=a@ZEBRONICS CQ) Juke Bar 19200 IN pws Pro Dolby User Manual www.zebronics.comImportant Safety Instruction Thank you for purchasing the ZEB-JUKE BAR 9200 DWS PRO DOLBY Soundbar. Please read this user manual carefully and keep for future reference. Warning CAUTION! RISK OF ELECTRIC SHOCK| DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) Caution: * To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user- serviceable parts inside. * Refer servicing to qualified personnel only.The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons. Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual. Notice: This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 1.To prevent possible hearing damage, do notlisten at high volume levels for long time periods or a sudden high volume level.2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while. 3. The appliance is not intended to be operated by means of an external timer or separate remote control system. 4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid ahazard. 5. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply. 6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit. 7. The apparatus must not be exposed to dripping or splashing liquid, no objects filled with liquids such as vases, should be placed on the apparatus. 8. To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust. 9. Do not position this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit ona dry, stable surface.10. Do not place this unit close to a strong magnetic field. 11. Do not place the unit on a amplifier or receiver. 12. Do not place this unit in a damp area as the moisture will affect the life of electric components. 13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth. 14. When removing the power plug from the wall outlet, always pull directly on the plug, never pullon the cord. 15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the LED TV. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set. 16. The mains plug is used to disconnect the device, the disconnected device should remain readily operable. Important Safety Instructions 1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. 2. Do not use this apparatus near water. 3. Clean only with dry cloth.4. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat. 6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus. 7. Only use attachments/accessories specified by the manufacturer. 8. Unplug this apparatus during lightning storms or when unused for long periods of time. 9. Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 10. The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.Preparation for Use Unpacking and Set Up * Remove the Sound bar from the carton and remove all packing material from the Sound bar. Save the packing material, if possible, in case the Sound bar ever needs to be serviced or transported. « — The original carton and packing material is the only safe way to pack your Sound bar to protect it from damage in transit. *« Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet. * Place your Sound bar on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration. *« — Unwind the Line cord connecting the AC adapter and extend it to its full length. Protect Your Furniture This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniturepolishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement center everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the unit. Important Notes * This soundbar was especially developed for LED/LCD/Plasma TVs: It should not be used in combination with CRT TV's (Cathode Ray Tube TV's) in order to avoid image interference. * Safety and operating instruction manual should be retained for future reference. * The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom. * Do not install the product in the following areas: * Places exposed to direct sunlight or close to radiators. * Ontop of other stereo equipment that radiate too much heat -Blocking ventilation or ina dusty area. * Areas where there is constant vibration.« Humid or moist places. * Donotplace near candles or other flames. * Operate the product only as instructed in this manual. * Before turning on the power for the first time, make sure the sound bar is plugged to power outlet. * For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. * Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel. Power Source: This soundbar is designed to operate on standard AC power 220-240V 50/60Hz. Do not attempt to operate the Soundbar on any other power source. You could cause damage to the Soundbar that is not covered by your warranty.Product Representation Sound Bar .BBEE a i) | | 1. DISPLAY 2. POWER 3. VOL+/- 4. INPUT 5. USB 6. AUX 7. OPTICAL 8. HDMI(ARC) 9. ACIN Gl : 1. LED indicator: It indicates pairing between the soundbar and the subwoofer. 2. WPS Button: It automatically pairs the soundbar with subwoofer. 3. USB Port (can't play mp3 music, for software upgrade only) 4. ACINPairing with Sub-Woofer Plug the soundbar and the subwoofer into the mains sockets at the same time 1. Press "STANDBY" to turn the soundbar on after it has been connected the the AC. Then press "INPUT" to select Bluetooth (BT) as the input mode. This will cause the soundbar to enter into pairing mode with the wireless subwoofer. 2. Switch the subwoofer on. The blue LED will blink slowly indicating the unit have power but need to be paired with the soundbar. Press and hold the WPS (AUTO PAIR BUTTON), the blue LED will flash quickly indicating they are nowin pairing mode. 3. After about 20-30 seconds, the blue LED of the subwoofer will stop flashing and remain blue to confirm a successful pairing with the soundbar. 4. The units will now be able to pair automatically after this initial successful pair, even if they are switched off and on. 5. If you want to pair your wireless subwoofer with another soundbar, please repeat step 1 to step 4 above. Ensure the soundbar you want to pair the subwoofer with is turned on and in range and any other pairing devices are switched off or on standby.Tips : The maximum Bluetooth connection distance in an open space between the soundbar and subwoofer should not exceed 10m. To avoid sound quality interference caused by wireless signal interference, when you are playing this soundbar, please ensure it is kept at an appropriate distance from other WIFI devices to avoid wireless signal interference. The flashing blue LED on the subwoofer will turn red if the paired soundbar is turned off, on STANDBY or not connected to the power. This means the subwoofer has also entered into STANDBY mode. If not, disconnect the subwoofer and soundbar from each other: 1. Turn off the soundbar and subwoofer by unplugging the AC plug from the socket. 2. Wait 3 minutes before replugging the AC plug into the power socket again. Ensure the soundbar and subwoofer are connected to the main power at the sametime. 3. Press and hold the subwoofer's rear panel WPS button to reset the connection, so that the soundbar and subwoofer can be reconnected again.8 ©C©HOO OO © Remote Control CFA eli (eny © © © © GO CO1. O : Standby mode for power on/off. 2. PAIR : Connect or disconnect to the pairing device. (Press the button more than 2 seconds). 3. Volume + : Master volume up 4. Ke : Pre button : Previous program (Only work under USB & BT mode) 5. Volume - : Master volume down 6. MUSIC _ : Select the Music EQ effect. 7.TR+ : Treble volume UP. 8. TR- : Treble volume down. 9. MUTE : Mute mode. 10. INPUT : Input mode (AUX/USB/HDMITV(ARC)/OPT/BT). 11. D>l : Next button : Next program. (Only work under USB & BT mode) 12. Pll : Play/Pause (Only work under USB & BT mode). Reset : Press and hold the button more than 2 sec. to Set all functions to manufacturer defaults. 13. MOVIE: Select the Movie EQ effect. 14. NEWS _ : Select the News EQ effect. 15.Bass+ :To increase the bass. 16.Bass- :To decrease the bass. 17.3D : Select the 3D EQ effect.Positioning the Sound Bar Table Placement + Place the soundbar horizontally on a solid surface such as a TV unit or shelves and align it centrally with the TV screen. + For best sound output and good airflow around the soundbar, place your soundbar and subwoofer as shown on the right. LJ it Mount on the wall WARNING : If you don't feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person of professional. Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least 25mm/1"distance between the sound bar andthe TV.Too 25mm /1" 25mm / 1" UNUSUAL Follow below steps to mount the sound bar on the wall 1. Open 4 holes in the wall referring to iron bracket for wall mounting, the spacing of the holes in the wall is corresponding to the distance between sound bar pads. 2. Fix the plastic anchor in the 4 holes of the wall mounting bracket. 3. Fix the screws on the plastic anchor and tighten the screws to ensure that the wall mounting bracket will not shake. 4. After fastening the screws, Put the sound bar pads into the extension of the wall mounting barcket.OPERATE INSTRUCTIONS Setting the Soundbar 1. Plug in the power cord and the display will light up (Standby mode) 2. Switch on the sound bar by pressing “STANDBY” button on sound bar or on remote controller. After switching on, the default input modewill appear on display. 3. Input modes can be changed by pressing the “INPUT” button on sound bar or on remote controller. 4. Below are input mode names appearing in the soundbar display: bt- Bluetooth mode AU -AUX mode OP - Optical mode Hd - HDMI (ARC) mode US-USB modeAuto Standby 1. The unit will automatically switch to standby mode when no audio input is received for 20 minutes. The soundbar will wake up from standby mode when any button is pressed or source inputis received. 2. If the TV or the external unit is disconnected, switch it off * To switch the unit off completely, remove the mains plug from the mains socket. + Please turn the unit off completely to save energy when notin use. Powering On/Off 1. Plug the power cord of the soundbar & subwoofer into a wall outlet, it will automatically enter standby mode; 2. Press the STANDBY button on the soundbar or POWER button onthe remote control to turn the soundbar on. Make your selection of the desired input modes by pressing the INPUT button on the remote or the power button on the soundbar. 3. To turn off, press and hold the STANDBY button or POWER button on remote control for about 2 seconds, the soundbar will enter standby mode, and then unplug it from the wall outlet.Playing Audio via BT Connection 1. Turn the soundbar on, press the STANDBY button on the soundbar or the POWER button on the remote control to select the Bluetooth mode. When Bluetooth is selected, “ bt“ will be displayed on the LED display and the blue LED on'the soundbar will flicker followed by a double beep sound to indicate Bluetooth pairing mode is now active. 2. Turn the Bluetooth of your device on, search for” ZEB-JUKE BAR 9200 DWS PRO DOLBY“ on your Bluetooth list, and then select Bluetooth connection. 3. When successfully paired, you will hear a tone and the “ bt “ on the screen stops flickering. Then the music on your phone or other compatible device that you selected can be played on the soundbar. 4. Use the volume buttons on the soundbar or onthe remote controller to adjust the volume. 5. The remote controller includes Bluetooth mode playback controls. Press and hold PAIR button on the remote controller for more than 2 seconds to disconnect the paired Bluetooth device or to reconnect with the previouslyconnected Bluetooth device. 6. If you wish, you can change the audio settings by using the relevant buttons on the remote controller. dd ewe )) — Cee |i Notes: 1. In Bluetooth mode, the remote can contro! music play/pause or select previous or next track. PREV/NEXT/ PLAY & PAUSE button only work in Bluetooth and USB mode; they have no function in other modes. 2. The above pairing procedure doesn't need to be repeated with the same connected device once paired. 3. If the connected device is switched off or manually disconnected, the soundbar will automatically enter pairing mode. 4. If the connected device is moved away from wireless range (up to 10 meters) of the soundbar, then it will get disconnected, and it will successfully connect to the device once you re-enter Bluetooth range. To connect to other devices, repeat the above pairing steps. 5. If a Bluetooth device has been connected before, the soundbar will connect to the last connected device. Unpair this connection to connect anew device. 6. There is no automatic shutdown in pairing mode. The soundbar will remain in pairing mode even if no device is paired, so switch it off if notin use.Playing Audio via USB Port The sound bar automatically switches to USB input mode with the LED display “US” when a USB flash drive is inserted. When a USB flash drive is inserted and soundbar is powered on, press the INPUT key on remote controller or STANDBY button on soundbar to switch to USB input mode (in case it doesn't change automatically) with LED display lighting up “ US “ and music in the USB will be automatically played. This mode cannot be used on the sound bar until an USB flash drive is connected. 1. Ensure that your USB flash drive contains MP3 audio file (other file types are not supported.) 2. Connect the USB flash drive to the USB port on the soundbar or by USB adapter (or your own USB extension cable connected to the USB port) and the music will be played automatically. 3. The remote control includes USB input mode playback controls.Using the Soundbar 2 Ol __| Ga PoMac Moole Doves Audio input (Aux) Connection 1. Firstly connect the soundbar to your PC, laptop, smart-phone, TV, or other audio devices by using an AUX cable provided. Make sure that these devices have both AUX IN and AUX out terminals. 2. Then press the STANDBY button or INPUT button on remote control to switch the soundbar to Aux mode, once the soundbar is connected in Aux mode, the screen will display “AU". And the music on your connected device will play. Playback can only be controlled on your connected device. Note: For some computers, you may need to access the audio control panel to manually set the soundbar as shown steps on above.HDMI (ARC) Mode 1. The soundbar supports HDMI (ARC) with audio return channel (ARC). You can hear the TV audio through your soundbar by using a single HDMI (ARC) cable. But on condition that your TVis ARC compliant. 2. Using a high speed HDMI (ARC) cable, connect the HDMI (ARC) connector on the soundbar to the HDMI (ARC) connector on the TV. The HDMI (ARC) connector on the TV might be labeled differently. For details, see the user manual of your TV. 3. When HDMI (ARC) is connected, TV sound setting in “sound output” mode should be set as , in addition, digital audio output mode should be set as or . When the HDMI (ARC) cable is connected, the TV digital audio output is set as Dolby or Auto mode. Then start playing music onthe TV. 4. Press “INPUT” button on the remote control or “STANDBY” button on soundbar to select Hd - HDMI (ARC) mode. Different TV might be different setting, please refer to your TV User Manual. 5. Use the volume buttons to adjust the volume to your requirements. 6. You can also change the audio settings by using the relevant buttons on the remote control.Note: 1. When connecting a device such as a TV/Set-top box/DVD/ game console with HDMI (ARC) cable, set the audio output mode of the device to Dolby or Auto mode . 2. The TVis connected to a HDMI (ARC) port with sound bar. Different TVs might have different setup menus, but the operation approach is the same. 3. If needs to connect set-up box meanwhile, please firstly connect the HDMI (ARC) connector and paired to the soundbar. Then connect the set-top box. Optical Mode Remove the cap of optical cable (keep the cap for the future use); check the direction of the plug. Connect the soundbar and TV with the optical cable. Use this mode to play music from a TV with optical digital output on the sound bar. In TV sound settings, select the soundbar optical connection (output for audio). When the optical cable is connected, the TV audio output is set to Dolby or Auto mode. The TV must have an optical digital output. Use the optical cable to make the connection as follows: 1. Connect the optical cable to the optical digital output of your TV. 2. Connect the optical cable to the optical digital input of your soundbar. 3. Switch on the TV set and the soundbar. Set the connected TV to “PCM Stereo”. Set the audio output mode as or. 4. Start playing on the TV. 5. Press “INPUT” button on the remote control or “STANDBY” button on the soundbar to select OP- OPTICAL mode. 6. Use the volume buttons to adjust the volume to your requirements. 7. You can also change the audio settings by using the relevant buttons on the remote control. Note: 1. When connecting a device such as a TV/Set-top box/DVD/ game console with optical cable, set the audio output mode of the device to Dolby or Auto mode (digital optical output). 2. Do not bend the optical cable, otherwise the cable inside will be damaged.Features: Wireless BT/USB/AUX/Optical IN/HDMI(ARC) 16.51cm Subwoofer Remote control Digital Wireless subwoofer LED Display Dolby Audio Wall Mountable Volume/Media Control Virtual 5.1 Specifications Output Power Subwoofer Soundbar Total Driver Size Subwoofer Soundbar Impedance Subwoofer Soundbar Frequency response S/N Ratio Separation File format support Line input Max supported memory size (USB) :80 watts :80 watts :160 watts :16.51cmx1 2(6.9cm x 4) + (1.9cm x 2) 230 :(40.x4) + (80x 2) :45Hz-20KHz :272dB :242dB :Mp3 :3.5mm, Optical IN, HDMI (ARC) :32GBBT name : ZEB-JUKE BAR 9200 DWS PRO DOLBY BT version :5.0 Product Dimension (Wx D x H) Subwoofer 2170x306 x 380mm Soundbar :900x115x62mm Net. Weight Subwoofer :4.1kg Soundbar :2.6kg Total :6.7kg Package Content Sound Bar :1Unit Subwoofer :1 Unit Remote Control 21 Unit Input cable 21 Unit Wall mount bracket with fasteners 21 PairTroubleshooting "archer input sources selected Sele an appropriate pu saUree The mute fncon sactvated Cancel the mate foneion The volume of sound bar or IVother device increase the volume level on sound ba i adjusted 00 by remote contol or an TV The power cable of the unis nat Take sure tate power cable of We un ‘There sno sound ‘Connect the input jack onthe sound ba and Input Jackson a playback device are connected cutput rom sound bar. the output jack onthe playback device. When sound bar and-TV or aher deves are ‘connected by an a cable dough TV (ARC port output, Select the correct auto input and Signals hat the sound bor eannot payback Dutput Make sure te dal audio output sting vinen being input fon the playback device to PCM format Sine the butput format of aur sound bare PCM i kis used the decoding format ofTV or other devices wll be adjusted te PCM sate, Ttesoundisaiones | 1 cuymeis not muted you play audio om TV through the sound bar, The automatic volume adjustment function activated To prevent excessive loudness, the Unie auromatially controls ts volume within urn up the volume as require. The sound barista close to another Nolen shear ligal or hgn frequency device Move tose devices anay rom the sound bar ‘The unis out othe operating range Use he remote control within the operating ange ‘Tre unitcannot be a persed by using The barnes are weak Replace with new bates Sneremone conta “he remote contol znsor ofthe sound bar ‘Adjust the lighting ale orreposon the sound bar. ‘exposed to iret sunight or song ighting, Make sure our product cannot be used in sunlight The TV cana: be ‘The units lacking the TVsremote Poston the unt sa that doesnot obstruct the TVs Speratedbysingthe | Corel sensor “ tmowenasence ne We remote conto Restor the sound bar andy paring again. You have rot enables the Bluetoat uneton ofthe device see Buetooth function ofthe deve snot actated, | the user manual ofthe device on how to enable the not pared or connectes correct function and correctly connected the device. Tre sound baris already connected wth another Bluetoots device. Disconneat the connected device, ard then try ag0n The unke connected te afferent ustooth ‘Uparthe Bluetooth davies hats euarty connec ‘Advice cannot vie, 2d pa ith the des red Bluetooth deuce connect the sound fornec the sound [ihe units to ar away fom the Bluetooth devee | Move te fluetooth devee dover to this unt Biuetooth device, A device emiting electromagnetic waves (euch as amicronave oven, areiss ‘sevice ana 30.05) may be places nearby Do notuse this unt near devices that emt ‘lecromagretic waves, ‘The Bluetooth device that you are using eee ee eee Use a Bluetooth device hat supports the protocol The connection profile regisered in the Delete the connection profile inthe Bluetooth Biuetooth devce may nat be functioning devi and then connect ne Eluetoetn device to correct for some reason. this une ‘Sound quality of uso playtroma connected Move tne deuce closer tate sound ba, Bluttooth devices ‘The Bluetooth reception epost for remove any obstacle between the cece and peor and connection ‘he sound bar The wolume onthe Bluetooth devlee may alse the volume on the Blustooth device Bluetooth sno sleted asthe npr source Sele he Bhustoth ashe np source. Playck one dees has nocbeen performed. | Perform playback on the deve No ound can be heard fs or sound beaks The sound ouput on te Sueoath Selec tis unt as ecu sever on (@ueroe mode) eace may notbe stots Unt the Buscar devin me Connect with the Blvetoth device ane more tie, “The unt may be oo far away rom he Tre uniemay bet Move the Bluetooth deve near this untA device emiting eetromagnetie waves (such asa mierowave oven, a wreless ‘evi ane 50.05) may be places nearby. HOMITV (ARO Mode Incorrect HDMI cable stused causing no signalto be snc to soundbar. Incorrect nput mde is select, 1. Make sue hat the user connected TV and sound barby 9 19-core HD ARC cable 2-The sound bar and TW are connectes through TVIARC) por output make sure thatthe TV's, ARC compan 4. Settne TY to HDMI ARC Sethe aude output mode af TV to PCM format. (Orreterto your TV user manual sound bar (OPTICAL Moe) (OPTICAL cable might be damaged and no signals received by the soundbar due to 3 faled connection and incorrect operavon ‘Replace the OPTICAL cable wit 2 new one your TV aude output to PCM forma (Pisveterto your TVuser manual ‘Tere sno sound fom ‘oun bar (U5# med) ss fle ype snot support & Soundbar doesnt surteh to USB input mode because other fe ypes a Sweh the input made once again then Disconnected between subwosfer and sound at Connection snot correct between subwoofer and sound bar 1.Tumm of sound bar and subwoofer by cemoving the AC pg rom the socket, 2, Make sure tnt sound bar and subwoofer are connected tothe electricity power atthe same time nd sate on sound bar an subwoofer again 5 Press ana hold the subwooter rear plata WPS buttonto reste conmecvon, otha sound bar and subwoofer canbe reconnected again ISO 9001:2015 Certified Company www.zebronics.com