Bowen Cone Buster Mills Technical
Summary
Our Bowen™ Cone Buster mills are designed with a concave face that helps properly center the fish under the
mill for the most efficient milling. A thick layer of our industry-leading Bowen ItcoloyX ensures a long tool
life. Our design and ItcoloyX cutting structure effectively reduce milling times. Our mill may be used in open
and cased hole operations and are available in industry standard sizes. The mills meet NS-2 and DS-1 fishing
standards and are offered in several configurations, which include optional thread connections, and stabilizer
pads. They are available dressed or without carbide, allowing for local customization.
Applications
• Heavy milling
• Bit cones
• Slips
• Reamers
• Retainers
• Wrenches (other tools that may be lost downhole)
• Cement
Features/Benefits
• Available in sizes from 3.5 in. up to 28 in. OD
• Designs available in standardized fish neck length of 12 in.
• Available with or without integral stabilizers
• Dressed with industry–leading Bowen ItcoloyX, ensuring a long life of the tool
• Available with optional thread connections
Bowen Cone Buster Mills
Base Part Connection Alternative Mill OD Fish Neck Stabilizer
Number Connection Range Length Length
507745 2 ⅜ in. REG 2 ⅜ in. IF, 2-⅜ in. PAC 3.5 - 4.5 in. 12 in. 5 in.
507749 2 ⅞ in. REG 2 ⅜ in. IF, 2-⅞ in. IF 4.25 - 6 in. 12 in. 5 in.
507706 3 ½ in. REG 3 ½ in. IF 5 - 8.5 in. 12 in. 5 in.
507753 4 ½ in. REG 3 ½ in. IF 7 - 10.5 in. 12 in. 6 in.
507757 6 ⅝ in. REG 4 ½ in. REG 10 - 16 in. 12 in. 6 in.
507761 7 ⅝ in. REG 6 ⅝ in. REG 16 - 28 in. 12 in. 8 in. *Mills shown with optional stabilizers.
*Bowen Mill Suite is available with and without stabilizers.
[email protected] nov.com/bowen
©2018 National Oilwell Varco. All rights reserved. 10138145-400-ENG-MKT:41 Rev 02 nov.com/patents
