Distribution Overhead Standard

Overhead Construction

Info Zone Record Number: R1563643

Version Number: 1.0
Date: February 2020
COPYRIGHT
This document is protected by copyright vested in TasNetworks Pty Ltd. No part of the document may be reproduced or
transmitted in any form by any means including, without limitation, electronic, photocopying, recording or otherwise,
without the prior written permission of TasNetworks. Any breach of the above obligations may be restrained by legal
proceedings seeking remedies including injunctions, damages and costs.

DISCLAIMER
UNCONTROLLED WHEN PRINTED
This document has been prepared and made available solely for information purposes. Whist care was taken in the
preparation of the information in this document, and it is provided in good faith, TasNetworks make no representation
or warranty (express or implied) as to the accuracy, reliability, or completeness of the information contained in this
document, or its suitability for any intended purpose. TasNetworks (which for the purposes of this disclaimer, includes
all their related bodies corporate, officers, employees, contractors, agents and consultants, and those of their bodies
corporate) shall have no liability for any loss or damage (including without limitation, liability to any person by reason
of negligence or negligent misstatement) for any statements, opinions, information or matter (expressed or implied)
arising out of, contained in, or derived from, or for any omissions from, the information in this document, except to the
extent that liability under any applicable statute cannot be excluded. In all cases, anyone proposing to rely on or use
the information in this document should independently verify and check the accuracy, completeness, reliability and
suitability of that information and the reports and other information relied on by TasNetworks in preparing this
document, and should obtain independent and specific advice from appropriate experts or other sources.

Authorisations
Action Name and title Date
Prepared by Electro Technology Consultants February 2020
Reviewed by Angus Ketley – Assert Engineering Leader Primary February 2020
Darryl Munro – Leader Asset Strategy and Performance February 2020
Authorised by Eddie Jager - LeaderEngineering February 2020
Review cycle 5 Years

Responsibilities
This document is the responsibility of the Asset Strategy and Performance, Tasmanian Networks
Pty Ltd, ABN 24 167 357 299 (hereafter referred to as "TasNetworks").
Please contact the Asset Strategy Team with any queries or suggestions.
 Implementation All TasNetworks staff and contractors.
 Compliance All Group Managers.

© Tasmanian Networks Pty Ltd 2017

Record of revisions

Section number Details

Preface Page 0-3

Overhead Distribution Construction Standard Section 0

Preface Page 0-4

Overhead Distribution Construction Standard Section 0

Table of Contents

Section
0 Preface

1 Services

2 LV Constructions
3 11kV/22kV & SWER Constructions

4 33kV Constructions
5 Switches, Fuses, Reclosers & Sectionalisers

6 Pole Substations/Transformers
7 Other Pole-mounted Plant, UG Cable Terminations and Attachments

8 Communications

9 Conductors, Cables, Connectors and Associated Fittings

10 Poles

11 Stays
12 Earthing

13 Line Components
14 Clearances

Preface Page 0-5

Preface Page 0-6
Overhead Distribution Construction Standard Section 0

0 SECTION 0 PRELUDE
This Standard contains the approved construction process considerations and detailed standard
arrangements for Overhead Distribution assets within the TasNetworks electrical network.
The information contained in this Introduction is intended to provide guidelines on the format,
contents and use of the Standard.
TasNetworks may update this standard for the purposes of design improvement and technology
advances. It is the responsibility of the designer to ensure the latest TasNetworks’ Standard is used
for distribution design.

Scope
The Distribution Design Standard for Overhead Distribution applies to the following asset types:
 High voltage overhead lines, i.e. 22 kV, 11 kV and SWER
 Low voltage overhead lines
 Pole-mounted plant, e.g. transformers, switches, reclosers, regulators and fuses
 Communications cables on poles (e.g. pilot cables, optical fibres, NBN cables).
 Streetlight bracket attachments.
Overhead materials shall comply with TasNetworks’ current periodic contract for distribution
equipment and specifications.
For interconnections to other TasNetworks electrical reticulation refer to the following standards:
 Underground cable terminations on poles – for further detail refer to the Distribution
Design Standard for Underground System
 Private installations - for further detail refer to the Distribution Design Standard for Planning
The application of this design standard applies for both greenfield and brownfield sites, where the
HV and LV reticulation is intended to be overhead. All designs shall be compliant in full with this
standard. All non-compliance’s are required to receive prior approval from the TasNetworks
Planning, Asset Strategy and Asset Engineering Team.

Change Process for this Standard

1. Overhead Standards will be reviewed and updated as needed with changes at a minimum
every 6 months.
2. The release of updates to the Standards will be done in the months of March and
September in conjunction with the Design Standard:
3. Change requests to Construction Standard will be sent to Asset Engineering – all changes
will be recorded in the change management register.
4. Change requests will be reviewed and assessed as to whether they are for:
 Immediate consideration
 Consideration in time for 6 monthly release
5. 1 month prior to the release time all “less urgent” change proposals will be considered and
any changes to the likes drawings undertaken. A formal technical review forum will be held
with the following attendees:

Preface Page 0-7

Overhead Distribution Construction Standard Section 0

 Field Engineering
 Field Operations
 Asset Strategy
6. The impacts of any changes to the Construction Standard on the Design Standard will be
considered in the review process.
7. In the 6 monthly review and immediate change requests consultation will be undertaken
with:
 Field Engineering
 Field Operations – construction personnel
 External contractors (as appropriate)
8. Asset Strategy will endorse proposed changes to the Construction as a part of the review /
update process nominally within 2 weeks.
9. Changes in material supply contracts will be entered into the change register and included
in 6 monthly review particularly for:
 Impacts on drawings to be considered when supply contract changes
10. Drawing changes will be authorised by the Principal Engineer within Overhead Group.
11. The Asset Engineering leader will recommend to the Engineering Team Leader for the
adoption of a new version.

Preface Page 0-8

Overhead Distribution Construction Standard Section 1

1. SECTION 1 – SERVICES

1. SECTION 1 – SERVICES ........................................................................................................................... 1

1.1 Mains Pole End Service Constructions ...................................................................................... 2
1.2 House / Building End Constructions ........................................................................................ 16
1.3 Customer Poles ......................................................................................................................... 22
1.4 Underground Services from Poles ........................................................................................... 28
1.5 Service Cable & Fittings ............................................................................................................ 38
1.6 Stringing of Service Conductors ............................................................................................... 65
1.7 Clearances Service Conductors ................................................................................................ 69
1.8 Construction Practices.............................................................................................................. 74

Services Page 1- 1
Overhead Distribution Construction Standard Section 1

1.1 Mains Pole End Service Constructions

LVABC Mains to 25mm2 Service – Pole End

Services Page 1- 2
Overhead Distribution Construction Standard Section 1

LVABC Mains to 25mm2 Service – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SERV/25/1/PLM S 97C 145606 Service Strain Clamp 2c x 25mm2 AL XLPE 1
1 phase - excludes cable 79B 325631 Bolt Open Eye M16 X 350 1 (or AR)
Pole End 79A 325630 Bolt Open Eye M16 X 250 AR
79C 325632 Bolt Open Eye M16 X 400 AR
102D 325619 Open Eye Nut M16 AR
82A 40441 Nut M16 1 (or AR)
94D 145619 IPC 25-95mm2 main 6-35mm2 tee 2 (or AR)
94G 145659 IPC 50-150mm2 main 6-35mm2 tee AR

Consumer End 97E 145663 Service Strain Insulated Clamp 2c x 25mm2 AL XLPE 1
29B 323744 Service Bracket House End (Type 2) 1
29K 323401 Service Fuse Bracket 3 ph Michaud 1
75N 32288 Bolt Hex M16 X 350 2
84B 50226 Coach Screw M10 X 65 2
94K 145654 IPC - Service Neutral Connector (House End) 1 (or AR)
#N/A 221760 Service Fuse 100amp Michaud 1

SERV/25/2/PLM S 97D 145605 Service Strain Clamp 4c x 25mm2 AL XLPE 1

2 phase - excludes cable 79B 325631 Bolt Open Eye M16 X 350 1 (or AR)
Pole End 79A 325630 Bolt Open Eye M16 X 250 AR
79C 325632 Bolt Open Eye M16 X 400 AR
102D 325619 Open Eye Nut M16 AR
82A 40441 Nut M16 1 (or AR)
94D 145619 IPC 25-95mm2 main 6-35mm2 tee 3 (or AR)
94G 145659 IPC 50-150mm2 main 6-35mm2 tee AR

Consumer End 97F 145664 Service Strain Insulated Clamp 4c x 25mm2 AL XLPE 1
29B 323744 Service Bracket House End (Type 2) 1
29K 323401 Service Fuse Bracket 3 ph Michaud 1
75N 32288 Bolt Hex M16 X 350 2
84B 50226 Coach Screw M10 X 65 2
94K 145654 IPC - Service Neutral Connector (House End) 1 (or AR)
#N/A 32159 Bolt Hex M8 X 150 GMS 1
221760 Service Fuse 100amp Michaud 2
100D 168017 End Cap No.2 8/17mm dia heatshrink 2

SERV/25/3/PLM S 97D 145605 Service Strain Clamp 4c x 25mm2 AL XLPE 1

3 phase - excludes cable 79B 325631 Bolt Open Eye M16 X 350 1 (or AR)
Pole End 79A 325630 Bolt Open Eye M16 X 250 AR
79C 325632 Bolt Open Eye M16 X 400 AR
102D 325619 Open Eye Nut M16 AR
82A 40441 Nut M16 1 (or AR)
94D 145619 IPC 25-95mm2 main 6-35mm2 tee 3 (or AR)
94G 145659 IPC 50-150mm2 main 6-35mm2 tee AR

Consumer End 97F 145664 Service Strain Insulated Clamp 4c x 25mm2 AL XLPE 1
29B 323744 Service Bracket House End (Type 2) 1
29K 323401 Service Fuse Bracket 3 ph Michaud 1
75N 32288 Bolt Hex M16 X 350 2
84B 50226 Coach Screw M10 X 65 2
94K 145654 IPC - Service Neutral Connector (House End) 1 (or AR)
#N/A 32159 Bolt Hex M8 X 150 GMS 1
221760 Service Fuse 100amp Michaud 3

Services Page 1- 3
Overhead Distribution Construction Standard Section 1

LVABC Mains / Service to Copper/PVC Service or Consumer Mains

Services Page 1- 4
Overhead Distribution Construction Standard Section 1

LVABC Mains – Service Cable Junction Boxes (Obsolete)

Services Page 1- 5
Overhead Distribution Construction Standard Section 1

Open Wire Mains to 25mm2 LVABC Service from Pole

Services Page 1- 6
Overhead Distribution Construction Standard Section 1

Open Wire Mains to 25mm2 LVABC Service from Pole – Material List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SERV/25/1/PLM S 97C 145606 Service Strain Clamp 2c x 25mm2 AL XLPE 1
1 phase - excludes cable 79B 325631 Bolt Open Eye M16 X 350 1 (or AR)
Pole End 79A 325630 Bolt Open Eye M16 X 250 AR
79C 325632 Bolt Open Eye M16 X 400 AR
102D 325619 Open Eye Nut M16 AR
82A 40441 Nut M16 1 (or AR)
94F 145662 IPC Al bare main 6-35mm2 tee 2 (or AR)
94E 145655 IPC Cu bare main 6-35mm2 tee AR

Consumer End 97E 145663 Service Strain Insulated Clamp 2c x 25mm2 AL XLPE 1
29B 323744 Service Bracket House End (Type 2) 1
29K 323401 Service Fuse Bracket 3 ph Michaud 1
75N 32288 Bolt Hex M16 X 350 2
84B 50226 Coach Screw M10 X 65 2
94K 145654 IPC - Service Neutral Connector (House End) 1 (or AR)
#N/A 221760 Service Fuse 100amp Michaud 1

SERV/25/2/PLM S 97D 145605 Service Strain Clamp 4c x 25mm2 AL XLPE 1

2 phase - excludes cable 79B 325631 Bolt Open Eye M16 X 350 1 (or AR)
Pole End 79A 325630 Bolt Open Eye M16 X 250 AR
79C 325632 Bolt Open Eye M16 X 400 AR
102D 325619 Open Eye Nut M16 AR
82A 40441 Nut M16 1 (or AR)
94F 145662 IPC Al bare main 6-35mm2 tee 3 (or AR)
94E 145655 IPC Cu bare main 6-35mm2 tee AR

Consumer End 97F 145664 Service Strain Insulated Clamp 4c x 25mm2 AL XLPE 1
29B 323744 Service Bracket House End (Type 2) 1
29K 323401 Service Fuse Bracket 3 ph Michaud 1
75N 32288 Bolt Hex M16 X 350 2
84B 50226 Coach Screw M10 X 65 2
94K 145654 IPC - Service Neutral Connector (House End) 1 (or AR)
#N/A 32159 Bolt Hex M8 X 150 GMS 1
221760 Service Fuse 100amp Michaud 2
100D 168017 End Cap No.2 8/17mm dia heatshrink 2

SERV/25/3/PLM S 97D 145605 Service Strain Clamp 4c x 25mm2 AL XLPE 1

3 phase - excludes cable 79B 325631 Bolt Open Eye M16 X 350 1 (or AR)
Pole End 79A 325630 Bolt Open Eye M16 X 250 AR
79C 325632 Bolt Open Eye M16 X 400 AR
102D 325619 Open Eye Nut M16 AR
82A 40441 Nut M16 1 (or AR)
94F 145662 IPC Al bare main 6-35mm2 tee 4 (or AR)
94E 145655 IPC Cu bare main 6-35mm2 tee AR

Consumer End 97F 145664 Service Strain Insulated Clamp 4c x 25mm2 AL XLPE 1
29B 323744 Service Bracket House End (Type 2) 1
29K 323401 Service Fuse Bracket 3 ph Michaud 1
75N 32288 Bolt Hex M16 X 350 2
84B 50226 Coach Screw M10 X 65 2
94K 145654 IPC - Service Neutral Connector (House End) 1 (or AR)
#N/A 32159 Bolt Hex M8 X 150 GMS 1
221760 Service Fuse 100amp Michaud 3

Services Page 1- 7
Overhead Distribution Construction Standard Section 1

Open Wire Mains to 25mm2 LVABC Service from Crossarm

Services Page 1- 8
Overhead Distribution Construction Standard Section 1

Open Wire Mains to 25mm2 LVABC Service from Crossarm Strap

Services Page 1- 9
Overhead Distribution Construction Standard Section 1

Midspan Service

Services Page 1- 10
Overhead Distribution Construction Standard Section 1

LVABC Mains to Large 50mm2 or 95 mm2 Services – Pole End

Services Page 1- 11
Overhead Distribution Construction Standard Section 1

LVABC Mains to Large 50mm2 or 95 mm2 Services – Pole End

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
MIDSERV/25/1/PLM S 97C 145606 CLAMP,TENSION 2 X 25MM2 - 2 X35MM2 ABCSC 3
1 phase - excludes cable 50A 438912 WIRE ROPE,STRAND 3/2.75 G1320 3000M DRUM 40
Pole End 53J 148501 DEADEND,FULL TENSION 3/2.75 GAL.COND 2
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1 (or AR)
79A 325630 EYE-BOLT,OPEN M16 X 250MM FIXED WASHER AR
79C 325632 EYE-BOLT,OPEN M16 X 450MM FIXED WASHER AR
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK AR
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
94D 145619 CONNECTOR,IPC LV ABC 2 (or AR)
94G 145659 CONNECTOR,IPC LV ABC K-443 FIG.1 AR
94F 145662 CONNECTOR,IPC LV ABC/PVC R236 ALUMN AR
94E 145655 CONNECTOR,IPC BARE MAINS-SERVICE R235 AR

Consumer End 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
29B 323744 BRACKET,CONNECT HOUSE SERVICE SHORT HOOK 1
29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
97E 145663 CLAMP,SERVICE STRAIN 2 X 10-35MM2 XLPE 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
84B 50226 COACH SCREW,HEX HEAD 10MM X 65MM GAL 2
94K 145654 CONNECTOR,IPC HOUSE SERVICE 1
#N/A 221760 FUSEHOLDER,B&C 100A/480V 57X22 FERRULE 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
MIDSERV/25/3/PLM S 97D 145605 CLAMP,TENSION 4 X 25MM2 - 4 X35MM2 ABCSC 3
3 phase - excludes cable 50A 438912 WIRE ROPE,STRAND 3/2.75 G1320 3000M DRUM 40
Pole End 53J 148501 DEADEND,FULL TENSION 3/2.75 GAL.COND 2
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1 (or AR)
79A 325630 EYE-BOLT,OPEN M16 X 250MM FIXED WASHER AR
79C 325632 EYE-BOLT,OPEN M16 X 450MM FIXED WASHER AR
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK AR
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
94D 145619 CONNECTOR,IPC LV ABC 4 (or AR)
94G 145659 CONNECTOR,IPC LV ABC K-443 FIG.1 AR
94F 145662 CONNECTOR,IPC LV ABC/PVC R236 ALUMN AR
94E 145655 CONNECTOR,IPC BARE MAINS-SERVICE R235 AR

Consumer End 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
29B 323744 BRACKET,CONNECT HOUSE SERVICE SHORT HOOK 1
29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
97F 145664 CLAMP,SERVICE STRAIN 4 X 10-35MM2 XLPE 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 3
84B 50226 COACH SCREW,HEX HEAD 10MM X 65MM GAL 2
94K 145654 CONNECTOR,IPC HOUSE SERVICE 1
#N/A 221760 FUSEHOLDER,B&C 100A/480V 57X22 FERRULE 3
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4

Services Page 1- 12
Overhead Distribution Construction Standard Section 1

Service Pole Intermediate for 25mm2 LVABC Service

Services Page 1- 13
Overhead Distribution Construction Standard Section 1

Service pole intermediate for Copper / PVC Service Cable

Services Page 1- 14
Overhead Distribution Construction Standard Section 1

Service Pole Steel Raiser Bracket

Services Page 1- 15
Overhead Distribution Construction Standard Section 1

1.2 House / Building End Constructions

LVABC Service with Mains Connection Box - Load < 100 A / phase

Services Page 1- 16
Overhead Distribution Construction Standard Section 1

LVABC Service with Copper Tails - Load < 100 A / phase (Obsolete)

Services Page 1- 17
Overhead Distribution Construction Standard Section 1

Copper / PVC Service – House End (Obsolete)

Services Page 1- 18
Overhead Distribution Construction Standard Section 1

Michaud Service Fuse Retrofit

Services Page 1- 19
Overhead Distribution Construction Standard Section 1

Fuse Bracket Fitted to Service Raiser Bracket

Services Page 1- 20
Overhead Distribution Construction Standard Section 1

Large LVABC – Service Attachment at Consumer End

Services Page 1- 21
Overhead Distribution Construction Standard Section 1

1.3 Customer Poles

Temporary Service Poles

Services Page 1- 22
Overhead Distribution Construction Standard Section 1

Temporary Service Poles Continued

Services Page 1- 23
Overhead Distribution Construction Standard Section 1

Customer Poles

ACCEPTABLE POLE TYPES AND STRENGTHS

POLE MINIMUM GIRTH (mm) HEIGHT OF POLE MAX. ALLOWABLE HORIZONTAL

DEPTH IN
LENGTH POLE TYPE 2m FROM BUTT ABOVE GROUND FORCE AT POLE TOP
AT TOP GROUND 'D' (m)
(m) (OVER SAPWOOD) (m) (kN)

GALVANISED STEEL
8.0 125x125x5.0 SHS - - 1.4 6.6 2.0
GRADE 350

8.0 P.I. HARDWOOD (4kN) * 635 810 1.5 6.5 4.0

8.0 P.I. HARDWOOD (6kN) * 635 900 1.5 6.5 6.0
9.0 P.I. HARDWOOD (4kN) * 635 860 1.5 7.5 4.0
9.0 P.I. HARDWOOD (6kN) * 750 975 1.65 7.35 6.0
10.5 P.I. HARDWOOD (4kN) * 655 920 1.65 8.85 4.0
10.5 P.I. HARDWOOD (6kN) * 775 1040 1.8 8.7 6.0
12.0 P.I. HARDWOOD (4kN) * 675 975 1.8 10.2 4.0
12.0 P.I. HARDWOOD (6kN) * 800 1100 1.8 10.2 6.0

Services Page 1- 24
Overhead Distribution Construction Standard Section 1

Customer Poles Continued

Services Page 1- 25
Overhead Distribution Construction Standard Section 1

Fuse Mounting on Steel Customer Poles

Services Page 1- 26
Overhead Distribution Construction Standard Section 1

Steel Pole Intermediate Neutral Bonding

Services Page 1- 27
Overhead Distribution Construction Standard Section 1

1.4 Underground Services from Poles

Underground Services to Loads < 100 A / Phase

Services Page 1- 28
Overhead Distribution Construction Standard Section 1

Underground Services to Loads < 100A / Phase

Services Page 1- 29
Overhead Distribution Construction Standard Section 1

Underground Services from LVABC Mains Loads < 100A / Phase

Services Page 1- 30
Overhead Distribution Construction Standard Section 1

Underground Service from LVABC Mains - Loads < 100 A / phase

Services Page 1- 31
Overhead Distribution Construction Standard Section 1

Underground services to Loads > 100 A / phase

Services Page 1- 32
Overhead Distribution Construction Standard Section 1

Underground Service from LVABC Mains to loads > 100 A / phase

Services Page 1- 33
Overhead Distribution Construction Standard Section 1

Underground Service from LVABC Mains to loads > 100 A / phase

Services Page 1- 34
Overhead Distribution Construction Standard Section 1

Underground Service to Telecommunications Cabinet

Services Page 1- 35
Overhead Distribution Construction Standard Section 1

Underground Service to Telecommunications Cabinet

Services Page 1- 36
Overhead Distribution Construction Standard Section 1

Underground Service to Telecommunications Cabinet

Services Page 1- 37
Overhead Distribution Construction Standard Section 1

1.5 Service Cable & Fittings

Approved Service Conductors
The following types of service cables are approved for use:

a) LVABC Aluminium / XPLE cable – 2, 3 & 4 core cable.

b) Insulated conductors that include 2, 3 & 4 core twisted or figure 8 copper, with PVC insulation.
c) Single core conductors comprised of copper aerial conductors with a black PVC cover.
CAUTION: This PVC covering does not reliably provide for 250V insulation as must be treated
as bare conductor. These conductors have been traditionally used for “open wire” services
since mid 1976.

Bare service conductors are not permitted for either new services or aerial consumers mains,
however have been installed in the past (prior to 1/6/87). Where bare service conductors require
augmenting they are to be replaced with insulated conductors.

Where distribution poles are replaced and with bare service conductor attached, and it is not
economic to replace the bare service cables with approved service cables, the following minimum
conductor vertical separation it is to be achieved.

Vertical Separation (mm) Span Range (m)

400 Up to 10
500 10 to 25
600 25 to 45
700 45 to 60

Services Page 1- 38
Overhead Distribution Construction Standard Section 1

Service Cable Details

SERVICE CONDUCTOR SERVICE FOR VOLT DROP

XLPE INSULATED
SECTIONAL CONTINIOUS MAX. SIZE mV/Am
ALUMINIUM CORE OVERALL
No OF AREA MASS CURRENT OF V75
DIAMETER
CORES PER PHASE kg/m RATING UNENCLOSED
2 mm
METRIC IMPERIAL mm AMPS/PHASE CONSUMER MAINS ph 1 ph 3
2
mm

2 25 25 17.2 0.2 125 2.89

* 3 25 25 18.5 0.3 105 2.59
4 25 25 20.7 0.4 105 2.59 2.31

SERVICE CONDUCTOR
HARD DRAWN COPPER
V75 INSULATED
0.6/1kV

* 7/1.35 10 6.3 x 13.5 0.236 80 - 4.42

2
* 7/.044 6.8 6.0 x 12.5 0.168 65 -
7/1.35 10 14 0.354 60 - 4.42
3
* 7/.044 6.8 12.5 0.252 55 -
*7/1.35 10 15.6 0.472 60 - 4.42 3.83
4
* 7/.044 6.8 14 0.336 55 -
7/1.70 16 7.3 x 14.6 0.36 110 16 2.83 -
2
* 7/.064 14.5 7.5 x 15.0 0.336 100 -
7/1.70 16 16 0.54 100 35 2.83 -
3
* 7/.064 14.5 16 0.505 100 -
7/1.70 16 18 0.72 100 35 2.83 2.45
4
* 7/.064 14.5 18 0.67 100 -
*7/1.35 10 6.3 0.118 85 - 4.42 3.83
1
* 7/.044 6.8 6 0.084 65 -
7/1.70 16 7.3 0.18 110 - 2.83 2.45
1
* 7/.064 14.5 7.5 0.168 100 -
19/1.35 25 9.4 0.3 150 70 1.74 1.5
1
* 7/.080 22.7 9 0.247 135 -
19/1.78 50 12 0.511 210 120 1.12 0.97
1
* 19/.064 38.4 11.5 0.427 180 -
19/2.14 70 13.8 0.722 265 185 0.89 0.77
1
* 19/.083 66.3 14.5 0.668 250 -

Services Page 1- 39
Overhead Distribution Construction Standard Section 1

LVABC 25mm2 Aluminium / XPLE Service Cables

Services Page 1- 40
Overhead Distribution Construction Standard Section 1

Comparison of single core Copper cable to nearest Aluminium Equivalent

COPPER ALUMINIUM

SIZE CURRENT SIZE CURRENT

STRANDING STRANDING
mm 2 CAP. AMPS mm 2 CAP. AMPS

6 7/1.04 62 10
10 7/1.35 84 16 7/1.70 87
16 7/1.70 111 25 19/1.35 120
25 19/1.35 152 35 19/1.53 140
35 19/1.53 177 50 19/1.78 166
50 19/1.78 210 70 19/2.14 208
70 19/2.14 265 120 37/2.03 290
95 19/2.52 314 150 37/2.25 327
120 37/2.03 368 185 37/3.52 372
150 37/2.25 414 240 61/2.25 450

Services Page 1- 41
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets

Services Page 1- 42
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets (Obsolete)

Services Page 1- 43
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets (Obsolete)

Services Page 1- 44
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets (Discontinued)

Services Page 1- 45
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets

Services Page 1- 46
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets

Services Page 1- 47
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets

Services Page 1- 48
Overhead Distribution Construction Standard Section 1

Service Hooks & Service Fuseholder Brackets

Services Page 1- 49
Overhead Distribution Construction Standard Section 1

Strain & Suspension Clamps for 25mm2 LVABC Services

Services Page 1- 50
Overhead Distribution Construction Standard Section 1

Strain & Suspension Clamps for 25mm2 LVABC Services

Services Page 1- 51
Overhead Distribution Construction Standard Section 1

Insulated Strain & Suspension Clamps for 25mm2 LVABC Services

Services Page 1- 52
Overhead Distribution Construction Standard Section 1

Insulated Strain & Suspension Clamps for 25mm2 LVABC Services

Services Page 1- 53
Overhead Distribution Construction Standard Section 1

Helical Service Terminations for Copper / PVC Service Cables

Services Page 1- 54
Overhead Distribution Construction Standard Section 1

Insulation Piercing Connectors for LVABC Service Cable

Services Page 1- 55
Overhead Distribution Construction Standard Section 1

Insulation Piercing Connectors for LVABC Service Cable

Services Page 1- 56
Overhead Distribution Construction Standard Section 1

Service Fuseholders

NORMAL FUSE CARTRIDGE APPLICATION

100 AMP CARTRIDGE

SIZE 57.0mm LONG x 22.2mmØ ALL CONSUMER MAINS
S.I. No. 22.24.27

Services Page 1- 57
Overhead Distribution Construction Standard Section 1

Service Fuseholders (Obsolete)

NORMAL FUSE CARTRIDGE APPLICATION

30 AMP CARTRIDGE 30 AMP OUTDOOR SERVICE FUSES ON
SIZE 57.0mm x 22.2mm DIA ANY OLD SIZE STRAND CONSUMERS
S.I. 22.23.90 MAINS. REFER TO INSPECTOR/DISTRICT
MECHANIC FOR FOLLOW UP INSPECTION.
OUTDOOR SERVICE FUSE FOR THE
FOLLOWING SIZES OF CONSUMERS
2
MAINS: 6mm ; 7/.036. REFER TO
INSPECTOR/DISTRICT MECHANIC FOR
50 AMP CARTRIDGE FOLLOW UP INSPECTION IF 50 AMP
SIZE 57.0mm x 22.2mm DIA FUSE IS USED TO REPLACE A SMALLER
S.I. 22.23.92 FUSE.
OUTDOOR SERVICE FUSE ON RESIDENTIAL
PREMISES WITH THE FOLLOWING SIZES OF
COPPER CONSUMERS MAINS:
(V75 UNENCLOSED)
63 AMP CARTRIDGE
2
SIZE 57.0mm x 22.2mm DIA 10mm , 7/.044 & 7/.052 2 CORE
2
S.I. 22.23.93 16mm , 7/.064 & 3 & 4 CORE
80 AMP CARTRIDGE
SIZE 57.0mm x 22.2mm DIA 16mm 2 , 7/.064 2 CORE
S.I. 22.23.95 25mm 2 , 19/.044, 19/.052 3 & 4 CORE
100 AMP CARTRIDGE
SIZE 57.0mm x 22.2mm DIA 25mm 2 , 19/044, 19/.052 2 CORE
2
S.I. 22.24.27 35mm , 19/.064, 3 & 4 CORE

Services Page 1- 58
Overhead Distribution Construction Standard Section 1

Service Fuseholder (Obsolete)

FUSE FITTING NORMAL FUSE CARTRIDGE APPLICATION

STANGER 55 AMP 5 AND 10 AMP CARTRIDGE
SIZE 50.8mm x 14.3mm OUTDOOR FUSE ON MINOR ROADLANTERN
5A S.I. No 22.23.51 BRACKETS, NO INTERNAL FUSE EXISTS.
10A S.I. No 22.23.52
SEE NOTE ABOVE 30 AMP CARTRIDGE TO REPLACE EXISTING 30 AMP OUTDOOR
RE DE-RATING OF SIZE 50.8mm x 14.3mm DIA SERVICE FUSES ON ANY OLD SINGLE STRAND
THIS FUSE S.I. 22.23.60 CONSUMER'S MAINS. REFER TO INSPECTOR/
45 AMP CARTRIDGE DISTRICT MECHANIC FOR FOLLOW UP
S.I. 22.23.57 INSTRUCTION.
OUTDOOR SERVICE FUSE FOR THE
FOLLOWING SIZES OF CONSUMERS MAINS:
50 AMP CARTRIDGE 6mm 2 : 7/.036. REFER TO THE
SIZE 50.8mm x 14.3mm DIA INSPECTOR/DISTRICT MECHANIC FOR
S.I. 22.23.61 FOLLOW UP INSPECTION IF 50 AMP FUSE
IS USED TO REPLACE A SMALLER FUSE.

45 AMP
S.I. 22.23.57
OUTDOOR SERVICE FUSE ON RESIDENTIAL
STANGER 100 AMP PREMISES WITH THE FOLLOWING SIZES OF
COPPER CONSUMERS MAINS: (V75 UNENCLOSED)
S.I. No's
2
63 AMP CARTRIDGE 10mm , 7/.044 & 7/.052 2 CORE
22.24.45 SIZE 76.2mm x 20.6mm DIA 16mm 2 , 3 & 4 CORE
2
80 AMP CARTRIDGE 16mm , 7/.064 2 CORE
22.24.46 2
SIZE 76.2mm x 20.6mm DIA 25mm , 3 & 4 CORE
2
100 AMP CARTRIDGE 25mm , 19/044, 19/.052 2 CORE
22.24.47 SIZE 76.2mm x 20.6mm DIA 35mm 2 , 3 & 4 CORE

Services Page 1- 59
Overhead Distribution Construction Standard Section 1

Service Fuseholder (Obsolete)

NORMAL FUSE CARTRIDGE APPLICATION

30 AMP OUTDOOR SERVICE FUSES ON
30 AMP CARTRIDGE
ANY OLD SIZE STRAND CONSUMERS
SIZE 57.0mm x 22.2mm DIA
MAINS. REFER TO INSPECTOR/DISTRICT
S.I. 22.23.90
MECHANIC FOR FOLLOW UP INSPECTION.
OUTDOOR SERVICE FUSE FOR THE
FOLLOWING SIZES OF CONSUMERS
2
50 AMP CARTRIDGE MAINS: 6mm ; 7/.036. REFER TO
SIZE 57.0mm x 22.2mm DIA INSPECTOR/DISTRICT MECHANIC FOR
S.I. 22.23.92 FOLLOW UP INSPECTION IF 50 AMP
FUSE IS USED TO REPLACE A SMALLER
FUSE.
OUTDOOR SERVICE FUSE ON RESIDENTIAL
PREMISES WITH THE FOLLOWING SIZES OF
COPPER CONSUMERS MAINS:
(V75 UNENCLOSED)
60 AMP CARTRIDGE
10mm 2 , 7/.044 & 7/.052 2 CORE
SIZE 57.0mm x 22.2mm DIA 2
S.I. 22.23.93 16mm , 7/.064 & 3 & 4 CORE
80 AMP CARTRIDGE
16mm 2 , 7/.064 2 CORE
SIZE 57.0mm x 22.2mm DIA 2
S.I. 22.23.95 25mm , 19/.044, 19/.052 3 & 4 CORE
100 AMP CARTRIDGE 2
25mm , 19/044, 19/.052 2 CORE
SIZE 57.0mm x 22.2mm DIA
35mm 2 , 19/.064, 3 & 4 CORE
S.I. 22.24.27

Services Page 1- 60
Overhead Distribution Construction Standard Section 1

Service Fuse Elements

Services Page 1- 61
Overhead Distribution Construction Standard Section 1

Fuse Identification Tags

Services Page 1- 62
Overhead Distribution Construction Standard Section 1

Service Raiser Brackets

Services Page 1- 63
Overhead Distribution Construction Standard Section 1

Service Raiser Brackets

Services Page 1- 64
Overhead Distribution Construction Standard Section 1

1.6 Stringing of Service Conductors

2C 25mm2 LVABC Service Stringing to Building

Services Page 1- 65
Overhead Distribution Construction Standard Section 1

3C & 4C 25mm2 LVABC Service Stringing to Building

Services Page 1- 66
Overhead Distribution Construction Standard Section 1

2, 3 & 4 core 25mm2 LVABC Stringing Pole to Pole

Services Page 1- 67
Overhead Distribution Construction Standard Section 1

Indicative Maximum Span Length – TasNetworks Pole to Customer Pole

Services Page 1- 68
Overhead Distribution Construction Manual Section 1

1.7 Clearances Service Conductors

Overhead services cleareance requirements

Insulated Service Conductor

Clearance Type Location Description Direction
Clearance

At centre of carriageway Vertically 5.5m

At kerb line (bottom of kerb) Vertically 4.6m
Roads At verge Vertically 3.0m
At fence alignment Vertically 3.0m
Ground
At fence alignment (from top of fence) Vertically 2.0m

Private driveways and land traversable by vehicles more than 3m in height

Vertically 4.6m
Other (except service stations, farms, caravan parks and other high-risk locations)

Areas not normally accessible to vehicles Vertically 3.0m

Vertically 3.0m
Unroofed terraces, balconies, sun decks, paved areas etc. that are subject to pedestrian traffic only
Horizontally 1.0m
Vertically 2.0m
Roofs or similar structure not normally accessible to persons but on which a person may stand
Horizontally 1.0m
Structures / Buildings Covered places normally accessible to persons, including for example windows capable of being
In any direction 1.0m
opened, roofed open verandahs and covered balconies
Blank walls / windows which cannot be opened In any direction 0.1m
Vertically 2.0m
Other structures not normally accessible to persons
Horizontally 1.0m
Gas Storage Cylinders Horizontally 1.5m
Vertically Not permitted
Swimming pools.
Horizontally 3.5m
Vertically 0.6m
Rotary clothes line, Radio/TV antennae.
Other High-Risk Horizontally 0.1m
Situations Areas where trailable sailing craft, farm machinery and irrigation pipes may be used Vertically 5.5m
Vertically
Service Poles in the vicinity of OH conductors Refer 10.1.1
Horizontally
Caravan parks Vertically 5.5m
Service station and farm driveways Vertically 5.5m
Telecommunications Telephone or Broadband Communications Cables Vertically 1.2m
Notes:
1. All clearances are a minimum to which a conductor may sag or swing under any of the following conditions:
a. Rated maximum conductor temp in still air (75⁰C)
b. Conductor temperature of 15⁰C with a wind pressure of 350Pa (blowout condition)
c. Conductor temperature of 5⁰C in still air
An additional 200mm to vertical clearance shown measured under normal stringing temperature is to be added to allow for sag increase under maximum operating conditions.

Services Page 1- 69
Overhead Distribution Construction Standard Section 1

Services Clearances from Ground and Structures

Services Page 1- 70
Overhead Distribution Construction Standard Section 1

Clearances over Roofed Areas

Services Page 1- 71
Overhead Distribution Construction Standard Section 1

Clearances Between Mains and Service Poles

Services Page 1- 72
Overhead Distribution Construction Standard Section 1

Clearances in High Risk Environments

Services Page 1- 73
Overhead Distribution Construction Standard Section 1

1.8 Construction Practices

Services from Concrete Steel Poles
Provision of double insulation is required for services connected off concrete steel poles:
 Bare service conductors must be supported fixed to a timber crossarm or extension.
 Insulated or covered phase conductors must be installed with a loop to ensure adequate
clearance from the pole steelwork. Where this cannot be achieved the conductor must
have additional insulation installed.

Service Fusing
Service fuses shall be located at the customers Point of Attachment (PoA). The fuse is to be
installed no more than 150mm below the PoA.
The only exception to this in the situation where aerial consumer mains are installed and the aerial
conductors exceed 1 span. In these instances the service fuses are to be located at the take-off
pole.

Bonding of Service Neutral

Where customer’s aerial mains are installed on steel poles, a bond between the neutral and the
steel pole is to be installed at all poles except poles supporting private electrical equipment (eg
meter box).
For house-end service attachments where the house bracket is in contact or close proximity to
metal cladding, fascia or roofing material, additional insulation is to be installed. Refer D-OH1-0694-
SD-001 and D-OH1-0697-SD-001.

Telstra Crossings
All crossings of Telstra lines shall be in accordance with:
a) The code of practice for overhead power and telecommunications in-span crossings
b) The arrangements for the common use of poles between the ESAA and Telstra and
TasNetworks and Telstra.
Note: Where raisers are required on Telstra poles for service crossings prior permission must be
obtained.

Services Page 1- 74
Overhead Distribution Construction Standard Section 1

IPC Installations
The satellite insulation piercing connector enables one or two service cables to be connected
independently of the connection to the aerial bundled cable, that is, it allows for the removal and
subsequent reinstatement of the service cable(s).
The satellite insulation piercing connectors should only be used for temporary supply connections
and where multiple service connections are required on a pole, i.e. more than eight (8) service
connectors.
PROCEDURE FOR INSTALLATION
1. Insert the satellite connector into the mains connector such that the tail end of the satellite
is contained in the grease filled end cap. Ensure that the tail end is located centrally on
piercing teeth of the connector.
NOTE: The satellite connector MUST be used with mains connector S.I. 14.56.20.
2. Tighten the bolt of the connector until shear head releases. The mains and satellite
connectors shall NOT be removed once installed
3. One or two service cables may be connected to the satellite connector. The insulation must
NOT be stripped from the service conductors.
4. Use ratchet spanner D.I. 14.56.42 for tightening the bolt(s) on the satellite connector.
5. Service cable can be removed by untightening the appropriate bolt on the SATELLITE
connector.

LEGEND
1. Aerial bundled cable (LV ABC)
2. Insulation piercing connector (S.I. 14.56.20)
3. End cap filled with grease for sealing “satellite” insulation piercing connector.
4. Plastic shear head
5. Satellite insulation piercing connector (S.I. 14.56.37)
6. Service cable (Cable size 6-35mm²)

Services Page 1- 75
Overhead Distribution Construction Standard Section 1

Service Connections & Disconnections

CONNECTION OF SERVICES:
Direct tapping on to LV ABC is preferred. Where more than eight (8) service connectors are required
at a pole, either a junction box (Section 1.8.8) or satellite insulation piercing connectors should be
used. (Section 1.8.5).
Allowances should be made for load requirements of individual services and future service
connections, before deciding whether direct tapping, junction box or satellite insulation piercing
connectors should be used.

INSULATION NOTES
1. The insulation must not be stripped from the mains or service conductors
2. Only one service conductor per connector is allowed. (This includes the neutral connection). Refer
Section 1.8.5 for service connections to satellite insulation piercing connectors.
3. Ensure that service tee cable is fitted in correct side of insulation piercing connector.
4. Locate insulation piercing connectors a maximum of 300 from suspension clamp.
5. For double insulated conductors, remove 50mm of outer PVC sheath.
6. Once installed, the connectors are not to be removed or disturbed. If a service is to be
disconnected refer to Figure 2.
7. Use approved spanner for tightening the bolt. Adjustable spanners are not to be used as these
tend to damage the plastic shear head. Do not exert a bending force on the shear head, because
the shear head may break prematurely. Ensure spanner is in such a position that a sudden release
cannot cause any bodily harm. The connector should be held firmly when tightening the bolt.

PROCEDURE FOR INSTALLATION

1. Ensure that service fuses are removed.

2. Open up cable using the plastic core separators.
3. Open up connector sufficiently to allow it to be placed onto the neutral core of the mains cable.
Do not completely dismantle the connector. Ensure that the piercing teeth or the connector are
located centrally on the core and ensure that the protruding end of the bolt does not damage the
adjacent core(s).
4. Insert the service conductor into the connector such that the end of the conductor is contained
fully in the grease filled end cap. Ensure that the service conductor is located centrally on piercing
teeth of the connector.
5. Tighten the bolt of the connector until shear head releases. This ensures that the correct torque
has been applied and that proper contact is achieved.
6. Install drip loop adjacent insulation piercing connector.
7. Remove plastic core separator.
8. Repeat for phase connection(s). Connectors should be spaced at least 80mm apart (centre to
centre). With multiphase services, connect the red, white and blue phase cores of the service
cable to Cores 1, 2 and 3 of the LV ABC cable respectively.

Services Page 1- 76
Overhead Distribution Construction Standard Section 1

9. Carry out polarity testing and phase rotation testing at the Customer’s premises.

PROCEDURE FOR DISCONNECTION

The following procedure is to be followed when a service is to be disconnected:
1. Remove service fuse(s).
2. Cut service phase conductor(s) 100mm from connector.
3. Bend the remaining service conductor down and seal the end of the service conductor with 3M
tape. S.I. 15.83.88
4. The service neutral conductor is disconnected and sealed in the same manner. Do not tap
service to tail as disturbance to connector may lead to water entry and corrosion.

POLARITY TESTING
Similar procedures apply for service connections to bare overhead conductor system.
The only difference is in the identification of the distribution mains phase and neutral conductors at
the pole.
The phase conductors of an LV ABC cable are identified by longitudinal continuous raised ribs. Each
phase core is also marked with a phase number and the neutral core is identified by a series of
longitudinal continuous ribs.
Apart from the above difference, the same procedures apply as outlined in Handbook for Linesmen,
Chapter 11 Phasing Out).

Services Page 1- 77
Overhead Distribution Construction Standard Section 1

Service Phasing for Load Balancing

If the service connections to the aerial bundled cable are permanent, full regard must be paid to load
balancing on a three phase system at the time the service connections are made.
To balance the service connections on a circuit the following methods should be used.
Divide the pole number by 3 and use the remainder to establish the first core connection on that
pole.
If:
Remainder = 1, Connect to Core No.1
Remainder = 2, Connect to Core No.2
Remainder = 0, Connect to Core No.3

After connection of House “A” has been established connect the remaining houses in rotation, i.e.
House “B” to next core number after House “A”.

Example:

Pole No.
26 26 3 = 8 + 2 REMAINDER  Connect House “A” to Core 2
27 27 3 = 9 + 0 REMAINDER  Connect House “A” to Core 3
28 28 3 = 9 + 1 REMAINDER  Connect House “A” to Core 1
29 29 3 = 9 + 2 REMAINDER  Connect House “A” to Core 2

A A B A B A B

P29 P27 P28 P29

C C D

Services Page 1- 78
Overhead Distribution Construction Standard Section 2

2 SECTION 2 – LV CONSTRUCTIONS

2 SECTION 2 – LV CONSTRUCTIONS ........................................................................................................ 1

2.1 LV Open Wire Constructions ...................................................................................................... 2
2.1 General Notes for ABC Constructions ....................................................................................... 3
2.2 LV ABC Intermediate (Suspension) ............................................................................................ 4
2.3 LV ABC Double Suspension (Angle)............................................................................................ 6
2.4 LV ABC Dead End ........................................................................................................................ 8
2.5 LV ABC Strain............................................................................................................................. 10
2.6 LV ABC Right Angle Strain......................................................................................................... 12
2.7 LV ABC Tee Off .......................................................................................................................... 14
2.8 LV ABC Cross Over At Pole ....................................................................................................... 16
2.9 LV ABC Transition Strain (ABC to Open Wire) ......................................................................... 18
2.10 LV ABC Parallel Circuits Intermediate ...................................................................................... 20
2.11 LV ABC Parallel Circuits – Dead End Strain Arrangements ..................................................... 22
2.12 Intermediate LV Open Wire ..................................................................................................... 23
2.13 Intermediate Offset LV Open Wires Materials List ................................................................. 25
2.14 Double Pin Intermediate LV Open Wire (Obsolete) ............................................................... 27
2.15 Dead End LV Open Wire ........................................................................................................... 29
2.16 Strain LV Open Wire ................................................................................................................. 31
2.17 Dead End LV Open Wire ........................................................................................................... 33
2.18 Tee Off LV Open Wire ............................................................................................................... 35
2.19 Cross Over LV Open Wire ......................................................................................................... 37
2.20 LV Open Wire Service Crossarm for Transformer Pole........................................................... 39

LV Constructions Page 2-1

Overhead Distribution Construction Standard Section 2

2.1 LV Open Wire Constructions

LV Open Wire Construction Codes
The LV Open wire constructions detailed following are described by the following coding system.

LV Constructions Page 2-2

Overhead Distribution Construction Standard Section 2

2.1 General Notes for ABC Constructions

LV Constructions Page 2-3

Overhead Distribution Construction Standard Section 2

2.2 LV ABC Intermediate (Suspension)

LV Constructions Page 2-4

Overhead Distribution Construction Standard Section 2

LV AC Intermediate (Suspension) – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
I/LVABC.50/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
95B 145604 CLAMP,SUSPENSION HINGED 2C X 50MM2 S/S 1
I/LVABC.50/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
95C 145612 CLAMP,SUSPENSION HINGED 4C X 50MM2 S/S 1
I/LVABC.95/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
95D 145611 CLAMP,SUSPENSION HINGED 2C X 95MM2 S/S 1
I/LVABC.95/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
95A 145610 CLAMP,SUSPENSION HINGED 4C X 95MM2 S/S 1
I/LVABC.150/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
95J 145608 CABLE,SUSPENSION 4C X 150MM LVABC ALUM 1

LV Constructions Page 2-5

Overhead Distribution Construction Standard Section 2

2.3 LV ABC Double Suspension (Angle)

LV Constructions Page 2-6

Overhead Distribution Construction Standard Section 2

LV ABC Double Suspension (Angle) – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
D/LVABC.50/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
95B 145604 CLAMP,SUSPENSION HINGED 2C X 50MM2 S/S 2
98A 145618 BRACKET,SUSPENSION 25-50DEG. DOUBLE HOOK 1
D/LVABC.50/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
95C 145612 CLAMP,SUSPENSION HINGED 4C X 50MM2 S/S 2
98A 145618 BRACKET,SUSPENSION 25-50DEG. DOUBLE HOOK 1
D/LVABC.95/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
95D 145611 CLAMP,SUSPENSION HINGED 2C X 95MM2 S/S 2
98A 145618 BRACKET,SUSPENSION 25-50DEG. DOUBLE HOOK 1
D/LVABC.95/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
95A 145610 CLAMP,SUSPENSION HINGED 4C X 95MM2 S/S 2
98A 145618 BRACKET,SUSPENSION 25-50DEG. DOUBLE HOOK 1
D/LVABC.150/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
95J 145608 CABLE,SUSPENSION 4C X 150MM LVABC ALUM 2
98A 145618 BRACKET,SUSPENSION 25-50DEG. DOUBLE HOOK 1

LV Constructions Page 2-7

Overhead Distribution Construction Standard Section 2

2.4 LV ABC Dead End

LV Constructions Page 2-8

Overhead Distribution Construction Standard Section 2

LV ABC Dead End – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
DE/LVABC.50/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 1
98F 145646 WEAK LINK,LV ABC 10MM X 100MM ABCWL-8 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
DE/LVABC.50/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1

97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1

100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
DE/LVABC.95/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 1

100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2

DE/LVABC.95/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
DE/LVABC.150/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
97G 145607 CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC 1
100E 168019 END CAP,HEAT SHRINK 30-17MM CABLE RANGE 4

LV Constructions Page 2-9

Overhead Distribution Construction Standard Section 2

2.5 LV ABC Strain

LV Constructions Page 2-10

Overhead Distribution Construction Standard Section 2

LV ABC Strain – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
S/LVABC.50/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK 1
94C 145620 CONNECTOR,IPC LV ABC 2
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 2
98F 145646 WEAK LINK,LV ABC 10MM X 100MM ABCWL-8 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
S/LVABC.50/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK 1
94C 145620 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC.95/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK 1
94C 145620 CONNECTOR,IPC LV ABC 2
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
S/LVABC.95/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
102E TBA Nut Open Eye Hook M20 1
94C 145620 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC.150/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
102E TBA Nut Open Eye Hook M20 1
94J 145657 CONNECTOR,IPC LV ABC 4
97G 145607 CLAMP,TENSION 4 X 50MM2 ABC 2
100E 168019 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4

LV Constructions Page 2-11

Overhead Distribution Construction Standard Section 2

2.6 LV ABC Right Angle Strain

LV Constructions Page 2-12

Overhead Distribution Construction Standard Section 2

LV ABC Right Angle Strain – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
RS/LVABC.50/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 2
94C 145620 CONNECTOR,IPC LV ABC 2
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 2
98F 145646 WEAK LINK,LV ABC 10MM X 100MM ABCWL-8 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
RS/LVABC.50/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 2
94C 145620 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
RS/LVABC.95/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 2
94C 145620 CONNECTOR,IPC LV ABC 2
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
RS/LVABC.95/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 2
94C 145620 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 2
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
RS/LVABC.150/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 2
94J 145657 CONNECTOR,IPC LV ABC 4
97G 145607 CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC 2
100E 168019 END CAP,HEAT SHRINK 30-17MM CABLE RANGE 4

LV Constructions Page 2-13

Overhead Distribution Construction Standard Section 2

2.7 LV ABC Tee Off

LV Constructions Page 2-14

Overhead Distribution Construction Standard Section 2

LV ABC Tee Off Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
T/LVABC.50/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 1

98F 145646 WEAK LINK,LV ABC 10MM X 100MM ABCWL-8 1

94C 145620 CONNECTOR,IPC LV ABC 2

T/LVABC.50/3/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1

97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1

94C 145620 CONNECTOR,IPC LV ABC 4
T/LVABC.95/1/PLM S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1

97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 1

94C 145620 CONNECTOR,IPC LV ABC 2
T/LVABC.95/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1

97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1

94C 145620 CONNECTOR,IPC LV ABC 4
T/LVABC.150/3/PLM S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1

97G 145607 CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC 1

94J 145657 CONNECTOR,IPC LV ABC 4

LV Constructions Page 2-15

Overhead Distribution Construction Standard Section 2

2.8 LV ABC Cross Over At Pole

LV Constructions Page 2-16

Overhead Distribution Construction Standard Section 2

LV ABC Cross Over At Pole – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
X/LVABC.50/1 S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 4
95B 145604 CLAMP,SUSPENSION HINGED 2C X 50MM2 S/S 1
X/LVABC.50/3 S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 8
95C 145612 CLAMP,SUSPENSION HINGED 4C X 50MM2 S/S 1
X/LVABC.95/1 S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 4
95D 145611 CLAMP,SUSPENSION HINGED 2C X 95MM2 S/S 1
X/LVABC.95/3 S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 8
95A 145610 CLAMP,SUSPENSION HINGED 4C X 95MM2 S/S 1
X/LVABC.150/3 S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
94J 145657 CONNECTOR,IPC LV ABC 8
95J 145608 CABLE,SUSPENSION 4C X 150MM LVABC ALUM 1

LV Constructions Page 2-17

Overhead Distribution Construction Standard Section 2

2.9 LV ABC Transition Strain (ABC to Open Wire)

LV Constructions Page 2-18

Overhead Distribution Construction Standard Section 2

LV ABC Tee Off Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
S/LVABC.BARE.A/1/PLM S 59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 1
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94B 145630 CONNECTOR,IPC LV ABC 2
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
S/LVABC.BARE.A/3/PLM S 59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94B 145630 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC95.BARE.A/1/PLM S 59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94B 145630 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC95.BARE.A/3/PLM S 59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
94B 145630 CONNECTOR,IPC LV ABC 4
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC150.BARE.A/3/PLM S 59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
94B 145630 CONNECTOR,IPC LV ABC 4
97A 145607 CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC.BARE.C/1/PLM S 55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 1
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 3
94D 145619 CONNECTOR,IPC LV ABC 1
97B 145603 CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC 1
51D 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 2
S/LVABC.BARE.C/3/PLM S 55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 3
94D 145619 CONNECTOR,IPC LV ABC 1
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1
51D 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC95.BARE.C/1/PLM S 55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 3
94D 145619 CONNECTOR,IPC LV ABC 1
97A 145602 CLAMP,TENSION 4 X 50MM2 ABC 1
51D 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC95.BARE.C/3/PLM S 55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 3
94D 145619 CONNECTOR,IPC LV ABC 1
97G 145607 CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC 1
51D 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4
S/LVABC150.BARE.C/3/PLM S 55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
94C 145620 CONNECTOR,IPC LV ABC 3
94D 145619 CONNECTOR,IPC LV ABC 1
97G 145607 CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC 1
51D 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 1
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 1
100D 168017 END CAP,HEAT SHRINK 17-8MM CABLE RANGE 4

LV Constructions Page 2-19

Overhead Distribution Construction Standard Section 2

2.10 LV ABC Parallel Circuits Intermediate

LV Constructions Page 2-20

Overhead Distribution Construction Standard Section 2

LV ABC Parallel Circuits Intermediate Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
IP/LVABC.50/3 S 79B 325631 EYE-BOLT,OPEN M16 X 350MM FIXED WASHER 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK 1
95C 145612 CLAMP,SUSPENSION HINGED 4C X 50MM2 S/S 2
IP/LVABC.95/3 S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
102E TBA Nut Open Eye Hook M20 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK 1
95A 145610 CLAMP,SUSPENSION HINGED 4C X 95MM2 S/S 2
IP/LVABC.150/3 S 79D TBA EYE-BOLT,OPEN M20 X 350MM FIXED WASHER 1
102E TBA Nut Open Eye Hook M20 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
102D 325619 HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK 1
95J 145608 CABLE,SUSPENSION 4C X 150MM LVABC ALUM 2

LV Constructions Page 2-21

Overhead Distribution Construction Standard Section 2

2.11 LV ABC Parallel Circuits – Dead End Strain Arrangements

LV Constructions Page 2-22

Overhead Distribution Construction Standard Section 2

2.12 Intermediate LV Open Wire

LV Constructions Page 2-23

Overhead Distribution Construction Standard Section 2

Intermediate LV Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
I/LV/1/FRP/PLM S 74F 32224 Bolt Hex M12 X 130 2
75K 32285 Bolt Hex M16 X 280 1
75R 32291 Bolt Hex M16 X 425 1
86A 65157 Washer Els 12 2
86B 65158 Washer Els 16 2
60A 320756 Insulator Pin LV 2
59C 322723 Pin,Insulator LV 2
2A 323314 Crossarm Strap Mk14 1
1A 323215 Crossarm Fibre Reinforced Plastic 100x100x1830 long 1
I/LV/2/FRP/PLM S 74F 32224 Bolt Hex M12 X 130 2
75K 32285 Bolt Hex M16 X 280 1
75R 32291 Bolt Hex M16 X 425 1
86A 65157 Washer Els 12 2
86B 65158 Washer Els 16 2
60A 320756 Insulator Pin LV 3
59C 322723 Pin,Insulator LV 3
1A 323215 Crossarm Fibre Reinforced Plastic 100x100x1830 long 1
2A 323314 Crossarm Strap Mk14 2
I/LV/3/FRP/PLM S 74F 32224 Bolt Hex M12 X 130 2
75K 32285 Bolt Hex M16 X 280 1
75R 32291 Bolt Hex M16 X 425 1
86A 65157 Washer Els 12 2
86B 65158 Washer Els 16 2
60A 320756 Insulator Pin LV 4
59C 322723 Pin,Insulator LV 4
1A 323215 Crossarm Fibre Reinforced Plastic 100x100x1830 long 1
2A 323314 Crossarm Strap Mk14 2
I/LV-9/3/PLM S 74F 32224 Bolt Hex M12 X 130 2
75K 32285 Bolt Hex M16 X 280 1
75R 32291 Bolt Hex M16 X 425 1
86A 65157 Washer Els 12 2
86B 65158 Washer Els 16 2
60A 320756 Insulator Pin LV 4
59C 322723 Pin,Insulator LV 4
1C 323212 Crossarm Treated Wood Mk3 Dressed 100x100x2750 long 1
2A 323314 Crossarm Strap Mk14 2

LV Constructions Page 2-24

Overhead Distribution Construction Standard Section 2

2.13 Intermediate Offset LV Open Wires Materials List

LV Constructions Page 2-25

Overhead Distribution Construction Standard Section 2

Intermediate Offset LV Open Wire Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
Offset/LV/3/PLM S 1C 323212 CROSSARM,OFFSET LV 75X75X6X2560MM 1
1I 323415 Strut, LV Offset Crossarm 1
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 1
75T 32293 BOLT,HEX HEAD M16 X 475MM GAL. C/W NUT 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4

LV Constructions Page 2-26

Overhead Distribution Construction Standard Section 2

2.14 Double Pin Intermediate LV Open Wire (Obsolete)

LV Constructions Page 2-27

Overhead Distribution Construction Standard Section 2

Double Pin Intermediate LV Materials List (Obsolete)

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
D/LV/1/FRP/PLM S 1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4
D/LV/2/FRP/PLM S 1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 6
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 6
D/LV/3/FRP/PLM S 1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 8
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 8
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 8

LV Constructions Page 2-28

Overhead Distribution Construction Standard Section 2

2.15 Dead End LV Open Wire

LV Constructions Page 2-29

Overhead Distribution Construction Standard Section 2

Dead End LV – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
DE/LV/1/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 2
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 2
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 2
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 2
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75T 32293 BOLT,HEX HEAD M16 X 475MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 8
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
DE/LV/2/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 3
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 3
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 3
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75T 32293 BOLT,HEX HEAD M16 X 475MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 9
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
DE/LV/3/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 4
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 4
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 4
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75T 32293 BOLT,HEX HEAD M16 X 475MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 10
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
DE/LV-9/3/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 4
1C 323212 CROSSARM,WOOD 100 X 100 X 2750MM LONG 2
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 4
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 4
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75T 32293 BOLT,HEX HEAD M16 X 475MM GAL. C/W NUT 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 10
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

LV Constructions Page 2-30

Overhead Distribution Construction Standard Section 2

2.16 Strain LV Open Wire

LV Constructions Page 2-31

Overhead Distribution Construction Standard Section 2

Strain Open Wire Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
S/LV/1/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 4
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 2
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 4
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 4
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 10
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 2
S/LV/2/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 6
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 3
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 6
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 6
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 6
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 3
S/LV/3/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 8
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 8
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 8
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 8
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 14
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4
S/LV-9/3/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 8
1C 323212 CROSSARM,WOOD 100 X 100 X 2750MM LONG 2
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 8
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 8
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 4
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 8
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 14
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4

LV Constructions Page 2-32

Overhead Distribution Construction Standard Section 2

2.17 Dead End LV Open Wire

LV Constructions Page 2-33

Overhead Distribution Construction Standard Section 2

Dead End LV – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
RS/LV/1/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 4
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 2
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 2
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 4
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 4
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 2
RS/LV/2/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 6
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 4
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 6
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 6
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4
RS/LV/3/FRP/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 8
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 4
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 8
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 8
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4

LV Constructions Page 2-34

Overhead Distribution Construction Standard Section 2

2.18 Tee Off LV Open Wire

LV Constructions Page 2-35

Overhead Distribution Construction Standard Section 2

Tee Off L LV – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
T/LV/1/FRP S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 6
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 3
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 6
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 6
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 6
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 3
T/LV/2/FRP S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 9
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 5
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 9
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 9
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 9
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 5
T/LV/3/FRP S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 12
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 6
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 12
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 12
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 12
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 6

LV Constructions Page 2-36

Overhead Distribution Construction Standard Section 2

2.19 Cross Over LV Open Wire

LV Constructions Page 2-37

Overhead Distribution Construction Standard Section 2

Cross Over LV – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
X/LV/1/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 8
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 4
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 8
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 8
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 8
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 20
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 4
X/LV/2/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 12
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 6
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 12
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 12
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 12
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 24
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 6
X/LV/3/PLM S 17A 323331 BRACKET,INSULATOR 50X3X630MM F-STRAP 16
1A 323215 CROSSARM,FIBREGLASS, 100X100X1830MM LONG 4
59C 322723 PIN,INSULATOR 16MM DIA X LV GAL STEEL 8
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 16
74E 32223 BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT 16
74G 32225 BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT 8
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 16
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 6
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 28
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
60A 320756 INSULATOR,PIN 660V LVLP PORCELAIN 8

LV Constructions Page 2-38

Overhead Distribution Construction Standard Section 2

2.20 LV Open Wire Service Crossarm for Transformer Pole

LV Constructions Page 2-39

Overhead Distribution Construction Standard Section 2

LV Open Wire Service Crossarm – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
DE/LV-PTS S 1A 323210 CROSSARM,WOOD 100 X 100 X 1830MM LONG 1
60C 321117 INSULATOR,STRAIN 80MM SHLV2 PORCELAIN 4
74E 32223 BOLT,Hex Head M12 x 120mm Gal. c/w Nut 4
74G 32225 BOLT,Hex Head M12 x 140mm Gal. c/w Nut 6
75D 32276 BOLT,Hex Head M16 x 150mm Gal. c/w Nut 4
17F 323378 BRACKET,Crossarm 50 x 50 x 390mm Gal 2
17A 323331 BRACKET,Insulator 50x3x630mm F-Strap 8

LV Constructions Page 2-40

Overhead Distribution Construction Standard Section 3

3 SECTION 3 – 11/22kV & SWER CONSTRUCTIONS

3 SECTION 3 – 11/22kV & SWER CONSTRUCTIONS ................................................................................ 1

3.1 Intermediate Open Wire 11/22kV MK4 Crossarm .................................................................... 3
3.2 Intermediate Delta Open Wire MK4 Crossarm ......................................................................... 5
3.3 Intermediate Offset HV Crossarm ............................................................................................. 7
3.4 Intermediate 11/22kV with Special Bracket.............................................................................. 9
3.5 HV Poletop Raiser for Intermediate Open Wire ..................................................................... 11
3.6 Dead End Open Wire MK5 Crossarm....................................................................................... 13
3.7 Strain MK5 Crossarm ................................................................................................................ 15
3.8 Strain Underslung MK5 Crossarm ............................................................................................ 17
3.9 Strain Delta MK5 Crossarm ...................................................................................................... 19
3.10 Right Angle Strain Open Wire MK5 Crossarm ......................................................................... 21
3.11 Tee Off Open Wire MK5 Crossarm .......................................................................................... 23
3.12 Transposition 1, Strain, Rolling, MK5 Crossarm ...................................................................... 25
3.13 Transposition 2, Strain, Inner & Outer, MK5 Crossarm .......................................................... 27
3.14 Transposition 3, Strain, Two Outers, MK5 Crossarm .............................................................. 29
3.15 Transpositions Intermediate 4, 5 & 6, Configuration Overview............................................. 31
3.16 Transposition 4 Intermediate, Rolling MK4 Crossarm ............................................................ 32
3.17 Transposition 5, Intermediate, Inner & Outers, MK4 Crossarm ............................................ 34
3.18 Transposition 6, Intermediate, Two Outers, MK4 Crossarm .................................................. 36
3.19 Intermediate Vertical Double Circuit – MK4 Crossarm .......................................................... 38
3.20 Strain Vertical Double Circuit, Open Wire, MK5 Crossarm .................................................... 40
3.21 Strain Underslung Vertical Double Circuit 11/22kV MK5 Crossarm ...................................... 42
3.22 Right Angle Strain Double Circuit Vertical MK5 Crossarm ...................................................... 44
3.23 Intermediate / Strain Horizontal Double Circuit Vertical MK4/5 Crossarm .......................... 46
3.24 Strain Horizontal Double Circuit, Open Wire MK5 Crossarm ................................................. 48
3.25 Intermediate SWER (Single Pin) ............................................................................................... 50
3.26 Intermediate SWER (Flying Angle) ........................................................................................... 51
3.27 Dead End SWER ........................................................................................................................ 52
3.28 Strain SWER............................................................................................................................... 53
OBSOLETE CONSTRUCTIONS – FOR REFERENCE ONLY ................................................................... 54

11/22 kV & SWER Constructions Page 3-1

Overhead Distribution Construction Standard Section 3

3.29 Intermediate Double Pin Open Wire MK4 Crossarm (Obsolete) ........................................... 54
3.30 Intermediate Trident Open Wire (Obsolete)........................................................................... 56
3.31 Dead End, Open Wire, MK7 Crossarm (Obsolete) .................................................................. 58
3.32 Strain, Open Wire, MK7 Crossarm (Obsolete) ........................................................................ 60
3.33 Strain Underslung, Open Wire, MK7 Crossarm (Obsolete) .................................................... 62
3.34 Right Angle Strain, Open Wire, MK7 Crossarm ....................................................................... 64
3.35 Tee Off Open Wire, MK7 Crossarm (Obsolete) ....................................................................... 66
3.36 Intermediate Double Pin, Horizontal Double Circuit, Open Wire MK4 Crossarm
(Obsolete)................................................................................................................................. 68
3.37 Intermediate Double Pin, Horizontal Open Wire, MK4 Crossarm (Obsolete) ....................... 70
3.38 NMS HVAB Intermediate, Single Suspension (Obsolete) ....................................................... 72
3.39 NMS HVAB Angle, Double Suspension (Obsolete) .................................................................. 74
3.40 NMS HVAB Angle, High Lift, Double Suspension (Obsolete) .................................................. 76
3.41 NMS HVAB Angle, High Lift, Single Hook Suspension (Obsolete) .......................................... 77
3.42 NMS HVAB Angle, High Lift, Double Hook Suspension (Obsolete) ........................................ 78
3.43 NMS HVAB Angle, High Lift, Double Suspension (Obsolete) .................................................. 79
3.44 NMS HVAB Strain, Unjointed (Obsolete) ................................................................................. 80
3.45 NMS HVAB Strain, Jointed (Obsolete) ..................................................................................... 81
3.46 NMS HVAB Right Angle Strain, Unjointed ............................................................................... 83
3.47 NMS HVAB Right Angle Strain Jointed ..................................................................................... 85
3.48 NMS HVAB Open Wire Strain Transition ................................................................................. 87
3.49 NMS HVAB Dead End (Obsolete) ............................................................................................. 89
3.50 NMS HVAB Dead End – Underground Cable Transition (Obsolete) ....................................... 91
3.51 NMS HVAB Strain with Tee-Off (Obsolete).............................................................................. 93
3.52 NMS HVAB Strain, Transformer Tee Off with SDs & EDOs (Obsolete)................................... 94
3.53 NMS HVAB Strain, Transformer Tee Off with EDOs (Obsolete) ............................................. 96
3.54 NMS HVAB Strain, Transformer Tee-Off (Obsolete) ............................................................... 97
3.55 NMS HVAB, Strain Vertical Tee-Off to Open Wire (Obsolete)................................................ 98
3.56 NMS HVAB Strain, Tee-Off to Open Wire (Obsolete) ............................................................. 99
3.57 NMS HVAB Open Wire Right Angle Strain Transition (Obsolete) ......................................... 100

11/22 kV & SWER Constructions Page 3-2

Overhead Distribution Construction Standard Section 3

3.1 Intermediate Open Wire 11/22kV MK4 Crossarm

11/22 kV & SWER Constructions Page 3-3

Overhead Distribution Construction Standard Section 3

Intermediate 11/22kV MK4 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
I/11/1/PLM and S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1

I/22/1/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1

59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 2

60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 2

75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2

77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 2

82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
I/11/3/PLM and S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
I/22/3/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2

Insulator raisers 6D 323399 SPACER,INSULATOR PIN 150X100X5X100MM RHS 1

for steel/conc poles 87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 1
(per phase conductor) 76G TBA M20 x 45 Bolt and Nut 1

11/22 kV & SWER Constructions Page 3-4

Overhead Distribution Construction Standard Section 3

3.2 Intermediate Delta Open Wire MK4 Crossarm

11/22 kV & SWER Constructions Page 3-5

Overhead Distribution Construction Standard Section 3

Intermediate 11/22kV MK4 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
IH/22/3/PLM S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
CROSSARM,STEEL 75 X 75 X 2210MM MK4
1D 323304 GAL 2
PIN,INSULATOR 20MM DIA X 22KV GAL
59A 322721 STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
BOLT,HEX HEAD M16 X 325MM GAL. C/W
75M 32287 NUT 2
BOLT,HEX HEAD M16 X 350MM GAL. C/W
75N 32288 NUT 2
BOLT,HEX HEAD M12 X 35MM GAL. C/W
77B 33771 NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
BRACE,CROSSARM 40 X 700 X 5MM THICK
2A 323314 GAL 4

11/22 kV & SWER Constructions Page 3-6

Overhead Distribution Construction Standard Section 3

3.3 Intermediate Offset HV Crossarm

11/22 kV & SWER Constructions Page 3-7

Overhead Distribution Construction Standard Section 3

Intermediate Offset Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
PIN,INSULATOR 20MM DIA X 22KV
Offset/22/3/PLM S 59A 322721 GAL STEEL 3
INSULATOR,PIN 22KV AERO
60E 320531 PORCELAIN 3
BOLT,HEX HEAD M16 X 325MM GAL.
75M 32287 C/W NUT 2
BOLT,HEX HEAD M12 X 35MM GAL.
77B 33771 C/W NUT 1
NUT,HEX M16 THREAD GALANISED
82A 40441 STEEL 2
WASHER,FLAT ROUND M16 X 50MM
86B 65158 GAL 2
WASHER,FLAT ROUND M12 X 24MM
88A 66412 GAL 1
CROSSARM,OFFSET HV 75X75X6 2-
1H 323410 PIECE KIT 1

11/22 kV & SWER Constructions Page 3-8

Overhead Distribution Construction Standard Section 3

3.4 Intermediate 11/22kV with Special Bracket

11/22 kV & SWER Constructions Page 3-9

Overhead Distribution Construction Standard Section 3

Special Bracket for adding Centre Phase Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
IB/11/3/PLM and S 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1

IB/22/3/PLM 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1

6D 323399 SPACER,INSULATOR PIN 150X100X5X100MM RHS 1

75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1

88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 1

11/22 kV & SWER Constructions Page 3-10

Overhead Distribution Construction Standard Section 3

3.5 HV Poletop Raiser for Intermediate Open Wire

11/22 kV & SWER Constructions Page 3-11

Overhead Distribution Construction Standard Section 3

HV Poletop Raiser Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
RAISER/2/PLM S 4B 323235 BRACE,RAISER BEAM 40 X 5 X 500MM GAL 1

4C 323236 BEAM,RAISER 125 X 65 X 2060MM TYPE-2 2

75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2

77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 7

82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4

88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 7

11/22 kV & SWER Constructions Page 3-12

Overhead Distribution Construction Standard Section 3

3.6 Dead End Open Wire MK5 Crossarm

11/22 kV & SWER Constructions Page 3-13

Overhead Distribution Construction Standard Section 3

Dead End Wire MK5 Crossarm – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DE5/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
DE5/22/1/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 2
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
DE5/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
DE5/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 3
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 3
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 3
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 1
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-14

Overhead Distribution Construction Standard Section 3

3.7 Strain MK5 Crossarm

11/22 kV & SWER Constructions Page 3-15

Overhead Distribution Construction Standard Section 3

Strain 11 / 22 kV MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
S5/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
S5/22/1/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 4
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 4
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 4
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 4
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
S5/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
S5/22/3/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-16

Overhead Distribution Construction Standard Section 3

3.8 Strain Underslung MK5 Crossarm

11/22 kV & SWER Constructions Page 3-17

Overhead Distribution Construction Standard Section 3

Strain Underslung MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SU5/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
SU5/22/1/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 4
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 4
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 4
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
SU5/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
SU5/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
86B 85158 #N/A 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1

11/22 kV & SWER Constructions Page 3-18

Overhead Distribution Construction Standard Section 3

3.9 Strain Delta MK5 Crossarm

11/22 kV & SWER Constructions Page 3-19

Overhead Distribution Construction Standard Section 3

Strain Underslung MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SH5/22/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 4
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 4
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 24
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 12
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 12
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 8
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 8
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1

11/22 kV & SWER Constructions Page 3-20

Overhead Distribution Construction Standard Section 3

3.10 Right Angle Strain Open Wire MK5 Crossarm

11/22 kV & SWER Constructions Page 3-21

Overhead Distribution Construction Standard Section 3

Right Angle Strain Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
RS5/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 4
RS5/22/1/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 4
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 2
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 4
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 4
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 4
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 4
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 8
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 8
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
RS5/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 4
RS5/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 4
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 2
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 8
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 8
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8

11/22 kV & SWER Constructions Page 3-22

Overhead Distribution Construction Standard Section 3

3.11 Tee Off Open Wire MK5 Crossarm

11/22 kV & SWER Constructions Page 3-23

Overhead Distribution Construction Standard Section 3

Tee Off 11 / 22 kV MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
T5/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
T5/22/1/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 2
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
T5/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
T5/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 3
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 3
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 3
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-24

Overhead Distribution Construction Standard Section 3

3.12 Transposition 1, Strain, Rolling, MK5 Crossarm

11/22 kV & SWER Constructions Page 3-25

Overhead Distribution Construction Standard Section 3

Transposition 1, Strain, Rolling Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
TR1/11/3PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
TR1/22/3/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 4
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6

61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6

61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-26

Overhead Distribution Construction Standard Section 3

3.13 Transposition 2, Strain, Inner & Outer, MK5 Crossarm

11/22 kV & SWER Constructions Page 3-27

Overhead Distribution Construction Standard Section 3

Transposition 2, Strain, Inner & Outer Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
TR2/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
TR2/22/3/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 4
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1

11/22 kV & SWER Constructions Page 3-28

Overhead Distribution Construction Standard Section 3

3.14 Transposition 3, Strain, Two Outers, MK5 Crossarm

11/22 kV & SWER Constructions Page 3-29

Overhead Distribution Construction Standard Section 3

Transposition 3, Strain, Two Outers Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
TR3/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
TR3/22/3/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 4
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 12
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 6
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 6
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1

11/22 kV & SWER Constructions Page 3-30

Overhead Distribution Construction Standard Section 3

3.15 Transpositions Intermediate 4, 5 & 6, Configuration Overview

11/22 kV & SWER Constructions Page 3-31

Overhead Distribution Construction Standard Section 3

3.16 Transposition 4 Intermediate, Rolling MK4 Crossarm

11/22 kV & SWER Constructions Page 3-32

Overhead Distribution Construction Standard Section 3

Transposition 4, Intermediate Rolling Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
TR4/11/3/PLM and S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
TR4/22/3/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-33

Overhead Distribution Construction Standard Section 3

3.17 Transposition 5, Intermediate, Inner & Outers, MK4 Crossarm

11/22 kV & SWER Constructions Page 3-34

Overhead Distribution Construction Standard Section 3

Transposition 5, Intermediate Rolling, Inner & Outers Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
TR5/11/3/PLM and S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
TR5/22/3/PLM 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-35

Overhead Distribution Construction Standard Section 3

3.18 Transposition 6, Intermediate, Two Outers, MK4 Crossarm

11/22 kV & SWER Constructions Page 3-36

Overhead Distribution Construction Standard Section 3

Transposition 6, Intermediate, Two Outers Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
TR6/11/3PLM and S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
TR6/22/3/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 6
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-37

Overhead Distribution Construction Manual

3.19 Intermediate Vertical Double Circuit – MK4 Crossarm

Ver. 0.1 11/22 kV & SWER Constructions Page 3-38

Overhead Distribution Construction Standard Section 3

Intermediate Vertical Circuit MK04– Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
IV/11/3PLM and S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 3
IV/22/3/PLM 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 6
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 6
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 12
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6

11/22 kV & SWER Constructions Page 3-39

Overhead Distribution Construction Standard Section 3

3.20 Strain Vertical Double Circuit, Open Wire, MK5 Crossarm

11/22 kV & SWER Constructions Page 3-40

Overhead Distribution Construction Standard Section 3

Strain Vertical Double Circuit, Open Wire, MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SV/11/3PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 6
SV/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 6
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 24
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 12
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 12
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 6
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 24
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 24
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 12
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 24
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 24
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 12

11/22 kV & SWER Constructions Page 3-41

Overhead Distribution Construction Standard Section 3

3.21 Strain Underslung Vertical Double Circuit 11/22kV MK5 Crossarm

11/22 kV & SWER Constructions Page 3-42

Overhead Distribution Construction Standard Section 3

Strain Underslung Vertical, Open Wire, MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SUV/11/3PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 6
SUV/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 6
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 24
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 12
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 12
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 6
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 12
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 12
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 12
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 12

11/22 kV & SWER Constructions Page 3-43

Overhead Distribution Construction Standard Section 3

3.22 Right Angle Strain Double Circuit Vertical MK5 Crossarm

11/22 kV & SWER Constructions Page 3-44

Overhead Distribution Construction Standard Section 3

Right Angle Strain Double Circuit Vertical 11/22kV MK5 Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
RSV/11/3PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 12
RSV/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 12
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 24
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 12
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 12
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 12
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 24
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 24
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 12
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 24
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 24
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 24

11/22 kV & SWER Constructions Page 3-45

Overhead Distribution Construction Standard Section 3

3.23 Intermediate / Strain Horizontal Double Circuit Vertical MK4/5

Crossarm

11/22 kV & SWER Constructions Page 3-46

Overhead Distribution Construction Standard Section 3

Intermediate / Strain Horizontal Double Circuit Vertical MK4/5 Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DCI/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
DCI/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 12
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 6
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 6
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 5
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 7

11/22 kV & SWER Constructions Page 3-47

Overhead Distribution Construction Standard Section 3

3.24 Strain Horizontal Double Circuit, Open Wire MK5 Crossarm

11/22 kV & SWER Constructions Page 3-48

Overhead Distribution Construction Standard Section 3

Strain Horizontal Double Circuit Open Wire MK5 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DS5/22/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 4
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 4
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 24
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 12
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 12
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 8
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 8
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1

11/22 kV & SWER Constructions Page 3-49

Overhead Distribution Construction Standard Section 3

3.25 Intermediate SWER (Single Pin)

11/22 kV & SWER Constructions Page 3-50

Overhead Distribution Construction Standard Section 3

3.26 Intermediate SWER (Flying Angle)

11/22 kV & SWER Constructions Page 3-51

Overhead Distribution Construction Standard Section 3

3.27 Dead End SWER

11/22 kV & SWER Constructions Page 3-52

Overhead Distribution Construction Standard Section 3

3.28 Strain SWER

11/22 kV & SWER Constructions Page 3-53

Overhead Distribution Construction Standard Section 3

OBSOLETE CONSTRUCTIONS – FOR REFERENCE ONLY

3.29 Intermediate Double Pin Open Wire MK4 Crossarm (Obsolete)

11/22 kV & SWER Constructions Page 3-54

Overhead Distribution Construction Standard Section 3

Intermediate Double Pin Open Wire MK4 Crossarm Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
D/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
D/22/1/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 4
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 4
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
D/11/3/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 3
D/22/3/PLM 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 6
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 6
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 6
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-55

Overhead Distribution Construction Standard Section 3

3.30 Intermediate Trident Open Wire (Obsolete)

11/22 kV & SWER Constructions Page 3-56

Overhead Distribution Construction Standard Section 3

Intermediate Trident Open Wire (Obsolete) Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
IT/11/1 S 76B 032346 Bolt Hex M20 X 350 2
IT/11/1 S 75L 032286 Bolt Hex M16 X 300 2
IT/11/1 S 6D 323399 Insulator Raiser Bracket 2
IT/11/1 S 4 323311 L' 1
IT/11/1 S 60E 320531 Insulator,Pin 3
IT/11/1 S 59A 322721 Pin,Insulator 3
IT/11/1 S 87E 065617 Washer N.S. 20 2
IT/11/1 S 86B 065158 Washer ELS 16 2
IT/11/1 S 82B 040442 Nut M20 4
IT/11/1 S 82A 040441 Nut M16 4

IT/11/3 S 76B 032346 Bolt Hex M20 X 350 2

IT/11/3 S 75L 032286 Bolt Hex M16 X 300 2
IT/11/3 S 6D 323399 Insulator Raiser Bracket 2
IT/11/3 S 4 323311 L' 1
IT/11/3 S 60E 320531 Insulator,Pin 3
IT/11/3 S 59A 322721 Pin,Insulator 3
IT/11/3 S 87E 65617 Washer N.S. 20 2
IT/11/3 S 86B 065158 Washer ELS 16 2
IT/11/3 S 82B 040442 Nut M20 4
IT/11/3 S 82A 040441 Nut M16 4

IT/22/1 S 76B 032346 Bolt Hex M20 X 350 2

IT/22/1 S 75L 32286 Bolt Hex M16 X 300 2
IT/22/1 S 6D 323399 Insulator Raiser Bracket 2
IT/22/1 S 4 323311 L' 1
IT/22/1 S 60E 320531 Insulator,Pin 3
IT/22/1 S 59A 322721 Pin,Insulator 3
IT/22/1 S 87E 065617 Washer N.S. 20 2
IT/22/1 S 86B 065158 Washer ELS 16 2
IT/22/1 S 82B 40442 Nut M20 4
IT/22/1 S 82A 040441 Nut M16 4

IT/22/3 S 76B 032346 Bolt Hex M20 X 350 2

IT/22/3 S 75L 32286 Bolt Hex M16 X 300 2
IT/22/3 S 6D 323399 Insulator Raiser Bracket 2
IT/22/3 S 4 323311 L' 1
IT/22/3 S 60E 320531 Insulator,Pin 3
IT/22/3 S 59A 322721 Pin,Insulator 3
IT/22/3 S 87E 65617 Washer N.S. 20 2
IT/22/3 S 86B 65158 Washer ELS 16 2
IT/22/3 S 82B 40442 Nut M20 4
IT/22/3 S 82A 040441 Nut M16 4

11/22 kV & SWER Constructions Page 3-57

Overhead Distribution Construction Standard Section 3

3.31 Dead End, Open Wire, MK7 Crossarm (Obsolete)

11/22 kV & SWER Constructions Page 3-58

Overhead Distribution Construction Standard Section 3

Dead End, Open Wire, MK7 Crossarm Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
DE7/11/1 S 75M 032287 Bolt Hex M16 X 325 2
DE7/11/1 S 77A 033770 Bolt Tow er M12 X 30 4
DE7/11/1 S 78B 033781 Bolt Tow er M16 X 40 4
DE7/11/1 S 88A 066412 Washer Tow er 12 4
DE7/11/1 S 88B 066413 Washer Tow er 16 4
DE7/11/1 S 60G 321260 Insulator,Disc 2
DE7/11/1 S 61A 322056 Ball Clevis & Pin 2
DE7/11/1 S 61D 322090 Kink Pin 2
DE7/11/1 S 61B 322386 Socket Termination 2
DE7/11/1 S 1F 323307 Crossarm Mk7 2
DE7/11/1 S 2A 323314 Crossarm Strap Mk14 4
DE7/11/1 S 5B 323394 Crossarm Spacer 2

DE7/11/3 S 75M 032287 Bolt Hex M16 X 325 2

DE7/11/3 S 77A 033770 Bolt Tow er M12 X 30 4
DE7/11/3 S 78B 033781 Bolt Tow er M16 X 40 4
DE7/11/3 S 88A 066412 Washer Tow er 12 4
DE7/11/3 S 88B 066413 Washer Tow er 16 4
DE7/11/3 S 60G 321260 Insulator,Disc 3
DE7/11/3 S 61A 322056 Ball Clevis & Pin 3
DE7/11/3 S 61D 322090 Kink Pin 2
DE7/11/3 S 61B 322386 Socket Termination 3
DE7/11/3 S 1F 323307 Crossarm Mk7 2
DE7/11/3 S 2A 323314 Crossarm Strap Mk14 4
DE7/11/3 S 5B 323394 Crossarm Spacer 2

DE7/22/1 S 75M 032287 Bolt Hex M16 X 325 2

DE7/22/1 S 77A 033770 Bolt Tow er M12 X 30 4
DE7/22/1 S 78B 033781 Bolt Tow er M16 X 40 4
DE7/22/1 S 88A 066412 Washer Tow er 12 4
DE7/22/1 S 88B 066413 Washer Tow er 16 4
DE7/22/1 S 60G 321260 Insulator,Disc 4
DE7/22/1 S 61A 322056 Ball Clevis & Pin 2
DE7/22/1 S 61D 322090 Kink Pin 2
DE7/22/1 S 61B 322386 Socket Termination 2
DE7/22/1 S 1F 323307 Crossarm Mk7 2
DE7/22/1 S 2A 323314 Crossarm Strap Mk14 4
DE7/22/1 S 5B 323394 Crossarm Spacer 2

DE7/22/3 S 75M 032287 Bolt Hex M16 X 325 2

DE7/22/3 S 77A 033770 Bolt Tow er M12 X 30 4
DE7/22/3 S 78B 033781 Bolt Tow er M16 X 40 4
DE7/22/3 S 88A 066412 Washer Tow er 12 4
DE7/22/3 S 88B 066413 Washer Tow er 16 4
DE7/22/3 S 60G 321260 Insulator,Disc 6
DE7/22/3 S 61A 322056 Ball Clevis & Pin 3
DE7/22/3 S 61D 322090 Kink Pin 3
DE7/22/3 S 61B 322386 Socket Termination 3
DE7/22/3 S 1F 323307 Crossarm Mk7 2
DE7/22/3 S 2A 323314 Crossarm Strap Mk14 4
DE7/22/3 S 5B 323394 Crossarm Spacer 2

11/22 kV & SWER Constructions Page 3-59

Overhead Distribution Construction Standard Section 3

3.32 Strain, Open Wire, MK7 Crossarm (Obsolete)

11/22 kV & SWER Constructions Page 3-60

Overhead Distribution Construction Standard Section 3

Strain Open Wire MK7 Crossarm Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
S7/11/1 S 75M 032287 Bolt Hex M16 X 325 2
S7/11/1 S 77A 033770 Bolt Tow er M12 X 30 4
S7/11/1 S 78A 033780 Bolt Tow er M16 X 35 6
S7/11/1 S 86B 065158 Washer Els 16 2
S7/11/1 S 88A 066412 Washer Tow er 12 4
S7/11/1 S 88B 066413 Washer Tow er 16 6
S7/11/1 S 90B 066771 Washer Spring Spiral 16 1
S7/11/1 S 60E 320531 Insulator,Pin 22/450 2
S7/11/1 S 60G 321260 Insulator,Disc 4
S7/11/1 S 61A 322056 Ball Clevis & Pin 4
S7/11/1 S 61D 322090 Kink Pin 4
S7/11/1 S 61B 322386 Socket Termination 4
S7/11/1 S 59A 322721 Pin,Insulator 22kv 2
S7/11/1 S 1F 323307 Crossarm Mk7 2
S7/11/1 S 4 323311 L' Bracket Mk11 1
S7/11/1 S 2A 323314 Crossarm Strap Mk14 4
S7/11/1 S 5B 323394 Crossarm Spacer 2

S7/11/3 S 75M 032287 Bolt Hex M16 X 325 2

S7/11/3 S 77A 033770 Bolt Tow er M12 X 30 4
S7/11/3 S 78A 033780 Bolt Tow er M16 X 35 6
S7/11/3 S 86B 065158 Washer Els 16 2
S7/11/3 S 88A 066412 Washer Tow er 12 4
S7/11/3 S 88B 066413 Washer Tow er 16 6
S7/11/3 S 90B 066771 Washer Spring Spiral 16 1
S7/11/3 S 60E 320531 Insulator,Pin 22/450 3
S7/11/3 S 60G 321260 Insulator,Disc 6
S7/11/3 S 61A 322056 Ball Clevis & Pin 6
S7/11/3 S 61D 322090 Kink Pin 6
S7/11/3 S 61B 322386 Socket Termination 6
S7/11/3 S 59A 322721 Pin,Insulator 22kv 3
S7/11/3 S 1F 323307 Crossarm Mk7 2
S7/11/3 S 4 323311 L' Bracket Mk11 1
S7/11/3 S 2A 323314 Crossarm Strap Mk14 4
S7/11/1 S 5B 323394 Crossarm Spacer 2

S7/22/1 S 75M 032287 Bolt Hex M16 X 325 2

S7/22/1 S 77A 033770 Bolt Tow er M12 X 30 4
S7/22/1 S 78A 033780 Bolt Tow er M16 X 35 6
S7/22/1 S 88A 066412 Washer Tow er 12 4
S7/22/1 S 88B 066413 Washer Tow er 16 6
S7/22/1 S 90B 066771 Washer Spring Spiral 16 1
S7/22/1 S 60E 320531 Insulator,Pin 22/450 2
S7/22/1 S 60G 321260 Insulator,Disc 8
S7/22/1 S 61A 322056 Ball Clevis & Pin 4
S7/22/1 S 61D 322090 Kink Pin 6
S7/22/1 S 61B 322386 Socket Termination 4
S7/22/1 S 59A 322721 Pin,Insulator 22kv 2
S7/22/1 S 1F 323307 Crossarm Mk7 2
S7/22/1 S 4 323311 L' Bracket Mk11 1
S7/22/1 S 2A 323314 Crossarm Strap Mk14 4
S7/11/1 S 5B 323394 Crossarm Spacer 2

S7/22/3 S 75M 032287 Bolt Hex M16 X 325 2

S7/22/3 S 77A 033770 Bolt Tow er M12 X 30 4

S7/22/3 S 75M 032287 Bolt Hex M16 X 325 2

S7/22/3 S 77A 033770 Bolt Tow er M12 X 30 4
S7/22/3 S 78A 033780 Bolt Tow er M16 X 35 6
S7/22/3 S 86B 065158 Washer Els 16 2
S7/22/3 S 88A 066412 Washer Tow er 12 4
S7/22/3 S 88B 066413 Washer Tow er 16 6
S7/22/3 S 60E 320531 Insulator,Pin 22/450 3
S7/22/3 S 60G 321260 Insulator,Disc 12
S7/22/3 S 61A 322056 Ball Clevis & Pin 6
S7/22/3 S 61D 322090 Kink Pin 9
S7/22/3 S 61B 322386 Socket Termination 6
S7/22/3 S 59A 322721 Pin,Insulator 22kv 3
S7/22/3 S 1F 323307 Crossarm Mk7 2
S7/22/3 S 4 323311 L' Bracket Mk11 1
S7/22/3 S 2A 323314 Crossarm Strap Mk14 4
S7/11/1 S 5B 323394 Crossarm Spacer 2

11/22 kV & SWER Constructions Page 3-61

Overhead Distribution Construction Standard Section 3

3.33 Strain Underslung, Open Wire, MK7 Crossarm (Obsolete)

11/22 kV & SWER Constructions Page 3-62

Overhead Distribution Construction Standard Section 3

Strain Underslung Open Wire, MK7 Crossarm Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
SU7/11/1 S 75M 032287 Bolt Hex M16 X 325 2
SU7/11/1 S 77A 033770 Bolt Tow er M12 X 30 4
SU7/11/1 S 78A 033780 Bolt Tow er M16 X 35 6
SU7/11/1 S 86B 065158 Washer Els 16 2
SU7/11/1 S 88A 066412 Washer Tow er 12 4
SU7/11/1 S 88B 066413 Washer Tow er 16 6
SU7/11/1 S 90B 066771 Washer Spring Spiral 16 1
SU7/11/1 S 60G 321260 Insulator,Disc 4
SU7/11/1 S 61A 322056 Ball Clevis & Pin 4
SU7/11/1 S 61D 322090 Kink Pin 4
SU7/11/1 S 61B 322386 Socket Termination 4
SU7/11/1 S 1F 323307 Crossarm Mk7 2
SU7/11/1 S 4 323311 L' Bracket Mk11 1
SU7/11/1 S 2A 323314 Crossarm Strap Mk14 4

SU7/11/3 S 75M 032287 Bolt Hex M16 X 325 2

SU7/11/3 S 77A 033770 Bolt Tow er M12 X 30 4
SU7/11/3 S 78A 033780 Bolt Tow er M16 X 35 6
SU7/11/3 S 86B 065158 Washer Els 16 2
SU7/11/3 S 88A 066412 Washer Tow er 12 4
SU7/11/3 S 88B 066413 Washer Tow er 16 6
SU7/11/3 S 90B 066771 Washer Spring Spiral 16 1
SU7/11/3 S 60E 320531 Insulator,Pin 22/450 1
SU7/11/3 S 60G 321260 Insulator,Disc 6
SU7/11/3 S 61A 322056 Ball Clevis & Pin 6
SU7/11/3 S 61D 322090 Kink Pin 6
SU7/11/3 S 61B 322386 Socket Termination 6
SU7/11/3 S 59A 322721 Pin,Insulator 22kv 1
SU7/11/3 S 1F 323307 Crossarm Mk7 2
SU7/11/3 S 4 323311 L' Bracket Mk11 1
SU7/11/3 S 2A 323314 Crossarm Strap Mk14 4

SU7/22/1 S 75M 032287 Bolt Hex M16 X 325 2

SU7/22/1 S 77A 033770 Bolt Tow er M12 X 30 4
SU7/22/1 S 78A 033780 Bolt Tow er M16 X 35 6
SU7/22/1 S 88A 066412 Washer Tow er 12 4
SU7/22/1 S 88B 066413 Washer Tow er 16 6
SU7/22/1 S 90B 066771 Washer Spring Spiral 16 1
SU7/22/1 S 60G 321260 Insulator,Disc 8
SU7/22/1 S 61A 322056 Ball Clevis & Pin 4
SU7/22/1 S 61D 322090 Kink Pin 6
SU7/22/1 S 61B 322386 Socket Termination 4
SU7/22/1 S 1F 323307 Crossarm Mk7 2
SU7/22/1 S 4 323311 L' Bracket Mk11 1
SU7/22/1 S 2A 323314 Crossarm Strap Mk14 4

SU7/22/3 S 75M 032287 Bolt Hex M16 X 325 2

SU7/22/3 S 77A 033770 Bolt Tow er M12 X 30 4
SU7/22/3 S 78A 033780 Bolt Tow er M16 X 35 6
SU7/22/3 S 86B 065158 Washer Els 16 2
SU7/22/3 S 88A 066412 Washer Tow er 12 4
SU7/22/3 S 88B 066413 Washer Tow er 16 6
SU7/22/3 S 60E 320531 Insulator,Pin 22/450 1
SU7/22/3 S 60G 321260 Insulator,Disc 12
SU7/22/3 S 61A 322056 Ball Clevis & Pin 6
SU7/22/3 S 61D 322090 Kink Pin 9
SU7/22/3 S 61B 322386 Socket Termination 6
SU7/22/3 S 59A 322721 Pin,Insulator 22kv 1
SU7/22/3 S 1F 323307 Crossarm Mk7 2
SU7/22/3 S 4 323311 L' Bracket Mk11 1
SU7/22/3 S 2A 323314 Crossarm Strap Mk14 4
SU7/22/3 S 5B 323394 Crossarm Spacer 2

11/22 kV & SWER Constructions Page 3-63

Overhead Distribution Construction Standard Section 3

3.34 Right Angle Strain, Open Wire, MK7 Crossarm

11/22 kV & SWER Constructions Page 3-64

Overhead Distribution Construction Standard Section 3

Right Angle Strain, Open Wire, MK7 Crossarm Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
RS7/11/1 S 75M 032287 Bolt Hex M16 X 325 4
RS7/11/1 S 77A 033770 Bolt Tow er M12 X 30 8
RS7/11/1 S 78B 033781 Bolt Tow er M16 X 40 8
RS7/11/1 S 86B 065158 Washer Els 16 4
RS7/11/1 S 88A 066412 Washer Tow er 12 8
RS7/11/1 S 88B 066413 Washer Tow er 16 8
RS7/11/1 S 60E 320531 Insulator,Pin 22/450 2
RS7/11/1 S 60G 321260 Insulator,Disc 4
RS7/11/1 S 61A 322056 Ball Clevis & Pin 4
RS7/11/1 S 61D 322090 Kink Pin 4
RS7/11/1 S 61B 322386 Socket Termination 4
RS7/11/1 S 59A 322721 Pin,Insulator 22kv 2
RS7/11/1 S 1F 323307 Crossarm Mk7 4
RS7/11/1 S 2A 323314 Crossarm Strap Mk14 8
RS7/11/1 S 5B 323394 Crossarm Spacer 2

RS7/11/3 S 75M 032287 Bolt Hex M16 X 325 4

RS7/11/3 S 77A 033770 Bolt Tow er M12 X 30 8
RS7/11/3 S 78B 033781 Bolt Tow er M16 X 40 8
RS7/11/3 S 86B 065158 Washer Els 16 4
RS7/11/3 S 88A 066412 Washer Tow er 12 8
RS7/11/3 S 88B 066413 Washer Tow er 16 8
RS7/11/3 S 60E 320531 Insulator,Pin 22/450 2
RS7/11/3 S 60G 321260 Insulator,Disc 6
RS7/11/3 S 61A 322056 Ball Clevis & Pin 6
RS7/11/3 S 61D 322090 Kink Pin 6
RS7/11/3 S 61B 322386 Socket Termination 6
RS7/11/3 S 59A 322721 Pin,Insulator 22kv 2
RS7/11/3 S 1F 323307 Crossarm Mk7 4
RS7/11/3 S 2A 323314 Crossarm Strap Mk14 8
RS7/11/3 S 5B 323394 Crossarm Spacer 2

RS7/22/1 S 75M 032287 Bolt Hex M16 X 325 4

RS7/22/1 S 77A 033770 Bolt Tow er M12 X 30 8
RS7/22/1 S 78B 033781 Bolt Tow er M16 X 40 8
RS7/22/1 S 86B 065158 Washer Els 16 4
RS7/22/1 S 88A 066412 Washer Tow er 12 8
RS7/22/1 S 88B 066413 Washer Tow er 16 8
RS7/22/1 S 60E 320531 Insulator,Pin 22/450 2
RS7/22/1 S 60G 321260 Insulator,Disc 8
RS7/22/1 S 61A 322056 Ball Clevis & Pin 4
RS7/22/1 S 61D 322090 Kink Pin 4
RS7/22/1 S 61B 322386 Socket Termination 4
RS7/22/1 S 59A 322721 Pin,Insulator 22kv 2
RS7/22/1 S 1F 323307 Crossarm Mk7 4
RS7/22/1 S 2A 323314 Crossarm Strap Mk14 8
RS7/22/1 S 5B 323394 Crossarm Spacer 2

RS7/22/3 S 75M 032287 Bolt Hex M16 X 325 4

RS7/22/3 S 77A 033770 Bolt Tow er M12 X 30 8
RS7/22/3 S 78B 033781 Bolt Tow er M16 X 40 8
RS7/22/3 S 86B 065158 Washer Els 16 4
RS7/22/3 S 88A 066412 Washer Tow er 12 8
RS7/22/3 S 88B 066413 Washer Tow er 16 8
RS7/22/3 S 60E 320531 Insulator,Pin 22/450 2
RS7/22/3 S 60G 321260 Insulator,Disc 12
RS7/22/3 S 61A 322056 Ball Clevis & Pin 6
RS7/22/3 S 61D 322090 Kink Pin 6
RS7/22/3 S 61B 322386 Socket Termination 6
RS7/22/3 S 59A 322721 Pin,Insulator 22kv 2
RS7/22/3 S 1F 323307 Crossarm Mk7 4
RS7/22/3 S 2A 323314 Crossarm Strap Mk14 8
RS7/22/3 S 5B 323394 Crossarm Spacer 2

11/22 kV & SWER Constructions Page 3-65

Overhead Distribution Construction Standard Section 3

3.35 Tee Off Open Wire, MK7 Crossarm (Obsolete)

11/22 kV & SWER Constructions Page 3-66

Overhead Distribution Construction Standard Section 3

Tee Off Open Wire, MK7 Crossarm Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
T7/11/1 S 75M 032287 Bolt Hex M16 X 325 2
T7/11/1 S 77A 033770 Bolt Tow er M12 X 30 4
T7/11/1 S 78B 033781 Bolt Tow er M16 X 40 4
T7/11/1 S 86B 065158 Washer Els 16 2
T7/11/1 S 88A 066412 Washer Tow er 12 4
T7/11/1 S 88B 066413 Washer Tow er 16 4
T7/11/1 S 60E 320531 Insulator,Pin 22/450 1
T7/11/1 S 60G 321260 Insulator,Disc 2
T7/11/1 S 61A 322056 Ball Clevis & Pin 2
T7/11/1 S 61D 322090 Kink Pin 4
T7/11/1 S 61B 322386 Socket Termination 2
T7/11/1 S 59A 322721 Pin,Insulator 22kV 1
T7/11/1 S 1F 323307 Crossarm Mk7 2
T7/11/1 S 2A 323314 Crossarm Strap Mk14 4
T7/11/1 S 5B 323394 Crossarm Spacer 2

T7/11/3 S 75M 032287 Bolt Hex M16 X 325 2

T7/11/3 S 77A 033770 Bolt Tow er M12 X 30 4
T7/11/3 S 78B 033781 Bolt Tow er M16 X 40 4
T7/11/3 S 86B 065158 Washer Els 16 2
T7/11/3 S 88A 066412 Washer Tow er 12 4
T7/11/3 S 88B 066413 Washer Tow er 16 4
T7/11/3 S 60E 320531 Insulator,Pin 22/450 1
T7/11/3 S 60G 321260 Insulator,Disc 3
T7/11/3 S 61A 322056 Ball Clevis & Pin 3
T7/11/3 S 61D 322090 Kink Pin 6
T7/11/3 S 61B 322386 Socket Termination 3
T7/11/3 S 59A 322721 Pin,Insulator 22kV 1
T7/11/3 S 1F 323307 Crossarm Mk7 2
T7/11/3 S 2A 323314 Crossarm Strap Mk14 4
T7/11/3 S 5B 323394 Crossarm Spacer 2

T7/22/1 S 75M 032287 Bolt Hex M16 X 325 2

T7/22/1 S 77A 033770 Bolt Tow er M12 X 30 4
T7/22/1 S 78B 033781 Bolt Tow er M16 X 40 4
T7/22/1 S 86B 065158 Washer Els 16 2
T7/22/1 S 88A 066412 Washer Tow er 12 4
T7/22/1 S 88B 066413 Washer Tow er 16 4
T7/22/1 S 60E 320531 Insulator,Pin 22/450 1
T7/22/1 S 60G 321260 Insulator,Disc 4
T7/22/1 S 61A 322056 Ball Clevis & Pin 2
T7/22/1 S 61D 322090 Kink Pin 12
T7/22/1 S 61B 322386 Socket Termination 2
T7/22/1 S 59A 322721 Pin,Insulator 22kV 1
T7/22/1 S 1F 323307 Crossarm Mk7 2
T7/22/1 S 2A 323314 Crossarm Strap Mk14 4
T7/22/1 S 5B 323394 Crossarm Spacer 2

T7/22/3 S 75M 032287 Bolt Hex M16 X 325 2

T7/22/3 S 77A 033770 Bolt Tow er M12 X 30 4
T7/22/3 S 78B 033781 Bolt Tow er M16 X 40 4
T7/22/3 S 86B 065158 Washer Els 16 2
T7/22/3 S 88A 066412 Washer Tow er 12 4
T7/22/3 S 88B 066413 Washer Tow er 16 4
T7/22/3 S 60E 320531 Insulator,Pin 22/450 1
T7/22/3 S 60G 321260 Insulator,Disc 6
T7/22/3 S 61A 322056 Ball Clevis & Pin 3
T7/22/3 S 61D 322090 Kink Pin 18
T7/22/3 S 61B 322386 Socket Termination 3
T7/22/3 S 59A 322721 Pin,Insulator 22kV 1
T7/22/3 S 1F 323307 Crossarm Mk7 2
T7/22/3 S 2A 323314 Crossarm Strap Mk14 4
T7/22/3 S 5B 323394 Crossarm Spacer 2

11/22 kV & SWER Constructions Page 3-67

Overhead Distribution Construction Standard Section 3

3.36 Intermediate Double Pin, Horizontal Double Circuit, Open Wire

MK4 Crossarm (Obsolete)

11/22 kV & SWER Constructions Page 3-68

Overhead Distribution Construction Standard Section 3

Intermediate Double Pin, Horizontal Double Circuit, Open Wire Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DV/11/1/PLM and S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 6
DV/22/1/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 6
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 12
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 6
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 12
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 12
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 12
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 12
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 12

11/22 kV & SWER Constructions Page 3-69

Overhead Distribution Construction Standard Section 3

3.37 Intermediate Double Pin, Horizontal Open Wire, MK4 Crossarm

(Obsolete)

11/22 kV & SWER Constructions Page 3-70

Overhead Distribution Construction Standard Section 3

Double Pin Horizontal, Open Wire, MK4 Crossarm Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
DCD/11/3 S 75L 032286 Bolt Hex M16 X 300 4
DCD/11/3 S 77A 033770 Bolt Tow er M12 X 30 8
DCD/11/3 S 78B 033781 Bolt Tow er M16 X 40 12
DCD/11/3 S 82A 040441 Nut M16 4
DCD/11/3 S 88A 066412 Washer Tow er 12 8
DCD/11/3 S 88B 066413 Washer Tow er 16 12
DCD/11/3 S 60E 320531 Insulator,Pin 22/450 12
DCD/11/3 S 59A 322721 Pin,Insulator 22kv 12
DCD/11/3 S 1D 323304 Crossarm Mk4 4
DCD/11/3 S 3 323310 Strain Plate Mk10 6
DCD/11/3 S 2A 323314 Crossarm Strap Mk14 8
DCD/11/3 S 4 323311 L' Bracket Mk11 2

DCD/22/3 S 75L 032286 Bolt Hex M16 X 300 4

DCD/22/3 S 77A 033770 Bolt Tow er M12 X 30 8
DCD/22/3 S 78B 033781 Bolt Tow er M16 X 40 12
DCD/22/3 S 82A 040441 Nut M16 6
DCD/22/3 S 88A 066412 Washer Tow er 12 12
DCD/22/3 S 88B 066413 Washer Tow er 16 12
DCD/22/3 S 60E 320531 Insulator,Pin 22/450 12
DCD/22/3 S 59A 322721 Pin,Insulator 22kv 12
DCD/22/3 S 1D 323304 Crossarm Mk4 4
DCD/22/3 S 3 323310 Strain Plate Mk10 6
DCD/22/3 S 2A 323314 Crossarm Strap Mk14 8
DCD/22/3 S 4 323311 L' Bracket Mk11 2

11/22 kV & SWER Constructions Page 3-71

Overhead Distribution Construction Standard Section 3

3.38 NMS HVAB Intermediate, Single Suspension (Obsolete)

11/22 kV & SWER Constructions Page 3-72

Overhead Distribution Construction Standard Section 3

NMS HVABC Intermediate, Single Suspension Materials List Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
I/HVABC11.50/3/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95F 149113 CLAMP,SUSPENSION 35MM2 HVABC ALUMIN 1
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
I/HVABC11.185/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95G 149114 CLAMP,SUSPENSION 185MM2 HVABC ALUMIN 1
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
I/HVABC22.35/3/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95F 149113 CLAMP,SUSPENSION 35MM2 HVABC ALUMIN 1
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
I/HVABC22.185/3/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95G 149114 CLAMP,SUSPENSION 185MM2 HVABC ALUMIN 1
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2

11/22 kV & SWER Constructions Page 3-73

Overhead Distribution Construction Standard Section 3

3.39 NMS HVAB Angle, Double Suspension (Obsolete)

11/22 kV & SWER Constructions Page 3-74

Overhead Distribution Construction Standard Section 3

NMS HVAB Angle, Double Suspension (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
D/HVABC11.185/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95G 149114 CLAMP,SUSPENSION 185MM2 HVABC ALUMIN 2
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
D/HVABC22.35/3/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95F 149113 CLAMP,SUSPENSION 35MM2 HVABC ALUMIN 2
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
D/HVABC22.185/3/PLM S 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
95G 149114 CLAMP,SUSPENSION 185MM2 HVABC ALUMIN 2
98D 149119 BRACKET,POLE HV ABC SB10312+HB16200 GAL 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2

11/22 kV & SWER Constructions Page 3-75

Overhead Distribution Construction Standard Section 3

3.40 NMS HVAB Angle, High Lift, Double Suspension (Obsolete)

11/22 kV & SWER Constructions Page 3-76

Overhead Distribution Construction Standard Section 3

3.41 NMS HVAB Angle, High Lift, Single Hook Suspension (Obsolete)

11/22 kV & SWER Constructions Page 3-77

Overhead Distribution Construction Standard Section 3

3.42 NMS HVAB Angle, High Lift, Double Hook Suspension (Obsolete)

11/22 kV & SWER Constructions Page 3-78

Overhead Distribution Construction Standard Section 3

3.43 NMS HVAB Angle, High Lift, Double Suspension (Obsolete)

11/22 kV & SWER Constructions Page 3-79

Overhead Distribution Construction Standard Section 3

3.44 NMS HVAB Strain, Unjointed (Obsolete)

11/22 kV & SWER Constructions Page 3-80

Overhead Distribution Construction Standard Section 3

3.45 NMS HVAB Strain, Jointed (Obsolete)

11/22 kV & SWER Constructions Page 3-81

Overhead Distribution Construction Standard Section 3

NMS HVAB Strain, Jointed (Obsolete) Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SJ/HVABC22.185/3 S 102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1

120C 149115 TERMINATION KIT,22KV 35-185MM2 OUTDOOR 1

53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 2

53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 2

55D 144950 CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM 1

61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2

61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2

61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2

80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1

86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1

11/22 kV & SWER Constructions Page 3-82

Overhead Distribution Construction Standard Section 3

3.46 NMS HVAB Right Angle Strain, Unjointed

11/22 kV & SWER Constructions Page 3-83

Overhead Distribution Construction Standard Section 3

NMS HVAB Right Angle Strain, Unjointed Materials List (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
RS/HVABC11.185/PLM S 53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 2
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 2
55D 144950 CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2

RS/HVABC22.185/3/PLM S 53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 2

53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 2
55D 144950 CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
RS/HVABC22.35/3/PLM S 53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 2
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 2
55D 144950 CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2

11/22 kV & SWER Constructions Page 3-84

Overhead Distribution Construction Standard Section 3

3.47 NMS HVAB Right Angle Strain Jointed

11/22 kV & SWER Constructions Page 3-85

Overhead Distribution Construction Standard Section 3

NMS HVAB Right Angle Strain, Jointed Materials List (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
RSJ/HVABC22.185/PLM S 120C 149115 TERMINATION KIT,22KV 35-185MM2 OUTDOOR 3
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 2
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 2
55D 144950 CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
RSJ/HVABC22.35/PLM S 120C 149115 TERMINATION KIT,22KV 35-185MM2 OUTDOOR 3
53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 2
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 2
55D 144950 CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2

11/22 kV & SWER Constructions Page 3-86

Overhead Distribution Construction Standard Section 3

3.48 NMS HVAB Open Wire Strain Transition

11/22 kV & SWER Constructions Page 3-87

Overhead Distribution Construction Standard Section 3

NMS HVAB Open Wire Strain Transition Materials List (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVABC22.35/3/PLM S 89 66803 Washer 75 x 75 x 6 (M20 Hole) 2
119G 225773 Lightning Arrester (NOT L/L TESTED) ABB 22kV 10kA c/w bird cap & M12 studs 3
2
120A 149116 Termination kit 35mm 22kV HVABC 2
1D 323304 Crossarm Mk4 2
29K 323401 Service Fuse Bracket 3 ph Michaud 1
2B 323317 Crossarm Strap Mk17 1
2
35B 145653 Lug Preinsuled LVABC 95mm 4
2
35F 152476 Lug Crimp Bimetal 35mm M12 6
35P 141299 Lug Bolted 16mm 2 12 hole 9
36C 141304 Q LUG bolted 50 70mm 2 tinned copper 6
41B 157877 Sleeving 6 ID 2 Wall 6
53AA 149111 Cond Term Hel 6/4.75 7/1.60 or 7/5.00 catenary for 35/50 HVABC 2
53AC 149122 Bundled restraint 35mm 2 22kV HVABC 2
59A 322721 Pin,Insulator 22kV 1
60E 320531 Insulator Pin 22/450 1
60H 320735 Insulator Raychem standoff 24kV set of 3 1
62F 144620 Bushing Cover 22kV 3
63M 236323 Switch Fuse EDO 24KV single phase 3
64F 236247 LVABC Switch Fuse Box - 160A 1ph (6-95 Cu or Al) 3
6A 323315 Insulator Bracket Mk15 1
75D 32276 Bolt Hex M16 X 150 3
75N 32288 Bolt Hex M16 X 350 2
75P 32289 Bolt Hex M16 X 375 2
75Z 32261 Bolt Hex M16 X 45 3
76C 32340 Bolt Hex M20 X 400 2
82B 40442 Nut M20 4
85B 50250 Coach Screw M12 X 100 2
86B 65158 Washer Els 16 4
88B 66413 Washer Tower 16 3
2
51E 103217 Wire Electrical Cu 16mm 1c Black (U/V Resistant) 2
2A 323314 Crossarm Strap Mk14 4
15F 323449 T/F Mounting Brackets - 63 to 315kVA Bolt Fixed Transformers 1
SSB/HVABC22.185/PLM S 89 66803 Washer 75 x 75 x 6 (M20 Hole) 2
119G 225773 Lightning Arrester (NOT L/L TESTED) ABB 22kV 10kA c/w bird cap & M12 studs 3
2
120B 149117 Termination kit 185mm 22kV HVABC 2
1D 323304 Crossarm Mk4 2
29K 323401 Service Fuse Bracket 3 ph Michaud 1
2B 323317 Crossarm Strap Mk17 1
35B 145653 Lug Preinsuled LVABC 95mm 2 4
2
35P 141299 Lug Bolted 16mm 12 hole 9
2
36C 141304 Q LUG bolted 50 70mm tinned copper 6
41B 157877 Sleeving 6 ID 2 Wall 6
53AB 149112 Cond Term Hel 19/3.65 catenary for 150/185 HVABC 2
2
53AD 149121 Bundled restraint 185mm 22kV HVABC 2
59A 322721 Pin,Insulator 22kV 1
60E 320531 Insulator Pin 22/450 1
60H 320735 Insulator Raychem standoff 24kV set of 3 1
62F 144620 Bushing Cover 22kV 3
63M 236323 Switch Fuse EDO 24KV single phase 3
64F 236247 LVABC Switch Fuse Box - 160A 1ph (6-95 Cu or Al) 3
6A 323315 Insulator Bracket Mk15 1
75D 32276 Bolt Hex M16 X 150 3
75N 32288 Bolt Hex M16 X 350 2
75P 32289 Bolt Hex M16 X 375 2
75Z 32261 Bolt Hex M16 X 45 3
76C 32340 Bolt Hex M20 X 400 2
82B 40442 Nut M20 4
85B 50250 Coach Screw M12 X 100 2
86B 65158 Washer Els 16 4
88B 66413 Washer Tower 16 3
#REF! 152482 Lug Crimp Bimetal 185mm 2 M12 6
51E 103217 Wire Electrical Cu 16mm2 1c Black (U/V Resistant) 2
2A 323314 Crossarm Strap Mk14 4
15F 323449 T/F Mounting Brackets - 63 to 315kVA Bolt Fixed Transformers 1

11/22 kV & SWER Constructions Page 3-88

Overhead Distribution Construction Standard Section 3

3.49 NMS HVAB Dead End (Obsolete)

11/22 kV & SWER Constructions Page 3-89

Overhead Distribution Construction Standard Section 3

NMS HVAB Dead End Materials List (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DE/HVABC11.185/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 3
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
120B 149117 TERMINATION KIT,22KV 70-240MM2 OUTDOOR 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 1
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
#REF! 152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
DE/HVABC22.35/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 3
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120A 149116 TERMINATION KIT,22KV 35MM2 OUTDOOR 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
35F 152476 LUG,CRIMP 35MM2 X M10 HOLE BI-METAL 3
53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 1
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
DE/HVABC22.185/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 3
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120B 149117 TERMINATION KIT,22KV 70-240MM2 OUTDOOR 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 1
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-90

Overhead Distribution Construction Standard Section 3

3.50 NMS HVAB Dead End – Underground Cable Transition (Obsolete)

11/22 kV & SWER Constructions Page 3-91

Overhead Distribution Construction Standard Section 3

NMS HVAB Dead End – Underground Transition (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DEC/HVABC11.185/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
120B 149117 TERMINATION KIT,22KV 70-240MM2 OUTDOOR 1
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 1
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 3
DE/HVABC22.35UG/3 S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120A 149116 TERMINATION KIT,22KV 35MM2 OUTDOOR 1
35F 152476 LUG,CRIMP 35MM2 X M10 HOLE BI-METAL 3
53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 1
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
#N/A 303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
DE/HVABC22.35/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 3
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120A 149116 TERMINATION KIT,22KV 35MM2 OUTDOOR 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
35F 152476 LUG,CRIMP 35MM2 X M10 HOLE BI-METAL 3
53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 1
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

11/22 kV & SWER Constructions Page 3-92

Overhead Distribution Construction Standard Section 3

3.51 NMS HVAB Strain with Tee-Off (Obsolete)

11/22 kV & SWER Constructions Page 3-93

Overhead Distribution Construction Standard Section 3

3.52 NMS HVAB Strain, Transformer Tee Off with SDs & EDOs (Obsolete)

11/22 kV & SWER Constructions Page 3-94

Overhead Distribution Construction Standard Section 3

NMS HVAB Strain, Transformer Tee-Off, SDs and EDOs (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVABC22.35/3/PLM S 89 66803 WASHER,FLAT SQUARE M20 X75MM GAL.STEEL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120A 149116 TERMINATION KIT,22KV 35MM2 OUTDOOR 2
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 4
35F 152476 LUG,CRIMP 35MM2 X M10 HOLE BI-METAL 6
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 9
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 6
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 6
53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 2
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 3
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64F 236247 SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
15F 323449 BRACKET,MOUNTING 100-300KVA TRANSFORMERS 1
SSB/HVABC22.185/PLM S 89 66803 WASHER,FLAT SQUARE M20 X75MM GAL.STEEL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120B 149117 TERMINATION KIT,22KV 70-240MM2 OUTDOOR 2
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 4
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 9
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 6
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 6
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 2
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 3
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64F 236247 SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75D 32276 BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
#REF! 152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 6
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
15F 323449 BRACKET,MOUNTING 100-300KVA TRANSFORMERS 1

11/22 kV & SWER Constructions Page 3-95

Overhead Distribution Construction Standard Section 3

3.53 NMS HVAB Strain, Transformer Tee Off with EDOs (Obsolete)

11/22 kV & SWER Constructions Page 3-96

Overhead Distribution Construction Standard Section 3

3.54 NMS HVAB Strain, Transformer Tee-Off (Obsolete)

11/22 kV & SWER Constructions Page 3-97

Overhead Distribution Construction Standard Section 3

3.55 NMS HVAB, Strain Vertical Tee-Off to Open Wire (Obsolete)

11/22 kV & SWER Constructions Page 3-98

Overhead Distribution Construction Standard Section 3

3.56 NMS HVAB Strain, Tee-Off to Open Wire (Obsolete)

11/22 kV & SWER Constructions Page 3-99

Overhead Distribution Construction Standard Section 3

3.57 NMS HVAB Open Wire Right Angle Strain Transition (Obsolete)

11/22 kV & SWER Constructions Page 3-100

Overhead Distribution Construction Standard Section 3

NMS HVAB Open Wire Right Angle Strain Transition (Obsolete)

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
S/HVABC11.35.B/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
120A 149116 TERMINATION KIT,22KV 35MM2 OUTDOOR 1
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 3
35F 152476 LUG,CRIMP 35MM2 X M10 HOLE BI-METAL 3
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 1
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 1
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
S/HVABC11.185.B/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
120B 149117 TERMINATION KIT,22KV 70-240MM2 OUTDOOR 1
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 3
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 1
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 1
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 6
S/HVABC22.35.B/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120A 149116 TERMINATION KIT,22KV 35MM2 OUTDOOR 1
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 3
35F 152476 LUG,CRIMP 35MM2 X M10 HOLE BI-METAL 3
53AA 149111 DEADEND,FULL TENSION 7/5.00 + CAT ALUM 1
53AC 149122 RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 1
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
S/HVABC22.185.B/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
120B 149117 TERMINATION KIT,22KV 70-240MM2 OUTDOOR 1
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 3
53AB 149112 DEADEND,FULL TENSION 19/3.65 +CAT ALUM 1
53AD 149121 RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 1
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 6

11/22 kV & SWER Constructions Page 3-101

Overhead Distribution Construction Standard Section 3

11/22 kV & SWER Constructions Page 3-102

Overhead Distribution Construction Standard Section 4

4 SECTION 4 – 33kV CONSTRUCTIONS

4 SECTION 4 – 33kV CONSTRUCTIONS .................................................................................................... 1

4.1 Intermediate Flat, MK5 Crossarm .............................................................................................. 2
4.2 Intermediate Delta, MK5 Crossarm ........................................................................................... 4
4.3 Dead End - Flat – MK5 Crossarm ............................................................................................... 6
4.4 Dead End – Delta – MK5 Crossarm ............................................................................................ 8
4.5 Strain – Flat - MK5 Crossarm – Details .................................................................................... 10
4.6 Strain Flat– Underslung Bridging - MK5 Crossarm.................................................................. 12
4.7 Delta Strain – MK5 Crossarm ................................................................................................... 14
4.8 Right Angled Strain – MK5 Crossarm ....................................................................................... 16
4.9 Delta Right Angled Stain – MK5 Crossarm .............................................................................. 18

33kV Constructions Page 4-1

Overhead Distribution Construction Standard Section 4

4.1 Intermediate Flat, MK5 Crossarm

33kV Constructions Page 4-2

Overhead Distribution Construction Standard Section 4

Intermediate Flat – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
I/36/3/PLM S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 2
60M 320551 INSULATOR,LINE POST S/C 36KV PORCELAIN 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2

33kV Constructions Page 4-3

Overhead Distribution Construction Standard Section 4

4.2 Intermediate Delta, MK5 Crossarm

33kV Constructions Page 4-4

Overhead Distribution Construction Standard Section 4

Intermediate Delta – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
Delta I/36/3/PLM S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 2
60M 320551 INSULATOR,LINE POST S/C 36KV PORCELAIN 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2

33kV Constructions Page 4-5

Overhead Distribution Construction Standard Section 4

4.3 Dead End - Flat – MK5 Crossarm

33kV Constructions Page 4-6

Overhead Distribution Construction Standard Section 4

Dead End - Flat MK5 Crossarm – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DE5/36/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 9
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 3
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 3
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

33kV Constructions Page 4-7

Overhead Distribution Construction Standard Section 4

4.4 Dead End – Delta – MK5 Crossarm

33kV Constructions Page 4-8

Overhead Distribution Construction Standard Section 4

Dead End – Delta - MK5 Crossarm – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
Delta DE5/36/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 9
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 3
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 3
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
80C 37260 EYE BOLT,FORGED M20 X 325MM GAL C/W NUT 1
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 1
102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

33kV Constructions Page 4-9

Overhead Distribution Construction Standard Section 4

4.5 Strain – Flat - MK5 Crossarm – Details

33kV Constructions Page 4-10

Overhead Distribution Construction Standard Section 4

Strain – Flat - MK5 Crossarm – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
S5/36/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 3
4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 18
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 9
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4

60M 320551 INSULATOR,LINE POST S/C 36KV PORCELAIN 3

2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

33kV Constructions Page 4-11

Overhead Distribution Construction Standard Section 4

4.6 Strain Flat– Underslung Bridging - MK5 Crossarm

33kV Constructions Page 4-12

Overhead Distribution Construction Standard Section 4

Strain Flat– Underslung Bridging – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SU5/36/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 18
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 9
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
6A 323315 Insulator Bracket 33kV (Not Stocked - Place Order) 1
60M 320551 INSULATOR,LINE POST S/C 36KV PORCELAIN 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

33kV Constructions Page 4-13

Overhead Distribution Construction Standard Section 4

4.7 Delta Strain – MK5 Crossarm

33kV Constructions Page 4-14

Overhead Distribution Construction Standard Section 4

Delta Strain – MK5 Crossarm – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DeltaS5/36/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
102A 325842 EYE-NUT,M20 THREAD GAL STEEL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 18
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 9
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
80D 37261 EYE BOLT,FORGED M20 X 350MM GAL C/W NUT 1
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
6A 323315 Insulator Bracket 33kV (Not Stocked - Place Order) 1
60M 320551 INSULATOR,LINE POST S/C 36KV PORCELAIN 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

33kV Constructions Page 4-15

Overhead Distribution Construction Standard Section 4

4.8 Right Angled Strain – MK5 Crossarm

33kV Constructions Page 4-16

Overhead Distribution Construction Standard Section 4

Right Angled Strain – MK5 Crossarm - Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
RS5/36/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 4
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 18
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6

61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6

61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 8
60M 320551 INSULATOR,LINE POST S/C 36KV PORCELAIN 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 8

33kV Constructions Page 4-17

Overhead Distribution Construction Standard Section 4

4.9 Delta Right Angled Stain – MK5 Crossarm

33kV Constructions Page 4-18

Overhead Distribution Construction Standard Section 4

Delta Right Angled Strain – MK5 Crossarm – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
DeltaRS5/36/3/PLM S 3 323310 Strain Plate Mk10 4
1E 323305 Crossarm Mk5 4
60G 321260 Insulator Disc Porcelain 16mm 70kN 146mm 18
61A 322056 Ball Clevis & Pin 16mm 6
61B 322386 Socket Termination 16mm 6
61D 322090 Kink Pin 16mm 6
75N 32288 Bolt Hex M16 X 350 4
75Z 32261 Bolt Hex M16 X 45 8
77B 33771 Bolt Tower M12 X 35 8
80D 37261 Bolt Eye M20 X 350 2
82A 40441 Nut M16 4
82B 40442 Nut M20 2
86B 65158 Washer Els 16 4
88A 66412 Washer Tower 12 8
88B 66413 Washer Tower 16 8
#N/A 320551 Insulator Pin 36kV Porcelain Insulator with Pin 2
2A 323314 Crossarm Strap Mk14 8

33kV Constructions Page 4-19

Overhead Distribution Construction Standard Section 4

33kV Constructions Page 4-20

Overhead Distribution Construction Standard Section 5

5 SECTION 5 – SWITCHES, FUSES, RECLOSERS &

SECTIONALISERS

5 SECTION 5 – SWITCHES, FUSES, RECLOSERS & SECTIONALISERS ....................................................... 1

LV Isolators / Fuses ..................................................................................................................... 2
LVABC – Isolators / Fuses ........................................................................................................... 4
HV EDO Fuses.............................................................................................................................. 7
HV Links ..................................................................................................................................... 21
Air Break Switches .................................................................................................................... 27
Reclosers ................................................................................................................................... 35
Sectionalisers ............................................................................................................................ 50
Load Break Switches ................................................................................................................. 65
Poletop Steelwork Details ........................................................................................................ 73

Conductors, Cables, Connectors & Associated Fittings Page 5-1

Overhead Distribution Construction Standard Section 5

LV Isolators / Fuses
5.1.1 LV Open Wire - Crossarm Mounted Isolators / Fuses

Switches, Fuses, Reclosers & Sectionalisers Page 5-2

Overhead Distribution Construction Standard Section 5

5.1.2 LVABC – Isolators / Fuses

Switches, Fuses, Reclosers & Sectionalisers Page 5-3

Overhead Distribution Construction Standard Section 5

LVABC – Isolators / Fuses

Switches, Fuses, Reclosers & Sectionalisers Page 5-4

Overhead Distribution Construction Standard Section 5

LVABC – Isolators / Fuses

Switches, Fuses, Reclosers & Sectionalisers Page 5-5

Overhead Distribution Construction Standard Section 5

5.2.1 LV Fuse Selection

FUSE LV FUSE RATING

S.I. No.
TYPE & SIZE (AMPS)
NH-00 63 22.22.07
NH-00 80 22.22.08
NH-00 100 22.22.09
NH-00 125 22.22.10
NH-00 160 22.22.11
NH-2 160 22.22.21
NH-2 250 22.22.22
NH-2 315 22.22.23
NH-2 400 22.22.24
OTKF 250 22.26.89
OTKF 450 22.28.20

Switches, Fuses, Reclosers & Sectionalisers Page 5-6

Overhead Distribution Construction Standard Section 5

HV EDO Fuses
5.3.1 HV Crossarm Mounted – EDO Fuses

Switches, Fuses, Reclosers & Sectionalisers Page 5-7

Overhead Distribution Construction Standard Section 5

HV - Crossarm Mounted EDO Fuses – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EDO/X/1/PLM S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1 phase 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
includes EDO crossarm 63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 2
excludes Top HV construction, 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
leads and connectors 75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 2
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
EDO/X/3/PLM S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
3 phase 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
includes EDO crossarm 63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
excludes Top HV construction, 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
leads and connectors 75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2

Switches, Fuses, Reclosers & Sectionalisers Page 5-8

Overhead Distribution Construction Standard Section 5

5.3.2 HV EDO Fuses with Strain Construction

Switches, Fuses, Reclosers & Sectionalisers Page 5-9

Overhead Distribution Construction Standard Section 5

HV EDO Fuses with Strain Construction – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
FDO/11/1/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
FDO/22/1/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1 phase 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
includes EDO crossarm and 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
strain construction 60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 4
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 4
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 4
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 4
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 2
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
85A 50248 COACH SCREW,HEX HEAD 12MM X 75MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 10
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 4
FDO/11/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
FDO/22/3/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
3 phase 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
includes EDO crossarm and 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
strain construction 60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 9
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
85A 50248 COACH SCREW,HEX HEAD 12MM X 75MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 11
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 6

Switches, Fuses, Reclosers & Sectionalisers Page 5-10

Overhead Distribution Construction Standard Section 5

5.3.3 HV EDO Fuses with Tee-Off Construction

Switches, Fuses, Reclosers & Sectionalisers Page 5-11

Overhead Distribution Construction Standard Section 5

HV EDO Fuses with Tee-Off Construction – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
FDO/11/1/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
FDO/22/1/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1 phase 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
includes EDO crossarm and 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
strain construction 60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 4
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 4
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 4
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 4
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 2
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 8
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
85A 50248 COACH SCREW,HEX HEAD 12MM X 75MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 10
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 4
FDO/11/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
FDO/22/3/PLM 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
3 phase 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
includes EDO crossarm and 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
strain construction 60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 9
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
85A 50248 COACH SCREW,HEX HEAD 12MM X 75MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 11
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 6

Switches, Fuses, Reclosers & Sectionalisers Page 5-12

Overhead Distribution Construction Standard Section 5

5.3.4 Powder Filled Fuses – Double Crossarm Mounting

Switches, Fuses, Reclosers & Sectionalisers Page 5-13

Overhead Distribution Construction Standard Section 5

5.3.5 EDO Fuse Elements

Type Rating Item No. Stock Item

STD EDO Fus e Elem ent AK1 1A 113A 225441
Use w ith base 5A 113D 225444
63M S.I. No. 23.63.23 16A 113G 225447
20A 113H 225449
25A 113J 225430
31.5A 113K 225431
40A 113L 225432
50A 113M 225433
63A 113N 225434
80A 113P 22435
100A 113Q 225436
6/20A
113R
Surgeproof 225448
SOLID LINK
113S
200A 236370
SMU Fus e Elem ent 6A 113T 236391
Use w ith base 15A 113U 236392
63M S.I. No. 23.63.23 25A 113V 236393
Pow der Fuse (Boric A cid) 30A 113W 236394
50A 113X 236397
STD EDO Fus e Elem ent 5A 113Y 236336
Use w ith base 10A 113Z 236329
63M S.I. No. 23.63.23 15A 113AA 236331
20A 113AB 236332
Powder filled fus e 12kV
118A
360m m long 10A 225111
Use w ith base 31.5A 118D 225121
63M S.I. No. 22.10.70 40A 118E 225122
Powder filled fus e 24kV
118H
595m m long 10A 225196
Use w ith base 16A 118J 225197
63M S.I. No. 22.10.72 20A 118K 225198
25A 118L 225199
31.5A 118M 225201

Switches, Fuses, Reclosers & Sectionalisers Page 5-14

Overhead Distribution Construction Standard Section 5

5.3.6 NEK Stranger (A B Chance) EDOs

DROPOUT EXPULSION FUSE

24kV 100 AMP
S.I. No. COMPLETE FUSE 63M 23.63.23
S.I. No. FUSE TUBE 30C 23.55.01
RATED VOLTAGE 24kV
RATED CURRENT 100 AMP
RATED BREAKING CAPACITY (SYM) 8kA
BASIC INSULATION LEVEL 150kV
CREEPAGE TO EARTH 450mm

Switches, Fuses, Reclosers & Sectionalisers Page 5-15

Overhead Distribution Construction Standard Section 5

5.3.7 Morlynn EDOs (Obsolete)

DROPOUT EXPULSION FUSE

24kV 100 AMP
S.I. No., COMPLETE FUSE 23.63.20
S.I. No., COMPLETE FUSE WITH SPARK CATCHER 23.63.21
S.I. No., FUSE TUBE 23.63.73
S.I. No. EXPENDABLE DISC 23.63.66
FUSE TUBE, COLOUR GREY
FUSE TUBE, LENGTH 'L' mm 500
FUSE TUBE, ANGLE OF TILT (DEG) 40
FUSE, FAULT RATING AT 11kV & 22kV (KA) 8
WITH SPARK CATCHER (KA) 2

Switches, Fuses, Reclosers & Sectionalisers Page 5-16

Overhead Distribution Construction Standard Section 5

Morlynn EDOs (Obsolete) – Notes

Switches, Fuses, Reclosers & Sectionalisers Page 5-17

Overhead Distribution Construction Standard Section 5

5.3.8 ABB EDOs (Obsolete)

DROPOUT EXPULSION FUSE

24kV 100 AMP
S.I. No., COMPLETE FUSE 23.63.22
S.I. No.FUSE TUBE 30C 23.55.01
RATED VOLTAGE 24kV
RATED CURRENT 100 AMP
RATED BREKING CAPACITY (SYM) 8kA
BASIC INSULATION LEVEL 150kV
CREEPAGE TO EARTH 450mm

Switches, Fuses, Reclosers & Sectionalisers Page 5-18

Overhead Distribution Construction Standard Section 5

5.3.9 Power Fuse (Boric Acid)

Switches, Fuses, Reclosers & Sectionalisers Page 5-19

Overhead Distribution Construction Standard Section 5

Power Fuse (Boric Acid)

SMU20 FUSE ELEMENT TYPE AMP RATING S.I. No. ITEM No.
'K' PART No 703006 6A 23.63.91 113T
'K' PART No 703015 15A 23.63.92 113U
'K' PART No 703025 25A 23.63.93 113V
'K' PART No 703030 30A 23.63.94 113W
'K' PART No 703030 50A 23.63.97 113X

Switches, Fuses, Reclosers & Sectionalisers Page 5-20

Overhead Distribution Construction Standard Section 5

HV Links
5.4.1 HV Links in Strain Construction

Switches, Fuses, Reclosers & Sectionalisers Page 5-21

Overhead Distribution Construction Standard Section 5

HV Links in Strain Construction – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
L/11/3/PLM S 4 323311 BRACKET,RIGHT ANGLE 75 X 12MM GAL 2
L/22/3/PLM 7 323318 PLATE,MOUNTING 110 X 10MM HORIZONTAL LNK 3
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 6
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
#N/A 236098 SWITCHING GROUP,24KV X 1P O/SLUNG NO-AD 3
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

Switches, Fuses, Reclosers & Sectionalisers Page 5-22

Overhead Distribution Construction Standard Section 5

5.4.2 Vertical Links in HV Strain Pole

Switches, Fuses, Reclosers & Sectionalisers Page 5-23

Overhead Distribution Construction Standard Section 5

Vertical Links in HV Strain Pole – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
VL/11/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
VL/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
1G 323309 CROSSARM,STEEL 75 X 75 X 2210MM GAL 2
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 6
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 8
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 10
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
9A 323325 #N/A 3
#N/A 236089 SWITCHING GROUP,24KV X 1P VERTICAL CW-AD 3
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 2
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 3
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 9

Switches, Fuses, Reclosers & Sectionalisers Page 5-24

Overhead Distribution Construction Standard Section 5

5.4.3 Tee-Off Vertical HV Links

Switches, Fuses, Reclosers & Sectionalisers Page 5-25

Overhead Distribution Construction Standard Section 5

Tee-Off Vertical HV Links – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
TL/11/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
TL/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 1
excludes top HV construction, 1G 323309 CROSSARM,STEEL 75 X 75 X 2210MM GAL 2
bridging and connectors 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 4
includes Tee-off crossarm 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 3
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 3
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 3
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 6
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 8
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
9A 323325 #N/A 3
#N/A 236089 SWITCHING GROUP,24KV X 1P VERTICAL CW-AD 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 12

Switches, Fuses, Reclosers & Sectionalisers Page 5-26

Overhead Distribution Construction Standard Section 5

Air Break Switches

5.5.1 Horizontal ABS AK Power

Switches, Fuses, Reclosers & Sectionalisers Page 5-27

Overhead Distribution Construction Standard Section 5

Horizontal ABS AK Power – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
ABS/11/3/PLM S 63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD 1
ABS/22/3/PLM 75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
excludes HV strain construction, 86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
lugs and earthing

Switches, Fuses, Reclosers & Sectionalisers Page 5-28

Overhead Distribution Construction Standard Section 5

5.5.2 Vertical ABS – AK Power

Switches, Fuses, Reclosers & Sectionalisers Page 5-29

Overhead Distribution Construction Standard Section 5

Vertical ABS – AK Power – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description
ABSV/11/3/PLM S 63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD
ABSV/22/3/PLM 75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT
excludes HV strain construction, 86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL
lugs and earthing

Switches, Fuses, Reclosers & Sectionalisers Page 5-30

Overhead Distribution Construction Standard Section 5

5.5.3 Horizontal ABS – ABB (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-31

Overhead Distribution Construction Standard Section 5

Horizontal ABS – ABB (Obsolete) – Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
ABS/11/3 S 75N 032288 Bolt Hex M16 X 350 2
ABS/11/3 S 86B 065158 Washer Els 16 2
ABS/11/3 S 82A 40441 Nut Hex M16 2
ABS/11/3 S 152726 Conduit Rigid 40mm grey 1
ABS/11/3 S 63G 235705 Sw itch Air Break ABB horz unitised, arc device 1
ABS/11/3 S 35J 152491 Lug Crimp Bimetal 150mm2 M12 6
ABS/11/3 S 23C 242847 Clamp Hose 35 to 54mm 2
ABS/11/3 S 42B 244207 Dow n Rod 25mm NB Pipe 6.5m 1
ABS/11/3 S 60G 321260 Insulator,Disc 12
ABS/11/3 S 61A 322056 Ball Clevis & Pin 6
ABS/11/3 S 61D 322090 Kink Pin 6
ABS/11/3 S 61B 322386 Socket Termination 6
ABS/11/3 S 40 323372 Earthing Bracket 1
ABS/11/3 S 73A 032177 Bolt Hex M10 X 25 2
ABS/11/3 S 87B 065614 Washer M10 NS 4
ABS/11/3 S 82E 040439 Nut Hex M10 2
ABS/11/3 S 84C 050228 Coach Screw M10 x 80 1
ABS/11/3 S 35 1413xx Cu Crimp Lug 2

ABS/22/3 S 75N 032288 Bolt Hex M16 X 350 2

ABS/22/3 S 86B 065158 Washer Els 16 2
ABS/22/3 S 82A 40441 Nut Hex M16 2
ABS/22/3 S 152726 Conduit Rigid 40mm grey 1
ABS/22/3 S 63G 235705 Sw itch Air Break ABB horz unitised, arc device 1
ABS/22/3 S 35J 152491 Lug Crimp Bimetal 150mm2 M12 6
ABS/22/3 S 23C 242847 Clamp Hose 35 to 54mm 2
ABS/22/3 S 42B 244207 Dow n Rod 25mm NB Pipe 6.5m 1
ABS/22/3 S 60G 321260 Insulator,Disc 12
ABS/22/3 S 61A 322056 Ball Clevis & Pin 6
ABS/22/3 S 61D 322090 Kink Pin 6
ABS/22/3 S 61B 322386 Socket Termination 6
ABS/22/3 S 40 323372 Earthing Bracket 1
ABS/22/3 S 73A 032177 Bolt Hex M10 X 25 2
ABS/22/3 S 87B 065614 Washer M10 NS 4
ABS/22/3 S 82E 040439 Nut Hex M10 2
ABS/22/3 S 84C 050228 Coach Screw M10 x 80 1
ABS/22/3 S 35 1413xx Cu Crimp Lug 2

Switches, Fuses, Reclosers & Sectionalisers Page 5-32

Overhead Distribution Construction Standard Section 5

5.5.4 Vertical ABS – ABB (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-33

Overhead Distribution Construction Standard Section 5

Vertical ABS – ABB (Obsolete) – Materials List

Unit_Assembly Store Type Item Ref Stock Item Description Quantity

ABSV/11/3 S 76B 032338 Bolt Hex M20 X 350 2
ABSV/11/3 S 86C 065159 Washer Els 20 2
ABSV/11/3 S 82B 040442 Nut Hex M20 2
ABSV/11/3 S 35J 152491 Lug Crimp Bimetal 150mm 2 M12 3
ABSV/11/3 S 63D 235706 Switch Air Break ABB vert unitised, arc device 1
ABSV/11/3 S 42B 244207 Down Rod 25mm NB Pipe 6.5m 1
ABSV/11/3 S 40 323372 Earthing Bracket 1
ABSV/11/3 S 73A 032177 Bolt Hex M10 X 25 2
ABSV/11/3 S 87B 065614 Washer M10 NS 4
ABSV/11/3 S 82E 040439 Nut Hex M10 2
ABSV/11/3 S 84C 050228 Coach Screw M10 x 80 1
ABSV/11/3 S 35 1413xx Cu Crimp Lug 2

ABSV/22/3 S 76B 032338 Bolt Hex M20 X 350 2

ABSV/22/3 S 86C 065159 Washer Els 20 2
ABSV/22/3 S 82B 040442 Nut Hex M20 2
ABSV/22/3 S 35J 152491 Lug Crimp Bimetal 150mm 2 M12 3
ABSV/22/3 S 63D 235706 Switch Air Break ABB vert unitised, arc device 1
ABSV/22/3 S 42B 244207 Down Rod 25mm NB Pipe 6.5m 1
ABSV/22/3 S 40 323372 Earthing Bracket 1
ABSV/22/3 S 73A 032177 Bolt Hex M10 X 25 2
ABSV/22/3 S 87B 065614 Washer M10 NS 4
ABSV/22/3 S 82E 040439 Nut Hex M10 2
ABSV/22/3 S 84C 050228 Coach Screw M10 x 80 1
ABSV/22/3 S 35 1413xx Cu Crimp Lug 2

Switches, Fuses, Reclosers & Sectionalisers Page 5-34

Overhead Distribution Construction Standard Section 5

Reclosers
5.6.1 NOJA Recloser with ABS

Switches, Fuses, Reclosers & Sectionalisers Page 5-35

Overhead Distribution Construction Standard Section 5

NOJA Recloser with ABS – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
NOJA/11/3ABS/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 6
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1G 323309 CROSSARM,STEEL 75 X 75 X 2210MM GAL 2
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 13
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 3
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 3
55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 8
55L 225798 CLAMP,T-TYPE 75 X 120MM 7-19MM COND ALUM 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD 1
63W 235709 SWITCHING GROUP,24KV X 3P HOR/VERT NO-AD 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 7
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 4
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 18
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 13
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 6
32183 BOLT,HEX HEAD M10 X 55MM GAL. C/W NUT 6
146859 CONNECTOR,CLAMP LP SPLIT BOLT 70-120MM2 1
152490 LUG,CRIMP 50MM2 X M12 HOLE BI-METAL 2
236088 SWITCHING GROUP,24KV X 1P VERTICAL NO-AD 3
990809 RECLOSER,AUTO 27KV SWITCHING GRP 11KV VT 1
152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

NOJA/22/3ABS/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2

119G 225773 SURGE DIVERTER,OD 10KA X 22KV 6
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1G 323309 CROSSARM,STEEL 75 X 75 X 2210MM GAL 2
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 13
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 3
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 3
55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 8
55L 225798 CLAMP,T-TYPE 75 X 120MM 7-19MM COND ALUM 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD 1
63W 235709 SWITCHING GROUP,24KV X 3P HOR/VERT NO-AD 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 7
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 4
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 18
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 13
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 6
32183 BOLT,HEX HEAD M10 X 55MM GAL. C/W NUT 6
146859 CONNECTOR,CLAMP LP SPLIT BOLT 70-120MM2 1
152490 LUG,CRIMP 50MM2 X M12 HOLE BI-METAL 2
236088 SWITCHING GROUP,24KV X 1P VERTICAL NO-AD 3
990808 RECLOSER,AUTO 22KV SWITCHING GRP 22KV VT 1
152482 LUG,CRIMP 185MM2 X M12 HOLE BI-METAL 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

Switches, Fuses, Reclosers & Sectionalisers Page 5-36

Overhead Distribution Construction Standard Section 5

5.6.2 NOJA Recloser with No ABS

Switches, Fuses, Reclosers & Sectionalisers Page 5-37

Overhead Distribution Construction Standard Section 5

NOJA Recloser with No ABS – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
NOJA/11/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 6
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 13
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 3
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 6
55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 8
55L 225798 CLAMP,T-TYPE 75 X 120MM 7-19MM COND ALUM 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 7
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 4
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 18
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 13
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 6
32183 BOLT,HEX HEAD M10 X 55MM GAL. C/W NUT 6
146859 CONNECTOR,CLAMP LP SPLIT BOLT 70-120MM2 1
152490 LUG,CRIMP 50MM2 X M12 HOLE BI-METAL 2
990809 RECLOSER,AUTO 27KV SWITCHING GRP 11KV VT 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6
NOJA/22/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 6
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
35E 141363 LUG,CRIMP TERMINAL M12 X 70MM2 COPPER 13
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 3
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 6
55H 146856 CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX 8
55L 225798 CLAMP,T-TYPE 75 X 120MM 7-19MM COND ALUM 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 6
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 6
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 7
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 4
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 18
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 13
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 6
32183 BOLT,HEX HEAD M10 X 55MM GAL. C/W NUT 6
146859 CONNECTOR,CLAMP LP SPLIT BOLT 70-120MM2 1
152490 LUG,CRIMP 50MM2 X M12 HOLE BI-METAL 2
990808 RECLOSER,AUTO 22KV SWITCHING GRP 22KV VT 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 6

Switches, Fuses, Reclosers & Sectionalisers Page 5-38

Overhead Distribution Construction Standard Section 5

5.6.3 NOJA Recloser – Retrofit Materials

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
NOJA/11/RETRO/PLM S 119F 225772 Lightning Arrester (NOT L/L TESTED) ABB 11kV 10kA c/w bird cap & M12 studs 1
35E 141363 Lug Crimp 70mm 2 tinned copper 13
35P 141299 Lug Bolted 16mm 2 12 hole 3
55E 144955 Parallel groove clamp (7.5-17.5mm Bi metal) 6
55L 225798 Tee Clamp AL TCDA19 3
60H 320735 Insulator Raychem standoff 24kV set of 3 1
75P 32289 Bolt Hex M16 X 375 4
75R 32291 Bolt Hex M16 X 425 2
76C 32340 Bolt Hex M20 X 400 4
82B 40442 Nut M20 4
86B 65158 Washer Els 16 6
86C 65159 Washer Els 20 4
88A 66412 Washer Tower 12 6
146859 Split Bolt Clamp (for 70-120sq-mm Earth Leads) 1
2
152490 Lug Crimp Bimetal 50mm M12 2
990809 Recloser/Sectionaliser/LBS 11kV NOJA cw Cont. Cubicle, VTs and Leads etc 1
152482 Lug Crimp Bimetal 185mm 2 M12 6

NOJA/22/RETRO/PLM S 119G 225773 Lightning Arrester (NOT L/L TESTED) ABB 22kV 10kA c/w bird cap & M12 studs 6
2
35E 141363 Lug Crimp 70mm tinned copper 13
2
35P 141299 Lug Bolted 16mm 12 hole 3
55E 144955 Parallel groove clamp (7.5-17.5mm Bi metal) 6
55L 225798 Tee Clamp AL TCDA19 3
60H 320735 Insulator Raychem standoff 24kV set of 3 1
75P 32289 Bolt Hex M16 X 375 4
75R 32291 Bolt Hex M16 X 425 2
76C 32340 Bolt Hex M20 X 400 4
82B 40442 Nut M20 4
86B 65158 Washer Els 16 6
86C 65159 Washer Els 20 4
88A 66412 Washer Tower 12 6
146859 Split Bolt Clamp (for 70-120sq-mm Earth Leads) 1
152490 Lug Crimp Bimetal 50mm 2 M12 2
990808 Recloser/Sectionaliser/LBS 22kV NOJA cw Cont. Cubicle, VTs and Leads etc 1
2
152482 Lug Crimp Bimetal 185mm M12 6

Switches, Fuses, Reclosers & Sectionalisers Page 5-39

Overhead Distribution Construction Standard Section 5

5.6.4 Nulec / Schneider Recloser – 22kV with ABS (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-40

Overhead Distribution Construction Standard Section 5

Nulec / Schneider Recloser – 22kV with ABS (Obsolete) – Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
REC/NULEC.22/3.R S 73C 032181 Bolt Hex M10 X 45 6
REC/NULEC.22/3.R S 75L 032286 Bolt Hex M16 X 300 7
REC/NULEC.22/3.R S 75N 032288 Bolt Hex M16 X 350 4
REC/NULEC.22/3.R S 75Q 032290 Bolt Hex M16 X 400 2
REC/NULEC.22/3.R S 78B 033781 Bolt Tow er M16 X 40 10
REC/NULEC.22/3.R S 86B 065158 Washer Els 16 13
REC/NULEC.22/3.R S 87B 065614 Washer Ns 10 6
REC/NULEC.22/3.R S 88A 066412 Washer Tow er 12 6
REC/NULEC.22/3.R S 36F 141299 Lug Bolted 16mm2-12 hole 3
REC/NULEC.22/3.R S 55E 144955 Parallel groove clamp Bi-metal 3
REC/NULEC.22/3.R S 35K 152482 Lug Crimp Bimetal 185mm2 M12 6
REC/NULEC.22/3.R S 119A 225796 Lighting Arrester 10kA 21kV poly EGB21 6
REC/NULEC.22/3.R S 119B 225797 Earth Lead Disconnect E4 to suit 225796 6
REC/NULEC.22/3.R S 55L 225798 Tee Clamp AL - TCDA19 3
REC/NULEC.22/3.R S 119C 225799 Lightning Arrester mount to suit 225796 6
REC/NULEC.22/3.R S 63C 235707 Sw itch Air Break vert unitised 1
REC/NULEC.22/3.R S 42B 244207 Dow n Rod 25mm NB Pipe 6.5m 1
REC/NULEC.22/3.R S 60G 321260 Insulator,Disc 12
REC/NULEC.22/3.R S 61A 322056 Ball Clevis & Pin 6
REC/NULEC.22/3.R S 61D 322090 Kink Pin 12
REC/NULEC.22/3.R S 61B 322386 Socket Termination 6
REC/NULEC.22/3.R S 1D 323304 Crossarm Mk4 1
REC/NULEC.22/3.R S 1E 323305 Crossarm Mk5 2
REC/NULEC.22/3.R S 2A 323314 Crossarm Strap Mk14 6

Switches, Fuses, Reclosers & Sectionalisers Page 5-41

Overhead Distribution Construction Standard Section 5

5.6.5 Modem for Recloser

Switches, Fuses, Reclosers & Sectionalisers Page 5-42

Overhead Distribution Construction Standard Section 5

Modem for Recloser – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
MODEM/RECLOSER S 37B 152630 CONDUIT,FLEX CRGTD PVC 20MM X 50M MD GRY 10
133155 PLUG,TNC CRIMP CONNECTOR T/S RG58U CABLE 2
133157 BRACKET,ANGLE 1.5MM L-SHAPED MB403SS 1
133158 CONNECTOR,SMA MALE PLUG RG58 CRIMP 2
133159 PROTECTION UNIT,COAXIAL CABLE TCM FM/FM 1
133160 MODEM,DATA CYBERTEC 2255X 4G CELLULAR 1
133174 CABLE,ETHERNET CAT5E 1M BLUE PATCH LEAD 1
231320 SWITCH,ISOLATION 20A X 250V X 2P LV OD 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-43

Overhead Distribution Construction Standard Section 5

5.6.6 ESR 11kV Recloser (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-44

Overhead Distribution Construction Standard Section 5

ESR 11kV Recloser (Obsolete) – Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
REC/ESR.11/3 S 75M 032287 Bolt Hex M16 X 325 1
REC/ESR.11/3 S 75N 032288 Bolt Hex M16 X 350 5
REC/ESR.11/3 S 75P 032289 Bolt Hex M16 X 375 5
REC/ESR.11/3 S 77B 033771 Bolt Tow er M12 X 35 9
REC/ESR.11/3 S 86B 065158 Washer Els 16 11
REC/ESR.11/3 S 88A 066412 Washer Tow er 12 9
REC/ESR.11/3 S 51D 103213 Cond Cu Ins HD 1c 70mm2 12
REC/ESR.11/3 S 62E 144617 Bushing Cover 11kV 6
REC/ESR.11/3 S 33 155132 Clamp Brass - earth rod 6
REC/ESR.11/3 S 63G 235705 Sw itch Air Break horz ARC unitised 1
REC/ESR.11/3 S 63C 235707 Sw itch Air Break vert unitised 1
REC/ESR.11/3 S 63L 236088 Sw itch Isol Vert 24kV single phase 3
REC/ESR.11/3 S 9B 236140 Fuse Bracket Stanger 3
REC/ESR.11/3 S 42B 244207 Dow n Rod 25mm NB Pipe 6.5m 2
REC/ESR.11/3 S 60E 320531 Insulator,Pin 22/450 3
REC/ESR.11/3 S 60G 321260 Insulator,Disc 6
REC/ESR.11/3 S 61A 322056 Ball Clevis & Pin 6
REC/ESR.11/3 S 61D 322090 Kink Pin 6
REC/ESR.11/3 S 61B 322386 Socket Termination 6
REC/ESR.11/3 S 59A 322721 Pin,Insulator 22kV 3
REC/ESR.11/3 S 1D 323304 Crossarm Mk4 1
REC/ESR.11/3 S 1G 323309 Crossarm Mk9 2
REC/ESR.11/3 S 2A 323314 Crossarm Strap Mk14 4
REC/ESR.11/3 S 990426 Recloser ESR 12kV 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-45

Overhead Distribution Construction Standard Section 5

5.6.7 ESR SF6 11kV Recloser (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-46

Overhead Distribution Construction Standard Section 5

ESR SF6 11kV Recloser (Obsolete) – Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
REC/ESR.11/3.RAD S 75L 032286 Bolt Hex M16 X 300 2
REC/ESR.11/3.RAD S 75P 032289 Bolt Hex M16 X 375 6
REC/ESR.11/3.RAD S 77B 033771 Bolt Tow er M12 X 35 6
REC/ESR.11/3.RAD S 86B 065158 Washer Els 16 18
REC/ESR.11/3.RAD S 88A 066412 Washer Tow er 12 6
REC/ESR.11/3.RAD S 51D 103213 Cond Cu Ins HD 1c 70mm2 18
REC/ESR.11/3.RAD S 62F 144620 Bushing Cover 22kV 6
REC/ESR.11/3.RAD S 33 155132 Clamp Brass - earth rod 6
REC/ESR.11/3.RAD S 63C 235707 Sw itch Air Break vert unitised 1
REC/ESR.11/3.RAD S 42B 244207 Dow n Rod 25mm NB Pipe 6.5m 1
REC/ESR.11/3.RAD S 60E 320531 Insulator,Pin 22/450 3
REC/ESR.11/3.RAD S 60G 321260 Insulator,Disc 6
REC/ESR.11/3.RAD S 61A 322056 Ball Clevis & Pin 6
REC/ESR.11/3.RAD S 61D 322090 Kink Pin 6
REC/ESR.11/3.RAD S 61B 322386 Socket Termination 6
REC/ESR.11/3.RAD S 59A 322721 Pin,Insulator 22kV 3
REC/ESR.11/3.RAD S 1D 323304 Crossarm Mk4 1
REC/ESR.11/3.RAD S 1E 323305 Crossarm Mk5 2
REC/ESR.11/3.RAD S 2A 323314 Crossarm Strap Mk14 4
REC/ESR.11/3.RAD S 990426 Recloser ESR 12kV 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-47

Overhead Distribution Construction Standard Section 5

5.6.8 Reyrolle OYT 22kV Recloser (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-48

Overhead Distribution Construction Standard Section 5

Reyrolle OYT 22kV Recloser (Obsolete) – Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
REC/OYT.22/3 S 75L 032286 Bolt Hex M16 X 300 3
REC/OYT.22/3 S 75M 032287 Bolt Hex M16 X 325 4
REC/OYT.22/3 S 75N 032288 Bolt Hex M16 X 350 2
REC/OYT.22/3 S 75P 032289 Bolt Hex M16 X 375 4
REC/OYT.22/3 S 77B 033771 Bolt Tow er M12 X 35 20
REC/OYT.22/3 S 78B 033781 Bolt Tow er M16 X 40 6
REC/OYT.22/3 S 86B 065158 Washer Els 16 13
REC/OYT.22/3 S 88A 066412 Washer Tow er 12 20
REC/OYT.22/3 S 88B 066413 Washer Tow er 16 6
REC/OYT.22/3 S 52C 102372 Cond Cu 2nd Hand 19/.064 kg 4
REC/OYT.22/3 S 62F 144620 Bushing Cover 22kV 6
REC/OYT.22/3 S 33 155132 Clamp Brass - earth rod 6
REC/OYT.22/3 S 41B 157877 Sleeving 6 ID 2 Wall 12
REC/OYT.22/3 S 158582 Tubing spiral 12mm 3
REC/OYT.22/3 S 63G 235705 Sw itch Air Break horz ARC unitised 1
REC/OYT.22/3 S 63C 235707 Sw itch Air Break vert unitised 1
REC/OYT.22/3 S 63L 236088 Sw itch Isol Vert 24kV single phase 3
REC/OYT.22/3 S 9B 236140 Fuse Bracket Stanger 3
REC/OYT.22/3 S 42B 244207 Dow n Rod 25mm NB Pipe 6.5m 2
REC/OYT.22/3 S 60E 320531 Insulator,Pin 22/450 3
REC/OYT.22/3 S 60G 321260 Insulator,Disc 12
REC/OYT.22/3 S 61A 322056 Ball Clevis & Pin 6
REC/OYT.22/3 S 61D 322090 Kink Pin 6
REC/OYT.22/3 S 61B 322386 Socket Termination 6
REC/OYT.22/3 S 59A 322721 Pin,Insulator 22kV 3
REC/OYT.22/3 S 1D 323304 Crossarm Mk4 1
REC/OYT.22/3 S 1G 323309 Crossarm Mk9 2
REC/OYT.22/3 S 2A 323314 Crossarm Strap Mk14 8
REC/OYT.22/3 S 46D 323875 Recloser Member complete 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-49

Overhead Distribution Construction Standard Section 5

Sectionalisers
5.7.1 Automatic Sectionaliser Notes

Switches, Fuses, Reclosers & Sectionalisers Page 5-50

Overhead Distribution Construction Standard Section 5

Automatic Sectionaliser Notes

Switches, Fuses, Reclosers & Sectionalisers Page 5-51

Overhead Distribution Construction Standard Section 5

5.7.2 Automatic Sectionaliser 3 Phase (ABB – Autolink)

Switches, Fuses, Reclosers & Sectionalisers Page 5-52

Overhead Distribution Construction Standard Section 5

5.7.3 AK Power Automatic Sectionaliser – In-line

Switches, Fuses, Reclosers & Sectionalisers Page 5-53

Overhead Distribution Construction Standard Section 5

AK Power Automatic Sectionaliser – In-line – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SEC/11/3/PLM S 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
SEC/22/3/PLM 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
excludes HV strain construction 75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
11kV or 22kV 75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 4
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
235714 1
236335 ACTUATOR,HEX HEAD 8MM DIA 2-LEADS BRASS 3

Switches, Fuses, Reclosers & Sectionalisers Page 5-54

Overhead Distribution Construction Standard Section 5

5.7.4 AK Power Automatic Sectionaliser – Tee-Off

Switches, Fuses, Reclosers & Sectionalisers Page 5-55

Overhead Distribution Construction Standard Section 5

AK Power Automatic Sectionaliser – Tee-Off – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SECT/11/3/PLM S 3 323310 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL 2
SECT/22/3/PLM 1E 323305 CROSSARM,STEEL 100 X 100 X 2210MM GAL 2
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT 3
includes tee-off xarm 55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 3
excludes top HV construction 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
11kV or 22kV 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 6
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 3
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 3
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 18
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
235714 1
236335 ACTUATOR,HEX HEAD 8MM DIA 2-LEADS BRASS 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

Switches, Fuses, Reclosers & Sectionalisers Page 5-56

Overhead Distribution Construction Standard Section 5

5.7.5 Sectionaliser with Vertical ABS on Same Side of Pole

Switches, Fuses, Reclosers & Sectionalisers Page 5-57

Overhead Distribution Construction Standard Section 5

Sectionaliser with Vertical ABS on Same Side of Pole – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SECABS/11/3/PLM S 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
SECABS/22/3/PLM 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
excludes top HV construction 63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD 1
11kV or 22kV 6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
235714 1
236335 ACTUATOR,HEX HEAD 8MM DIA 2-LEADS BRASS 3

Switches, Fuses, Reclosers & Sectionalisers Page 5-58

Overhead Distribution Construction Standard Section 5

5.7.6 Sectionaliser with Vertical ABS on Opposite Side of Pole

Switches, Fuses, Reclosers & Sectionalisers Page 5-59

Overhead Distribution Construction Standard Section 5

Sectionaliser with Vertical ABS on Opposite Side of Pole – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SECABS/11/3/PLM S 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
SECABS/22/3/PLM 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
excludes top HV construction 63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD 1
11kV or 22kV 6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
235714 1
236335 ACTUATOR,HEX HEAD 8MM DIA 2-LEADS BRASS 3

Switches, Fuses, Reclosers & Sectionalisers Page 5-60

Overhead Distribution Construction Standard Section 5

5.7.7 Sectionaliser with Horizontal Bypass ABS

Switches, Fuses, Reclosers & Sectionalisers Page 5-61

Overhead Distribution Construction Standard Section 5

Sectionaliser with Horizontal Bypass ABS – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SECABS/11/3/PLM S 59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
SECABS/22/3/PLM 60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
excludes top HV construction 63V 235708 SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD 1
11kV or 22kV 6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
235714 1
236335 ACTUATOR,HEX HEAD 8MM DIA 2-LEADS BRASS 3

Switches, Fuses, Reclosers & Sectionalisers Page 5-62

Overhead Distribution Construction Standard Section 5

5.7.8 Single Phase Sectionaliser

Switches, Fuses, Reclosers & Sectionalisers Page 5-63

Overhead Distribution Construction Standard Section 5

Single Phase Sectionaliser – Materials List

Unit_Assem bly Store Type Item Ref Stock Item Description Quantity
SEC/11/1 S 75N 032286 Bolt Hex M16 X 350 3
SEC/11/1 S 77A 033770 Bolt Tow er M12 X 30 3
SEC/11/1 S 77B 033771 Bolt Tow er M12 X 35 1
SEC/11/1 S 86B 065158 Washer Els 16 1
SEC/11/1 S 88A 066412 Washer Tow er 12 4
SEC/11/1 S 2A 323314 Crossarm Strap Mk14 2
SEC/11/1 S 236335 Actuator to suit ABB Sectionaliser 2
SEC/11/1 S 1D 323304 Crossarm Mk4 1
SEC/11/1 S 2B 323317 Crossarm Strap Mk17 1

SEC/22/1 S 75N 032286 Bolt Hex M16 X 350 3

SEC/22/1 S 77A 033770 Bolt Tow er M12 X 30 3
SEC/22/1 S 77B 033771 Bolt Tow er M12 X 35 4
SEC/22/1 S 86B 065158 Washer Els 16 1
SEC/22/1 S 88A 066412 Washer Tow er 12 4
SEC/22/1 S 60G 321260 Insulator,Disc 8
SEC/22/1 S 2A 323314 Crossarm Strap Mk14 2
SEC/22/1 S 236335 Actuator to suit ABB Sectionaliser 2
SEC/22/1 S 1D 323304 Crossarm Mk4 1
SEC/22/1 S 2B 323317 Crossarm Strap Mk17 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-64

Overhead Distribution Construction Standard Section 5

Load Break Switches

5.8.1 Manual Schneider / Nulec RL27 Load Break Switch Above HV Strain
Construction

Switches, Fuses, Reclosers & Sectionalisers Page 5-65

Overhead Distribution Construction Standard Section 5

Manual Schneider / Nulec RL27 Load Break Switch Above HV Strain Construction –
Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
LBSWM/11/3/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 6
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 6
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
157891 SLEEVING,ELECT INSUL S/T 20MM X 7.6M GRY 1
235730 SWITCH,L/BRKR LBS RL27 11KV MANUAL N-A 1
LBSWM/22/3/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 6
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 6
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
157891 SLEEVING,ELECT INSUL S/T 20MM X 7.6M GRY 1
235733 SWITCH,L/BRKR LBS RL27 22KV MANUAL N-A 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-66

Overhead Distribution Construction Standard Section 5

5.8.2 Manual Schneider / Nulec RL27 Load Break Switch Tee-Off to UG Cable

Switches, Fuses, Reclosers & Sectionalisers Page 5-67

Overhead Distribution Construction Standard Section 5

Manual Schneider / Nulec RL27 Load Break Switch Tee-Off to UG Cable – Materials
List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
LBSWM/11/3/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 6
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 6
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
157891 SLEEVING,ELECT INSUL S/T 20MM X 7.6M GRY 1
235730 SWITCH,L/BRKR LBS RL27 11KV MANUAL N-A 1
LBSWM/22/3/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 6
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 6
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM 12
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
157891 SLEEVING,ELECT INSUL S/T 20MM X 7.6M GRY 1
235733 SWITCH,L/BRKR LBS RL27 22KV MANUAL N-A 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-68

Overhead Distribution Construction Standard Section 5

5.8.3 Remotely Controllable Schneider / Nulec RL27 Load Break Switch Below
HV Strain Construction

Switches, Fuses, Reclosers & Sectionalisers Page 5-69

Overhead Distribution Construction Standard Section 5

Remotely Controllable Schneider / Nulec RL27 Load Break Switch Below HV Strain
Construction – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
CLBSWA/11/3/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
84B 50226 COACH SCREW,HEX HEAD 10MM X 65MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
40439 NUT,HEX M10 THREAD GALANISED STEEL 6
133155 PLUG,TNC CRIMP CONNECTOR T/S RG58U CABLE 2
133157 BRACKET,ANGLE 1.5MM L-SHAPED MB403SS 1
133158 CONNECTOR,SMA MALE PLUG RG58 CRIMP 2
133159 PROTECTION UNIT,COAXIAL CABLE TCM FM/FM 1
133174 CABLE,ETHERNET CAT5E 1M BLUE PATCH LEAD 1
231320 SWITCH,ISOLATION 20A X 250V X 2P LV OD 1
235732 SWITCH,L/BRKR LBS RL27 11KV FULLY AUTO 1
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
990800 RECLOSER,T/FORMER 11000/27.8V POLE MOUNT 1

CLBSWA/22/3/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3

35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
84B 50226 COACH SCREW,HEX HEAD 10MM X 65MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
40439 NUT,HEX M10 THREAD GALANISED STEEL 6
133155 PLUG,TNC CRIMP CONNECTOR T/S RG58U CABLE 2
133157 BRACKET,ANGLE 1.5MM L-SHAPED MB403SS 1
133158 CONNECTOR,SMA MALE PLUG RG58 CRIMP 2
133159 PROTECTION UNIT,COAXIAL CABLE TCM FM/FM 1
133174 CABLE,ETHERNET CAT5E 1M BLUE PATCH LEAD 1
231320 SWITCH,ISOLATION 20A X 250V X 2P LV OD 1
235735 SWITCH,L/BRKR LBS RL27 22KV FULLY AUTO 1
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
990801 RECLOSER,T/FORMER 22000/27.8V POLE MOUNT 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-70

Overhead Distribution Construction Standard Section 5

5.8.4 Remotely Controllable Schneider / Nulec RL27 Load Break Switch Tee-Off
to UG Cable

Switches, Fuses, Reclosers & Sectionalisers Page 5-71

Overhead Distribution Construction Standard Section 5

Remotely Controllable Schneider / Nulec RL27 Load Break Switch Tee-Off to UG

Cable – Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
CLBSWA/11/3/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
84B 50226 COACH SCREW,HEX HEAD 10MM X 65MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
40439 NUT,HEX M10 THREAD GALANISED STEEL 6
133155 PLUG,TNC CRIMP CONNECTOR T/S RG58U CABLE 2
133157 BRACKET,ANGLE 1.5MM L-SHAPED MB403SS 1
133158 CONNECTOR,SMA MALE PLUG RG58 CRIMP 2
133159 PROTECTION UNIT,COAXIAL CABLE TCM FM/FM 1
133174 CABLE,ETHERNET CAT5E 1M BLUE PATCH LEAD 1
231320 SWITCH,ISOLATION 20A X 250V X 2P LV OD 1
235732 SWITCH,L/BRKR LBS RL27 11KV FULLY AUTO 1
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
990800 RECLOSER,T/FORMER 11000/27.8V POLE MOUNT 1

CLBSWA/22/3/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3

35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
51C 94180 WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK 12
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
77A 33770 BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT 4
78D 33783 BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
84B 50226 COACH SCREW,HEX HEAD 10MM X 65MM GAL 1
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 1
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 4
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
40439 NUT,HEX M10 THREAD GALANISED STEEL 6
133155 PLUG,TNC CRIMP CONNECTOR T/S RG58U CABLE 2
133157 BRACKET,ANGLE 1.5MM L-SHAPED MB403SS 1
133158 CONNECTOR,SMA MALE PLUG RG58 CRIMP 2
133159 PROTECTION UNIT,COAXIAL CABLE TCM FM/FM 1
133174 CABLE,ETHERNET CAT5E 1M BLUE PATCH LEAD 1
231320 SWITCH,ISOLATION 20A X 250V X 2P LV OD 1
235735 SWITCH,L/BRKR LBS RL27 22KV FULLY AUTO 1
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
990801 RECLOSER,T/FORMER 22000/27.8V POLE MOUNT 1

Switches, Fuses, Reclosers & Sectionalisers Page 5-72

Overhead Distribution Construction Standard Section 5

Poletop Steelwork Details

5.9.1 LVABC Fuse Switch Bracket

Switches, Fuses, Reclosers & Sectionalisers Page 5-73

Overhead Distribution Construction Standard Section 5

5.9.2 Recloser Steelwork Detail (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-74

Overhead Distribution Construction Standard Section 5

Recloser Steelwork Detail (Obsolete)

Switches, Fuses, Reclosers & Sectionalisers Page 5-75

Overhead Distribution Construction Standard Section 5

5.9.3 ABS Termination Bar

Switches, Fuses, Reclosers & Sectionalisers Page 5-76

Overhead Distribution Construction Standard Section 6

6 SECTION 6 – POLE SUBSTATIONS / TRANSFORMERS

6 SECTION 6 – POLE SUBSTATIONS / TRANSFORMERS .......................................................................... 1

6.1 Pole Substations – General ........................................................................................................ 2
6.2 50 kVA Single Phase Pole Substations ....................................................................................... 4
6.3 25-63kVA Pole Substations ...................................................................................................... 10
6.4 100 – 315 kVA Pole Substations .............................................................................................. 14
6.5 500 kVA Substation................................................................................................................... 22
6.6 SWER Transformers .................................................................................................................. 26
6.7 LV / LV Isolating Transformer ................................................................................................... 30
6.8 Pole Transformer HV & LV Bridging & Fixing Arrangements .................................................. 31
6.9 Transformer Steelwork Components ...................................................................................... 37

Pole Substations / Transformers Page 6-1

Overhead Distribution Construction Standard Section 6

6.1 Pole Substations – General

6.1.1 Pole Substations Construction Codes

Pole Substations / Transformers Page 6-2

Overhead Distribution Construction Standard Section 6

6.1.2 Pole Substations – Installation notes

Pole Substations / Transformers Page 6-3

Overhead Distribution Construction Standard Section 6

6.2 50 kVA Single Phase Pole Substations

6.2.1 Single Phase Substation 25-50 kVA – Open Wire LV

Pole Substations / Transformers Page 6-4

Overhead Distribution Construction Standard Section 6

Single Phase Substation 25-50 kVA Open Wire Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/LVB/25.50/1 S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
with EDOs 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
(excl transformer, earthing, HV fuse 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
elements, top HV const., LV const.) 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 2
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 2
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 9
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 3
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 4
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 2 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 2
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 2 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
SSB/HVDE/LVB/25.50/1 S 20 323363 BRACKET,ANGLE TRANSPOSITION MK63 GAL 1
with remote fusing 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
(excl transformer, earthing, 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
top HV const., LV const.) 51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 2
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 2
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 5
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 6
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 4
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 2 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 2 (or AR)
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 2
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 2 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR

Pole Substations / Transformers Page 6-5

Overhead Distribution Construction Standard Section 6

6.2.2 Single Pole Sub 25 – 50 kVA – 11 or 22 kV Bolt fixed

Pole Substations / Transformers Page 6-6

Overhead Distribution Construction Standard Section 6

Single Pole Sub 10 – 50 kVA – 11 or 22 kV Bolt fixed Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/ABC/25.50/1 S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
with EDOs 29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
(excl t ransf ormer, eart hing, HV f use 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
element s, t op HV const ., LV const .) 35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 2
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2

63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 2

64F 236247 SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 2
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 6
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 4
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
47N 103003 CABLE,2CORE X 95MM2X 19/2.63X 0.6/1 XLPE 3

62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 2 (or AR)

62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 2 (or AR)

55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 2
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 2 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
94B 145630 CONNECTOR,IPC LV ABC 2
SSB/HVDE/ABC/25.50/1 S 20 323363 BRACKET,ANGLE TRANSPOSITION MK63 GAL 1
with remote fusing 29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
(excl t ransf ormer, eart hing, 35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 2
t op HV const ., LV const .) 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 6
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 2
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 2
64F 236247 SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 6
47N 103003 CABLE,2CORE X 95MM2X 19/2.63X 0.6/1 XLPE 3

62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 2 (or AR)

62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 2 (or AR)

55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 2
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 2 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
94B 145630 CONNECTOR,IPC LV ABC 2

Pole Substations / Transformers Page 6-7

Overhead Distribution Construction Standard Section 6

6.2.3 Single Pole Sub 2 x 50 kVA Single Phase Parallel Bolt fixed Open Wire LV

Pole Substations / Transformers Page 6-8

Overhead Distribution Construction Standard Section 6

Single Pole Sub 2 x 50 kVA Single Phase Parallel 11 or 22 kV Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/LVB/2x50/1 S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
with EDOs 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
(excl t ransf ormer, eart hing, HV f use 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 10
element s, t op HV const ., LV const .) 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 8
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 4
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 2
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 2
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 6
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 4
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 6
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 18
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 12
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 8
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 8
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 8
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 4 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 4 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 2
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 2 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR

Pole Substations / Transformers Page 6-9

Overhead Distribution Construction Standard Section 6

6.3 25-63kVA Pole Substations

6.3.1 Single Pole Sub 25 – 63 kVA 3 Phase 11 or 22 kV Bolt Fixed Open Wire LV

Pole Substations / Transformers Page 6-10

Overhead Distribution Construction Standard Section 6

Single Pole Sub 25 – 63 kVA 3 Phase 11 or 22 kV Open Wire LV Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/LVB/25.63/3 S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
with EDOs 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
(excl transformer, earthing, HV fuse 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 9
elements, top HV const., LV const.) 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 6
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 9
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 4

62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)

62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR

55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
SSB/HVDE/LVB/25.63/3 S 20 323363 BRACKET,ANGLE TRANSPOSITION MK63 GAL 1
with remote fusing 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 9
(excl transformer, earthing, 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 6
top HV const., LV const.) 51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 7
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 10
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 8
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 6

62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)

62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR

55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR

Pole Substations / Transformers Page 6-11

Overhead Distribution Construction Standard Section 6

6.3.2 25 – 63 kVA 3 Phase Bolt Fixed – LVABC

Pole Substations / Transformers Page 6-12

Overhead Distribution Construction Standard Section 6

Single Pole Sub 25 – 63 kVA 3 Phase Bolt Fixed - LVABC Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/ABC/25.63/3 S 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
with EDOs 29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
(excl transformer, earthing, HV fuse 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
elements, top HV const., LV const.) 35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 4
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 9
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47D 103001 CABLE,4CORE X 95MM2X 19/2.63X 0.6/1 XLPE 3
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64F 236247 SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 6
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 1
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 6
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
94B 145630 CONNECTOR,IPC LV ABC 2
SSB/HVDE/ABC/25.63/3 S 20 323363 BRACKET,ANGLE TRANSPOSITION MK63 GAL 1
with remote fusing 29K 323401 BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH 1
(excl transformer, earthing, 35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 4
top HV const., LV const.) 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 9
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47D 103001 CABLE,4CORE X 95MM2X 19/2.63X 0.6/1 XLPE 3
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
64F 236247 SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 2
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 4
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 8
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
94B 145630 CONNECTOR,IPC LV ABC 2

Pole Substations / Transformers Page 6-13

Overhead Distribution Construction Standard Section 6

6.4 100 – 315 kVA Pole Substations

6.4.1 100 – 315 kVA – Cross Arm Hung Open Wire LV

Pole Substations / Transformers Page 6-14

Overhead Distribution Construction Standard Section 6

100 – 315 kVA Cross Arm Hung Open Wire LV Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSC/HVF/LVB/100.315 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
with EDOs 122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
(excl transformer, earthing, HV fuse 14E 323347 BLOCK,TRANS.STAND-OFF
BRACKET,MOUNTING 50X50X5X80MM
TRANSFORMER GAL
HANGING 1
elements, top HV const., LV const.) 15A 323348 GAL 1
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 10
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
77C 33772 BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 5
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 5
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 12
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
SSC/HVDE/LVB/100.315 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
with remote fusing 122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
(excl transformer, earthing, 14E 323347 BLOCK,TRANS.STAND-OFF
BRACKET,MOUNTING 50X50X5X80MM
TRANSFORMER GAL
HANGING 1
top HV const., LV const.) 15A 323348 GAL 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 10
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 7
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 11
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 7
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 5
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 12
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR

Pole Substations / Transformers Page 6-15

Overhead Distribution Construction Standard Section 6

6.4.2 100 – 315 kVA – Cross Arm Hung – LVABC Mains

Pole Substations / Transformers Page 6-16

Overhead Distribution Construction Standard Section 6

100 – 315 kVA Cross Arm Hung – LVABC Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSC/HVF/ABC/100.315 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
with EDOs 122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
(excl transformer, earthing, HV fuse 14E 323347 BLOCK,TRANS.STAND-OFF 50X50X5X80MM GAL 1
elements, top HV const., LV const.) 15A 323348 BRACKET,MOUNTING TRANSFORMER HANGING GAL 1
1A 323210 CROSSARM,WOOD 100 X 100 X 1830MM LONG 1
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47J 103008 CABLE,4CORE X 150MM2 X 0.6/1 XLPE 6
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 2
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 1
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
77C 33772 BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 12
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 7
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 5
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
36F 145661 LUG,CRIMP 150MM2 X M13 HOLE INS. BI-METL 8
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
94B 145630 CONNECTOR,IPC LV ABC 2
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
SSC/HVDE/ABC/100.315 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
with remote fusing 122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
(excl transformer, earthing, 14E 323347 BLOCK,TRANS.STAND-OFF 50X50X5X80MM GAL 1
top HV const., LV const.) 15A 323348 BRACKET,MOUNTING TRANSFORMER HANGING GAL 1
1A 323210 CROSSARM,WOOD 100 X 100 X 1830MM LONG 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47J 103008 CABLE,4CORE X 150MM2 X 0.6/1 XLPE 6
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
64E 236326 SWITCHING GROUP,400A LV 3P POLE MOUNT 1
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 2
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 3
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 1
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 12
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 7
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 12
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 7
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 5
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
36F 145661 LUG,CRIMP 150MM2 X M13 HOLE INS. BI-METL 8
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
94B 145630 CONNECTOR,IPC LV ABC 2
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR

Pole Substations / Transformers Page 6-17

Overhead Distribution Construction Standard Section 6

6.4.3 Single Pole Sub 100 – 315 kVA Bolt Fixed Open Wire LV

Pole Substations / Transformers Page 6-18

Overhead Distribution Construction Standard Section 6

100 – 315 kVA Bolt Fixed – Open Wire Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/LVB/100.315 S 89 66803 WASHER,FLAT SQUARE M20 X75MM GAL.STEEL 2
with EDOs 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
(excl t ransf ormer, eart hing, HV f use 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 2
element s, t op HV const ., LV const .) 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 10
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
77C 33772 BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 11
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 5
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 7
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 5
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
51R 94185 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV RED 12
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
15F 323449 BRACKET,MOUNTING 100-300KVA TRANSFORMERS 1
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
15E 323453 BRACKET, Conversion 100-500kVA TX WILSON 1
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR

Pole Substations / Transformers Page 6-19

Overhead Distribution Construction Standard Section 6

6.4.4 100 – 315 kVA Bolt Fixed - LVABC

Pole Substations / Transformers Page 6-20

Overhead Distribution Construction Standard Section 6

100 – 315 kVA Bolt Fixed – LVABC Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/HVF/ABC/100.315 S 89 66803 WASHER,FLAT SQUARE M20 X75MM GAL.STEEL 2
with EDOs 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
(excl t ransf ormer, eart hing, HV f use 1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
element s, t op HV const ., LV const .) 2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
36F 145661 LUG,CRIMP 150MM2 X M13 HOLE INS. BI-METL 8
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47J 103008 CABLE,4CORE X 150MM2 X 0.6/1 XLPE 6
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
77C 33772 BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 5
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 2
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 5
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
15F 323449 BRACKET,MOUNTING 100-300KVA TRANSFORMERS 1
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
94B 145630 CONNECTOR,IPC LV ABC 2
SSB/HVDE/ABC/100.315 S 20 323363 BRACKET,ANGLE TRANSPOSITION MK63 GAL 1
with remote fusing 89 66803 WASHER,FLAT SQUARE M20 X75MM GAL.STEEL 2
(excl t ransf ormer, eart hing, 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
t op HV const ., LV const .) 35B 145653 TERMINAL,LUG COMPRESSION M13 X 95MM2 8
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47D 103001 CABLE,4CORE X 95MM2X 19/2.63X 0.6/1 XLPE 6
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 3
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 4
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 5
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 5
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 5
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
15F 323449 BRACKET,MOUNTING 100-300KVA TRANSFORMERS 1
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
94B 145630 CONNECTOR,IPC LV ABC 2

Pole Substations / Transformers Page 6-21

Overhead Distribution Construction Standard Section 6

6.5 500 kVA Substation

6.5.1 500 kVA Cross Arm Hung – Open Wire LV

Pole Substations / Transformers Page 6-22

Overhead Distribution Construction Standard Section 6

500 kVA Cross Arm Hung – Open Wire LV Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSC/HVF/LVB/500 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
with EDOs 122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
(excl transformer, earthing, HV fuse 14E 323347 BLOCK,TRANS.STAND-OFF 50X50X5X80MM GAL 1
elements, top HV const., LV const.) 15A 323348 BRACKET,MOUNTING TRANSFORMER HANGING GAL 1
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
36E 141306 LUG,BOLTED TERMINAL M16 X 150-185MM2 CU 8
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 6
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76F 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
77C 33772 BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 8
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 5
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 5
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
117K 222820 FUSE LINK,CT-4HF 450A/415V 61.1 X 209MM 6
51S 94195 WIRE,BLDNG 150MM2 X 37/2.25 XLPE BLACK 16
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
15E 323453 BRACKET, Conversion 100-500kVA TX WILSON 1
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
SSC/HVDE/LVB/500 S 105C 77506 Anchor Block Concrete 1
with remote fusing 122A 33744 Bolt Tower M20 X 45 2
(excl transformer, earthing, 14E 323347 Transformer Stand Off Block 1
top HV const., LV const.) 15A 323348 T/F Hanging Bracket - Mk48 LV Crossarm Bracket 1
35P 141299 Lug Bolted 16mm2 12 hole 12
36C 141304 Q LUG bolted 50 70mm2 tinned copper 2
36E 141306 Q LUG bolted 120 150mm2 tinned copper 8
51P 94184 Wire Electrical Cu 70mm2 1c Black 2
59A 322721 Pin,Insulator 22kV 1
60E 320531 Insulator Pin 22/450 1
64A 236243 Switch Fuse 660V 630A 6
6A 323315 Insulator Bracket Mk15 1
75B 32274 Bolt Hex M16 X 130 3
75N 32288 Bolt Hex M16 X 350 4
76C 32340 Bolt Hex M20 X 400 2
76D 32342 Bolt Hex M20 X 450 2
77B 33771 Bolt Tower M12 X 35 4
82A 40441 Nut M16 7
82B 40442 Nut M20 6
82C 40440 Nut M12 4
85B 50250 Coach Screw M12 X 100 2
86B 65158 Washer Els 16 11
86C 65159 Washer Els 20 7
87E 65617 Washer Ns 20 2
88A 66412 Washer Tower 12 5
88B 66413 Washer Tower 16 3
51E 103217 Wire Electrical Cu 16mm2 1c Black (U/V Resistant) 12
51R 94185 Wire Electrical Cu 70mm2 1c Red 12
123A 72222 Concrete Quick Mix 20kg 1
35Q 141346 Lug Crimp 10mm2 Copper M10 3
117K 222820 450A Exp Fuse Cartridge 415V OTTM450 6
51S 94195 Cable LV Cu 1c 150mm2 c x pvc (Black) 16
62E 144617 Bushing Cover 11kV 3 (or AR)
62F 144620 Bushing Cover 22kV AR
55A 146809 Live Line Clamp 3
55B 146601 Dee Clamp 7/2.75 3 (or AR)
55C 146618 Dee Clamp 19/2.00 AR
15E 323453 BRACKET, Conversion 100-500kVA TX WILSON 1
119F 225772 Surge Diverter 10kA 11kV 3 (or AR)
119G 225773 Surge Diverter 10kA 22kV AR

Pole Substations / Transformers Page 6-23

Overhead Distribution Construction Standard Section 6

6.5.2 500 kVA Cross Arm Hung – LVABC

Pole Substations / Transformers Page 6-24

Overhead Distribution Construction Standard Section 6

500 kVA Cross Arm Hung – LVABC Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSC/HVF/ABC/500 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
with EDOs 117J 222224 FUSE LINK,NH 400A X 415V CKB DIN-2 6
(excl transformer, earthing, HV fuse 122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
elements, top HV const., LV const.) 14E 323347 BLOCK,TRANS.STAND-OFF 50X50X5X80MM GAL 1
15A 323348 BRACKET,MOUNTING TRANSFORMER HANGING GAL 1
1A 323210 CROSSARM,WOOD 100 X 100 X 1830MM LONG 1
1D 323304 CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL 1
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47J 103008 CABLE,4CORE X 150MM2 X 0.6/1 XLPE 12
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 3
64E 236326 SWITCHING GROUP,400A LV 3P POLE MOUNT 2
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 2
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 1
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 3
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 1
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
77C 33772 BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 12
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 7
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 3
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 5
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 2
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
36F 145661 LUG,CRIMP 150MM2 X M13 HOLE INS. BI-METL 16
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
15E 323453 BRACKET, Conversion 100-500kVA TX WILSON 1
94B 145630 CONNECTOR,IPC LV ABC 2
SSC/HVDE/ABC/500 S 105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
117J 222224 FUSE LINK,NH 400A X 415V CKB DIN-2 6
122A 33744 BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT 2
14E 323347 BLOCK,TRANS.STAND-OFF 50X50X5X80MM GAL 1
15A 323348 BRACKET,MOUNTING TRANSFORMER HANGING GAL 1
1A 323210 CROSSARM,WOOD 100 X 100 X 1830MM LONG 1
35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 12
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
47J 103008 CABLE,4CORE X 150MM2 X 0.6/1 XLPE 12
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
64E 236326 SWITCHING GROUP,400A LV 3P POLE MOUNT 2
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
74F 32224 BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT 2
75B 32274 BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT 3
75K 32285 BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT 1
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75R 32291 BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT 1
76C 32340 BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT 2
76D 32342 BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 4
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 12
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 6
82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 7
85B 50250 COACH SCREW,HEX HEAD 12MM X 100MM GAL 2
86A 65157 WASHER,FLAT ROUND M12 X 37MM GAL 2
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 12
86C 65159 WASHER,FLAT ROUND M20 X 60MM GAL 7
87E 65617 WASHER,FLAT ROUND M20 X 37MM GAL 2
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 5
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 3
51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 12
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
123A 72222 CONCRETE MIX,RAPID SET 20KG BAG 1
35Q 141346 LUG,CRIMP TERMINAL M10 X 10MM2 COPPER 3
36F 145661 LUG,CRIMP 150MM2 X M13 HOLE INS. BI-METL 16
62E 144617 COVER,INSULATOR PROTECT 11KV X112MM POLY 3 (or AR)
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY AR
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 3
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 3 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3 (or AR)
119G 225773 SURGE DIVERTER,OD 10KA X 22KV AR
15E 323453 BRACKET, Conversion 100-500kVA TX WILSON 1
94B 145630 CONNECTOR,IPC LV ABC 2

Pole Substations / Transformers Page 6-25

Overhead Distribution Construction Standard Section 6

6.6 SWER Transformers

6.6.1 Bolted Open Wire LV

Pole Substations / Transformers Page 6-26

Overhead Distribution Construction Standard Section 6

Bolted Open Wire LV - Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/12.7/1 S 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 4
with EDO 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
(excl t ransf ormer, eart hing, HV f use 51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 3
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 2
element s, t op HV const ., LV const .) 63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 1
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 1
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 1 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 1

Pole Substations / Transformers Page 6-27

Overhead Distribution Construction Standard Section 6

6.6.2 SWER Isolation Transformer

Pole Substations / Transformers Page 6-28

Overhead Distribution Construction Standard Section 6

SWER Isolation Transformer - Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
SSB/12.7/1 S 35P 141299 LUG,BOLTED TERMINAL M12 X 16MM2 CU 4
with EDO 36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 4
(excl transformer, earthing, HV fuse 51E 103217 CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 V75 3
41B 157877 SLEEVING,ELECT INSUL POLY 6MM X 30M BLK 2
elements, top HV const., LV const.) 63M 236323 FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN 1
64A 236243 SWITCHING GROUP,630A/660V X 1P CA MOUNT 1
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
76B 32338 BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 4
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 4
88B 66413 WASHER,FLAT ROUND M16 X 30 X 5MM GAL 1
55A 146809 CLAMP,LIVE LINE RING FITTING M12 - B24T 1
55B 146601 CONNECTOR,TEE STC 6.0-19.00MM CONDUCT 1 (or AR)
55C 146618 CONNECTOR,TEE STC 7.5-16.25MM CONDUCT AR
62F 144620 COVER,INSULATOR PROTECT 22KV X133MM POLY 1

Pole Substations / Transformers Page 6-29

Overhead Distribution Construction Standard Section 6

6.7 LV / LV Isolating Transformer

6.7.1 LV / LV Open Mains Cross Arm Hung Isolation Transformer

Pole Substations / Transformers Page 6-30

Overhead Distribution Construction Standard Section 6

6.8 Pole Transformer HV & LV Bridging & Fixing Arrangements

6.8.1 HV Bridging for Substation with Remote HV Fusing

Pole Substations / Transformers Page 6-31

Overhead Distribution Construction Standard Section 6

6.8.2 HV Surge Diverters Mounted on Transformers 100 kVA & Above

Pole Substations / Transformers Page 6-32

Overhead Distribution Construction Standard Section 6

6.8.3 Bridging from DO to TX Terminals

Pole Substations / Transformers Page 6-33

Overhead Distribution Construction Standard Section 6

6.8.4 LV Open Wire Bridging Arrangements

Pole Substations / Transformers Page 6-34

Overhead Distribution Construction Standard Section 6

6.8.5 LVABC Bridging Arrangements

Pole Substations / Transformers Page 6-35

Overhead Distribution Construction Standard Section 6

6.8.6 Pole Transformer LV Fuse Selection

LV FUSE RATING
TRANSFORMER
(AMPS)
(kVA)
1 X 250V 2 X 250V
10.1PH 63 63
15.1PH 80 63
25.1PH 124 63
50.1PH *250 125
10.3PH 63
15.3PH 63
25.3PH 63
50.3PH 80
100.3PH 160
200.3PH 315
300.3PH *450

FUSE LV FUSE RATING

S.I. No.
TYPE & SIZE (AMPS)
NH-00 63 22.22.07
NH-00 80 22.22.08
NH-00 100 22.22.09
NH-00 125 22.22.10
NH-00 160 22.22.11
NH-2 160 22.22.21
NH-2 250 22.22.22
NH-2 315 22.22.23
NH-2 400 22.22.24
OTKF 250 22.26.89
OTKF 450 22.28.20

Pole Substations / Transformers Page 6-36

Overhead Distribution Construction Standard Section 6

6.9 Transformer Steelwork Components

6.9.1 Transformer Mounting Washer Details

Pole Substations / Transformers Page 6-37

Overhead Distribution Construction Standard Section 6

6.9.2 Mounting Bracket for 100 – 500 kVA Transformers on Wood / Concrete poles

Pole Substations / Transformers Page 6-38

Overhead Distribution Construction Standard Section 6

6.9.3 Poletop Steelwork Details

Pole Substations / Transformers Page 6-39

Overhead Distribution Construction Standard Section 6

6.9.4 Bolt on Crossarm Bracket for 100 kVA and above Transformers

Pole Substations / Transformers Page 6-40

Overhead Distribution Construction Standard Section 6

6.9.5 Transformer Platform Bracket

Pole Substations / Transformers Page 6-41

Overhead Distribution Construction Standard Section 6

6.9.6 Transformer Clamping Plate

Pole Substations / Transformers Page 6-42

Overhead Distribution Construction Standard Section 6

6.9.7 Poletop Steelwork Details

Pole Substations / Transformers Page 6-43

Overhead Distribution Construction Standard Section 6

6.9.8 Poletop Steelwork Details

Pole Substations / Transformers Page 6-44

Overhead Distribution Construction Standard Section 7

7 SECTION 7 – OTHER POLE MOUNTED PLANT &

ATTACHMENTS

7 SECTION 7 – OTHER POLE MOUNTED PLANT & ATTACHMENTS ........................................................ 1

7.1 100A HV Voltage Regulator Type VR-32 – Pole Mounted ........................................................ 2
7.2 200A Voltage Regulator Type VR-32 – Platform Mounted ...................................................... 4
7.3 HV Voltage Regulator Schematic, Earthing & Operational Signs ............................................. 6
7.4 200A HV Voltage Regulator Steel Work .................................................................................... 7
7.5 ABB Pole Mounted Capacitor Bank ......................................................................................... 14
7.6 Line Fault Indicator Tracker LT30............................................................................................. 24
7.7 Crossarm Installation ................................................................................................................ 30
7.8 HV Metering Unit ...................................................................................................................... 31
7.9 ABB Metering Unit with HV Earth Only ................................................................................... 34
7.10 General Positioning of Attachments at Pole Base .................................................................. 36
7.11 Signs - Pole Attachment ........................................................................................................... 38
7.12 Pole Attachments ..................................................................................................................... 39
7.13 Bird Perches .............................................................................................................................. 42
SECTION 7A – UNDERGROUND (UG) CABLE TERMINATIONS ON POLES ............................................. 44
7.14 LV UG Cable Termination on Pole............................................................................................ 44
7.15 11kV or 22kV UG Cable Termination on Pole ......................................................................... 47
11kV or 22kV UG Cable Termination on Pole – Materials List ........................................................ 48
11kV or 22kV UG Cable Termination on Pole – Materials List ........................................................ 49
7.16 11kV or 22kV UG Cable Termination on Pole with Links ........................................................ 50
11kV or 22kV UG Cable Termination on Pole with Links – Materials List ...................................... 51
7.17 11kV or 22kV UG Cable Termination on Pole with Load Break Switch .................................. 52
7.18 11kV or 22kV UG Cable Termination on Pole with Vertical ABS ............................................ 53
7.19 11kV or 22kV UG Cable Termination on Pole – Surge Arrestors on Crossarms
(Obsolete)................................................................................................................................. 54
7.20 11kV or 22kV UG Cable Box Type Termination on Pole (Obsolete) ....................................... 55

For Streetlight Brackets Refer to the Public Lighting Manual

Other Pole Mounted Plant Page 7-1

Overhead Distribution Construction Standard Section 7

7.1 100A HV Voltage Regulator Type VR-32 – Pole Mounted

Other Pole Mounted Plant Page 7-2

Overhead Distribution Construction Standard Section 7

100A Voltage Regulator - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
REG100/COOPERX2/3PLM S 4 323311 L Bracket Mk11 1
(includes X-arms, excludes 5 323312 Spacing Plate Mk12 12
pole, regulators, ABSs, HVABC) 20 323363 Transposition Bracket 2
89 66803 Washer 75 x 75 x 6 (M20 Hole) 2
15D 323461 Regulator Mounting Bracket 1
1D 323304 Crossarm Mk4 5
1E 323305 Crossarm Mk5 2
2B 323317 Crossarm Strap Mk17 2
35E 141363 Lug Crimp 70mm2 tinned copper 24
36C 141304 Q LUG bolted 50 70mm2 tinned copper 9
36E 141306 Q LUG bolted 120 150mm2 tinned copper 7
48B 101621 Conductor AAC - 19/3.25 (Neptune) 18
51P 94184 Wire Electrical Cu 70mm2 1c Black 30
53H 146440 Cond Term Hel 19/3.25 AAC 12
54F 146510 Top Tie Helical 19/3.25 unarmoured 3
55C 146618 Dee Clamp for 7.5-16.25mm Dia AL ACSR/GZ (19/2.00 Cu Tail) - 355mm Long 6
55D 144950 Parallel groove clamp (7.0-16.3mm Al) 6
55E 144955 Parallel groove clamp (7.5-17.5mm Bi metal) 6
55H 146856 Split Bolt C (up to 19/.083) 10
55L 225798 Tee Clamp AL TCDA19 6
59A 322721 Pin,Insulator 22kV 15
60E 320531 Insulator Pin 22/450 15
60G 321260 Insulator Disc Porcelain 16mm 70kN 146mm 24
61A 322056 Ball Clevis & Pin 16mm 12
61B 322386 Socket Termination 16mm 12
61D 322090 Kink Pin 16mm 12
62F 144620 Bushing Cover 22kV 6
75P 32289 Bolt Hex M16 X 375 8
75R 32291 Bolt Hex M16 X 425 12
75T 32293 Bolt Hex M16 X 475 6
77B 33771 Bolt Tower M12 X 35 10
82A 40441 Nut M16 52
82B 40442 Nut M20 8
86B 65158 Washer Els 16 26
88A 66412 Washer Tower 12 10
32348 Bolt Hex M20 x 600 4
2A 323314 Crossarm Strap Mk14 10
119F 225772 Surge Arrester 11kV with cap 6 (or AR)
119G 225773 Surge Arrester 11kV with cap 6 (or AR)

Other Pole Mounted Plant Page 7-3

Overhead Distribution Construction Manual Section 7

7.2 200A Voltage Regulator Type VR-32 – Platform Mounted

Other Pole Mounted Plant Page 7-4

Overhead Distribution Construction Standard Section 7

200A Voltage Regulator - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
REG200/COOPERX2/3PLM S 4 323311 L Bracket Mk11 1
(includes X-arms, excludes 5 323312 Spacing Plate Mk12 6
pole, regulators, ABSs, HVABC) 20 323363 Transposition Bracket 2
15C 323349 V Bracket Mk49 2
16C 323351 T/F Crossmember Mk51 7
16D 323352 T/F Prop Lh Mk52 2
16E 323353 T/F Prop Rh Mk53 2
16F 323377 T/F Guide Mk77 4
1D 323304 Crossarm Mk4 5
1E 323305 Crossarm Mk5 2
2B 323317 Crossarm Strap Mk17 2
35E 141363 Lug Crimp 70mm2 tinned copper 24
36C 141304 Q LUG bolted 50 70mm2 tinned copper 9
36E 141306 Q LUG bolted 120 150mm2 tinned copper 7
48B 101621 Conductor AAC - 19/3.25 (Neptune) 18
51P 94184 Wire Electrical Cu 70mm2 1c Black 30
53H 146440 Cond Term Hel 19/3.25 AAC 12
54F 146510 Top Tie Helical 19/3.25 unarmoured 3

55C 146618 Dee Clamp for 7.5-16.25mm Dia AL ACSR/GZ (19/2.00 Cu Tail) - 355mm Long 6
55D 144950 Parallel groove clamp (7.0-16.3mm Al) 6
55E 144955 Parallel groove clamp (7.5-17.5mm Bi metal) 6
55H 146856 Split Bolt C (up to 19/.083) 10
55L 225798 Tee Clamp AL TCDA19 6
59A 322721 Pin,Insulator 22kV 15
60E 320531 Insulator Pin 22/450 15
60G 321260 Insulator Disc Porcelain 16mm 70kN 146mm 24
61A 322056 Ball Clevis & Pin 16mm 12
61B 322386 Socket Termination 16mm 12
61D 322090 Kink Pin 16mm 12
62F 144620 Bushing Cover 22kV 6
75P 32289 Bolt Hex M16 X 375 8
75R 32291 Bolt Hex M16 X 425 12
75T 32293 Bolt Hex M16 X 475 6
77B 33771 Bolt Tower M12 X 35 10
82A 40441 Nut M16 52
82B 40442 Nut M20 8
86B 65158 Washer Els 16 26
88A 66412 Washer Tower 12 10
2A 323314 Crossarm Strap Mk14 10
119F 225772 Surge Arrester 11kV with cap 6 (or AR)
119G 225773 Surge Arrester 22kV with cap 6 (or AR)

Other Pole Mounted Plant Page 7-5

Overhead Distribution Construction Standard Section 7

7.3 HV Voltage Regulator Schematic, Earthing & Operational Signs

Other Pole Mounted Plant Page 7-6

Overhead Distribution Construction Standard Section 7

7.4 200A HV Voltage Regulator Steel Work

7.4.1 H-Structure

Other Pole Mounted Plant Page 7-7

Overhead Distribution Construction Standard Section 7

7.4.2 Control Cubicle Mounting

Other Pole Mounted Plant Page 7-8

Overhead Distribution Construction Standard Section 7

7.4.3 Mounting Bracket & Back Plate

Other Pole Mounted Plant Page 7-9

Overhead Distribution Construction Standard Section 7

7.4.4 Clamping Bar & Bracket

Other Pole Mounted Plant Page 7-10

Overhead Distribution Construction Standard Section 7

7.4.5 Clamping Bar & Bracket Arrangement

Other Pole Mounted Plant Page 7-11

Overhead Distribution Construction Standard Section 7

7.4.6 Assembly Details – Clamping Bar & Bracket

Other Pole Mounted Plant Page 7-12

Overhead Distribution Construction Standard Section 7

7.4.7 Assembly Details – Cubicle Mounting Bracket

Other Pole Mounted Plant Page 7-13

Overhead Distribution Construction Standard Section 7

7.5 ABB Pole Mounted Capacitor Bank

7.5.1 General Arrangement

Other Pole Mounted Plant Page 7-14

Overhead Distribution Construction Standard Section 7

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
S

Other Pole Mounted Plant Page 7-15

Overhead Distribution Construction Standard Section 7

7.5.2 HV & LV Earthing Diagram

Other Pole Mounted Plant Page 7-16

Overhead Distribution Construction Standard Section 7

7.5.3 Single Phase Supply Arrangement

Other Pole Mounted Plant Page 7-17

Overhead Distribution Construction Standard Section 7

7.5.4 Wiring Layout

Other Pole Mounted Plant Page 7-18

Overhead Distribution Construction Standard Section 7

7.5.5 Schematic Diagram

Other Pole Mounted Plant Page 7-19

Overhead Distribution Construction Standard Section 7

7.5.6 Secondary Circuit Schematic

Other Pole Mounted Plant Page 7-20

Overhead Distribution Construction Standard Section 7

7.5.7 Earthing Circuit Schematic

Other Pole Mounted Plant Page 7-21

Overhead Distribution Construction Standard Section 7

7.5.8 Operational Earthing Layout

Other Pole Mounted Plant Page 7-22

Overhead Distribution Construction Standard Section 7

7.5.9 Steel Work Details

Other Pole Mounted Plant Page 7-23

Overhead Distribution Construction Standard Section 7

7.6 Line Fault Indicator Tracker LT30

7.6.1 Line Tracker LT30

Other Pole Mounted Plant Page 7-24

Overhead Distribution Construction Standard Section 7

7.6.2 Line Tracker LT30 Specification

LINE TRACKER LT30 PRODUCT SPECIFICATIONS

OVERHEAD SYSTEM 3 OR 2 WIRE, SINGLE EARTH, SWER

LINE VOLTAGE 5 - 66kV (FOR VOLTAGE > 66kV, CONTACT CHK)
LOAD SENSING CURRENT 25 AMPS - 1000A (WITH TYPICAL MOUNTING ARRANGEMENT
FAULT CURRENT SENSING 5 AMPS - 25000 AMPS FOR EARTH FAULT
25 AMPS - 25000 AMPS FOR PHASE TO PHASE FAULT
TRIGGER PRINCIPLE 100% INCREASE OVER PRIOR LOAD "HISTORY", FAULT TYPE DETERMINED
BY POST FAULT VOLTAGE STATUS. RATIO BASED DISCRIMINATION
FOR INRUSH CURRENTS
FAULT SENSING TIME TWO CYCLE AFTER FAULT ONSET (40MSEC @50Hz, 33.3MSEC @60Hz)
No. OF EVENTS RECORDED 15 (LAST 10 PERMANENT/TRANSIENT FAULTS AND LAST 5
SELF CLEARING FAULTS
DETAILS STORED PER EVENT TYPE, VOLTAGE WITH TIME STAMP (VALID FOR 12 MONTHS)
MAGNETIC FIELD RATIOS
POWER SOURCE SINGLE ARRAY OF MONOCRYSTALLINE CELLS
ENERGY STORAGE 2 x 2V 2.5Ah GEP CYCLON CELLS. XENON CAPACITY
WITHOUT INPUT FROM SOLAR CELLS IS 5 FAULTS (4 HOUR RESET)
THEN CONTINUING LED INDICATION
LIGHT SOURCE SINGLE XENON FLASH TUBE. TWO HIGH INTENSITY LED'S
RED AND AMBER
FLASH RATES XENON TUBE PERMANENT FAULT: 1 FLASH EVERY 4 SECONDS IN SUNLIGHT
1 FLASH EVERY 8 SECONDS AT NIGHT
LED 2 OR 6 MULTIPLE FLASH/BURST/MINUTE
(REFER TABLE D-OHC-G025-SD-001)
VISIBILITY XENON TUBE 150M IN DAYLIGHT
1KM AT NIGHT
LED 20M WHEN VIEWED FROM UNDERNEATH
INDICATOR RESET XENON TUBE - VOLTAGE RETURN (PERMANENT FAULTS ONLY), TIME OR LTC30 - TIME:
4 HOURS (DEFAULT) 0,2,4 OR 8 HOURS PROGRAMMABLE)

LED - VOLTAGE RETURN (PERMANENT FAULTS ONLY), TIME - TIME:

2,4,8,12,24 HOURS, THEN 2-7 DAYS, ALL FAULTS
OPERATING TEMPERATURE RANGE CASE SURFACE TEMPERATURE: 10°C TO +80°C
AMBIENT: -10°C TO +50°C
MATERIALS HOUSING, FOAMED LURAN S
DIMENSIONS 285(W)x203(H)x167(D) (MOUNTING BRACKET)
WEIGHT 3KG SHIPPED

Other Pole Mounted Plant Page 7-25

Overhead Distribution Construction Standard Section 7

7.6.3 Remote Controller Specification

POWER SOURCE INTERNAL RECHARGEABLE BATTERIES

DISPLAY BACKLIT LCD 16 CHARACTER x 2 LINE
KEYBOARD 12 BUTTON KEYPAD
BASIC FUNCTIONS CALENDER CLOCK DISPLAY
No. OF RECORDED EVENTS AVAILABLE LAST 15 FAULTS PER LT30, TOTAL STORAGE FOR 16 LT30'S
EVENT DETAILS DISPLAYED TIME, MAGNETIC FIELD RATIO, VOLTAGE STATUS
LINETRACKER DETAILS DISPLAY/REPROGRAM UNIT IDENTIFICATION EG. POLE ID, GPS LOCATION
LINETRACKER CONFIGURATION ACTIVATE NULLING METER FUNCTION
RESET INDICATORS, CHANGE RESET TIMES,
RESET UNIT (RE-INSTALLATION)
ACTIVATE POWER-DOWN (STORAGE MODE)

Other Pole Mounted Plant Page 7-26

Overhead Distribution Construction Standard Section 7

7.6.4 Site Selection & Installation

LINE VOLTAGE SEPARATION

11kV 25m
22kV 35m
33kV 50m

Other Pole Mounted Plant Page 7-27

Overhead Distribution Construction Standard Section 7

Site Selection & Installation

STATUS LED (AMBER LED)

BURST TYPE LINE CONDITION NOTES
1 FLASH EVERY 30 SECONDS VOLTAGE AND CURRENT SENSED LINE NORMAL
2 FLASHES EVERY 30 SECONDS VOLTAGE ONLY SENSED LT30 CANNOT SENSE ANY LINE
CURRENT. IF LINE CURRENT > 25 AMPS,
MOVE LT30 CLOSER TO CONDUCTORS
3 FLASHES EVERY 30 SECONDS VOLTAGE NOT SENSED LT30 CANNOT SENSE ANY ELECTRIC
FIELD. IF LINE IS ENERGISED, MOVE
MOVE LT30 CLOSER TO CONDUCTORS

Other Pole Mounted Plant Page 7-28

Overhead Distribution Construction Standard Section 7

Site Selection & Installation

Other Pole Mounted Plant Page 7-29

Overhead Distribution Construction Standard Section 7

7.7 Crossarm Installation

Other Pole Mounted Plant Page 7-30

Overhead Distribution Construction Standard Section 7

7.8 HV Metering Unit

7.8.1 Separate HV & LV Earths

Other Pole Mounted Plant Page 7-31

Overhead Distribution Construction Standard Section 7

HV Metering Unit – Separate Earths - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
MET/11/3 S 75N 32288 Bolt Hex M16 360 6
75P 32289 Bolt Hex M16 375 1
75T 32283 Bolt Hex M16 475 1
75Z 32261 Bolt Hex M16 45 4
82A 40441 Nut M16 4
86B 65158 Washer ELS 16 7
88B 66413 Washer Tower 16 4
62E 144617 Bushing Cover 11kV 6
37 152723 Conduit Rigid 20mm 2
13J 154542 Saddle 20mm 9
60E 320531 Insulator PIB 22/450 6
60G 321260 Insulator Disc 6
61A 322056 Ball Clevis & Pin 6
61D 322090 Kink Pin 6
61B 322386 Socket Termination 6
59A 322721 Pin Insulator 22kV 6
1A 323210 Crossarm MK1 Wood at No1 Store 1
1D 323304 Crossarm MK4 1
1E 322305 Crossarm MK5 2
3 323310 Strain Plate MK10 2
2A 323314 Crossarm Strap MK15 8
20 323363 Transposition Bracket 1
MET/22/3 S 75M 32287 Bolt Hex M16 325 4
75N 32288 Bolt Hex M16 350 2
75P 32289 Bolt Hex M16 375 2
75T 32293 Bolt Hex M16 475 1
75Z 32261 Bolt Hex M16 45 4
82A 40441 Nut M16 4
86B 65158 Washer ELS 16 6
88B 66413 Washer Tower 16 6
62F 144620 Bushing Cover 22kV 6
37 152723 Conduit Rigid 20mm 4
60E 320531 Insulator Pin 22/450 6
60G 321260 Insulator Disc 12
61A 322056 Ball Clevis & Pin 6
61D 322090 Kink Pin 6
61B 322386 Socket Termination 6
59A 322721 Pin Insulator 22kV 6
1A 323210 Crossarm MK1 Wood at No1 Store 1
1D 323304 Crossarm MK4 1
1E 322305 Crossarm MK5 2
3 323310 Strain Plate MK10 2
2A 323314 Crossarm Strap MK14 8
20 323363 Transposition Bracket 1
23B 323366 Conduit Clip MK66 15

Other Pole Mounted Plant Page 7-32

Overhead Distribution Construction Standard Section 7

7.8.2 Operating Procedure & Notes

Other Pole Mounted Plant Page 7-33

Overhead Distribution Construction Standard Section 7

7.9 ABB Metering Unit with HV Earth Only

7.9.1 Details

Other Pole Mounted Plant Page 7-34

Overhead Distribution Construction Standard Section 7

7.9.2 Operating Procedure & Notes

Other Pole Mounted Plant Page 7-35

Overhead Distribution Construction Standard Section 7

7.10 General Positioning of Attachments at Pole Base

Other Pole Mounted Plant Page 7-36

Overhead Distribution Construction Standard Section 7

General Arrangements Attachments at Pole Base

Other Pole Mounted Plant Page 7-37

Overhead Distribution Construction Standard Section 7

7.11 Signs - Pole Attachment

Other Pole Mounted Plant Page 7-38

Overhead Distribution Construction Standard Section 7

7.12 Pole Attachments

7.12.1 Possum Guards

Other Pole Mounted Plant Page 7-39

Overhead Distribution Construction Standard Section 7

7.12.2 Banners on Wood Poles

Other Pole Mounted Plant Page 7-40

Overhead Distribution Construction Standard Section 7

Banners on Wood Poles

Other Pole Mounted Plant Page 7-41

Overhead Distribution Construction Standard Section 7

7.13 Bird Perches

7.13.1 Bird Perch on Wood Poles

Other Pole Mounted Plant Page 7-42

Overhead Distribution Construction Standard Section 7

7.13.2 Perch on Stobie Poles

Other Pole Mounted Plant Page 7-43

Overhead Distribution Construction Standard Section 7

SECTION 7A – UNDERGROUND (UG) CABLE

TERMINATIONS ON POLES
7.14 LV UG Cable Termination on Pole

Other Pole Mounted Plant Page 7-44

Overhead Distribution Construction Standard Section 7

LV UG Cable Termination on Pole – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
CTP/LV/185X4 S 82C 40440 Nut M12 4
87C 65615 Washer Ns 12 8
#N/A 95120 Cable LV Cu 1c 120mm2 c x pvc (Black) 8
141198 Splice Crimp Bimetal 185al/120cu 4c solid Sector/Round 4
168085 Breakout Boot 4 Way 185 to 400mm2 LV 1
168420 Cable Sleeve MWTM 25/8 1200mm (Med Wall Mastic) 4
169150 Cable Sleeve Thin Walled Unlined (38-19mm) - RED 1
169151 Cable Sleeve Thin Walled Unlined (38-19mm) - WHITE 1
169152 Cable Sleeve Thin Walled Unlined (38-19mm) - BLUE 1
169153 Cable Sleeve Thin Walled Unlined (38-19mm) - BLACK 1
74K 32212 Bolt Hex M12 X 50 4
CTP/LV/240X4 S 82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 8
#N/A 141197 SPLICE,SL CRIMP LINK 240/150MM2 BI-METAL 4
168085 INSULATION,BREAKOUT 4 WAY 400 X 185MM2 1
168745 INSULATION,H/SHRINK WCSM 51 - 16MM BK 4
169150 INSULATION,H/SHRINK XLP 38 - 19MM RED 1
169151 INSULATION,H/SHRINK XLP 38 - 19MM WHITE 1
169152 INSULATION,H/SHRINK XLP 38 - 19MM BLUE 1
169153 INSULATION,H/SHRINK XLP 38 - 19MM BLACK 1
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 4
51S 94195 WIRE,BLDNG 150MM2 X 37/2.25 XLPE BLACK 8
CTP/LV/300X4 S 82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 8
#N/A 95185 CABLE,1CORE X 185MM2 DBL INS XLPE CU BLK 8
141192 SPLICE,CRIMP LINK 300/185MM2 BI-METAL 4
168085 INSULATION,BREAKOUT 4 WAY 400 X 185MM2 1
168745 INSULATION,H/SHRINK WCSM 51 - 16MM BK 4
169150 INSULATION,H/SHRINK XLP 38 - 19MM RED 1
169151 INSULATION,H/SHRINK XLP 38 - 19MM WHITE 1
169152 INSULATION,H/SHRINK XLP 38 - 19MM BLUE 1
169153 INSULATION,H/SHRINK XLP 38 - 19MM BLACK 1
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 4
CTP/LV/400X4 S 82C 40440 NUT,HEX M12 THREAD GALANISED STEEL 4
87C 65615 WASHER,FLAT ROUND M12 X 28MM GAL 8
#N/A 95240 CABLE,1CORE X 240MM2 DBL INS XLPE CU BLK 8
141199 SPLICE,CRIMP LINK 400/240MM2 BI-METAL 4
168085 INSULATION,BREAKOUT 4 WAY 400 X 185MM2 1
168745 INSULATION,H/SHRINK WCSM 51 - 16MM BK 4
169150 INSULATION,H/SHRINK XLP 38 - 19MM RED 1
169151 INSULATION,H/SHRINK XLP 38 - 19MM WHITE 1
169152 INSULATION,H/SHRINK XLP 38 - 19MM BLUE 1
169153 INSULATION,H/SHRINK XLP 38 - 19MM BLACK 1
74K 32212 BOLT,HEX HEAD M12 X 50MM GAL. C/W NUT 4

Other Pole Mounted Plant Page 7-45

Overhead Distribution Construction Standard Section 7

LV UG Cable Termination on Pole – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
CABLEGRD/LV/185X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 1
13F 323374 SADDLE,FULL 50 X 3MM 2-H 45MM CABLE GAL 3
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 12
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3
CABLEGRD/LV/240X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 1
13E 323342 SADDLE,FULL 50 X 3MM 2-H 60MM CABLE GAL 3
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 12
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3
CABLEGRD/LV/300X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 1
13D 323341 SADDLE,FULL 50 X 3MM 2-H 65MM CABLE GAL 3
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 12
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3
CABLEGRD/LV/400X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 1
13C 323340 SADDLE,FULL 50 X 3MM 2-H 75MM CABLE GAL 3
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 2
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 12
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3

Other Pole Mounted Plant Page 7-46

Overhead Distribution Construction Standard Section 7

7.15 11kV or 22kV UG Cable Termination on Pole

Other Pole Mounted Plant Page 7-47

Overhead Distribution Construction Standard Section 7

11kV or 22kV UG Cable Termination on Pole – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
CPA/11/3/PLM S 119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
141358 LUG,CRIMP TERMINAL M10 X 35MM2 COPPER 3
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3

CPA/11/3/PLM S 119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3

55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 3
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 3
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
141358 LUG,CRIMP TERMINAL M10 X 35MM2 COPPER 3
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3

Other Pole Mounted Plant Page 7-48

Overhead Distribution Construction Standard Section 7

11kV or 22kV UG Cable Termination on Pole – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
CABLEGRD/11/185X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 2
13C 323340 SADDLE,FULL 50 X 3MM 2-H 75MM CABLE GAL 4
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 16
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3
CABLEGRD/11/240X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 2
13B 323339 SADDLE,FULL 50 X 3MM 2-H 80MM CABLE GAL 4
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 16
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3
CABLEGRD/22/185X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 2
13B 323339 SADDLE,FULL 50 X 3MM 2-H 80MM CABLE GAL 4
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 16
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3
CABLEGRD/22/240X S 10A 323326 PROTECTOR,CABLE-WOOD POLE 3400MM ALUM 1
12B 323371 BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL 2
13A 323338 SADDLE,FULL 50 X 3MM 2-H 90MM CABLE GAL 4
84A 50225 COACH SCREW,HEX HEAD 10MM X 50MM GAL 4
87B 65614 WASHER,FLAT ROUND M10 X 21MM GAL 16
#N/A 323333 SADDLE PLATE,M12 C/SCREWS 2 X M12 STUDS 3

Other Pole Mounted Plant Page 7-49

Overhead Distribution Construction Standard Section 7

7.16 11kV or 22kV UG Cable Termination on Pole with Links

Other Pole Mounted Plant Page 7-50

Overhead Distribution Construction Standard Section 7

11kV or 22kV UG Cable Termination on Pole with Links – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
CPLA/11/3/PLM S 1G 323309 CROSSARM,STEEL 75 X 75 X 2210MM GAL 2
119F 225772 SURGE DIVERTER,OD 10KA X 11KV 3
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 12
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 12
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
141358 LUG,CRIMP TERMINAL M10 X 35MM2 COPPER 3
157891 SLEEVING,ELECT INSUL S/T 20MM X 7.6M GRY 0.2
236088 SWITCHING GROUP,24KV X 1P VERTICAL NO-AD 3
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4
d S 1G 323309 CROSSARM,STEEL 75 X 75 X 2210MM GAL 2
119G 225773 SURGE DIVERTER,OD 10KA X 22KV 3
2B 323317 BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL 2
59A 322721 PIN,INSULATOR 20MM DIA X 22KV GAL STEEL 1
60E 320531 INSULATOR,PIN 22KV AERO PORCELAIN 1
60H 320735 INSULATOR,STANDOFF 24KV 305MM POLYMERIC 1
6A 323315 BRACKET,INSULATOR 50 X 6MM C/W BRACE 1
73F 32191 BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT 3
75N 32288 BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT 4
75P 32289 BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT 2
77B 33771 BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT 12
86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 6
88A 66412 WASHER,FLAT ROUND M12 X 24MM GAL 12
9C 322063 BRACKET,INSULATOR STAND-OFF 50X50X900MM 1
#N/A 40439 NUT,HEX M10 THREAD GALANISED STEEL 6
141358 LUG,CRIMP TERMINAL M10 X 35MM2 COPPER 3
157891 SLEEVING,ELECT INSUL S/T 20MM X 7.6M GRY 0.2
236088 SWITCHING GROUP,24KV X 1P VERTICAL NO-AD 3
303569 SECTION,COPPER SDT T-BAR 80 X 6MM T/P 3
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 4

Other Pole Mounted Plant Page 7-51

Overhead Distribution Construction Standard Section 7

7.17 11kV or 22kV UG Cable Termination on Pole with Load Break Switch

Other Pole Mounted Plant Page 7-52

Overhead Distribution Construction Standard Section 7

7.18 11kV or 22kV UG Cable Termination on Pole with Vertical ABS

Other Pole Mounted Plant Page 7-53

Overhead Distribution Construction Standard Section 7

7.19 11kV or 22kV UG Cable Termination on Pole – Surge Arrestors on

Crossarms (Obsolete)

Other Pole Mounted Plant Page 7-54

Overhead Distribution Construction Standard Section 7

7.20 11kV or 22kV UG Cable Box Type Termination on Pole (Obsolete)

Other Pole Mounted Plant Page 7-55

Overhead Distribution Construction Standard Section 7

Other Pole Mounted Plant Page 7-56

Overhead Distribution Construction Standard Section 8

8 SECTION 8 – COMMUNICATIONS

8 SECTION 8 – COMMUNICATIONS ......................................................................................................... 1

8.1 Pilot Cable – Intermediate – Wood Pole ................................................................................... 2
8.2 Pilot Cable – Small Angle – Wood Pole...................................................................................... 4
8.3 Pilot Cable – Dead End & Strain – Wood Pole........................................................................... 6
8.4 Pilot Cable – Junction Box & Notes – Wood Pole ..................................................................... 8
8.5 Pilot Cable – Intermediate – Steel / Concrete Pole ................................................................ 10
8.6 Pilot Cable – Limited Strain – Steel / Concrete Pole ............................................................... 12
8.7 Pilot Cable – Dead End & Full Strain –Steel / Concrete Pole .................................................. 14
8.8 Pilot Cable – Junction Box & Notes – Steel / Concrete ........................................................... 16
8.9 Pilot Cable Support Steelwork for Steel Poles ......................................................................... 18
8.10 Junction Box Mounting Plate Steelwork Details ..................................................................... 19
8.11 10 Pair Pilot Cable Junction Box Arrangements and Details .................................................. 20
8.12 Insulator Straps / Brackets ....................................................................................................... 22

Communications Page 8-1

Overhead Distribution Construction Standard Section 8

8.1 Pilot Cable – Intermediate – Wood Pole

Communications Page 8-2

Overhead Distribution Construction Standard Section 8

Pilot Cable – Intermediate – Wood Pole – Materials List

Store Stock
Unit Assembly Type Item Ref Item Stock Item Description Quantity
S 60C 321117 INSULATOR,STRAIN 80MM SHLV2 1
BOLT,HEX HEAD M16 X 300MM GAL. C/W
75L 32286 NUT 1

I/P/W 86B 65158 WASHER,FLAT ROUND M16 X 50MM GAL 2

82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 1

BRACKET,DOUBLE-ANGLE 40 X 5MM MK57
17D 323357 GAL 1
SIDE TIE,ARMOURED 3/3.75 SC/GZ
54J 146540 CONDUCTOR 1

Communications Page 8-3

Overhead Distribution Construction Standard Section 8

8.2 Pilot Cable – Small Angle – Wood Pole

Communications Page 8-4

Overhead Distribution Construction Standard Section 8

Pilot Cable – Small Angle – Wood Pole – Materials List

APL QTY ITEM STOCK DESCRIPTION

CODE
A/P/W 1 60C 321117 SHLV REEL INSULATOR
1 75L 32286 M16x300 BOLT
1 86B 65158 M16 ELS WASHER
2 82A 40441 M16 NUT
1 17D 323357 U.BRACKET 40x5x110
1 54J 146540 CONDUCTOR SIDE TIE, HELICAL 3/2.75

Communications Page 8-5

Overhead Distribution Construction Standard Section 8

8.3 Pilot Cable – Dead End & Strain – Wood Pole

Communications Page 8-6

Overhead Distribution Construction Standard Section 8

Pilot Cable – Dead End & Strain – Wood Pole – Materials List

Communications Page 8-7

Overhead Distribution Construction Standard Section 8

8.4 Pilot Cable – Junction Box & Notes – Wood Pole

Communications Page 8-8

Overhead Distribution Construction Standard Section 8

Pilot Cable – Junction Box & Notes – Wood Pole – Materials List

Communications Page 8-9

Overhead Distribution Construction Standard Section 8

8.5 Pilot Cable – Intermediate – Steel / Concrete Pole

Communications Page 8-10

Overhead Distribution Construction Standard Section 8

Pilot Cable – Intermediate – Steel / Concrete Pole – Materials List

Communications Page 8-11

Overhead Distribution Construction Standard Section 8

8.6 Pilot Cable – Limited Strain – Steel / Concrete Pole

Communications Page 8-12

Overhead Distribution Construction Standard Section 8

Pilot Cable – Limited Strain – Steel / Concrete Pole – Materials List

Communications Page 8-13

Overhead Distribution Construction Standard Section 8

8.7 Pilot Cable – Dead End & Full Strain –Steel / Concrete Pole

Communications Page 8-14

Overhead Distribution Construction Standard Section 8

Pilot Cable – Dead End & Full Strain – Steel / Concrete Pole – Materials List

Communications Page 8-15

Overhead Distribution Construction Standard Section 8

8.8 Pilot Cable – Junction Box & Notes – Steel / Concrete

Communications Page 8-16

Overhead Distribution Construction Standard Section 8

Pilot Cable – Junction Box & Notes – Steel / Concrete Pole – Materials List

APL QTY ITEM STOCK DESCRIPTION

CODE
JB/P/SC 4 75J 32284 M16x260 BOLT
4 82A 40441 M16 NUT
4 86B 65158 M16 WASHER ELS
1 59B INSULATOR PIN STALK
1 60E 320531 TYPE ALP 22kV PORCELAIN INSULATOR
1 54J 146540 CONDUCTOR SIDE TIE, HELICAL, 3/2.75
1 112D INSULATOR BRACKET FOR S/C POLE
1 60H 320735 STAND OFF INSULATOR 22kV
1 109B PC JUNCTION BOX
1 110 PC JUNCTION BOX MOUNTING BRACKET

Communications Page 8-17

Overhead Distribution Construction Standard Section 8

8.9 Pilot Cable Support Steelwork for Steel Poles

Communications Page 8-18

Overhead Distribution Construction Standard Section 8

8.10 Junction Box Mounting Plate Steelwork Details

Communications Page 8-19

Overhead Distribution Construction Standard Section 8

8.11 10 Pair Pilot Cable Junction Box Arrangements and Details

Communications Page 8-20

Overhead Distribution Construction Standard Section 8

Pair Pilot Cable Junction Box Arrangements and Details

Communications Page 8-21

Overhead Distribution Construction Standard Section 8

8.12 Insulator Straps / Brackets

Communications Page 8-22

Overhead Distribution Construction Standard Section 9

9 SECTION 9 – CONDUCTORS, CABLES, CONNECTORS &

ASSOCIATED FITTINGS

9 SECTION 9 – CONDUCTORS, CABLES, CONNECTORS & ASSOCIATED FITTINGS ................................. 1

9.1 Conductor and Cable Data ......................................................................................................... 2
9.2 Conductor Fittings Summary Table ........................................................................................... 9
9.3 Compression Sleeves / Splices ................................................................................................. 11
9.4 Wedge Connectors – AMPACT Connectors ............................................................................ 14
9.5 Parallel Groove Clamp Connectors .......................................................................................... 15
9.6 Split Bolt Clamp Connectors..................................................................................................... 17
9.7 Bolted Lugs ................................................................................................................................ 18
9.8 Compression (Crimp) Lugs ....................................................................................................... 19
9.9 Live Line Clamps........................................................................................................................ 21
9.10 IPC (Insulation Piercing Connectors) for LVABC ...................................................................... 22
9.11 Tee Clamps ................................................................................................................................ 24
9.12 Helical Terminations for Conductors ....................................................................................... 25
9.13 Helical Tie and Armour Rod Selection ..................................................................................... 26
9.14 Application of Helical Ties ........................................................................................................ 27
9.15 Conductor Tie Installation ........................................................................................................ 30
9.16 Midspan ‘Flying’ Bridging between Circuits – Open Crossings .............................................. 34
9.17 Conductor Spreaders ................................................................................................................ 35
9.18 Cable Drum Sizes ...................................................................................................................... 36

For details of Service Cables and associated fittings, refer to Section 1.

Conductors, Cables, Connectors & Associated Fittings Page 9-1

Overhead Distribution Construction Standard Section 9

9.1 Conductor and Cable Data

9.1.1 Bare Mains – Metric Sizes

Current Rating (A)

Conductor Stock Strands Nom.
Material CSA Mass
Name Code / Item No No./Dia. 2
(mm ) Diameter (kg/m)
(mm) (mm)
Summer Day Winter Night

AAC (1350) LEO 7/2.50 34.36 7.50 0.094 124 200

LIBRA 7/3.00 49.48 9.00 0.135 153 274
MARS 7/3.75 77.31 11.25 0.211 196 319
MERCURY 10.16.15 / 48A 7/4.50 111.30 13.50 0.304 239 441
NEPTUNE 10.16.21 / 48B 19/3.25 157.60 16.25 0.433 289 568
AAAC (1120) FLUORINE 10.16.10 / 49 7/3.00 49.48 9.00 0.135 150 186
ACSR/GZ ALMOND 6/1/2.50 34.36 7.50 0.119 115 251
APPLE 6/1/3.00 49.50 9.00 0.171 141 324
BANANA 6/1/3.75 77.31 11.30 0.268 181 448
CHERRY 6/4.75+7/1.60 120.40 14.30 0.402 235 56
RAISIN 3/4/2.50 34.36 7.50 0.195 90 111
SC/GZ 1.31GPa min. 43.89.12 3/2.75 17.82 5.93 0.140 33 151
Stay Wire 43.89.20 19/2.00 59.70 10.0 0.473 70 210
HDC 7/1.25 8.589 3.75 0.0769 104 269
(Hard Drawn 7/1.75 16.84 5.25 0.151 122 297
Copper)
7/2.00 21.99 6.00 0.197 184 413
19/1.75 45.70 8.75 0.413 214 529
19/2.00 59.70 10.00 0.538 305 200
19/2.75 112.90 13.80 1.020 124 274

Notes:
1. Conductors other than current preferred sizes are included for reference purposes.
2. Conductor data is generally in accordance with Australian Standards. Note that product from various manufacturers may differ slightly from the above data.
3. Current ratings are based on:
- a maximum conductor temperature of 50⁰C
- a wind speed normal to the conductor of 1.0m/s (3.6km/h)
- 30⁰C ambient for summer and 10⁰C ambient for winter
- daytime solar intensity of 1000W/m2 summer, albedo (ground reflectance) coefficient of 0.2
- bare conductor emissivity of 0.85, solar absorption coefficient of 0.85.

Conductors, Cables, Connectors & Associated Fittings Page 9-2

Overhead Distribution Construction Standard Section 9

9.1.2 Bare Mains – Imperial Sizes

Strands (No./Dia.) Current Rating (A)
Conductor Stock Nom.
Material CSA Mass
Name Code (mm2) Diameter (kg/m)
Metric Imperial (mm) Summer Day Winter Night
(mm) (in)

AAC (1350) LOCUST3 7/2.36 7/.093 30.71 7.08 0.0833 116 200
GRUB 7/3.00 7/.118 49.42 8.99 0.1350 154 274
FLY 7/3.40 7/.134 63.88 10.21 0.1741 176 319
WASP 7/4.39 7/.173 106.19 13.18 0.2902 233 441
HORNET 19/3.25 19/.128 157.74 16.26 0.4331 289 568
ACSR/GZ GOPHER 6/1/2.36 6/1/.093 30.64 7.08 0.1061 107 186
FERRET 6/1/3.00 6/1/.118 49.35 8.99 0.1711 141 251
MINK 6/1/3.66 6/1/.144 73.54 10.97 0.2545 177 324
DOG 6/4.72+7/1.57 6/.186+7/.062 118.70 14.17 0.3959 234 448
SC/GZ 85/95 TON 3/2.64 3/.104 16.45 5.69 0.1295 34 56
HDC 7/1.22 7/.048 8.07 3.66 0.0731 69 111
(Hard Drawn Copper) 7/1.63 7/.064 14.52 4.88 0.1295 91 151
7/2.03 7/.080 22.71 6.10 0.2024 123 210
7/2.46 7/.097 32.26 7.39 0.2986 155 269
19/1.63 19/.064 38.39 7.92 0.3438 169 297
19/2.11 19/.083 66.32 10.54 0.5953 226 413
19/2.57 19/.101 98.19 12.83 0.8810 281 529

Notes:
1. Conductors other than current preferred sizes are included for reference purposes.
2. Conductor data is generally in accordance with Australian Standards. Note that product from various manufacturers may differ slightly from the above data.
3. Current ratings are based on:
- a maximum conductor temperature of 50⁰C
- a wind speed normal to the conductor of 1.0m/s (3.6km/h)
- 30⁰C ambient for summer and 10⁰C ambient for winter
- daytime solar intensity of 1000W/m2 summer, albedo (ground reflectance) coefficient of 0.2
- bare conductor emissivity of 0.85, solar absorption coefficient of 0.85.
4. The conductor designation ‘Locust’ is sometimes also used to refer to the AAC size 19/.211”, i.e. 19/5.36.

Conductors, Cables, Connectors & Associated Fittings Page 9-3

Overhead Distribution Construction Standard Section 9

9.1.3 LVABC Mains

Nom. Min.
Nom. Bending
Nom. Core Nom.
No. of CSA Stock Overall Radius Current Rating (A)
Conductor Diameter Breaking Mass
Cores of Cores Code Cable (kg/m) (installed)
2
(mm ) Diameter Over Load
(mm) Diameter (kN) (mm)
Insulation (mm)
(mm) Core Cable Summer Day Winter Day
2 50 10.30.04 8.1 11.2 23.8 14.0 0.350 70 145 205 260
4 50 10.30.02 8.1 11.2 28.7 28.0 0.700 70 160 155 195
2 95 10.30.03 11.4 14.9 31.8 26.6 0.680 95 285 295 365
4 95 10.30.01 11.4 14.9 38.4 53.2 1.350 95 285 235 300
4 150 10.30.08 14.2 17.7 45.6 84.0 2.020 115 460 295 430

Notes:
1. Note that product from various manufacturers may differ slightly from the above data.
2. Current ratings assume a maximum conductor temperature of 75⁰C, wind speed normal to the conductor of 0.5m/s (1.8km/h), solar intensity of 1000W/m 2, summer ambient temperature of
30⁰C, winter ambient temperature of 10⁰C, solar absorption coefficient of 0.9 and emissivity coefficient of 0.95.
3. Neutral core has ribs all around. Please cores have either 1, 2 or 3 ribs.

Conductors, Cables, Connectors & Associated Fittings Page 9-4

Overhead Distribution Construction Standard Section 9

9.1.4 HVABC Mains

Min.
Nom. Nom. Bending Current Rating (A)
Nom. Nom. Overall
CSA Stock Core Overall Catenary Catenary Radius
Type Voltage Conductor Catenary Catenary Cable
of Cores Code Diameter Cable Material CSA Stranding (installed)
(mm2) Diameter Diameter (mm2) Mass
(mm) Diameter3 (mm)
No./Dia. (mm)
(kg/m) (mm)
(mm) (mm) Summer Day Winter Night
Core Cable
NMS 50 6.35/11 8.1 19 51.9 14.3 AAAC 124 7/4.75 1.41 285 795 160 210
Non-metallic Screened
35 12.7/22 10.30.50 6.9 23 58.3 14.3 AAAC 124 7/4.75 1.63 345 885 150 205
150 6.35/11 14.2 26 67.4 17.5 AAAC 182 19/3.50 2.68 390 1035 370 430
185 12.7/22 10.30.51 15.7 32 80.0 17.5 AAAC 182 19/3.50 3.64 480 1230 395 550
NMS 50 6.35/11 8.1 19 54.6 14.3 AAAC 124 7/4.75 1.53 300 550 147 192
Non-metallic Screened
with 1.2mm 35 12.7/22 14.91.11 6.9 23 61.0 14.3 AAAC 124 7/4.75 1.78 350 610 135 184
HDPE 150 6.35/11 14.2 26 70.1 17.5 AAAC 182 19/3.50 2.84 390 700 331 384
Outer Sheath 185 12.7/22 14.91.12 15.7 32 81.7 17.5 AAAC 182 19/3.50 3.76 480 820 354 491
MS 50 6.35/11 8.1 26.2 62.4 (57.4) 10.0 SC/GZ 59.7 19/2.00 2.82 390 620 160 210
Metallic Screened
35 12.7/22 6.9 28.4 62.7 (59.8) 6.0 SC/GZ 22.0 7/2.00 2.51 430 630 150 205
150 6.35/11 14.2 32.5 75.0 (70.0) 10.0 SC/GZ 59.7 19/2.00 4.67 490 750 370 430
185 12.7/22 15.7 39.1 88.2 (83.2) 10.0 SC/GZ 59.7 19/2.00 5.79 590 880 395 550

Notes:
1. All cables are 3-core with catenary. Cables other than current preferred sizes are included for reference purposes.
2. Note that product from various manufacturers may differ slightly from the above data.
3. Overall cable diameter figures shown in parentheses are projected diameter for wind loading.
4. NMSHVABC catenary 7/4.75 sometimes shown as 7/5.00 and 19/3.50 as 19/3.65.
5. Current ratings assume a wind speed normal to the conductor of 0.5m/s (1.8km/h), solar intensity of 1000W/m2, summer ambient temperature of 30⁰C, winter ambient temperature of 10⁰C,
solar absorption coefficient of 0.9 and emissivity coefficient of 0.95. The rating is based on a core temperature of 90⁰C and maximum catenary temperature of 50⁰C.

Conductors, Cables, Connectors & Associated Fittings Page 9-5

Overhead Distribution Construction Standard Section 9

9.1.5 Communications and Other Cables

Catenary/ Nom. Nom.

Stock Catenary
Type Name/Code Cable Overall Breaking Mass
Code Diameter (kg/m)
CSA (mm) Diameter Load
(mm2) (mm) (kN)

Pilot Cable 20 Pair + 7/1.75SC/GZ 21.99 5.29 42.0 26.0 1.31

10 Pair + 3/2.75SC/GZ 17.82 5.93 ~32 22.2 ~0.839
10 Pair + 7/2.75SC/GZ 41.58 8.25 ~35 50.1 ~0.977
ADSS (Optical Fibre) ADSS 72SM 124 12.5 28.0 0.12
ADSS 312 247.6 22.0 22.0 0.365
NBN Cable RPX 144F ribbon 114.9 15.2 8.6 0.095
SST 12F 31.5 8.1 4.0 0.031
ROC 1F drop 12.4 5.4 3.0 0.0148
Telephone (PSTN) Cable 10 Pair 5.94 2.75 14.89 7.39 0.134
30 Pair 8.59 3.31 25.95 10.69 0.435

Notes:
1. Cables other than current preferred sizes are included for reference purposes.
2. Note that product from various manufacturers may differ slightly from the above data.
3. Neutral core has ribs all around. Phase core have either 1,2 or 3 ribs.

Conductors, Cables, Connectors & Associated Fittings Page 9-6

Overhead Distribution Construction Standard Section 9

9.1.6 Conductor Settings – Selection Criteria

Conductors, Cables, Connectors & Associated Fittings Page 9-7

Overhead Distribution Construction Standard Section 9

Conductor Settings – Selection Criteria

Conductors, Cables, Connectors & Associated Fittings Page 9-8

Overhead Distribution Construction Standard Section 9

9.2 Conductor Fittings Summary Table

9.2.1 Bare Mains – Metric Sizes
Helical Compression Sleeves Helical Ties Compression
Conductor Strands Nom. Armour Rod
Material CSA Terminations Non-Tension Tension Top Side Lug M12
Name No./Dia. Diameter 2
(mm )
(mm) (mm)
Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No.
AAC (1350) LEO 7/2.50 7.50 34.36 53C 14.64.31 57A 146261 57E 146401 35F 152476
LIBRA 7/3.00 9.00 49.48 53D 14.64.71 ? ? ? ? 146508 146518 35G 152477
MARS 7/3.75 11.25 77.31 53F 14.64.35 57B 146262 57F 146402
MERCURY 7/4.50 13.50 111.30 53G 14.64.36 57C 146263 57G 146403 58D 145982 35H 152480
NEPTUNE 19/3.25 16.25 157.60 53H 14.64.40 57D 146265 57H 146405 146509 146522 58E 145985 35J 152491
AAAC (1120) FLUORINE 7/3.00 9.00 49.48 53D 14.64.71 ? ? ? ? 58B 146025 35G 152477
ACSR/GZ ALMOND 6/1/2.50 7.50 34.36 53K 14.64.70 57A 146261 57J 146411 58A 146017 35F 152476
APPLE 6/1/3.00 9.00 49.50 53D 14.64.71 ? ? ? ? 58B 146025 35G 152477
BANANA 6/1/3.75 11.30 77.31 ?? 14.64.72 57B 146262 ? ?
CHERRY 6/4.75+7/1.60 14.30 120.40 ?? 14.64.73 57C 146263 ? ? 35H 152480
RAISIN 3/4/2.50 7.50 34.36 53K 14.64.70 57A 146261 ? ? 58A 146017 35F 152476
SC/GZ 1.31GPa min. 3/2.75 5.93 17.82 53J 14.85.01 57A 146261 ? ? 146530 146540 58F 148411
Stay Wire 7/2.75 8.25 41.57 53Y 14.85.06
Stay Wire 19/2.00 10.0 59.70 53U 14.85.11
HDC 7/1.25 3.75 8.589
7/1.75 5.25 16.84 53P 14.82.32 57R 147734 35P 141299
7/2.00 6.00 21.99 53Q 14.82.34 57S 147736
19/1.75 8.75 45.70 ?? 14.82.38 57U 147738 35D 141361
19/2.00 10.00 59.70 53S 14.82.39 57V 147740 35E 141363
19/2.75 13.80 112.90 53T 14.82.40 57W 147739 35N 141371

Notes:
1. Conductors other than current preferred sizes are included for reference purposes.
2. Refer to section 9.4 for details of Aluminium Sleeves and Automatic Copper Splices. Tension splices/sleeves shall not be used within 2.5m of crossarms. Automatic copper
splices are not to be installed at or near midspan or on non-tensioned or slack conductors.

Conductors, Cables, Connectors & Associated Fittings Page 9-9

Overhead Distribution Construction Standard Section 9

9.2.2 Bare Mains – Imperial Sizes

Strands (No./Dia.) Helical Compression Sleeves Helical Ties Compression
Conductor Nom. Armour Rod
Material CSA Terminations Non-Tension Tension Top Side Lug M12
Name Metric Imperial Diameter (mm2)
(mm) (in) (mm)
Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No. Item S.I. No.
3
AAC (1350) LOCUST 7/2.36 7/.093 7.08 30.71 53C 14.64.31 57A 146261 57E 146401 35F 152476
GRUB 7/3.00 7/.118 8.99 49.42 53D 14.64.71 ? ? ? ? 146508 146518 35G 152477
FLY 7/3.40 7/.134 10.21 63.88 53E 14.64.34 57B 146262 57F 146402
WASP 7/4.39 7/.173 13.18 106.19 53G 14.64.36 57C 146263 57G 146403 58D 145982 35H 152480
HORNET 19/3.25 19/.128 16.26 157.74 53H 14.64.40 57D 146265 57H 146405 146509 146522 58E 145985 35J 152491
ACSR/GZ GOPHER 6/1/2.36 6/1/.093 7.08 30.64 53K 14.64.70 57A 146261 57J 146411 58A 146017 35F 152476
FERRET 6/1/3.00 6/1/.118 8.99 49.35 53D 14.64.71 ? ? ? ? 58B 146025 35G 152477
MINK 6/1/3.66 6/1/.144 10.97 73.54 ?? 14.64.72 57B 146262 ? ?
DOG 6/4.72+7/1.57 6/.186+7/.062 14.17 118.70 ?? 14.64.73 57C 146263 ? ? 35H 152480
SC/GZ 85/95 TON 3/2.64 3/.104 5.69 16.45 53J 14.85.01 57A 146261 ? ? 146530 146540 58F 148411
HDC 7/1.22 7/.048 3.66 8.07 57Q 147733 35P 141299
7/1.63 7/.064 4.88 14.52 53P 14.82.32 57R 147734
7/2.03 7/.080 6.10 22.71 53Q 14.82.34 57S 147736
7/2.46 7/.097 7.39 32.26 ?? 14.82.38 57T 147735
19/1.63 19/.064 7.92 38.39 ?? 14.82.38 57U 147738
19/2.11 19/.083 10.54 66.32 53S 14.82.39 57V 147740 35E 141363
19/2.57 19/.101 12.83 98.19 53T 14.82.40 57W 147739 `

Notes:
1. Conductors other than current preferred sizes are included for reference purposes.
2. Refer to section 9.4 for details of Aluminium Sleeves and Automatic Copper Splices. Tension splices/sleeves shall not be used within 2.5m of crossarms. Automatic copper
splices are not to be installed at or near midspan or on non-tensioned or slack conductors.

Conductors, Cables, Connectors & Associated Fittings Page 9-10

Overhead Distribution Construction Standard Section 9

9.3 Compression Sleeves / Splices

9.3.1 Compression Sleeve / Splice Aluminium Fittings

Conductors, Cables, Connectors & Associated Fittings Page 9-11

Overhead Distribution Construction Standard Section 9

9.3.2 Compression Sleeve / Splice Automatic Copper Splices (Obsolete)

Conductors, Cables, Connectors & Associated Fittings Page 9-12

Overhead Distribution Construction Standard Section 9

9.3.3 Compression Sleeve for HVABC Joins

Conductors, Cables, Connectors & Associated Fittings Page 9-13

Overhead Distribution Construction Standard Section 9

9.4 Wedge Connectors – AMPACT Connectors

Conductors, Cables, Connectors & Associated Fittings Page 9-14

Overhead Distribution Construction Standard Section 9

9.5 Parallel Groove Clamp Connectors

Conductors, Cables, Connectors & Associated Fittings Page 9-15

Overhead Distribution Construction Standard Section 9

Conductors, Cables, Connectors & Associated Fittings Page 9-16

Overhead Distribution Construction Standard Section 9

9.6 Split Bolt Clamp Connectors

Conductors, Cables, Connectors & Associated Fittings Page 9-17

Overhead Distribution Construction Standard Section 9

9.7 Bolted Lugs

Conductors, Cables, Connectors & Associated Fittings Page 9-18

Overhead Distribution Construction Standard Section 9

9.8 Compression (Crimp) Lugs

9.8.1 Compression – Crimp Lugs

Conductors, Cables, Connectors & Associated Fittings Page 9-19

Overhead Distribution Construction Standard Section 9

9.8.2 Compression – Crimp Lugs Used for conductors Used at ABS & HV Link Sites

Conductors, Cables, Connectors & Associated Fittings Page 9-20

Overhead Distribution Construction Standard Section 9

9.9 Live Line Clamps

Compression – Crimp Lugs Used for conductors Used at ABS & HV Link Sites

Conductors, Cables, Connectors & Associated Fittings Page 9-21

Overhead Distribution Construction Standard Section 9

9.10 IPC (Insulation Piercing Connectors) for LVABC

9.10.1 Compression – Crimp Lugs Used for conductors Used at ABS & HV Link Sites

Conductors, Cables, Connectors & Associated Fittings Page 9-22

Overhead Distribution Construction Standard Section 9

9.10.2 Aerial Bundled Conductor Service Mains – I.P.C.

Conductors, Cables, Connectors & Associated Fittings Page 9-23

Overhead Distribution Construction Standard Section 9

9.11 Tee Clamps

Conductors, Cables, Connectors & Associated Fittings Page 9-24

Overhead Distribution Construction Standard Section 9

9.12 Helical Terminations for Conductors

Conductors, Cables, Connectors & Associated Fittings Page 9-25

Overhead Distribution Construction Standard Section 9

9.13 Helical Tie and Armour Rod Selection

Conductors, Cables, Connectors & Associated Fittings Page 9-26

Overhead Distribution Construction Standard Section 9

9.14 Application of Helical Ties

Conductor Attachments – Application of Helical Ties

HELICAL TIE DETAILS

HV STOCK
CONDUCTOR SIZE NECK LINE STOCK ITEM
CODE NAME INSULATOR INSULATOR CONDUCTOR ITEM
TYPE - PROTECTION DIA mm VOLTS kV No
TYPE COLOUR CODE COLOUR CODE No
TOP TIE
SIDE TIE
19/3.25 AAC SLP 11/180 11
NEPTUNE 76 YELLOW ORANGE 14.65.09 14.65.22
ARMOURED ALP 22/450 22

7/3.00 AAC & AAAC SLP 11/180 11

LIBRA,FLUORINE 76 YELLOW RED 14.65.08 14.65.18
ARMOURED ALP 22/450 22

3/2.75 SC/GZ SLP 11/180 11

- 76 YELLOW WHITE 14.65.30 14.65.40
ARMOURED ALP 22/450 22

CONDUCTOR FANNER PLP ALM DULMISON

NAME STRANDING type CAT No. CAT No. SI No. ITEM
NEPTUNE 19/3.25 AAC AAR-163 AAR-1625 14.59.85 58E
MERCURY 7/4.50 AAC
WASP 7/.173 (IMP) AAC AAR-135 AAR-1350 14.59.82 58D
BANANA 6/1/3.75 ACSR
MINK 6/1/.144 (IMP) ACSR AAR-113 AAR-1125 14.60.26 -
FLUORINE 7/3.00 AAAC
APPLE 6/1/3.00 ACSR
FERRET 6/1/.118 (IMP) ACSR AAR-090 AAR-0900 14.60.25 58B
RAISIN 3/4/2.50 ACSR
KOOKABURRA 3/4/0.93 (IMP) ACSR
ALMOND 6/1/2.50 ACSR
GOPHER 6/1/.093 (IMP) ACSR AAR-075 AAR-0750 14.60.17 58A
3/2.75 3/2.75 SC/GZ
3/12 3/12 SC/GZ GAR-055 SAR-0480D 14.84.11 58F

Conductors, Cables, Connectors & Associated Fittings Page 9-27

Overhead Distribution Construction Standard Section 9

Conductor Attachments – Application of Helical Ties

Conductors, Cables, Connectors & Associated Fittings Page 9-28

Overhead Distribution Construction Standard Section 9

Conductor Attachments – Application of Helical Ties

Conductors, Cables, Connectors & Associated Fittings Page 9-29

Overhead Distribution Construction Standard Section 9

9.15 Conductor Tie Installation

9.15.1 Conductor Attachments – Application of Helical Ties

Conductors, Cables, Connectors & Associated Fittings Page 9-30

Overhead Distribution Construction Standard Section 9

9.15.2 Conductor Tie

Conductors, Cables, Connectors & Associated Fittings Page 9-31

Overhead Distribution Construction Standard Section 9

Conductor Tie

Conductors, Cables, Connectors & Associated Fittings Page 9-32

Overhead Distribution Construction Standard Section 9

LV Conductor Ties

Conductors, Cables, Connectors & Associated Fittings Page 9-33

Overhead Distribution Construction Standard Section 9

9.16 Midspan ‘Flying’ Bridging between Circuits – Open Crossings

Conductors, Cables, Connectors & Associated Fittings Page 9-34

Overhead Distribution Construction Standard Section 9

9.17 Conductor Spreaders

Conductors, Cables, Connectors & Associated Fittings Page 9-35

Overhead Distribution Construction Standard Section 9

9.18 Cable Drum Sizes

Conductors, Cables, Connectors & Associated Fittings Page 9-36

Overhead Distribution Construction Standard Section 10

10 SECTION 10 – POLES

10 SECTION 10 – POLES ............................................................................................................................. 1

10.1 Wood Pole Design Data .............................................................................................................. 2
10.2 Wood Pole Drilling and Fit-out Dimensions – Regular Poles .................................................... 4
10.3 Steel / Concrete (Stobie) Poles .................................................................................................. 5
10.4 Pole Foundations ........................................................................................................................ 6
10.5 Pole Base Fittings ........................................................................................................................ 8
10.6 Pole Numbers ........................................................................................................................... 10
10.7 Identification Plates .................................................................................................................. 11
10.8 Wood Pole Reinstatement ....................................................................................................... 13
10.9 Stobie Pole Reinstatement ....................................................................................................... 18
10.10 Wood Pole Steps (Obsolete for Reference Only) ................................................................... 20
10.11 Pole Classification Markings – Unserviceable Wood Poles ................................................... 22
10.12 Pole Steel Work Components ................................................................................................. 23

Poles Page 10-1

Overhead Distribution Construction Standard Section 10

10.1 Wood Pole Design Data

10.1.1 Pressure Impregnated Wood Poles – New Sizes

Approx. Min.
Dry Sinking
S3 Grade Timber S4 Grade Timber Mass Depth
(kg) (m)
LENGTH
Nominal Nominal Stock Item Min. Min.
(m) Min. Min.
Working Breaking No. Dia. Dia.
Dia. Dia.
Stress Load 2m from 2m from
Tip Tip
butt butt
(mm) (mm)
(mm) (mm)
4 17 325223 209 280 234 305 554 1.55
9.5 6 25 325224 249 320 279 350 746 1.65
8 33 325225 279 350 314 385 916 1.8
4 17 325232 208 293 236 320 681 1.7
11.0 6 25 325233 251 335 286 370 937 1.8
8 33 325234 286 370 321 405 1142 1.8
4 17 325240 215 310 245 340 853 1.65
12.5 6 25 325241 260 355 280 385 1094 1.65
8 33 325242 295 390 330 425 1400 1.65
4 17 325248 217 325 242 350 978 2.0
14.0 6 25 325249 262 370 297 405 1361 2.0
8 33 325250 297 405 337 445 1680 2.0
6 25 325261 266 385 301 420 1587 2.15
15.5 8 33 325262 306 425 341 460 1949 2.15
10 42 325263 336 455 376 495 2244 2.15

Notes:
1. S3 grade timbers include species MS, BG and ST. S4 grade timbers include species AA, WP, MA and
MN. Timber species can be determined from pole identification disk. If in doubt as to species or
grade, assume S4.
2. Minimum sinking depths apply for poles that are either very lightly loaded or in ground such as rock
or hard clay.

Poles Page 10-2

Overhead Distribution Construction Standard Section 10

10.1.2 Pressure Impregnated Wood Poles – Old Sizes

DRY MASS OF
NOMINAL MIN. POLE DIAMETER (mm) MINIMUM
STOCK AVERAGE
LENGTH WORKING ITEM DEPTH IN
ITEM SIZE P.I. POLE
(m) STRESS NO. GROUND 'D'
NO. TIP 2m FROM BUTT (APPROX)
(kN) (mm)
(kg)
LINE POLE 1500
6 202 286 390
STAY POLE 1800
8
8 226 325 1800 470
10 250 357 1800 560
4 325219 115D 202 274 1500 400
9 6 325221 115E 239 310 1650 540
8 325222 115F 272-344 344-392 1800 665
4 325228 115G 208 293 1650 525
10.5 6 325230 115H 247 331 1800 705
8 325231 115J 282-366 366-414 1800 850
4 325235 115K 215 310 1800 665
12 6 325237 115L 255 350 1800 875
8 325239 115M 290-366 385-430 1800 1050
4 325243 115N 223 331 2000 850
13.5 6 325245 115P 269 377 2000 1090
8 325247 115Q 299-366 407-455 2000 1300
6 325256 115R 269 388 2100 1175
15 8 325258 115S 299 419 2100 1485
10 325260 115T 326-374 446-493 2100 1720

Poles Page 10-3

Overhead Distribution Construction Standard Section 10

10.2 Wood Pole Drilling and Fit-out Dimensions – Regular Poles

Poles Page 10-4

Overhead Distribution Construction Standard Section 10

10.3 Steel / Concrete (Stobie) Poles

10.3.1 Stobie Pole Data

POLE APPROX.
MARK STEEL SECTION MASS EMBEDMENT
LENGTH CoG
NO. (mm) (kg) (mm)
(m) (m)
1 9 102x51 TFB 830 4.2 1600
3 9 127x64 TFB 1100 4.2 1700
7 10.5 127x64 TFB 1375 4.8 1700
11 10.5 152x76 TFB 1635 4.8 1800
16 12 152x76 TFB 1850 5.5 2000
20 13 152x76 TFB 1980 6 2000

Poles Page 10-5

Overhead Distribution Construction Standard Section 10

10.4 Pole Foundations

10.4.1 Pole Foundations
.

Ver. 0.1 Poles Page 10-6

Overhead Distribution Construction Standard Section 10

Pole Foundations

Poles Page 10-7

Overhead Distribution Construction Standard Section 10

10.5 Pole Base Fittings

10.5.1 Pole base Fittings

Poles Page 10-8

Overhead Distribution Construction Standard Section 10

10.5.2 Pole base Fittings - Notes

Poles Page 10-9

Overhead Distribution Construction Standard Section 10

10.6 Pole Numbers

Poles Page 10-10

Overhead Distribution Construction Standard Section 10

10.7 Identification Plates

Poles Page 10-11

Overhead Distribution Construction Standard Section 10

Identification Plates

Poles Page 10-12

Overhead Distribution Construction Standard Section 10

10.8 Wood Pole Reinstatement

10.8.1 Wood Pole Reinstatement by Staking Selection Tables

Poles Page 10-13

Overhead Distribution Construction Standard Section 10

10.8.2 Wood Pole Reinstatement by Staking Arrangements

Poles Page 10-14

Overhead Distribution Construction Standard Section 10

10.8.3 Wood Pole Reinstatement ELTEK RFD Type Stakes (Obsolete)

Poles Page 10-15

Overhead Distribution Construction Standard Section 10

10.8.4 Wood Pole Reinstatement ELTEK RFD Type Stakes (Obsolete)

Poles Page 10-16

Overhead Distribution Construction Standard Section 10

10.8.5 Wood Pole Reinstatement Label

Poles Page 10-17

Overhead Distribution Construction Standard Section 10

10.9 Stobie Pole Reinstatement

Poles Page 10-18

Overhead Distribution Construction Standard Section 10

Stobie Pole Reinstatement Notes

Poles Page 10-19

Overhead Distribution Construction Standard Section 10

10.10 Wood Pole Steps (Obsolete for Reference Only)

10.10.1 Pole Steps

Poles Page 10-20

Overhead Distribution Construction Standard Section 10

10.10.2 Pole Steps on Operating Pole (Obsolete for Reference Only)

Poles Page 10-21

Overhead Distribution Construction Standard Section 10

10.11 Pole Classification Markings – Unserviceable Wood Poles

Poles Page 10-22

Overhead Distribution Construction Standard Section 10

10.12 Pole Steel Work Components

Poles Page 10-23

Overhead Distribution Construction Standard Section 10

Pole Steelwork Components

Poles Page 10-24

Overhead Distribution Construction Standard Section 11

11 SECTION 11 – STAYS

11 SECTION 11 – STAYS ............................................................................................................................. 1

11.1 General Notes ............................................................................................................................. 2
11.2 Screw Anchor Stay ...................................................................................................................... 3
11.3 Rock Bolt Stay ............................................................................................................................. 5
11.4 Anchor Block Stay ....................................................................................................................... 7
11.5 Vertical Stay ................................................................................................................................ 9
11.6 Aerial Stay ................................................................................................................................. 11
11.7 Stay Components ...................................................................................................................... 13
11.8 Installation Instructions for Screw Anchor .............................................................................. 19

Stays Page 11-1

Overhead Distribution Construction Standard Section 11

11.1 General Notes

Stays Page 11-2

Overhead Distribution Construction Standard Section 11

11.2 Screw Anchor Stay

Stays Page 11-3

Overhead Distribution Construction Standard Section 11

Screw Anchor Stay - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
SSTAY/W/PLM S 105A 325817 ANCHOR,GUY SINGLE HELIX 200MM X M24 ROD 1
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,Flat Round M20 x 60mm Gal 1
103B 325844 ANCHOR,ROD SCREW 20MM X 2140MM M24 NUT 1
SSTAY/W3/PLM S 105B 325818 ANCHOR,GUY SINGLE HELIX 300MM X M24 ROD 1
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,Flat Round M20 x 60mm Gal 1
103B 325844 ANCHOR,ROD SCREW 20MM X 2140MM M24 NUT 1
SSTAY/SC/PLM S 105A 325817 ANCHOR,GUY SINGLE HELIX 200MM X M24 ROD 1
107 265216 THIMBLE,Wire Rope 16mm Gal.Steel 1
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
103B 325844 ANCHOR,ROD SCREW 20MM X 2140MM M24 NUT 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
75E 32279 BOLT,HEX HEAD M16 X 180MM GAL. C/W NUT 1 (or AR)
75L 32286 BOLT,HEX HEAD M16 X 300MM GAL. C/W NUT 1 (or AR)
87D 65616 WASHER,Flat Round M16 x 30mm Gal 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2

Stays Page 11-4

Overhead Distribution Construction Standard Section 11

11.3 Rock Bolt Stay

Stays Page 11-5

Overhead Distribution Construction Standard Section 11

Rock Bolt Stay - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
RSTAY/W/PLM S 108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
80H 325442 ANCHOR,ROCKFACE 600MM WITH WEDGE/THIMBLE 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,Flat Round M20 x 60mm Gal 1
RSTAY/SC/PLM S 107 265216 THIMBLE,Wire Rope 16mm Gal.Steel 1
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80H 325442 ANCHOR,ROCKFACE 600MM WITH WEDGE/THIMBLE 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
75E 32279 BOLT,HEX HEAD M16 X 180MM GAL. C/W NUT 1 (or AR)
75L 32286 BOLT,HEX HEAD M16 X 300MM GAL. C/W NUT 1 (or AR)
87D 65616 WASHER,Flat Round M16 x 30mm Gal 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2

Stays Page 11-6

Overhead Distribution Construction Standard Section 11

11.4 Anchor Block Stay

Stays Page 11-7

Overhead Distribution Construction Standard Section 11

Anchor Block Stay - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
BSTAY/W/PLM S 103C 325692 GUY ASSEMBLY,FORGED EYE M20 X2100MM 1
105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
86C 65159 WASHER,Flat Round M20 x 60mm Gal 2
BSTAY/SC/PLM S 103C 325692 GUY ASSEMBLY,FORGED EYE M20 X2100MM 1
105C 77506 BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 1
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
107 265216 THIMBLE,Wire Rope 16mm Gal.Steel 1
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
75E 32279 BOLT,HEX HEAD M16 X 180MM GAL. C/W NUT 1 (or AR)
75L 32286 BOLT,HEX HEAD M16 X 300MM GAL. C/W NUT 1 (or AR)
87D 65616 WASHER,Flat Round M16 x 30mm Gal 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,Flat Round M20 x 60mm Gal 1

Stays Page 11-8

Overhead Distribution Construction Standard Section 11

11.5 Vertical Stay

Stays Page 11-9

Overhead Distribution Construction Standard Section 11

Vertical Stay - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
VSTAY/W/S/PLM S 101 323379 SUPPORT,Stay 40 x 40 x 2000mm Vertical 1
105A 325817 ANCHOR,GUY SINGLE HELIX 200MM X M24 ROD 1 (or AR)
105B 325818 ANCHOR,GUY SINGLE HELIX 300MM X M24 ROD 1 (or AR)
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 6
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 1
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 2
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86B 65158 WASHER,Flat Round M16 x 50mm Gal 4
86C 65159 WASHER,Flat Round M20 x 60mm Gal 1
325844 ANCHOR,ROD SCREW 20MM X 2140MM M24 NUT 1
VSTAY/SC/S/PLM S 101 323379 SUPPORT,Stay 40 x 40 x 2000mm Vertical 1
105A 325817 ANCHOR,GUY SINGLE HELIX 200MM X M24 ROD 1 (or AR)
105B 325818 ANCHOR,GUY SINGLE HELIX 300MM X M24 ROD 1 (or AR)
107 265216 THIMBLE,Wire Rope 16mm Gal.Steel 1
108 325719 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH 2
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 14
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 6
55J 146857 CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX 3
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 2
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 2
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 2
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 2
75L 32286 BOLT,HEX HEAD M16 X 300MM GAL. C/W NUT 3
75M 32287 BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 4
87D 65616 WASHER,Flat Round M16 x 30mm Gal 2
86B 65158 WASHER,Flat Round M16 x 50mm Gal 4
325844 ANCHOR,ROD SCREW 20MM X 2140MM M24 NUT 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2

Stays Page 11-10

Overhead Distribution Construction Standard Section 11

11.6 Aerial Stay

Stays Page 11-11

Overhead Distribution Construction Standard Section 11

Aerial Stay - Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
ASTAY/W/PLM S 50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 25
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 2
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 2
86C 65159 WASHER,Flat Round M20 x 60mm Gal 2
ASTAY/SC/PLM S 107 265216 THIMBLE,Wire Rope 16mm Gal.Steel 2
50D 438920 WIRE ROPE,Strand 19/2.00 G1320 50m Coil 25
53U 148511 DEADEND,FULL TENSION 19/2.00 GAL.COND 4
60G 321260 INSULATOR,SUSPENSION 146MM DISC D70S 1
60L 320403 INSULATOR,STRAIN GY3 LILING GUY-TYPE 1
61A 322056 CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL 1
61B 322386 CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI 1
61D 322090 CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP 1
80E 37263 EYE BOLT,FORGED M20 X 375MM GAL C/W NUT 1
82B 40442 NUT,HEX M20 THREAD GALANISED STEEL 1
86C 65159 WASHER,Flat Round M20 x 60mm Gal 1
2A 323314 BRACE,CROSSARM 40 X 700 X 5MM THICK GAL 2
75Z 32261 BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT 1
75E 32279 BOLT,HEX HEAD M16 X 180MM GAL. C/W NUT 1 (or AR)
75L 32286 BOLT,HEX HEAD M16 X 300MM GAL. C/W NUT 1 (or AR)
87D 65616 WASHER,Flat Round M16 x 30mm Gal 2
82A 40441 NUT,HEX M16 THREAD GALANISED STEEL 2

Stays Page 11-12

Overhead Distribution Construction Standard Section 11

11.7 Stay Components

11.7.1 EyeBolts

Stays Page 11-13

Overhead Distribution Construction Standard Section 11

Stays Page 11-14

Overhead Distribution Construction Standard Section 11

11.7.2 Screw Anchor

Stays Page 11-15

 Overhead Distribution Construction Standard Section 11

11.7.3 Cattle / Horse Guard

Stays Page 11-16

 Overhead Distribution Construction Standard Section 11

11.7.4 Stay Insulators

Stays Page 11-17

 Overhead Distribution Construction Standard Section 11

11.7.5 Vertical Stay Strut Steelwork

Stays Page 11-18

Overhead Distribution Construction Standard Section 11

11.8 Installation Instructions for Screw Anchor

11.8.1 Installation Screw Anchor 1

Stays Page 11-19

Overhead Distribution Construction Standard Section 11

Stays Page 11-20

Overhead Distribution Construction Standard Section 11

11.8.2 Installation Screw Anchor 2

Stays Page 11-21

Overhead Distribution Construction Standard Section 11

11.8.3 Installation Screw Anchor 3

VERTICAL DEPTH
TYPE OF STAY OF PROBE
mm
45° 1300
45° WITH EXTENSION 2100
60° 1600
60° WITH EXTENSION 2500

Stays Page 11-22

Overhead Distribution Construction Standard Section 12

12 SECTION 12 – EARTHING

12 SECTION 12 – EARTHING ...................................................................................................................... 1

12.1 MEN – LV Neutral Earth Wood Pole .......................................................................................... 2
12.2 MEN – LV Neutral Earth – Steel / Concrete Pole ...................................................................... 4
12.3 Additional Earthing – Driven Rods ............................................................................................. 7
12.4 Substation Wood Pole Earthing ................................................................................................. 9
12.5 SWER Substation Earthing Details ........................................................................................... 11
12.6 HV Equipment Earth (Not SWER)............................................................................................. 14
12.7 Pilot Cable Earthing Wood Pole ............................................................................................... 16
12.8 HVABC Earthing Schematic ...................................................................................................... 18
12.9 Pilot Cable Earthing Schematic & Notes .................................................................................. 19
12.10 Earthing Practices .................................................................................................................... 20
12.11 Earthing Components .............................................................................................................. 23

Earthing Page 12-1

Overhead Distribution Construction Standard Section 12

12.1 MEN – LV Neutral Earth Wood Pole

Earthing Page 12-2

Overhead Distribution Construction Standard Section 12

MEN LV Neutral Earth - Wood Pole – Materials list

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/LV16MM/PLM S 44D 155010 GROUND ROD,EARTH 13 X 1800MM ERICO611360 2 (or AR)
44E 155145 COUPLING,GROUND ROD 13MM ERICO CC12F 1 (or AR)
44F 155171 DRIVING HEAD,GROUND ROD HAND TYPE-DH12 1 (or AR)
33C 155134 CONNECTOR,GROUND ROD 13-16 TO 50-70MM 1
33E 155136 CONNECTOR,GROUND ROD 50-70 TO 50-70MM 1
33G 155138 CONNECTOR,GROUND ROD 95-120 TO 95-120MM 1
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 8
123A 155002 ROD,EARTH,ANTI-THEFT 70MM2 1
13I 154541 SADDLE,FULL 16MM 2-HOLE GAL.STEEL 5
38 72580 NAIL,CLOUT 2.8MM X 40MM GAL STEEL 24
13H 154540 SADDLE,FULL 13MM 2-HOLE GAL.STEEL 7
55M 144958 CLAMP,PG OH CONNECT 2.7-10.5 COPPER 1
55E 144955 CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM AR
94G 145659 CONNECTOR,IPC LV ABC K-443 FIG.1 AR

Earthing Page 12-3

Overhead Distribution Construction Standard Section 12

12.2 MEN – LV Neutral Earth – Steel / Concrete Pole

12.2.1 MEN LV Neutral Steel / Concrete Pole

Earthing Page 12-4

Overhead Distribution Construction Standard Section 12

MEN LV Neutral Steel / Concrete Pole - Materials list

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/MENSC/PLM S 35E 141363 Lug tinned copper 70mm² cable M12 hole 1
52E 102311 Wire Cu 70mm² 19/2.14 Bare 1
55E 144955 Connector PG Clamp to Mains neutral (Al-Cu) 1
144958 Connector PG Clamp to Mains neutral (Cu-Cu) AR
94G 145659 Connector IPC to 50-150mm² LVABC mains neutral AR
75G 32282 Bolt Hex head M16x220 galv steel 1
82A 40441 Nut M16 galv steel 1
87D 65616 Washer M16 galv steel 1

Earthing Page 12-5

Overhead Distribution Construction Standard Section 12

12.2.2 Earthing Bracket

Earthing Page 12-6

Overhead Distribution Construction Standard Section 12

12.3 Additional Earthing – Driven Rods

Earthing Page 12-7

Overhead Distribution Construction Standard Section 12

Additional Earthing Driven Rods – Materials list

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/EXT/PLM S 44D 155010 Earth Electrode 1800 x 13mm Dia. Steel/Cu Extendable 2 (or AR)
44E 155145 Earth Rod Coupling 13mm (cw locking pin) 1 (or AR)
44F 155171 Driving Head 1 (or AR)
33C 155134 Earth Crimp - Rod 13-16mm to Conductor 50-70mm ² (YGHP29C26) 1
52E 102311 Wire Cu 70mm ² 19/2.14 Bare 10 (or AR)
Electrical Warning Marker Tape 4m (or AR)

Earthing Page 12-8

Overhead Distribution Construction Standard Section 12

12.4 Substation Wood Pole Earthing

Earthing Page 12-9

Overhead Distribution Construction Standard Section 12

Substation Wood Pole Earthing - Separate LV & HV Neutral Earths on same Pole –
Materials List

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/HV/SWER/PLM S 44D 155010 GROUND ROD,EARTH 13 X 1800MM ERICO611360 6 (or AR)
44E 155145 COUPLING,GROUND ROD 13MM ERICO CC12F 3 (or AR)
44F 155171 DRIVING HEAD,GROUND ROD HAND TYPE-DH12
33C 155134 CONNECTOR,GROUND ROD 13-16 TO 50-70MM 3
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 20
42B 244207 PIPE,MEDIUM GALANISED 25MM X 6.5M STEEL 1
38 72580 NAIL,CLOUT 2.8MM X 40MM GAL STEEL 52
13J 154542 SADDLE,FULL 20MM 2-HOLE GAL.STEEL 10
13H 154540 SADDLE,FULL 13MM 2-HOLE GAL.STEEL 20
124A 348630 TAPE,CAUTION-BURIED ELECT CABLE 500M 4m (or AR)
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 2
EARTH/LVMEN/PLM S 38 72580 NAIL,CLOUT 2.8MM X 40MM GAL STEEL 30
13H 154540 SADDLE,FULL 13MM 2-HOLE GAL.STEEL 10
13J 154542 SADDLE,FULL 20MM 2-HOLE GAL.STEEL 5
37 152723 CONDUIT,RIGID PVC 20MM X 4M LD GREY 1
33C 155134 CONNECTOR,GROUND ROD 13-16 TO 50-70MM 1
36C 141304 LUG,BOLTED TERMINAL M12 X 50-70MM2 CU 1
44D 155010 GROUND ROD,EARTH 13 X 1800MM ERICO611360 2
44E 155145 COUPLING,GROUND ROD 13MM ERICO CC12F 1
51P 94184 WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK 16
124A 348630 TAPE,CAUTION-BURIED ELECT CABLE 500M 4m (or AR)
33E 155136 CONNECTOR,GROUND ROD 50-70 TO 50-70MM 1
123A 155002 ROD,EARTH,ANTI-THEFT 70MM2 1

Earthing Page 12-10

Overhead Distribution Construction Standard Section 12

12.5 SWER Substation Earthing Details

12.5.1 Transformer Pole – LV & HV SWER Earthing

Earthing Page 12-11

Overhead Distribution Construction Standard Section 12

Transformer pole – LV & HV SWER Earthing – Materials list

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/HV/SWER/PLM S 44D 155010 Earth Electrode 1800 x 13mm Dia. Steel/Cu Extendable 6 (or AR)
44E 155145 Earth Rod Coupling 13mm (cw locking pin) 3 (or AR)
44F 1555171 Driving Head 1 (or AR)
33C 155134 Earth Crimp - Rod 13-16mm to Conductor 50-70mm ² (YGHP29C26) 3
51C 94180 Wire Cu 50mm2 1C Black UV resistant 20
42B 244207 Downrod 25mm NB Galv steel pipe 6.5m, PVC covered 1
38 72580 Clout 40mm galv steel 52
13J 154542 Saddle 20mm galv steel 10
13H 154540 Saddle 13mm galv steel 20
Electrical Warning Marker Tape 4m (or AR)
36C 141304 Q-Lug bolted 50-70mm ² tinned copper 2
EARTH/LVMEN/PLM S 38 72580 Clout 40mm galv steel 30
13H 154540 Saddle 13mm 10
13J 154542 Saddle 20mm galv steel 5
37 152723 Conduit PVC rigid grey 20mm 3m length 1
33C 155134 Earth Crimp - Rod 13-16mm to Conductor 50-70mm ² (YGHP29C26) 1
36C 141304 Q LUG bolted 50 70mm ² tinned copper 1
44D 155010 Earth Electrode 1800 x 13mm Dia. Steel/Cu Extendable 2
44E 155145 Earth Rod Coupling 13mm (cw locking pin) 1
51C 94180 Wire Electrical Cu 50mm ² 1c Black 16
Electrical Warning Marker Tape 4m (or AR)
144958 Connector PG Clamp Cu-Cu 1
155136 Crimp Sleev Connector 1
155002 Anti-Theft Earth Rod with 700 mm 2 Leads 1

Earthing Page 12-12

Overhead Distribution Construction Standard Section 12

12.5.2 SWER Substation Earthing Schematic

Earthing Page 12-13

Overhead Distribution Construction Standard Section 12

12.6 HV Equipment Earth (Not SWER)

Earthing Page 12-14

Overhead Distribution Construction Standard Section 12

HV Equipment Earth (NOT SWER) – Materials list

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/HV/70/PLM S 44D 155010 Earth Electrode 1800 x 13mm Dia. Steel/Cu Extendable 2 (or AR)
70mm² 44E 155145 Earth Rod Coupling 13mm (cw locking pin) 1 (or AR)
44F 155171 Driving Rod 1 (or AR)
33C 155134 Earth Crimp - Rod 13-16mm to Conductor 50-70mm² (YGHP29C26) 1
51P 94184 Wire Cu 70mm² 1C Black UV resistant 10
155002 Anti-theft copper-bonded steel rod, PVC ins 70mm² with leads, 3m 1
154541 Saddle 16mm galv steel 5
38 72580 Clout 40mm galv steel 26
13H 154540 Saddle 13mm galv steel 8
144958 Connector PG Clamp Cu-Cu 1 (or AR)
36C 141304 Q LUG bolted 50 70mm² tinned copper 1 (or AR)
EARTH/HV/OP/ZONE/PLM S 44D 155010 Earth Electrode 1800 x 13mm Dia. Steel/Cu Extendable 2 (or AR)
120mm² 44E 155145 Earth Rod Coupling 13mm (cw locking pin) 1 (or AR)
See Note 3 sect 12.6-1 33D 155135 Earth Crimp - Rod 13-16mm to Conductor 95-120mm² (YGHP29C26) 1
Use near zone subs Wire Cu 120mm² 1C 10
155003 Anti-theft copper-bonded steel rod, PVC ins 120mm² with leads, 3m 1
154541 Saddle 16mm galv steel 5
38 72580 Clout 40mm galv steel 26
13H 154540 Saddle 13mm galv steel 8
144958 Connector PG Clamp Cu-Cu 1 (or AR)
36E 141306 LUG bolted 120 150mm² tinned copper 1 (or AR)

Earthing Page 12-15

Overhead Distribution Construction Standard Section 12

12.7 Pilot Cable Earthing Wood Pole

Earthing Page 12-16

Overhead Distribution Construction Standard Section 12

HV Pilot Cable Earthing Wood Pole – Materials list

Unit Assembly Store Type Item Ref Stock Item Stock Item Description Quantity
EARTH/LVA/PLM S 44D 155010 Earth Electrode 1800 x 13mm Dia. Steel/Cu Extendable 2 (or AR)
LV earth only 44E 155145 Earth Rod Coupling 13mm (cw locking pin) 1 (or R)
44F 155171 Driving Rod 1 (or AR)
50mm² 33C 155134 Earth Crimp - Rod 13-16mm to Conductor 50-70mm ² (YGHP29C26) 1
2
51A 103208 Wire Cu 16mm 1C Black UV resistant 20
155002 Anti-theft copper-bonded steel rod, PVC ins 70mm ² leads, 3m 1 (or AR)
154541 Saddle 16mm galv steel 5
38 72580 Clout 40mm galv steel 26
13H 154540 Saddle 13mm galv steel 8
144958 Connector PG Clamp Cu-Cu 2
Electrical Warning Marker Tape 4m (or AR)
36C 141304 Q LUG bolted 50 70mm ² tinned copper 1

Earthing Page 12-17

Overhead Distribution Construction Standard Section 12

12.8 HVABC Earthing Schematic

Earthing Page 12-18

Overhead Distribution Construction Standard Section 12

12.9 Pilot Cable Earthing Schematic & Notes

Earthing Page 12-19

Overhead Distribution Construction Standard Section 12

12.10 Earthing Practices

12.10.1 Additional Earthing

Earthing Page 12-20

Overhead Distribution Construction Standard Section 12

12.10.2 Earthing Enhancing Compound

GROUND TYPE WATER/10kg SACK

DRY SOIL, DRY CLAY, ROCK AND 15 LITRES
SABDSTONE (APPROX. SETTING TIME 30 MINS)
WET SOIL, WET CLAY, SAND 12 LITRES
(APPROX. SETTING TIME 20 MINS)
PEBBLES, SMALL STONES, 10 LITRES
VERY POROUS GROUND (APPROX. SETTING TIME 15 MINS)

Earthing Page 12-21

Overhead Distribution Construction Standard Section 12

Earthing Enhancing Compound

Earthing Page 12-22

Overhead Distribution Construction Standard Section 12

12.11 Earthing Components

12.11.1 Multiple Rod Deep Driving Earthing Systems

Earthing Page 12-23

Overhead Distribution Construction Standard Section 12

12.11.2 Anti-Theft Deterrent Option – 70 to 120mm2 Cable

CABLE SIZE STOCK ITEM No.

70mm² 155002
120mm² 155003

Earthing Page 12-24

 Overhead Distribution Construction Standard Section 13

13 SECTION 13 – LINE COMPONENTS

13 SECTION 13 – LINE COMPONENTS ...................................................................................................... 1

13.1 Crossarms .................................................................................................................................... 2
13.2 LV Insulators ................................................................................................................................ 5
13.3 HV Insulators ............................................................................................................................... 9
13.4 Bolts, Nuts, Coach Screws and Washers ................................................................................. 13
13.5 Various Items ............................................................................................................................ 16
13.6 General Steelwork .................................................................................................................... 17
13.6 Stores Item List .......................................................................................................................... 33

Line Components Page 13-1

Overhead Distribution Construction Standard Section 13

13.1 Crossarms
13.1.1 Wood Crossarms

Line Components Page 13-2

Overhead Distribution Construction Standard Section 13

13.1.2 Steel Crossarms

Line Components Page 13-3

Overhead Distribution Construction Standard Section 13

Line Components Page 13-4

Overhead Distribution Construction Standard Section 13

13.2 LV Insulators
13.2.1 LV Insulators

Line Components Page 13-5

Overhead Distribution Construction Standard Section 13

13.2.2 LV Insulator Pins

Line Components Page 13-6

Overhead Distribution Construction Standard Section 13

13.2.3 LV Insulator Pin Assemblies

Line Components Page 13-7

Overhead Distribution Construction Standard Section 13

13.2.4 LV Insulator Aerodynamic

Line Components Page 13-8

Overhead Distribution Construction Standard Section 13

13.3 HV Insulators
13.3.1 HV Pin Insulator

Line Components Page 13-9

Overhead Distribution Construction Standard Section 13

13.3.2 HV Insulator Pins

Line Components Page 13-10

Overhead Distribution Construction Standard Section 13

HV Insulator Pins

Line Components Page 13-11

Overhead Distribution Construction Standard Section 13

13.3.3 HV Pin Insulator Assemblies

Line Components Page 13-12

Overhead Distribution Construction Standard Section 13

13.4 Bolts, Nuts, Coach Screws and Washers

13.4.1 Bolts, Nuts, Coach Screws & Washer

Line Components Page 13-13

Overhead Distribution Construction Standard Section 13

13.4.2 Bolts, Nuts, Coach Screws & Washer

Line Components Page 13-14

Overhead Distribution Construction Standard Section 13

13.4.3 Application of Washers through Timber & Steel

Line Components Page 13-15

Overhead Distribution Construction Standard Section 13

13.5 Various Items

POLE TOP STEELWORK & WOOD ITEMS

ITEM No. DESCRIPTION MASS (KG)
1D STEEL CROSSARM 15.5
1E STEEL CROSSARM 26.5
1G STEEL CROSSARM 18
1A WOOD CROSSARM (GREEN OR DRY) 16 OR 19
1B WOOD CROSSARM (GREEN OR DRY) 21.5 OR 25.5
1C WOOD CROSSARM (GREEN OR DRY) 24 OR 28.5
3 STEEL STRAIN D.P. PLATE 3.5
4 STEEL "L" BRACKET 5
5 STEEL CROSSARM STRAP 1.1
2A STEEL CROSSARM STRAP 0.8
7 STEEL LINK PLATE 7
15A STEEL TRANSFORMER HANGING BRACKET 20
49 STEEL "V" BRACKET 3.5
50 STEEL TRANSFORMER BEAM 22.5
51 STEEL TRANSFORMER CROSS MEMBER 15
52 STEEL TRANSFORMER PROPS 10
63 STEEL TRANSPOSITION BRACKET 6.5
24A STEEL AIR BREAK SWITCH CROSS MEMBER 20.5
24B STEEL AIR BREAK SWITCH CROSS MEMBER 27
24C STEEL AIR BREAK SWITCH RAISER 9
12B STEEL CABLE SADDLE SUPPORT 3
25 STEEL FUSE ADAPTOR PLATE 3.5
46A STEEL 22KV RECLOSER MAIN SUPPORT BEAM 12
46B STEEL 22KV RECLOSER LOWER SUPPORT ARM 17.5
46C STEEL 22KV RECLOSER CROSS MEMBER 7.7
46D STEEL 22KV RECLOSER TOP SUPPORT ARM 9.3
46E STEEL 22KV RECLOSER STRUT 7

INSULATORS, SWITCHES & FUSES

60D 11KV PIN INSULATOR, C/W PIN 2.5
60E 22KV PIN INSULATOR, C/W PIN 6.8
11KV DISC INSULATOR (PORC), C/W BALL AND SOCKET FITTINGS 4.5
60G 22KV DISC INSULATOR (PORC), C/W BALL AND SOCKET FITTINGS 7.7
64A 660 V 630 AMP ISOLATOR 2.8
11KV 630 AMP ISOLATOR 19.5
63J 22KV 630 AMP ISOLATOR 27.5
63M 22KV 100 AMP DROP OUT FUSE MOUNT, C/W TUBE 11
22KV AUTOMATIC SECTIONALISER THREE PHASE (ABB AUTOLINK) 90

PUBLIC LIGHTING EQUIPMENT

FABRICATED PUBLIC LIGHTING BRACKETS
70A TYPE 1 UPLIFT BRACKET, OUTREACH 3M, UPLIFT 2M 22.5
70B TYPE 2 UPLIFT BRACKET, OUTREACH 3M, UPLIFT .9M 21.2
70C TYPE 3 STRAIGHT BRACKET, OUTREACH 1.25M 7.8
70D TYPE 4 STRAIGHT BRACKET, OUTREACH 1.5M 10
70E TYPE 5 STRAIGHT BRACKET, OUTREACH 3M 14.7
RHEEM COLUMNS BRACKETS FOR SLIPFIT, TAPERED AND ANGLED
OUTREACH 1.5M UPLIFT 2M 18
OUTREACH 2M UPLIFT 2M 22
OUTREACH 3M UPLIFT 2M 26
OUTREACH 4.5M UPLIFT 2M 30

Line Components Page 13-16

Overhead Distribution Construction Standard Section 13

13.6 General Steelwork

13.6.1 Poletop Steelwork Details

Line Components Page 13-17

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-18

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-19

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-20

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-21

Overhead Distribution Construction Standard Section 13

Schneider RL27 Poletop Mounting Bracket

Line Components Page 13-22

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-23

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-24

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-25

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-26

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-27

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-28

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-29

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-30

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-31

Overhead Distribution Construction Standard Section 13

Poletop Steelwork Details

Line Components Page 13-32

 Overhead Distribution Construction Standard Section 13

13.6 Stores Item List

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY
323210 1A CROSSARM,WOOD 100 X 100 X 1830MM LONG SAWN HARD WOOD 1830 LONG CROSSARMS

323211 1B CROSSARM,WOOD 100 X 100 X 2440MM LONG SAWN HARD WOOD 2440 LONG CROSSARMS

323212 1C CROSSARM,WOOD 100 X 100 X 2750MM LONG SAWN HARD WOOD 2750 LONG CROSSARMS

323304 1D CROSSARM,STEEL 75 X 75 X 2210MM MK4 GAL GALVANISED STEEL 2210 LONG CROSSARMS

323305 1E CROSSARM,STEEL 100 X 100 X 2210MM GAL GALVANISED STEEL 2210 LONG CROSSARMS

323309 1G CROSSARM,STEEL 75 X 75 X 2210MM GAL GALVANISED STEEL 2210 ANGLED CROSSARMS

322214 2A CROSSARM STRAP GALVANISED STEEL 40 x 5 x 700 POLETOP STEELWORK

323317 2B BRACE,CROSSARM 40 X 5 X 500MM FLAT GAL GALVANISED STEEL 40 x 5 x 500 POLETOP STEELWORK

323310 3 PLATE,STRAIN DOUBLE PIN 65 X 12MM STEEL GALVANISED STEEL 65 x 12 x 678 POLETOP STEELWORK
DOUBLE 1E CROSSARM
3B 1E CROSSARM REINFORCEMENT PLATE (TUNK'S) GALVANISED STEEL REINFORCEMENT FOR DEAD END POLETOP STEELWORK
ARRANGEMENT (D-OH1- 2.1/35)
323311 4 BRACKET,RIGHT ANGLE 75 X 12MM GAL GALVANISED STEEL 75 x 12 x 660 POLETOP STEELWORK

323235 4B BRACE,RAISER BEAM 40 X 5 X 500MM GAL GALVANISED STEEL TEMPORARY HV POLE RAISER POLETOP STEELWORK

323236 4C BEAM,RAISER 125 X 65 X 2060MM TYPE-2 GALVANISED STEEL TEMPORARY HV POLE RAISER POLETOP STEELWORK

323312 5 PLATE,SPACING 50 X 140 X 6MM THICK GAL GALVANISED STEEL 50 x 6 x 140 POLETOP STEELWORK

323315 6A BRACKET,INSULATOR 50 X 6MM C/W BRACE GALVANISED STEEL 50 x 6 x 300 POLETOP STEELWORK

323388 6C BRACKET,DOUBLE-ANGLE 2 X 90DEG GAL GALVANISED STEEL 150 x 75 x 285 LG POLETOP STEELWORK

323399 6D SPACER,INSULATOR PIN 150X100X5X100MM RHS GALVANISED STEEL 150 x 100 x 5 RHS POLETOP STEELWORK

323318 7 PLATE,MOUNTING 110 X 10MM HORIZONTAL LNK GALVANISED STEEL 110 x 10 x 860 POLETOP STEELWORK

323325 9A 30 DEG F/BRACKET (22KV) GALVANISED STEEL 615 LINK BASE POLETOP STEELWORK

236140 9B 30 DEG BRACKET GALVANISED STEEL 480-580 LINK BASE POLETOP STEELWORK

322063 9C BRACKET,INSULATOR STAND-OFF 50X50X900MM GALVANISED STEEL USE WITH SYNTHETIC INSULATORS POLETOP STEELWORK

323326 10A PROTECTOR,CABLE-WOOD POLE 3400MM ALUM ALUMINIUM ALLOY WOOD POLE POLETOP STEELWORK

323337 10B CABLE GUARD ALUMINIUM ALLOY S/C POLE POLETOP STEELWORK
GROUNDLINE REINFORCEMENT FOR
325430 10C STAKE REINFORCING GALVANISED STEEL POLETOP STEELWORK
WOOD POLE
50 x 10 x 90 MOUNTING BRACKET FOR
323336 11 PLATE,GUARD STEEL & CONCRETE POLES GAL GALVANISED STEEL POLETOP STEELWORK
S/C CABLE GUARD
50 x 10 x 150 MOUNTING BRACKET
323328 12A SADDLE PLATE,M16 THREADS 2 X M12 STUDS GALVANISED STEEL POLETOP STEELWORK
FOR S/C CABLE SADDLE
323371 12B BRACKET,DOUBLE-ANGLE SADDLE TYPE GAL GALVANISED STEEL STAND OFF POLETOP STEELWORK

Line Components Page 13-33

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

323338 13A SADDLE,FULL 50 X 3MM 2-H 90MM CABLE GAL GALVANISED STEEL TO SUIT 90 DIA CABLE POLETOP STEELWORK

323339 13B SADDLE,FULL 50 X 3MM 2-H 80MM CABLE GAL GALVANISED STEEL TO SUIT 80 DIA CABLE POLETOP STEELWORK

323340 13C SADDLE,FULL 50 X 3MM 2-H 75MM CABLE GAL GALVANISED STEEL TO SUIT 75 DIA CABLE POLETOP STEELWORK

323341 13D SADDLE,FULL 50 X 3MM 2-H 65MM CABLE GAL GALVANISED STEEL TO SUIT 65 DIA CABLE POLETOP STEELWORK

323342 13E SADDLE,FULL 50 X 3MM 2-H 60MM CABLE GAL GALVANISED STEEL TO SUIT 60 DIA CABLE POLETOP STEELWORK

323374 13F SADDLE,FULL 50 X 3MM 2-H 45MM CABLE GAL GALVANISED STEEL TO SUIT 45 DIA CABLE POLETOP STEELWORK
USED TO ATTACH 20mm CONDUIT ON
154540 13H SADDLE,FULL 13MM 2-HOLE GAL.STEEL GALVANISED STEEL POLETOP STEELWORK
EARTHING ARRANGEMENTS
154541 13I SADDLE,FULL 16MM 2-HOLE GAL.STEEL GALVANISED STEEL POLETOP STEELWORK
USED TO ATTACH 20mm CONDUIT ON
154542 13J SADDLE,FULL 20MM 2-HOLE GAL.STEEL GALVANISED STEEL POLETOP STEELWORK
EARTHING ARRANGEMENTS
323343 14A SADDLE,FULL 50 X 3MM 2-H 50MM CABLE GAL GALVANISED STEEL 200 DIA POLETOP STEELWORK

323344 14B POLE CAP,225MM DIA, GAL MILD STEEL GALVANISED STEEL 225 DIA POLETOP STEELWORK

323345 14C POLE CAP,250MM DIA, GAL MILD STEEL GALVANISED STEEL 250 DIA POLETOP STEELWORK

323346 14D POLE CAP,275MM DIA, GAL MILD STEEL GALVANISED STEEL 275 DIA POLETOP STEELWORK

323347 14E BLOCK,TRANS.STAND-OFF 50X50X5X80MM GAL GALVANISED STEEL 300 DIA POLETOP STEELWORK

323376 14F POLE CAP GALVANISED STEEL 325 DIA POLETOP STEELWORK
USED TO SUPPORT CROSSARM
323348 15A BRACKET,MOUNTING TRANSFORMER HANGING GAL GALVANISED STEEL POLETOP STEELWORK
TRANSFORMERS
323386 15B U-BOLT,B9998.5J C/W NUTS & WASHERS & B/P GALVANISED STEEL TO SUIT SUPERSEDED ITEM 15A POLETOP STEELWORK
USE SQUARE WASHERS S.I. No
323349 15C BRACKET,MOUNTING 50X50X6MM GAL STEEL GALVANISED STEEL POLETOP STEELWORK
06.68.03
323461 15D BRACKET, REGULATOR MOUNTING GALVANISED STEEL Complete with Backing Plate POLETOP STEELWORK

323453 15E BRACKET, CONVERSION 100-500KVA TX WILSON GALVANISED STEEL Wilsons Design POLETOP STEELWORK

323349 16A BRACKET,MOUNTING 50X50X6MM GAL STEEL GALVANISED STEEL T/F PLATFORM POLETOP STEELWORK

323350 16B BEAM,SUPPORT TRANSFORMER 1525MM GAL GALVANISED STEEL T/F PLATFORM POLETOP STEELWORK

323351 16C BEAM,SUPPORT TRANSFORMER 1010MM GAL GALVANISED STEEL T/F PLATFORM POLETOP STEELWORK

323352 16D BEAM,TRANSFORMER PROP LH 75X75X6MM GAL GALVANISED STEEL T/F PLATFORM POLETOP STEELWORK

323353 16E BEAM,TRANSFORMER PROP RH 75X75X6MM GAL GALVANISED STEEL T/F PLATFORM POLETOP STEELWORK

323377 16F GUIDE,TRANSFORMER BEAM 65 X 10MM GAL GALVANISED STEEL T/F PLATFORM POLETOP STEELWORK

323354 16G PLATE,CLAMPING 50X12X175MM MK54 GAL GALVANISED STEEL TLF PLATFORM POLETOP STEELWORK

323331 17A BRACKET,INSULATOR 50X3X630MM F-STRAP GALVANISED STEEL 50 x 3 x 250 POLETOP STEELWORK

323332 17B BRACKET,INSULATOR 40X3X236MM SHKL-STRAP GALVANISED STEEL 40 x 3 x 225 POLETOP STEELWORK

Line Components Page 13-34

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

323357 17D BRACKET,DOUBLE-ANGLE 40 X 5MM MK57 GAL GALVANISED STEEL 40 X 5 X 110 POLETOP STEELWORK

323358 17E BRACKET,DOUBLE-ANGLE 25 X 3MM MK58 GAL GALVANISED STEEL 25 x 3 x 76 POLETOP STEELWORK

323378 17F BRACKET,CROSSARM 50 X 50 X 390MM GAL GALVANISED STEEL 50 x 5 x 390 POLETOP STEELWORK

322364 17G STRAP,SCISSOR GAL STEEL 70KN FAIL LOAD GALVANISED STEEL SET OF TWO POLETOP STEELWORK

323362 18 FUSE BASKET GALVANISED STEEL 245W x 520L x 50D POLETOP STEELWORK

323355 19 STEP,POLE 16MM DIA X 265MM MK55 GAL GALVANISED STEEL POLETOP STEELWORK

323363 20 BRACKET,ANGLE TRANSPOSITION MK63 GAL GALVANISED STEEL POLETOP STEELWORK

323366 23B SADDLE,HALF 30 X 1.6MM MK66 STEEL GAL GALVANISED STEEL DIA 20 CABLE CLAMP DIA 20 POLETOP STEELWORK

242847 23C CLAMP,HOSE WORM DRIVE 35 - 54MM GAL GALVANISED STEEL RAYCHEM EPPA-042-1-70 POLETOP STEELWORK

188504 26B W/POLE OPOSSUM GUARD GALVANISED STEEL COLOURBOND MIST GREEN POLETOP STEELWORK

323361 27B PLATE,SERVICE FUSE MK61 STEEL GAL GALVANISED STEEL MULTI PHASE POLETOP STEELWORK
TYPE 1 - MOUNTS ON CROSARM
323755 29A BRACKET,SERVICE HOOK TYPE-1 GAL GALVANISED STEEL SERVICE FITTINGS
STRAP
323744 29B BRACKET,CONNECT HOUSE SERVICE SHORT HOOK GALVANISED STEEL TYPE 2 - MOUNTS ON FASCIA SERVICE FITTINGS
TYPE 3 - REPLACED BY LV ABC
323359 29C BRACKET,SERVICE POLE MK59 STEEL GAL GALVANISED STEEL SERVICE FITTINGS
EYEBOLT
323324 29D HOOK,SERVICE EXTENSION GAL. MILD STEEL GALVANISED STEEL SERVICE FITTINGS

323387 29E BRACKET,ANGLE 40 X 6MM LV ABC FUSE GAL GALVANISED STEEL SERVICE FITTINGS
USED TO SUPPORT THREE LVABC
323390 29F LVABC FUSE BRACKET 160 AMP - KRONE Al SERVICE FITTINGS
FUSE SWITCHES
ALSO USED FOR 160 AMP SWITCH
323401 29K BRACKET,HOUSE SERVICE FUSE 32X8MM M-PH GALVANISED STEEL SERVICE FITTINGS
FUSE
221839 30B FUSE CARRIER,SERVICE FUSE 30-100A/440V PLASTIC TO SUIT 22.17.50 SERVICE FITTINGS

235501 30C FUSE TUBE EDO UNKNOWN SUITS NGK AND ABB FUSE CARRIERS HV POLETOP SWITCHGEAR

323383 31B PLATE,BLANK 65 X 45MM ALUMINIUM SHEET ALUMINIUM 65 x 45 x 1 IDENTIFICATION TAGS

323385 31C PLATE,METAL YELLOW TRIANGULAR - DM ZINC ANNEAL YELLOW TRIANGULAR IDENTIFICATION TAGS

141680 31E TAG,MARKER NEUTRAL ID BLACK POLY PLASTIC TRANSFORMER INSTALLATIONS IDENTIFICATION TAGS

323780 31G TAG,MARKER "63" ON 30MM ROUND PLASTIC PLASTIC 63 AMP IDENTIFICATION TAGS

323781 31H TAG,MARKER "80" ON 30MM TRIANGLR PLASTIC PLASTIC 80 AMP IDENTIFICATION TAGS

323782 31J TAG,MARKER "100" ON 30MM SQUARE PLASTIC PLASTIC 100 AMP IDENTIFICATIO N TAGS
PHOTOSENSITIVE USED TO UNIQUELY IDENTIFY
325540 31L PLATE,DESIGNATN 6 DIGITS & TASNET.. LOGO IDENTIFICATIO N TAGS
ALUMINIUM SHEET DISTRIBUTION ASSETS
323389 31K PLATE,METAL 20 X 150MM - REINSTATED POLE GALVANISED STEEL 150 x 200 x 0.6 IDENTIFICATIO N TAGS
FOR EARTH ROD (REPLACED BY
155132 33 CLAMP,EARTHING 13MM COPPER ALLOY BODY BRASS CONNECTORS
15.51.33)

Line Components Page 13-35

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

155139 33A GROUND CLAMP,HAMMERLOCK 10-16MM2 X E/R COPPER EARTH ROD CONNECTION CONNECTORS

155140 33B GROUND CLAMP,HAMMERLOCK 50-70MM2 X E/R COPPER EARTH ROD CONNECTION CONNECTORS

155134 33C CONNECTOR,GROUND ROD 13-16 TO 50-70MM COPPER EARTH ROD CONNECTION CONNECTORS

155135 33D CONNECTOR,GROUND ROD 13-16 TO 95-120MM COPPER EARTH ROD CONNECTION CONNECTORS

155136 33E CONNECTOR,GROUND ROD 50-70 TO 50-70MM COPPER EARTH ROD CONNECTION CONNECTORS

155137 33F CONNECTOR,GROUND ROD 50-70 TO 95-120MM COPPER EARTH ROD CONNECTION CONNECTORS

155138 33G CONNECTOR,GROUND ROD 95-120 TO 95-120MM COPPER EARTH ROD CONNECTION CONNECTORS

155133 33H CLAMP,EARTHING 13-15MM TO 16-120MM2 LEAD BRASS EARTH ROD CONNECTION CONNECTORS

152422 34A LINK,CRIMP 50MM2 AL /50MM2 CU BI-METAL ALUMINIUM/COPP ER 50mm2 Al/50mm2 Cu COMPRESSION LINKS

152425 34B LINK,CRIMP 95MM2 AL/70MM2 CU BI-METAL ALUMINIUM/COPP ER 95mm2 Al/70mm2 Cu COMPRESSION LINKS

145650 34C CONNECTOR.IPC HOUSE SERVICE HSC356-S2NW 50mm2 LV ABC COMPRESSION LINKS

145652 35A TERMINAL,LUG COMPRESSION M13 X 50MM2 ALUMINIUM/COPP ER 50mm2 ABC COMPRESSION LUGS

145653 35B TERMINAL,LUG COMPRESSION M13 X 95MM2 ALUMINIUM/COPP ER 95mm2 ABC COMPRESSION LUGS

141349 35C LUG,CRIMP TERMINAL M10 X 16MM2 COPPER TINNED COPPER M10 HOLE 16mm2 CABLE CRIMP LUGS

141361 35D LUG,CRIMP TERMINAL M12 X 50MM2 COPPER TINNED COPPER M12 HOLE 50mm2 CABLE CRIMP LUGS

141363 35E LUG,CRIMP TERMINAL M12 X 70MM2 COPPER TINNED COPPER M12 HOLE 70mm2 CABLE CRIMP LUGS

152476 35F LUG,CRIMP 35MM2 X M10 HOLE BI-METAL ALUMINIUM/COPP ER M12 HOLE 35mm2 CABLE COMPRESSION LUGS

152477 35G LUG,CRIMP 50MM2 X M10 HOLE BI-METAL ALUMINIUM/COPP ER M10 HOLE 50mm2 CABLE COMPRESSION LUGS

152480 35H LUG,CRIMP 120MM2 X M12 HOLE BI-METAL ALUMINIUM/COPP ER M12 HOLE 120mm2 CABLE COMPRESSION LUGS

152491 35J LUG,CRIMP 150MM2 X M12 HOLE BI-METAL T/P ALUMINIUM/COPP M12 HOLE 150mm2 CABLE COMPRESSION LUGS

152482 35K LUG,CRIMP 185MM2 X M12 HOLE BI-METAL ALUMINIUM/COPP M12 HOLE 185mm2 CABLE COMPRESSION LUGS

236333 35L TERMINAL,CRIMP STALK LUG 150MM2 BI-METAL COPPER/ALUMINIUM 150mm2 COMPRESSION LUGS

141371 35N LUG,CRIMP TERMINAL M12 X 120MM2 COPPER TINNED COPPER M12 HOLE120mm2 CRIMP LUGS
M12 HOLE 16mm2 (was previously item
141299 35P LUG,BOLTED TERMINAL M12 X 16MM2 CU TINNED COPPER CRIMP LUGS
36F)
141302 36A LUG,BOLTED TERMINAL M8 X 16MM2 CU COPPER ALLOY M8 HOLE 16mm2 CABLE BOLTED LUGS

141303 36B LUG,BOLTED TERMINAL M10 X 25-35MM2 CU COPPER ALLOY M10 HOLE 35mm2 CABLE BOLTED LUGS

141304 36C LUG,BOLTED TERMINAL M12 X 50-70MM2 CU COPPER ALLOY M12 HOLE 50-70mm2 CABLE BOLTED LUGS

141305 36D LUG,BOLTED TERMINAL M12 X 95MM2 CU COPPER ALLOY M12 HOLE 95mm2 CABLE BOLTED LUGS

141306 36E LUG,BOLTED TERMINAL M16 X 150-185MM2 CU COPPER ALLOY 120-150mm2 BOLTED LUGS

152723 37 CONDUIT,RIGID PVC 20MM X 4M LD GREY PVC GREY CONDUIT

Line Components Page 13-36

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

152630 37B CONDUIT,FLEX CRGTD PVC 20MM X 50M MD GRY PVC GREY CONDUIT

72580 38 NAIL,CLOUT 2.8MM X 40MM GAL STEEL GALVANISED STEEL 40LG CONDUIT

72568 39 STAPLE,FENCE 4MM X 40MM GAL STEEL GALVANISED STEEL 40 x 40 CONDUIT

323372 40 BRACKET,ANGLE 50X50X6MM 90DEG MK72 GAL GALVANISED STEEL 50 x 50 x 6 ANGLE 90 LONG POLETOP STEELWORK

157877 41B SLEEVING,ELECT INSUL POLY 6MM X 30M BLK POLYTHENE DROPPER LEAD COVER PVC SLEEVES

244207 42B PIPE,MEDIUM GALANISED 25MM X 6.5M STEEL GALVANISED WATER PIPE AIR BREAK SWITCH OPERATION PIPE

155010 44D GROUND ROD,EARTH 13 X 1800MM ERICO611360 STEEL/COPPER COPPER BONDED EARTHING COMPONENTS

155145 44E COUPLING,GROUND ROD 13MM ERICO CC12F COPPER EARTHING COMPONENTS

155171 44F DRIVING HEAD,GROUND ROD HAND TYPE-DH12 STEEL EARTHING COMPONENTS

103004 47A CABLE,2CORE X 50MM2 X 7/3.06X 0.6/1 XLPE ALUMINIUM 2c 50mm2 LVABC LVABC

103002 47C CABLE,4CORE X 50MM2 X 7/3.06X 0.6/1 XLPE ALUMINIUM 4c 50mm2 LVABC LVABC

103001 47D CABLE,4CORE X 95MM2X 19/2.63X 0.6/1 XLPE ALUMINIUM 4c 95mm2 LVABC LVABC

103050 47E CABLE,3CORE X 35MM2 X 22KV ABC XLPE ALUMINIUM 3c 22kV 35mm2 HVABC nms HVABC

103015 47F HVABC non metallic screen ALUMINIUM 3c 22kV 185mm2 HVABC nms HVABC

103008 47J CABLE,4CORE X 150MM2 X 0.6/1 XLPE ALUMINIUM 4c 150mm2 LVABC LVABC

103005 47K CABLE,2CORE X 25MM2 X 0.6/1 XLPE ALUMINIUM 2c 25mm2 LVABC LVABC

103006 47L CABLE,3CORE X 25MM2 X 0.6/1 XLPE ALUMINIUM 3c 25mm2 LVABC LVABC

103007 47M CABLE,4CORE X 25MM2 X 0.6/1 XLPE ALUMINIUM 4c 25mm2 LVABC LVABC

101615 48A WIRE,AERIAL 111.30MM2 X 7/4.50 MERCURY ALUMINIUM 7/4.50 AAC BARE CONDUCTOR

101621 48B WIRE,AERIAL 157.60MM2 X 19/3.25 NEPTUNE ALUMINIUM 19/3.25 AAC BARE CONDUCTOR

101610 49 WIRE,AERIAL 49.5MM2 X 7/3.00 FLUORINE ALUMINIUM 7/3.00 AAAC BARE CONDUCTOR

438912 50A WIRE ROPE,STRAND 3/2.75 G1320 3000M DRUM GALVANISED STEEL 3/2.75 SC/GZ STEEL WIRE

438920 50D WIRE ROPE,STRAND 19/2.00 G1320 50M COIL GALVANISED STEEL 19/2.00 SC/GZ STEEL WIRE

103208 51A CABLE,1CORE X 16MM2 X 7/1.70 X 0.6/1 COPPER 1c 16mm2 7/1.70 INSULATED PVC CABLE

103209 51B CONDUCTOR CU INSULATED HD COPPER 1c 25mm2 19/1.35 INSULATED PVC CABLE

94180 51C WIRE,BLDNG 50MM2 X 19/1.78 X 0.6/1KV BLK COPPER 1c 50mm2 19/1.78 INSULATED PVC CABLE

103212 51D CABLE,1CORE X 70MM2 X 19/2.14 X 0.6/1 COPPER 1c 70mm2 19/2.14 INSULATED PVC CABLE
1c 2.5mm2 ANNEALED BLACK WITH
95020 51J CABLE,1CORE X 2.5MM2 X 7/0.67 X0.6/1 BLK COPPER INSULATED PVC CABLE
WHITE OUTER SHEATH
94187 51K WIRE,BLDNG 35MM2 X 19/1.53 X 0.6/1KV BLK COPPER 1c 35mm2 19/1.53 ANNEALED INSULATED PVC CABLE

89961 51M CABLE,1CORE X 16MM2 X 0.6/1KV V-90 COPPER 1c 16mm2 7/1.70 SOFT DRAWN INSULATED PVC CABLE

Line Components Page 13-37

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

94173 51N WIRE,BLDNG 16MM2 X 7/1.70 X 0.6/1 BL-100 COPPER 1c 16mm2 7/1.70 ANNEALED INSULATED PVC CABLE

94184 51P WIRE,BLDNG 70MM2 X 19/2.14 X 0.6/1KV BLK COPPER 1c 70mm2 19/2.14 ANNEALED INSULATED PVC CABLE

94190 51Q WIRE,BLDNG 120MM2 X 37/2.03 X 0.6/1 BLK COPPER 1c 120mm2 37/2.03 ANNEALED INSULATED PVC CABLE
1c 2.5mm2 ANNEALED RED WITH
95021 51R CABLE,1CORE X 2.5MM2 X 7/0.67X 0.6/1 RED COPPER INSULATED PVC CABLE
WHITE OUTER SHEATH
19/.064 CU - USED FOR EARTHING
102372 52C WIRE,AERIAL (USED) 19/0.064 IN STRANDING COPPER BARE CONDUCTOR
CONDUCTOR
19/.083 CU - USED FOR EARTHING
102376 52D WIRE,AERIAL (USED) 19/0.083 IN STRANDING COPPER BARE CONDUCTOR
CONDUCTOR
19/2.14 CU - 70mm2 USED FOR
102311 52E WIRE,AERIAL 70MM2 X 19/2.14 BARE EARTH COPPER BARE CONDUCTOR
EARTHING CONDUCTOR
146431 53C DEADEND,FULL TENSION 7/2.5 CONDUCTOR STEEL/ALUMINIU M 7/2.50 AAC - FULL TENSION CONDUCTOR TERMINATION

146471 53D DEADEND,FULL TENSION 7/3.00 CONDUCTOR ALUMINIUM ALLOY 7/3.00 AAC AND AAAC - FULL TENSION CONDUCTOR TERMINATION

146434 53E DEADEND,FULL TENSION 7/.134 CONDUCTOR STEEL/ALUMINIU M 7/.134 AAC - FULL TENSION CONDUCTOR TERMINATION

146435 53F DEADEND,FULL TENSION 7/3.75 CONDUCTOR STEEL/ALUMINIU M 7/3.75 AAC - FULL TENSION CONDUCTOR TERMINATION

146436 53G DEADEND,FULL TENSION 7/4.50 CONDUCTOR STEEL/ALUMINIU M 7/4.50 AAC - FULL TENSION CONDUCTOR TERMINATION

146440 53H DEADEND,FULL TENSION 19/3.25 CONDUCTOR STEEL/ALUMINIU M 19/3.25 AAC CONDUCTOR TERMINATION

148501 53J DEADEND,FULL TENSION 3/2.75 GAL.COND GALVANISED STEEL 3/2.75 SC/GZ - FULL TENSION CONDUCTOR TERMINATION

146470 53K DEADEND,FULL TENSION 6/1/2.50 CONDUCTR STEEL/ALUMINIU M 6/1/2.50 ACSR - FULL TENSION CONDUCTOR TERMINATION

148232 53P DEADEND,FULL TENSION 7/0.064 COPPER CADMIUM/COPPE R 7/.064 CU - FULL TENSION CONDUCTOR TERMINATION

148234 53Q DEADEND,FULL TENSION 7/0.080 COPPER CADMIUM/COPPE R 19/.064 CU - FULL TENSION CONDUCTOR TERMINATION

148239 53S DEADEND,FULL TENSION 19/0.083 COPPER CADMIUM COPPER 19/.083 CU - FULL TENSION CONDUCTOR TERMINATION

148240 53T DEADEND,FULL TENSION 19/0.104 COPPER CADMIUM/COPPE R 19/.101 CU CONDUCTOR TERMINATION

148511 53U DEADEND,FULL TENSION 19/2.00 GAL.COND GALVANISED STEEL 19/2.00 SC/GZ CONDUCTOR TERMINATION

324110 53V DEADEND,HELICAL 2&4C 10MM2 - 2C 16MM2 STEEL/PLASTIC COVERED 16mm2 2C CONDUCTOR TERMINATION

324115 53W DEADEND,HELICAL 3&4C 16MM2 LIMITED TNSN STEEL/PLASTIC COVERED 16mm2 3C and 4C CONDUCTOR TERMINATION

324105 53X SERVICE TERM HELICAL STEEL/PLASTIC COVERED 50mm2 and 70mm2 1C CONDUCTOR TERMINATION

148506 53Y DEADEND,FULL TENSION 7/2.75 GAL.COND GALVANISED STEEL 7/2.75 SC/GZ (STAY WIRE) CONDUCTOR TERMINATION

149111 53AA DEADEND,FULL TENSION 7/5.00 + CAT ALUM ALUMINIUM ALLOY 3c 35mm2 HVABCnms CONDUCTOR TERMINATION

149112 53AB DEADEND,FULL TENSION 19/3.65 +CAT ALUM ALUMINIUM ALLOY 3c 185mm2 HVABCnms CONDUCTOR TERMINATION

149122 53AC RESTRAINT,BUNDLE 70MM2/35MM2 IBHR1455 ALUMINIUM ALLOY 2 piece CONDUCTOR TERMINATION

149121 53AD RESTRAINT,BUNDLE 22KV 185MM2 IBHR1780 ALUMINIUM ALLOY 2 piece CONDUCTOR TERMINATION
COPPER/ALUMINIUM/STEE
54A CONDUCTOR TIES HAND TIE HV AND LV HAND TIE
L

Line Components Page 13-38

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

COPPER/ALUMINI
54B CONDUCTOR TIES DOUBLE HAND TIE HV HAND TIE
UM/STEEL
COPPER/ALUMINI
54C CONDUCTOR TIES HAND TIE LV HAND TIE
UM/STEEL
146505 54D TOP TIE,UNARMOURED 7/3.00 CONDUCTOR 7/3.00 TOP TIE HELICAL TIE

146510 54F TOP TIE,UNARMOURED 19/3.25 CONDUCTOR 19/3.25 TOP TIE HELICAL TIE

146530 54H TOP TIE,ARMOURED 3/3.75 SC/GZ CONDUCTOR 3/2.75 TOP TIE HELICAL TIE

146540 54J SIDE TIE,ARMOURED 3/3.75 SC/GZ CONDUCTOR 3/2.75 SIDE TIE HELICAL TIE

146809 55A CLAMP,LIVE LINE RING FITTING M12 - B24T TINNED BRASS LIVE LINE CLAMP - RING TYPE CONDUCTOR CLAMPS

146601 55B CONNECTOR,TEE STC 6.0-19.00MM CONDUCT COPPER/ALUMINI UM DEE CLAMP 7/2.75 CONDUCTOR CLAMPS

146618 55C CONNECTOR,TEE STC 7.5-16.25MM CONDUCT COPPER/ALUMINI UM DEE CLAMP 19/2.00 CONDUCTOR CLAMPS

144950 55D CLAMP,PG OH CONNECT 8.9-18.8 ALUMINIUM ALUMINIUM II/GROOVE AL CONDUCTOR CLAMPS

144955 55E CLAMP,PG OH CONNECT 7.5-17.5/7.5-17.5 BM ALUMINIUM II/GROOVE BIMETAL CONDUCTOR CLAMPS

146854 55F CONNECTOR,CLAMP A SPLIT BOLT 16MM2 MAX BRASS SLIT BOLT 'A' CONDUCTOR CLAMPS

146855 55G CONNECTOR,CLAMP B SPLIT BOLT 35MM2 MAX BRASS SLIT BOLT 'B' CONDUCTOR CLAMPS

146856 55H CONNECTOR,CLAMP C SPLIT BOLT 70MM2 MAX BRASS SLIT BOLT 'C' CONDUCTOR CLAMPS

146857 55J CONNECTOR,CLAMP D SPLIT BOLT 95MM2 MAX BRASS SLIT BOLT 'D' CONDUCTOR CLAMPS

146858 55K CONNECTOR,CLAMP E SPLIT BOLT 185MM2 MAX BRASS SLIT BOLT 'E' CONDUCTOR CLAMPS
USED ON RECLOSER
225798 55L CLAMP,T-TYPE 75 X 120MM 7-19MM COND ALUM Al CONDUCTOR CLAMPS
ARRANGEMENTS
USED ON RECLOSER
144958 55N CLAMP,PG OH CONNECT 2.7-10.5 COPPER Copper CONDUCTOR CLAMPS
ARRANGEMENTS
HV 8.5 - 22mm DIA CU/AL - EDO
236358 56A CABLE CLAMP SINGLE BOLT TINNED BRASS CONDUCTOR CLAMPS
TERMINATION (OBSOLETE)
146261 57A SLEEVE,NT CRIMP LINK 6 - 8MM CND ALUM ALUMINIUM 7/2.50 AAC NON TENSION CONDUCTOR FITTINGS

146262 57B SLEEVE,NT CRIMP LINK 10 - 12MM CND ALUM ALUMINIUM 7/.3.00 AAC NON TEN. CONDUCTOR FITTINGS

146263 57C SLEEVE,NT CRIMP LINK 12 - 13.5MM CND AL ALUMINIUM 7/4.50 AAC NON TEN. CONDUCTOR FITTINGS

146265 57D SLEEVE,NT CRIMP LINK 14 - 16MM CND ALUM ALUMINIUM 19/3.25 AAC NON TEN. CONDUCTOR FITTINGS

146401 57E SLEEVE,FT CRIMP LINK 5 - 8MM TYPE-A AL ALUMINIUM 7/2.50 AAC MED TEN. CONDUCTOR FITTINGS

146402 57F SLEEVE,FT CRIMP LINK 7 - 11MM TYPE-A AL ALUMINIUM 7/3.75 AAC NON TEN. CONDUCTOR FITTINGS

146403 57G SLEEVE,FT CRIMP LINK 9 - 13MM TYPE-A AL ALUMINIUM ALLOY 7/4.50 AAC NON TEN. CONDUCTOR FITTINGS

146405 57H SLEEVE,FT CRIMP LINK 13 - 17MM TYPE-A AL ALUMINIUM ALLOY 19/3.25 AAC MED TEN. CONDUCTOR FITTINGS

146411 57J SLEEVE,FT CRIMP LINK 4.5 - 8MM TYPE-A AL ALUMINIUM ALLOY 6/1/2.50 ACSR FT CONDUCTOR FITTINGS

146412 57K SLEEVE,FT CRIMP LINK 7 - 11MM TYPE-R AL ALUMINIUM ALLOY 7/3.00 AAAC FT CONDUCTOR FITTINGS

Line Components Page 13-39

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

147733 57Q SPLICE,AUTO 10MM CONDUCTOR GL-111M COPPER 7/.048 CU CONDUCTOR FITTINGS

147734 57R SPLICE,AUTO 16MM CONDUCTOR GL-112M COPPER 7/.064 CU CONDUCTOR FITTINGS

147736 57S SPLICE,AUTO F/ TENSION 5.8 - 6.6MM CU COPPER 7/.080 CU CONDUCTOR FITTINGS

147735 57T SPLICE,AUTO F/TENSION 6.5 - 7.6MM CU COPPER 7/.097 CU CONDUCTOR FITTINGS

147738 57U SPLICE,AUTO F/TENSION 7.9 - 9.4MM CU COPPER 19/.064 CU CONDUCTOR FITTINGS

147740 57V SPLICE,AUTO F/TENSION 9.4 - 10.9MM CU COPPER 19/.083 CU CONDUCTOR FITTINGS

147739 57W SPLICE,AUTO F/TENSION 12.6 - 14.2MM CU COPPER 19/.101 CU CONDUCTOR FITTINGS

146017 58A ARMOR ROD,HELICAL - 7.5MM 1300MM LONG ARMOUR ROD 6/1/2.50 ARMOUR RODS

146025 58B ARMOR ROD,HELICAL - 9.0MM 1300MM LONG ARMOUR ROD 6/1/3.00 ARMOUR RODS

145982 58D ARMOR ROD,HELICAL - 13.5MM 1300MM LONG ALUMINIUM ALLOY ARMOUR ROD 7/4.50 ARMOUR RODS

145985 58E ARMOR ROD,HELICAL - 16.5MM 1700MM LONG ALUMINIUM ALLOY ARMOUR ROD 19/3.25 ARMOUR RODS

148411 58F ARMOUR ROD,HELICAL 1300MM X 3/2.75 COND ARMOUR ROD 3/2.75 ARMOUR RODS

322721 59A PIN,INSULATOR 20MM DIA X 22KV GAL STEEL GALVANISED STEEL 22kV INSULATOR PIN

322723 59C PIN,INSULATOR 16MM DIA X LV GAL STEEL GALVANISED STEEL LV INSULATOR PIN

322719 59D PIN,INSULATOR 20MM DIA X 33KV GAL STEEL GALVANISED STEEL 33kV INSULATOR PIN

320756 60A INSULATOR,PIN 660V LVLP PORCELAIN PORCELAIN L.V.L./PIN INSULATOR

321116 60B INSULATOR,STRAIN 57MM SHLV1 PORCELAIN PORCELAIN TYPE SHLV1 INSULATOR

321117 60C INSULATOR,STRAIN 80MM SHLV2 PORCELAIN PORCELAIN TYPE SHLV2 INSULATOR

320531 60E INSULATOR,PIN 22KV AERO PORCELAIN PORCELAIN TYPE ALP 22/450 INSULATOR

320541 60F INSULATOR,PIN 33KV AERO PORCELAIN PORCELAIN TYPE ALP 33/920 INSULATOR

321260 60G INSULATOR,SUSPENSION 146MM DISC D70S PORCELAIN INSULATOR

320735 60H INSULATOR,STANDOFF 24KV 305MM POLYMERIC SYNTHETIC 22kV SET OF 3 INSULATOR

320452 60J INSULATOR,STRAIN 11KV 318MM 4-SHEDS SYNTHETIC 11kV INSULATOR

320453 60K INSULATOR,SUSPENSION 28KV 10-SHED KL-28 SYNTHETIC 22kV INSULATOR

320403 60L INSULATOR,STRAIN GY3 LILING GUY-TYPE PORCELAIN FOR 22kV - 33kV INSULATOR

320551 60M INSULATOR,LINE POST S/C 36KV PORCELAIN PORCELAIN For 33 kV Installatiions
GALVANISED FORGED
322056 61A CLEVIS,ROD-END BALL 16MM 70KN MIN-FAIL INSULATOR FITTINGS
STEEL
GALVANISED FORGED
322386 61B CONNECTOR,ROD-END 16MM 80KN MIN-FAIL MCI INSULATOR FITTINGS
STEEL
322090 61D CLIP,SECURITY 7.9MM S/STEEL 16B-WCLIP STAINLESS STEEL LOCKING PIN FOR SOCKET THIMBLES INSULATOR FITTINGS

144617 62E COVER,INSULATOR PROTECT 11KV X112MM POLY POLYETHYLENE 11kV 112mm DIA BLACK INSULATOR COVERS

Line Components Page 13-40

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

144620 62F COVER,INSULATOR PROTECT 22KV X133MM POLY POLYETHYLENE 22kV 133mm DIA BLACK INSULATOR COVERS
MOULDED WITH NYLON BOLTS M5 x
225771 62G COVER,SURGE DIVERTER HV PREMOULDED INSULATOR COVERS
12mm
236096 63J SWITCH ISOL 22kV HORZ VARIOUS REPLACED BY 23.60.98 HV POLETOP SWITCHGEAR

236323 63M FUSE,CUTOUT 100A/25KV 1P PRIMARY EXPULSN VARIOUS 8kA HV POLETOP SWITCHGEAR

221070 63N FUSEHOLDER,DROPOUT 250MVA X 200A X 1PH VARIOUS HV POLETOP SWITCHGEAR

221072 63R FUSEHOLDER,DROPOUT 500MVA X 200A X 1PH VARIOUS POWDER FILLED FUSE HV POLETOP SWITCHGEAR

236395 63T KIT,FUSE MOUNTING 200A X 25KV 150KV BIL VARIOUS BREAKING CAPACITY (SYM) 10kA HV POLETOP SWITCHGEAR

236328 63U FUSE,CUTOUT 20A/25KV 1P PRIMARY EXPULSN VARIOUS BREAKING CAPACITY (SYM) 12kA HV POLETOP SWITCHGEAR

235708 63V SWITCHING GROUP,24KV X 3P HOR/VERT CW-AD VARIOUS ARC BREAK CHUTE AK POWER HV POLETOP SWITCHGEAR

235709 63W SWITCHING GROUP,24KV X 3P HOR/VERT NO-AD VARIOUS NO ARC CHUTES. AK POWER HV POLETOP SWITCHGEAR
FOR USE WITH AK POWER AIR BREAK
235711 63X ADAPTOR KIT,ABS POLE HANDLE AK POWER GALVANISED STEEL HV POLETOP SWITCHGEAR
SWITCH ON CONDUCTIVE POLES
630A S/TERM (FUSED ISOLATING
236243 64A SWITCHING GROUP,630A/660V X 1P CA MOUNT VARIOUS LV POLETOP SWITCHGEAR
LINK)
235886 64B SWITCHING GROUP,630A/660V X 1P HORIZNTL VARIOUS 630A ISOLATING LINK LV POLETOP SWITCHGEAR
160A WITH FUSE LINKS 245A WITH
236241 64D SWITCH FUSE 500V ABC SINGLE PHASE VARIOUS LV POLETOP SWITCHGEAR
CONNECTING LINKS
236326 64E SWITCHING GROUP,400A LV 3P POLE MOUNT VARIOUS 400A/400A 3ph LV POLETOP SWITCHGEAR
160A SIZE 00 DIN FUSE LINKS OR
250A SOLID LINK 6-95mm2 Cu OR AL.
236247 64F SWITCH,ISOLATING POLE FUSE 6-95MM2 SZ-00 VARIOUS LV POLETOP SWITCHGEAR
TORQUE CONTROLLED SHEAR HD
SCREWS A/F 13mm
ATTACHMENT FOR AIR BREAKS AND POLETOP SWITCHGEAR
236131 66 DEVICE,ARC BREAK 11/22KV X 630A HSB X 3P VARIOUS
ISOLATORS FITTINGS
NONE 67 OPERATING HANDLE GALVANISED STEEL AIR BREAK SWITCH HV POLETOP SWITCHGEAR

323704 70A BRACKET,ANGLE UPLIFT LIGHTING TYPE-1 GAL GALVANISED STEEL TYPE 1 PUBLIC LIGHTING BRACKETS

323703 70B BRACKET,ANGLE UPLIFT LIGHTING TYPE-2 GAL GALVANISED STEEL TYPE 2 PUBLIC LIGHTING BRACKETS

323760 70C BRACKET,STREETLIGHT MOUNT 2000MM TYPE-3 GALVANISED STEEL TYPE 3 PUBLIC LIGHTING BRACKETS

323765 70D BRACKET,STREETLIGHT MOUNT 1500MM TYPE-4 GALVANISED STEEL TYPE 4 PUBLIC LIGHTING BRACKETS

323766 70E BRACKET,STREETLIGHT MOUNT 3000MM TYPE-5 GALVANISED STEEL TYPE 5 PUBLIC LIGHTING BRACKETS

323767 70F BRACKET,POLE MNT TUBE/STRAP 300MM TYPE-A GALVANISED STEEL TYPE A PUBLIC LIGHTING BRACKETS

323764 70G SUPPORT,LIGHTING TUBE/STRAP 350MM TYPE-B GALVANISED STEEL TYPE B PUBLIC LIGHTING BRACKETS

323763 70H SUPPORT,LIGHTING TUBE/STRAP 350MM TYPE-C GALVANISED STEEL TYPE C PUBLIC LIGHTING BRACKETS

32347 72B BOLT HEX. HD M8 x 25 GALVANISED STEEL WITH NUT BOLTS M8

32177 73A BOLT,HEX HEAD M10 X 25MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M10 BOLTS

Line Components Page 13-41

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

32180 73B BOLT,HEX HEAD M10 X 40MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M10 BOLTS

32181 73C BOLT,HEX HEAD M10 X 45MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M10 BOLTS

32182 73D BOLT,HEX HEAD M10 X 50MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M10 BOLTS

32190 73E BOLT,HEX HEAD M10 X 90MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M10 BOLTS

32191 73F BOLT,HEX HEAD M10 X 100MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M10 BOLTS

32215 74A BOLT,HEX HEAD M12 X 65MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32217 74B BOLT,HEX HEAD M12 X 75MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32221 74C BOLT,HEX HEAD M12 X 100MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32223 74E BOLT,HEX HEAD M12 X 120MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32224 74F BOLT,HEX HEAD M12 X 130MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32225 74G BOLT,HEX HEAD M12 X 140MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32226 74H BOLT,HEX HEAD M12 X 150MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32229 74J BOLT,HEX HEAD M12 X 180MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 BOLTS

32265 75A BOLT,HEX HEAD M16 X 65MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32274 75B BOLT,HEX HEAD M16 X 130MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32275 75C BOLT,HEX HEAD M16 X 140MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32276 75D BOLT,HEX HEAD M16 X 150MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32279 75E BOLT,HEX HEAD M16 X 180MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

66192 75F BOLT HEX. HD. M16 x 200 GALVANISED STEEL GRADE 4.6 M16 BOLTS

32282 75G BOLT,HEX HEAD M16 X 220MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32283 75H BOLT,HEX HEAD M16 X 240MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32284 75J BOLT,HEX HEAD M16 X 260MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32285 75K BOLT,HEX HEAD M16 X 280MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32286 75L BOLT,HEX HEAD M16 X 300MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32287 75M BOLT,HEX HEAD M16 X 325MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32288 75N BOLT,HEX HEAD M16 X 350MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32289 75P BOLT,HEX HEAD M16 X 375MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32290 75Q BOLT,HEX HEAD M16 X 400MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32291 75R BOLT,HEX HEAD M16 X 425MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32292 75S BOLT,HEX HEAD M16 X 450MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

Line Components Page 13-42

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

32293 75T BOLT,HEX HEAD M16 X 475MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32294 75U BOLT,HEX HEAD M16 X 500MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32295 75V BOLT HEX. HD. M16 x 525 GALVANISED STEEL GRADE 4.6 M16 BOLTS

32296 75W BOLT,HEX HEAD M16 X 550MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32298 75Y BOLT,HEX HEAD M16 X 600MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32261 75Z BOLT,HEX HEAD M16 X 45MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 BOLTS

32336 76A BOLT,HEX HEAD M20 X 300MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M20 BOLTS

32338 76B BOLT,HEX HEAD M20 X 350MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M20 BOLTS

32340 76C BOLT,HEX HEAD M20 X 400MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M20 BOLTS

32342 76D BOLT,HEX HEAD M20 X 450MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M20 BOLTS

32332 76E BOLT,HEX HEAD M20 X 150MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M20 BOLTS

32346 76F BOLT,HEX HEAD M20 X 550MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M20 BOLTS

33770 77A BOLT,HEX HEAD M12 X 30MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 TOWER

33771 77B BOLT,HEX HEAD M12 X 35MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 TOWER

33772 77C BOLT,HEX HEAD M12 X 40MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M12 TOWER

33780 78A BOLT,HEX HEAD M16 X 35MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 TOWER

33782 78C BOLT TOWER M16 x 45 GALVANISED STEEL GRADE 4.6 M16 TOWER

33783 78D BOLT,HEX HEAD M16 X 50MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 TOWER

33784 78E BOLT,HEX HEAD M16 X 55MM GAL. C/W NUT GALVANISED STEEL GRADE 4.6 M16 TOWER

325630 79A EYE-BOLT,OPEN M16 X 250MM FIXED WASHER GALVANISED STEEL STEEL GRADE XK1320 OPEN EYE

325631 79B EYE-BOLT,OPEN M16 X 350MM FIXED WASHER GALVANISED STEEL STEEL GRADE XK1320 OPEN EYE

325632 79C EYE-BOLT,OPEN M16 X 450MM FIXED WASHER GALVANISED STEEL STEEL GRADE XK1320 OPEN EYE

325633 79D EYE-BOLT,OPEN M16 X 150MM FIXED WASHER GALVANISED STEEL STEEL GRADE XK1320 OPEN EYE

37258 80A EYE BOLT,FORGED M20 X 280MM GAL C/W NUT GALVANISED STEEL CARBON STEEL TO AS1442 EYE

37259 80B EYE BOLT,FORGED M20 X 300MM GAL C/W NUT GALVANISED STEEL CARBON STEEL TO AS1442 CLOSED EYE BOLT M20

37260 80C EYE BOLT,FORGED M20 X 325MM GAL C/W NUT GALVANISED STEEL CARBON STEEL TO AS1442 CLOSED EYE BOLT M20

37261 80D EYE BOLT,FORGED M20 X 350MM GAL C/W NUT GALVANISED STEEL CARBON STEEL TO AS1442 CLOSED EYE BOLT M20

37263 80E EYE BOLT,FORGED M20 X 375MM GAL C/W NUT GALVANISED STEEL CARBON STEEL TO AS1442 CLOSED EYE BOLT M20

37262 80F EYE BOLT,FORGED M20 X 400MM GAL C/W NUT GALVANISED STEEL CARBON STEEL TO AS1442 CLOSED EYE BOLT M20

325442 80H ANCHOR,ROCKFACE 600MM WITH WEDGE/THIMBLE GALVANISED STEEL WITH WEDGE AND THIMBLE CLOSED EYE BOLT M20

Line Components Page 13-43

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

FOR TRANSFORMER
37267 81 SET SCREW,HEX HEAD M12 X 40MM 316S/S STAINLESS STEEL M12 BOLTS
REFURBISHMENT
58660 81B SET SCREW,HEX HEAD M6 X 20MM 316S/S STAINLESS STEEL INCLUDING NUT M6 BOLTS

40441 82A NUT,HEX M16 THREAD GALANISED STEEL GALVANISED STEEL LOOSE NUTS NUTS

40442 82B NUT,HEX M20 THREAD GALANISED STEEL GALVANISED STEEL LOOSE NUTS NUTS

325619 82C HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK GALVANISED STEEL CURRENTLY FORGED NUTS

50225 84A COACH SCREW,HEX HEAD 10MM X 50MM GAL GALVANISED STEEL COACH SCREWS

50226 84B COACH SCREW,HEX HEAD 10MM X 65MM GAL GALVANISED STEEL COACH SCREWS

50228 84C COACH SCREW,HEX HEAD 10MM X 75MM GAL GALVANISED STEEL COACH SCREWS

50230 84D COACH SCREW,HEX HEAD 10MM X 100MM GAL GALVANISED STEEL COACH SCREWS

50248 85A COACH SCREW,HEX HEAD 12MM X 75MM GAL GALVANISED STEEL COACH SCREWS

50250 85B COACH SCREW,HEX HEAD 12MM X 100MM GAL GALVANISED STEEL COACH SCREWS

50253 85C COACH SCREW,HEX HEAD 12MM X 130MM GAL GALVANISED STEEL COACH SCREWS

50255 85D COACH SCREW,HEX HEAD 12MM X 150MM GAL GALVANISED STEEL COACH SCREWS

65157 86A WASHER,FLAT ROUND M12 X 37MM GAL GALVANISED STEEL EXTRA LARGE SERIES WASHERS

65158 86B WASHER,FLAT ROUND M16 X 50MM GAL GALVANISED STEEL EXTRA LARGE SERIES WASHERS

65159 86C WASHER,FLAT ROUND M20 X 60MM GAL GALVANISED STEEL EXTRA LARGE SERIES WASHERS

65614 87B WASHER,FLAT ROUND M10 X 21MM GAL GALVANISED STEEL NORMAL SERIES WASHERS

65615 87C WASHER,FLAT ROUND M12 X 28MM GAL GALVANISED STEEL NORMAL SERIES WASHERS

65616 87D WASHER,FLAT ROUND M16 X 30MM GAL GALVANISED STEEL NORMAL SERIES WASHERS

65617 87E WASHER,FLAT ROUND M20 X 37MM GAL GALVANISED STEEL NORMAL SERIES WASHERS

66412 88A WASHER,FLAT ROUND M12 X 24MM GAL GALVANISED STEEL TOWER TYPE WASHERS

66413 88B WASHER,FLAT ROUND M16 X 30 X 5MM GAL GALVANISED STEEL TOWER TYPE WASHERS
SQUARE TYPE FOR TRANSFORMER
66803 89 WASHER,FLAT SQUARE M20 X75MM GAL.STEEL GALVANISED STEEL WASHERS
INSTALLATIONS
INSULATION PIERCING
145622 94A CONNECTOR,IPC LV ABC K-440 FIG.1 PLASTIC/METAL 16-95mm2 MAIN 1.5-6mm2 TEE
CONNECTORS
INSULATION PIERCING
145630 94B CONNECTOR,IPC LV ABC PLASTIC/METAL 50-150mm2 Al MAIN 35-95mm2 TEE
CONNECTORS
INSULATION PIERCING
145620 94C CONNECTOR,IPC LV ABC PLASTIC/METAL 35-95mm2 MAIN 35-95mm2 TEE
CONNECTORS
INSULATION PIERCING
145619 94D CONNECTOR,IPC LV ABC PLASTIC/METAL 25-95mm2 MAIN 6-35mm2 TEE
CONNECTORS
INSULATION PIERCING
145655 94E CONNECTOR,IPC BARE MAINS-SERVICE R235 PLASTIC/METAL 50-150mm2 Cu MAIN 6-35mm2 TEE
CONNECTORS
INSULATION PIERCING
145662 94F CONNECTOR,IPC LV ABC/PVC R236 ALUMN PLASTIC/METAL 50-150mm2 Al MAIN 6-35mm2 TEE
CONNECTORS

Line Components Page 13-44

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

INSULATION PIERCING
145659 94G CONNECTOR,IPC LV ABC K-443 FIG.1 PLASTIC/METAL 50-150mm2 Al MAIN 35-95mm2 TEE
CONNECTORS
INSULATION PIERCING
145658 94H CONNECTOR,IPC LV ABC PLASTIC/METAL 50-150mm2 Al MAIN 35-95mm2 TEE
CONNECTORS
INSULATION PIERCING
145657 94J CONNECTOR,IPC LV ABC PLASTIC/METAL 150mm2 Al MAIN 150mm2 TEE
CONNECTORS
6-35mm2 Al MAIN TO 4-35mm2 Cu INSULATION PIERCING
145654 94K CONNECTOR,IPC HOUSE SERVICE PLASTIC/METAL
(STRIP Cu) Neutral connector CONNECTORS
INSULATION PIERCING
145637 94L CONNECTOR,IPC LV ABC K-389 2-TAP FIG-1 PLASTIC/METAL 2 x 6-35mm2
CONNECTORS
145610 95A CLAMP,SUSPENSION HINGED 4C X 95MM2 S/S ALUMINIUM ALLOY 4c 95mm2 LVABC SUSPENSION CLAMPS

145604 95B CLAMP,SUSPENSION HINGED 2C X 50MM2 S/S ALUMINIUM ALLOY 2c 50mm2 LVABC SUSPENSION CLAMPS

145612 95C CLAMP,SUSPENSION HINGED 4C X 50MM2 S/S ALUMINIUM ALLOY 4c 50mm2 LVABC SUSPENSION CLAMPS

145611 95D CLAMP,SUSPENSION HINGED 2C X 95MM2 S/S ALUMINIUM 2c 95mm2 LVABC SUSPENSION CLAMPS

149113 95F CLAMP,SUSPENSION 35MM2 HVABC ALUMIN ALUMINIUM 3c 35mm2 HVABCnms SUSPENSION CLAMPS

149114 95G CLAMP,SUSPENSION 185MM2 HVABC ALUMIN ALUMINIUM 3c 185mm2 HVABCnms SUSPENSION CLAMPS

149123 95H CLAMP,SUSPENSION 150MM2/70MM2 HVABC ALUMINIUM 3c 150mm2 HVABCnms SUSPENSION CLAMPS

145608 95J CABLE,SUSPENSION 4C X 150MM LVABC ALUM ALUMINIUM 4c 150mm2 LVABC SUSPENSION CLAMPS

145602 97A CLAMP,TENSION 4 X 50MM2 ABC STEEL/ALUMINIUN 4c 50mm2 - 4c 95mm2 LVABC STRAIN CLAMP

145603 97B CLAMP,TENSION 2 X 50MM2 - 2 X 95MM2 ABC STEEL/ALUMINIUN 2c 50mm2 - 2c 95mm2 LVABC STRAIN CLAMP

145606 97C CLAMP,TENSION 2 X 25MM2 - 2 X35MM2 ABCSC STEEL/ALUMINIUN 2c 25mm2 LVABC SERVICE STRAIN CLAMP

145605 97D CLAMP,TENSION 4 X 25MM2 - 4 X35MM2 ABCSC STEEL/ALUMINIU M 4c 25mm2 LVABC SERVICE STRAIN CLAMP
GALVANISED STEEL AND
145663 97E CLAMP,SERVICE STRAIN 2 X 10-35MM2 XLPE 2c 25mm2 LVABC SERVICE STRAIN CLAMP
NYLON
GALVANISED STEEL AND
145664 97F CLAMP,SERVICE STRAIN 4 X 10-35MM2 XLPE 4c 25mm2 LVABC SERVICE STRAIN CLAMP
NYLON
145607 97G CLAMP,TENSION 4 X 95MM2 - 4 X150MM2 ABC STEEL/ALUMINIU M 4c 150mm2 LVABC STRAIN CLAMP

145618 98A BRACKET,SUSPENSION 25-50DEG. DOUBLE HOOK GALVANISED STEEL LV ABC 50 DEG DEVIATION ANGLE BRACKETS

145609 98B BRACKET FACADE MOUNTING 50mm2 - 95mm2 LVABC BRACKETS

149120 98C HVABC Mounting Bracket High Lift GALVANISED STEEL USE FOR EXTRA CLEARANCE BRACKETS

149119 98D BRACKET,POLE HV ABC SB10312+HB16200 GAL GALVANISED STEEL STANDARD HVABC BRACKET BRACKETS

145646 98F WEAK LINK,LV ABC 10MM X 100MM ABCWL-8 GALVANISED STEEL LVABC FITTING POLETOP STEELWORK

NONE 98E Bracket Double Suspension GALVANISED STEEL HVABC BRACKETS

153104 99 JUNCTION BOX,POLE TOP PVC 50MM 3-PHASE PLASTIC/METAL LV ABC SERVICE LVABC BOX

168026 100C END CAP,HEAT SHRINK 95-65MM CABLE RANGE HEAT SHRINK LOW VOLTAGE CABLE TERMINATION HEAT SHRINK
SEE D-OH1-2.8/6 FOR ARRANGEMENT
323379 101 SUPPORT,STAY 40 X 40 X 2000MM VERTICAL GALVANISED STEEL POLETOP STEELWORK
DRAWING

Line Components Page 13-45

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

GALVANISED FORGED
325842 102A EYE-NUT,M20 THREAD GAL STEEL USED ON SWER AND STAYS EYE NUTS
STEEL
GALVANISED FORGED
325843 102B EYE-NUT,M24 THREAD GAL STEEL USED ON SCREW ANCHOR EYE NUTS
STEEL
GALVANISED FORGED
325619 102D HOOK-NUT,OPEN TYPE T/S M16 BOLT HOOK USED FOR LVABC LINE WORK EYE NUTS
STEEL
GALVANISED FORGED
325838 103A ANCHOR,ROD SCREW 20MM X 1070MM M24 NUT M24 THREAD STAY RODS
STEEL
325844 103B ANCHOR,ROD SCREW 20MM X 2140MM M24 NUT Fabricated Steel

325692 103C GUY ASSEMBLY,FORGED EYE M20 X2100MM GALVANISED STEEL 2 NUTS, SQ. WASHER AND THIMBLE STAY RODS
GALVANISED FORGED
325828 104 COUPLING,ROD SCREW ANCHOR M24 THREAD M24 INT THREAD STAY RODS
STEEL
325817 105A ANCHOR,GUY SINGLE HELIX 200MM X M24 ROD FABRICATED STEEL M24 INT THREAD ANCHORS

325818 105B ANCHOR,GUY SINGLE HELIX 300MM X M24 ROD FABRICATED STEEL M24 INT THREAD ANCHORS

77506 105C BLOCK,PRECAST CONCRETE D-OH1-1.2/1 REV.2 REINFORCED CONCRETE REINFORCED CONCRETE BLOCK ANCHORS

265216 107 THIMBLE,WIRE ROPE 16MM GAL.STEEL GALVANISED STEEL FOR 19/2.00 ANCHORS

325719 108 PROTECTOR,GUY SLIT PVC 25MM X 2000MM WH PVC 1830 LONG STAY SIGHTER

225441 113A FUSE LINK,EXPULSION 1A X 24KV TYPE-K 1 AMP EDO FUSE ELEMENTS

225444 113D EDO Fuse Element AK1 5 AMP EDO FUSE ELEMENTS

225447 113G FUSE LINK,EXPULSION 16A X 24KV TYPE-K 16 AMP EDO FUSE ELEMENTS

225429 113H EDO Fuse Element AK1 20 AMP EDO FUSE ELEMENTS

225430 113J FUSE LINK,EXPULSION 25A X 24KV TYPE-K 25 AMP EDO FUSE ELEMENTS

225431 113K FUSE LINK,EXPULSION 31.5A X 24KV TYPE-K 31.5 AMP EDO FUSE ELEMENTS

225432 113L FUSE LINK,EXPULSION 40A X 24KV TYPE-K 40 AMP EDO FUSE ELEMENTS

225433 113M FUSE LINK,EXPULSION 50A X 24KV TYPE-K 50 AMP EDO FUSE ELEMENTS

225434 113N EDO Fuse Element AK1 63 AMP EDO FUSE ELEMENTS

225435 113P FUSE LINK,EXPULSION 80A X 24KV TYPE-K 80 AMP EDO FUSE ELEMENTS

225436 113Q FUSE LINK,EXPULSION 100A X 24KV TYPE-K 100 AMP EDO FUSE ELEMENTS

225448 113R FUSE LINK,EXPULSION 6/20A X 24KV TYPE-K 6/20 Amp surgeproof EDO FUSE ELEMENTS

236370 113S LINK,SOLID 100A RATING CONT. 2.0KA/1SEC SOLID LINK EDO FUSE ELEMENTS

236391 113T FUSE,POWER 6A X 22KV K-SPEED SMU-20 6 AMP EDO FUSE ELEMENTS

236392 113U FUSE,POWER 15A X 22KV K-SPEED SMU-20 15 AMP EDO FUSE ELEMENTS

236393 113V FUSE,POWER 25A X 22KV K-SPEED SMU-20 25 AMP EDO FUSE ELEMENTS

236394 113W FUSE,POWER 30A X 22KV K-SPEED SMU-20 30 AMP EDO FUSE ELEMENTS

Line Components Page 13-46

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

236397 113X SMU FUSE ELEMENTS 50 AMP EDO FUSE ELEMENTS

236336 113Y FUSE LINK,CUTOUT 5A FAULT TAMER FUSE 5 AMP EDO FUSE ELEMENTS

236329 113Z FUSE LINK,CUTOUT 10A FAULT TAMER FUSE 10 AMP EDO FUSE ELEMENTS

236331 113AA FUSE LINK,CUTOUT 15A FAULT TAMER FUSE 15 AMP EDO FUSE ELEMENTS

236332 113AB FUSE LINK,CUTOUT 20A FAULT TAMER FUSE 20 AMP EDO FUSE ELEMENTS

103509 114A WIRE,ANNLD ALUMIN 4.75MM DIA X 25KG COIL ALUMINIUM ALLOY 1350 2.5mm TIE WIRE

432728 114B TIE WIRE,GAL STEEL 2.5MMD X 2.5KG COIL GALVANISED STEEL 4.75mm TIE WIRE

103602 114C WIRE,ANNLD COPPER 1.75M DIA X 25KG COIL ANNEALED COPPER 1.75mm TIE WIRE

236370 114S LINK,SOLID 100A RATING CONT. 2.0KA/1SEC Solid Link EDO FUSE ELEMENTS

325219 115D POLE,LINE WOODEN 9 METRE X 4KN TREATED WOOD 9m - 4kN WOOD POLES

325221 115E POLE,LINE WOODEN 9 METRE X 6KN TREATED WOOD 9m - 6kN WOOD POLES

325222 115F POLE,LINE WOODEN 9 METRE X 8KN TREATED WOOD 9m - 8kN WOOD POLES

325228 115G POLE,LINE WOODEN 10.5 METRE X 4KN TREATD WOOD 10.5m - 4kN WOOD POLES

325230 115H POLE,LINE WOODEN 10.5 METRE X 6KN TREATD WOOD 10.5m - 6kN WOOD POLES

325231 115J POLE,LINE WOODEN 10.5 METRE X 8KN TREATD WOOD 10.5m - 8kN WOOD POLES

325235 115K POLE,LINE WOODEN 12 METRE X 4KN TREATED WOOD 12m - 4kN WOOD POLES

325237 115L POLE,LINE WOODEN 12 METRE X 6KN TREATED WOOD 12m - 6kN WOOD POLES

325239 115M POLE,LINE WOODEN 12 METRE X 8KN TREATED WOOD 12m - 8kN WOOD POLES

325243 115N POLE,LINE WOODEN 13.5 METRE X 4KN TREATD WOOD 13.5m - 4kN WOOD POLES

325245 115P POLE,LINE WOODEN 13.5 METRE X 6KN TREATD WOOD 13.5m - 6kN WOOD POLES

325247 115Q POLE,LINE WOODEN 13.5 METRE X 8KN TREATD WOOD 13.5m - 8kN WOOD POLES

325256 115R POLE,LINE WOODEN 15 METRE X 6KN TREATED WOOD 15m - 6kN WOOD POLES

325258 115S POLE,LINE WOODEN 15 METRE X 8KN TREATED WOOD 15m - 8kN WOOD POLES

325260 115T POLE,LINE WOODEN 15 METRE X 10KN TREATED WOOD 15m - 10kN WOOD POLES

222207 117A FUSE LINK,NH 63A X 415V CKB DIN-00 VARIOUS 63 AMP - SUITS S.I. No 23.62.41 LVABC FUSE ELEMENTS

222208 117B FUSE LINK,NH 80A X 415V CKB DIN-00 VARIOUS 80 AMP - SUITS S.I. No 23.62.41 LVABC FUSE ELEMENTS

222209 117C FUSE LINK,NH 100A X 415V CKB DIN-00 VARIOUS 100 AMP - SUITS S.I. No 23.62.41 LVABC FUSE ELEMENTS

222210 117D FUSE LINK,NH 125A X 415V CKB DIN-00 VARIOUS 125 AMP - SUITS S.I. No 23.62.41 LVABC FUSE ELEMENTS

222211 117E FUSE LINK,NH 160A X 415V CKB DIN-00 VARIOUS 160 AMP - SUITS S.I. No 23.62.41 LVABC FUSE ELEMENTS

222221 117F FUSE LINK,NH 160A X 415V CKB DIN-2 VARIOUS 160 AMP - SUITS S.I. No 23.63.26 LVABC FUSE ELEMENTS

Line Components Page 13-47

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

222222 117G FUSE LINK,NH 250A X 415V CKB DIN-2 VARIOUS 250 AMP - SUITS S.I. No 23.63.26 LVABC FUSE ELEMENTS

222223 117H FUSE LINK,NH 315A X 415V CKB DIN-2 VARIOUS 315 AMP - SUITS S.I. No 23.63.26 LVABC FUSE ELEMENTS

222224 117J FUSE LINK,NH 400A X 415V CKB DIN-2 VARIOUS 400 AMP - SUITS S.I. No 23.63.26 LVABC FUSE ELEMENTS
POWDER FILLED FUSE
225111 118A FUSE LINK,BS AIR 10A X 12KV 12BDGHA TO FIT S.I.No 221070
ELEMENT HRC
POWDER FILLED FUSE
225121 118D FUSE LINK,BS AIR 31.5A X 12KV 12BDGHA TO FIT S.I.No 221070
ELEMENT HRC
POWDER FILLED FUSE
225122 118E Powder filled Fuse 12kV 40A 360mm long TO FIT S.I.No 221070
ELEMENT HRC
POWDER FILLED FUSE
225196 118H FUSE LINK,CRTRDGE 10A X 24KV 50X565MM TO FIT S.I.No 221072
ELEMENT HRC
POWDER FILLED FUSE
225197 118J FUSE LINK,CRTRDGE 16A X 24KV 50X565MM TO FIT S.I.No 221072
ELEMENT HRC
POWDER FILLED FUSE
225198 118K FUSE LINK,CRTRDGE 20A X 24KV 50X565MM TO FIT S.I.No 221072
ELEMENT HRC
POWDER FILLED FUSE
225199 118L Powder filled Fuse 24kV 25A 595mm long TO FIT S.I.No 221072
ELEMENT HRC
POWDER FILLED FUSE
225201 118M FUSE LINK,CRTRDGE 31.5A X 24KV 50X565MM TO FIT S.I.No 221072
ELEMENT HRC
225797 119B Surge Diverter Base Mount SYNTHETIC GROUND LEAD M12 SURGE DIVERTERS

225715 119D SURGE DIVERTER 10kA -22kV POLYMERIC REPLACED WITH S.I. No 22.57.73 SURGE DIVERTERS

225710 119E SURGE DIVERTER 10kA -12.5kV POLYMERIC REPLACED WITH S.I. No 22.57.72 SURGE DIVERTERS
REPLACES WITH S.I. No 22.57.10.
225772 119F SURGE DIVERTER,OD 10KA X 11KV POLYMERIC SURGE DIVERTERS
ALTERNATIVE S.I. No 22.57.75.
REPLACES WITH S.I. No 22.57.15.
225773 119G SURGE DIVERTER,OD 10KA X 22KV POLYMERIC SURGE DIVERTERS
ALTERNATIVE S.I. No 22.57.76
225774 119H SURGE DIVERTER,OD 33KV ABB POLIM-D 24L POLYMERIC SURGE DIVERTERS

225775 119J SURGE DIVERTER,OD 10KA X 11KV 3EK4-120 M12 STUDS WITH LOCKING NUTS SURGE DIVERTERS

225776 119K SURGE DIVERTER,OD 10KA X 22KV 3EK4-220 SURGE DIVERTERS

225708 119L SURGE DIVERTER 10kA -45kV POLYMERIC M12 STUDS C/W CAP SURGE DIVERTERS

149116 120A TERMINATION KIT,22KV 35MM2 OUTDOOR TERMINATION AND JOINT KITS

149117 120B TERMINATION KIT,22KV 70-240MM2 OUTDOOR TERMINATION AND JOINT KITS

149115 120C TERMINATION KIT,22KV 35-185MM2 OUTDOOR Need to build up outer sheath TERMINATION AND JOINT KITS

149115 120D TERMINATION KIT,22KV 35-185MM2 OUTDOOR TERMINATION AND JOINT KITS

236396 121A BRACKET, Z-TYPE - SIMILAR TO NGK69169 GALVANISED STEEL FOR MOUNTING BORIC ACID FUSES POLETOP STEELWORK

33744 122A BOLT,HEX HEAD M20 X 45MM GAL. C/W NUT GALVANISED STEEL GRADE 5.8 M20 TOWER BOLTS

33748 122B BOLT TOWER M20 x 65 GALVANISED STEEL GRADE 5.8 M20 TOWER BOLTS

155002 123A ROD,EARTH,ANTI-THEFT 70MM2 Copper Clad Steel

155003 123B ROD,EARTH,ANTI-THEFT 120MM2 Copper Clad Steel

Line Components Page 13-48

Overhead Distribution Construction Standard Section 13

SI No. ITEM DESCRIPTION MATERIAL REMARKS CATEGORY

348630 124B TAPE,CAUTION-BURIED ELECT CABLE 500M

Line Components Page 13-49

Overhead Distribution Construction Standard Section 13

Line Components Page 13-50

Overhead Distribution Construction Standard Section 14

14 SECTION 14 – CLEARANCES

(For details of Clearances Requirements for Service Cables, refer Section 1.7.)

14 SECTION 14 – CLEARANCES ............................................................................................................... 1

14.1 Distribution Mains Clearances from Ground and Structures ................................................... 2
14.2 Intercircuit Clearances................................................................................................................ 4
14.3 Clearances from Telecommunications Infrastructure .............................................................. 8
14.4 Clearances from Stay Wires ..................................................................................................... 11
14.5 Clearances from Streetlight Brackets ...................................................................................... 12
14.6 Vegetation Clearances .............................................................................................................. 13
14.7 Clearances over Railways ......................................................................................................... 16
14.8 Clearances from Flammable Materials .................................................................................... 18

Clearances Page 14-1

 Overhead Distribution Construction Standard Section 14

14.1 Distribution Mains Clearances from Ground and Structures

HV
HV
LV >33kV,
Dimension 1kV – 33kV
<132kV
Clearance Type Location Description Code Direction
(see 10.1.3)
Bare & Insulated Insulated Bare &
ABC BARE Covered without Earth with Earth Covered
Conductor Screen Screen Conductor
Over the carriageway Vertically 5.5m 5.5m 6.7m 6.0m 5.5m 6.7m
Roads
Over roadway other than the carriageway Vertically 5.5m 5.5m 6.7m 6.0m 5.5m 6.7m
Private driveways and land traversable by vehicles more than 3m in height
Vertically 5.5m 5.5m 6.7m 6.0m 5.5m 6.7m
Ground (except service stations and farms)
Other Areas not normally accessible to vehicles more than 3m in height
Vertically 4.5 m 4.5m 4.5 m 4.5m 4.5m 5.5m
(e.g. swampy areas, gradient > 1:1)
Cuttings, embankments and easement boundaries Horizontally 1.5m 1.5m 2.1m 2.1m 1.5m 5.5m
E Vertically 2.7m 3.7m 4.5m 3.7m 2.7m 5.0m
Unroofed terraces, balconies, sun decks, paved areas etc. that are subject (Note 1)
to pedestrian traffic only
F In any other direction 1.0m 1.5m 2.1m 1.5m 1.5m 3.0m
G Vertically 2.0m 2.7m 3.7m 2.7m 2.7m 4.5m
Roofs or similar structure not normally accessible to persons but on which (Note 1)
Structures / a person may stand
H In any other direction 1.0m 1.5m 2.1m 1.5m 1.5m 3.0m
Buildings
Covered places such as verandahs, balconies and windows which can be
I In any direction 1.0m 1.5m 2.1m 1.5m 1.5m 3.0m
opened
K Vertically 0.6m 2.7m 3.7m 2.7m 2.7m 4.5m
Parts of any structure not normally accessible to persons, incl. blank walls (Note 1)
and windows that cannot be opened
L Horizontally 0.1m 0.6m 1.5m 0.6m 0.1m 2.5m
Vertically 1.5m 1.5m 1.65m 1.65m 1.5m 3.0m
Service Poles in the vicinity of OH conductors (refer 10.2.4)
Horizontally 1.0m 2.0m 2.2m 1.5m 1.5m 3.0m
Overdimension high load transport routes Vertically 6.7m minimum for all conductors (incl. stay wires and services)
Vertically Not permitted
Other Temporary structures including scaffolding
High-Risk Horizontally 1.0m 1.5m 2.1m 2.1m 2.1m 3.0m
Situations Quarries, mines, farms etc. where activities will be in close proximity to
Subject to risk assessment
power lines (Note 3)
Vertically 5.5m 7.5m 7.5m 7.5m 7.5m 7.5m
Farms utilising irrigation
Horizontally 7.9m 7.9m 8.5m 8.5m 7.9m 13.0m
See notes on next sheet

Clearances Page 14-2

Overhead Distribution Construction Standard Section 14

Notes regarding Distribution Mains Ground and Structure Clearances table:

1. This should not be taken as meaning only the literal vertical. The actual clearance may also extend outwards in an arc until it interacts with the relevant intersecting dimension.
2. Minimum clearance values are for the following conductor conditions:
a. Maximum conductor temperature of:
i. 75⁰C for LVABC
ii. 50⁰C for bare open LV,11kV, 12.7kV &
22kV mains
iii. 50⁰C for HVABC
iv. 50⁰C for bare open 33kV mains
b. Worst condition of conductor swing - 15⁰C and
500Pa Wind load
c. Allowance to be made for inelastic stretch of
conductors following installation.
3. The above clearances are a minimum and at times a higher
clearance may be warranted. For high-risk locations where
machinery and plant are likely to operate in close proximity to
power lines a risk assessment should be conducted to
determine the most appropriate solution to minimise the risk
of contact. Examples of potential high-risk locations include
quarries, mines, farms with a need to transport tall centre
pivots or grain augers. Possible solutions to be considered
include:
a. relocation of power line to an alternate location
b. increasing clearances
c. use of an insulated conductor type
d. use of an underground cable
e. installing powerline markers or insulated
barriers/covers.
4. The clearances in the above table are for vehicles with a
maximum height of 4.6m. Vehicles exceeding 4.6m require a
permit from the Government and as part of the permit
approval process TasNetworks may be required to survey the
intended route.
5. For service cable clearance requirements refer section 1.7.

Clearances Page 14-3

Overhead Distribution Construction Standard Section 14

14.2 Intercircuit Clearances

14.2.1 Minimum Spacing Between Circuits at a Pole

Upper Circuit

HV
>33kV HV
LV Other
≤ 66kV 1kV – 33kV

Bare and covered

Bare and Conductive Non-
Bare conductor, Insulated with
covered LVABC e.g. Pilot conductive
Conductor insulated without earthed screen
conductor Cable e.g. ADSS
earthed screen
HV: 33kV > U ≤ 66kV Bare conductor 1.5m

Bare and covered conductor,

1.5m 0.92m 0.92m
insulated without earthed screen
HV: 1kV – 33kV
Lower Circuit

Insulated with earth screen 1.5m 0.92m 0.2m

Bare and covered conductor 1.8m 1.38m 1.38m 0.3m

LV
LVABC 1.8m 1.38m 1.38m 0.3m 0.3m

Conductive e.g. Pilot Cable 2.0m 2.0m 2.0m 0.3m 0.3m 0.3m 0.2m
Other
Non-conductive e.g. ADSS3 2.0m 2.0m 2.0m 0.3m 0.3m 0.3m 0.2m

Notes:
1. The clearances listed are distance between kingbolts of upper and lower circuit constructions. Consideration should be given to increasing
clearances when designing at clearance limits in situations where there is a height loss on the top circuit and/or a height gain on the lower circuit,
e.g. a strain construction or suspension construction above and a pin construction below.
2. The clearances may need to be increased to account for safe approach distances required for construction, operation or maintenance activities.
3. This is a minimum clearance for live line work practice. This dimension may be reduced to an absolute minimum of 1.2m via consultation with
TasNetworks on a case-by-case basis.

Clearances Page 14-4

Overhead Distribution Construction Standard Section 14

14.2.2 Minimum In-span Spacing between Circuits on Common Poles

Upper Circuit

HV
LV Other
1kV – 33kV

Bare or covered
Bare and Conductive Non-
conductor, Insulated with
covered LVABC e.g. Pilot conductive
insulated without earthed screen
conductor Cable e.g. ADSS
earthed screen

Bare and covered conductor,

0.5m
insulated without earthed screen
HV: 1kV – 33kV
Insulated with earthed screen 0.5m 0.3m
Lower Circuit

Bare and covered conductor 0.5m 0.38m 0.38m

LV
LVABC 0.5m 0.38m 0.3m 0.3m

Conductive e.g. Pilot Cable 0.5m 0.38m 0.38m 0.3m 0.3m 0.2m
Other
Non-conductive e.g. ADSS 1.2m 1.2m 0.3m 0.3m 0.3m 0.2m

Notes:
1. The clearances may need to be increased to account for safe approach distances required for construction, operation or maintenance activities.
2. The clearances are based on the upper circuit being at maximum operating temperature, and the lower circuit at 5⁰C.
3. Mid span clearances may need to be increased in situations where the circuit transitions from horizontal to vertical orientation.
4. Consideration should be given to local factors that may adversely affect in-span clearances including bird strike, aircraft warning devices, ice loading, use of
irrigators etc.

Clearances Page 14-5

Overhead Distribution Construction Standard Section 14

14.2.3 Minimum In-span Spacing between Circuits at Unattached Crossing

Upper Circuit

HV
HV
>33kV LV Other
1kV – 33kV
≤ 66kV
Bare and covered
Bare and Conductive Non-
Bare conductor, Insulated with
covered e.g. Pilot conductive
Conductor insulated without earthed screen
conductor Cable e.g. ADSS
earthed screen
HV: 33kV > U ≤ 66kV Bare conductor 1.8m

Bare and covered conductor,

1.8m 1.2m
insulated without earthed screen
HV: 1kV – 33kV
Lower Circuit

Insulated with earth screen 1.8m 1.2m 0.6m

LV Bare, covered and insulated 1.8m 1.2m 0.6m 0.6m

Conductive e.g. Pilot Cable 1.8m 1.2m 0.6m 0.6m 0.6m 0.4m
Other
Non-conductive e.g. ADSS 1.8m 1.2m 1.2m 0.6m 0.3m 0.3m

Notes:
1. The clearances may need to be increased to account for blowout on large spans or safe approach distances required for construction, operation or maintenance activities.
2. The clearances are based on the upper circuit being at maximum operating temperature and the lower circuit at 5⁰C.
3. In-span clearances may need to be increased in situations where the circuit transitions from horizontal to vertical orientation.
4. Consideration should be given to local factors that may adversely affect in-span clearances including bird strike, aircraft warning devices, ice loading, use of
irrigators etc.

Upper Circuit
Lower Circuit

Clearances Page 14-6

Overhead Distribution Construction Standard Section 14

14.2.4 Minimum Spacing from Inter-span Poles

Clearances Page 14-7

Overhead Distribution Design Standard Section 14

14.3 Clearances from Telecommunications Infrastructure

14.3.1 Pilot Cables Clearances from Ground and Structures

Clearance Type Location Description Direction Clearance

Over the carriageway Vertically 5.0m

Over roadway other than the carriageway Vertically 4.7m
Ground
Areas not normally accessible to vehicles Vertically 3.5m
Over commercial/industrial/farm driveways Vertically 5.0m
Unroofed terraces, balconies, sun decks, paved areas etc. that are Vertically 2.7m
subject to pedestrian traffic only Horizontally 1.0m
Roofs or similar structure not normally accessible to persons but on Vertically 2.0m
which a person may stand Horizontally 1.0m
Structures / Covered places normally accessible to persons, including for example
In any
Buildings windows capable of being opened, roofed open verandahs and covered 1.0m
direction
balconies
In any
Blank walls / windows which cannot be opened 0.6m
direction
Vertically 0.6m
Other structures not normally accessible to persons
Horizontally 0.1m

14.3.2 ADSS and Main Fibre Optic Cable (FOC) Clearances from Ground

Location Description Min. Clearance

Roads, freeways 5.5m3

Designated high load highways, freeways and truck refuelling depots 6.0m3

Private or public land parcels that vehicles or machinery may traverse (including commercial property, 5.5m
farmland and paddocks)

Commercial, farmland or designated paddock driveways (including residential access to farm properties) 5.5m

Residential driveways 4.6m

Other land not normally accessible to vehicles 4.5m

Navigable waterways or river4 12.0m

Railway Line5 5.5m

Notes:
1. For NBNCo service drop cables, refer TasNetworks TS-02 document.
2. All clearances are based on FOC temperature of 30⁰C.
3. For roadway verge the minimum requirement may be reduced to 4.6m where vehicles cannot traverse.
4. Navigable waterway to be measured at Highest Astronomical Tide for tidal waterways or full capacity for a dam or
lake.
5. Railway crossings are to be constructed with a weak link attachment to the poles on either side of the crossing.

Clearances Page 14- 8

Overhead Distribution Construction Standard Section 14

14.3.3 ADSS/FOC Clearances from Pole-Mounted Plant

Component Element Min. Clearance

HV Mains 2.0m
Transformer Top of HV Bushings 0.7m
Tank 0.2m
LV Mains 0.3m
Top of HV Bushings 2.0m
Recloser Tank 0.2m
Top of HV Bushings 2.0m
Capacitor Tank 0.2m
Regulator NOT PERMITTED ON POLE

Air break switch 2.0m

HV EDOs or Links Lowest point of fuse/link swing 1.8m

LV Links or Fuses, incl. service fuses 0.8

HV Cable Termination Point where phase cores separate 1.2m

LV Cable Termination Point where phase cores separate 0.3m

Street Light Bracket 0.23m

Stay Wires 0.15m

14.3.4 FOC Pit and FDH cabinet clearances from TasNetworks Poles

Clearances for Splice Pits

Clearances for Splice Pits and FDH from Poles with
and FDH from Poles with LV Conductors or Clearances for Haulage
Pole Type
HV Conductors or Apparatus Pits from HV & LV Poles
Apparatus

Conductive poles (steel/conc) 15m 3m 3m

Timber poles with HV earth 15m 3m 3m

attached
All other wood poles 3m 3m 3m

Clearances Page 14- 9

Overhead Distribution Construction Standard Section 14

14.3.5 Minimum Clearances from PSTN (Telephone) Cables on JU Poles

TasNetworks Poles
Distribution Network Component On Pole In Span
Bare HV Mains >33kV mains 3.0m 2.4m
Bare or Covered HV Mains ≤33kV mains 2.4m 1.8m
NMSHVABC mains 1.2m 1.2m
MSHVABC (metallic earthed screen) mains 0.6m 1.2m
Bare LV or SL mains 1.2m 1.2m
LVABC mains 0.6m 1.2m
Streetlight leads, brackets or fittings 0.05m 0.15m
Stay fittings 0.05m 0.15m
Earth downleads 0.05m

Telstra Poles
Min. 1.2m clearance between TasNetworks services and Telstra cables/equipment

14.3.6 Minimum Clearances Between Earthing and Telecommunications Plant

Clearances Page 14- 10

Overhead Distribution Construction Standard Section 14

14.4 Clearances from Stay Wires

14.4.1 Ground Clearance for Aerial Stay Wires

Situation Required Min. Clearance

Over Carriageway 5.5m
Over Private Driveways 4.6m
Other Locations 3.0m

14.4.2 Clearance from Mains to Stay Wires

Mains Type Required Min. Clearance

ADSS, Pilot Cable 0.15m
LV bare neutral, LVABC 0.15m
LV bare mains active 0.23m
HV bare or covered mains 0.46m
HVABC 0.15m
Operating Platforms 2.6m vertically

Clearances Page 14- 11

Overhead Distribution Construction Standard Section 14

14.5 Clearances from Streetlight Brackets

14.5.1 Clearance from streetlights/outreaches mounted on a distribution pole

Mains Type Required Min. Clearance

ADSS, Pilot Cable 0.23m
LV bare neutral, LVABC 0.3m
LV bare mains active 0.6m
HV bare or covered mains 1.2m
HVABC 0.3m

14.5.2 Clearance from free-standing non-frangible streetlight poles

Mains Type Required Min. Clearance

ADSS, Pilot Cable 0.1m in any direction
LV bare neutral, LVABC, Insulated Service 0.6m vertically
0.3m horizontally
LV bare mains active 1.5m vertically
0.6m horizontally
HV bare or covered mains 1.5m vertically
1.5m horizontally
HVABC 1.5m vertically
0.3m horizontally

14.5.3 Clearance from free-standing frangible streetlight poles

Situation Required Min. Clearance

Potential impact to the streetlight pole 0.6 x SL mounting height
would result in the pole falling clear of
the overhead conductors. Note 1
Potential impact to the streetlight pole 1.2 x SL mounting height
would result in the pole falling toward the
overhead conductors. Note 1
Frangible poles are not to be used in areas of high pedestrian volume (e.g. near schools, bus stops, shopping centres)

Clearances Page 14- 12

Overhead Distribution Construction Standard Section 14

14.6 Vegetation Clearances

14.6.1 Bare Conductor Vegetation Clearances

Clearances Page 14- 13

Overhead Distribution Construction Standard Section 14

14.6.2 ABC Vegetation Clearances.

Clearance to Still Cable

Voltage Clearance at Pole Centre 2/3 of Span
Span <45m Span 45 – 75m Span >75m
LV 0.6m 0.6m 1.0m Urban (~50m): 1.5m
Rural (~150m): 2.1m
HV 0.7m 0.7m 1.2m Urban (~75m): 1.8m
Rural (~150m): 3.0m

Clearances Page 14- 14

Overhead Distribution Construction Manual Section 14

14.6.3 ADSS / FOC Vegetation Clearances

Clearance to Still Cable

Clearance at Pole
Span <40m Span 40 – 70m Span >70m
0.6m 0.3m 0.6m 0.9m
Radial clearances apply – both vertical and horizontal.
Initial clearing should allow for regrowth over clearing cycle.

Clearances Page 14-15

Overhead Distribution Construction Manual Section 14

14.7 Clearances over Railways

Clearances Page 14-16

Overhead Distribution Construction Manual Section 14

Clearance over Railways Cont’d

TasNetworks shall, before undertaking work on any new crossing or rearranging an existing
crossing, consult with TasRail and obtain approval of the proposal.

Minimum Separation (m)

Col 1 Nominal Voltage of Railway Tracks Telecommunications Telecommunications
Power Conductors (Nearest Rail) Conductors/Cables Support
1 Up to 650V 5.5 0.9 By approved attachment
(Note 2)
2 Over 650V to 11kV 6.7 1.2 3.7
3 Over 11kV to 66kV 6.7 2.1 4.0
4 Over 66kV to 132kV 6.7 3.0 4.6
5 Over 132kV to 220kV 6.7 3.7 5.1

Notes:
1. Separations in column 5 apply to where Tasnetworks conductors are within a horizontal
distance of 2.4m from the vertical projection of the nearest point of a telecommunication
support.
2. Where TasNetworks LV conductors share the same pole as TasRail’s conductors, there shall
be a separation of 2.4m for bare LV or 1.8m insulated LV.

REQUIREMENTS FOR SPANS CROSSING RAILWAY INFRASTRUCTURE

1. Maximum Span Length: 120m

2. Angle of crossing: 45° - 90°
3. Minimum conductor size: 3/2.75 SC/GZ, or at least 7 strands for other materials
4. Constructions on adjacent poles: strain or suspension types
5. No tension joints or connections in crossing span
6. Poles to be:
- located at a distance equal to pole height + 2m away from track or telecommunications
conductors, OR
- stayed so that they cannot fall onto tracks or telecommunications conductors in the
event of pole base failure.

Clearances Page 14-17

Overhead Distribution Construction Manual Section 14

14.8 Clearances from Flammable Materials

Recommended Horizontal Clearance2

Hazardous Area
Minimum (Hazardous Area + Safety margin)
Safety Margin Diesel
Diesel Petrol and Petrol and
Distribution Equipment Petrol and (to be added Petrol and Storage
Storage Tanks LPG LPG
LPG Storage to Hazard LPG Storage Tanks &
& Dispensing Dispensing 1 Dispensing
Tanks Zone) Tanks Dispensing
Station Station3 Station
Station
Distribution pole or
15m 5m 8m 10m 25m 15m 18m
substation with EDO fuses
HV Links, air-break
switches, HRC fuses and 15m 3m 8m 5m 20m 8m 13m
lightning arresters
Ground type substations
15m 4m 8m 1m 16m 5m 9m
and indoor substations
LV pole with fuses, pillars
and turrets, or LV service 15m 3m 8m 1m 16m 4m 9m
fuses
Refer AS2430 Part 3 - Classification of Hazardous Areas – Specific occupancies. None of the distribution equipment listed should be
located within the recommended horizontal clearance, measured from the source of the hazard.

Notes:
1. Where the recommended minimum horizontal clearance cannot be achieved, the hazardous area may be reduced in
accordance with AS2430 Part 3 Section 9.2.4.
2. The recommended horizontal clearance indicated is the horizontal distance measured in any direction from the source of
the hazard to the boundary of the equipment installed at ground level, or centre of pole for overhead equipment.
3. The hazardous area for LPG dispensing stations is either 8m horizontally from the cabinet or 3m horizontally from the
hose nozzle, whichever is the greater.
4. a) Cylinder filling: The hazardous area for outdoor cylinder filling is 7m horizontally from the fill point.
b) Outdoor cylinder installation, in situ fill type: The hazardous area extends 10m horizontally from any cylinder valve.
The hazardous area may be reduced in accordance with AS2340 Part 3 Section 9.2.4.

Clearances Page 14-18