IT COOLING
CLOSE CONTROL AIR CONDITIONERS
i-MTR2-G02-M0
PRECISION AIR CONDITIONERS
FOR STABLE ROOM CONDITIONS
melcohit.com
IT COOLING
CLOSE CONTROL AIR CONDITIONERS
i-MTR2-G02-M0
Extreme precision in temperature and humidity control
The temperature and humidity parameters strongly affect the
measurements, tests and storing of sensitive goods.
i-MTR2-G02-M0 is the most dependable and efficient solution developed
for these kinds of applications even in low or no load conditions.
IDEAL APPLICATIONS
a Metrological environments
a Laboratories
a Technological sites
a Archives
a Textile industry
a Tobacco industry
a Paper industry
a Museums
2/3
2/3
PRECISION AIR CONDITIONERS WITH INVERTER TECHNOLOGY
FOR STABLE ROOM CONDITIONS
TEMPERATURE AND HUMIDITY ± 0.3 °C
ALWAYS UNDER CONTROL
± 2 % RH
Minimal variations in the environmental conditions 25
can influence the final result of test activities 24
TEMPERATURE (°C)
23
or compromise the correct preservation of 22
perishable goods. 21
20
19
i-MTR2-G02-M0 ensures an accurate calibration 18
00:00 03:00 06:00 09:00 12:00 15:00 18:00 21:00 24:00
of temperature and humidity thanks to the ABSOLUTE TIME (h:m)
continuous modulation of: compressor, 24
hot gas reheating and steam production.
RELATIVE HUMIDITY (°C)
60
55
50
45
40
00:00 03:00 06:00 09:00 12:00 15:00 18:00 21:00 24:00
ABSOLUTE TIME (h:m)
PRECISION IN ALL LOAD CONDITIONS
The i-MTR2-G02-M0 unit was designed
as completely autonomous unit.
In fact, thanks to the EVOLUTION+
software, it allows for the reduction
of the refrigeration capacity from
100% to 0%.
The unit is able to maintain control of the
temperature and humidity with maximum
precision even on low heat load.
IT COOLING
CLOSE CONTROL AIR CONDITIONERS
AVANT-GARDE TECHNOLOGICAL CHOICES,
FOR THE MOST CRITICAL APPLICATIONS
NEW GENERATION ADVANCED EVOLUTION+
EC FANS CONTROL
The high performing EC fans ensure:
a A perfect airflow modulation at partial loads
a Reduction of the noise levels by 4-5 dB(A)
a Reduction of the absorbed power by 25%
compared to traditional solutions
The electronic heart of the unit has been
designed internally to guarantee maximum
reliability, efficiency and perfect control
of all the parameters:
a Automatic reactivation after black out
VARIABLE AIR FLOW a Management of additional T/H remote probes
a Management LAN network (up to 15 units)
a Up to 200 events recorded
MAXIMUM ENERGY EER ON/OFF unit
EER FULL INVERTER unit
EFFICIENCY 6,00
i-MTR2-G02-M0 thanks to the inverter 5,00
compressor technology combines the
increase of efficiency at partial load and the 4,00
reliability of the continuous operation.
3,00
EER
2,00
1,00
0,00
30% 40% 50% 60% 70% 80% 90% 100%
LOAD DRIVEN COMPRESSOR
4/5
4/5
NEW TOUCH KEYBOARD
A completely redesigned interface improves the user experience.
The 7” touch screen display (opt.) with easy-to-read color graphics ensures the immediate
visualization of the units’ status and provide simple alarms and event management.
Dedicated menus show the main operating parameters like temperature, humidity, and ventilation.
7” TOUCH DISPLAY
MULTILANGUAGE
INTUITIVE ICONS
for a better user experience
MULTILANGUAGE
13 available languages
QUICK MENU ACCESS
REAL-TIME DISPLAY
of main operating variables
IT COOLING
CLOSE CONTROL AIR CONDITIONERS
INNOVATIVE KIPLINK
INTERFACE
Based on proprietary technology, KIPlink is an option that allows
one to operate the unit directly from a mobile device smartphone,
tablet, or notebook.
EASIER ON-SITE OPERATION
View and change all parameters thanks to an
easy-to-understand interface and dedicated tooltips.
Get devoted “help” messages for alarm reset and
troubleshooting.
REAL-TIME GRAPHS AND TRENDS
Monitor the immediate labour status of main
components.
View the real-time graphs of the key operating
variable trends.
DATA LOGGER FUNCTION
View history of events and use the filter for a simple
search.
Enhance diagnostics with data and graphs
of 10 minutes before and after each alarm.
Download all the data for detailed analysis.
6/7
6/7
WI-FI KEYBOARD
Close to the unit with MEHITS APP access
MOBILE DEVICE
012345678910 iFXQ2
Master Unit
LOCAL WI-FI
Direct access to the control is achieved by scanning
012345678910
the QR-code positioned on the front side of the unit.
iFXQ2
Master Unit
REMOTE CONTROL
In local network (LAN) of building with internet browser
BROWSER
LAN PORT
With a simple Ethernet connection, it is possible to connect KIPlink
to the facility LAN and get full access to the unit’s control with a browser.
All the menus and functions are available with total security.
IT COOLING
CLOSE CONTROL AIR CONDITIONERS
i-MTR2-G02-M0
INV. COMP. VAIR EEV
R HFC R410A HUMIDIF. DEHUMID. RE-HEAT
Unit fitted with modulating hot gas re-heating coil
that combines the use of the INVERTER
compressor with the possibility to humidify or
dehumidify the environment. It allows for extremely
precise and stable control of the temperature and
humidity conditions, resulting in particular efficiency
especially at low heat loads.
i-MTR2-G02-M0 DX
Model 012 018
Size E2 E2
COOLING CAPACITY (1)
Total kW 11.1 15.8
Sensible kW 11.1 14.55
Total Power Input kW 2.94 4.84
Cooling Capacity Control 0 - 100 % 0 - 100 %
Thermal Capacity In Heating (2) kW 6.41 6.65
Refrigerant R410A R410A
Power Supply V/Ph/Hz 400/3+N/50 400/3+N/50
VAPOUR PRODUCTION kg/h 5 5
ELECTRIC HEATERS
Steps 2 2
Power kW 6 6
EER (1) 3.78 3.26
FAN SECTION
Air flow mc/h 3500 4100
Number 1 1
Type EC EC
Power input (3) kW 0.41 0.65
DIMENSIONS
Lenght mm 785 785
Width mm 675 675
Height mm 1925 1925
Net weight kg 278 280
NOTES
1) Incoming air 24°C/50%, condensing temperature 45°C-ESP 20 Pa
2) Heating capacity resulting from operation of electric heaters with the compressors off and the ventilation running
3) Corresponding to the nominal external static pressure
8/9
8/9
GR-Z
R HFC R410A AXIAL-AC AXIAL-EC
Remote air cooled condenser for optimal matching with
i-MTR2-G02-M0. Equipped with variable speed fans and
micro-channel condensing coil to achieve a high level of
efficiency.
GR-Z
Model 015 024
REFRIGERANT R410A R410A
POWER SUPPLY V/ph/Hz 230/1/50 230/1/50
CAPACITY (1) kW 14.4 23
FANS n. 1 1
Total air flow m³/h 4600 7098
External static pressure Pa 0 0
Total engaged power kW 0,31 0,51
Total absorbed current (SA) A 1,7 2,5
Maximum total engaged power (FLI) kW 0,38 0,54
Maximum total absorbed current (FLA) A 1,7 2,5
NET WEIGHT kg 30 45
NOTES
1) Referred to condensing temperature at 50°C and ambient air temperature at 35°C.
IT COOLING
CLOSE CONTROL AIR CONDITIONERS
“ BY FAR THE BEST PROOF
IS EXPERIENCE” Sir Francis Bacon
British philosopher (1561-1626)
All over the world, in most data centers and in all projects where efficiency, quality, and
reliability are priorities, the precision RC IT Cooling air conditioners are the best guarantee.
TRUE MTG DATA CENTER
BANGKOK - THAILAND
Data center
Total cooling capacity: 3103 kW
Installed units:
50 x close control units
BRUNEI SHELL PETROLEUM
DATA CENTER
PANAGA-BRUNEI
Data center
Total cooling capacity: 1137 kW
Installed units:
4x Chilled water close control
air conditioners, downflow version
NATIONAL ARCHIVE (CIAM)
ORAN-ALGERIA
Institutions
Total cooling capacity: 495 kW
Total heating capacity: 240 kW
Installed units:
2x Scroll compressor heat pump,
15x Direct expansion close control
air conditioners, upflow version
10 / 11
10 / 11
CONSUM - LOGISTICAL PLATFORM
TORRES DE COTILLAS - MURCIA - SPAIN
Industrial technology, Supermarket
Total cooling capacity: 536 kW
Total heating capacity: 400 kW
Installed units:
2x chiller, 1x Rooftop Unit,
4x precision close control units, Fancoils
VOLKSWAGEN PLANT
BRATISLAVA - SLOVAKIA
Automotive
Total cooling capacity: 10.848 kW
Installed units:
32 Units: Chiller and HPAC units
LEONARDO DA VINCI
INTERNATIONAL AIRPORT
ROME, FIUMICINO-ITALY
Airports
Total cooling capacity: 266 kW
Installed units:
9x Air handling units,
2x screw compressor chillers,
9x Chilled water close control
air conditioners
SIAM PHARMACEUTICAL
BANGKOK-THAILANDIA
Process cooling
Total cooling capacity: 56 kW
Installed units:
2x Direct expansion air conditioners
with inverter technology
RC_i-MTR2-G02-M0_06/21_ENG
