototypes / products
Expected Course Outcome:
At the end of the course, the student will be able to
1. Identify real life problems related to society
2. Apply appropriate technology (ies) to address the identified problems using engineering
principles and arrive at innovative solutions
Module: 1 Structural Engineering 15 hours
Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal
forces in structures; Friction and its applications; Kinematics of point mass and rigid body; Centre
of mass; Euler’s equations of motion; Impulse-momentum; Energy methods; Principles of virtual
work.

Solid Mechanics: Bending moment and shear force in statically determinate beams; Simple stress
and strain relationships; Theories of failures; Simple bending theory, flexural and shear stresses,
shear centre; Uniform torsion, buckling of column, combined and direct bending stresses.
Structural Analysis: Statically determinate and indeterminate structures by energy methods;
Analysis of trusses, arches, beams, and frames; Displacement methods: Slope deflection and
moment distribution methods; Influence lines; Stiffness and flexibility methods of structural
analysis.

Steel Structures: Working stress and Limit state design concepts; Design of tension and
compression members, beams and beam- columns, column bases; Connections - simple and
eccentric, beam-column connections, plate girders and trusses; Plastic analysis of beams and frames.
Concrete Structures: Working stress, Limit state and Ultimate load design concepts; Design of
beams, slabs, columns; Bond and development length; Prestressed concrete; Analysis of beam
sections at transfer and service loads.

Construction Materials and Management: Construction Materials: Structural steel - composition,

material properties and behaviour; Concrete - constituents, mix design, short-term and long-term
properties; Bricks and mortar; Timber. Construction Management: Types of construction projects;
Tendering and construction contracts; Rate analysis and standard specifications; Cost estimation;
Project planning and network analysis - PERT and CPM

B.TECH. (BCL) Page 41

Module: 2 Geotechnical Engineering

Soil Mechanics: Origin of soils, soil structure and fabric; Three-phase system and phase
relationships, index properties; Unified and Indian standard soil classification system; Permeability -
one dimensional flow, Darcy’s law; Seepage through soils - two-dimensional flow, flow nets;
Principle of effective stress, capillarity, seepage force and quicksand condition; Compaction in
laboratory and field conditions; One dimensional consolidation, time rate of consolidation; Mohr’s
circle, effective and total shear strength parameters, characteristics of clays and sand.
Foundation Engineering: Sub-surface investigations - scope, drilling bore holes, sampling, plate
load test, standard penetration and cone penetration tests; Rankine’s Earth pressure theory; Stability
of slopes - finite and infinite slopes, method of slices and Bishop’s method; Stress distribution in
soils - Boussinesq’s and Westergaard’s theories, pressure bulbs; Shallow foundations - Terzaghi’s
bearing capacity theory, effect of water table; Combined footing and raft foundation; Contact
pressure; Settlement analysis in sands and clays; Deep foundations - types of piles, dynamic and
static formulae, load capacity of piles in sands and clays, pile load test, negative skin friction.

Module: 3 Water Resources Engineering

Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum, energy and
corresponding equations; Potential flow, applications of momentum and energy equations; Laminar
and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth.

Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional
analysis and hydraulic similitude; Kinematics of flow, velocity triangles; Basics of hydraulic
machines, specific speed of pumps and turbines; Channel Hydraulics - Energy-depth relationships,
specific energy, critical flow, slope profile, hydraulic jump, uniform flow and gradually varied flow

Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed,

infiltration, unit hydrographs, hydrograph analysis, flood estimation and routing, reservoir capacity,
reservoir and channel routing, surface run-off models, ground water hydrology - steady state well
hydraulics and aquifers; Application of Darcy’s law; Geophysical investigation.

Irrigation: Duty, delta, estimation of evapo-transpiration; Crop water requirements; Design of lined
and unlined canals, head works, gravity dams and spillways; Design of weirs on permeable
foundation; Types of irrigation systems, irrigation methods; Water logging and drainage; Canal
regulatory works, cross-drainage structures, outlets and escapes.

Module: 4 Environmental Engineering

Water: Quality standards, basic unit processes and operations for water treatment. Drinking water
standards, water requirements, basic unit operations and unit processes for surface water treatment,
distribution of water.

Waste Water: Sewage treatment, quantity and characteristics of wastewater. Primary, secondary
and tertiary treatment of wastewater, effluent discharge standards. Domestic wastewater treatment,
quantity of characteristics of domestic wastewater, primary and secondary treatment. Unit
operations and unit processes of domestic wastewater, sludge disposal.

B.TECH. (BCL) Page 42

Module: 5 Transportation and Geomatics Engineering
Transportation Infrastructure: Highway alignment and engineering surveys; Geometric design of
highways - cross-sectional elements, sight distances, horizontal and vertical alignments.

Highway Pavements: Highway construction; Highway materials - desirable properties and quality
control tests; Design of bituminous paving mixes; Design factors for flexible and rigid pavements;
Design of flexible pavement using IRC: 37-2012; Design of rigid pavements using IRC: 58-2011;
Failures in flexible and rigid pavements.

Traffic Engineering: Traffic studies on flow, speed, travel time - delay and O-D study, PCU, peak
hour factor, parking study, accident study and analysis; Microscopic and macroscopic parameters of
traffic flow, fundamental relationships; Control devices; Types of intersections and channelization.

Surveying: Principles of surveying; Errors and their adjustment; Maps - scale, coordinate system;
Distance and angle measurement - Leveling and trigonometric leveling; Traversing and
triangulation survey; Total station; Horizontal and vertical curves; Basics of Geographical
information system (GIS) and Geographical Positioning system (GPS).
Mode of Evaluation: (No FAT) Continuous Assessment the project done – Mark weightage of
20:30:50 – project report to be submitted, presentation and project reviews

Recommended by Board of Studies 28.02.2016

Approved by Academic Council 37th ACM Date 16.06.2016

B.TECH. (BCL) Page 43

 L T P J C
CLE1904 CAPSTONE PROJECT
0 0 0 0 12

Syllabus version
Pre-requisite As per the academic regulations
1.0
Course Objectives:
To provide sufficient hands-on learning experience related to the design, development and analysis of
suitable product / process so as to enhance the technical skill sets in the chosen field.
Expected Course Outcome:
At the end of the course the student will be able to
1. Formulate specific problem statements for ill-defined real life problems with reasonable
assumptions and constraints.
2. Perform literature search and / or patent search in the area of interest.
3. Conduct experiments / Design and Analysis / solution iterations and document the results.
4. Perform error analysis / benchmarking / costing
5. Synthesise the results and arrive at scientific conclusions / products / solution
6. Document the results in the form of technical report / presentation
Topics
1. Capstone Project may be a theoretical analysis, modeling & simulation, experimentation &
analysis, prototype design, fabrication of new equipment, correlation and analysis of data,
software development, applied research and any other related activities.
2. Project can be for one or two semesters based on the completion of required number of credits
as per the academic regulations.
3. Can be individual work or a group project, with a maximum of 3 students.
4. In case of group projects, the individual project report of each student should specify the
individual’s contribution to the group project.
5. Carried out inside or outside the university, in any relevant industry or research institution.
6. Publications in the peer reviewed journals / International Conferences will be an added
advantage
Mode of Evaluation: Periodic reviews, Presentation, Final oral viva, Poster submission
Recommended by Board of Studies 10.06.2015
Approved by Academic Council 37th ACM Date 16.06.2015

B.TECH. (BCL) Page 44

 L T P J C
MGT1022 LEAN START-UP MANAGEMENT
1 0 0 4 2

Syllabus version
Pre-requisite Nil
v. 2.2

Course Objectives:

1. The objective of the course is to make a student to create and commercialize the product

Course Outcome:
Upon successful completion of the course the students will be able to
1. Understand developing business models and growth drivers
2. Use the business model canvas to map out key components of enterprise
3. Analyze market size, cost structure, revenue streams, and value chain
4. Understand build-measure-learn principles
5. Foreseeing and quantifying business and financial risks

Module: 1 2 hours

Creativity and Design Thinking (identify the vertical for business opportunity, understand your
customers, accurately assess market opportunity)
Module: 2 3 hours

Minimum Viable Product (Value Proposition, Customer Segments, Build-measure-learn process)

Module: 3 3 hours
Business Model Development(Channels and Partners, Revenue Model and streams, Key Resources,
Activities and Costs, Customer Relationships and Customer Development Processes, Business
model canvas –the lean model-templates)

Module: 4 3 hours
Business Plan and Access to Funding (visioning your venture, taking the product / service to
market, Market plan including Digital & Viral Marketing, start-up finance – Costs / Profits &
Losses / cash flow, Angel / VC, / Bank Loans and Key elements of raising money)
Module: 5 2 hours

Legal, Regulatory, CSR, Standards, Taxes

Module: 6 Contemporary discussion 2 hours

Total Lecture hours 15 hours

B.TECH. (BCL) Page 45

Text Book(s)
1. Steve Blank, K & S Ranch (2012) The Startup Owner's Manual: The Step-By-Step Guide
for Building a Great Company, 1st edition.
2. Steve Blank (2013) The Four Steps to the Epiphany, K&S Ranch; 2nd edition.
3. Eric Ries (2011) The Lean Startup: How Today's Entrepreneurs Use Continuous
Innovation to Create Radically Successful Businesses, Crown Business.
Reference Books
1. Steve Blank (2014) Holding a Cat by the Tail, , K&S Ranch Publishing LLC.
2. Karal T Ulrich, Product Design and Development, SDEppinger, McGraw Hill.
3. Peter Thiel, (2014) Zero to One: Notes on Startups, or How to Build the Future, Crown
Business.
4. Lean Analytics: Use Data to Build a Better Startup Faster (Lean Series), Alistair Croll &
st
Benjamin Yoskovitz, O'Reilly Media; 1 Edition.
5. Marty Cagan, (2008) Inspired: How to Create Products Customers Love, SVPG Press; 1st
edition.
J Component 60 hours

Recommended by Board of Studies 17.08.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 46

 L T P J C
PHY1701 ENGINEERING PHYSICS
3 0 2 0 4

Syllabus version
Pre-requisite Physics of 12th standard or equivalent
1.0

Course Objectives:

To enable the students to understand the basics of the latest advancements in Physics viz., Quantum
Mechanics, Nanotechnology, Lasers, Electro Magnetic Theory and Fiber Optics.
Expected Course Outcome:
On completion of this course the students will be able to:
1. To understand the dual nature of radiation and matter.
2. To apply Schrodinger’s equations to solve finite and infinite potential problems.
3. To apply quantum ideas at the nanoscale.
4. To apply quantum ideas for understanding the operation and working principle of
optoelectronic devices.
5. To analyze the Maxwell’s equations in differential and integral form.
6. To classify the optical fiber for different Engineering applications.
7. To apply concept of Lorentz Transformation for engineering applications.
8. To demonstrate the quantum mechanical ideas – Lab
Module: 1 Introduction to Modern Physics 6 hours
Planck’s concept (hypothesis), Compton Effect, Particle properties of wave: Matter Waves,
Davisson Germer Experiment, Heisenberg Uncertainty Principle, Wave function, and Schrodinger
equation (time dependent & independent).
Module: 2 Applications of Quantum Physics 5 hours
Particle in a 1-D box (Eigen Value and Eigen Function), 3-D Analysis (Qualitative), Tunneling
Effect (Qualitative) (AB 205), Scanning Tunneling Microscope (STM).
Module: 3 Nanophysics 5 hours
Introduction to Nano-materials, Moore’s law, Properties of Nano-materials, Quantum confinement,
Quantum well, wire & dot, Carbon Nano-tubes (CNT), Applications of nanotechnology in industry.
Module: 4 Laser Principles and Engineering Application 6 hours
Laser Characteristics, Spatial and Temporal Coherence, Einstein Coefficient & its significance,
Population inversion, Two, three & four level systems, Pumping schemes, Threshold gain
coefficient, Components of laser, Nd-YAG, He-Ne, CO2 and Dye laser and their engineering
applications.

Module: 5 Electromagnetic Theory and its application 6 hours

Physics of Divergence, Gradient and Curl, Qualitative understanding of surface and volume integral,
Maxwell Equations (Qualitative), Wave Equation (Derivation), EM Waves, Phase velocity, Group
velocity, Group index , Wave guide (Qualitative)
B.TECH. (BCL) Page 47
 Propagation of EM waves in Optical fibers and
Module: 6 6 hours
Optoelectronic Devices
Light propagation through fibers, Acceptance angle, Numerical Aperture, Types of fibers - step
index, graded index, single mode & multimode, Attenuation, Dispersion-intermodal and intramodal.
Sources-LED & Laser Diode, Detectors-Photodetectors- PN & PIN - Applications of fiber optics in
communication- Endoscopy.
Module: 7 Special Theory of Relativity 9 hours
Frame of reference, Galilean relativity, Postulate of special theory of relativity, Simultaneity, length
contraction and time dilation.
Module: 8 Contemporary issues 2 hours
Lecture by Industry Experts
Total Lecture hours 45 hours
Text Book (s)
1. Arthur Beiser et al., Concepts of Modern Physics, 2013, Sixth Edition, Tata McGraw Hill.
William Silfvast.
2. Laser Fundamentals, 2008, Cambridge University Press.
3. D. J. Griffith, Introduction to Electrodynamics, 2014, 4th Edition, Pearson.
4. Djafar K. Mynbaev and Lowell L. Scheiner, Fiber Optic Communication Technology,
2011, Pearson.
Reference Books
Raymond A. Serway, Clement J. Mosses, Curt A. Moyer Modern Physics, 2010, 3rd Indian Edition
Cengage learning.
John R. Taylor, Chris D. Zafiratos and Michael A. Dubson, Modern Physics for Scientists and
Engineers, 2011, PHI Learning Private Ltd.
Kenneth Krane Modern Physics, 2010, Wiley Indian Edition.
Nityanand Choudhary and Richa Verma, Laser Systems and Applications, 2011, PHI Learning
Private Ltd.
S. Nagabhushana and B. Sathyanarayana, Lasers and Optical Instrumentation, 2010, I.K.
International Publishing House Pvt. Ltd.
R. Shevgaonkar, Electromagnetic Waves, 2005, 1st Edition, Tata McGraw Hill.
Principles of Electromagnetics, Matthew N.O. Sadiku, 2010, Fourth Edition, Oxford.
Ajoy Ghatak and K. Thyagarajan, Introduction to Fiber Optics, 2010, Cambridge University Press.

Mode of Evaluation: Quizzes, Digital Assignments, CAT-I and II and FAT

List of Challenging Experiments (Indicative)

1. Determination of Planck’s constant using electrolumine scence process 2hrs
2. Electron diffraction 2 hrs
3. Determination of wave length of laser source (He-Ne laser and diodelasers of 2 hrs
Different wave lengths) using diffraction technique
4. Determination of size of fine particle using laser diffraction 2 hrs

B.TECH. (BCL) Page 48

 5. Determination of the track width (periodicity) in a written CD 2 hrs
6. Optical Fiber communication (source + optical fiber + detector) 2 hrs
7. Analysis of crystallite size and strain in a nano-crystalline film using X-ray 2 hrs
diffraction
8. Numerical solutions of Schröding er equation (e.g. particle in a box problem) 2 hrs
(can be given as an assignment)
9. Laser coherence length measurement 2 hrs
10. Proof for transverse nature of E.M. waves 2 hrs
11. Quantum confinement and Heisenberg's uncertainty principle 2 hrs
12. Determination of angle of prism and refractive index for various colour – 2 hrs
Spectrometer
13. Determination of divergence of a laser beam 2 hrs
14. Determination of crystalline size for nanomaterial (Computer simulation) 2 hrs
15. Demonstration of phase velocity and group velocity (Computer simulation) 2 hrs

Total Laboratory Hours 30 hours

Mode of assessment: CAT / FAT

Recommended by Board of Studies 04.06.2019

Approved by Academic Council 55th ACM Date 13.06.2019

B.TECH. (BCL) Page 49

 L T P J C
PHY1901 INTRODUCTION TO INNOVATIVE PROJECTS
1 0 0 0 1

Syllabus version
Pre-requisite Nil
1.0

Course Objectives:
This course is offered to the students in the 1st Year of B. Tech. in order to orient them towards
independent, systemic thinking and be innovative.
1. To make students confident enough to handle the day to day issues.
2.To develop the “Thinking Skill” of the students, especially Creative Thinking Skills
3.To train the students to be innovative in all their activities
4.To prepare a project report on a socially relevant theme as a solution to the existing issues
Expected Course Outcome:
1. To understand the various types of thinking skills.
2. To enhance the innovative and creative ideas.
3. To find out a suitable solution for socially relevant issues-J component

Module: 1A Self Confidence 1hour

Understanding self– Johari Window–SWOT Analysis– Self Esteem– Being a contributor – Case
Study
Project : Exploring self, understanding surrounding, thinking about how s(he) can be a contributor
for the society, Creating a big picture of being an innovator–writing a1000words imaginary
Autobiography of self–Topic “Mr. X–the great innovatorof2015” and upload. (non-contact hours)

Module: 1B Thinking Skill 1 hour

Thinking and Behaviour–Types of thinking–Concrete– Abstract, Convergent, Divergent, Creative,

Analytical, Sequential and Holistic thinking–ChunkingTriangle–Context Grid – Examples – Case
Study.
Project: Meeting atleast 50 people belonging to various strata of life and talk to them / make field
visits to identify a min. of 100 society related issues, problems for which they need solutions and
categories them and upload along with details of people met and lessons learnt.(4 non-contact hours)
Module: 1C Lateral Thinking Skill 1 hour
Blooms Taxonomy–HOTS–Out of the box thinking–deBono lateral thinking model–Examples
Project: Last weeks-incomplete portion to be done and uploaded
Module: 2A Creativity 1 hour
Creativity Models–Walla–Barrons–Koberg & Begnall–Examples
Project: Selecting 5 out of 100 issues identified for future work. Criteria based approach for
prioritisation, use of statistical tools& upload. (4 non-contact hours)

B.TECH. (BCL) Page 50

Module: 2B Brainstorming 1 hour
25 brainstorming techniques and examples
Project: Brainstorm and come out with as many solutions as possible for the top 5 issues identified &
upload. (4 non-contact hours)
Module: 3 Mind Mapping 1 hour
Mind Mapping techniques and guidelines. Drawing a mind map
Project: Using Mind Maps get another set of solutions for the next 5 issues (issue6–10).
(4 non-contact hours)
Module: 4A Systems thinking 1 hour
Systems Thinking essentials–examples–Counter Intuitive condemns
Project: Select 1 issue / problem for which the possiblesolutions are available with you. Apply
Systems Thinking process and pick up one solution [explanation should be given why the other
possible solutions have been left out]. Go back to the customer and assess the acceptability and
upload. (4 non-contact hours)
Module: 4B Design Thinking 1 hour
Design thinking process – Human element of design thinking– case study
Project: Apply design thinking to the selected solution; apply the engineering & scientific tinge to it.
Participate in “design week” celebrations upload the weeks learning outcome.
Module: 5A Innovation 1 hour
Difference between Creativity and Innovation–Examples of innovation–Being innovative.
Project: A literature searches on prototyping of your solution finalized. Prepare a prototype model or
process and upload. (4 non-contact hours)
Module: 5B Blocks for Innovation 1 hour
Identify Blocks for creativity and innovation – overcoming obstacles – Case Study
Project: Project presentation on problem identification, solution, innovations-expected results–Interim
review with PPT presentation. (4 non-contact hours)
Module: 5C Innovation Process 1 hour
Steps for Innovation–right climate for innovation
Project: Refining the project, based on the review report and uploading the text.
(4 non-contact hours)
Module: 6A Innovation in India 1 hour
Stories of 10 Indian innovations
Project: Making the project better with add ons. (4 non- contact hours)
Module: 6B JUGAAD Innovation 1 hour
Frugal and flexible approach to innovation-doing more with less Indian Examples
Project: Fine tuning the innovation project with JUGAAD principles and uploading (Credit for
JUGAAD implementation). (4 non-contact hours)
Module: 7A Innovation Project Proposal Presentation 1 hour
Project proposal contents, economic input, ROI–Template

B.TECH. (BCL) Page 51

 Project: Presentation of the innovative project proposal and upload. (4 non- contact hours)

Module: 8A Contemporary issue in Innovation 1 hour

Contemporary issue in Innovation
Project: Final project Presentation, Vivavoce Exam (4 non-contact hours)
Total Lecture hours 15 hours
Text Book(s)
1. How to have Creative Ideas, Edward debone, Vermil on publication, UK, 2007.
2. The Art of Innovation, Tom Kelley &Jonathan Littman, Profile Books Ltd., UK, 2008.
Reference Books
1. Creating Confidence, Meribeth Bonct, Kogan Page India Ltd., New Delhi, 2000.
2. Lateral Thinking Skills, Paul Sloane, Keogan Page India Ltd, New Delhi, 2008.
3. Indian Innovators, Akhat Agrawal, Jaico Books, Mumbai, 2015.
4. JUGAAD Innovation, Navi Radjou, Jaideep Prabhu, Simone Ahuja Random house India,
Noida, 2012.
Mode of Evaluation: CAT / Assignment / Quiz / FAT / Project / Seminar
Three reviews with weightage of 25 : 25 : 50 along with reports
Recommended by Board of Studies 15.12.2015
Approved by Academic Council 39th ACM Date 17.12.2015

B.TECH. (BCL) Page 52

 L T P J C
ESP1001 ESPAÑOL FUNDAMENTAL
2 0 0 0 2

Syllabus version
Pre-requisite Nil
v.
Course Objectives:
The course gives students the necessary background to:
1. Demonstrate Proficiency in reading, writing, and speaking in basic Spanish. Learning
vocabulary related to profession, education centres, day today activities, food, culture,
sports and hobby, family set up, workplace, market and classroom activities is essential.
2. Demonstrate the ability to describe things and will be able to translate into English and
vice versa.
3. Describe in simple terms (both in written and oral form) aspects of their background,
immediate environment and matters in areas of immediate need.
Expected Course Outcome:
The students will be able to
1. Remember greetings, giving personal details and Identify genders by using correct articles
2. Apply the correct use of SER, ESTAR and TENER verb for describing people, place and
things
3. Create opinion about time and weather conditions by knowing months, days and seasons in
Spanish
4. Create opinion about people and places by using regular verbs
5. Apply reflexive verbs for writing about daily routine and create small paragraphs about
hometown, best friend and family
Abecedario, Saludos y Datos personales: Origen, Nacionalidad,
Module: 1 3 hours
Profesión
Competencia Gramática: Vocales y Consonantes. Artículos definidos e indefinidos (Numero y
Genero).
Competencia Escrita: Saludos y Datos personales

Module: 2 Edad y posesión. Números (1-20) 3 hours

Competencia Gramática: Pronombres personales. Adjetivos. Los verbos SER y TENER.

Competencia Escrita: Escribe sobre mismo/a y los compañeros de la clase
Vocabulario de Mi habitación. Colores. Descripción de lugares y
Module: 3 5 hours
cosas
Competencia Gramática: Adjetivos posesivos. El uso del verbo ESTAR. Diferencia entre SER y
ESTAR.
Competencia Escrita: Mi habitación
Mi familia. Números (21-100). Direcciones. Expresar la hora. Los
Module: 4 5hours
meses del año.
Competencia Gramática: Frases preposicionales. Uso del HAY. La diferencia entre MUY y
MUCHO. Uso del verbo GUSTAR

B.TECH. (BCL) Page 53

 Competencia Escrita: Mi familia. Dar opiniones sobre tiempo

Expresar fechas y el tiempo. Dar opiniones sobre personas y

Module: 5 5 hours
lugares.
Competencia Gramática: Los verbos regulares (-AR, -ER, -IR) en el presente. Adjetivos
demostrativos.
Competencia Escrita: Mi mejor amigo/a. Expresar fechas. Traducción ingles a español y Español a
Ingles.

Module: 6 Describir el diario. Las actividades cotidianas. 3 hours

Competencia Gramática: Los Verbos y pronombres reflexivos. Los verbos pronominales con e /
ie, o / ue, e / i, u / ue.
Competencia Escrita: El horario. Traducción ingles a español y Español a Ingles.
Dar opiniones sobre comidas y bebidas. Decir lo que está haciendo.
Module: 7 4 hours
Describir mi ciudad y Ubicar los sitios en la ciudad.
Competencia Gramática: Los verbos irregulares. Estar + gerundio. Poder + Infinitivo.
Competencia Escrita: Conversación en un restaurante. Traducción ingles a español y Español a
Ingles. Mi ciudad natal. Mi Universidad. La clase. Mi fiesta favorita.

Module: 8 Guest Lectures / Native Speakers 2 hours

Total Lecture hours 30hours

Text Book(s)

1. Text Book: “Aula Internacional 1”, Jaime Corpas, Eva Garcia, Agustin Garmendia,
Carmen Soriano Goyal Publication; reprinted Edition, (2010)

Reference Books

1. “¡Acción Gramática!” Phil Turk and Mike Zollo, Hodder Murray, London 2006.
2. “Practice makes perfect: Spanish Vocabulary”, Dorothy Richmond, McGraw Hill
Contemporary, USA, 2012.
3. “Practice makes perfect: Basic Spanish”, Dorothy Richmond, McGraw Hill Contemporary,
USA 2009.
4. “Pasaporte A1 Foundation”, Matilde Cerrolaza Aragón, Óscar Cerrolaza Gili, Begoña
Llovet Barquero, Edelsa Grupo, España, 2010.
Recommended by Board of Studies 22.02.2016
Approved by Academic Council 41st ACM Date 17.06.2016

B.TECH. (BCL) Page 54

 L T P J C
ESP2001 ESPAÑOL INTERMEDIO
2 0 2 0 3

Syllabus version
Pre-requisite
v.

Course Objectives:

The course gives students the necessary background to:

1. Enable students to read, listen and communicate in Spanish in their day to day life.
2. Enable students to describe situations by using present, past and future tenses in Spanish.
3. Enable to develop the comprehension skill in Spanish language.

Expected Course Outcome:

The students will be able to

1. Create sentences in near future and future tenses and correctly using the prepositions like
POR and PARA
2. Create sentences in preteri to perfecto and correctly use the direct and indirect object
pronouns
3. Create sentences related to likes and dislikes and also give commands in formal and informal
way
4. Create sentences in past tense by using imperfect and idefinido forms and describe past events
5. Create conversations in Spanish at places like restaurants, hotels, Shops and Railway stations
6. Understand about different Spanish speaking countries and its culture and traditions.
Números (101 – 1 millón). Expresar los planes futuros. Los
Module: 1 7 hours
númerosordinales.
Competencia Gramática: Futuros cercanos (Ir+a+Infinitivo). Futuros (Verbos regulares e
irregulares).Uso del POR y PARA.
Competencia Escrita: Traducción ingles a español y español a Ingles.
Comprensión - Los textos y Videos
Module: 2 Las ropas, colores y tamaños. Costar, valer, descuentos y rebajas 8 hours
Competencia Gramática: Pronombres objetivos directos e indirectos. El verbo Gustar y Disgustar.
Competencia Escrita: Traducción ingles a español y español a Ingles. Comprensión - Los textos y
Videos
Module: 3 Escribir un Correo electrónico formal e informal. 7 hours
Competencia Gramática: Imperativos formales e informales. Pretérito perfecto.
Competencia Escrita: Traducción ingles a español y español a Ingles.
Comprensión - Los textos y Videos
Module: 4 Currículo Vitae. Presentarse en una entrevista informal. 6 hours
Competencia Gramática: Pretérito imperfecto. Pretérito indefinido.
Competencia Escrita: Traducción ingles a español y español a Ingles.
Comprensión - Los textos y Videos
B.TECH. (BCL) Page 55
Module: 5 Introducción personal, Expresar los planes futuros. 5 hours

Comprensión oral: Introducción personal, Expresar los planes futuros. ¿Qué vas a hacer en las
próximas vacaciones?
Comprensión auditiva: Las preguntas sobre un cuento auditivo. Relacionar el audio con las imágenes.
Las preguntas basadas en canciones.
Medio de transporte: Comprar y Reservar billetes.
Module: 6 Diálogos entre dos 5 hours
Comprensión oral: Diálogos entre dos (cliente y tendero de ropas, pasajero y empleado, en un
restaurante, Reservación de habitación en un hotel). Presentación en una entrevista.
Comprensión auditiva: Las preguntas basadas en canciones. Las preguntas basadas en diálogos.
Module: 7 Presentación de los países hispánicos. 5 hours
Comprensión oral: Dialogo entre un médico y paciente. Presentación de los países hispánicos.
Describir su infancia. Describir vacaciones últimas o las actividades de último fin de semana.
Comprensión auditiva: Rellenar los blancos del cuento en pasado. Las preguntas basadas en el
cuento. Las preguntas basadas en un anuncio

Module: 8 Guest Lectures / Native Speakers 2 hours

Total Lecture hours 45 hours

Text Book(s)
1. “Aula Internacional 1”, Jaime Corpas, Eva Garcia, Agustin Garmendia, Carmen Soriano
Goyal Publication; reprinted Edition, Delhi (2010)
Reference Books

1. “¡Acción Gramática!” Phil Turk and Mike Zollo, Hodder Murray, London 2006.
2. “Practice makes perfect: Spanish Vocabulary”, Dorothy Richmond, McGraw Hill
Contemporary, USA, 2012.
3. “Practice makes perfect: Basic Spanish”, Dorothy Richmond, McGraw Hill Contemporary,
USA 2009.
4. “Pasaporte A1 Foundation”, Matilde Cerrolaza Aragón, Óscar Cerrolaza Gili, Begoña Llovet
Barquero, Edelsa Grupo, España, 2010.

Recommended by Board of Studies 22.02.2016

Approved by Academic Council 41st ACM Date 17.06.2016

B.TECH. (BCL) Page 56

 L T P J C
FRE1001 FRANÇAIS QUOTIDIEN
2 0 0 0 2

Syllabus version
Pre-requisite NIL
1

Course Objectives:

The course gives students the necessary background to:

1. Learn the basics of French language and to communicate effectively in French in their
day to day life.
2. Achieve functional proficiency in listening, speaking, reading and writing
3. Recognize culture-specific perspectives and values embedded in French language.
Expected Course Outcome:
The students will be able to :
1. Identify in French language the daily life communicative situations via personal
pronouns, emphatic pronouns, salutations, negations and interrogations.
2. Communicate effectively in French language via regular / irregular verbs.
3. Demonstrate comprehension of the spoken / written language in translating simple
sentences.
4. Understand and demonstrate the comprehension of some particular new range of unseen
written materials
5. Demonstrate a clear understanding of the French culture through the language studied
Module: 1 Expressions simples 3 hours
Les Salutations, Les nombres (1-100), Les jours de la semaine, Les mois de l’année, Les
Pronoms Sujets, Les Pronoms Toniques, La conjugaison des verbes irréguliers- avoir / être / aller
/ venir / faire etc.
Savoir-faire pour: Saluer, Se présenter, Présenter quelqu’un, Etablir des contacts
Module: 2 La conjugaison des verbes réguliers 3 hours
La conjugaison des verbes réguliers, La conjugaison des verbes pronominaux, La Négation,
L’interrogation avec ‘Est-ce que ou sans Est-ce que’.
Savoir-faire pour:
Chercher un(e) correspondant(e), Demander des nouvelles d’une personne.
Module: 3 La Nationalité du Pays, L’article (défini/ indéfini), Les prépositions 6 hours
La Nationalité du Pays, L’article (défini/ indéfini), Les prépositions (à/en/au/aux/sur/dans/avec
etc.), L’article contracté, Les heures en français, L’adjectif (La Couleur, L’adjectif possessif,
L’adjectif démonstratif/ L’adjectif interrogatif (quel/quelles/quelle/quelles), L’accord des
adjectifs avec le nom, L’interrogation avec Comment/ Combien / Où etc.
Savoir-faire pour:
Poser des questions, Dire la date et les heures en français,

B.TECH. (BCL) Page 57

 Module: 4 La traduction simple 4 hours
La traduction simple :(français-anglais / anglais –français),
Savoir-faire pour :
Faire des achats, Comprendre un texte court, Demander et indiquer le chemin.
Module: 5 L’article Partitif, Mettez les phrases aux pluriels 5 hours
L’article Partitif, Mettez les phrases aux pluriels, Faites une phrase avec les mots donnés,
Trouvez les questions.
Savoir-faire pour :
Répondez aux questions générales en français, Exprimez les phrases données au Masculin ou au
Féminin, Associez les phrases.
Module: 6 Décrivez : 3 hours
Décrivez: La Famille / La Maison / L’université /Les Loisirs/ La Vie quotidienne etc.
Module: 7 Dialogue 4 hours
Dialogue:
1. Décrire une personne.
2. Des conversations à la cafeteria.
3. Des conversations avec les membres de la famille
4. Des dialogues entre les amis.
Module: 8 Guest lectures 2 hours

Guest lectures / Natives speakers

Total Lecture hours 30 hours

Text Book(s)
1. Fréquence jeunes-1, Méthode de français, G. Capelle et N.Gidon, Hachette, Paris,
2010.
2. Fréquence jeunes-1, Cahier d’exercices, G. Capelle et N.Gidon, Hachette, Paris, 2010.
Reference Books
1. CONNEXIONS 1, Méthode de français, Régine Mérieux, Yves Loiseau,Les Éditions
Didier, 2010.
2. CONNEXIONS 1, Le cahier d’exercices, Régine Mérieux, Yves Loiseau, Les Éditions
Didier, 2010.
3. ALTER EGO 1, Méthode de français, Annie Berthet, Catherine Hugo, Véronique M.
Kizirian, Béatrix Sampsonis, Monique Waendendries, Hachette livre Paris 2011.
4. ALTER EGO 1, Le cahier d’activités, Annie Berthet, Catherine Hugo, Béatrix
Sampsonis, Monique Waendendries, Hachette livre, Paris 2011.
Mode of Evaluation: CAT / Assignment / Quiz / Seminar / FAT
Recommended by Board of Studies 26.02.2016
Approved by Academic Council 41st ACM Date 17.06.2016

B.TECH. (BCL) Page 58

 L T P J C
FRE2001 FRANÇAIS PROGRESSIF
2 0 2 0 3

Syllabus version
Pre-requisite Français Quotidien
v.1

Course Objectives:

The course gives students the necessary background to:

1. Understand isolated sentences and frequently used expressions in relation to immediate
priority areas (personal or family information, shopping, close environment, work).
2. Communicate in simple and routine tasks requiring only a simple and direct exchange of
information on familiar and habitual topics.
3. Enable students to describe with simply means his training, his immediate environment and
evoke familiar and habitual subjects, evoke subjects that correspond to immediate needs.
Expected Course Outcome:
The students will be able to :
1. Understand expressions in French.
2. Create senteces by using frequent lexicon related to himself, his family, his close
environment (family, shopping, work, school, etc).
3. Understand simple, clear messages on internet, authentic documents.
4. Analyse predictable information in common documents, such as advertisements, flyers,
menus, schedules, simple personal letters.
5. Create simple and routine tasks.
6. Create simple and direct exchange of information on familiar activities and topics.
Module: 1 Expressions simples 8 hours

La vie quotidiennes - Le verbe pronominal - Le passé composé avec l’auxiliaire - avoir et être- le
passé récent : venir de + infinitif - Le comparatif - Le superlatif - Les mots interrogatifs (les trois
formes)
Savoir-faire pour : Faire des achats, faire des commandes dans un restaurant, poser des questions.

Module: 2 Les activitiés quotidiennes 6 hours

La vie privée et publique (Les achats, Les voyages, les transports-La nourriture, etc.) - Les lieux de
la ville - Les mots du savoir-vivre - Les pronoms indéfinis - Les pronoms démonstratifs - Les
pronoms compléments objets directs/ indirects - La formation du future simple et future proche
Savoir-faire pour : Réserver les billets pour le voyage, réserver les chambres dans un hôtel,
S’informer sur les lieux de la ville, indiquer la direction à un étranger.
Module: 3 Les activités de loisirs 7 hours
Les loisirs (sports/spectacles/activités) - Les moments de la journée, de l’année- La fête indienne
et française – Les goûts - L’impératif - La négation de l’impératif-La place du pronom à
l’impératif avec un verbe pronominal.
Savoir-faire pour : Parler de ses goûts, raconter les vacances, formuler des phrases plus
compliquées, Raconter les souvenirs de l’enfance, parler sur la tradition de son pays natal.

B.TECH. (BCL) Page 59

Module: 4 La Francophonie 7 hours

L’espace francophone - Première approche de la société française – La consommation alimentaire

– caractériser un objet – décrire une tenue - Le pronom relatif (qui/que/dont/où)
Savoir-faire pour :
Articles de la presse-Portrait d’une personne-Cartes et messages d’invitation, d’acceptation ou de
refus -Article de presse - rédaction d’un événement.

Module: 5 La culture française 5 hours

Parler de ses activités quotidiennes - les fêtes en France – Parler de sa famille – réserver un billet à
l’agence - la gastronomie française
Module: 6 La description 5 hours
Décrire physiquement une personne – les vacances – les achats – réserver une chambre dans un
hôtel – les plus grands français - raconter des évènements passés

Module: 7 S’exprimer 5 hours

Parler du climat - parcours francophone – placer une commande au restaurant –- la mode - parler
de son projet d’avenir.

Module: 8 Guest lectures 2 hours

Guest lectures / Natives speakers

Total Lecture hours 45 hours

Text Book(s)
1. Alter Ego 1, Méthode de français, Annie Berthet, Hachette, Paris 2010.
2. Alter Ego 1, Cahier d’exercices, Annie Berthet, Hachette, Paris 2010.
Reference Books
1. CONNEXIONS 1, Méthode de français, Régine Mérieux, Yves Loiseau, Les Éditions
Didier, 2010.
2. CONNEXIONS 1, Le cahier d’exercices, Régine Mérieux, Yves Loiseau, Les Éditions
Didier, 2010.
3. Fréquence jeunes-1, Méthode de français, G. Capelle et N. Gidon, Hachette, Paris, 2010.
Mode of Evaluation: CAT / Assignment / Quiz / Project / Seminar / FAT
Recommended by Board of Studies 26.02.2016
Approved by Academic Council 41st ACM Date 17.06.2016

B.TECH. (BCL) Page 60

 L T P J C
GER1001 GRUNDSTUFE DEUTSCH
2 0 0 0 2

Syllabus version
Pre-requisite Nil
v.1

Course Objectives:

The course gives students the necessary background to:

1. Demonstrate Proficiency in reading, writing, and speaking in basic German. Learning
vocabulary related to profession, education centres, day-to-day activities, food, culture, sports
and hobby, family set up, workplace, market and classroom activities are essential.
2. Make the students industry oriented and make them adapt in the German culture.
Expected Course Outcome:
The students will be able to
1. Remember greeting people, introducing oneself and understanding basic expressions in
German.
2. Understand basic grammar skills to use these in a meaning way.
3. Remember beginner's level vocabulary
4. Create sentences in German on a variety of topics with significant precision and in detail.
5. Apply good comprehension of written discourse in areas of special interests.
Module: 1 3 hours

Begrüssung, Landeskunde, Alphabet, Personal pronomen, Verben- heissen, kommen, wohnen, lernen,
Zahlen (1-100), W-Fragen, Aussagesätze, Nomen- Singular und Plural, der Artikel - Bestimmter-
Unbestimmter Artikel)
Lernziel :
Sich vorstellen, Grundlegendes Verständnis von Deutsch, Deutschland in Europa
Module: 2 3 hours
Konjugation der Verben (regelmässig /unregelmässig),das Jahr- Monate, Jahreszeiten und die Woche,
Hobbys, Berufe, Artikel, Zahlen (Hundert bis eine Million), Ja-/Nein- Frage, Imperativ mit ,,Sie’’
Lernziel:
Sätze schreiben, über Hobbys, Berufe erzählen, usw
Module: 3 5 hours
Possessiv pronomen, Negation, Kasus (Bestimmter- Unbestimmter Artikel) Trennbareverben,
Modalverben, Uhrzeit, Präpositionen, Lebensmittel, Getränkeund Essen, Farben, Tiere
Lernziel :
Sätze mit Modalverben, Verwendung von Artikel, Adjektiv beim Verb
Module: 4 5 hours
Übersetzung: (Deutsch – Englisch / Englisch – Deutsch)
Lernziel :
Die Übung von Grammatik und Wortschatz

B.TECH. (BCL) Page 61

Module: 5 5 hours
Leserverständnis. Mindmap machen, Korrespondenz- Briefe und Email
Lernziel:
Übung der Sprache, Wortschatzbildung
Module: 6 3 hours
Aufsätze : Die Familie, Bundesländer in Deutschland, Ein Fest in Deutschland,
Lernziel :
Aktiver, selbständiger Gebrauch der Sprache
Module: 7 4 hours
Dialoge:
a) Gespräche mit einem/einer Freund /Freundin.
b) Gespräche beim Einkaufen ; in einem Supermarkt ; in einer Buchhandlung ;
c) in einem Hotel - an der Rezeption ; ein Termin beim Arzt.
d) Ein Telefongespräch ; Einladung–Abendessen
Module: 8 2 hours
Guest Lectures / Native Speakers Einleitung in die deustche Kultur und Politik

Total Lecture hours 30 hours

Text Book(s)
1. Netzwerk Deutsch als Fremdsprache A1, Stefanie Dengler, Paul Rusch, Helen Schmtiz, Tanja
Sieber, Klett-Langenscheidt Verlag, München : 2013
Reference Books
Lagune, Hartmut Aufderstrasse, Jutta Müller, Thomas Storz, 2012.
Deutsche Sprachlehre für Ausländer, Heinz Griesbach, Dora Schulz, 2013.
Studio d A1, Hermann Funk, Christina Kuhn, CorneslenVerlag, Berlin: 2010.
Tangram Aktuell-I, Maria-Rosa, SchoenherrTil, Max Hueber Verlag, Muenchen: 2012.
www.goethe.de
wirtschaftsdeutsch.de
hueber.de
klett-sprachen.de
www.deutschtraning.org
Mode of Evaluation: CAT / Assignment / Quiz / Seminar / FAT
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 41st ACM Date 17.06.2016

B.TECH. (BCL) Page 62

 L T P J C
GER2001 MITTELSTUFE DEUTSCH
2 0 2 0 3

Syllabus version
Pre-requisite Grundstufe Deutsch
v.1
Course Objectives:
The course gives students the necessary background to:
1. Improve the communication skills in German language
2. Improve the listening and understanding capability of German FM Radio, and TV
Programmes, Films
3. Build the confidence of the usage of German language and better understanding of the
culture
Expected Course Outcome:
The students will be able to
1. Create proficiency in advanced grammar and rules
2. Understand the texts including scientific subjects.
3. Create the ability of listening and speaking in real time situations.
4. Create the vocabulary in different context-based situations.
5. Create written communication in profession life, like replying or sending E-mails and
letters in a company.
6. Create communication related to simple and routine tasks.
Module: 1 Proficiency in Advanced Grammar 8 hours
Grammatik : Tempus- Perfekt, Präteritum, Plusquamperfekt, Futur-I, Futur-II, Wiederholung der
Grundstufen grammatik
Lernziel: Sätzeschreiben in verschiedenen Zeiten.
Module: 2 Understanding of Technical Texts 6 hours
Grammatik : Passiv, Personalpronomen (Nominativ, Akkusativ, Dativ)
Lernziel: Passiv, Formen des Personal pronomens
Module: 3 Understanding of Scientific texts 7 hours
Adjektivdeklination, Nebensatz, Präpositionen mit Akkusativ und Dativ, Infinitiv Sätze
Lernziel: Verbindung zwischen Adjektiv beim Nomen
Module: 4 Communicating in Real Time Situations 7 hours
Übersetzung: Technische Terminologie, wissenschaftliche, literarische Texte aus dem Deutschen
ins Englische und umgekehrt,
Lernziel : Übung von Grammatik und Wortschatz
Module: 5 Acquisition of the Vocabulary of the advanced Level 5 hours
Hörverständnis durch Audioübung :Familie, Leben in Deutschland, Am Bahnhof,
Videos : Politik, Historie, Tagesablauf in eineranderen Stadt,
Lernziel : Übung der Sprache

B.TECH. (BCL) Page 63

Module: 6 Ability to Communicate in Professional Life 5 hours
Hörverständnis durch Audioübung: Überberühmte Persönlichkeiten, Feste in Deutschland,
Videos: Wetter, An der Universität,ein Zimmer buchen, Studentenleben,Städteund Landeskunde
Lernziel: Hörverständnis, Landeskunde
Module: 7 Ability to Communicate in Task-based Situations 5 hours
Hörverständnis durch Audioübung: FM Radio aus Deutschland
Videos: Fernseher aus Deutschland
Lernziel: LSRW Fähigkeiten
Module: 8 Invited Talk: Contemporary issues 2 hours
Total Lecture hours 45 hours
Text Book(s)
1. Tangram Aktuell II, Rosa Maria Dallapizza, Beate Blüggel, Max Hueber Verlag,
München : 2010
Reference Books

1. Themen Aktuell, Heiko Bock, Mueller Jutta, Max Hueber Verla, Muenchen : 2010.
2. Deutsch Sprachlehre fuer Auslaender, Schulz Griesbach, Max Hueber Verlag,
Muenchen : 2012.
3. Lagune, Deutsch als Fremdsprache, Jutta Müller, Storz Thomas, Hueber Verlag,
Ismaning : 2013.
4. Studio d A1, Hermann Funk, Christina Kuhn, Max Huerber Verlag, München : 2011
Mode of Evaluation: CAT / Assignment / Quiz / Seminar / FAT
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 41stACM Date 17.06.2016

B.TECH. (BCL) Page 64

 JAP1001 L T P J C
JAPANESE FOR BEGINNERS
For UG
2 0 0 0 2
Programes
Syllabus version
Pre-requisite Nil
1
Course Objectives:
The course gives students the necessary background to:
1. Develop four basic skills related to reading, listening, speaking and writing Japanese language.
2. Instill in learners an interest in Japanese language by teaching them culture and general
etiquettes.
3. Recognize, read and write Hiragana and Katakana.
Expected Course Outcomes:
Students will be able to:
1. Remember Japanese alphabets and greet in Japanese.
2. Understand pronouns, verbs form, adjectives and conjunctions in Japanese.
3. Remember time and dates related vocabularies and express them in Japanese.
4. Create simple questions and its answers in Japanese.
5. Understand the Japanese culture and etiquettes.
Module: 1 Introduction to Japanese syllables and Greetings 4 hours
Introduction of Japanese language, alphabets; Hiragana, katakana, and Kanji Pronunciation, vowels
and consonants. Hiragana – writing and reading; Vocabulary: 50 Nouns and 20 pronouns, Greetings.
Module: 2 Demonstrative Pronouns 4 hours
Grammar: N1 wa N2 desu, Japanese Numerals, Demonstrative pronoun - Kore, Sore, Are and Dore
(This, That, Over there, which) Kono, sono, Ano and Dono (this, that, over there, which) Kochira,
Sochira, Achira and Dochira. this way....) Koko, Soko, Asoko and Doko (Here, There…. location)
Module: 3 Verbs and Sentence formation 4 hours
Classification of verbs Be verb desu Present and Present negative Basic structure of sentence (Subject+
Object+ Verb) Katakana-reading and writing
Module: 4 Conjunction and Adjectives 4 hours
Conjunction‐Ya…..nado Classification of Adjectives ‘I’ and ‘na’‐ending Set phrase – One gaishimasu
– Sumimasen, wakarimasen Particle –Wa, Particle‐Ni ‘Ga imasu’ and ‘Ga arimasu’ for Existence of
living things and non-living things Particle‐ Ka, Ni, Ga
Module: 5 Vocabulary and its Meaning 4 hours
Days / Months / Year / Week (Current, Previous, Next, Next to Next) ; Nation, People and Language
Relationship of family (look and learn); Simple kanji recognition
Module: 6 Forming questions and giving answers 4 hours
Classification of Question words (Dare, Nani, Itsu, Doyatte, dooshite, Ikutsu, Ikura); Classification of
Te forms, Polite form of verbs

B.TECH. (BCL) Page 65

Module: 7 Expressing time, position and directions 4 hours
Classification of question words (Doko, Dore, Dono, Dochira); Time expressions (Jikan), Number of
hours, Number of months, calendar of a month; Visit the departmental store, railway stations, Hospital
(Byoki), office and University
Module: 8 Guest Lecture by Experts 2 hours
Total Lecture hours 30 hours
Text Book(s):
1. The Japan Foundation (2017), Marugo to Japanese Language and Culture Starter A1 Course
book For Communicative Language Competences, New Delhi: Goyal Publishers
(9788183078047).
2. Banno, Eri et al (2011), Genki: An Integrated Course in Elementary Japanese I [Second
Edition], Japan: The Japan Times.
Reference Book(s):
1. Japanese for Busy people (2011) video CD, AJALT, Japan.
2. Carol and Nobuo Akiyama (2010), The Fast and Fun Way, New Delhi: Barron's Publication
Mode of Evaluation: CAT , Quiz and Digital Assignments
Recommended by Board of Studies 24.10.2018
Approved by Academic Council 53rd ACM Date 13.12.2018

B.TECH. (BCL) Page 66

 L T P J C
STS1001 INTRODUCTION TO SOFT SKILLS
3 0 0 0 1
Syllabus version
Pre-requisite None
1
Course Objectives:
1. To enhance the ability to plan better and work as a team effectively
2. To boost the learning ability and to acquire analytical and research skills
3. To educate the habits required to achieve success
Expected Course Outcome:
1. Enabling students to know themselves and interact better with self and environment
Module: 1 Lessons on excellence 10 hours
Ethics and integrity
Importance of ethics in life, Intuitionism vs Consequentialism, Non-consequentialism, Virtue
ethics vs situation ethics, Integrity - listen to conscience, Stand up for what is right
Change management
Who moved my cheese?, Tolerance of change and uncertainty, Joining the bandwagon, Adapting
change for growth - overcoming inhibition
How to pick up skills faster?
Knowledge vs skill, Skill introspection, Skill acquisition, "10,000 hours rule" and the converse
Habit formation
Know your habits, How habits work? - The scientific approach, How habits work? - The
psychological approach, Habits and professional success, "The Habit Loop", Domino effect,
Unlearning a bad habit
Analytic and research skills.
Focused and targeted information seeking, How to make Google work for you, Data assimilation
Module: 2 Team skills 11 hours
Goal setting
SMART goals, Action plans, Obstacles -Failure management
Motivation
Rewards and other motivational factors, Maslow's hierarchy of needs, Internal and external
motivation
Facilitation
Planning and sequencing, Challenge by choice, Full Value Contract (FVC), Experiential learning
cycle, Facilitating the Debrief
Introspection
Identify your USP, Recognize your strengths and weakness, Nurture strengths, Fixing weakness,
Overcoming your complex, Confidence building
Trust and collaboration
Virtual Team building, Flexibility, Delegating, Shouldering responsibilities

B.TECH. (BCL) Page 67

Module: 3 Emotional Intelligence 12 hours
Transactional Analysis
Introduction, Contracting, Ego states, Life positions
Brain storming
Individual Brainstorming, Group Brainstorming, Stepladder Technique, Brain writing, Crawford's
Slip writing approach, Reverse brainstorming, Star bursting, Charlette procedure, Round robin
brainstorming
Psychometric Analysis
Skill Test, Personality Test
Rebus Puzzles/Problem Solving
More than one answer, Unique ways
Module: 4 Adaptability 12 hours
Theatrix
Motion Picture, Drama, Role Play, Different kinds of expressions
Creative expression
Writing, Graphic Arts, Music, Art and Dance
Flexibility of thought
The 5'P' framework (Profiling, prioritizing, problem analysis, problem solving, planning)
Adapt to changes(tolerance of change and uncertainty)
Adaptability Curve , Survivor syndrome
Total Lecture hours 45 hours
Text Book(s)
1. Chip Heath, How to Change Things When Change Is Hard (Hardcover), 2010, First
Edition, Crown Business.
2. Karen Kindrachuk, Introspection, 2010, 1st Edition.
3. Karen Hough, the Improvisation Edge: Secrets to Building Trust and Radical
Collaboration at Work, 2011, Berrett-Koehler Publishers.
Reference Books
1. Gideon Mellenbergh, A Conceptual Introduction to Psychometrics: Development, Analysis
and Application of Psychological and Educational Tests, 2011, Boom Eleven International.
2. Phil Lapworth, An Introduction to Transactional Analysis, 2011, Sage Publications (CA)
Mode of Evaluation: FAT, Assignments, Projects, Case studies, Role plays, 3 Assessments with
Term End FAT (Computer Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 68

 L T P J C
INTRODUCTION TO BUSINESS
STS1002
COMMUNICATION
3 0 0 0 1

Syllabus version
Pre-requisite None
2

Course Objectives:
1. To provide an overview of Prerequisites to Business Communication
2. To enhance the problem solving skills and improve the basic mathematical skills
3. To organize the thoughts and develop effective writing skills
Expected Course Outcome:
1. Enabling students enhance knowledge of relevant topics and evaluate the information

Module: 1 Study skills 10 hours

Memory techniques
Relation between memory and brain, Story line technique, Learning by mistake, Image-name
association, Sharing knowledge, Visualization
Concept map
Mind Map, Algorithm Mapping, Top down and Bottom Up Approach
Time management skills
Prioritization - Time Busters, Procrastination, Scheduling, Multitasking, Monitoring
Working under pressure and adhering to deadlines
Module: 2 Emotional Intelligence (Self Esteem ) 6 hours
Empathy
Affective Empathy and Cognitive Empathy
Sympathy
Level of sympathy (Spatial proximity, Social Proximity, Compassion fatigue)
Module: 3 Business Etiquette 9 hours
Social and Cultural Etiquette
Value, Manners, Customs, Language, Tradition
Writing Company Blogs
Building a blog, Developing brand message, FAQs', Assessing Competition
Internal Communications
Open and objective Communication, Two way dialogue, Understanding the audience
Planning
Identifying, Gathering Information, Analysis, Determining, Selecting plan, Progress check, Types of
planning
Writing press release and meeting notes
Write a short, catchy headline, Get to the Point –summarize your subject in the first paragraph,
Body – Make it relevant to your audience
Module: 4 Quantitative Ability 4 hours
Numeracy concepts
Fractions, Decimals, Bodmas, Simplifications, HCF, LCM, Tests of divisibility
B.TECH. (BCL) Page 69
Beginning to Think without Ink
Problems solving using techniques such as: Percentage, Proportionality, Support of answer choices,
Substitution of convenient values, Bottom-up approach etc.
Math Magic
Puzzles and brain teasers involving mathematical concepts
Speed Calculations
Square roots, Cube roots, Squaring numbers, Vedic maths techniques
Module: 5 Reasoning Ability 3 hours
Interpreting Diagramming and sequencing information
Picture analogy, Odd picture, Picture sequence, Picture formation, Mirror image and water image
Logical Links
Logic based questions-based on numbers and alphabets
Module: 6 Verbal Ability 3 hours
Strengthening Grammar Fundamentals
Parts of speech, Tenses, Verbs( Gerunds and infinitives)
Reinforcements of Grammar concepts
Subject Verb Agreement, Active and Passive Voice, Reported Speech
Module: 7 Communication and Attitude 10 hours
Writing
Writing formal & informal letters, How to write a blog & knowing the format, Effective ways of
writing a blog, How to write an articles & knowing the format, Effective ways of writing an articles,
Designing a brochures
Speaking skills
How to present a JAM, Public speaking
Self managing
Concepts of self management and self motivation, Greet and Know, Choice of words, Giving
feedback, Taking criticism
Total Lecture hours 45 hours
Text Book(s)
1. FACE, Aptipedia, Aptitude Encyclopedia, 2016, First Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, First Edition, McGraw-Hill Education Pvt. Ltd.

Reference Books
1. Alan Bond and Nancy Schuman, 300+ Successful Business Letters for All Occasions, 2010,
Third Edition, Barron’s Educational Series, New York.
2. Josh Kaufman, The First 20 Hours: How to Learn Anything ... Fast , 2014, First Edition,
Penguin Books, USA.
Mode of Evaluation: FAT, Assignments, Projects, Case studies, Role plays,
3 Assessments with Term End FAT (Computer Based Test)
Recommended by Board of Studies 09.06.2017

Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 70

 L T P J C
STS2001 REASONING SKILL ENHANCEMENT
3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To strengthen the social network by the effective use of social media and social interactions.
2. To identify own true potential and build a very good personal branding
3. To enhance the Analytical and reasoning skills.
Expected Course Outcome:
1. Understanding the various strategies of conflict resolution among peers and supervisors and
respond appropriately
Module: 1 Social Interaction and Social Media 6 hours
Effective use of social media
Types of social media, Moderating personal information, Social media for job/profession,
Communicating diplomatically
Networking on social media
Maximizing network with social media, How to advertise on social media
Event management
Event management methods, Effective techniques for better event management
Influencing
How to win friends and influence people, Building relationships, Persistence and resilience,
Tools for talking when stakes are high
Conflict resolution
Definition and strategies, Styles of conflict resolution
Module: 2 Non Verbal Communication 6 hours
Proximecs
Types of proximecs, Rapport building
Reports and Data Transcoding
Types of reports
Negotiation Skill
Effective negotiation strategies
Conflict Resolution
Types of conflicts
Module: 3 Interpersonal Skill 8 hours
Social Interaction
Interpersonal Communication, Peer Communication, Bonding, Types of social interaction
Responsibility
Types of responsibilities, Moral and personal responsibilities
Networking
Competition, Collaboration, Content sharing
Personal Branding
Image Building, Grooming, Using social media for branding
B.TECH. (BCL) Page 71
Delegation and compliance
Assignment and responsibility, Grant of authority, Creation of accountability
Module: 4 Quantitative Ability 10 hours
Number properties
Number of factors, Factorials, Remainder Theorem, Unit digit position, Tens digit position
Averages
Averages, Weighted Average
Progressions
Arithmetic Progression, Geometric Progression, Harmonic Progression
Percentages
Increase & Decrease or successive increase
Ratios
Types of ratios and proportions
Module: 5 Reasoning Ability 8 hours
Analytical Reasoning
Data Arrangement (Linear and circular & Cross Variable Relationship), Blood Relations, Ordering /
ranking / grouping, Puzzletest, Selection Decision table
Module: 6 Verbal Ability 7 hours
Vocabulary Building
Synonyms & Antonyms, One word substitutes, Word Pairs, Spellings, Idioms, Sentence completion,
Analogies
Total Lecture hours 45 hours

Text Book(s)
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, First Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, First Edition, McGraw-Hill Education Pvt. Ltd.
3. Mark G. Frank, David Matsumoto, Hyi Sung Hwang, Nonverbal Communication:
Science and Applications, 2012, 1st Edition, Sage Publications, New York.
Reference Books
1. Arun Sharma, Quantitative aptitude, 2016, 7th edition, Mcgraw Hill Education Pvt. Ltd.
2. Kerry Patterson, Joseph Grenny, Ron McMillan, Al Switzler, Crucial Conversations: Tools
for Talking When Stakes are High, 2001, 1st edition McGraw Hill Contemporary, Bangalore.
3. Dale Carnegie, How to Win Friends and Influence People, Latest Edition,2016. Gallery
Books, New York.
Mode of evaluation: FAT, Assignments, Projects, Case studies, Role plays,
3 Assessments with Term End FAT (Computer Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 72

 L T P J C
STS2002 INTRODUCTION TO ETIQUETTE
3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To analyze social psychological phenomena in terms of impression management.
2. To control or influence other people's perceptions.
3. To enhance the problem solving skills
Expected Course Outcome:
Creating in the students an understanding of decision making models and generating alternatives
using appropriate expressions.
Module: 1 Impression Management 8 hours
Types and techniques
Importance of impression management, Types of impression management, Techniques and case
studies, Making a good first impression in an interview (TEDOS technique) , How to recover from a
bad impressions/experience, Making a good first impression online
Non-verbal communication and body language
Dressing, Appearance and Grooming, Facial expression and Gestures, Body language (Kinesics),
Keywords to be used, Voice elements (tone, pitch and pace)
Module: 2 Thinking Skills 4 hours
Introduction to problem solving process
Steps to solve the problem, Simplex process
Introduction to decision making and decision making process
Steps involved from identification to implementation, Decision making model
Module: 3 Beyond Structure 4 hours
Art of questioning
How to frame questions, Blooms questioning pyramid, Purpose of questions
Etiquette
Business, Telephone etiquette, Cafeteria etiquette, Elevator etiquette, Email etiquette, Social media
etiquette
Module: 4 Quantitative Ability 9 hours
Profit and Loss
Cost Price & Selling Price, Margins & Markup
Interest Calculations
Simple Interest, Compound Interest, Recurring
Mixtures and solutions
Ratio & Averages, Proportions
Time and Work
Pipes & Cisterns, Man Day concept, Division Wages
Time Speed and Distance

B.TECH. (BCL) Page 73

Average speed, Relative speed, Boats and streams.
Proportions & Variations
Module: 5 Reasoning Ability 11 hours
Logical Reasoning
Sequence and series, Coding and decoding, Directions
Visual Reasoning
Abstract Reasoning, Input Type Diagrammatic Reasoning, Spatial reasoning, Cubes
Data Analysis And Interpretation
DI-Tables / Charts / Text
Module: 6 Verbal Ability 9 hours
Grammar
Spot the Errors, Sentence Correction, Gap Filling Exercise, Sentence Improvisations, Misc.
Grammar Exercise
Total Lecture hours 45 hours

Text Book(s)

1. Micheal Kallet, Think Smarter: Critical Thinking to Improve Problem-Solving and

Decision-Making Skills, April 7, 2014, 1st Edition, Wiley, New Jersey.
2. MK Sehgal, Business Communication, 2008, 1st Edition, Excel Books, India.
3. FACE, Aptipedia Aptitude Encyclopedia, 2016, First Edition, Wiley Publications, Delhi.
4. ETHNUS, Aptimithra, 2013, First edition, McGraw-Hill Education Pvt. Ltd., Bangalore.
Reference Books
1. Andrew J. DuBrin, Impression Management in the Workplace: Research, Theory and
Practice, 2010, 1st edition, Routledge.
2. Arun Sharma, Manorama Sharma, Quantitative aptitude, 2016, 7th edition, McGraw Hill
Education Pvt. Ltd, Banglore.
3. M. Neil Browne, Stuart M. Keeley, Asking the right questions, 2014, 11th Edition, Pearson,
London.
Mode of Evaluation: FAT, Assignments, Projects, Case studies, Role plays,
3 Assessments with Term End FAT (Computer Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 74

 GETTING STARTED TO SKILL L T P J C
STS2101
ENHANCEMENT 3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. To develop the students’ logical thinking skills and apply it in the real-life scenarios
2. To learn the strategies of solving quantitative ability problems
3. To enrich the verbal ability of the students
Expected Course Outcome:
1. Students will be able to demonstrate critical thinking skills, such as problem solving
related to their subject matters
2. Students will be able to demonstrate competency in verbal, quantitative and reasoning
aptitude
3. Students will be able to perform good written communication skills

Module: 1 Logical Reasoning 11 hours

Clocks, calendars, Direction sense and Cubes
• Clocks
• Calendars
• Direction Sense
• Cubes

Data interpretation and Data sufficiency

• Data Interpretation – Tables
• Data Interpretation - Pie Chart
• Data Interpretation - Bar Graph
• Data Sufficiency
Module: 2 Quantitative Aptitude 18 hours
Time and work
• Work with different efficiencies
• Pipes and cisterns
• Work equivalence
• Division of wages

Time, Speed and Distance

• Basics of time, speed and distance
• Relative speed
• Problems based on trains
• Problems based on boats and streams
• Problems based on races

B.TECH. (BCL) Page 75

Profit and loss, Partnerships and averages
• Basic terminologies in profit and loss
• Partnership
• Averages
• Weighted average
Module: 3 Verbal Ability 13 hours
Sentence Correction
• Subject-Verb Agreement
• Modifiers
• Parallelism
• Pronoun-Antecedent Agreement
• Verb Time Sequences
• Comparisons
• Prepositions
• Determiners

Sentence Completion and Para-jumbles

• Pro-active thinking
• Reactive thinking (signpost words, root words, prefix suffix, sentence structure clues)
• Fixed jumbles
• Anchored jumbles
Module: 4 Writing skills for placements 3 hours
Essay writing
• Idea generation for topics
• Best practices
• Practice and feedback

Total Lecture hours 45 hours

Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer
Based Test)
Text Book(s):
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1st Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1st Edition, McGraw-Hill Education Pvt. Ltd.
3. SMART, Place Mentor, 2018, 1st Edition, Oxford University Press.
4. R S Aggarwal, Quantitative Aptitude for Competitive Examinations, 2017, 3rd Edition,
S. Chand Publishing, Delhi.
Reference Book(s):
1. Arun Sharma, Quantitative Aptitude, 2016, 7th Edition, McGraw Hill Education Pvt.
Ltd.

B.TECH. (BCL) Page 76

 L T P J C
STS2102 ENHANCING PROBLEM SOLVING SKILLS
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0

Course Objectives:

1. To develop the students’ logical thinking skills and apply it in the real-life scenarios
2. To learn the strategies of solving quantitative ability problems
3. To enrich the verbal ability of the students
4. To strengthen the basic programming skills for placements

Expected Course Outcome:

1. The students will be able to interact confidently and use decision making models
effectively
2. The students will be able to deliver impactful presentations
3. The students will be able to be proficient in solving quantitative aptitude and verbal
ability questions effortlessly
Module: 1 Logical Reasoning 5 hours
Logical connectives, Syllogism and Venn diagrams
• Logical Connectives
• Syllogisms
• Venn Diagrams – Interpretation
Venn Diagrams – Solving
Module: 2 Quantitative Aptitude 11 hours
Logarithms, Progressions, Geometry and Quadratic equations
• Logarithm
• Arithmetic Progression
• Geometric Progression
• Geometry
• Mensuration
• Coded inequalities
• Quadratic Equations

Permutation, Combination and Probability

• Fundamental Counting Principle
• Permutation and Combination
• Computation of Permutation
• Circular Permutations
• Computation of Combination
• Probability
Module: 3 Verbal Ability 4 hours
Critical Reasoning
• Argument – Identifying the Different Parts (Premise, assumption, conclusion)
B.TECH. (BCL) Page 77
 • Strengthening statement
• Weakening statement
• Mimic the pattern
Module: 4 Recruitment Essentials 7 hours
Cracking interviews - demonstration through a few mocks
Sample mock interviews to demonstrate how to crack the:
• HR interview
• MR interview
• Technical interview

Cracking other kinds of interviews

• Skype/ Telephonic interviews
• Panel interviews
• Stress interviews

Resume building – workshop

A workshop to make students write an accurate resume

Module: 5 Problem solving and Algorithmic skills 18 hours

• Logical methods to solve problem statements in Programming

• Basic algorithms introduced
Total Lecture hours 45 hours
Mode of Evaluation: FAT, Assignments, Mock interviews, 3 Assessments with Term End FAT
(Computer Based Test)
Text Book(s):
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1stEdition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1st Edition, McGraw-Hill Education Pvt. Ltd.
3. SMART, Place Mentor, 2018, 1st Edition, Oxford University Press.
4. R S Aggarwal, Quantitative Aptitude for Competitive Examinations, 2017, 3rd Edition, S.
Chand Publishing, Delhi.
Reference Book(s):

1. Arun Sharma, Quantitative Aptitude, 2016, 7th Edition, McGraw Hill Education Pvt. Ltd.

B.TECH. (BCL) Page 78

 NUMERICAL ABILITY AND COGNITIVE L T P J C
STS2201
INTELLIGENCE 3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. To develop the students’ logical thinking skills and apply it in the real-life scenarios
2. To learn the strategies of solving quantitative ability problems
3. To enrich the verbal ability of the students

Expected Course Outcome:

1. Students will be able to demonstrate critical thinking skills, such as problem solving
related to their subject matters
2. Students will be able to demonstrate competency in verbal, quantitative and reasoning
aptitude
3. Students will be able to perform good written communication skills

Module: 1 Logical Reasoning 10 hours

Clocks, calendars, Direction sense and Cubes
• Clocks
• Calendars
• Direction Sense
• Cubes
Practice on advanced problems

Data interpretation and Data sufficiency - Advanced

• Advanced Data Interpretation and Data Sufficiency questions of CAT level
• Multiple chart problems
• Caselet problems
Module: 2 Quantitative Aptitude 19 hours
Time and work – Advanced
• Work with different efficiencies
• Pipes and cisterns: Multiple pipe problems
• Work equivalence
• Division of wages
• Advanced application problems with complexity in calculating total work

Time, Speed and Distance - Advanced

• Relative speed
• Advanced Problems based on trains
• Advanced Problems based on boats and streams
• Advanced Problems based on races

Profit and loss, Partnerships and averages - Advanced

• Partnership
• Averages
B.TECH. (BCL) Page 79
 • Weighted average
Advanced problems discussed

Number system - Advanced

Advanced application problems on Numbers involving HCF, LCM, divisibility tests, remainder
and power cycles.

Module: 3 Verbal Ability 13 hours

Sentence Correction - Advanced

• Subject-Verb Agreement
• Modifiers
• Parallelism
• Pronoun-Antecedent Agreement
• Verb Time Sequences
• Comparisons
• Prepositions
• Determiners
Quick introduction to 8 types of errors followed by exposure to GMAT level questions
Sentence Completion and Para-jumbles - Advanced
• Pro-active thinking
• Reactive thinking (signpost words, root words, prefix suffix, sentence structure clues)
• Fixed jumbles
• Anchored jumbles
Practice on advanced GRE/ GMAT level questions
Reading Comprehension – Advanced
Exposure to difficult foreign subject-based RCs of the level of GRE/ GMAT

Module: 4 Writing skills for placements 3 hours

Essay writing
• Idea generation for topics
• Best practices
• Practice and feedback
Total Lecture hours 45 hours
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer
Based Test)
Text Book(s):
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1stEdition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1stEdition, McGraw-Hill Education Pvt. Ltd.
3. SMART, Place Mentor, 2018, 1st Edition, Oxford University Press.
4. R S Aggarwal, Quantitative Aptitude For Competitive Examinations, 2017, 3rd Edition,
S. Chand Publishing, Delhi.
Reference Book(s):
1. Arun Sharma, Quantitative Aptitude, 2016, 7th Edition, McGraw Hill Education Pvt.
Ltd.

B.TECH. (BCL) Page 80

 ADVANCED APTITUDE AND REASONING L T P J C
STS2202
SKILLS 3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. To develop the students’ logical thinking skills and apply it in the real-life scenarios
2. To learn the strategies of solving quantitative ability problems
3. To enrich the verbal ability of the students
4. To strengthen the basic programming skills for placements
Expected Course Outcome:
1. The students will be able to interact confidently and use decision making models
effectively
2. The students will be able to deliver impactful presentations
3. The students will be able to be proficient in solving quantitative aptitude and verbal
ability questions effortlessly
Module: 1 Logical Reasoning 4 hours
Logical Reasoning puzzles - Advanced
Advanced puzzles:
4. Sudoku
5. Mind-bender style word statement puzzles
6. Anagrams
7. Rebus puzzles

Logical connectives, Syllogism and Venn diagrams

1. Logical Connectives
2. Advanced Syllogisms - 4, 5, 6 and other multiple statement problems
3. Challenging Venn Diagram questions: Set theory
Module: 2 Quantitative Aptitude 10 hours
Logarithms, Progressions, Geometry and Quadratic equations - Advanced
1. Logarithm
2. Arithmetic Progression
3. Geometric Progression
4. Geometry
5. Mensuration
6. Coded inequalities
7. Quadratic Equations
Concepts followed by advanced questions of CAT level

Permutation, Combination and Probability - Advanced

• Fundamental Counting Principle
• Permutation and Combination
• Computation of Permutation - Advanced problems
• Circular Permutations
B.TECH. (BCL) Page 81
• Computation of Combination - Advanced problems
• Advanced probability
Module: 3 Verbal Ability 5 hours
Image interpretation
1. Image interpretation: Methods
2. Exposure to image interpretation questions through brainstorming and practice

Critical Reasoning - Advanced

1. Concepts of Critical Reasoning
2. Exposure to advanced questions of GMAT level
Module: 4 Recruitment Essentials 8 hours
Mock interviews

Cracking other kinds of interviews

Skype/ Telephonic interviews
Panel interviews
Stress interviews

Guesstimation
1. Best methods to approach guesstimation questions
2. Practice with impromptu interview on guesstimation questions

Case studies / situational interview

1. Scientific strategies to answer case study and situational interview questions
2. Best ways to present cases
3. Practice on presenting cases and answering situational interviews asked in
recruitment rounds
Module: 5 Problem solving and Algorithmic skills 18 hours
1. Logical methods to solve problem statements in Programming
2. Basic algorithms introduced
Total Lecture hours 45 hours
Mode of Evaluation: FAT, Assignments, Mock interviews, 3 Assessments with Term End
FAT (Computer Based Test)
Text Book(s):
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1st Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1st Edition, McGraw-Hill Education Pvt. Ltd.
3. SMART, Place Mentor, 2018, 1st Edition, Oxford University Press.
4. R S Aggarwal, Quantitative Aptitude for Competitive Examinations, 2017, 3rd Edition,
S. Chand Publishing, Delhi.
Reference Book(s):
1. Arun Sharma, Quantitative Aptitude, 2016, 7th Edition, McGraw Hill Education Pvt.
Ltd.

B.TECH. (BCL) Page 82

 PREPAREDNESS FOR EXTERNAL L T P J C
STS3001
OPPORTUNITIES 3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To effectively tackle the interview process, and leave a positive impression with your
prospective employer by reinforcing your strength, experience and appropriateness for the
job.
2. To check if candidates have the adequate writing skills that are needed in an organization.
3. To enhance the problem solving skills.
Expected Course Outcome:
1. Enabling students acquire skills for preparing for interviews, presentations and higher
education
Module: 1 Interview Skills 3 hours
Types of interview
Structured and unstructured interview orientation, Closed questions and hypothetical questions,
Interviewers' perspective, Questions to ask/not ask during an interview
Techniques to face remote interviews
Video interview, Recorded feedback , Phone interview preparation
Mock Interview
Tips to customize preparation for personal interview, Practice rounds
Module: 2 Resume Skills 2 hours
Resume Template
Structure of a standard resume, Content, color, font
Use of power verbs
Introduction to Power verbs and Write up
Types of resume
Quiz on types of resume
Customizing resume
Frequent mistakes in customizing resume, Layout - Understanding different company's
requirement, Digitizing career portfolio
Module: 3 Presentation Skills 6 hours
Preparing presentation
10 tips to prepare PowerPoint presentation, Outlining the content, Passing the Elevator Test
Organizing materials
Blue sky thinking, Introduction , body and conclusion, Use of Font, Use of Color, Strategic
presentation
Maintaining and preparing visual aids
Importance and types of visual aids, Animation to captivate your audience, Design of posters
Dealing with questions
Setting out the ground rules, Dealing with interruptions, Staying in control of the questions,
Handling difficult questions
B.TECH. (BCL) Page 83
Module: 4 Quantative Ability 14 hours
Permutation-Combinations
Counting, Grouping, Linear Arrangement, Circular Arrangements
Probability
Conditional Probability, Independent and Dependent Events
Geometry and Mensuration
Properties of Polygon, 2D & 3D Figures, Area & Volumes
Trigonometry
Heights and distances, Simple trigonometric functions
Logarithms
Introduction, Basic rules
Functions
Introduction, Basic rules
Quadratic Equations
Understanding Quadratic Equations, Rules & probabilities of Quadratic Equations
Set Theory
Basic concepts of Venn Diagram
Module: 5 Reasoning Ability 7 hours
Logical reasoning
Syllogisms, Binary logic, Sequential output tracing, Crypto arithmetic
Data Analysis and Interpretation
Data Sufficiency
Data interpretation-Advanced Interpretation tables, pie charts & bar chats
Module: 6 Verbal Ability 8 hours
Comprehension and Logic
Reading comprehension
Para Jumbles
Critical Reasoning :
Premise and Conclusion, Assumption & Inference, Strengthening & Weakening an Argument
Module: 7 Writing Skills 5 hours
Note making
What is note making, Different ways of note making
Report writing
What is report writing, How to write a report, Writing a report & work sheet
Product description
Designing a product, Understanding it's features, Writing a product description
Research paper
Research and its importance, Writing sample research paper
Total Lecture hours 45 hours
Text Book(s)
1. Michael Farra, Quick Resume & Cover letter Book, 2011, 1st Edition, JIST Editors,
Saint Paul.
2. Daniel Flage, An Introduction to Critical Thinking, 2002, 1st Edition, Pearson, London.

B.TECH. (BCL) Page 84

Reference Books
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1st Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1st Edition, McGraw-Hill Education Pvt. Ltd.
Mode of Evaluation: FAT, Assignments, Projects, Case studies, Role plays,
3 Assessments with Term End FAT (Computer Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 85

 L T P J C
STS3004 DATA STRUCTURES AND ALGORITHMS
3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To assess how the choice of data structures and algorithm design methods impacts the performance
of programs.
2. To develop logics which will help them to create programs, applications in C.
3. To learn how to design a graphical user interface (GUI) with Java Swing.
Expected Course Outcome:
1. Clear knowledge about problem solving skills in DS & Algorithms concepts
Module: 1 Data Structures 10 hours
Introduction to data structures, Array, Linked List, Stack, Queue, Trees.
Module: 2 Algorithms 15 hours
Introduction to Algorithms, Searching Algorithms, Sorting Algorithms, Greedy Algorithm, Divide and
Conquer, Analysis of Algorithm.
Module: 3 C Programming 10 hours
Introduction to C, Execution and Structure of a C Program, Data Types and Operators, Control Statements,
Looping, Arrays, Structure, Pointers, Memory Management in C, Functions
Module: 4 C++ Programming 5 hours
Introduction to C++, Need for OOP, Class & Objects, Create C++ & Java class and show the similarity
Encapsulation, Access Specifiers, Relationship, Polymorphism, Exception Handling, Abstract Classes.
Module: 5 JAVA 5 hours
Introduction to Java, Data Types and Operators, Control Statements, Looping, Arrays, Need for OOP,
Class & Objects, Create C++ & Java class and show the similarity Encapsulation, Access Specifiers,
Relationship, Polymorphism, Exception Handling, Abstract Classes, Interfaces.
Total Lecture hours 45 hours
Reference Books
1. Data Structures and Algorithms:
https://ece.uwaterloo.ca/~dwharder/aads/Lecture_materials/: University of waterloo.
2. C Programming: C Programming Absolute Beginner’s Guide (3rd Edition) by Greg Perry,
Dean Miller.
3. Java: Thinking in Java, 4th Edition.
Mode of Evaluation: FAT, Assignments, Projects, 3 Assessments with Term End FAT
(Computer Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 86

 L T P J C
STS3005 CODE MITHRA
3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To develop logics which will help them to create programs, applications in C.
2. To learn how to design a graphical user interface (GUI) with Java Swing.
3. To present an introduction to database management systems, with an emphasis on how to
organize, maintain and retrieve - efficiently, and effectively.

Expected Course Outcome:

1. Enabling students to write coding in C,C++,Java and DBMS concepts
Module: 1 C Programming 15 hours
Introduction to C, Execution and Structure of a C Program, Data Types and Operators, Control
Statements, Looping, Arrays, Structure, Pointers, Memory Management in C, Functions.
Module: 2 C++ Programming 15 hours
Introduction to C++, Need for OOP, Class & Objects, Create C++ & Java class and show the
similarity Encapsulation, Access Specifiers, Relationship, Polymorphism, Exception Handling,
Abstract Classes, Interfaces.
Module: 3 JAVA 10 hours
Introduction to Java, Data Types and Operators, Control Statements, Looping, Arrays, Need for
OOP, Class & Objects, Create C++ & Java class and show the similarity Encapsulation, Access
Specifiers, Relationship, Polymorphism, Exception Handling, Abstract Classes, Interfaces.
Module: 4 Database 5 hours
Introduction to database, DDL, Data Manipulation, SELECT, Joins.
Total Lecture hours 45 hours
Reference Books
1. Data Structures and Algorithms:
https://ece.uwaterloo.ca/~dwharder/aads/Lecture_materials/
2. C Programming: C Programming Absolute Beginner’s Guide (3rd Edition) by Greg Perry,
Dean Miller.
3. Java: Thinking in Java, 4th Edition.
4. Websites: www.eguru.ooo
Mode of Evaluation: FAT, Assignments, Projects 3 Assessments with Term End FAT (Computer
Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 87

 L T P J C
STS3006 PREPAREDNESS FOR RECRUITMENT
3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To enhance the problem solving skills.
2. To check if candidates have the adequate writing skills that are needed in an organization.
3. To reason, model, and draw conclusions or make decisions with mathematical, statistical,
and quantitative information.
Expected Course Outcome:
1. Students will be able to solve mathematical, reasoning and verbal questionnaires
Module: 1 Quantitative Ability 12 hours
Time and Work, Time Speed and Distance, Number System, Equations, Percentages, Profit and
Loss, Permutation and Combination, Probability, Geometry and Mensuration, Averages,
Progression, Allegations and Mixtures, Ages
Module: 2 Reasoning Ability 12 hours
Data Arrangement - Linear, Circular and Cross Variable Relationship, Data Sufficiency, Data
Interpretation-Advanced Interpretation Tables, Coding and Decoding, Abstract Reasoning, Input
Type Diagrammatic Reasoning, Spatial Reasoning, Cubes, Clocks and Calendar
Module: 3 Verbal Ability 21 hours
Vocabulary Building
Synonyms & Antonyms, One word substitutes, Word Pairs, Spellings, Idioms, Sentence
completion, Analogies, Cloze Test.
Comprehension and Logic
Reading comprehension
Para Jumbles
Critical Reasoning
Premise and Conclusion, Assumption & Inference, Strengthening & Weakening an Argument.
Sentence Correction
Modifiers, parallelism, Verb time sequences, Comparison, Determiners.
Building personal lexicon
Benefits of becoming a logophile, Etymology – Root words, Prefix and suffix.
Grammar
Spot the Errors, Sentence Correction, Gap Filling Exercise.
Text Book(s)
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1st Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1st Edition, McGraw-Hill Education Pvt. Ltd.
3. R S Aggarwal, Quantitative Aptitude for Competitive Examinations, 2017, 3rd Edition,
S. Chand Publishing, Delhi.

B.TECH. (BCL) Page 88

Reference Books
1. Arun Sharma, Quantitative Aptitude, 2016, 7th Edition, McGraw Hill Education Pvt. Ltd.
Mode of evaluation: Assignments, Projects, Case studies, FAT (Computer Based Test)
Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th AC Date 15.06.2017

B.TECH. (BCL) Page 89

 L T P J C
STS3007 PREPAREDNESS FOR RECRUITMENT
3 0 0 0 1
Syllabus version
Pre-requisite None
2
Course Objectives:
1. To enrich the logical thinking ability for better analysis and decision making
2. To hone the competence in solving problems and reasoning skills
3. To build a good vocabulary and use it in effective communication
Expected Course Outcome:
1. Students will be able to solve mathematical, reasoning and verbal questionnaires
Module: 1 Quantitative Ability 15 hours
Time and Work, Time Speed and Distance, Number System, Equations, Percentages, Profit and
Loss, Permutation and Combination, Probability, Geometry and Mensuration, Averages,
Progression, Allegations and Mixtures, Ages
Module: 2 Reasoning Ability 12 hours
Data Arrangement - Linear, Circular and Cross Variable Relationship, Data Sufficiency, Data
Interpretation-Advanced Interpretation Tables, Coding and Decoding, Abstract Reasoning, Input
Type Diagrammatic Reasoning, Spatial Reasoning, Cubes, Clocks and Calendar
Module: 3 Verbal Ability 18 hours
Vocabulary Building
Synonyms & Antonyms, One word substitutes, Word Pairs, Spellings, Idioms, Sentence
completion, Analogies, Cloze Test.
Comprehension and Logic
Reading comprehension
Para Jumbles
Critical Reasoning :
Premise and Conclusion, Assumption & Inference, Strengthening & Weakening an Argument.
Sentence Correction
Modifiers, parallelism, Verb time sequences, Comparison, Determiners.
Building personal lexicon
Benefits of becoming a logophile, Etymology – Root words, Prefix and suffix.
Text Book(s)
1. FACE, Aptipedia Aptitude Encyclopedia, 2016, 1st Edition, Wiley Publications, Delhi.
2. ETHNUS, Aptimithra, 2013, 1st Edition, McGraw-Hill Education Pvt. Ltd.
3. R S Aggarwal, Quantitative Aptitude For Competitive Examinations, 2017, 3rd Edition,
S. Chand Publishing, Delhi.
Reference Books
1. Arun Sharma, Quantitative Aptitude, 2016, 7th Edition, McGraw Hill Education Pvt. Ltd.

Mode of evaluation: Assignments, Projects, Case studies, FAT (Computer Based Test)

B.TECH. (BCL) Page 90

Recommended by Board of Studies 09.06.2017
Approved by Academic Council 45th ACM Date 15.06.2017

B.TECH. (BCL) Page 91

 L T P J C
STS3101 INTRODUCTION TO PROGRAMMING SKILLS
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java
Module: 1 Object and Class, Data types 8 hours
Types of programming
Disadvantages of functional programming
Class & Objects
Attributes
Methods
Objects
Solving MCQs based on Objects and Classes
Solving tricky questions based on encapsulation
Solving frequently asked object-based questions
Data types
Data
Why data type
Variables
Available data types
Numeric – int, float, double
Character – char, string
Solving MCQs based on type casting, data types
Solving debugging based MCQs
Module: 2 Basic I / O, Decision Making, Loop Control 8 hours
Printing
Getting input from user during run time
Command line arguments
Solving programming questions based on CLA
Solving MCQs questions based on CLA

Need for control statement

if..else
if..else if..else
Nested if..else
Switch case
Common mistakes with control statements (like using = instead of == )

B.TECH. (BCL) Page 92

Solving frequently asked questions on decision making

Types of looping statements

Entry Controlled
For
While
Exit Controlled
do while
break and continue
Demo on looping
Common mistakes with looping statements (like using; at the end of the loop)
Solving pattern programming problems, series problems
Solving predict the output questions
Module: 3 String, Date, Array 10 hours
String handling, date handling
Solving problems based on arrays like searching, sorting, rearranging, iteration)
Multi-dimensional arrays
Solving pattern problems using 2D arrays
Real time application based on 2D arrays
Module: 4 Inheritance, Aggregation & Associations 12 hours
Need
Is A – Inheritance
Types of inheritance supported
Diagrammatic representation
Demo on inheritance
Has A – Aggregation
Diagrammatic representation
Demo on aggregation
Uses A - Association
Diagrammatic representation
Demo on association
Assignment on relationships
Solving MCQs based on relationships between classes
Module: 5 Modifiers, Interface & Abstract classes (Java specific), Packages 7 hours
Types of access specifiers
Demo on access specifiers
Assignment on access modifiers
Instance Members
Solving MCQs based on modifiers
Abstract Classes
Need
Abstract Classes
Abstract Methods
Interfaces
Assignment on abstract classes and interface
Need for packages

B.TECH. (BCL) Page 93

Access specifiers & packages
Import classes from other packages
Total Lecture hours 45 hours
Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean.
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 94

 L T P J C
STS3104 ENHANCING PROGRAMMING ABILITY
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java
Module: 1 Collections 12 hours
ArrayList, LinkedList, List Interface, HashSet, Map Interface, HashMap, Set
Programming questions based on collections
Real world problems based on data structure
Module: 2 Threads, Exceptions, LinkedList, Arrays 6 hours
Need of threads
Creating threads
Wait
Sleep
Thread execution

Need for exception handling

try, catch, throw, throws
Creating own exception (Java, Python)
Handling own exceptions

Solving programming questions based on linked list and arrays

Module: 3 Stack and Queue, Trees 7 hours
Solving programming questions based on stacks and queues
How to implement a stack using queue?
How to implement a queue using stack?

Solving programming questions based on trees, binary trees, binary search trees
Module: 4 JDBC Connectivity, JDBC Data 10 hours
JDBC Overview
Database Setup
Install the MySQL Database
Create New Database User in MySQL Workbench
Selecting data from tables

B.TECH. (BCL) Page 95

Inserting Data into the Database
Updating Data in the Database
Deleting Data from the Database
Creating Prepared Statements
Module: 5 Networking with Java 10 hours
Working with URLs
Sending HTTP Requests
Processing JSON data using Java
Processing XML data using Java
Total Lecture hours 45 hours
Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean.
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 96

 L T P J C
STS3105 COMPUTATIONAL THINKING
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
Clear Knowledge about problem solving skills in JAVA concepts
Students will be able to write codes in Java
Module: 1 Date, Array 10 hours
date handling
Solving problems based on arrays like searching, sorting, rearranging, iteration)
Multi-dimensional arrays
Solving pattern problems using 2D arrays
Real time application based on 2D arrays
Module: 2 Inheritance, Aggregation & Associations 15 hours
Need
Is A – Inheritance
Types of inheritance supported
Diagrammatic representation
Demo on inheritance
Has A – Aggregation
Diagrammatic representation
Demo on aggregation
Uses A - Association
Diagrammatic representation
Demo on association
Assignment on relationships
Solving MCQs based on relationships between classes
Module: 3 Modifiers, Interface & Abstract classes (Java specific) 10 hours
Types of access specifiers
Demo on access specifiers
Assignment on access modifiers
Instance Members
Solving MCQs based on modifiers

Abstract Classes
Need
Abstract Classes
Abstract Methods

B.TECH. (BCL) Page 97

Interfaces
Assignment on abstract classes and interface

Module: 4 Packages 5 hours

Need for packages
Access specifiers & packages
Import classes from other packages
Module: 5 Exceptions 5 hours
Need for exception handling
try, catch, throw, throws
Creating own exception (Java, Python)
Handling own exceptions
Total Lecture hours 45 hours

Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean.
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 98

 L T P J C
STS3201 PROGRAMMING SKILLS FOR EMPLOYMENT
3 0 0 0 1

Syllabus version
Pre-requisite None
1.0

Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java
Module: 1 Object and Class, Data types, Basic I / O 8 hours
Types of programming
Disadvantages of functional programming
Class & Objects
Attributes
Methods
Objects
Solving MCQs based on Objects and Classes
Solving tricky questions based on encapsulation
Solving frequently asked object based questions
Data types
Data
Why data type
Variables
Available data types
Numeric – int, float, double
Character – char, string
Solving MCQs based on type casting, data types
Solving debugging based MCQs
Printing
Getting input from user during run time
Command line arguments
Solving programming questions based on CLA
Solving MCQs questions based on CLA
Module: 2 Decision Making, Loop Control, String, Date, Array 10 hours
Need for control statement
if..else
if..else if..else
Nested if..else
Switch case
Common mistakes with control statements (like using = instead of == )

B.TECH. (BCL) Page 99

Solving frequently asked questions on decision making
Types of looping statements
Entry Controlled
For
While
Exit Controlled
do while
break and continue
Demo on looping
Common mistakes with looping statements (like using ; at the end of the loop )
Solving pattern programming problems, series problems
Solving predict the output questions
String handling, date handling
Solving problems based on arrays like searching, sorting, rearranging, iteration)
Multi-dimensional arrays
Solving pattern problems using 2D arrays
Real time application based on 2D arrays
Module: 3 Inheritance, Aggregation & Associations 10 hours

Need
Is A – Inheritance
Types of inheritance supported
Diagrammatic representation
Demo on inheritance
Has A – Aggregation
Diagrammatic representation
Demo on aggregation
Uses A - Association
Diagrammatic representation
Demo on association
Assignment on relationships
Solving MCQs based on relationships between classes

Module: 4 Modifiers, Interface & Abstract classes (Java specific), Packages 7 hours

Types of access specifiers

Demo on access specifiers
Assignment on access modifiers
Instance Members
Solving MCQs based on modifiers
Abstract Classes
Need
Abstract Classes
Abstract Methods
Interfaces
Assignment on abstract classes and interface
Need for packages
Access specifiers & packages
Import classes from other packages

B.TECH. (BCL) Page 100

Module: 5 Collections 10 hours
ArrayList, LinkedList, List Interface, HashSet, Map Interface, HashMap, Set
Programming questions based on collections
Real world problems based on data structure

Total Lecture hours: 45 hours

Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean.
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 101

 JAVA PROGRAMMING AND SOFTWARE L T P J C
STS3204
ENGINEERING FUNDAMENTS 3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java

Module: 1 Threads, Exceptions, LinkedList, Arrays, Stack and Queue 8 hours

Need of threads
Creating threads
Wait
Sleep
Thread execution

Need for exception handling

try, catch, throw, throws
Creating own exception (Java, Python)
Handling own exceptions

Solving programming questions based on linked list and arrays

Solving programming questions based on stacks and queues

How to implement a stack using queue?
How to implement a queue using stack?
Module: 2 Trees, JDBC Connectivity 7 hours
Solving programming questions based on trees, binary trees, binary search trees
JDBC Overview
Database Setup
Install the MySQL Database
Create New Database User in MySQL Workbench
Module: 3 JDBC Data 6 hours
Selecting data from tables
Inserting Data into the Database
Updating Data in the Database
Deleting Data from the Database
Creating Prepared Statements

B.TECH. (BCL) Page 102

Module: 4 Networking with Java 12 hours
Working with URLs
Sending HTTP Requests
Processing JSON data using Java
Processing XML data using Java
Module: 5 Advanced programming 12 hours
File Operations
CSV Operations
Encoder & Decoders
Encryption & Decryption
Hashes
Loggers
Total Lecture hours 45 hours
Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 103

 L T P J C
STS3205 ADVANCED JAVA PROGRAMMING
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java
Module: 1 Associations, Modifiers 9 hours
Uses A - Association
Diagrammatic representation
Demo on association
Assignment on relationships
Solving MCQs based on relationships between classes

Types of access specifiers

Demo on access specifiers
Assignment on access modifiers
Instance Members
Solving MCQs based on modifiers
Module: 2 Interface & Abstract classes (Java specific), Packages 10 hours

Abstract Classes
Need
Abstract Classes
Abstract Methods
Interfaces
Assignment on abstract classes and interface

Need for packages

Access specifiers & packages
Import classes from other packages
Module: 3 Exceptions 7 hours
Need for exception handling
try, catch, throw, throws
Creating own exception (Java, Python)
Handling own exceptions

B.TECH. (BCL) Page 104

Module: 4 Collections 15 hours
ArrayList, LinkedList, List Interface, HashSet, Map Interface, HashMap, Set
Programming questions based on collections
Real world problems based on data structure
Module: 5 LinkedList, Arrays 4 hours
Solving programming questions based on linked list and arrays

Total Lecture hours 45 hours

Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 105

 L T P J C
STS3301 JAVA FOR BEGINNERS
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java
Module: 1 Introduction to Programming 10 hours
Introduction to Flow Charts
Pseudo code
Program Development Steps & Algorithms
Computer Operations & Data Types
Comparison Operators
Single Selection
Dual Selection
Three or More Choices
Nested Ifs
Boolean Operators
Loops
Module: 2 Object and Class 10 hours
Types of programming
Disadvantages of functional programming
Class & Objects
Attributes
Methods
Objects
Solving MCQs based on Objects and Classes
Solving tricky questions based on encapsulation
Solving frequently asked object based questions
Module: 3 Data types, Basic I / O 10 hours
Data types
Data
Why data type
Variables
Available data types
Numeric – int, float, double
Character – char, string
Solving MCQs based on type casting, data types
Solving debugging based MCQs

B.TECH. (BCL) Page 106

Printing
Getting input from user during run time
Command line arguments
Solving programming questions based on CLA
Solving MCQs questions based on CLA

Module: 4 Decision Making, Loop Control 10 hours

Need for control statement
if..else
if..else if..else
Nested if..else
Switch case
Common mistakes with control statements (like using = instead of == )
Solving frequently asked questions on decision making
Types of looping statements
Entry Controlled
For
While
Exit Controlled
do while
break and continue
Demo on looping
Common mistakes with looping statements (like using ; at the end of the loop )
Solving pattern programming problems, series problems
Solving predict the output questions
Module: 5 String 5 hours
String handling
Total Lecture hours 45 hours
Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean.
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 107

 L T P J C
STS3401 FOUNDATION TO PROGRAMMING SKILLS
3 0 0 0 1
Syllabus version
Pre-requisite None
1.0
Course Objectives:
1. Ability to translate vast data into abstract concepts and to understand JAVA concepts
2. To have a clear understanding of subject related concepts
3. To develop computational ability in Java programming language
Expected Course Outcome:
1. Clear Knowledge about problem solving skills in JAVA concepts
2. Students will be able to write codes in Java
Module: 1 Object and Class 8 hours
Types of programming
Disadvantages of functional programming
Class & Objects
Attributes
Methods
Objects
Solving MCQs based on Objects and Classes
Solving tricky questions based on encapsulation
Solving frequently asked object based questions
Module: 2 Data types, Basic I / O 8 hours
Data types
Data
Why data type
Variables
Available data types
Numeric – int, float, double
Character – char, string
Solving MCQs based on type casting, data types
Solving debugging based MCQs

Printing
Getting input from user during run time
Command line arguments
Solving programming questions based on CLA
Solving MCQs questions based on CLA
Module: 3 Decision Making, Loop Control 9 hours
Need for control statement
if..else
if..else if..else
Nested if..else

B.TECH. (BCL) Page 108

Switch case
Common mistakes with control statements (like using = instead of == )
Solving frequently asked questions on decision making

Types of looping statements

Entry Controlled
For
While
Exit Controlled
do while
break and continue
Demo on looping
Common mistakes with looping statements (like using ; at the end of the loop )
Solving pattern programming problems, series problems
Solving predict the output questions
Module: 4 String, Date, Array 10 hours
String handling, date handling
Solving problems based on arrays like searching, sorting, rearranging, iteration)
Multi-dimensional arrays
Solving pattern problems using 2D arrays
Real time application based on 2D arrays
Module: 5 Inheritance, Aggregation 10 hours
Need
Is A – Inheritance
Types of inheritance supported
Diagrammatic representation
Demo on inheritance
Has A – Aggregation
Diagrammatic representation
Demo on aggregation
Solving MCQs based on relationships between classes
Total Lecture hours 45 hours
Reference Books
1. Java the Complete Reference, 2014, 9th Edition by Herbert Schildt, McGraw-Hill
Education Pvt. Ltd.
2. Introduction to Programming with Java: A Problem-Solving Approach by John Dean.
Mode of Evaluation: FAT, Assignments, 3 Assessments with Term End FAT (Computer Based
Test)

B.TECH. (BCL) Page 109

 L T P J C
CLE1003 SURVEYING
3 0 2 4 5
Syllabus version
Pre-requisite MAT1011 Calculus for Engineers
1.0
Course Objectives:
1. To provides basic knowledge about principles of surveying for location, design and preparation
of maps.
2. To know the various methods involved in surveying like tachometric, curve setting,
longitudinal and cross section.
3. To develop skills using surveying instruments including measuring tapes, compass, plane table,
levels, theodolites, and GPS.
4. To get introduced to modern advanced surveying techniques such as total station, Remote
sending, GPS, Photogrammetry and LIDAR
Expected Course Outcome:
On completion of this course the students will be able to:
1. Understanding basics involved in different types of surveying instruments and equipment like
levels, theodolite, total station, GPS and LIDAR
2. Implement the skills in performing measurement of distances, angles, elevations and location.
3. Estimate the area of given plots and earthwork involved in cutting and fillings.
4. Prepare of longitudinal and cross sections, curve setting and 3D maps.
5. Execute project work related to surveying using modern instruments.
Module: 1 Measurements of Distance, Angles and Directions 6 hours
Importance of surveying - Classifications - principles, Chain and tape measurement – Meridians,
Azimuths and bearings – compass - Theodolites – adjustments – Horizontal and Vertical angle
measurements - Plane table surveying
Module: 2 Determination of Elevations 6 hours
Differential levelling, longitudinal & cross section levelling, refraction & curvature correction,
reciprocal leveling
Module: 3 Determination of Distance and Elevations by Tacheometry 5 hours
Tacheometry – Stadia tacheometry, tangential tacheometry& substance tacheometry and Contouring
Module: 4 Calculation of Area and Volume 6 hours
Area - Computation, measurements from cross section - volume calculation from spot levels, earth
work calculations, practical problems
Module: 5 Curve Surveying 6 hours
Definitions, designation of curve, elements of simple curve - settings of simple circular curve,
compound and reverse curve- transition curve – Introduction to vertical curve
Module: 6 Modern Field Instruments 7 hours
Electronic Distance Measurement - Basic Principle – Classifications -Electro-optical system -
computing distances – Electronic Total Station instruments – Types – Measurements with total
station - Surveying with Global Positioning Systems (GPS); Field data collection through remote
sensing and Photogrammetry
B.TECH. (BCL) Page 110
Module: 7 Field Applications 7 hours
Preparation of Topographic Map- Contour Map - TIN model and Generation of 3D Surface -
Preparation of Longitudinal & cross section of roads using Software
Module: 8 Contemporary issues 2 hours
Total Lecture hours 45 hours
Text Book (s)
1. Surveying and Levelling, Vol. I &II, by B. C. Punmia, Laxmi Publications, 2016.
Reference Books
1. Surveying Vol. I, II and III by Dr. K.R. Arora, Standard Book House. New Delhi Roy S. K.
(2009), Fundamentals of Surveying, Prentice Hall of India.
2. Surveying and Levelling, by R. Subramaniyan, Oxford University Press 2014.
3. Satheesh Gopi (2005) GPS Principles and Applications, Tata McGraw Hill publishing company
Ltd.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
List of Challenging Experiments (Indicative)
1. Calculate the area of a given parcel of land by cross staff survey using chain
3 hours
surveying.
2. Find the two-dimensional coordinates of the survey points through traversing
3 hours
with prismatic compass and chain
3. Prepare the layout map of a given building using Plane Table Surveying 3 hours
4. Horizontal & Vertical Angle measurement using Theodolite 3 hours
5. Calculate the reduced level of points by rise and fall method and height of
3 hours
collimation method using dumpy level
6. Longitudinal and Cross Sectional leveling of a given road segment using
3 hours
dumpy level
7. Stadia tacheometry to find the distance and elevation 3 hours
8. Tangential Tacheometry to find the distance and elevation 3 hours
9. Setting out of a Simple Circular Curve 2 hours
10. Contour map preparation using RLs calculated from staff readings of dumpy
2 hours
level
11. Distance and angular measurement and area calculation using total station 2 hours
Total Laboratory Hours 30 hours
Sample J component projects are listed below
Sl. No. Projects
1. Design and Working Multilevel Parking
In Depth Focus on Future of Airport Planning, Design and Construction by Analyzing
2.
Current Issues
3. Surveying of Footover Bridge

B.TECH. (BCL) Page 111

 4. Various Software to Analyze Surveying Data
5. River Drainage Pattern and Construction of Reservoir
6. Design and Planning of an Airport
7. Rail Alignment
8. Highway Construction Survey
9. Construction of a Multi Level Toll Plaza
10. Harbor Designing
11. Survey for Stadium
12. Road Construction and Developing Effective Transportation System
13. Modernisation of Cafeteria and Ease to Access It
Mode of assessment: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 112

 L T P J C
CLE1004 SOIL MECHANICS ANDFOUNDATION ENGINEERING
3 0 2 0 4
Syllabus version
Pre-requisite MAT1011 Calculus for Engineers
1.0
Course Objectives:
1.To impart the fundamental concepts of soil mechanics and understand the bearing capacity
2. To understand the concept of compaction and consolidation of soils
3. To understand the design aspects of foundation
4. To evaluate the stress developed in the soil medium
5. To study the stability of slopes
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Compare the various engineering and index properties of soil.
2. Explain the hydraulic conductivity of the soil and seepage actions.
3. Examine the stress distribution at any point below the ground level.
4. Evaluate the shear strength of the soil using Mohr Soil.
5. Discuss the soil investigation techniques for advanced explorations and to conduct the field test
like SPT & PLT.
6. Evaluate the safe bearing capacity of shallow foundations
7. Estimate load carrying capacity of pile foundations and to compute the lateral earth pressure.
Module: 1 Soil Properties and Compaction 7 hours
Basic definitions; Phase relations; Index properties; Grain size distribution & Index properties; Soil
Classification (IS) Compaction, Laboratory compaction tests & Factors affecting compaction.
Module: 2 Effective Stress Principle and Permeability 5 hours
Principle of effective stress; Capillarity; Seepage force and quicksand condition One-dimensional flow;
Darcy’s law; Laboratory methods for permeability determination.
Module: 3 Stress Distribution and Consolidation 7 hours
Boussinesq stress distribution theory and Newmarks chart Compressibility of soils, e-p data and stress
history; Normally consolidated and over-consolidated soils; Terzaghi’s theory of one-dimensional
consolidation; Time-rate of consolidation; Evaluation of compressibility and consolidation parameters.
Module: 4 Shear Strength Behaviour 6 hours
Mohr’s stress circle; Mohr-Coulomb failure criterion; Laboratory tests for shear strength
determination; Effective and total stress shear strength parameters; Shear strength characteristics of
clays and sands.
Module: 5 Soil Exploration 4 hours
Objective of site investigation– Detailed site investigation – Methods of exploration – Depth of
exploration – Factors governing location and depth of foundation – Types of Foundations – Selection
of Foundation. Preparation of soil investigation report
Module: 6 Bearing Capacity and Settlements of Shallow Foundations 8 hours
Terzaghi’s theory of bearing capacity – General and local shear failure - Effect of Water table – Plate
load test – Standard Penetration Test – Design of Footings – Settlement of footings - Immediate and
B.TECH. (BCL) Page 113
Time dependent settlement – Permissible limits of total and differential Settlement
Module: 7 Pile Foundations and Slope Stability 6 hours
Classification and selection of piles – Static and dynamic formulae for single pile capacity – Efficiency
and capacity of pile groups – Design of Pile group – Settlement of Pile Groups– Load test on piles
Failure of infinite and finite slopes – Swedish circle method – Factor of safety - Slope stability of earth
dams.
Definitions – Earth pressure at rest – Rankine’s active and passive earth pressures - Coulomb’s earth
pressure theories – Types of retaining walls
Module: 8 Contemporary issues 2 hours
Total Lecture hours 45 hours
Text Book (s)
1. K. R. Arora, “Soil mechanics and Foundation Engineering” Std. Publishers, New Delhi, 2011.
Reference Books
1. Braja M. Das, “Principles of Geotechnical Engineering”, Cengage learning Pvt. Ltd., 8th
Edition, 2014.
2. Holtz D. and Kovacs, W.D., “An Introduction to Geotechnical Engineering”, Prentice Hall. 2nd
Edition 2011.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
List of Challenging Experiments (Indicative)
1. Determination of Specific Gravity 2 hours
2. Grain size Analysis – Mechanical Method 2 hours
3. Consistency Limits
i) Liquid Limit 2 hours
ii) Plastic Limit
4. Relative density 2 hours
5. Compaction Test 2 hours
6. Determination of Field Density 2 hours
7. Coefficient of Permeability – Constant Head & falling head Method 3 hours
8. Direct Shear Test 3 hours
9. Unconfined compression Test 3 hours
10. Vane shear test 3 hours
11. Consolidation Test 3 hours
12. California Bearing Ratio Test 3 hours
Total Laboratory Hours 30 hours
Mode of assessment: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016
B.TECH. (BCL) Page 114
 L T P J C
CLE1006 ENVIRONMENTAL ENGINEERING
2 0 2 4 4
Syllabus version
Pre-requisite MAT1011 Calculus for Engineers
1.0

Course Objectives:
1. To teach students the basic principles and concepts of unit operations and processes involved
in water and wastewater treatment
2. To develop a student’s skill in the basic design of unit operations and processes
involved in water and wastewater treatment
3. To develop a student’s skill in evaluating the performance of water and wastewater treatment
plants
4. To teach students the various methods of sludge management
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Quantify water required for a given population
2. Examine the type and size of reactor required for various unit operations and processes
involved in water and wastewater treatment
3. Able to design individual unit operation or process appropriate to the situation by applying
physical, chemical, biological and engineering principles.
4. Able to identify the type of unit operations and processes involved in water and
wastewater treatment plants based on the water quality
5. Prepare the layout of water and wastewater treatment plants.
6. Evaluate the water and wastewater treatment plants
7. Investigate the performance of various unit operations and processes to meet the desired
health and environment related goals.
8. Understand sludge management and disposal
Module: 1 Introductions to water and wastewater treatment 3 hours
Basics of water supply – Networks - forecasting methods. On site and centralized treatment systems,
Water and wastewater quality parameters, Role of water and wastewater quality parameters and their
standards
Module: 2 Water and wastewater quality enhancement 5 hours
Unit operations and unit processes, Concept and application of mass balance in reactor design,
Fundamentals of process kinetics
Module: 3 Physical treatment of surface water and groundwater 5 hours
Sedimentation, filtration, adsorption and ion exchange, membrane
Module: 4 Shear Strength Behaviour 4 hours
Coagulation-flocculation; Chemical Softening; Chlorination; Oxidation
Module: 5 Pre-and primary treatment of wastewater 3 hours
Process flow sheet; Screen, grit removal, oil and grease removal, primary sedimentation

B.TECH. (BCL) Page 115

Module: 6 Secondary Treatment of wastewater 6 hours
Activated sludge process, conventional and extended aeration, trickling filters and biotowers, UASB
process and other low cost system
Module: 7 Wastewater and Sludge Disposal 2 hours
Reuse systems, wastewater disposal on land and water bodies, and disposal of sludge

Module: 8 Contemporary issues 2 hours

Total Lecture hours 30 hours

Text Book (s)
1. Peavy, H.S., Rowe, D.R. and Tchobanoglous, G., “Environmental Engineering”, McGraw
Hill, 2013
Reference Books
1. Davis, M. L. and Cornwell, D. A., “Introduction to Environmental Engineering”, McGraw
Hill., 2013.
2. Masters, G.M., “Introduction to Environmental Engineering and Science”, Prentice Hall of
India, 2008.
3. Arcievala, S. J., “Wastewater Treatment for Pollution Control”, Tata McGraw Hill., 2009.
4. Metcalf and Eddy, Wastewater Engineering, Treatment and reuse, Tata McGraw-Hill Edition,
Fourth edition, 2007.
5. Hammer, M.J. and Hammer, M.J., “Water and Wastewater Technology”, 7thEd., Prentice Hall
of India, 2011.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
List of Challenging Experiments (Indicative)
1. Determination of pH, Turbidity and conductivity (IS 3025 Part 11, 10 and 14) 2 hours
2. Determination of Hardness (IS 3025 Part 21); Determination of Alkalinity (IS 2 hours
3025 Part 23)
3. Determination of Chlorides (IS 3025 Part 32) 2 hours
4. Determination of Sulfates (IS 3025 Part 24) 2 hours
5. Determination of fluoride (Standard Methods for examination of Water & 2 hours
Wastewater, APHA)
6. Determination of Optimum Coagulant dosage 2 hours
7. Determination of residual chlorine and available chlorine in bleaching powder (IS 2 hours
3025 Part 25 and 26)
8. Determination of Oil, and Grease (IS 3025 Part 39) 2 hours
9. Determination of suspended, settleable, volatile and fixed solids (IS 3025 Part 15, 2 hours
17, 18, and 19)
10. Determination Dissolved Oxygen and BOD for the given sample (IS 3025 Part 38 2 hours
and 44)
11. Determination of COD for given sample (IS 3025 Part 58) 2 hours
12. Determination of SVI of Biological sludge and microscopic examination 2 hours

B.TECH. (BCL) Page 116

13. Determination of MPN index of given water sample (IS 5401 Part 1) 2 hours
14. Estimation of Nitrate a in water using UV-Visible Spectrometer 2 hours
15. Combined estimation of anions (Fluoride, Chloride, Bromide, Nitrate, Phosphate, 2 hours
Sulphate) in water using Ion Chromatography
Total Laboratory Hours 30 hours
Sample projects for J component (60 hrs)

1. Design of advanced water and wastewater treatment units

2. Application of software in design of treatment units
Design and execution of experiments to generate data needed for design of various
3.
treatment reactors
4. Process development / modification
5. Application of nanomaterials in water and wastewater treatments
Understanding the problem of excessive use of nanomaterials – how this effect conventional
6.
treatment units
Water and wastewater quality analysis – identification of source of pollution with the help
7.
of mathematical models/software
8. Water quality modeling
9. Selection of treatment units – developing management models
10. Groundwater quality monitoring
11. Fabrication and evaluation of treatment units for diverse liquid waste
12. Integrated treatment units
13. Cost –benefit analysis of various treatment units – this will be done using existing data
14. Health monitoring of local Rivers
15. River water quality management
Mode of assessment: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 117

 L T P J C
CLE1007 CONSTRUCTION MATERIALS AND TECHNIQUES
3 0 0 0 3
Syllabus version
Pre-requisite NIL
1.1

Course Objectives:
1. To understand the role of civil engineers and accomplishment in civil engineering profession.
2. To understand the physical and mechanical properties of construction materials and their
respective testing procedure.
3. To know the building materials available in market for construction purpose.
4. To learn the principles and methods to be followed in construction of various civil engineering
structures.
5. To learn different types of scaffolding and centering in building construction.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the role of civil engineers and accomplishment in civil engineering
2. Identify the relevant physical and mechanical properties of construction materials.
3. Apply the modern construction materials and roofing materials appropriate to the climate and
functional aspects of the buildings.
4. Describe the principles and methods involved in prefabricated construction.
5. Decide construction technique to be followed in brick, stone and hollow block masonry,
concreting, flooring, roofing, plastering and painting etc
6. Apply various types of scaffolding and its applications in construction.

Module: 1 Introduction to Civil Engineering 5 hours

Role of Civil Engineers in Society; Outstanding accomplishments of the profession; Future trends.
Techno-economic considerations

Module: 2 Materials & its Properties 8 hours

Physical and Mechanical properties of construction materials - commonly used types of stones -
Tests for stones, road aggregates and concrete aggregates, properties of sand, BIS specification for
testing of aggregates –Bricks – Properties and testing methods for Bricks, Recycled Aggregates-
Cement-Cement – Manufacturing -wet and dry processes, constituents and constitution, properties -
Types of cement – Testing of Cement
Module: 3 Modern Construction Materials 6 hours
Modern materials – Neoprene, thermocole, decorative panels and laminates, architectural glass and
ceramics, ferrocement, PVC, polymer base materials, fibre reinforced plastics.
Module: 4 Roofing Material 6 hours

Structural Steel and Aluminium – Roofing Material – Physical descriptions of asbestos sheets, GI
sheets, tubes and light weight roofing materials - Timber - Types, Seasoning and various products

B.TECH. (BCL) Page 118

Module: 5 Prefabricated Construction 8 hours
Prefabricated panels and structures – production, transportation and erection of structures- Types of
projects; Stages of projects; Participants in projects and their role; Techno-economic considerations;
Project failures and their causes - Case studies

Module: 6 Construction Components 7 hours

Principles of construction – Selection of suitable type of masonry – Reinforced brick work – Stone
masonry – Hollow block masonry - Pointing and Plastering- its purpose – Damp proof Course
(DPC)- Anti-termite measures and treatments-Construction Joints- need and materials used
Module: 7 Scaffolding 3 hours
Types of scaffolding and centering-its suitability as per situations and the type of structures.

Module: 8 Contemporary issues 2 hours

Total Lecture hours 45 hours

Text Book (s)
1. Rangwala, (2016), Building construction, Charotar Publishers
Reference Books
1. Ken Ward-Harvey (2009) (fourth edition), Fundamental building materials, Universal
Publisher.
2. Edward Allen, Joseph Iano (2013) Fundamentals of Building Construction; Materials and
Methods, Willey Publications.
3. Rangwala, (2015), Engineering materials, Charotar Publishers.
4. Edward Allen, Joseph Iano (2014) (Sixth Edition), Fundamental building materials, John
Wiley & sons inc (Publisher).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 119

 L T P J C
CLE2001 BUILDING DRAWING
1 0 2 4 3
Syllabus version
Pre-requisite CLE1007 – Construction Materials and Techniques
1.0

Course Objectives:

1. To understand the National Building Code regulations

2. To apply the AUTO CAD commands in layout and plans
3. To identify the requirements for various building components
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Examine the dimensions and describe the types of building.
2. Apply the AUTO CAD commands in preparation of detailed plan.
3. Identify the National Building Code standards for planning.
4. Understand all the parts of the structure and its standard sizes.
5. Explain the types of roof and roofing materials.
6. Design and develop a plan for residential and hospital building
7. Demonstrate and prepare a detailed plan for institutional and industrial buildings.
Module: 1 Introduction to Building Drawing 2 hours
Types of Buildings - Building Regulations as per Indian Standards - Drawing Tools - Standard
Paper Size - BIS, ISO, Architecture and ANSI Specifications and Notations.
Module: 2 GUI of AutoCAD 2 hours
Basic Commands - 2D Drafting and Annotation - Sheets and Layouts - Blocks and Customizing
AutoCAD. Introduction to Building Information Modeling
Module: 3 Building Planning 2 hours
Provisions of National Building Code - Building bye-laws - open area - setbacks - FAR terminology
- Principles of planning - orientation - ventilation and lighting. Provisions for differently abled
persons.
Module: 4 Building Elements 2 hours
Foundations - Plinth beam - Column- Beam - Slab- Lintel - Staircase - doors and windows - Types -
Specifications - Standard sizes - Notations.

Module: 5 Roof Types 1 hour

Flat and Pitched roofs.

Module: 6 Planning of Residential and Hospital buildings 2 hours
Single bed room - double bed-room - multi-storey buildings - Hospitals buildings with Pharmacy
and Dispensaries.

B.TECH. (BCL) Page 120

Module: 7 Institutional, Commercial and Industrial buildings 2 hours
School Building with Hostel - Workshop and Factory buildings with steel truss
Module: 8 Contemporary issues 2 hours
Total Lecture hours 15 hours
Text Book (s)
1. Kumara Swamy N and Kameswara Rao A, "Building Planning and Drawing", Charotar
Publishing House Pvt. Ltd., 2013.
Reference Books
1. Gurcharan Singh, “Civil Engineering Drawing”, Standard Publishers, New Delhi, 2009.
2. Randy Shih, “Autocad 2016 Tutorial First Level - 2D Fundamentals”, Schroff Development
Corp, 2015.
3. Mark W. Huth Delmar, "Understanding Construction Drawings", Cengage Publishers, 2013.
4. National Building Code of India 2005, Reprint edition, Bureau of Indian Standards, Govt. of
India, 2013.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Preparation of line sketches in accordance with functional requirements and building rules for
the following types of building as per National Building Code:
1. Flat roof residential building 2 hours
2. Pitched roof residential building 2 hours
3. Multi-storeyed building 2 hours

4. Industrial Building 2 hours

Detailed Drawings (Plan, Elevation and section for the following) by manual and by using
AutoCAD:

5. Detailed drawing for doors, windows. 3 hours

6. Planning, design and detail drawings of staircase 3 hours

7. Flat roof building with load bearing wall 4 hours
8. Pitched roof with load bearing wall 4 hours
9. Framed structures 4 hours

10. Industrial Building with North light roof truss 4 hours

Total Lecture hours 30 hours

Sl. No. Sample project titles for J component (60 hours)

1. Prepare the detailed plan for Primary health center

2. Prepare the detailed plan for a hostel building

B.TECH. (BCL) Page 121

 3. Prepare the detailed plan for a secondary school building
4. Prepare the detailed plan for a manufacturing industry
5. Prepare the detailed plan for a shopping mall
6. Prepare the detailed plan for a library building

7. Prepare the detailed plan for apartments

Recommended by Board of Studies 16.08.2017

Approved by Academic Council 46th ACM Date 24.08.2017

B.TECH. (BCL) Page 122

 L T P J C
CLE2002 STRENGTH OF MATERIALS
2 2 2 0 4
Syllabus version
Pre-requisite MEE1002 – Engineering Mechanics
1.1

Course Objectives:

1. To provide the basic concepts and principles of strength of materials.

2. To give an ability to calculate stresses and deformations of objects under external loadings.
3. To give an ability to apply the knowledge of strength of materials on engineering
applications and design problems.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the fundamental concepts of stress and strain
2. Evaluate the problems relating to pure and uniform bending of beams and other simple
structures
3. Examine the deflection of beams under various loading condition.
4. Understand the concept of hoop and radial stress in design of thin and thick cylinders
5. Solve torsional deformation of Shafts
6. Understand the concept of crushing and buckling
7. Analyse the structural elements using Energy methods
Module: 1 Simple Stresses and Strains 5 hours
Stress - Strain-types of stresses and strain - Hooke’s law - tension -compression and shear – stress -
strain diagrams - relation between elastic constants - Hoop stress - composite bars in tension and
compression - Principle of superposition - bars of varying sections and of different materials -
Thermal stresses and strains - principal stresses and strains - Mohr’s circle. Theory of failures.
Module: 2 Shear Force and Bending Moment 5 hours
Beams and Bending - Types of loads, supports - Shear Force and Bending Moment Diagrams for
statically determinate beam with concentrated load, uniformly distributed load, uniformly varying
load - Point of Contra flexure - Theory of Simple bending - Distribution of bending stresses and
shear stress.
Module: 3 Deflection of Beams 5 hours
Slope and deflection of beams - Macaulay’s method - Moment area method - Conjugate beam
method.

Module: 4 Thin and Thick Shells 3 hours

Introduction - Thin Cylindrical shells - hoop stress - longitudinal stresses - Lame’s theory - Design
of thin & thick cylindrical shells.
Module: 5 Torsion in circular shaft 3 hours
Torsion - Torsion equation - solid and hollow circular shaft - Torsional rigidity - power transmitted
by the shafts

B.TECH. (BCL) Page 123

Module: 6 Theory of Columns 3 hours
Theory of columns - Long column and short column - Euler’s formula - Rankine’s formula -
Secant formula - Beam column
Module: 7 Introduction to determinate and indeterminate structures 4 hours
Castigliano’s I theorem - unit load method - Maxwell-Betti theorem
Module: 8 Contemporary issues 2 hours

Total Lecture hours 30 hours

Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.
Tutorial Class for Module 1
Tutorial Class for Module 2 30 hours
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)
1. R Subramanian, Strength of Materials, Oxford University Press, 2010.
Reference Books
1. Gere, J.M. and Goodno, B. J., “Strength of Materials”, Indian Edition (4th reprint), Cengage
Learning India Private Ltd., 2009.
2. Beer, F.P., Johuston, Jr., E.R., Dewolf, J.T. and Mazureu, D.E., “Mechanics of Materials”,
Fifth Edition, McGraw Hill, 2009.
3. Timoshenko, S. P. and Young, D. H., “Elements of Strength of Materials”, Fifth Edition, (In
MKS Units), East-West Press Pvt. Ltd., 2009.
4. Bansal R. K, "Strength of Materials", Laxmi Publications, 2010.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Sl. No. Laboratory Exercises hours
1. Tension test on steel for finding stress and strain and E. 3 hours
2. Construction of Mohr’s circle using principle stress. 3 hours
Sketching a shear force and bending moment diagrams for different types
3. 4 hours
of beams with different loading conditions
4. Torsion test 4 hours
5. Shear stress 4 hours
6. Bending stress 4 hours
7. Finding the deflection of beams 4 hours
8. Load carrying capacity of long and short columns. 4 hours
B.TECH. (BCL) Page 124
 Total Lecture hours 30 hours
Recommended by Board of Studies 27.09.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 125

 L T P J C
CLE2003 STRUCTURAL ANALYSIS
2 2 0 0 3
Syllabus version
Pre-requisite CLE2002 – Strength of Materials
1.1
Course Objectives:
1. The course will help the students understand the concepts of indeterminacy of structural
elements, analysis of the structures, drawing shear force and bending moment diagrams.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Determine the static and kinematic indeterminacy of beam, truss and frame.
2. Analyse propped cantilevers, fixed and continuous beams
3. Analyse indeterminate beams, pin and rigid jointed structures with and without temperature
effect.
4. Understand the concepts of slope deflection method for beams and portal frame.
5. Analyse continuous beams and portal frame using moment distribution method
6. Draw influence line diagrams for determinate and indeterminate beams.
7. Analyse two hinged and three hinged arches
Module: 1 Introduction to Civil Engineering 2 hours
Static and kinematic indeterminacy - Beam - Truss - Frame.
Module: 2 Shear Force and Bending Moment 2 hours
Analysis of propped cantilevers - fixed and continuous beams - bending moment and shear force
diagram.
Module: 3 Strain Energy Method 4 hours
Static indeterminacy - analysis of indeterminate structures, beams, pin jointed and rigid jointed
structures - temperature effect - bending moment and shear force diagram.
Module: 4 Slope Deflection Method 5 hours
Kinematic indeterminacy - analysis of continuous beams and portals - bending moment and shear
force diagram.
Module: 5 Moment Distribution Method 5 hours
Analysis of continuous beams and portals - bending moment and shear force diagram.
Module: 6 Influence Lines 5 hours
Influence lines for bending moment and shear force - Muller Breaslau’s - principle - determinate
and indeterminate beams - Maxwell’s reciprocal theorem.
Module: 7 Analysis of Arches & Cables 5 hours
Twohinged and three hinged arches - Cables tension forces in towers.
Module: 8 Contemporary issues 2 hours

B.TECH. (BCL) Page 126

 Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.
Tutorial Class for Module 1
Tutorial Class for Module 2
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5 30 hours
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)
1. Reddy, C.S, "Structural Analysis", Tata McGraw Hill, 2010.
Reference Books
1. Bhavikatti S. S. “Structural Analysis 1”, Vikas Publishing House, Noida, 2011.
2. Punmia, B.C, Ashok kumar Jain & Arun Kumar Jain, "Theory of Structures", Laxmi
Publications, India, 2014.
3. Ramamrutham, S. "Theory of structures", DhanpatRai publications. 2011.
4. Hibbeler, R.C, "Structural Analysis", Pearson India, 2014.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 27.09.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 127

 L T P J C
CLE2004 WATER RESOURCE ENGINEERING
2 0 2 4 4
Syllabus version
Pre-requisite MEE1004 – Fluid Mechanics
1.0
Course Objectives:
1. To motivate the students to identify, formulate, solve the complex problem to manage the
water resource related issues.
2. To prepare the students to synthesize data and technical concepts to apply in water resources
engineering.
3. To develop the ability of the students to conduct appropriate experiments, analyse and
interpret data and use engineering judgement to draw conclusions in water resources
problems.
4. To get the exposure about the concept of irrigation and flood control.
5. To provide the students an opportunity to work as a part of a project team.
6. To train the students for a successful career in water resources engineers
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify the various components of hydrological cycle and the spatial and temporal variation
of rainfall.
2. Determine the different methods and hydrological models to estimate the stream flow.
3. Examine the different techniques to calculate the probable maximum flood based on
different returned period.
4. Evaluate the basic aquifer parameters and groundwater resources for different hydro-
geological boundary conditions.
5. Understand the different methods of irrigation and find the optimum methods of irrigation
for judicious use of water resources.
6. Examine different distribution system of irrigation canal and the basic design of lined and
unlined irrigation canal.
7. Apply the mathematics, science and technology to design the minor irrigation structures to
develop the command area.
Module: 1 Precipitation Measurement and Analysis 4 hours
Hydrologic cycle and budget, Precipitation variability, rainfall and snow measurement techniques,
design of precipitation gauging network, Hydrologic Abstractions-Infiltration-evaporation-
evapotranspiration-interception and depression storage, rain harvesting-design procedure.
Module: 2 Stream Flow 5 hours
Measurement of stream flow; factors affecting stream flow; hydrograph analysis, base flow
separation, unit hydrograph and curve number methods of stream flow determination, synthetic unit
hydrograph, hydrological modeling for stream flow estimation, methods for peak discharge
estimation.
Module: 3 Flood Analysis 3 hours
Design flood estimation, frequency analysis, flood routing, storm drainage design, flood migration,
flood damage analysis.

B.TECH. (BCL) Page 128

Module: 4 Ground Water 4 hours
Ground water hydrology, Application of Darcy’s law and Aquifer characteristics, Models for
Groundwater flow analysis, steady state well hydraulics – Fundamentals of unsteady state.
Module: 5 Irrigation Practices 5 hours
Need for Irrigation in India, Scope, National Water Policy, Physical properties of soil that influence
soil moisture characteristics – Concept of soil water potential and its components, Crop water
requirements-Irrigation Scheduling- Irrigation efficiencies – Duty-Delta-base period, Surface and
Subsurface methods of Irrigation, Standards for irrigation water, Water logging and consequences –
Salinity and alkalinity-Reclamation
Module: 6 Canal Irrigation 4 hours
Classification of canals, Alignment of canals, Design of rigid boundary canals, Lacey’s and Tractive
force concepts in canal design, lining of canals; Sediment transport in canals, River training
Module: 7 Irrigation Structure 3 hours
Design procedure for –Canal Head works-Canal regulators-Canal drop –Cross drainage works-
Canal Outlet-Escapes, Lining and maintenance of canals
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Subramanya. K., “ Engineering Hydrology” McGraw Hill Education (India) Pvt. Ltd. (2013)
2. Santosh Kumar Garg, “Irrigation Engineering and Hydraulic Structures”, Khanna Publishers,
New Delhi, (2013)
Reference Books
1. Chow, V.T., Maidment, D.R. and Mays, W.L., (2010) “Applied Hydrology”, TataMcGraw
Hill Education Pvt. Ltd.
2. Punmia. B. C., Ashok Kumar Jain, Arun Kumar Jain and Pande Brij BasiLal, (2012),
“Irrigation and Water Power Engineering”, Laxmi Publications (P) Ltd.
3. Mays, L.W. (2010). Water Resources Engineering, John wiley and sons.
4. Todd D.K. and Larry W. Mays (2005)”Groundwater Hydrology", John Wiley & Sons, Inc,
New York.
5. A. K. Rastogi, (2011) "Numerical Groundwater Hydrology", Penram International
Publishing (India) Pvt. Ltd.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Laboratory exercises
1. Models for Groundwater flow analysis 5 hours

2. Estimate seepage losses and reservoir losses. 5 hours

3. Seepage analysis using software 5 hours
4. Reservoir operation losses 5 hours
5. Flood analysis 5 hours

B.TECH. (BCL) Page 129

 6. Rainfall runoff modeling 5 hours
Total 30 hours
Sl. No. Project Titles (J component) hrs
1. Advanced rain water harvesting structures
2. New methods of irrigation
3. Groundwater modeling using MODFLOW 60hrs
4. Flood frequency analysis
5. Rainfall-runoff model
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 130

 L T P J C
CLE2005 TRANSPORTATION ENGINEERING
2 0 0 4 3

Syllabus version
Pre-requisite CLE1007 – Construction Materials and Techniques
1.0
Course Objectives:
1. To expose the students with various transportation modes and their advantages and
disadvantages
2. To facilitate students to decide highway alignment and design highway geometry.
3. To enable students to select suitable materials for highway pavements and design the
pavement.
4. To explain students with various components of a railway track.
5. To prepare students to design railway track geometry.
6. To teach students to identify the alignment and length of airport runway and draw an airport
layout.
7. To illustrate students with various components of a harbour.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Classify basic design of highway geometry according to the design specifications.
2. Design a flexible pavement using IRC method.
3. Describe various components of railways and their functions.
4. Design a railway geometry according to the design specifications.
5. Classify various components of an airport and identify the alignment and the required length
of a runway.
6. Identify various components of a harbour and their functions.
Module: 1 Highway Engineering 8 hours
Introduction to Transportation Systems, Classification of Roads, Highway Planning - Road cross
section - camber, gradient, Super elevation - Sight distance - Horizontal and Vertical curve.
Module: 2 Highway Materials and Pavement Design 4 hours
Highway materials – soil, aggregate, bitumen – testing and specifications - types of pavements –
pavement design - pavement construction and maintenance.
Module: 3 Railway Engineering 3 hours
History and general features of Indian railways – Permanent way - Rails, sleepers, ballast and
subgrade – types and functions
Module: 4 Geometric Design 4 hours
Geometric design of railway track - Curves and superelevation - Points and crossings -Railway
stations and yards - Signaling and interlocking.
Module: 5 Airport Engineering 2 hours
Air transportation in India - Airport classifications - Airport site selection.

B.TECH. (BCL) Page 131

Module: 6 Geometric design of Runway 5 hours
Runway configurations – wind rose and orientation of runway - runway length- Corrections to
runway length - runway geometric design – taxiway, exit taxiway, aprons, hangars – aircraft
parking configuration and parking system - Landing and Visual aids
Module: 7 Harbour Engineering 2 hours
Water transportation – Harbours and ports - Classification – Features of harbour – Breakwaters –
Docks – Wet and dry docks – Jetties.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Highway Engineering by S.K. Khanna, C.E.G. Justo, A. Veeraragavan, 10th edition,
published by Nemchand and Bro., Roorkee, (2014)
2. Railway Engineering by Rangwala, 25th edition, Charotar publishing house private limited,
Anand, India, (2015)
3. Harbour, Dock & Tunnel Engineering- R. Srinivasan; Charotar Publishers, Ahmedabad,
2011 Airport Planning and Design- S. K. Khanna, M. G. Arora & S. S. Jain; Nem Chand &
Bros, 2012
Reference Books
1. Planning & Design of Airports – Robert Horonjeff, Francis McKelvey; Tata Mc Grawhill,
2010.
2. Dock & Harbour Engineering- H. P. Oza & G. H. Oza; Charotar Publishers, Ahmedabad,
2013.
3. Railway Engineering 2nd Edition - Satish Chandra & M. M. Agarwal; Oxford University
Press-New Delhi, 2013.
Project Titles (J component) hrs
Challenging projects for Individual or a group will be given based on the basic and
60hrs
advancements in the course content.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 132

 L T P J C
CLE3001 QUANTITY SURVEYING AND ESTIMATING
2 0 0 0 2
Syllabus version
Pre-requisite CLE2001 – Building Drawing
1.1
Course Objectives:
1. To understand the types of estimates
2. To identify the methods used for different structural components
3. To understand rate analysis and process of preparation of bills
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the methods of estimates of buildings.
2. Understand the concepts of prepare a detailed estimate for different types of structures
3. Evaluate rate for various items of works in different types of structures.
4. Prepare valuation reports and cost quality control in construction
Module: 1 Introduction- Methods of estimates 3 hours
General items of work in building – standard units –principles of working out quantities for detailed
and abstract estimates –methods of estimates of buildings.
Module: 2 Quantity Estimation for Building 6 hours
Estimation of building - Short wall and long wall method - Centre line method - Report writing.
Module: 3 Quantity Estimation for Structural steel 5 hours
Estimate of R.C.C and structural Steel - Scheduling - Slab - beam-column.
Module: 4 Quantity Estimation for Roads 4 hours
Road estimation - earthwork fully in banking - cutting - partly cutting & partly filling - Detailed
estimate and cost analysis for roads.
Module: 5 Analysis of Rates 4 hours
Rate analysis & preparation of bills - Data analysis of rates for various items of works - Sub-
structure components - Rate analysis for R.C.C. slabs, columns and beams.
Module: 6 Tenders and contracts 3 hours
Tenders-Tender document - Cost & quality control - Contracts - Contracts - Types of contracts-
Arbitration and legal requirements
Module: 7 Valuation 3 hours
Valuation- Capitalized value - Depreciation - Value of building - Mortgage – Lease- Measurement
book, Stores. BOT & EPC - Case studies.

Module: 8 Contemporary issues 2 hours

Total Lecture hours 30 hours

B.TECH. (BCL) Page 133

Text Book (s)
1. Datta B.N. Estimating and costing, Charator Publishing House, 2012.
Reference Books
1. Kohli D.D and Kohli R.C, "Estimating and Costing", 12th Edition, S. Chand Publishers,
2014.
2. Vazirani V.N and Chandola S.P, “Estimating and costing", Khanna Publishers, 2015.
3. Rangwala, C. "Estimating, Costing and Valuation", Charotar Publishing House Pvt. Ltd.,
2015.
4. Duncan Cartlidge, "Quantity Surveyor’s Pocket Book", Routledge Publishers, 2012.
5. PWD Data Book.
6. CPWD Schedule of Rates (SoR).
7. Kohli D. D and Kohli R. C, "Estimating and Costing", 12th Edition, S. Chand Publishers,
2014.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 134

 L T P J C
CLE3002 BASICS OF STRUCTURAL DESIGN
2 2 2 0 4
Syllabus version
Pre-requisite CLE2003 – Structural Analysis
1.1
Course Objectives:
1. To understand the basic concepts of Limit state design
2. To obtain the knowledge of using Indian standard codes and special publication.
3. To know the design concepts of all the structural members and learn economical design for
materials saving
4. To know the design methodologies by limit state design for the beams, slabs, column and
footings
5. To know the connections in steel structures by rivets and bolts
6. To learn the design of structural members such as compression and tension members
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Apply the usage of IS codes in design of reinforced concrete structures
2. Identify the types and design of beams and slabs
3. Design the uniaxial and biaxial bending of column.
4. Design the simple footings and combined footings
5. Develop skills in design of different types of steel connections.
6. Design the compression and tension member
7. Design the built-up-beam section
Module: 1 Introduction to Limit State method 4 hours
Introduction - Concept of limit state method - Analysis and design of singly and doubly reinforced
rectangular and flanged beams.

Module: 2 Design of RC Slabs and Beams 4 hours

Design of different types of slabs - One way slab - two way slab – staircase

Module: 3 Design of RC Compression members 4 hours

Design of short column for axial load - uniaxial – Introduction to biaxial bending.

Module: 4 Design of RC Foundation 4 hours

Design of isolated and combined footing

Module: 5 Steel Sections and Types of Connections 5 hours

Introduction - properties of Rolled Steel Sections - permissible stress - Riveted and bolted
connections – permissible stresses, efficiency - design for axial and eccentrically loaded members.
Design of connections in tension members

B.TECH. (BCL) Page 135

Module: 6 Design of Tension and Compression members 3 hours
Types of sections – Net area – Net effective area of sections in tension –Slenderness ratio – Design
of single section and compound section of compression members.
Module: 7 Valuation 4 hours
Design of beams - simple and built-up beams - laterally supported and unsupported beams, concept
of shear. Plate and gantry girders – Flexural members.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.
Tutorial Class for Module 1
Tutorial Class for Module 2 30 hours
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7

Text Book (s)

1. Subramanian, N. "Design of Reinforced Concrete Structures", Oxford University Press, New
Delhi, 2013.
2. Subramanian, N. "Steel Structures - Design and Practice", Oxford University Press, 2011.
Reference Books
1. Devadoss Menon and Pillai S., "Reinforced Concrete Design", McGraw Hill Education India
Private Limited; 3rd edition 2009.
2. Raju N. Krishna, "Reinforced Concrete Design: Principles and Practice", CBS Publishers &
Distributors Pvt. Ltd., New Delhi, 2012.
3. Duggal, S. K, Limit State Design of Steel Structures, Tata McGraw-Hill Education, 2014.
4. IS 456: 2000 Plain and Reinforced Concrete - Code of Practice.
5. IS 800: 2007 General Constructions in Steel - Code of Practice.
Sl. No Laboratory Exercises L Hr.
RCC: Design of doubly reinforced beams 3 hours
Design of two way slabs 3 hours
1. Design of short columns. 3 hours
Design of combined footing 3 hours
Design of staircases 3 hours
2. STEEL: Design of Built up beams 4 hours

B.TECH. (BCL) Page 136

 Design of laterally supported and unsupported Beams 4 hours
Design of gantry girders 4 hours
Design of welded connections in framed structures 3 hours
30 hours

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 137

 APPLICATIONS OF DIFFERENTIAL AND L T P J C
MAT2002
DIFFERENCE EQUATIONS 3 0 2 0 4
Syllabus Version
Pre-requisite MAT1011 - Calculus for Engineers
1.0
Course Objectives
The course is aimed at
1. Presenting the elementary notions of Fourier series, which is vital in practical harmonic
analysis
2. Imparting the knowledge of eigen values and eigen vectors of matrices and the transform
techniques to solve linear systems, that arise in sciences and engineering
3. Enriching the skills in solving initial and boundary value problems
4. Impart the knowledge and application of difference equations and the Z-transform in discrete
systems, that are inherent in natural and physical processes
Course Outcome
At the end of the course the student should be able to
1. Employ the tools of Fourier series to find harmonics of periodic functions from the tabulated
values
2. Apply the concepts of eigen values, eigen vectors and diagonalisation in linear systems
3. Know the techniques of solving differential equations
4. Understand the series solution of differential equations and finding eigen values, eigen
functions of Strum-Liouville’s problem
5. Know the Z-transform and its application in population dynamics and digital signal
processing
6. Demonstrate MATLAB programming for engineering problems
Module: 1 Fourier series 6 hours

Fourier series - Euler’s formulae - Dirichlet’s conditions - Change of interval - Half range series –
RMS value – Parseval’s identity – Computation of harmonics
Module: 2 Matrices 6 hours
Eigenvalues and Eigen vectors - Properties of eigenvalues and eigen vectors – Cayley-Hamilton
theorem - Similarity of transformation - Orthogonal transformation and nature of quadratic form
Module: 3 Solution of ordinary differential equations 6 hours
Linear second order ordinary differential equation with constant coefficients – Solutions of
homogenous and non-homogenous equations - Method of undetermined coefficients – method of
variation of parameters – Solutions of Cauchy-Euler and Cauchy-Legendre differential equations
Solution of differential equations through Laplace transform and
Module: 4 8 hours
matrix method
Solution of ODE’s – Nonhomogeneous terms involving Heaviside function, Impulse function -
Solving nonhomogeneous system using Laplace transform – Reduction of nth order differential
equation to first order system - Solving nonhomogeneous system of first order differential equations
and

B.TECH. (BCL) Page 138

 Module: 5 Strum Liouville’s problems and power series Solutions 6 hours
The Strum-Liouville’s Problem - Orthogonality of Eigen functions - Series solutions of differential
equations about ordinary and regular singular points - Legendre differential equation - Bessel’s
differential equation
Module: 6 Z-Transform 6 hours
Z-transform-transforms of standard functions - Inverse Z-transform: by partial fractions and
convolution method
Module: 7 Difference equations 5 hours
Difference equation - First and second order difference equations with constant coefficients -
Fibonacci sequence - Solution of difference equations - Complementary function - Particular integral
by the method of undetermined coefficients - Solution of simple difference equations using Z-
transform
Module: 8 Contemporary Issues 2 hours
Industry Expert Lecture
Total Lecture hours 45 hours
Text Book(s)
1. Advanced Engineering Mathematics, Erwin Kreyszig, 10th Edition, John Wiley India, 2015.
Reference Books
1. Higher Engineering Mathematics, B. S. Grewal, 43rd Edition, Khanna Publishers, India,
2015.
2. Advanced Engineering Mathematics by Michael D. Greenberg, 2nd Edition, Pearson
Education, Indian edition, 2006.
Mode of Evaluation: Digital Assignments (Solutions by using soft skills), Continuous Assessment
Tests, Quiz, Final Assessment Test
1. Solving Homogeneous differential equations arising in engineering problems 3 hrs
Solving non-homogeneous differential equations and Cauchy, Legendre 3 hrs
2.
equations
3. Applying the technique of Laplace transform to solve differential equations 3 hrs
Applications of Second order differential equations to Mass spring system 3 hrs
4.
(damped, undamped, Forced oscillations), LCR circuits etc.
5. Visualizing Eigen value and Eigen vectors 3 hrs

6. Solving system of differential equations arising in engineering applications 3 hrs

Applying the Power series method to solve differential equations arising in 2 hrs
7.
engineering applications
Applying the Frobenius method to solve differential equations arising in 2 hrs
8.
engineering applications
9. Visualising Bessel and Legendre polynomials 2 hrs

10. Evaluating Fourier series-Harmonic series 2 hrs

B.TECH. (BCL) Page 139

 11. Applying Z-Transforms to functions encountered in engineering 2 hrs

12. Solving Difference equations arising in engineering applications 2 hrs

Total Laboratory Hours 30 hours

Mode of Evaluation: Weekly Assessment, Final Assessment Test
Recommended by Board of Studies 25.02.2017
Approved by Academic Council 47th AC Date 05.10.2017

B.TECH. (BCL) Page 140

 L T P J C
COMPLEX VARIABLES AND PARTIAL
MAT3003
DIFFERENTIAL EQUATION
3 2 0 0 4

Syllabus Version
MAT2002 Applications of Differential and
Pre-requisite
Difference Equations 1.1

Course Objectives:
The aim of this course is to present a comprehensive, compact and integrated treatment of two most
important branches of applied mathematics for engineers and scientists namely the functions of
complex variable and Partial differential equations in finite and infinite domains
Expected Course Outcome:
By the end of the course, the students are expected to
1. Construct analytic functions and find complex potential of fluid flow and electric fields
2. Find the image of straight lines by elementary transformations
3. Express analytic functions in power series
4. Evaluate real integrals using techniques of contour integration
5. Analyze partial differential equations, and its applications, design the boundary value
problems (one dimensional heat and wave equations) and find Fourier series, Fourier
transform techniques in their respective engineering problems
Module: 1 Analytic Functions 6 hours
Complex variable-Analytic functions and Cauchy – Riemann equations - Laplace equation and
Harmonic functions - Construction of Harmonic conjugate and analytic functions - Applications of
analytic functions to fluid-flow and Field problems.

Module: 2 Conformal and Bilinear transformations 5 hours

Conformal mapping - Elementary transformations-translation, magnification, rotation, inversion.

Exponential and Square transformations (w = ez, z2) - Bilinear transformation - Cross-ratio-Images
of the regions bounded by straight lines under the above transformations.

Module: 3 Power series 4 hours

Functions given by Power Series – Taylor and Laurent series – singularities – poles – Residues.

Module: 4 Complex Integration 5 hours

Integration of a complex function along a contour – Cauchy-Goursat theorem- Cauchy’s integral

formula -Cauchy’s residue theorem - Evaluation of real integrals - Indented contour integral.

Module: 5 Partial Differential equations of first order 6 hours

Formation and solution of partial differential equation - General, Particular, Complete and Singular
integrals - Partial Differential equations of first order of the forms: F(p,q)=0, F(z,p,q)=0,
F(x,p)=G(y,q) and Clairaut’s form - Lagrange’s equation: Pp+Qq = R.

B.TECH. (BCL) Page 141

Module: 6 Applications of Partial Differential equations 10 hours

Linear partial differential equations of higher order with constant coefficients. Solution of a
partial differential equation by separation of variables - Boundary Value Problems-one
dimensional wave and heat equations- Fourier series solution.

Module: 7 Fourier transforms 7 hours

Complex Fourier transform and properties - Relation between Fourier and Laplace transforms -
Fourier sine and cosine transforms – Convolution Theorem and Parseval’s identity.

Module: 8 Contemporary Issues 2 hours

Industry Expert Lecture

Total Lecture hours 45 hours

• A minimum of 10 problems to be worked out by students inventory
Tutorial Tutorial Class 30 hours
• Another 5 problems per Tutorial Class to be given as home work.

Text Book(s)

1. Erwin Kreyszig, Advanced Engineering Mathematics, 10th Edition, John Wiley & Sons
(Wiley student Edison) (2015)

Reference Books

1. B. S. Grewal, Higher Engineering Mathematics, 42nd Edition (2013), Khanna Publishers,

New Delhi
2. G. Dennis Zill, Patrick D. Shanahan, A first course in complex analysis with applications, 3rd
Edition, 2013, Jones and Bartlett Publishers Series in Mathematics:
3. Michael, D. Greenberg, Advanced Engineering Mathematics, 2nd Edition, Pearson Education
(2002)
4. Peter V. O’ Neil, Advanced Engineering Mathematics, 7th Edition, Cengage Learning (2011)
5. JH Mathews, R. W. Howell, Complex Analysis for Mathematics and Engineers, Fifth
Edition (2013), Narosa Publishers
Mode of Evaluation: Digital Assignments, Quiz, Continuous Assessments, Final Assessment Test.

Recommended by Board of Studies 16.08.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 142

 L T P J C
MAT3005 APPLIED NUMERICAL METHODS
3 2 0 0 4

Syllabus Version
MAT2002 – Applications of Differential and
Pre-requisite
Difference Equations
1.1

Course Objectives:

The aim of this course is to

1. Cover certain basic, important computer oriented numerical methods for analyzing problems that
arise in engineering and physical sciences.
2. Use MATLAB as the primary computer language to obtain solutions to a few problems that arise
in their respective engineering courses.
3. Impart skills to analyse problems connected with data analysis
4. Solve ordinary and partial differential equations numerically
Expected Course Outcome
At the end of the course the student should be able to
1. Observe the difference between exact solution and approximate solution.
2. Use the numerical techniques to find the solution of algebraic equations and system of
equations.
3. Fit the data using interpolation technique and spline methods.
4. Find the solution of ordinary differential equations, Heat and Wave equation numerically.
5. Apply calculus of variation techniques to extremize the functional and also find
approximate series solution to ordinary differential equations
Module: 1 Algebraic and Transcendental Equations 5 hours
General iterative method- rates of convergence- Secant method - Newton – Raphson method-System
of non-linear equations by Newton’s method.
Module: 2 System of Linear Equations and Eigen Value Problems 6 hours
Gauss –Seidel iteration method. Convergence analysis of iterative methods-LU Decomposition -Tri
diagonal system of equations-Thomas algorithm- Eigen values of a matrix by Power and Jacobi
methods.
Module: 3 Interpolation 6 hours
Finite difference operators- Newton’s forward-Newton’s Backward- Central differences-Stirling’s
interpolation - Lagrange’s interpolation - Inverse Interpolation-Newton’s divided difference-
Interpolation with cubic splines.
Module: 4 Numerical Differentiation and Integration 6 hours
Numerical differentiation with interpolation polynomials-maxima and minima for tabulated values-
Trapezoidal rule, Simpsons 1/3rd and 3/8th rules. –Romberg’s method. Two and Three point
Gaussian quadrature formula.

B.TECH. (BCL) Page 143

 Module: 5 Numerical Solution of Ordinary Differential Equations 8 hours
First and second order differential equations - Fourth order Runge – Kutta method. Adams-
Bashforth-Moulton predictor-corrector methods. Finite difference solution for the second order
ordinary differential equations.
Module: 6 Numerical Solution of Partial Differential Equations 6 hours
Classification of second order linear partial differential equations-Laplace equation –Gauss-Seidal
method-One dimensional heat equation- Schmidt explicit method-Crank-Nicolson implicit method.-
One dimensional wave equation–Explicit method.
Module: 7 Vibrational Methods 6 hours
Introduction to calculus of variations -Definition of functional - Extremals of functional of a single
dependent variable and its first derivative-Functional involving higher order derivatives- Functional
involving several variables Isoperimetric problems-Galerkins method.
Module: 8 Contemporary Issues 2 hours
Industry Expert Lecture

Total Lecture hours 45 hours

• A minimum of 10 problems to be worked out by students in every

Tutorial Tutorial Class. 30 hours
• Another 5 problems per Tutorial Class to be given for practise.
Text Book(s)
1. M. K. Jain, S. R. K. Iyengar and R. K. Jain, Numerical Methods for Scientific and
Engineering, New Age International Ltd., 6th Edition, 2012.
2. C. F. Gerald and P.V. Wheatley Applied Numerical Analysis, Addition-Wesley, 7th Edition,
2004.
Reference Books
1. S.S. Sastry, Introductory Methods of Numerical Analysis, PHI Pvt. Ltd., 5th Edition, New
Delhi, 2009.
2. W.Y. Yang, W. Cao, T.S. Chung and J. Morris, Applied Numerical Methods Using
MATLAB, Wiley India Edn., 2007.
3. Steven C. Chapra and Ra P. Canale, Numerical Methods for Engineers with Programming
and Software Applications, 7th Edition, Tata McGraw Hill, 2014.
4. R.L. Burden and J. D. Faires, Numerical Analysis, 4th Edition, Brooks Cole, 2012.
Mode of Evaluation: Digital Assignments, Continuous Assessment Tests, Final Assessment Test
Recommended by Board of Studies 25.02.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 144

 L T P J C
MEE1001 ENGINEERING DRAWING
1 0 4 0 3

Syllabus version
Pre-requisite Nil
1.0

Course Objectives:
1. Understand and escalate the importance of basic concepts and principles of Engineering
Drawing (components, sections, views, and graphical representation).
2. Enable the students with various concepts like dimensioning, conventions and
standards related to working drawings in order to become professionally efficient.
3. Develop the ability to communicate with others through the language of technical drawing and
sketching.
4. Ability to read and interpret engineering drawings created by others.
5. Ability to draw orthographic projections and sections.
6. Develop an understanding for size specification procedures and use of SI and traditional units of
linear measure.
Expected Course Outcome:

Upon successful completion of the course the students will be able to

1. Apply BIS and ISO Standards in Engineering Drafting.
2. Graphically construct mathematical curves in engineering applications.
3. Visualize geometrical solids in 3D space through Orthographic Projections
4. Construct isometric scale, isometric projections and views.
5. Draw sections of solids including cylinders, cones, prisms and pyramids.
6. Draw projections of lines, planes, solids, isometric projections and sections of solids including
cylinders, cones, prisms and pyramids using Mini-Dafter and CAD.
7. Construct orthographic projections from pictorial views.

Module: 1 Lettering and Dimensioning 1 hour

Introduction, lettering practice, Elements of dimensioning - systems of dimensioning.

Module: 2 Geometric Constructions 2 hours

Free hand sketching, Conic sections, Special curves.

Module: 3 Projection of Points and Projection of Lines 3 hours
Projection of Points: First and Third Angle Projections; Projection of points.
Projection of Lines: Projection of straight lines (First angle projection only); Projection of lines
inclined to one plane and both planes, true length and true inclinations.

Module: 4 Projection of Solids and Section of Solids 3 hours

Projection of solids: Classification of solids, Projection of solids in simple position, Projection of
solids inclined to one plane.
B.TECH. (BCL) Page 145
 Sections of Solids: Right regular solids and auxiliary views for the true shape of the sections.

Module: 5 Development of Surfaces 2 hours

Development of surfaces for various regular solids.
Module: 6 Isometric Projection and Perspective Projection 2 hours
Isometric Projection: Isometric scales, Isometric projections of simple and combination of solids;
Perspective Projection: Orthographic representation of a perspective views – Plane figures and
simple solids - Visual ray method.
Module: 7 Orthographic Projection 1 hour
Conversion of pictorial view into orthographic Projection.
Module: 8 Contemporary issues 1 hour
Total Lecture hours 15 hours

Text Book(s)
1. Venugopal K and Prabhu Raja V, “Engineering Graphics”, New AGE International
Publishers, 2015.
Reference Books

1. N. D. Bhatt, Engineering Drawing, Charotar publishing House, 2012.

2. Natarajan, K. V., A Text book of Engineering Graphics, Dhanalakshmi Publishers, 2012.

Mode of Evaluation: CAT / Assignment / Quiz / FAT / Project / Seminar

List of Challenging Experiments (Indicative) to be done using both Manual and CAD tools.

Identifying the incorrect dimensioning and correct it as per BIS standards for
1. 4 hours
Engineering Components.

2. Tutorials on free hand sketching of the plan view of stadium, garden, etc., 4 hours

Tutorials on geometric constructions like conics and special curves for

3. 4 hours
projection of cricket ball, missile projection, etc.,
4. Representation of orthographic projection of points 4 hours
Representation of orthographic projection of lines (First angle projection
only) inclined to one plane and projection of lines inclined to both the
5. 12 hours
planes- solving problems like electrical bulbs hanging from the roof, finding
the shortest distance between fan to electrical switch board, etc.,
Sketching orthographic projection of solids in simple position and projection
6. 8 hours
of solids inclined to one plane for household accessories and objects.
Drawing the auxiliary views, orthographic views and true shape of sectioned
7. 4 hours
regular solids for household accessories and objects.
Development of lateral surfaces of the regular shapes and sectioned shapes
8. 4 hours
for water cans, refrigerator, cylinder container, funnel, etc.,

B.TECH. (BCL) Page 146

 Conversion of orthographic views to isometric views for engineering
9. 8 hours
components.
Tutorial problems on perspective projection of plane figures and simple
10. 4 hours
solids for train with track, landscape, etc.,
Conversion of pictorial drawing into orthographic projection for engineering
11. 4 hours
components, architectural structures, etc.,
Total Laboratory Hours 60 hours
Recommended by Board of Studies 17.08.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 147

 L T P J C
MEE1002 ENGINEERING MECHANICS
2 2 0 0 3

Syllabus version
Pre-requisite Nil
1.1

Course Objectives:

1. To enable students to apply fundamental laws and basic concepts of rigid body mechanics to
solve problems of bodies under rest or in motion.
2. To enable the students to apply conditions of static equilibrium to analyse physical systems.
3. To compute the properties of areas and bodies.
Expected Course Outcome:
Upon successful completion of the course the students will be able to
1. Compute the resultant of system of forces in plane and space acting on bodies.
2. Predict the support-reactions and the internal forces of the members of various trusses and frames.
3. Analyse equilibrium problems with friction.
4. Apply transfer theorems to determine properties of various sections.
5. Analyse equilibrium of connected bodies virtual work method.
6. Predict motion parameters of bodies under rectilinear, curvilinear and general plane motion.
Module: 1 Basics of Statics 5 hours
Fundamental Principles - Coplanar forces - Resolution and Composition of forces and equilibrium of
particles - Forces of a particle in space - Equivalent system of forces - Principle of transmissibility -
Single equivalent force - Free body diagram - Equilibrium of rigid bodies in two dimensions and
three dimensions
Module: 2 Analysis of Structures 4 hours
Types of supports and their reactions - Plane trusses and frames - Analysis of forces by method of
joints and method of sections

Module: 3 Friction 3 hours

Characteristics of dry friction – simple contact friction – Wedges and Ladder friction

Module: 4 Properties of Surfaces and Solids 4 hours

Centroid - First moment of area – Second moment of area – Moment and product of inertia of plane
areas – Transfer Theorems - Polar moment of inertia – Principal axes – Mass moment of inertia

Module: 5 Virtual Work 4 hours

Virtual work – Principle of virtual work – System of connected rigid bodies – Degrees of freedom –
Conservative forces – Potential energy – Potential energy criteria for equilibrium.

B.TECH. (BCL) Page 148

Module: 6 Kinematics 4 hours
Displacements, Velocity and Acceleration – Rectilinear motion – Curvilinear motion – Tangential
and Normal components – Radial and Transverse components.
Module: 7 Energy and Momentum Methods 4 hours
Principle of work and energy for a particle and a rigid body in plane motion – Conservation of energy
- Principle of impulse and momentum for a particle and a rigid bodies in plane motion – Conservation
of momentum.

Module: 8 Contemporary issues 2 hours

Total Lecture hours 30 hours

Text Book(s)
1. Beer, Johnston, Cornwell and Sanghi (2013) Vector Mechanics for Engineers: Statics and
Dynamics, 10th Edition, McGraw-Companies, Inc., New York.
Reference Books

1. Russell C Hibbeler and Ashok Gupta (2010), Engineering Mechanics: Statics and Dynamics
(11th Edition), Published by Pearson Education Inc., Prentice Hall.
2. Meriam J.L and Kraige L.G. (2012) Engineering Mechanics, Volume I - Statics, Volume II -
Dynamics, 7th Edition, John Wiley & Sons, New York.
3. Rajasekaran S and Sankarasubramanian G (2013), Fundamentals of Engineering Mechanics,
3rd Edition, Vikas Publishing House Pvt. Ltd., India.
Mode of Evaluation: CAT / Assignment / Quiz / FAT / Project / Seminar
Recommended by Board of Studies 17.08.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 149

 L T P J C
MEE1004 FLUID MECHANICS
2 2 2 0 4
Syllabus version
Pre-requisite NIL
1.1
Course Objectives:
1. To apply hydrostatic law, principle of mass and momentum in fluid flows, concepts in Euler’s and
Bernoulli equations.
2. To provide fundamental knowledge of fluids, its properties and behaviour under various conditions
of internal and external flows.
3. To determine the losses in a flow system, flow through pipes, boundary layer concepts.
Expected Course Outcome:
Upon successful completion of the course the students will be able to
1. Analyse various hydraulic systems by applying the fundamental laws of fluid statics.
2. Solve the fluid flow governing equations by taking suitable constraints and assumptions
3. Evaluate major and minor losses in pipes
4. Analyse the practical significance of open channel flows
5. Perform dimensional analysis on any real life problems
6. Interpret the boundary layer aspects of laminar and turbulent flows
7. Experimentally determine the fluid properties and flow parameters using various experimental
setups.
Module: 1 Introduction to Fluid Statics 4 hours
Definition of fluid, Concept of continuum, Fluid properties, Classification of fluids, Pascal’s and
Hydrostatic Law, Pressure and its variation in a static Fluid, Measurement of static fluid pressure:
Manometers
Module: 2 Hydrostatic Forces and Buoyancy 4 hours
Hydrostatic forces on Plane –Inclined and Curved surfaces, Buoyancy, Condition of Equilibrium for
Submerged and Floating Bodies, Centre of Buoyancy, Metacentre–Determination of Metacentric
Height.
Module: 3 Fluid Kinematics and Dynamics 6 hours

Fluid kinematics: Description of fluid motion – Lagrangian and Eulerian approach, Types of flows,
Control volume, Material derivative and acceleration, Streamlines, pathlines and streaklines, Stream
function and velocity potential function, Reynolds transport theorem
Fluid dynamics: Continuity equation, Euler and Bernoulli’s equations – orifice meter, venturimeter,
Momentum equation, Application of momentum equation – forces on curved pipes, Navier–Stokes
Equations.
Module: 4 Flow through pipes 4 hours
Measurement in pipe flow-Major loss, Darcy–Weisbach equation, Moody’s diagram, Minor losses,
Multi reservoir problems, pipe network design, Hagen Poiseuille equation, Turbulent flow.
B.TECH. (BCL) Page 150
Module: 5 Open channel flow 3 hours
Types of open channel flows, Specific Energy, Specific force, Critical flow, Hydraulic jumps/Surges
and gradually varying flow concepts, Measurement of discharge in open channels.
Module: 6 Dimensional Analysis 3 hours
Dimensional homogeneity, Raleigh’s method, Buckingham π theorem, Non-dimensional numbers,
Model laws and distorted models, Modelling and similitude
Module: 7 Boundary layer flow 4 hours
Boundary layers, Laminar flow and turbulent flow, Boundary layer thickness, Momentum integral
equation, Drag and lift, Separation of boundary layer, Methods of preventing the boundary layer
separation
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorials
• Minimum of 10 problems to be worked out by students in every 2 hours of tutorial
Class per week
• Another 5 problems per tutorial class to be given as home work.
• The topics in each module will be given as follows
Module 1: 4 hrs 30 hours
Module 2: 4 hrs
Module 3: 6 hrs
Module 4: 4 hrs
Module 5: 4 hrs
Module 6: 4 hrs
Module 7: 4 hrs
Text Book(s)
1. Robert W. Fox, Alan T. McDonald, Philip J. Pirtchard John W. Mitchell (2015), Introduction to
Fluid Mechanics, 9th Edition, Wiley Publications.
Reference Books
1. P. N. Modi and S. M. Seth (2011), Hydraulics and Fluid Mechanics including Hydraulic
Machines, 17th Edition.
2. Yunus A. Çengel, John M. Cimbala (2013) Fluid Mechanics: Fundamentals And Applications,
McGraw-Hill, 3rd Edition.
3. Dr. R. K. Bansal, (2012), A Textbook of Fluid Mechanics and Hydraulic Machines, 5th Edition,
Laxmi Publication.
4. Donald F. Elger, Barbara C. Williams, Clayton T. Crowe, John A. Roberson (2013) Engineering
Fluid Mechanics, John Wiley & Sons, 10th Edition.
5. V. L. Streeter, (2010), Fluid Mechanics, McGraw Hill Book Co.
Mode of Evaluation: CAT / Assignment / Quiz / FAT / Project / Seminar
List of Challenging Experiments (Indicative)
1. Estimation of discharge from a given tank using orifice (constant head method) 3 hours
2. Estimation of discharge from a given tank using mouthpiece (variable head method) 3 hours

B.TECH. (BCL) Page 151

3. Determination of discharge in an open channel using rectangular Notch 3 hours
4. Determination of discharge of a given pipe flow using venturimeter 3 hours
5. Determination of discharge of a given pipe flow using orifice meter 3 hours
6. Estimation of friction factor and major loss for a given flow system 3 hours
7. Estimation of minor losses for a given pipe line 3 hours
8. Determination of state of flow in a closed conduit using Reynold’s experiment 3 hours
Verification of conservation of energy principle for a given flow system using
9. 3 hours
Bernoulli’s Theorem
10 1.5 hours
Estimating the flow rate in a pipe line using water meter
.
11 Study and calibration of a pitot static tube 1.5 hours
Total laboratory hours 30 hours
Mode of assessment: CAT / Assignment / Quiz / FAT / Project / Seminar
Recommended by Board of Studies 17.08.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 152

 NATURAL DISASTER MITIGATION AND L T P J C
CLE1010
MANAGEMENT 3 0 0 0 3
Syllabus version
Pre-requisite NIL
1.0

Course Objectives:

1. To understand the types of natural disasters and its causes.

2. To provide adequate knowledge about disaster mitigation, preparedness, response and
recovery to face disaster among government bodies, institutions, NGO’s, etc
3. To study the principle of natural disasters and geological natural disaster.
4. To obtain the knowledge of disaster management in mountainous regions and its early
warning systems.
5. To develop skills in Mitigation and Preparation of Meteorological and Climatological natural
disaster.
6. To provide adequate knowledge about applications of space technology in disaster
monitoring and information dissemination.
7. To know the community based disaster management.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the types of natural disasters and its causes.
2. Understand the measures to be taken before a disaster strikes.
3. Understand the principle of natural disasters.
4. Develop skills in disaster management in mountainous regions and reduce damages from
future disasters.
5. Examine the mitigation and preparation of meteorological and climatologically natural
disaster.
6. Understand the applications of space technology in disaster monitoring and information
dissemination.
7. Learn about the community based disaster management.
Module: 1 Introduction 6 hours
Natural Disasters around the world- Natural Disaster Risk Assessment- Earth and its characteristics
– Environmental Change and Degradation - Climate Change - Global warming – Human
Dimensions of Global environment Change
Module: 2 Disaster Preparedness 7 hours
Disaster mitigation, preparedness, response and recovery- comprehensive emergency management
Early warning systems and Disaster Preparedness– Rehabilitation, Vulnerable Populations -
Logistics and Services, Food, Nutrition and Shelter -Role of UN Red cross and NGOs.
Module: 3 Principles 5 hours
Natural Disasters -Principles, Elements, and Systems - Geological- Geomorphological, aspects, -
Earthquake-Geology, Seismology, Characteristics and dimensions

B.TECH. (BCL) Page 153

Module: 4 Landslides 3 hours
Human impact on the mountainous terrain and its relationship with Rainfall, liquefaction etc-
Tsunami - Nature and characteristics - Monitoring landslides- Landslide Early warning System
Module: 5 Oceanic, Atmospheric and Hydrologic cycles 6 hours
Severe Weather & Tornadoes , Cyclones, Floods and Droughts - Global Patterns - - Mitigation &
Preparation – Drought – Famine- nature and dimensions – Drought Assessment and Monitoring.
Module: 6 Mapping 8 hours
Modelling, risk analysis and loss estimation – Natural disaster risk analysis - prevention and
mitigation - Applications of Space Technology (Satellite Communications, GPS, GIS and Remote
Sensing and Information /Communication Technologies ( ICT ) in Early warning Systems - Disaster
Monitoring and Support Centre– Information Dissemination – Mobile Communications etc.
Module: 7 Community and Social organizations 7 hours
Community based disaster management - Psychological effects after disasters - Socio Psycho care-
managing Stress - Education and Training – Establishment of capacity building among various stake
holders – Government - Educational institutions – Use of Multi-media knowledge products for self
education.
Module: 8 Contemporary issues 3 hours
Total Lecture hours 45 hours
Text Book (s)
1. Ghanshyam Singh and SandipBhandari, Disaster Management, Gullybaba Publishing
House (P) Ltd; 1 edition (2012), ISBN-13: 978-9381066492
Reference Books
1. Bhandari, R.K, Disaster Education and Management, A Joyride for Students, Teachers and
Disaster Managers, ISBN, 978-81-322-1565-3, XXVIII, 349, Springer India, 2014.
2. Brian Tomaszewski, Geographic Information Systems (GIS) for Disaster Management, December
19, 2014 by CRC Press, Textbook - 310 Pages - 148 B/W Illustrations, ISBN 9781482211689 -
CAT# K21688.
3. Harsh K. Gupta, Disaster Management, Indian National Science Academy, ISBN
8173714568, 788173714566, 2006 second Edition, 152 Pages.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 154

 L T P J C
CLE1011 ENGINEERING GEOLOGY
2 0 0 4 3

Syllabus version
Pre-requisite CLE1003 Surveying
2.0
Course Objectives:
1. To demonstrate the importance of Geology to take Civil Engineering decisions to solve the
earth related problems.
2. To introduce the fundamental of the engineering properties of earth materials for the use of
Civil Engineering constructions.
3. To develop quantitative skills and a frame work for solving Engineering Geological
problems.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Know about the various internal structures of earth and plate tectonic movements.
2. Characterize the engineering properties of rocks, minerals and soil.
3. Assess the natural occurring various geological hazards.
4. Use seismic and electrical methods to investigate the subsurface of the earth.
5. Develop a native construction plan to incorporate all relevant aspects of Geology in Civil
Engineering work.
6. Apply Remote Sensing and GIS knowledge to investigate the Geological structures

Module: 1 Earth Structure 4 hours

Relevance and importance of Engineering Geology of Civil Engineers, Internal structure of the
earth- Composition - Plate Tectonics

Module: 2 Minerals and Rocks 4 hours

Minerals, their physical properties - rock forming minerals, physical and engineering properties of
igneous, metamorphic and sedimentary rocks

Module: 3 Weathering and Soil Formation 3 hours

Rock decay and weathering, soil origin and formation – classification and its engineering
importance, slope stability

Module: 4 Geological Structures 4 hours

Geological Structures - Folds, Faults and Joints – Engineering Considerations involves Structures.

Module: 5 Geological Hazards 6 hours

Brief description on geological hazards -cause and formation of flood, cyclone, Volcano, Landslides
and earthquake – Remedial Measures. Geological Considerations for Dam Reservoirs, Tunnels and
Road construction

B.TECH. (BCL) Page 155

Module: 6 Ground Water 4 hours
Characteristic of ground water, hydrogeological cycle, types of aquifers, water level fluctuations,
surface and subsurface geophysical methods, groundwater contamination, harvesting of rainwater.
Module: 7 Remote Sensing and GIS 3 hours
Introduction to Remote sensing and Geographical Information System
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
J-component 60 hours
Challenging Projects for an individual or a group will be given based on the basic and the
advancements in the course contents.
Text Book (s)
1. Parbin Singh, Engineering & General Geology, S. K. Kataria and Sons- Delhi, 8th Edition,
(2010).
Reference Books
1. Garg, S. K., Physical and Engineering Geology, Khanna Publishers, New Delhi, (2010).
2. Dimitri, P. Krynine and William, P. Judd, Principles of Engineering Geology and
Geomechanics, CBS Publishers and Distributors, New Delhi, (2005).
3. Garg. S. K. (2004), Physical and Engineering Geology, Khanna Publishers. – Delhi.
4. Blyth – Edward Arnold F. G. H (1998), A Geology for Engineers, (7th Edition)
5. H. H. Reed and F. Rutly (1960), Elements of Mineralogy, Thomas Murby, London.
6. M. P. Billings (1972), Structural Geology, Prentice Hall, Eaglewood Cliffs.
7. David. K. Todd John Wily & Sons Inc, Ground Water Hydrology (2005), 3rd Edition, New
York.
Project Titles (J component)
Challenging projects for Individual or a group will be given based on the basic and advancements in
the course content

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 04.03.2016

Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 156

 L T P J C
CLE1013 ENVIRONMENTAL IMPACT ASSESSMENT
3 0 0 0 3
Syllabus version
Pre-requisite CHY1002 Environmental Science
1.1
Course Objectives:
1. To understand the basic concepts of EIA and its origin and also emphasis the role of
engineers in EIA
2. To know the legislations to be used for enforcement of environmental acts for good EIA
practices
3. To discuss the methods to be used in EIA
4. To know the impacts occurred to physical environment by the projects
5. To know the impacts occurred to biological environment by the projects
6. To know the impacts occurred to human resources by the projects
7. To draft a EIA for specific projects and understanding the mitigation and monitoring
methods
8. To get exposed to practical experience for drafting a EIA through consultant / Government
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the importance of EIA for the project execution
2. Understand the role of government in approving the projects and the laws to be enforced
3. Examine suitable methods in handling the data collected during the EIA processes
4. Assess the impacts that could occur for human resources by the project
5. Assess the impacts that could occur for physical environment by the project
6. Assess the impact that could occur for biological environment by the project
7. Mitigate, monitor and draft an EIA report
8. Differentiate theoretical concepts and practical applications of an EIA report
Module: 1 Environmental Impact Assessment (EIA) 7 hours
Introduction, Definitions and Concepts, Rationale and Historical Development of EIA–EIA for Civil
and Environmental Engineers–Environmental Impact Statement–Environmental Appraisal–
Environmental Impact Factors.
Module: 2 EIA Legislation 6 hours
Criteria and Standards for Assessing Significant Impact–Risk Assessment–Enforcements of
Environmental Acts, Rules and Regulations–Public Participation and Involvement.
Module: 3 EIA Methodology 9 hours
Defining Objectives of the Project–Consideration of Alternatives–Criteria for the Selection of EIA
Methodology–EIA Methods–Screening–Scoping–Predictive Models for Impact Assessment–
Mitigation, Monitoring, Auditing, Evaluation of Alternatives and Decision Making
Module: 4 Prediction and Assessment of Impacts on Physical Environment 6 hours
Geology –Soils – Minerals – Climate – Water Resources – Water Quality – Air Quality – Noise.

B.TECH. (BCL) Page 157

Module: 5 Prediction and Assessment of Impacts on Biological Environment 5 hours

Terrestrial Ecosystems – Wetland Ecosystems – Aquatic Ecosystems – Threatened and Endangered

Species.

Module: 6 Prediction and Assessment of Impacts on Human Resources 5 hours

Demographics – Economics – Land Use – Infrastructure – Archaeological and Historic – Visual –

Safety.

Module: 7 Impact mitigation and monitoring 5 hours

Mitigation and monitoring process of adverse impacts, Rehabilitation and public participation,
Drafting of EIS, Post monitoring and management (ISO 14000 series)

Module: 8 Contemporary issues 2 hours

Total Lecture hours 45 hours

Text Book (s)

1. Environmental Impact Assessment, Larry W. Canter, 1st Edition, McGraw-Hill, Inc., 1996
(ISBN: 0-07-009767-4).
2. ‘Handbook of Environmental Impact Assessment- Volume 1 & 2’ authored by Judith Petts,
Blackwell Science Ltd., 1999 (ISBN 0-632-04772-0; ISBN 0-632-04771-2).
Reference Books

1. ‘Environmental Impact Assessment: Practical Solutions to Recurrent Problems’ Edited by

David P. Lawrence, John Wiley & Sons, Inc., (2013).
2. ‘Environmental Impact Assessment: A Guide to Best Professional Practices’ Edited by
Charles H. Eccleston, CRC Press, 2011 (ISBN: 978-1-4398-2873-1).
3. ‘Methods of Environmental Impact Assessment’ Edited by Peter Morris and RikiTherivel,3rd
Edition, Routledge-Taylor & Francis Group, 2009 (ISBN: 0-203-89290-9).

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 158

 L T P J C
CLE1016 URBAN PLANNING
3 0 0 0 3
Syllabus version
Pre-requisite NIL
1.1

Course Objectives:
1. To introduce the history of town planning and its importance
2. To study the various steps involved in urban planning and to know the housing development
schemes
3. To learn the planning and management of different infrastructure facilities in a city
4. To understand the importance of public transport and non-motorized transport for a
sustainable city development
5. To know the importance of protecting the environment and natural resources in a city
6. To introduce the concept of smart cities in India
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Describe the importance of proper urban planning for a healthy city
2. Explain the steps involved in planning of a city using remote sensing and GIS
3. Describe housing development schemes
4. Plan and manage different infrastructure facilities in a city
5. Design public transport and non-motorized transport facilities for a city
6. Describe the importance of environment and natural resources in urban planning
7. Describe smart city developments in India and abroad and its various elements
Module: 1 Introduction 5 hours
History of Town Planning - Definitions and Objectives of Planning - Examples of planned and
unplanned cities - Retrofitting medieval towns and existing cities - Healthy city planning.
Module: 2 Basic Planning Methods 6 hours
Base map preparation - survey techniques - Analytical methods - region classification -
Demographic methods - population forecasting. Introduction of Remote sensing, GIS and GPS in
urban planning context - Regional planning
Module: 3 Housing Development 5 hours
Policies and schemes - Housing typologies - Housing for the poor and elderly - Housing finance
options –under privileged population management.
Module: 4 Infrastructure 6 hours
Planning and management of local streets, water supply, storm water drainage, municipal solid
waste management systems- New possibilities for recycling.
Module: 5 Transport And Mobility 7 hours
Costs of congestion - Public and Para-transit modes (taxis and autos) - Feeder systems for the use of
public transport - Non-motorized transport facilities - cycling and walking infrastructure - Integrated
public transport.
B.TECH. (BCL) Page 159
Module: 6 Environment And Public Health 5 hours
Environmental Quality - Sanitation - Physical and mental health challenges in urban and sub-urban
areas - Vulnerable population - Conserving natural resources
Module: 7 Smart Cities 8 hours
Smart city developments across the world - Specific priorities for Smart Cities in India - Leveraging
recent technologies in enhancing urban living: internet of things (IoT) - Recreation -Renewable
energy - Green corridors, green space and green buildings - Safety and security of urban population.
Module: 8 Contemporary issues 3 hours
Total Lecture hours 45 hours
Text Book (s)
1. Peter Hall, Mark Tewdwr-Jones, Urban and Regional Planning. Taylor & Francis, (2010).

Reference Books

1. Peter Hall, Cities of Tomorrow: An Intellectual History of Urban Planning and Design Since
1880. 4th Edition, Wiley-Blackwell, (2014).
2. Randall Crane and Rachel Weber, The Oxford Handbook of Urban Planning. Oxford
University Press, (2012).
3. Ian Bracken, Urban Planning Methods: Research and Policy Analysis. Routledge, Taylor &
Francis, (2009).
4. Harry T. Dimitriou, Ralph Gakenheimer, Urban Transport in the Developing World: A
Handbook of Policy and Practice. Edward Elger, USA, (2011).
5. Joy Sen., Sustainable Urban Planning. The Energy and Resources Institute, New Delhi,
India, (2013).
6. Russ Lopez., The Built Environment and Public Health. John Wiley & Sons, (2012).
7. Eddie N. Laboy-Nieves, Fred C. Schaffner, Ahmed Abdelhadi, Mattheus F.A. Goosen.
Environmental Management, Sustainable Development and Human Health. CRC Press,
Taylor & Francis, (2008).
8. Carol L. Stimmel, Building Smart Cities: Analytics, ICT, and Design Thinking. CRC Press,
Taylor & Francis, (2015).
9. Durganand Balsavar, Mahindra World City, Public Private Partnerships in Urban Planning,
Mapin Publishers, (2012).

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47rd ACM Date 05.10.2017

B.TECH. (BCL) Page 160

 L T P J C
CLE2007 ADVANCED CONCRETE TECHNOLOGY
3 0 2 4 5
Syllabus version
Pre-requisite CLE1007 – Construction Materials and Techniques
1.0
Course Objectives:
1. To understand the classification of cement, its manufacturing process and testing standards
of cement.
2. To know the various types of materials used to make concrete and their influence in
concrete.
3. To study the proportioning of concrete mix for different grades of concrete.
4. To obtain the knowledge of non-destructive tests on concrete.
5. To know the various types of special concretes, their properties and places where they are
used.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify the quality of cement by various testing methods as per standards.
2. Evaluate the workability of concrete in the field.
3. Compute the strength of hardened properties of concrete.
4. Evaluate the quality of concrete using NDT equipment
5. Design the required grade of concrete with the available materials and estimate the quantity
of material required for casting.
6. Classify the various durability properties of concrete.
7. Identify the different types of special concrete that can be used in structural application.
Module: 1 Concrete Ingredients 6 hours
ASTM classification of Cement - Manufacturing - Types of cement - Properties of Cement - Testing
of Cement - Fine aggregates and coarse aggregates- Properties and testing-process of hydration
Module: 2 Properties of Concrete 6 hours
Selection of materials for concrete - water cement ratio - Properties of fresh concrete - workability -
measurement of workability - Admixtures - process of various stages of concrete - Statistical and
quality control of concrete.
Module: 3 Mechanical properties of concrete 6 hours
Strength of concrete - gain of strength with age - testing of hardened concrete - Compressive
strength -Tensile strength - Flexural strength - modulus of elasticity of concrete - Stress and Strain
characteristics.
Module: 4 Non-destructive techniques 6 hours
Rebound hammer and ultrasonic Pulse Velocity test - Corrosion rebar test.
Module: 5 Mix Design 6 hours
Concrete mix design - concepts of mix design - variables in proportioning - Different methods of
mix design - Indian Standard method IS 10262.

B.TECH. (BCL) Page 161

Module: 6 Durability of concrete 6 hours
Permeability of concrete - Shrinkage-plastic shrinkage - drying shrinkage - Chemical attack -
Sulphate attack of concrete structures - chloride attack.
Module: 7 Special Concretes 6 hours
High performance concrete - high strength concrete, high density concrete - light weight concrete -
Fibre reinforced concrete - self-compacting concrete - Polymer concrete.
Module: 8 Contemporary issues 3 hours

Total Lecture hours 45 hours

Text Book (s)

1. Gambir M. L, Concrete Technology, Tata MC-Graw Hill-Education, 2013.
2. Shetty M. S., Concrete Technology, S. Chand & Company Ltd., 2010
3. Metha P. K, "Concrete: Microstructure, properties and Materials", McGraw-Hill, 2014.
Reference Books
1. Zongjin Li, Advanced Concrete Technology, John Wiley & Sons – 2011
2. IS: 12269-1987, Specification for 53 grade ordinary Portland Cement, BIS, New Delhi.
3. IS: 383 – 1970, Specification for Coarse and fine natural sources for Concrete, BIS, New
Delhi.
4. IS: 10262-2009, Concrete Mix Proportioning - Guidelines.

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Laboratory Exercises
Tests on various properties of the ingredients of concrete: Cement 4 hours
Tests on various properties of the ingredients of concrete: Fine aggregate 4 hours
Tests on various properties of the ingredients of concrete: Coarse aggregate 4 hours
Workability tests on concrete: Slump Cone test, Compaction factor test and
4 hours
Consistency test (VB Consistometer)
Mechanical properties of concrete: Casting of concrete cube, cylinder specimens,
4 hours
curing and testing.
Study on the fresh state properties of the special concrete: Self-Compacting
4 hours
concrete
Tests for assessing the performance of hardened concrete finding its Stress-strain
3 hours
relationship, Young's Modulus.
Non-destructive Testing: Existing Beam, column & slabs 3 hours
Total 30 hours
Sample project titles for J – Component
Sl. No. Project Titles L Hrs
1. Experimental study on mechanical properties of Steel fiber concrete 60 hrs.

B.TECH. (BCL) Page 162

 2. Comparative study on natural and synthetic fiber concrete
3. Experimental study on flexural behavior of light weight concrete
4. Rheological properties of Self compacting concrete
5. Flexural behavior of geo-polymer concrete
6. Durability study on geo-polymer concrete
7. Durability studies on bottom ash concrete
8. Creep and shrinkage studies on natural fiber concrete
9. Creep and shrinkage studies on synthetic fiber concrete
10. Durability studies on recycled aggregate concrete
11. Durability studies on self compacting concrete
12. Study the influence of chemical and mineral admixture on mechanical
properties of concrete
Recommended by Board of Studies 04.03.2016

Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 163

 L T P J C
CLE2008 CONSTRUCTION PLANNING AND MANAGEMENT
3 0 0 0 3

Syllabus version
Pre-requisite CLE1007 – Construction Materials and Techniques
1.1
Course Objectives:
1. To understand the principles of management and construction safety measures
2. To know the role of project manager and the Labour Welfare measures.
3. To write case studies of International projects and adapt project management practices to
meet the needs of stakeholders
4. To understand the procedures in accounts and stores during construction activities
5. To identify the rules involved in constructing network diagram of a project.
6. To analyse the network in a construction project using CPM and PERT Method
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Explain the principles of management and construction safety measures
2. Discuss the behavioral aspects of projects in terms of project manager and choose the
Labour Welfare measures
3. Explain the case studies of International projects and select project management practices
to meet the needs of stakeholders
4. Know the procedures adopted in accounts and stores during construction activities
5. Construct network diagram for activities involved in the construction project.
6. Compute critical path and floats for a given network diagram using CPM Method
7. Analyze the uncertainties in the project network using PERT method
Module: 1 Principles of Management 5 hours
Definition - Importance – Functions of Management - Relevance to government and Quasi
Government departments - Private Contractors - Contracting firms - Organizational structure.
Construction safety measures.
Module: 2 Construction Planning and Labour Welfare 8 hours
Collection of field data - Preliminary estimates - Approval and sanction of estimates - Budget
provisions - Relationships between management and labour - Problems - Labour legislations -
Minimum Wages act - Industrial Psychology - Safety procedures in construction.
Module: 3 Projects 7 hours
Tendering - Arbitration - International projects - Detailed Project Reports (DPR) / Build Own
Operate (BOO) / Build Own Operate Transfer (BOOT) Projects / Build Operate and Transfer (BOT)
- case studies.
Module: 4 Accounts and Stores 6 hours
Measurements of work - Checking - Types of bills - Mode of payment - Claims - Banking
settlements - Types of accounts - Cash book - Storing - Maintenance Inspection - Inventories -
Transfer of surplus and accounting of shortage stores - Procedures adopted in PWD and CPWD.

B.TECH. (BCL) Page 164

Module: 5 Network element and development of Network 7 hours
Introduction - Event - Activity - Dummy - Network rules - Graphical guidelines for network -
Common partial situations in network - Numbering the events - Cycles Problems - Planning for
network construction - Modes of network construction - Work breakdown structure Hierarchies.
Module: 6 CPM 5 hours
Introduction - Slack - Critical Path - Example problem - Activity time estimate - Earliest event time
- Latest allowable occurrence time - Combined tabular computations for TE and TL - Start and
finish time of activity - Float - Critical activity and Critical path - Problems.
Module: 7 PERT 5 hours
Introduction - Use of PERT - Time estimate - Frequency distribution - Mean, Variance and standard
deviation - Probability distribution - Expected time problem - Example problems.
Module: 8 Contemporary issues 2 hours

Total Lecture hours 45 hours

Text Book (s)

1. Chitkara, K. K “Construction Project Management Plan, Se (English) 2nd Edition, Tata

Mcgraw Hill Education Private Limited, 2010.
2. Sharma, J. L, “Construction Management and accounts” Satya Publications, 2013.
Reference Books
1. Prasad, L.M “Principles of Management”, Sultan Chand & sons, New Delhi, 2012.
2. Stephen Robbins, “Organizational Behavior”, Pearson Education, New Delhi, 2011.

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 165

 L T P J C
CLE2009 ADVANCED SOIL MECHANICS
2 2 0 0 3
Syllabus version
Pre-requisite CLE1004 – Soil Mechanics & Foundation Engineering
1.1
Course Objectives:
1. To understand the soil composition and structure
2. To learn the stress-strain relationship
3. To know about the slope stability and its analysis
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify the mineral and structure of clay
2. Evaluate effective stress in soil due to seepage
3. Determine consolidation settlement of structures built on clayey deposits
4. Evaluate the factors influencing stress path
5. Estimate factor of safety of a slope
6. Identify suitable scaling law for physical modelling

Module: 1 Soil Composition and Soil Structure 5 hours

Soil formation; Types of soils and their characteristics; Particle sizes and shapes; their impact on
engineering properties;
Soil structure; Clay mineralogy; Different types of bonding in clay minerals, Soil-air-water
interaction.
Module: 2 Seepage and Flow Nets 3 hours
Permeability; Seepage force and effective stress during seepage.
Laplace equations of fluid flow, Flow nets, Anisotropic and non-homogeneous medium, Confined
and Unconfined seepage.
Module: 3 Compressibility and Consolidation 3 hours
Stresses in soil from surface loads; Terzaghi's 1-D consolidation theory; Application in different
boundary conditions. Normally and Over consolidated soils; Compression curves; Secondary
consolidation. Radial consolidation; Settlement of compressible soil layers and Methods for
accelerating consolidation settlements.

Module: 4 Stress-Strain Relationship 3 hours

Stress state, Mohr's circle analysis and Pole, Principal stress space, Stress paths in p-q space;
Isotropic compression and pressure dependency, confined compression, large stress compression,
Drainage conditions.
Module: 5 Shear Strength of Soils 4 hours
Triaxial behaviour, stress state and analysis of UC, UU, CU, CD, and other special tests, Skempton
pore pressure parameters.

B.TECH. (BCL) Page 166

Module: 6 Stability of Slopes 4 hours
Stability analysis of infinite slopes; Finite slopes – Swedish circle method, Friction circle method
and Taylors stability chart; Methods for enhancing stability of unstable slopes.

Module: 7 Geotechnical Physical Modeling 6 hours

Physical modeling methods; Application of centrifuge modeling and its relevance to geotechnical
engineering; Centrifuge modeling of geotechnical structures.
Module: 8 Contemporary issues 2 hours

Total Lecture hours 30 hours

Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.

Tutorial Class for Module 1 30 hours

Tutorial Class for Module 2
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7

Text Book (s)

1. Das, B.M. Advanced Soil Mechanics. Taylor and Francis Group, London, Second edition,
(2013).

Reference Books
1. Wood, D. W., Geotechnical Modelling Spon Press, Taylor and Francis Group, London, First
edition, (2007).
2. Powrie, W., Soil Mechanics concepts and applications. Spon Press, Taylor and Francis
Group, London, Second edition, (2009).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 167

 L T P J C
CLE2010 GROUND IMPROVEMENT TECHNIQUES
2 0 0 4 3

Syllabus version
Pre-requisite CLE1004 – Soil Mechanics & Foundation Engineering
1.0

Course Objectives:
1. To understand the properties of various types of problematic soils
2. To give an overview of latest ground improvement techniques
3. To understand the problems related to soil and select the best suitable method for
improvement.
4. The concepts and the design principles involved in the various techniques
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify the problems in Expansive soils
2. Classify best suited stabilization method based on soil properties
3. Categorize the best suited technique based on the ground conditions
4. Design the various ground improvement techniques
5. Identify suitable dewatering technique based on groundwater table
Module: 1 Introduction 3 hours
Different types of problematic soils and their geological formation principles of treatment-loading.
Module: 2 Treatment of Loose Sands 5 hours
Compaction piles, dynamic compaction, vibroflot technique, controlled blasting for compaction.
Module: 3 Grouting Techniques 4 hours
Permeation grouting, Compaction technique, jet grouting, different varieties of grout materials,
grouting in difficult conditions.
Module: 4 Treatment of Expansive Soils 4 hours
Physical and chemical stabilization injection method, lime-columns.
Module: 5 Accelerated Consolidation Methods For Soft Clay Soils 4 hours
Sand drains, Pre-fabricated drains, and Stone columns
Module: 6 Geosynthetics 3 hours
Concepts -materials, Types and application of reinforced earth – Introduction to Geosynthetics -
geo-textiles-separation and road work – Case studies
Module: 7 Dewatering Techniques 5 hours
Introduction-Well points-Vaccum / electro osmatic methods

B.TECH. (BCL) Page 168

Module: 8 Contemporary issues 2 hours

Total Lecture hours 30 hours

Text Book (s)

1. Hausmann, H.R. "Engineering Principles of Ground Modification", McGraw-Hill Book

Company. 3rd Edition 2010.

Reference Books

1. P. Purushotamaraj “Ground Improvement Techniques”, Laxmi Publications (P) Ltd. 2016.

2. Gulati and Datta "Geotechnical Engineering", Tata McGraw Hill. 2017.
Sl.
Sample Projects for J component hours
No.
1. Stabilization of soft clays using admixtures.
2. Stabilization of expansive soils using chemical stabilization.
3. Analysis and behavior of stone columns using PLAXIS.
4. Use of synthetic fibres in soil stabilization.
5. Use of natural fibers in soil stabilization.
60 hours
6. Laboratory study on use of geosynthetics.
7. Consolidation studies using drains
8. Study on vacuum consolidation
9. Slope protection measures
10. Stability analysis of natural and man-made slopes

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 04.03.2016

Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 169

 L T P J C
CLE2011 SOIL DYNAMICS AND MACHINE FOUNDATION
2 2 0 0 3
Syllabus version
Pre-requisite CLE1004 – Soil Mechanics and Foundation Engineering
1.1
Course Objectives:
1. To understand the fundamentals of vibration
2. To learn the dynamic properties of soil
3. To analyze and design machine foundation
4. Understand the wave propagation and dynamic properties of soil
5. To understand soil modeling for cyclic loading
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Distinguish different types of vibrations and its response
2. Examine the wave propagation and dynamic properties of soil
3. Determine the dynamic properties of soil
4. Evaluate the soil modeling for cyclic loading
5. Understand the principle of vibration Isolation
6. Evaluate the stiffness and damping of shallow foundations
7. Analyze and design machine foundation

Module: 1 Fundamentals of Vibration 4 hours

Introduction, Sources of vibrations, Basics concepts of vibration, classification of vibrations,
Vibration analysis procedure, Simple harmonic motion. Undamped free vibration of SDOF systems
Damping: Linear, Non-linear damping, Equivalent viscous damping. Damped free vibration of
SDOF systems. Response of damped SDOF system under harmonic force and rotating unbalanced
force.
Module: 2 Wave Propagation in Elastic Medium 4 hours
Shear and Dilational waves, Rod waves – Natural frequencies and mode shapes, Rayleigh waves
and their significance in soil dynamics, attenuation of shear waves.

Module: 3 Dynamic soil properties 3 hours

Dynamic soil properties - Gmax, Gsec, Gtan, G/Gmax and damping. Factors affecting dynamic soil
properties.
Lab tests: Resonant column test, Bender element test, cyclic triaxial / simple shear / Torsional shear
tests
Field tests: Seismic reflection and refraction tests, Seismic crosshole and downhole tests,
SASW/MASW tests, Block vibration test, Cyclic Plate load test, SPT and DCPT.
Module: 4 Soil modeling for cyclic loading 6 hours
Linear viscoelastic model – stress-strain relationship – Kelvin model – Maxwell model. Nonlinear
stress-strain model – Hyperbolic model, Masing model, Ramberg-Osgood model.

B.TECH. (BCL) Page 170

Module: 5 Dynamic stiffness of shallow foundations 3 hours

Circular rigid mat foundation on elastic half space excited vertically, laterally, torsion or rocking –
Effective stiffness and damping of such systems.
Effect of foundation shape and embedment on stiffness and damping constants
Finite soil layer and depth to bedrock on system of rigid foundations
Module: 6 Vibration Isolation 3 hours
Principles of vibration isolation – Active and Passive Isolation, Methods of isolation, Design of
wave barriers.
Module: 7 Analysis and Design of Machine Foundations 5 hours
Block foundations for reciprocating engines and low speed rotary machines, Block foundations for
forge hammers and other impact machines, Frame foundations for high speed rotary machineries,
Spring mounted foundations.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.

Tutorial Class for Module 1

30 hours
Tutorial Class for Module 2
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)

1. Das B.M and Ramanna G.V., Principles of soil dynamics 2nd Edition, Cengage learning,
Stanford, USA, (2011).

Reference Books
1. K. G. Bhatia, Foundations For Industrial Machines, D-CAD Publishers, (2008).
2. Kramer, S. L., Geotechnical Earthquake Engineering, Pearson Education Inc., New Delhi,
(2010).
3. Prakash, S. and Puri, V. K., Foundation for machines: Analysis and Design, John Wiley &
Sons, New York, (2008).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 171

 L T P J C
CLE2013 ADVANCED FOUNDATION ENGINEERING
2 2 0 0 3
Syllabus version
Pre-requisite CLE1004 – Soil Mechanics and Foundation Engineering
1.1
Course Objectives:
1. To learn about advanced methods for soil exploration
2. To understand and design different types of foundations
3. To study the retaining walls and its design
4. To understand the concept of soil reinforcement and the design principles of reinforced
earthen structures
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify the suitable method for soil exploration
2. Design suitable shallow foundation based on soil characteristics as per IS standards
3. Design of a deep foundation as per standards
4. Design of gravity and cantilever walls
5. Design of sheet pile wall.
6. Analyze and Design of reinforced earth retaining wall
Module: 1 Advanced soil exploration methods 4 hours
Introduction, Cone penetration test, Pressuremeter test, Dilatometer test, Geophysical exploration
methods.
Module: 2 Shallow Foundations 4 hours
Introduction, Bearing capacity - correction factors, Eccentrically loaded foundations, closely spaced
foundations, bearing capacity of layered soils, combined footing.
Module: 3 Pile Foundation 5 hours
Methods of construction of bored cast-insitu pile, Pile installation, Laterally loaded piles and
different types of load tests on piles. Application of stress-wave theory.
Module: 4 Mat Foundation 4 hours
Introduction, rigid and flexible mat, Bearing capacity, Differential settlement, buoyancy raft,
structural design of mat foundations.
Module: 5 Well Foundations 4 hours
Types, components, construction methods, design methods (Terzaghi, IS and IRC approaches),
check for stability, base pressure, side pressure and deflection.
Module: 6 Retaining Walls 3 hours
Design of gravity and cantilever walls, design of cantilever and anchored sheet pile walls. Support
systems for flexible retaining walls – anchors, struts, construction methods, stability calculations.
Construction of diaphragm walls, barrettes, caissons, soldier piles and lagging.

B.TECH. (BCL) Page 172

Module: 7 Reinforced Earth 4 hours
Geotechnical properties of reinforced soil, shallow foundation on soil with reinforcement, retaining
walls with reinforcements, design considerations.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.

Tutorial Class for Module 1 30 hours

Tutorial Class for Module 2
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)
1. Swamisaran, Reinforced soil and its Engineering applications, I.K. International Pvt. Ltd.,
(2010).
Reference Books
1. Braja. M. Das. Principles of Foundation Engineering, 2011, Cengage Learning. 7th Edition,
(2010).
2. J. E. Bowles, Foundation Analysis and Design, McGraw-Hill Book Company, 5th Edition
(2013).
3. Purushothama Raj. Soil Mechanics & Foundation Engineering, darling Kindersley
publishing, (2011).

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 173

 L T P J C
CLE2014 GEOTECHNICAL EARTHQUAKE ENGINEERING
2 0 0 4 3
Syllabus version
Pre-requisite CLE1004 – Soil Mechanics and Foundation Engineering
1.0
Course Objectives:
1. To give an overview of ground motion
2. To understand the dynamic properties of soil and liquefaction phenomena
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify proper magnitude and intensity scales
2. Analyse the seismic hazard of a given site
3. Evaluate strong ground motion parameters
4. Estimate dynamic properties of soil such as shear wave velocity, shear modulus, coefficient
of elastic uniform compression
5. Assess the response of the site for given seismic input motion
6. Evaluate factor of safety against liquefaction of a given site and decide on suitability of the
site for construction
7. Identify suitable technique of ground improvement to mitigate seismic hazard
Module: 1 Introduction to Geotechnical Earthquake Engineering 3 hours
Seismic hazard Seismology and Earthquakes-Nature and types of earthquake loading-Wave
Propagation
Module: 2 Strong Ground Motion 4 hours
Introduction-Strong ground motion-Ground motion parameters-Estimation of ground motion
parameters-Spatial variability of ground motions
Module: 3 Seismic Hazard Analysis 4 hours
Introduction-Identification and Evaluation of Earthquake Sources-Deterministic Seismic Hazard
Analysis-Probabilistic Seismic Hazard Analysis
Module: 4 Dynamic properties of soil 5 hours
Dynamic soil properties- Factors affecting dynamic soil properties.
Lab tests: Cyclic triaxial / simple shear / Torsional shear tests
Field tests: Block vibration test, Cyclic Plate load test.
Module: 5 Liquefaction related Phenomenon 4 hours
Types of Liquefaction-Evaluation of Liquefaction hazard-Liquefaction Susceptibility-Initiation of
Liquefaction-Effects of Liquefaction
Module: 6 Site Response Analysis 4 hours
Ground Response Analysis - Linear, Equivalent linear and Non-linear approach- Site Classification

B.TECH. (BCL) Page 174

Module: 7 Soil Improvement 4 hours
Densification Technique-Reinforcement Techniques-Grouting Techniques-Drainage Techniques-
Verification of soil improvement
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Steven L. Kramer, “Geotechnical Earthquake Engineering”, Prentice Hall, (2013)

Reference Books

1. B. N. Das and Ramana, “Principles of Soil Dynamics”, Cangage Learning, 2nd edition (2011)
Project Titles (J component) Hrs.
Challenging projects for Individual or a group will be given based on the basic and
60hrs
advancements in the course content
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 175

 L T P J C
CLE2015 HYDRAULIC STRUCTURES AND MACHINERY
2 2 2 0 4
Syllabus version
Pre-requisite MEE1004 – Fluid Mechanics
1.1
Course Objectives:
1. To understand the working principles of turbines
2. To know the various types of pumps and its applications
3. To study the various structures designed for storage work and for the development of
irrigation system.
4. To obtain the knowledge of various modes of failure of hydraulic structure and its remedial
measures
5. To know the various types of cross drainage work and its applications
6. To study various types of dams and their factors governing their selection
7. To determine performance of Vanes, Turbines and Pumps.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Classify the turbines and explain design criteria based on water availability
2. Discuss the characteristics of centrifugal pump and reciprocating pumps
3. Identify different component in an head work and its use
4. Design the head work of an irrigation system
5. Design the drops, escapes and outlet for the canal system
6. Describe various storage zones in an reservoir
7. Calculate different types of forces acting on a dam and design it.
8. Ability to formulate and conduct experiments, and also to analyze and interpret data
Module: 1 Impact of Jet on Vanes and Turbines 5 hours
Impact of Jet on flat and curved vanes, Classification - Pelton Turbine, Francis Turbine, Kaplan
Turbine-Velocity Triangle, Characteristic Curves, Specific Speed -Governing of Turbines.
Module: 2 Strong Ground Motion 5 hours
Centrifugal Pump-Velocity triangle, characteristic curves, specific speed. Reciprocating pump –
Types – Indicator diagram-Acceleration and friction, air vessels.
Module: 3 Diversion Head work 5 hours
Weir and Barrage – Gravity and Non –gravity weir- Layout of a diversion head works and its
components – Under sluice –Divide wall- River training works- fish ladder
Module: 4 Theories of seepage and Design of weir 3 hours
Failure of hydraulic structure- Bligh’s creep theory – Lane’s weighted creep theory- Design of
Vertical drop weir on Bligh’s theory – Basic cutoff walls.
Module: 5 Regulators and Modules 3 hours
Canal regulation works –Distributary Head regulator and cross regulator- Types of canal escapes –
Types of outlets (Modules)- cross drainage works

B.TECH. (BCL) Page 176

Module: 6 Reservoirs 2 hours
Reservoir types- storage capacity, storage zones, Sedimentation- causes, effect & control measures.
Module: 7 Dams and Hydro- electric power structures 5 hours
Dams, factors governing their selection-Classification, Elementary design of gravity dam - - spill
ways, energy dissipators, spill way gates, Classification of hydel plants- Principal components of a
hydro-electric scheme- water hammer- remedies
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.
Tutorial Class for Module 1
Tutorial Class for Module 2 30 hours
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)
1. Bansal R. K, (2010) “Fluid mechanics and hydraulic machines” Lakshmi Publishers, New
Delhi.
2. Santosh Kumar Garg (2012) “Irrigation Engineering and Hydraulic Structures” Khanna
Publisher.
Reference Books
1. Das M. M Fluid Mechanics and Turbo machines, Prentice Hall of India (P) Ltd New Delhi,
(2012).
2. Arore, K. R Fluid Mechanics, Hydraulic and Hydraulic Machines, Standard Publishers and
Distributors, New Delhi, (2011).
3. PN Modi, “Irrigation water resources and water power engineering” standard book house
9thedition, (2011).
4. Dr J. F. Douglas , Dr J. M. Gasoriek, Prof John Swaffield, Lynne Jack, “Fluid Mechanics”
Pearson Fifth edition, (2010).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Laboratory
1. Statistical and error analysis of centrifugal pump 3 hours
2. Determine the flow ratio for jet impingement on vanes for different types of vanes 3 hours
3. Performance characteristics curve for pump in series and pump in parallel. 3 hours
4. Prediction of design head and design discharge of self-priming pump 3 hours
5. Determination slip of reciprocating pump 3 hours

B.TECH. (BCL) Page 177

 6. Performance of main characteristics of a Gear Pump 3 hours
7. Performance operating characteristics of a Submersible pump 3 hours
8. To determine iso-efficiency curves for Pelton turbine 3 hours
9. Load test on Francis Turbine 3 hours
10. Characteristics load test on Kaplan Turbine 3 hours
Total 30 hours

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 178

 L T P J C
CLE2017 HYDROLOGY
3 0 0 0 3
Syllabus version
Pre-requisite MEE1004 – Fluid Mechanics
1.1
Course Objectives:
1. To understand the physical processes that determines the exchange of water at the Earth's
surface.
2. To become familiar with the physical properties that govern the movement of water through
the unsaturated zone and how these can be observed in the field and modeled mathematically.
3. To understand the physical factors that control evaporation and their representation using
energy fluxes and diffusive transfer.
4. To be familiar with the various physical and empirical models used to calculate evaporation &
evapotranspiration and the data need to support their use.
5. To be able to understand the processes which influence runoff from catchments and the
methods for estimating the runoff
6. To use measured / estimated data like precipitation, runoff, infiltration, for hydrologic design
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the process and mathematical representation of hydrologic cycle
2. Differentiate the measure and apply precipitation for hydrologic design
3. Understand the importance of catchment characteristics for runoff estimation
4. Evaluate the hydrologic abstractions and also learn about the factors affecting various
hydrologic abstractions
5. Comprehend unit hydrograph theory and its applications to hydrologic design
6. Apply statistical tools to hydrologic data
7. Implementing the knowledge of precipitation and runoff measurement in hydrologic design
Module: 1 Introduction 5 hours
Hydrologic cycle, hydrologic system model, Water budget: analysis and synthesis, atmospheric
circulation.
Module: 2 Precipitation 8 hours
Formation of precipitation – types of precipitation – Precipitable water – Precipitation in a cloud
system - Rainfall measurement and characteristics – Estimating missing rainfall data – Rain gauge
consistency – Average annual rainfall – Development of a design storm – probable maximum
precipitation
Module: 3 Watershed Characteristics 5 hours
Watershed definition and delineation - Watershed geomorphology – channel geomorphology – travel
time estimation
Module: 4 Hydrologic Abstractions 6 hours
Infiltration: Definition and factors affecting infiltration – Infiltration Estimation: Horton’s model,
Green-Ampt Model, Infiltrometer, SCS Method. Evaporation and Transpiration: Definition, factors
B.TECH. (BCL) Page 179
affecting evaporation, methods for estimation of evaporation – EPT: Definition, estimation of EPT

Module: 5 Unit Hydrograph 8 hours

Sources of streamflow, streamflow hydrograph and hydrograph characteristics, excess rainfall and
direct runoff, Abstractions: Using infiltration indices and SCS method – Peak discharge
Unit hydrograph: Definition, Assumptions and Limitations, UH derivation and Application, S-
Hydrograph, Synthetic UH, UH for different rainfall durations
Module: 6 Frequency Analysis 5 hours
Return period, extreme value distributions, Frequency analysis using frequency factors, Probability
plotting – Risk Assessment
Module: 7 Hydrologic Design 5 hours
Design Storms: Design precipitation depth, IDF curves, Design precipitation hyetographs from IDF
curves, Calculation of probable maximum precipitation. Design Flows: Simulating design flows,
flood plain analysis, flood forecasting
Module: 8 Contemporary issues 3 hours
Total Lecture hours 45 hours
Text Book (s)
1. VenTe Chow, David R Maidment, Larry W. Mays, Applied Hydrology. McGraw Hill
International Editions, (2010)
2. Subramanya, Engineering Hydrology, Tata McGraw Hill Co., Graw Hill Co., (2010).
Reference Books
1. Hydrology and Water Resources Engineering, S.K. Garg, JBA publishers, (2015)
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 180

 INDUSTRIAL WASTES TREATMENT AND L T P J C
CLE2018
DISPOSAL 2 0 0 4 3
Syllabus version
Pre-requisite CLE1006 – Environmental Engineering
1.0

Course Objectives:

1. To provide an understanding of the industrial wastes treatment and disposal methods

2. To know the sources of various industrial wastes and its treatment methods
3. To understand the design and operation of disposal of industrial wastes
4. To know the various processes of wastewater treatment and its engineering requirements
5. To provide adequate knowledge about pollution phenomena of various industries including
gaseous pollutants.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Apply waste minimization concepts in managing the industrial wastes
2. Identify and justify the selection of various treatment methods for industrial wastewater
treatment
3. Understand concepts in industrial solid waste management
4. Implement the sophisticated wastewater supply technology
5. Execute solutions for biological treatment
6. Implement new techniques for collection, recycling and disposal of solid wastes and sludge
Module: 1 Sources and types of Industrial wastes 3 hours
Liquid, solid, and gaseous waste - effects of industrial effluents on streams, sewer, land, sewage
treatment plants and human health
Module: 2 Recent trends in Industrial waste management 3 hours
Cradle to Grave concept - life cycle analysis - clean technologies
Module: 3 Treatment of specific pollutants in industrial waste 4 hours
Fluoride – cyanide - Toxic organics - Heavy metals – Radioactivity
Module: 4 Liquid Waste Treatment 6 hours
Equalization – Neutralization – Modern treatment techniques: removal of suspended and dissolved
organic solids - Removal of dissolved inorganic solids
Module: 5 Industrial Solid Waste Treatment 6 hours
Physico-chemical treatment – solidification – incineration – Secured landfills – Legal Provisions
Module: 6 Gaseous pollutant treatment 3 hours
Absorption – scrubbing – catalytic oxidation – thermal treatment

B.TECH. (BCL) Page 181

Module: 7 Various Industrial Pollution Control 3 hours
Treatment processes of selected industries- textiles, tanneries, dairy, sugar, paper, distilleries, steel
plants, refineries, fertilizer and thermal power plants.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. V. V. Ranade, V. M. Bhandari, Industrial Wastewater Treatment, Recycling and Reuse, Elsevier
Publications, 2014.
2. W. Wesley Eckenfelder, Davis L. Ford, Andrew J. Englande, Industrial Water Quality, 4th
Ed. Tata McGraw 2009.
Reference Books
1. Patwardhan A. D, Industrial Waste Water Treatment, PHI Learning Private Limited-New
Delhi (2009).
2. Arcievala, S. J., “Wastewater Treatment for Pollution Control”, Tata McGraw Hill, (2006).
3. Nelson, L. Nemerow, Liquid Waste of Industry, Theories, Practices and Treatment,
Addison-Wesley Publishing Company, London, (2008).
Project Titles (J component) Hrs.
Challenging projects for Individual or a group will be given based on the basic and
60hrs
advancements in the course content.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 182

 L T P J C
CLE2019 POLLUTION CONTROL AND MONITORING
2 0 0 4 3

Syllabus version
Pre-requisite CLE1006 – Environmental Engineering
1.0
Course Objectives:
1. To understand the basic concepts of various types of pollution.
2. To understand the factors that must be satisfied for potable water, land and air for the removal
and treatment of pollutants.
3. To provide a strong link between the Pollution Damage, Public Authority Control Systems and
Technical Control Systems.
4. To know the relationship between social, legislative and biological constraints in a modern
developed society.
5. To know about the basics of the standards of noise pollution and methods to prevent air pollution.
6. To develop skills relevant to control the various types of pollution.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Develop a general understanding on types of various industrial pollutions and associated
problems.
2. Describe the principles of the biological and chemical treatment processes that are required to
ensure adequate quality and quantities of potable water.
3. Implement the principal techniques currently in use for wastewater treatment and to review
operational procedures for the plant involved.
4. Apply advanced methods for monitoring and modeling spatial and temporal patterns of pollution.
5. Identify sources, types, and control equipments for industrial air pollution.
6. Determine sources of water pollution, general water treatment, wastewater treatment and issues
pertaining water quality degradation.
7. Develop management techniques for degraded landforms due to industrial activities.

Module: 1 Pollution: An overview 4 hours

Pollution control regulations of India: water, air, noise, solid and hazardous waste- Agencies involved
and structure of implementation.
Module: 2 Water Pollution 4 hours
Natural process of self- purification in water- BOD consideration in streams – Oxygen Sag Curve-
pollution due to industrial, agricultural and municipal wastes- need of water pollution control.
Module: 3 DWWT and ZLD 3 hours
Concept of decentralized wastewater treatment (DWWT) and reuse.
Zero liquid discharge (ZLD) from industries and recycle.
Module: 4 Air Quality Control 4 hours
Air quality criteria and standards- Elements of regulatory and non-regulatory control-Strategies-Indoor
air quality.

B.TECH. (BCL) Page 183

Module: 5 Noise Pollution 4 hours
Environmental community noise- Measures for prevention and control of noise – Industrial noise and
control -Noise measurement and mapping-
Module: 6 Municipal Solid Waste Management 4 hours
Source characteristics – quantities – collection methods and disposal techniques – sanitary landfill –
incineration – and pyrolysis, composting- recycling and reuse.
Module: 7 Environmental Sanitation 4 hours
Personal Hygiene and Sanitary Food Handling-Rural and urban sanitation-Traditional and modern
methods.
Module: 8 Contemporary issues 3 hours
Total Lecture hours 30 hours

Text Book (s)

1. Peavy, H.S., Rowe, D.R and George Tcnobanoglous, Environmental Engineering, Mc-Graw Hill
company, New Delhi, (2010).
2. Rao C. S., Environmental Pollution Control Engineering, Wiley Eastern Ltd., New Delhi, (2007).
Reference Books
1. Environmental Pollution Monitoring and Control, S. M. Khopkar, New age International (P) Ltd.
publishers, (2010).
2. Environmental Pollution and Control, P. R. Trivedi, JBA publishers, (2008).
3. Environmental Pollution and Control in Chemical Process Industries, S. C. Bhatia, JBA
publishers 2nd Edition, Reprint (2014).
Sl.
Sample projects for J component Hrs.
No.
Study the water pollution status of India/states and identify the sources of
1.
pollution and suggest the appropriate water pollution control measures.
2. Studies and report preparation of DWWT practiced in a community
3. Studies and report preparation of ZLD practiced in an industry
4. Ambient air quality monitoring of a selected site
5. Development of air quality index of a selected town / city (60 hours)
6. Studies and report preparation of air pollution control in an industry
7. Studies and report preparation of noise pollution control in an industry
8. Studies and report preparation of noise pollution control in National Highways
Studies and report preparation of solid waste management practiced in a
9.
community
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 184

 L T P J C
CLE2020 SOLID WASTE MANAGEMENT
2 0 0 4 3

Syllabus version
Pre-requisite CLE1006 – Environmental Engineering
1.0
Course Objectives:
1. Gain insight into the collection, transfer, and transport of municipal solid waste.
2. Learn the concept of designing and operation of a municipal solid waste landfill.
3. Understand the design and operation of a resource recovery facility.
4. Realize the design and operation of a waste‐to‐energy facility.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the characteristics of the municipal solid waste
2. Understand the functional element of municipal solid waste management.
3. Understand the separation and processing of municipal solid waste.
4. Know the concept of different alternatives of waste to energy conversation.
5. Design and operate sanitary landfill
Module: 1 Municipal Solid Waste Management: An Overview 6 hours
Definition of solid waste –major legislation, monitoring responsibilities, Effects of improper disposal
of solid wastes – public health effects
Sources and types of solid waste – sampling and characterization – Determination of composition of
MSW – storage and handling of solid waste.
Collection and Transport of Solid Waste: Waste collection systems– alternative techniques for
collection system. Need for transfer operation, transport means and methods.
Module: 2 Municipal solid waste treatment: Materials Recovery 4 hours
Unit operations for separation and processing, Materials Recovery facilities on site/off site,
Composting process
Module: 3 Municipal Solid waste treatment: Energy Recovery 3 hours
Anaerobic digestion, RDF and Incineration and co-generation of energy using waste, Pyrolysis of solid
waste
Module: 4 Disposal of municipal Solid wastes 5 hours
Dumping of solid waste; sanitary landfills – site selection, design and operation of sanitary landfills –
Leachate collection & treatment
Module: 5 Recyclable solid waste materials for civil engineering applications 3 hours
Construction debris, fly ash, gypsum, red mud, blast furnace slag; e- waste.
Module: 6 Principles of solid and Hazardous waste management 2 hours
Principles of solid waste management, Definition and identification of hazardous wastes, cradle to
grave management concept, Prevailing laws of hazardous waste management- Risk assessment.

B.TECH. (BCL) Page 185

 Treatment and disposal of hazardous wastes (Biomedical waste,
Module: 7 5 hours
Industrial and nuclear waste)
Disinfection, autoclaving, incineration, Stabilization, Solidification, air stripping, oxidation,
bioremediation and any other appropriate techniques
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. George Techobanoglous et al, "Integrated Solid Waste Management ", McGraw‐ Hill
Publication, Latest edition,(2010).
2. Charles A. Wentz; "Hazardous Waste Management", McGraw‐Hill Publication, Latest
publication, (1992).
Reference Books
1. Handbook of Solid Waste Management by Frank Kreith, George Tchobanoglous, McGraw Hill
Publication, (2002).
2. Bagchi, A., Design, Construction, and Monitoring of Landfills, (2nd Ed). Wiley Interscience,
ISBN: 0‐471‐30681‐9.
3. Manual on Municipal Solid Waste Management, CPHEEO, Ministry of Urban Development,
Government of India, New Delhi, (2000).
Sl.
List of J sample project topics Hrs.
No.
1. Collection and characterization of solid and hazardous waste
2. Devise appropriate treatment options based on varying characteristics
60 hrs.
3. Route optimization studies for collection of solid waste
4. Economic appraisal of a selected waste management scheme
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 186

 L T P J C
ECONOMICS AND BUSINESS FINANCE FOR CIVIL
CLE2022
ENGINEERS 3 0 0 0 3

Syllabus version
Pre-requisite CLE1007 – Construction Materials and Techniques
1.0
Course Objectives:
1. To enables the Civil Engineering student to become an entrepreneur by understanding the
law of economics.
2. To ensure the students to apply different Methods of appraisal of projects and pricing
techniques apart from knowing about various Macroeconomics Model.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Know the Scope and Method of Managerial economics along with Fundamental Economics
and help them to develop a thorough understanding on engineering decision making.
2. Analyse the demand and supply adopting market strategy
3. Understand the production function and factors affecting it with various economy conditions
of the firm.
4. Study the different types of market structure and strategies
5. Examine behaviour of markets adopting game theory and pricing practices.
6. Understand the concepts of macroeconomics and obtain knowledge of government fiscal and
monetary policies.
7. Implement the of various macroeconomic models for markets.
8. Learn the computer applications in economics.
Module: 1 Introduction 5 hours
The Scope and Method of Managerial economics - Fundamental Economics concepts - Managerial
Economics with other subjects - Objectives of the Firm.
Module: 2 Demand and Supply Analysis 6 hours
Meaning, Types and Determinants - Demand estimation - Demand elasticities for decision making -
Business and Economic forecasting : Qualitative and Quantitative methods - Supply analysis:
Meaning, elasticities and determinants - Market equilibrium and price determination
Module: 3 Production Economics 6 hours
Production and Production function - Types - Estimation - Returns to Scale - Economies and Dis-
economies of Scale and Economies of Scope. Factor Inputs - Input-Output Analysis
Module: 4 Market Structure 6 hours
Perfect Competition - Imperfect Competition: Monopoly - Monopolistic - Oligopolistic Strategy,
Cartels, Cournot, Kinked Demand and Price Leadership.
Module: 5 Pricing Structure 7 hours
Oligopolistic Rivalry \& Theory of Games - Measurement of economic concentration - Policy
against monopoly and restrictive trade practices - Competition Law - Pricing Practices : Objectives -
Determinants - Pricing Methods - Government Policies and Pricing

B.TECH. (BCL) Page 187

Module: 6 Introduction to Macroeconomics 7 hours
Circular Flow of Income and Expenditures - Components of National Income and its significance -
Measuring Gross Domestic Product (GDP) - Inflation and Business Cycles - Government Fiscal and
Monetary Policy - Balance of payments - Foreign exchange markets
Module: 7 Macroeconomics Model 6 hours
Classical Model - Keynesian Cross Model - Investment Theory - Hybrid Model - IS-LM-BP Model
Module: 8 Contemporary issues 2 hours
Total Lecture hours 45 hours
Text Book (s)
1. Bose, D. C., “Fundamentals of Financial management”, 2nd ed., PHI, New Delhi, (2010).
2. Peterson, S. J., “Construction Accounting and Financial Management”, Pearson Education,
Upper Saddle River, New Jersey, (2015).
Reference Books
1. Jha, K. N., “Construction Project Management, Theory and Practice”, Pearson, New Delhi,
(2011).
2. Newnan, D. G., Eschenbach, T. G. and Lavelle, J. P., “Engineering Economic Analysis”,
Indian Edition, Oxford University Press, (2010).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 188

 L T P J C
CLE2023 GIS AND REMOTE SENSING
2 0 2 0 3

Syllabus version
Pre-requisite CLE1003 – Surveying
1.0
Course Objectives:
1. To understand the basic concepts of remote sensing.
2. To learn basic concepts of Geo-graphical Information Systems (GIS).
3. To know various applications of Remote Sensing and GIS applications in Civil Engineering
4. To know the importance of decision making system.
5. To understand the importance of Remote Sensing and GIS in Disaster Mitigation and
Management.
6. To understand the importance of digital elevation model (DEM) in various water resources
engineering applications.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Identify the Indian remote sensing satellites and their platforms
2. Present available GIS and Remote Sensing software like ARC GIS, QGIS and ERDAS
Imagine.
3. Develop Digital Elevation Model (DEM)
4. Develop Land use land cover analysis,
5. Generate spectral library
6. Understand the importance of GIS and Remote Sensing in Civil Engineering
Module: 1 Basic concepts of Remote Sensing 4 hours
Introduction to Remote Sensing, Electromagnetic Spectrum and radiation, Remote Sensing
Platforms, Satellite Sensors, Orbits in Remote Sensing
Module: 2 Sensors and Scanning Systems 4 hours
Indian Remote Satellites (IRS), Spectral characteristics earth surface features i.e, vegetation, water
and soil, Understanding the spectral curves to create spectral library
Module: 3 Digital Image processing 5 hours
Elements of image interpretation , Concepts of digital image processing, Image registration, Feature
extraction techniques, Image classification, Landuse and landcover analysis
Module: 4 Basic concepts of GIS 4 hours
Introduction to GIS, History of development of GIS, Elements of GIS - Computer hardware and
software, Map reading, various maps in GIS
Module: 5 Spatial Analysis tools 4 hours
Map overlay operations, Vector and Raster data model, Data storage and database management,
Spatial data analysis techniques
Module: 6 Introduction and Principles of Photogrammetry 4 hours
Type of Photogrammetry, Stereoscopic Instruments / views, Vertical Photography, Ortho-photos,
Oblique Photographs, Topographic Mapping , Digital Elevations/ Terrain Modelling
B.TECH. (BCL) Page 189
Module: 7 Applications of remote sensing and GIS 3 hours
Application of remote sensing and GIS in Civil Engineering, Case studies
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Basudeb Bhatta, Remote Sensing and GIS, Oxford University Press, New Delhi, Second
Edition, (2012).
Reference Books
1. Thomos Lillesand, Ralph W. Kiefer and Jonathan Chripman, Remote Sensing and Image
Interpretation, Wiley Publisher, 7th Edition, (2015).
2. Peter A. Burrough, Rachael A. McDonnell and Christopher D. Lloyd, Oxford University
Press, 3rd Edition, (2015).
3. Kang-tsung Chang, Introduction to Geographic Information Systems, McGraw-Hill
Education; 8th Edition, (2015).
4. G S Srivastava, An Introduction to Geoinformatics, McGraw Hill Education (India) Private
Limited, (2014).
5. Paul Wolf, Bon DeWitt and Benjamin Wilkinson, Elements of Photogrammetry with
Application in GIS, McGraw-Hill Education; 4th Edition, (2014).
Laboratory Exercises hours
1. Image Registration (Image to Image, Image to Map). 2 hours
2. Image Subset / Clipping. 2 hours
3. Spectral Signature of various land features. 2 hours
4. Image Classification from satellite data sets. 2 hours
5. Landuse and landcover Analysis. 2 hours
6. Importing scanned and image file to GIS platform. 2 hours
7. Digitization, attribute assigning, Raster to Vector formats. 3 hours
8. Creating Thematic Layers/ Maps. 3 hours
9. Spatial Analysis (Overlay, Buffering etc.). 3 hours
10. DEM / DTM generation. 3 hours
11. Extraction of Topographic parameters (slope, aspects, drainage etc.,)
3 hours
includes map creation.
12. Open Source data access 3 hours
Total 30 hours
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 190

 L T P J C
CLE3004 ADVANCED STRUCTURAL ANALYSIS
2 2 2 0 4

Syllabus version
Pre-requisite CLE2003 – Structural Analysis
1.2
Course Objectives:
1. To study the multi storey frames subjected to gravity loads and lateral loads
2. To study the behavior of plastic analysis
3. To know the concepts of flexibility and stiffness methods for structural analysis
4. To obtain the knowledge of thermal and initial strain
5. To know the basics of finite element modeling of structures
Expected Course Outcome:

Upon completion of this course, the student will be able to

1. Analyze multistory frames subjected to gravity loads and lateral loads
2. Know the importance of the shape factor
3. Analyse beams and frames using flexibility and stiffness methods.
4. Evaluate thermal strain for various boundary conditions.
5. Understand the concept of finite element method.
Module: 1 Approximate methods for gravity loads 3 hours
Substitute frame method for dead load and live loads
Module: 2 Approximate methods for lateral loads 3 hours
Calculation of wind load, portal method - cantilever method - Factor method.
Module: 3 Plastic Analysis 4 hours
Shape factor - simple sections - rectangular - triangle - circular - flanged sections - Load factor.
Plastic moment of resistance - collapse load - analysis of continuous beams and portals - limiting
conditions for applications.
Module: 4 Flexibility Method 5 hours
Flexibility - compatibility equation - flexibility influence coefficients - force transformation matrix -
flexibility matrix-analysis of beams & frames (rigid and pin-jointed).
Module: 5 Stiffness Method 5 hours
Direct stiffness method - equivalent joint load - transformation matrix - development of structure
stiffness matrix for axial element - assembly of structure stiffness matrix from element stiffness
matrix - incorporation of boundary conditions.
Module: 6 Special Issues in Analysis of Structures 4 hours
Thermal and initial strain (temperature change and misfit) - Displacement boundary conditions.
Module: 7 Introduction to Finite Element Method 4 hours
Introduction to basics of Finite Element modelling.

B.TECH. (BCL) Page 191

Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.

Tutorial Class for Module 1 30 hours

Tutorial Class for Module 2
Tutorial Class for Module 3
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)
1. Aslam Kassimali, Matrix Analysis of Structures, 2nd Edition, CENGAGE Learning Custom
Publishing, 2011.
2. C. S. Reddy, Basic Structural Analysis,3rd Edition, Tata Mcgraw Hill Education, 2014
Reference Books
1. Igor A. Karnovsky and Olga Lebed, Advanced methods of Structural Analysis, Springer
New York. 2010.
2. C. Natarajan and P. Revathi, Matrix methods of Structural Analysis: Theory and Problems,
PHI Pvt Ltd, India, 2014.
3. Pandit, G.S, & Gupta S.P, Structural Analysis (A matrix approach), Tata McGraw Hill
Publishing Ltd., 2008.
Laboratory Exercises hours
1. Analyse a pin jointed static determinate truss 3 hours
2. Analyse a pin jointed static indeterminate truss 3 hours
3. Analyse a continuous beam with different types of loading 3 hours
4. Analyse a portal frame with different type of loading 3 hours
5. Verification of portal method assumption and analysis for different bays 3 hours
6. Verification of cantilever method assumption and analysis for different
3 hours
bays
7. Analysis of a 3 D truss 4 hours
8. Analysis of a 3D frame 4 hours
9. Modeling of a simple plan of a structure 4 hours
Total 30 hours
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 27.09.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 192

 L T P J C
CLE3005 GROUND WATER ENGINEERING
3 0 0 0 3
Syllabus version
Pre-requisite CLE2004 – Water Resources Engineering
1.0
Course Objectives:
1. To learn about the importance of groundwater occurrence, movement and its importance in
hydrologic cycle
2. To become familiar with aquifer types and aquifer parameters
3. To derive groundwater flow equations for confined and unconfined aquifers under steady
and unsteady flow conditions
4. To understand well hydraulics, and in-situ tests for determining drawdown and flow through
wells
5. To be able to comprehend groundwater pollution, its causes and methods for controlling
groundwater pollution
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the occurrence, movement, types, and various parameters of groundwater system
2. Solve the equations for steady and unsteady flow through confined and unconfined aquifers
3. Understand about the types of wells and their functioning
4. Identify the process and methods for analyzing results from a pumping test
5. Understand the causes and sources of groundwater pollution and the remedial measures to be
adopted to control groundwater pollution
6. Solve groundwater flow equations through numerical methods
Module: 1 Occurrence and Movement of Groundwater 6 hours
Introduction to Hydrologic cycle – Origin and Age of groundwater- Vertical distribution of
groundwater.
Module: 2 Types of Aquifer and groundwater movement 5 hours
Aquifer - water table - Darcy’s Law, Coefficient of Transmissibility and storage – Determination of
hydraulic conductivity-groundwater flow rates.
Module: 3 Well Hydraulics 6 hours
Steady Unidirectional flow -Study of steady radial flow – Unsteady radial flow in a confined and
Unconfined aquifer –Multiple well system.
Module: 4 Water Well 4 hours
Characteristic well losses, open well, tube well, well depth, well screen – Slug tests
Module: 5 Analysis and Evaluation of Pumping Test 7 hours
Definition of terms - static water level, pumping level, drawdown – residual, drawdown pumping
rate - automatic water level recorder - time drawdown analysis - distance drawdown analysis,
Jacob’s methods, pumping test methods.

B.TECH. (BCL) Page 193

Module: 6 Pollution of Groundwater 7 hours
Measures of water quality- chemical analysis - graphical representation-physical analysis- biological
analysis - Pollution in relation to water use - sources, municipal, industrial, agricultural, evaluation
of pollution potential. Remedial measures for ground water contamination.
Management of Groundwater and Groundwater Flow Modelling
Module: 7 8 hours
Techniques
Concepts of Basin Management-Groundwater basin Investigations and data collection-Yield-
Conjunctive use and Watershed management - Water laws and policies Types of groundwater
models - simulation of two and three dimensional groundwater system-MODFLOW 2000
Module: 8 Contemporary issues 2 hours
Total Lecture hours 45 hours
Text Book (s)
1. David K Todd and Larry W. Mays (2013), Groundwater Hydrology, Third Edition, John
Wiley & Sons Singapore.
Reference Books
1. Rastogi R K, Applied groundwater hydrology, (2011).
2. Raghunath H. M., Groundwater, Second Edition, Wiley Eastern Limited, New Delhi, (2012).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 194

 L T P J C
CLE3007 TRAFFIC ENGINEERING
2 0 0 4 3
Syllabus version
Pre-requisite CLE2005 – Transportation Engineering
1.0
Course Objectives:
1. To provide understanding on basic traffic characteristics and various models describing the
relationship among traffic stream parameters
2. To train students to collect and analyze traffic data
3. To prepare students to perform capacity and level of service analysis of a highway
4. To teach students to perform traffic signal design using IRC guidelines
5. To make students aware of traffic regulations and measures to manage traffic
6. To enable students to understand the importance of roadway safety and accident analysis
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Describe traffic stream parameters and their relationship
2. Identify various traffic stream models and their application
3. Collect the traffic data and analyse it using statistical tools.
4. Evaluate capacity and level of service for a given highway
5. Design traffic signal using IRC guidelines
6. Describe various measures of traffic regulations and management
7. Collect the data related to accidents and identify accident hot spots
Module: 1 Basic Concept of Traffic Characteristics 4 hours
Parameters used to describe a traffic stream – Macroscopic and microscopic level - Flow, Speed,
Density – Time headway, Time mean speed, Space headway - Their basic relationship –
Fundamental traffic flow equation
Module: 2 Traffic Stream Models 4 hours
Introduction to traffic stream models – Greenshield’s, Greenberg, Underwood, Northwestern models
– Application of traffic stream models – Shock waves
Module: 3 Traffic Studies 5 hours
Traffic studies – Volume, speed, density, time headway, space headway, travel time and parking –
Methods of data collection – Statistical analysis – Application of Poisson model – Gap acceptance
studies – Queueing models
Module: 4 Highway capacity and Level of service 4 hours
Basic definitions related to capacity – Level of service (LOS) concept – Factors affecting capacity
and LOS – Computation of capacity and LOS for 2-lane highways – Multilane highways –
Freeways – IRC guidelines
Module: 5 Traffic Signals 4 hours
Traffic signals – Warrants for signalization – Design of traffic signal by Webster method – Signal
coordination and area traffic control – IRC guidelines
B.TECH. (BCL) Page 195
Module: 6 Traffic Regulations and Management 4 hours
Introduction to Transportation System Management (TSM) - Measures for improving vehicular
flow – one way streets, transit stop relocation, parking management, reversible lanes -
Reducing Peak Period Traffic - Strategies for working hours - Congestion Pricing - Traffic signs
and roadway markings - Types, specification
Module: 7 Roadway Safety 3 hours
Purpose of accident studies - Accident data collection – Identification of accident hot spots - Use of
Global Positioning Systems (GPS) and Geographic Information Systems (GIS) – Causative factors
of road accidents - Predictive models - Road Safety Auditing - Measures to increase Road safety.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Fred L. Mannering, Scott S. Washburn, Walter P. Kilareski (2012) “Principles of Highway
Engineering and Traffic Analysis”, John Wiley & Sons.
Reference Books
1. Nicholas Garber, Lester A. Hoel, “Traffic and Highway Engineering”, 5th Edition, Cengage
Learning, USA, (2015).
2. L. R. Kadiyali, N. B. Lal, “Traffic Engineering and Transport Planning”, Khanna Publishers,
New Delhi, India, (2011).
Project Titles (J component) Hrs.
Challenging projects for Individual or a group will be given based on the basic and
60 hrs
advancements in the course content
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 196

 L T P J C
CLE3008 TRANSPORT PLANNING AND MANAGEMENT
2 0 0 4 3
Syllabus version
Pre-requisite CLE2005 – Transportation Engineering
1.0
Course Objectives:
1. To familiarize students with the transportation planning process and four step travel demand
forecasting process.
2. To enable students to plan and organize a data collection program for travel demand
modelling.
3. To teach students how to analyse travel data and prepare inputs for travel demand model
development.
4. To assist students to prepare and apply a basic trip generation model.
5. To train students to select suitable basic trip distribution models and apply it for given data.
6. To prepare students to describe and apply basic mode choice models.
7. To facilitate the students to perform a basic traffic assignment procedure on a given network.
8. To demonstrate how to perform a basic economic evaluation of a given set of transportation
projects.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Describe the transportation planning process and four step travel demand forecasting
process.
2. Plan and organize a data collection program for travel demand modelling.
3. Analyse travel data and prepare inputs for travel demand model development.
4. Prepare and apply a basic trip generation model
5. Describe and apply basic trip distribution models for given data.
6. Apply basic mode choice models.
7. Perform a basic traffic assignment procedure on a given network.
8. Perform a basic economic evaluation of a given set of transportation projects.
Module: 1 Transport Planning Process 6 hours
Scope – Urban transportation systems - Systems approach to transportation planning – Long term vs
Short term – Simultaneous vs sequential approaches – Aggregate vs disaggregate approaches.
Module: 2 Transportation Planning Surveys 3 hours
Transport survey – definition of study area and traffic zones – External cordon line – Sample size –
Home interview survey and cordon line surveys - inventory of existing transport facilities, land use
and economic activities.
Module: 3 Trip Generation 4 hours
Factors governing trip generation: physical, social and economic – multiple regression analysis –
category analysis
Module: 4 Trip Distribution 4 hours
Presentation of Trip distribution data – PA matrix to OD matrix - Growth factor methods - Gravity
model and its calibration – opportunities model.

B.TECH. (BCL) Page 197

Module: 5 Modal Split Analysis 4 hours
Factors influencing mode choice – Modal split models – Trip end and trip interchange –
Disaggregate mode choice models - Discrete choice models
Module: 6 Traffic Assignment 4 hours
Traffic assignment – general principles – description of highway network – Moore’s shortest path
algorithm - assignment techniques – all nothing assignment – capacity restrained assignment –
diversion curves
Module: 7 Transport Economics 3 hours
Economic evaluation techniques – Benefit cost ratio, NPV method, IRR method – Comparison –
Examples
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. L. R. Kadiyali, Traffic Engineering and Transport planning, Khanna Publishers, New Delhi,
(2011).
Reference Books
1. Fred L. Mannering, Scott S. Washburn, Walter P. Kilareski, Principles of Highway
Engineering and Traffic Analysis, John Wiley & Sons, (2012).
2. Papacostas and Prevedouros, Transportation Engineering and Planning, Pearson, India,
(2015).
Project Titles (J component) Hrs.
Challenging projects for Individual or a group will be given based on the basic and
60 hrs
advancements in the course content
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 198

 L T P J C
CLE3010 ARCHITECTURE AND TOWN PLANNING
2 0 0 4 3
Syllabus version
Pre-requisite CLE2001 – Building Drawing
1.1
Course Objectives:
1. To learn the Architectural aspects and to understand the history of Romans, Greek, and
South Indian Architecture.
2. To know the different type of architectures and its importance
3. To understand the basic principles of town planning
4. To Understand interior planning and design
5. To Know the challenges of SMART cities
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the creative process to improve the user-friendly experience in space
2. Improve communicative skills and emotional strength in presenting ideas through 2D and 3D
form
3. Comprehend the past, follows present, ascendance the future
4. Interpretation of idea through study and planning of workable efficiency of town and city
5. Understand the long term development path without compromising the present for future

Module: 1 Basics of Architecture 6 hours

Principles of architectural composition – unity, balance, proportion, scale, contrast, harmony,
accentuation, restraint, definition, repose, vitality, strength - with the help of illustrations of
buildings,
Organizing principles of architectural composition – symmetry, hierarchy, datum, axis, rhythm –
different types of spatial organizations of masses – linear, centralized, radial, clustered, grid
organization – illustrations of buildings.
Use of different materials - Styles in architecture - Anthropometrics , furniture layout - circulation -
lighting and ventilation for spaces
Module: 2 Skills for an Architectural Understanding 3 hours
Various Drawing Skills - Visualization Skills - Model Making skills - Thinking & Analytical Skills
- Empathy - Philosophical Understanding from Idea to Form - Psychological and Social
Understanding
Module: 3 Architecture in Timeline 5 hours
Understanding the construction methods and materials through study of Egyptian, Greek, Roman,
European, Indian Architectural History - Modern Architecture - Contemporary Architectural
Practice
Module: 4 Interior Design 3 hours
Interior Planning and treatment – Use of natural and synthetic building materials – Thermal and
Accoustical materials – Furniture and Fittings.

B.TECH. (BCL) Page 199

Module: 5 Human Settlements 4 hours
Planned and organic - typologies of cities like Capital, Port, Rural etc- Elements of human
settlements
Module: 6 Town Planning Principles 4 hours
Planning ideologies – Importance of Climate topography, drainage and water supply in the selection
of site for the development – Residential – Commercial – Industrial – Public – Transportation,
Utility and services – Agriculture.
Module: 7 Smart Cities - Opportunities and Challenges 3 hours
Indian scenario - need for smart cities - Issues and Opportunities. Green Building.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. De Charia & Callender, Architecture, Mc. Graw Hill, (2012).
Reference Books
1. Gallion, Urban pattern City planning and design, Charotar Publishing House, (2010).
2. Modak & Ambedkar, Town and Country Planning and Housing, (2001).
Sl. No. Sample projects - J component Hrs.
Design of a Restaurant / any other medium sized project that calls for both
1.
interior and exterior design.
Intervene with Architecture / Townplanning solution to a localized social or
2.
urban Issue.
60 hours
3. Green Ideation projects
4. Architectural projects that carry more structural design emphasis.
5. Smart City (intervention) solutions Projects
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 200

 L T P J C
CLE3011 FINITE ELEMENT METHODS
2 2 0 0 3
Syllabus version
Pre-requisite CLE2003 – Structural Analysis
1.1
Course Objectives:
1. To provide fundamental concepts of finite element method.
2. To introduce procedures and principles to carry out finite element analysis.
3. To provide understanding of numerical techniques and its application to structures.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the concept of finite element methods
2. Identify finite elements in a given application and generate governing equations.
3. Apply finite element principles to one-dimensional elements.
4. Apply finite element principles to two-dimensional elements.
5. Identify and solve problems using numerical techniques.
6. Identify and relate coordinate systems of structures.
Module: 1 Introduction 4 hours
Concepts of finite element methods - Steps involved - merits and demerits - Energy principles -
Discretization.
Module: 2 Principles of Elasticity 4 hours
Equations of equilibrium - Stress equations - Stress - strain relationship - Strain - displacement
matrix - Plane stress and plane strain conditions.
Module: 3 Theory of Finite Element methods 4 hours
Concept of an element - Various element shapes - Displacement models - Approximation
displacements by polynomials - Convergence requirements - Shape functions.
Module: 4 One dimensional FEM 4 hours
Stiffness matrix for bar and beam element - one dimensional problems.
Module: 5 Two dimensional FEM 4 hours
Minimization of band width - Analysis of two dimensional framed structures (trusses, frames) for
loads and displacements.
Module: 6 Natural coordinate system 4 hours
Area and volume coordinates - Lagranges’s and serendipity elements - Numerical integration
techniques.
Module: 7 Isoparametric formulation 4 hours
Concepts of isoparametric formulation - Iso parametric Bar element - Plane bilinear isoparametric
element.

B.TECH. (BCL) Page 201

Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.

Tutorial Class for Module 1

Tutorial Class for Module 2
Tutorial Class for Module 3
30 hours
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
Text Book (s)
1. Krishnamoorthy, C.S, "Finite Element Analysis", Tata McGraw Hill Publishing Co. Ltd.,
2015
Reference Books
1. Tirupathi R. Chandrupatla and Ashok D. Belugundu, Introduction to Finite Elements in
Engineering, Prentice Hall, (2011).
2. Mukhopadhyay, M., & Sheikh, A. H., Matrix and finite element analyses of structures, Ane
Books, (2011).
3. Larson, M. G., Finite element method: theory, implementation, and applications, Springer,
(2013).

Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test

Recommended by Board of Studies 27.09.2017

Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 202

 L T P J C
CLE4001 DESIGN OF STEEL STRUCTURES
3 0 2 0 4
Syllabus version
Pre-requisite CLE3002 – Basics of Structural Design
1.0
Course Objectives:
1. To learn the behavior and design of structural steel.
2. To gain an educational and comprehensive experience in the design of steel structures.
3. To apply the principles, procedures and current code requirements to the design of steel
structural members
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the behavior and design the framed steel structures
2. Identify and compute the design loads for industrial structures
3. Apply the concepts and design steel water tanks
4. Design the light gauge steel structures
5. Design the Steel Gable Frames
6. Understand the design of steel-concrete composite structures
7. Develop complete drawings of steel structures including all details of sections and
connections.
Module: 1 Braced and Moment Frames 6 hours
Design of braced frames – moment frames.
Module: 2 Design of industrial structures 7 hours
Roof Trusses - calculation of dead load- live load & wind load - Design of joints - supports -
members for pitched roof truss - purlins.
Module: 3 Water Tanks 7 hours
Overhead water tanks - pressed steel tanks - design of staging and foundation.
Module: 4 Light Gauge Sections 7 hours
Design of light gauge steel members - local and post buckling of thin element - light gauge steel
compression members - tension members - beams and connections.
Module: 5 Design of Steel Gable Frame and Beam Columns 6 hours
Design of steel gable frame - beam column - base plate and anchor bolt.
Module: 6 Design of Steel, concrete composite structures 6 hours
Dimensions of steel stacks - loading and load combinations. Slabs, Beams, Columns
Module: 7 Detailing of Steel Structures 4 hours
Detailing and drawing of frames - water tanks - gable frames
Module: 8 Contemporary issues 2 hours

B.TECH. (BCL) Page 203

 Total Lecture hours 45 hours
Text Book (s)
1. Subramanian, N," Design of Steel structures", Oxford University press, New Delhi, 2011.
Reference Books
1. Ramchandra. S., Virendra Ghelot, “Design of Steel of Structures”, Volume 1, Scientific
Publishers, New Delhi, 2011.
2. Duggal .S.K. “Limit State Design of Steel Structures”, Tata McGraw Hill Publishing
Company, New Delhi, 1st Edition, 2010.
3. Bhavikatti S. S. "Design of Steel Structures by Limit State Method as Per IS: 800 - 2007", I.
K. International Pvt. Ltd., 2009.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Laboratory Exercises hours
Design and drawing of
10 hours
• Water tanks
• Steel roof trusses 10 hours
• Gable frames 10 hours
Total 30 hours
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 204

 L T P J C
CLE4002 DESIGN OF ADVANCED CONCRETE STRUCTURES
2 0 0 4 3

Syllabus version
Pre-requisite CLE3002 – Basics of Structural Design
1.0
Course Objectives:
1. To understand the design of columns
2. To understand the design of bridges
3. To know the importance of the retaining wall and its applications
4. To apply the numerical techniques for different structural elements
5. To study the different numerical procedures for calculating the response of structures
6. To learn the design of frames, slabs.
7. To learn the design of retaining wall, tank and deck slab for bridge.
8. To learn the application of numerical method in shear force - Bending moment.
9. To evaluate stability and analyze plate.
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the theories of slabs.
2. Design the structural frame members.
3. Understand the concepts of frame analysis.
4. Design the retaining walls.
5. Design the water tanks.
6. Design the bridges and deep beams.
Module: 1 Yield line theory of slab design 3 hours
Yield line theory - Assumptions made in analysis - Hillerborg’s Theory - Analysis of isotrophic
conditions - virtual work method and equilibrium method.
Module: 2 Design of Structural frames 3 hours
Design of Stair Case - Design of slender columns - uni-axial and biaxial bending
Module: 3 Introduction to frame analysis 4 hours
Substitute frame method - cantilever method and portal frame method.
Module: 4 Retaining Walls 5 hours
Design of walls - cantilever and counter fort retaining walls.
Module: 5 Water Tanks 5 hours
Design of under - ground rectangular tanks - circular tank -Design of over-head rectangular tanks -
circular tank – domes.
Module: 6 Design of Bridges 5 hours
Classification of bridges - IRC code - Pigeaud’s method - Coulomb’s method - design of slab bridge

B.TECH. (BCL) Page 205

Module: 7 Design of Deep beams 3 hours
Design of simply supported and continuous deep beams.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Bhavikatti S, (2016), Advanced RCC Design (Volume 1 and Volume 2), New Age
International.
Reference Books
1. Varghese, P.C, "Advanced Reinforced Concrete Design", Prentice-Hall of India, New Delhi,
2011.
2. Ramamrutham S, Design of Reinforced Concrete Structures, Dhanpat Rai Publishers, 2016.
3. Gambhir. M. L. “Design of Reinforced Concrete Structures”, Prentice Hall of India, 2012.
4. Unnikrishna Pillai and Devdas Menon “Reinforced Concrete Design’, Third Edition, Tata
McGraw Hill Publishers Company Ltd., New Delhi, 2017.
5. IS 456 : 2000 Plain and Reinforced Concrete - Code of Practice.
6. IS 13920 Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forces -
Code of Practice.
7. IS 3370 Water Retaining Structures.
8. IRC Specifications
Samples projects for J component hours
1. Study influences of the yield line theory and practicality study on the
slabs
2. Functional requirements of staircases and design of stair case
3. Identifying the parameters influencing and design limitations in the long
columns
4. Flawless design and detailing of RCC structural components
5. Design of a retaining wall for a minor bridge
6. Design of a high-steep reinforced soil retaining wall
7. Design and analysis of rectangular water tank resting on ground
60 hours
8. Seismic Behavior & Design of RC Shear Walls
9. Influence of orientation of shear walls on structural behavior of RC
buildings
10. Design of flat slab for a commercial building
11. Comparison of structural behavior of conventional roof and flat slab
system
12. Design of a deep beam for an aesthetic building
13. Design of a arch bridge
14. Design of a railway bridge
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 206

 L T P J C
CLE4003 PRESTRESSED CONCRETE DESIGN
3 0 0 0 3

Syllabus version
Pre-requisite CLE3002 – Basics of Structural Design
1.0

Course Objectives:
1. To learn the principles, materials, methods and systems of prestressing
2. To know the different types of losses and deflection of prestressed members
3. To learn the design of prestressed concrete beams for flexural, shear and tension and to
calculate ultimate flexural strength of beam
4. To learn the design of anchorage zones, composite beams
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Understand the concepts of pre-tensioning and post-tensioning members
2. Analyse the flexural member.
3. Design a prestressed concrete beam accounting for losses
4. Calculate the deflection and crack width of prestressed members
5. Design the flexural member.
6. Design the member subjected to shear.
7. Design the composite members
Module: 1 Introduction 6 hours
Concept of Prestressing - Types of Prestressing - Advantages - Limitations -Prestressing systems -
Anchoring devices - Materials - Mechanical Properties of high strength concrete - high strength
steel - Stress-Strain curve for High strength concrete.
Module: 2 Analysis of members 6 hours
Analysis of members at transfer - Stress concept - Comparison of behavior of reinforced concrete -
prestressed concrete - Force concept - Load balancing concept - Kern point - Pressure line.
Module: 3 Losses in Prestress 6 hours
Loss of Prestress due to Elastic shortening, Friction, Anchorage slip, Creep of concrete, Shrinkage
of concrete and Relaxation of steel - Total Loss.
Module: 4 Deflection and Crack Width 6 hours
Calculations of Deflection due to gravity loads - Deflection due to prestressing force - Total
deflection - Limits of deflection - Limits of span-to-effective depth ratio - Calculation of Crack
Width - Limits of crack width.
Module: 5 Design of Sections for Flexure 6 hours
Analysis of members at ultimate strength - Preliminary Design - Final Design for Type 1 members -
Magnel’s graphical method

B.TECH. (BCL) Page 207

Module: 6 Design for Shear 6 hours
Analysis for shear - Components of shear resistance - Modes of Failure - Limit State of collapse for
shear - Design of transverse reinforcement.
Module: 7 Design of Deep beams 6 hours
Design of simply supported and continuous deep beams.
Module: 8 Contemporary issues 3 hours
Total Lecture hours 45 hours
Text Book (s)
1. Krishna Raju. N., Pre-stressed Concrete - Problems and Solutions, CBS Publishers and
Distributors, Pvt. Ltd., New Delhi, 2014.
Reference Books
1. Praveen Nagarajan, Advanced Concrete Design, Person, 2013.
2. P. Dayaratnam, Prestressed Concrete Structures, Oxford & IBH-Pubs Company, Delhi, 5th Edition,
2009.
3. IS: 1343: Indian Standard code of practice for Prestressed concrete, BIS, New Delhi.
4. IS: 3370-Indian Standard code of practice for concrete structures for storage of liquids, BIS,
New Delhi.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 208

 L T P J C
CLE4004 SEISMIC DESIGN OF STRUCTURES
2 2 0 0 3
Syllabus version
Pre-requisite CLE3002 – Basics of Structural Design
1.1
Course Objectives:
1. To introduce the basics of Earthquake Engineering
2. To introduce the engineering seismology, building geometrics & characteristics, structural
irregularities,
3. To develop guidelines for earthquake engineering
4. To discuss code provisions and their application on different types of structures
Expected Course Outcome:
Upon completion of this course, the student will be able to
1. Apply the basics of Earthquake Engineering
2. Demonstrate the dynamics of structural system under earthquake load
3. Understand the principles of earthquake resistant design
4. Analyze the influence of the structural / geometrical design in building characteristics
5. Design the beam column junctions in buildings subjected to earthquake loads.
6. Design a shear wall to resist the earthquake loads
7. Apply codal provisions on different types of structure
Module: 1 Seismology and earthquake 4 hours
Internal structure of the earth - discontinuity and nature of the material - continental drift and plate
tectonics - Faults - Elastic rebound theory - seismic waves and characteristics - earthquake size -
seismic zoning map of India.
Module: 2 Dynamics of structures 3 hours
Theory of vibrations - free and forced vibrations - single and multi-degree of freedom systems -
computations of dynamic response to time dependent forces.
Module: 3 Principles of earthquake resistant design 5 hours
Importance of Earthquake Resistant Design - Seismic Forces - modes of propagation - Factors
influencing seismic vulnerability - Characteristics of earthquake - Earthquake response of structures -
Application of response spectrum theory in seismic design - Concept of earthquake resistance design
- Codal provisions for seismic design of structures – IS 1893 and IS 4326.
Module: 4 Seismic analysis of moment resisting frames 4 hours
Seismic design philosophy, determination of design lateral forces as per IS: 1893 - equivalent static
force and dynamic analysis procedure - Effect of infill stiffness on analysis of frames - equivalent
diagonal strut.
Module: 5 Design of beam column junctions 3 hours
Elastic and Inelastic deformations of structures - ductility of the composite system - design of axial
and flexural members - beam column junction detailing - strong column weak beam effects as per IS:
13920.
B.TECH. (BCL) Page 209
Module: 6 Design of shear walls 4 hours
Unreinforced and reinforced masonry shear walls - analysis and design of reinforced concrete shear
walls - Bearings - Friction dampers - Tuned mass dampers.
Module: 7 Design of structures 5 hours
Seismic design of RC structures using - static and dynamic methods - equivalent static, response
spectrum and time history methods.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Text Book (s)
1. Pankaj Agarwal and Manish Shrikhande, Earthquake resistant design of structures, Prentice-
Hall India Pvt. Ltd., 2012.
2. Duggal, S. K, "Earthquake Resistant Design of Structures", Oxford university press, 2007.
Reference Books

1. Park, R & Paulay, "Design of Reinforced Concrete Structure Elements", John Wiley & sons,
2009.
2. Kramer. S. L, "Geotechnical Earthquake Engineering", Prentice-Hall India Pvt. Ltd., 2010.
3. IS: 1893 (Part 1) 2002, Criteria for earthquake resistant design of structures, BIS, New Delhi.
4. IS: 13920-1993, Ductile detailing of reinforced concrete structures subjected to seismic
forces, BIS, New Delhi.
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 04.03.2016
Approved by Academic Council 40th ACM Date 18.03.2016

B.TECH. (BCL) Page 210

 L T P J C
MEE1024 OPERATIONS RESEARCH
2 2 0 0 3
Pre-requisite MAT2001 – Statistics for Engineers Syllabus version
Anti-requisite Nil 1.1
Course Objectives:
1. To provide students the knowledge of optimization techniques and approaches.
2. To enable the students apply mathematical and computational needed for the practical utility
of Operations Research.
3. To teach students about networking, inventory, queuing, decision and replacement models.
Expected Course Outcome:
Student will be able to
1. Illustrate the use of OR models like LPP, Transportation etc., in a wide range of applications
in industries.
2. Analyze various OR models like inventory, queuing, simulation, and decision etc. and apply
them for optimization.
3. Gain knowledge on current topics and advanced techniques of Operations Research for
industrial solutions.
Module: 1 Linear Programming Problem 4 hours
Introduction to Operations Research – Linear Programming - Mathematical Formulation –
Graphical method – Simplex method – Penalty methods: M-method, Two Phase method- Duality.
Module: 2 Transportation Problem 4 hours
Introduction - Formulation - Solution of the transportation problem (Min and Max): Northwest
Corner rule, row minima method, column minima method, Least cost method, Vogel’s
approximation method – Optimality test: MODI method.
Module: 3 Assignment and Sequencing Models 3 hours
Assignment problems – Applications - Minimization and Maximization; Sequencing - Problem with
N jobs and 2 machines – n jobs and 3 machines problem - n jobs and m machines problem.
Module: 4 Project Management 4 hours
Introduction - Phases of project management-Construction of Network diagrams- Critical path
method (CPM) and Project evaluation and review technique (PERT) - Crashing of project network.
Module: 5 Inventory Control 4 hours
Necessity for maintaining inventory - Inventory costs -Inventory models with deterministic
demand - inventory models with probabilistic demand - Inventory models with price breaks -
Buffer stock.
Module: 6 Queuing Models 4 hours
Poisson arrivals and Exponential service times – Single channel models and Multi-channel
models - Simulation: Basic concepts, Advantages and disadvantages - Random number
generation - Monte Carlo Simulation applied to queuing problems.

B.TECH. (BCL) Page 211

Module: 7 Design of structures 5 hours
Game theory: Competitive games - Useful terminology - Rules for game theory - Two person zero
sum game – Property of dominance - Graphic solution – Algebraic method.
Replacement models: Replacement of items that deteriorate with time: No changes in the value of
money, changes in the value of money - Items that fail completely: Individual replacement and
group replacement policies.
Module: 8 Contemporary issues 2 hours
Total Lecture hours 30 hours
Tutorial
• A minimum of 3 problems to be worked out by students in every tutorial
class.
• 5 problems to be given as homework per tutorial class.
• At least one open ended design problem to be given.
Tutorial Class for Module 1
Tutorial Class for Module 2
Tutorial Class for Module 3 30 hours
Tutorial Class for Module 4
Tutorial Class for Module 5
Tutorial Class for Module 6
Tutorial Class for Module 7
# A minimum of 3 problems to be worked out by students in every tutorial class.
Another 5 problems per tutorial class to be given as home work.
# Mode: Individual exercises, Team exercises.
Text Book (s)
1. Hamdy A Taha, Operations Research: An Introduction, 9th edition, Pearson Education, Inc.,
(2014).
Reference Books
1. Hira D S and Gupta P K, Operations Research, Revised edition, S. Chand & Sons, (2014).
2. Kanti Swarup, Gupta P.K., and Man Mohan, Operations Research, 18th edition, S. Chand &
Sons, (2015).
3. Manohar Mahajan, Operations Research, Dhanpat Rai & Co., (2013).
Mode of Evaluation: Continuous Assessment Test, Quizzes, Assignments, Final Assessment Test
Recommended by Board of Studies 17.08.2017
Approved by Academic Council 47th ACM Date 05.10.2017

B.TECH. (BCL) Page 212