0% found this document useful (0 votes)
34 views92 pages

1177 01 Level 2 Floor Trusses

This document provides a summary of load and force data for Truss F1. It includes environmental details like the site elevation and wind/snow code, and building details like dimensions, roof type and enclosure status. It then lists the compression, tension, bending and critical ratio forces calculated at each node of the truss.

Uploaded by

Trà My Bùi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
34 views92 pages

1177 01 Level 2 Floor Trusses

This document provides a summary of load and force data for Truss F1. It includes environmental details like the site elevation and wind/snow code, and building details like dimensions, roof type and enclosure status. It then lists the compression, tension, bending and critical ratio forces calculated at each node of the truss.

Uploaded by

Trà My Bùi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 92

Truss F1

Environment Truss F1 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.25 0.25
Wind Code AS/NZS 1170.2 2-3 0.07 0 0.25 0.3
Code AU 3-4 0.13 0 0.25 0.34
Building Function A 4-5 0.2 0 0.21 0.38
Importance Level 2 5-6 0.25 0 0.29 0.48
6-7 0.31 0 0.18 0.46
Annual prob. of exceed. - Wind 1:500
7-8 0.35 0 0.3 0.6
Annual prob. of exceed. - Snow 1:150
8-9 0.4 0 0.18 0.52
Roof Type Hip
9 - 10 0.43 0 0.32 0.7
Building Length [m] 19.8
10 - 11 0.47 0 0.17 0.58
Building Width [m] 25.1 6,998 mm
11 - 12 0.48 0 0.33 0.77
Avg. Roof Height [m] 6.3 12 - 13 0.52 0 0.16 0.63
1 2 3 4 5 6 7 8 9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30
Enclosed? Enclosed 13 - 14 0.51 0 0.33 0.81
14 - 15 0.54 0 0.15 0.66
For complete job environment details, refer to the job
15 - 16 0.53 0 0.34 0.82
Enviroments Report.
16 - 17 0.54 0 0.15 0.66
31/32 33/34 35/36 37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 17 - 18 0.51 0 0.33 0.81
Load Summary 18 - 19 0.52 0 0.16 0.63
19 - 20 0.48 0 0.33 0.77
Load Value 20 - 21 0.47 0 0.17 0.58
Loaded Width (Actual) 237 21 - 22 0.43 0 0.32 0.7
Heel 298 mm BC 6,998 mm Heel 298 mm
Floor Dead Load (KPa) 0.63 22 - 23 0.4 0 0.18 0.52
Floor Live Load (KPa) 1.92 23 - 24 0.35 0 0.3 0.6
Floor Point Load (KPa) 1.80 24 - 25 0.31 0 0.18 0.46
Ceiling Dead Load (KPa) 0.15 25 - 26 0.25 0 0.29 0.48
Ceiling Live Load (KPa) 0.00 26 - 27 0.2 0 0.21 0.38
Ceiling Point Load (KPa) 1.10 27 - 28 0.13 0 0.25 0.34
28 - 29 0.07 0 0.25 0.3
29 - 30 0 0 0.25 0.25
Truss Summary Bottom Chord
31 - 32 0 0 0.07 0.07
Item Value
32 - 33 0 0.05 0.13 0.18
Steel 6050-G550-0.95
33 - 34 0 0.1 0.16 0.25
Width [m] 7.0 Reactions 34 - 35 0 0.15 0.16 0.31
Height [m] 0.3 35 - 36 0 0.19 0.15 0.33
Loaded Width 237 Reaction @ Node 32 Reaction @ Node 59 36 - 37 0 0.23 0.15 0.37
Purlin Spacing 250 Max. Ult 3,141 Max. Ult 3,141 37 - 38 0 0.26 0.15 0.4
Batten Spacing 600 Min. Ult 578 Min. Ult 578 38 - 39 0 0.3 0.15 0.44
BC Span [m] 7.0 39 - 40 0 0.32 0.14 0.46
Steel [m] 23.9 40 - 41 0 0.35 0.16 0.49
Weight [kg] 31.6 41 - 42 0 0.35 0.14 0.49
Max. Deflection Up 0.491 42 - 43 0 0.38 0.16 0.51
Max. Deflection Down -14.637 43 - 44 0 0.38 0.12 0.5
Max CR - Top Chord 0.82 44 - 45 0 0.4 0.16 0.52
Max CR - Bottom Chord 0.52 45 - 46 0 0.39 0.11 0.49
Status Pass 46 - 47 0 0.4 0.16 0.52
47 - 48 0 0.38 0.12 0.5
Nodes / Deflections 48 - 49 0 0.38 0.16 0.51
BC Deflections Summary 49 - 50 0 0.35 0.14 0.49
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.2 0.5 0.0 0.0 22 (5180, -34) -4.3 -10.6 0.0 0.0 43 (2966, -266) -5.8 -14.2 0.0 0.0 50 - 51 0 0.35 0.16 0.49
Maximum Limit Ratio 51 - 52 0 0.32 0.14 0.46
2 (261, -34) -0.4 -1.1 0.0 0.0 23 (5261, -34) -4.1 -10.1 0.0 0.0 44 (3048, -266) -5.8 -14.3 0.0 0.0
Dead Load -5.95 12.00 0.50 52 - 53 0 0.3 0.15 0.44
3 (343, -34) -0.7 -1.7 0.0 0.0 24 (5672, -34) -3.2 -8.0 0.0 0.0 45 (3458, -266) -5.9 -14.6 0.0 0.0
Live Load -14.64 27.20 0.54 53 - 54 0 0.26 0.15 0.4
4 (753, -34) -1.8 -4.4 0.0 0.0 25 (5753, -34) -3.0 -7.5 0.0 0.0 46 (3540, -266) -5.9 -14.6 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0 0.23 0.15 0.37
5 (835, -34) -2.0 -5.0 0.0 0.0 26 (6164, -34) -2.0 -5.0 0.0 0.0 47 (3950, -266) -5.8 -14.3 0.0 0.0
6 (1245, -34) -3.0 -7.5 0.0 0.0 27 (6245, -34) -1.8 -4.4 0.0 0.0 48 (4032, -266) -5.8 -14.2 0.0 0.0 55 - 56 0 0.19 0.15 0.33
7 (1326, -34) -3.2 -8.0 0.0 0.0 28 (6655, -34) -0.7 -1.7 0.0 0.0 49 (4442, -266) -5.4 -13.3 0.0 0.0 56 - 57 0 0.15 0.16 0.31
8 (1737, -34) -4.1 -10.1 0.0 0.0 29 (6737, -34) -0.4 -1.1 0.0 0.0 50 (4523, -266) -5.3 -13.1 0.0 0.0 57 - 58 0 0.1 0.16 0.25
9 (1818, -34) -4.3 -10.6 0.0 0.0 30 (6972, -34) 0.2 0.5 0.0 0.0 51 (4934, -266) -4.7 -11.6 0.0 0.0 58 - 59 0 0.05 0.13 0.18
10 (2229, -34) -5.0 -12.3 0.0 0.0 31 (26, -266) 0.2 0.5 0.0 0.0 52 (5015, -266) -4.6 -11.3 0.0 0.0 59 - 60 0 0 0.07 0.07
Webs
11 (2310, -34) -5.1 -12.6 0.0 0.0 32 (99, -266) 0.0 0.0 0.0 0.0 53 (5426, -266) -3.8 -9.3 0.0 0.0
12 (2721, -34) -5.6 -13.7 0.0 0.0 33 (507, -266) -1.1 -2.8 0.0 0.0 54 (5507, -266) -3.6 -8.9 0.0 0.0 31 - 1 0.02 0.02 0 0.03
13 (2802, -34) -5.7 -13.9 0.0 0.0 34 (588, -266) -1.4 -3.4 0.0 0.0 55 (5918, -266) -2.7 -6.5 0.0 0.0 60 - 30 0.02 0.02 0 0.03
14 (3213, -34) -5.9 -14.5 0.0 0.0 35 (999, -266) -2.4 -6.0 0.0 0.0 56 (5999, -266) -2.4 -6.0 0.0 0.0 32 - 2 0.12 0 0.01 0.13
15 (3294, -34) -5.9 -14.6 0.0 0.0 36 (1080, -266) -2.7 -6.5 0.0 0.0 57 (6410, -266) -1.4 -3.4 0.0 0.0 3 - 33 0 0.12 0.01 0.12
16 (3704, -34) -5.9 -14.6 0.0 0.0 37 (1491, -266) -3.6 -8.9 0.0 0.0 58 (6491, -266) -1.1 -2.8 0.0 0.0 34 - 4 0.12 0 0.01 0.12
17 (3786, -34) -5.9 -14.5 0.0 0.0 38 (1572, -266) -3.8 -9.3 0.0 0.0 59 (6900, -266) 0.0 0.0 0.0 0.0 5 - 35 0 0.12 0.01 0.12
18 (4196, -34) -5.7 -13.9 0.0 0.0 39 (1983, -266) -4.6 -11.3 0.0 0.0 60 (6972, -266) 0.2 0.5 0.0 0.0 36 - 6 0.11 0 0.01 0.11
19 (4278, -34) -5.6 -13.7 0.0 0.0 40 (2064, -266) -4.7 -11.6 0.0 0.0 7 - 37 0 0.1 0.01 0.11
20 (4688, -34) -5.1 -12.6 0.0 0.0 41 (2475, -266) -5.3 -13.1 0.0 0.0 38 - 8 0.09 0.01 0.01 0.1
21 (4769, -34) -5.0 -12.3 0.0 0.0 42 (2556, -266) -5.4 -13.3 0.0 0.0 9 - 39 0.01 0.09 0.01 0.1

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F1 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
40 - 10 0.08 0.02 0.01 0.09
11 - 41 0.02 0.08 0.01 0.08
42 - 12 0.07 0.03 0 0.07
13 - 43 0.03 0.07 0 0.07
44 - 14 0.06 0.04 0 0.06
15 - 45 0.05 0.05 0 0.06
46 - 16 0.05 0.05 0 0.06
17 - 47 0.06 0.04 0 0.06
48 - 18 0.03 0.07 0 0.07
19 - 49 0.07 0.03 0 0.07
50 - 20 0.02 0.08 0.01 0.08
21 - 51 0.08 0.02 0.01 0.09
52 - 22 0.01 0.09 0.01 0.1
23 - 53 0.09 0.01 0.01 0.1
54 - 24 0 0.1 0.01 0.11
25 - 55 0.11 0 0.01 0.11
56 - 26 0 0.12 0.01 0.12
27 - 57 0.12 0 0.01 0.12
58 - 28 0 0.12 0.01 0.12
29 - 59 0.12 0 0.01 0.13

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F2
Identical Trusses
Environment Truss F2
F2 F3 F4 F5
Site Data F6 F7 F8
Elevation ASL [m] 10
Building Data 7 Identical Trusses
Wind Code AS/NZS 1170.2
Code AU Forces
Building Function A
Importance Level 2 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Wind 1:500 Top Chord
Annual prob. of exceed. - Snow 1:150 1-2 0 0 0.27 0.27
Roof Type Hip 2-3 0.11 0 0.27 0.34
Building Length [m] 19.8 3-4 0.2 0 0.26 0.38
Building Width [m] 25.1 6,998 mm 4-5 0.31 0 0.24 0.51
Avg. Roof Height [m] 6.3 5-6 0.4 0 0.3 0.61
1 2 3 4 5 6 7 8 9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30 6-7 0.49 0 0.22 0.68
Enclosed? Enclosed
7-8 0.56 0 0.31 0.76
For complete job environment details, refer to the job 8-9 0.63 0 0.22 0.81
Enviroments Report. 9 - 10 0.68 0 0.33 0.88
10 - 11 0.73 0 0.2 0.9
31/32 33/34 35/36 37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 11 - 12 0.77 0 0.35 0.95
Load Summary 12 - 13 0.8 0 0.18 0.96
13 - 14 0.82 0 0.35 0.99
Load Value
14 - 15 0.84 0 0.17 0.97
Loaded Width (Actual) 406
Heel 298 mm BC 6,998 mm Heel 298 mm 15 - 16 0.84 0 0.36 1
Floor Dead Load (KPa) 0.63
16 - 17 0.84 0 0.17 0.97
Floor Live Load (KPa) 1.92 17 - 18 0.82 0 0.35 0.99
Floor Point Load (KPa) 1.80 18 - 19 0.8 0 0.18 0.96
Ceiling Dead Load (KPa) 0.15 19 - 20 0.77 0 0.35 0.95
Ceiling Live Load (KPa) 0.00 20 - 21 0.73 0 0.2 0.9
Ceiling Point Load (KPa) 1.10 21 - 22 0.68 0 0.33 0.88
22 - 23 0.63 0 0.22 0.81
Truss Summary 23 - 24 0.56 0 0.31 0.76
24 - 25 0.49 0 0.22 0.68
Item Value 25 - 26 0.4 0 0.3 0.61
Steel 6050-G550-0.95 26 - 27 0.31 0 0.24 0.51
27 - 28 0.2 0 0.26 0.38
Width [m] 7.0 Reactions 28 - 29 0.11 0 0.27 0.34
Height [m] 0.3
29 - 30 0 0 0.27 0.27
Loaded Width 406 Reaction @ Node 32 Reaction @ Node 59
Bottom Chord
Purlin Spacing 250 Max. Ult 5,381 Max. Ult 5,381
31 - 32 0 0 0.07 0.08
Batten Spacing 600 Min. Ult 990 Min. Ult 990
32 - 33 0 0.08 0.16 0.24
BC Span [m] 7.0
33 - 34 0 0.15 0.26 0.41
Steel [m] 23.9 34 - 35 0 0.23 0.26 0.49
Weight [kg] 31.6 35 - 36 0 0.29 0.22 0.51
Max. Deflection Up 0.841 36 - 37 0 0.36 0.22 0.58
Max. Deflection Down -25.074 37 - 38 0 0.41 0.21 0.62
Max CR - Top Chord 1.00 38 - 39 0 0.46 0.21 0.67
Max CR - Bottom Chord 0.76 39 - 40 0 0.5 0.19 0.69
Status Pass 40 - 41 0 0.54 0.19 0.73
Nodes / Deflections 41 - 42 0 0.57 0.17 0.73
42 - 43 0 0.59 0.17 0.76
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 43 - 44 0 0.6 0.14 0.74
Maximum Limit Ratio 1 (26, -34) 0.3 0.8 0.0 0.0 22 (5180, -34) -7.3 -18.1 0.0 0.0 43 (2966, -266) -9.9 -24.3 0.0 0.0 44 - 45 0 0.62 0.18 0.76
2 (261, -34) -0.8 -1.9 0.0 0.0 23 (5261, -34) -7.1 -17.4 0.0 0.0 44 (3048, -266) -10.0 -24.6 0.0 0.0 45 - 46 0 0.62 0.12 0.72
Dead Load -10.19 12.00 0.85
3 (343, -34) -1.2 -2.9 0.0 0.0 24 (5672, -34) -5.6 -13.7 0.0 0.0 45 (3458, -266) -10.2 -25.1 0.0 0.0 46 - 47 0 0.62 0.18 0.76
Live Load -25.07 27.20 0.92
4 (753, -34) -3.1 -7.6 0.0 0.0 25 (5753, -34) -5.2 -12.8 0.0 0.0 46 (3540, -266) -10.2 -25.1 0.0 0.0 47 - 48 0 0.6 0.14 0.74
Dead Load 0.00 0.00 0.00
5 (835, -34) -3.5 -8.6 0.0 0.0 26 (6164, -34) -3.5 -8.6 0.0 0.0 47 (3950, -266) -10.0 -24.6 0.0 0.0 48 - 49 0 0.59 0.17 0.76
6 (1245, -34) -5.2 -12.8 0.0 0.0 27 (6245, -34) -3.1 -7.6 0.0 0.0 48 (4032, -266) -9.9 -24.3 0.0 0.0 49 - 50 0 0.57 0.17 0.73
7 (1326, -34) -5.6 -13.7 0.0 0.0 28 (6655, -34) -1.2 -2.9 0.0 0.0 49 (4442, -266) -9.3 -22.8 0.0 0.0 50 - 51 0 0.54 0.19 0.73
8 (1737, -34) -7.1 -17.4 0.0 0.0 29 (6737, -34) -0.8 -1.9 0.0 0.0 50 (4523, -266) -9.1 -22.4 0.0 0.0 51 - 52 0 0.5 0.19 0.69
9 (1818, -34) -7.3 -18.1 0.0 0.0 30 (6972, -34) 0.3 0.8 0.0 0.0 51 (4934, -266) -8.1 -19.9 0.0 0.0 52 - 53 0 0.46 0.21 0.67
10 (2229, -34) -8.5 -21.0 0.0 0.0 31 (26, -266) 0.3 0.8 0.0 0.0 52 (5015, -266) -7.8 -19.3 0.0 0.0 53 - 54 0 0.41 0.21 0.62
11 (2310, -34) -8.7 -21.5 0.0 0.0 32 (99, -266) 0.0 0.0 0.0 0.0 53 (5426, -266) -6.5 -16.0 0.0 0.0 54 - 55 0 0.36 0.22 0.58
12 (2721, -34) -9.6 -23.5 0.0 0.0 33 (507, -266) -1.9 -4.8 0.0 0.0 54 (5507, -266) -6.2 -15.2 0.0 0.0 55 - 56 0 0.29 0.22 0.51
13 (2802, -34) -9.7 -23.8 0.0 0.0 34 (588, -266) -2.3 -5.8 0.0 0.0 55 (5918, -266) -4.5 -11.2 0.0 0.0 56 - 57 0 0.23 0.26 0.49
14 (3213, -34) -10.1 -24.9 0.0 0.0 35 (999, -266) -4.2 -10.3 0.0 0.0 56 (5999, -266) -4.2 -10.3 0.0 0.0 57 - 58 0 0.15 0.26 0.41
15 (3294, -34) -10.1 -25.0 0.0 0.0 36 (1080, -266) -4.5 -11.2 0.0 0.0 57 (6410, -266) -2.3 -5.8 0.0 0.0 58 - 59 0 0.08 0.16 0.24
16 (3704, -34) -10.1 -25.0 0.0 0.0 37 (1491, -266) -6.2 -15.2 0.0 0.0 58 (6491, -266) -1.9 -4.8 0.0 0.0 59 - 60 0 0 0.07 0.08
17 (3786, -34) -10.1 -24.9 0.0 0.0 38 (1572, -266) -6.5 -16.0 0.0 0.0 59 (6900, -266) 0.0 0.0 0.0 0.0 Webs
18 (4196, -34) -9.7 -23.8 0.0 0.0 39 (1983, -266) -7.8 -19.3 0.0 0.0 60 (6972, -266) 0.3 0.8 0.0 0.0 31 - 1 0.02 0.02 0 0.02
19 (4278, -34) -9.6 -23.5 0.0 0.0 40 (2064, -266) -8.1 -19.9 0.0 0.0 60 - 30 0.02 0.02 0 0.02
20 (4688, -34) -8.7 -21.5 0.0 0.0 41 (2475, -266) -9.1 -22.4 0.0 0.0 32 - 2 0.18 0 0.01 0.19
21 (4769, -34) -8.5 -21.0 0.0 0.0 42 (2556, -266) -9.3 -22.8 0.0 0.0 3 - 33 0 0.17 0.01 0.18

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F2 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
34 - 4 0.18 0 0.01 0.19
5 - 35 0 0.16 0.01 0.17
36 - 6 0.15 0 0.01 0.16
7 - 37 0 0.12 0.01 0.13
38 - 8 0.12 0 0.01 0.12
9 - 39 0 0.1 0.01 0.11
40 - 10 0.09 0.01 0.01 0.1
11 - 41 0.01 0.09 0.01 0.09
42 - 12 0.08 0.02 0 0.08
13 - 43 0.03 0.07 0 0.07
44 - 14 0.06 0.04 0 0.06
15 - 45 0.04 0.06 0 0.06
46 - 16 0.04 0.06 0 0.06
17 - 47 0.06 0.04 0 0.06
48 - 18 0.03 0.07 0 0.07
19 - 49 0.08 0.02 0 0.08
50 - 20 0.01 0.09 0.01 0.09
21 - 51 0.09 0.01 0.01 0.1
52 - 22 0 0.1 0.01 0.11
23 - 53 0.12 0 0.01 0.12
54 - 24 0 0.12 0.01 0.13
25 - 55 0.15 0 0.01 0.16
56 - 26 0 0.16 0.01 0.17
27 - 57 0.18 0 0.01 0.19
58 - 28 0 0.17 0.01 0.18
29 - 59 0.18 0 0.01 0.19

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F9
Identical Trusses
Environment Truss F9
F9 F10
Site Data
Elevation ASL [m] 10 2 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.27 0.27
Annual prob. of exceed. - Snow 1:150 2-3 0.1 0 0.27 0.33
Roof Type Hip 3-4 0.19 0 0.26 0.36
Building Length [m] 19.8 4-5 0.29 0 0.23 0.48
Building Width [m] 25.1 6,998 mm 5-6 0.38 0 0.29 0.58
6-7 0.46 0 0.21 0.64
Avg. Roof Height [m] 6.3
1 2 3 4 5 6 7 8 9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30 7-8 0.53 0 0.31 0.72
Enclosed? Enclosed
8-9 0.6 0 0.21 0.77
For complete job environment details, refer to the job 9 - 10 0.65 0 0.33 0.83
Enviroments Report. 10 - 11 0.7 0 0.19 0.86
11 - 12 0.73 0 0.34 0.9
31/32 33/34 35/36 37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 12 - 13 0.76 0 0.18 0.91
Load Summary 13 - 14 0.78 0 0.35 0.94
14 - 15 0.8 0 0.17 0.92
Load Value
15 - 16 0.8 0 0.35 0.95
Loaded Width (Actual) 386
Heel 298 mm BC 6,998 mm Heel 298 mm 16 - 17 0.8 0 0.17 0.92
Floor Dead Load (KPa) 0.63 17 - 18 0.78 0 0.35 0.94
Floor Live Load (KPa) 1.92 18 - 19 0.76 0 0.18 0.91
Floor Point Load (KPa) 1.80 19 - 20 0.73 0 0.34 0.9
Ceiling Dead Load (KPa) 0.15 20 - 21 0.7 0 0.19 0.86
Ceiling Live Load (KPa) 0.00 21 - 22 0.65 0 0.33 0.83
Ceiling Point Load (KPa) 1.10 22 - 23 0.6 0 0.21 0.77
23 - 24 0.53 0 0.31 0.72
24 - 25 0.46 0 0.21 0.64
Truss Summary
25 - 26 0.38 0 0.29 0.58
Item Value 26 - 27 0.29 0 0.23 0.48
Steel 6050-G550-0.95 27 - 28 0.19 0 0.26 0.36
28 - 29 0.1 0 0.27 0.33
Width [m] 7.0 Reactions 29 - 30 0 0 0.27 0.27
Height [m] 0.3
Bottom Chord
Loaded Width 386 Reaction @ Node 32 Reaction @ Node 59
31 - 32 0 0 0.07 0.08
Purlin Spacing 250 Max. Ult 5,116 Max. Ult 5,116
32 - 33 0 0.07 0.15 0.23
Batten Spacing 600 Min. Ult 941 Min. Ult 941
33 - 34 0 0.14 0.25 0.39
BC Span [m] 7.0 34 - 35 0 0.22 0.25 0.46
Steel [m] 23.9 35 - 36 0 0.28 0.21 0.49
Weight [kg] 31.6 36 - 37 0 0.34 0.21 0.55
Max. Deflection Up 0.799 37 - 38 0 0.39 0.2 0.59
Max. Deflection Down -23.839 38 - 39 0 0.44 0.2 0.64
Max CR - Top Chord 0.95 39 - 40 0 0.48 0.18 0.66
Max CR - Bottom Chord 0.72 40 - 41 0 0.51 0.18 0.69
Status Pass 41 - 42 0 0.54 0.16 0.7
Nodes / Deflections 42 - 43 0 0.56 0.17 0.72
43 - 44 0 0.58 0.14 0.71
BC Deflections Summary 44 - 45 0 0.59 0.17 0.72
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.3 0.8 0.0 0.0 22 (5180, -34) -7.0 -17.2 0.0 0.0 43 (2966, -266) -9.4 -23.1 0.0 0.0 45 - 46 0 0.59 0.12 0.69
Maximum Limit Ratio
2 (261, -34) -0.7 -1.8 0.0 0.0 23 (5261, -34) -6.7 -16.5 0.0 0.0 44 (3048, -266) -9.5 -23.3 0.0 0.0 46 - 47 0 0.59 0.17 0.72
Dead Load -9.68 12.00 0.81
3 (343, -34) -1.1 -2.7 0.0 0.0 24 (5672, -34) -5.3 -13.0 0.0 0.0 45 (3458, -266) -9.7 -23.8 0.0 0.0 47 - 48 0 0.58 0.14 0.71
Live Load -23.84 27.20 0.88
4 (753, -34) -2.9 -7.2 0.0 0.0 25 (5753, -34) -5.0 -12.2 0.0 0.0 46 (3540, -266) -9.7 -23.8 0.0 0.0 48 - 49 0 0.56 0.17 0.72
Dead Load 0.00 0.00 0.00
5 (835, -34) -3.3 -8.1 0.0 0.0 26 (6164, -34) -3.3 -8.1 0.0 0.0 47 (3950, -266) -9.5 -23.3 0.0 0.0 49 - 50 0 0.54 0.16 0.7
6 (1245, -34) -5.0 -12.2 0.0 0.0 27 (6245, -34) -2.9 -7.2 0.0 0.0 48 (4032, -266) -9.4 -23.1 0.0 0.0 50 - 51 0 0.51 0.18 0.69
7 (1326, -34) -5.3 -13.0 0.0 0.0 28 (6655, -34) -1.1 -2.7 0.0 0.0 49 (4442, -266) -8.8 -21.7 0.0 0.0 51 - 52 0 0.48 0.18 0.66
8 (1737, -34) -6.7 -16.5 0.0 0.0 29 (6737, -34) -0.7 -1.8 0.0 0.0 50 (4523, -266) -8.7 -21.3 0.0 0.0 52 - 53 0 0.44 0.2 0.64
9 (1818, -34) -7.0 -17.2 0.0 0.0 30 (6972, -34) 0.3 0.8 0.0 0.0 51 (4934, -266) -7.7 -18.9 0.0 0.0 53 - 54 0 0.39 0.2 0.59
10 (2229, -34) -8.1 -20.0 0.0 0.0 31 (26, -266) 0.3 0.8 0.0 0.0 52 (5015, -266) -7.5 -18.4 0.0 0.0 54 - 55 0 0.34 0.21 0.55
11 (2310, -34) -8.3 -20.4 0.0 0.0 32 (99, -266) 0.0 0.0 0.0 0.0 53 (5426, -266) -6.2 -15.2 0.0 0.0 55 - 56 0 0.28 0.21 0.49
12 (2721, -34) -9.1 -22.4 0.0 0.0 33 (507, -266) -1.8 -4.5 0.0 0.0 54 (5507, -266) -5.9 -14.5 0.0 0.0 56 - 57 0 0.22 0.25 0.46
13 (2802, -34) -9.2 -22.7 0.0 0.0 34 (588, -266) -2.2 -5.5 0.0 0.0 55 (5918, -266) -4.3 -10.6 0.0 0.0 57 - 58 0 0.14 0.25 0.39
14 (3213, -34) -9.6 -23.6 0.0 0.0 35 (999, -266) -4.0 -9.8 0.0 0.0 56 (5999, -266) -4.0 -9.8 0.0 0.0 58 - 59 0 0.07 0.15 0.23
15 (3294, -34) -9.6 -23.7 0.0 0.0 36 (1080, -266) -4.3 -10.6 0.0 0.0 57 (6410, -266) -2.2 -5.5 0.0 0.0 59 - 60 0 0 0.07 0.08
16 (3704, -34) -9.6 -23.7 0.0 0.0 37 (1491, -266) -5.9 -14.5 0.0 0.0 58 (6491, -266) -1.8 -4.5 0.0 0.0 Webs
17 (3786, -34) -9.6 -23.6 0.0 0.0 38 (1572, -266) -6.2 -15.2 0.0 0.0 59 (6900, -266) 0.0 0.0 0.0 0.0 31 - 1 0.02 0.02 0 0.02
18 (4196, -34) -9.2 -22.7 0.0 0.0 39 (1983, -266) -7.5 -18.4 0.0 0.0 60 (6972, -266) 0.3 0.8 0.0 0.0 60 - 30 0.02 0.02 0 0.02
19 (4278, -34) -9.1 -22.4 0.0 0.0 40 (2064, -266) -7.7 -18.9 0.0 0.0 32 - 2 0.18 0 0.01 0.18
20 (4688, -34) -8.3 -20.4 0.0 0.0 41 (2475, -266) -8.6 -21.3 0.0 0.0 3 - 33 0 0.16 0.01 0.17
21 (4769, -34) -8.1 -20.0 0.0 0.0 42 (2556, -266) -8.8 -21.7 0.0 0.0 34 - 4 0.17 0 0.01 0.18

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F9 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
5 - 35 0 0.15 0.01 0.16
36 - 6 0.14 0 0.01 0.15
7 - 37 0 0.12 0.01 0.12
38 - 8 0.11 0 0.01 0.12
9 - 39 0 0.1 0.01 0.11
40 - 10 0.09 0.01 0.01 0.09
11 - 41 0.02 0.09 0.01 0.09
42 - 12 0.07 0.03 0 0.08
13 - 43 0.03 0.07 0 0.07
44 - 14 0.06 0.04 0 0.06
15 - 45 0.04 0.06 0 0.06
46 - 16 0.04 0.06 0 0.06
17 - 47 0.06 0.04 0 0.06
48 - 18 0.03 0.07 0 0.07
19 - 49 0.07 0.03 0 0.08
50 - 20 0.02 0.09 0.01 0.09
21 - 51 0.09 0.01 0.01 0.09
52 - 22 0 0.1 0.01 0.11
23 - 53 0.11 0 0.01 0.12
54 - 24 0 0.12 0.01 0.12
25 - 55 0.14 0 0.01 0.15
56 - 26 0 0.15 0.01 0.16
27 - 57 0.17 0 0.01 0.18
58 - 28 0 0.16 0.01 0.17
29 - 59 0.18 0 0.01 0.18

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F75

Environment Truss F75 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0.02 0.01 0.13 0.13
Code AU 3-4 0.01 0.02 0.23 0.25
Building Function A 4-5 0.02 0.01 0.12 0.13
Importance Level 2 5-6 0.01 0.02 0.23 0.25
6-7 0.02 0 0.12 0.13
Annual prob. of exceed. - Wind 1:500
7-8 0.01 0.02 0.23 0.25
Annual prob. of exceed. - Snow 1:150
2,796 mm 8-9 0.02 0 0.12 0.13
Roof Type Hip
9 - 10 0.01 0.02 0.23 0.25
Building Length [m] 19.8
10 - 11 0.03 0 0.12 0.13
Building Width [m] 25.1 1 2 3 4 5 6 7 8 9 10 11 12 13 14
11 - 12 0.03 0.02 0.23 0.25
Avg. Roof Height [m] 6.3 12 - 13 0.04 0 0.14 0.17
Enclosed? Enclosed 13 - 14 0 0 0.29 0.29
Bottom Chord
For complete job environment details, refer to the job
15 - 16 0 0 0.07 0.09
Enviroments Report.
16 - 17 0.01 0.01 0.14 0.15
17 - 18 0.03 0 0.09 0.12
Load Summary 18 - 19 0.01 0.01 0.14 0.14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 19 - 20 0.03 0.01 0.09 0.12
Load Value 20 - 21 0.01 0.01 0.14 0.14
Loaded Width (Actual) 403 21 - 22 0.03 0.01 0.09 0.11
Floor Dead Load (KPa) 0.63 22 - 23 0.01 0.01 0.14 0.14
Floor Live Load (KPa) 1.92 23 - 24 0.03 0.01 0.09 0.11
Heel 283 mm BC 2,796 mm Heel 283 mm
Floor Point Load (KPa) 1.80 24 - 25 0.01 0.01 0.14 0.14
Ceiling Dead Load (KPa) 0.15 25 - 26 0.03 0.02 0.09 0.11
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.02 0.12 0.14
Ceiling Point Load (KPa) 1.10 27 - 28 0 0 0.09 0.11
Webs
15 - 1 0.05 0.01 0 0.06
Truss Summary 28 - 14 0.04 0 0 0.05
16 - 2 0.04 0.01 0 0.04
Item Value
3 - 17 0.07 0.01 0.01 0.08
Steel 6050-G550-0.75
18 - 4 0.06 0.01 0.01 0.07
Width [m] 2.8 Reactions 5 - 19 0.07 0.01 0.01 0.08
Height [m] 0.3 20 - 6 0.06 0.01 0.01 0.06
Loaded Width 403 Reaction @ Node 15 Reaction @ Node 17 Reaction @ Node 19 Reaction @ Node 21 Reaction @ Node 23 Reaction @ Node 25 Reaction @ Node 27 Reaction @ Node 28 7 - 21 0.07 0.01 0.01 0.08
Purlin Spacing 250 Max. Ult 255 Max. Ult 697 Max. Ult 646 Max. Ult 648 Max. Ult 661 Max. Ult 653 Max. Ult 440 Max. Ult 220 22 - 8 0.06 0.01 0.01 0.06
Batten Spacing 600 Min. Ult 45 Min. Ult 131 Min. Ult 118 Min. Ult 119 Min. Ult 121 Min. Ult 120 Min. Ult 85 Min. Ult 37 9 - 23 0.07 0.01 0.01 0.08
BC Span [m] 2.8 24 - 10 0.06 0.01 0.01 0.06
Steel [m] 9.8 11 - 25 0.07 0.02 0.01 0.08
Weight [kg] 10.2 26 - 12 0.06 0.01 0.01 0.06
Max. Deflection Up 0.100 13 - 27 0.07 0.01 0.01 0.08
Max. Deflection Down -0.004
Max CR - Top Chord 0.29
Max CR - Bottom Chord 0.15
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1352, -251) 0.0 0.0 0.0 0.0
2 (225, -34) 0.0 0.0 0.0 0.0 23 (1689, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 1.36 0.00
3 (306, -34) 0.0 0.0 0.0 0.0 24 (1770, -251) 0.0 0.0 0.0 0.0
Live Load 0.00 1.72 0.00
4 (643, -34) 0.0 0.0 0.0 0.0 25 (2107, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (724, -34) 0.0 0.0 0.0 0.0 26 (2188, -251) 0.0 0.0 0.0 0.0
6 (1061, -34) 0.0 0.0 0.0 0.0 27 (2537, -251) 0.0 0.0 0.0 0.0
7 (1143, -34) 0.0 0.0 0.0 0.0 28 (2770, -251) 0.0 0.0 0.0 0.0
8 (1480, -34) 0.0 0.0 0.0 0.0
9 (1561, -34) 0.0 0.0 0.0 0.0
10 (1898, -34) 0.0 0.0 0.0 0.0
11 (1979, -34) 0.0 0.0 0.0 0.0
12 (2317, -34) 0.0 0.0 0.0 0.0
13 (2398, -34) 0.0 0.0 0.0 0.0
14 (2770, -34) 0.0 0.0 0.0 0.0
15 (26, -251) 0.0 0.0 0.0 0.0
16 (99, -251) 0.0 0.0 0.0 0.0
17 (434, -251) 0.0 0.0 0.0 0.0
18 (515, -251) 0.0 0.0 0.0 0.0
19 (852, -251) 0.0 0.0 0.0 0.0
20 (933, -251) 0.0 0.0 0.0 0.0
21 (1270, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F76
Identical Trusses
Environment Truss F76
F76 F77 F78 F79
Site Data F80 F81 F82 F83
Elevation ASL [m] 10 F84 F85
Building Data
Wind Code AS/NZS 1170.2 10 Identical Trusses
Code AU
Building Function A Forces
Importance Level 2
Annual prob. of exceed. - Wind 1:500 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Snow 1:150 Top Chord
Roof Type Hip 1-2 0 0 0.26 0.26
Building Length [m] 19.8 4,332 mm 2-3 0.09 0 0.26 0.33
Building Width [m] 25.1 3-4 0.16 0 0.39 0.49
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 4-5 0.22 0 0.22 0.4
Enclosed? Enclosed 5-6 0.22 0 0.37 0.54
6-7 0.26 0 0.16 0.36
For complete job environment details, refer to the job 7-8 0.22 0 0.37 0.54
Enviroments Report. 8-9 0.22 0 0.22 0.4
9 - 10 0.16 0 0.37 0.48
10 - 11 0.13 0.01 0.28 0.37
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
11 - 12 0.05 0.02 0.33 0.36
12 - 13 0.02 0.04 0.3 0.3
Load Value
13 - 14 0 0.08 0.3 0.3
Loaded Width (Actual) 406
14 - 15 0.03 0.07 0.23 0.25
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,332 mm Heel 283 mm 15 - 16 0.07 0.06 0.32 0.36
Floor Live Load (KPa) 1.92
16 - 17 0.12 0.04 0.2 0.27
Floor Point Load (KPa) 1.80 17 - 18 0.11 0.03 0.32 0.4
Ceiling Dead Load (KPa) 0.15 18 - 19 0.13 0.02 0.16 0.25
Ceiling Live Load (KPa) 0.00 19 - 20 0.09 0.01 0.31 0.36
Ceiling Point Load (KPa) 1.10 20 - 21 0.06 0.01 0.23 0.27
21 - 22 0 0 0.23 0.23
Truss Summary Bottom Chord
23 - 24 0 0 0.32 0.38
Item Value 24 - 25 0 0.05 0.32 0.37
Steel 6050-G550-0.75 25 - 26 0 0.09 0.17 0.26
26 - 27 0 0.13 0.18 0.26
Width [m] 4.3 Reactions 27 - 28 0 0.13 0.11 0.23
Height [m] 0.3
28 - 29 0 0.15 0.18 0.26
Loaded Width 406 Reaction @ Node 1 Reaction @ Node 35 Reaction @ Node 43
29 - 30 0 0.13 0.12 0.23
Purlin Spacing 250 Max. Ult 1,718 Max. Ult 4,190 Max. Ult 723
30 - 31 0 0.13 0.18 0.27
Batten Spacing 600 Min. Ult 316 Min. Ult 771 Min. Ult 133
31 - 32 0 0.09 0.17 0.25
BC Span [m] 4.3
32 - 33 0.02 0.08 0.21 0.28
Steel [m] 15.3
33 - 34 0.04 0.03 0.22 0.24
Weight [kg] 15.9 34 - 35 0.08 0.01 0.18 0.21
Max. Deflection Up 0.011 35 - 36 0.15 0 0.18 0.23
Max. Deflection Down -0.744 36 - 37 0.12 0.02 0.18 0.19
Max CR - Top Chord 0.54 37 - 38 0.1 0.04 0.15 0.18
Max CR - Bottom Chord 0.38 38 - 39 0.08 0.07 0.16 0.21
Status Pass 39 - 40 0.06 0.07 0.09 0.14
Nodes / Deflections 40 - 41 0.04 0.07 0.16 0.19
41 - 42 0.02 0.05 0.12 0.17
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 42 - 43 0.01 0.03 0.13 0.15
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (4306, -34) 0.0 0.0 0.0 0.0 43 (4234, -251) 0.0 0.0 0.0 0.0 43 - 44 0 0 0.12 0.12
2 (235, -34) -0.1 -0.2 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4306, -251) 0.0 0.0 0.0 0.0 Webs
Dead Load -0.30 8.87 0.03
3 (317, -34) -0.1 -0.3 0.0 0.0 24 (99, -251) -0.1 -0.1 0.0 0.0 23 - 1 0 0.09 0.01 0.1
Live Load -0.74 10.64 0.07
4 (675, -34) -0.2 -0.6 0.0 0.0 25 (455, -251) -0.2 -0.4 0.0 0.0 44 - 22 0.04 0.02 0 0.05
Dead Load 0.00 0.00 0.00
5 (757, -34) -0.3 -0.6 0.0 0.0 26 (537, -251) -0.2 -0.5 0.0 0.0 24 - 2 0.17 0 0.02 0.18
6 (1115, -34) -0.3 -0.7 0.0 0.0 27 (895, -251) -0.3 -0.7 0.0 0.0 3 - 25 0 0.11 0.01 0.13
7 (1197, -34) -0.3 -0.7 0.0 0.0 28 (977, -251) -0.3 -0.7 0.0 0.0 26 - 4 0.12 0 0.01 0.13
8 (1555, -34) -0.3 -0.7 0.0 0.0 29 (1335, -251) -0.3 -0.7 0.0 0.0 5 - 27 0.03 0.07 0.01 0.07
9 (1637, -34) -0.3 -0.7 0.0 0.0 30 (1417, -251) -0.3 -0.7 0.0 0.0 28 - 6 0.07 0.04 0.01 0.07
10 (1995, -34) -0.2 -0.5 0.0 0.0 31 (1775, -251) -0.3 -0.6 0.0 0.0 7 - 29 0.08 0.04 0.01 0.08
11 (2077, -34) -0.2 -0.4 0.0 0.0 32 (1857, -251) -0.2 -0.6 0.0 0.0 30 - 8 0.03 0.07 0.01 0.08
12 (2438, -34) -0.1 -0.2 0.0 0.0 33 (2215, -251) -0.1 -0.3 0.0 0.0 9 - 31 0.12 0.01 0.01 0.13
13 (2517, -34) 0.0 -0.1 0.0 0.0 34 (2297, -251) -0.1 -0.2 0.0 0.0 32 - 10 0 0.11 0.01 0.12
14 (2905, -34) 0.0 0.0 0.0 0.0 35 (2686, -251) 0.0 0.0 0.0 0.0 11 - 33 0.16 0 0.02 0.18
15 (2985, -34) 0.0 0.0 0.0 0.0 36 (2766, -251) 0.0 0.0 0.0 0.0 34 - 12 0 0.12 0.01 0.13
16 (3286, -34) 0.0 -0.1 0.0 0.0 37 (3095, -251) 0.0 0.0 0.0 0.0 13 - 35 0.16 0 0.02 0.17
17 (3367, -34) 0.0 -0.1 0.0 0.0 38 (3176, -251) 0.0 -0.1 0.0 0.0 36 - 14 0.14 0 0.01 0.15
18 (3666, -34) 0.0 -0.1 0.0 0.0 39 (3476, -251) 0.0 -0.1 0.0 0.0 15 - 37 0 0.1 0.01 0.11
19 (3747, -34) 0.0 -0.1 0.0 0.0 40 (3556, -251) 0.0 -0.1 0.0 0.0 38 - 16 0.11 0 0.01 0.12
20 (4045, -34) 0.0 0.0 0.0 0.0 41 (3856, -251) 0.0 -0.1 0.0 0.0 17 - 39 0.03 0.06 0.01 0.06
21 (4127, -34) 0.0 0.0 0.0 0.0 42 (3936, -251) 0.0 0.0 0.0 0.0 40 - 18 0.05 0.04 0 0.05

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F76 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
19 - 41 0.08 0.03 0.01 0.09
42 - 20 0.03 0.07 0.01 0.08
21 - 43 0.13 0.02 0.01 0.14

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F86

Environment Truss F86 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.23 0.23
Wind Code AS/NZS 1170.2 2-3 0.08 0 0.23 0.29
Code AU 3-4 0.13 0 0.36 0.45
Building Function A 4-5 0.18 0 0.19 0.33
Importance Level 2 5-6 0.17 0 0.34 0.47
6-7 0.19 0 0.17 0.32
Annual prob. of exceed. - Wind 1:500
7-8 0.15 0 0.34 0.45
Annual prob. of exceed. - Snow 1:150
8-9 0.14 0 0.25 0.34
Roof Type Hip
9 - 10 0.07 0.01 0.33 0.39
Building Length [m] 19.8 4,332 mm 10 - 11 0.04 0.02 0.26 0.28
Building Width [m] 25.1
11 - 12 0 0.05 0.26 0.29
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
12 - 13 0.02 0.05 0.14 0.14
Enclosed? Enclosed 13 - 14 0 0.04 0.27 0.28
14 - 15 0.04 0.02 0.25 0.27
For complete job environment details, refer to the job
15 - 16 0.05 0.01 0.3 0.33
Enviroments Report.
16 - 17 0.11 0.01 0.21 0.29
17 - 18 0.12 0 0.35 0.44
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 18 - 19 0.14 0 0.17 0.27
19 - 20 0.1 0 0.33 0.4
Load Value 20 - 21 0.07 0 0.25 0.3
Loaded Width (Actual) 406 21 - 22 0 0 0.25 0.25
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,332 mm Heel 283 mm Bottom Chord
Floor Live Load (KPa) 1.92 23 - 24 0 0 0.3 0.36
Floor Point Load (KPa) 1.80 24 - 25 0 0.04 0.3 0.34
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.08 0.16 0.23
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.1 0.17 0.23
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.1 0.09 0.18
28 - 29 0 0.11 0.17 0.23
29 - 30 0 0.09 0.14 0.21
Truss Summary 30 - 31 0 0.08 0.17 0.25
31 - 32 0.01 0.04 0.18 0.22
Item Value
32 - 33 0.03 0.02 0.18 0.19
Steel 6050-G550-0.75
33 - 34 0.09 0 0.21 0.26
Width [m] 4.3 Reactions 34 - 35 0.08 0.01 0.21 0.26
Height [m] 0.3 35 - 36 0.06 0 0.12 0.14
Loaded Width 406 Reaction @ Node 1 Reaction @ Node 34 Reaction @ Node 37 Reaction @ Node 44 36 - 37 0.04 0.02 0.2 0.22
Purlin Spacing 250 Max. Ult 1,371 Max. Ult 2,996 Max. Ult 1,137 Max. Ult 1,127 37 - 38 0.04 0.02 0.2 0.22
Batten Spacing 600 Min. Ult 252 Min. Ult 551 Min. Ult 210 Min. Ult 207 38 - 39 0.02 0.03 0.18 0.22
BC Span [m] 4.3 39 - 40 0.01 0.07 0.18 0.25
Steel [m] 15.3 40 - 41 0.01 0.07 0.1 0.16
Weight [kg] 15.9 41 - 42 0 0.08 0.17 0.21
Max. Deflection Up 0.017 42 - 43 0 0.06 0.11 0.17
Max. Deflection Down -0.380 43 - 44 0 0.04 0.14 0.16
Max CR - Top Chord 0.47 44 - 45 0 0 0.12 0.12
Max CR - Bottom Chord 0.36 Webs
Status Pass 23 - 1 0 0.09 0.01 0.09
45 - 22 0.04 0.02 0 0.05
Nodes / Deflections 24 - 2 0.16 0 0.02 0.17
BC Deflections Summary 3 - 25 0 0.1 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4306, -34) 0.0 0.0 0.0 0.0 43 (3891, -251) 0.0 -0.1 0.0 0.0 26 - 4 0.1 0 0.01 0.11
Maximum Limit Ratio 5 - 27 0.04 0.05 0.01 0.06
2 (219, -34) -0.1 -0.1 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4234, -251) 0.0 0.0 0.0 0.0
Dead Load -0.15 7.10 0.02 28 - 6 0.05 0.05 0.01 0.05
3 (300, -34) -0.1 -0.2 0.0 0.0 24 (99, -251) 0.0 -0.1 0.0 0.0 45 (4306, -251) 0.0 0.0 0.0 0.0
Live Load -0.38 8.52 0.04 7 - 29 0.09 0.02 0.01 0.1
4 (625, -34) -0.1 -0.3 0.0 0.0 25 (421, -251) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00 30 - 8 0.01 0.09 0.01 0.1
5 (706, -34) -0.1 -0.4 0.0 0.0 26 (503, -251) -0.1 -0.3 0.0 0.0
6 (1031, -34) -0.2 -0.4 0.0 0.0 27 (828, -251) -0.2 -0.4 0.0 0.0 9 - 31 0.14 0 0.01 0.15
7 (1112, -34) -0.2 -0.4 0.0 0.0 28 (909, -251) -0.2 -0.4 0.0 0.0 32 - 10 0 0.12 0.01 0.13
8 (1437, -34) -0.1 -0.3 0.0 0.0 29 (1234, -251) -0.1 -0.4 0.0 0.0 11 - 33 0.16 0 0.01 0.17
9 (1518, -34) -0.1 -0.3 0.0 0.0 30 (1315, -251) -0.1 -0.3 0.0 0.0 34 - 12 0.09 0 0.01 0.1
10 (1845, -34) -0.1 -0.2 0.0 0.0 31 (1640, -251) -0.1 -0.3 0.0 0.0 13 - 35 0.03 0.02 0 0.03
11 (1925, -34) 0.0 -0.1 0.0 0.0 32 (1721, -251) -0.1 -0.2 0.0 0.0 36 - 14 0.1 0 0.01 0.11
12 (2318, -34) 0.0 0.0 0.0 0.0 33 (2076, -251) 0.0 -0.1 0.0 0.0 15 - 38 0.02 0.07 0.01 0.08
13 (2398, -34) 0.0 0.0 0.0 0.0 34 (2157, -251) 0.0 0.0 0.0 0.0 39 - 16 0.11 0 0.01 0.12
14 (2745, -34) 0.0 0.0 0.0 0.0 35 (2532, -251) 0.0 0.0 0.0 0.0 17 - 40 0.01 0.06 0.01 0.07
15 (2826, -34) 0.0 0.0 0.0 0.0 36 (2613, -251) 0.0 0.0 0.0 0.0 41 - 18 0.05 0.03 0.01 0.06
16 (3171, -34) 0.0 -0.1 0.0 0.0 37 (2721, -251) 0.0 0.0 0.0 0.0 19 - 42 0.08 0.01 0.01 0.09
17 (3252, -34) -0.1 -0.1 0.0 0.0 38 (2958, -251) 0.0 -0.1 0.0 0.0 43 - 20 0.02 0.07 0.01 0.08
18 (3597, -34) -0.1 -0.1 0.0 0.0 39 (3039, -251) 0.0 -0.1 0.0 0.0 21 - 44 0.13 0 0.01 0.14
19 (3678, -34) -0.1 -0.1 0.0 0.0 40 (3384, -251) -0.1 -0.1 0.0 0.0
20 (4022, -34) 0.0 -0.1 0.0 0.0 41 (3465, -251) -0.1 -0.1 0.0 0.0
21 (4104, -34) 0.0 0.0 0.0 0.0 42 (3809, -251) 0.0 -0.1 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F87
Identical Trusses
Environment Truss F87
F87 F88 F89
Site Data
Elevation ASL [m] 10 3 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.23 0.23
Annual prob. of exceed. - Snow 1:150 2-3 0.08 0 0.23 0.29
Roof Type Hip 3-4 0.13 0 0.36 0.45
Building Length [m] 19.8 4,332 mm 4-5 0.18 0 0.19 0.34
Building Width [m] 25.1 5-6 0.18 0 0.34 0.47
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 6-7 0.2 0.01 0.17 0.32
Avg. Roof Height [m] 6.3
7-8 0.16 0.02 0.34 0.46
Enclosed? Enclosed
8-9 0.14 0.02 0.24 0.34
For complete job environment details, refer to the job 9 - 10 0.08 0.03 0.33 0.39
Enviroments Report. 10 - 11 0.04 0.04 0.26 0.28
11 - 12 0 0.06 0.27 0.29
12 - 13 0.03 0.05 0.27 0.28
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
13 - 14 0.06 0.04 0.32 0.36
14 - 15 0.13 0.03 0.25 0.33
Load Value
15 - 16 0.15 0.02 0.35 0.46
Loaded Width (Actual) 406
16 - 17 0.19 0.01 0.18 0.32
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,332 mm Heel 283 mm 17 - 18 0.17 0.01 0.36 0.48
Floor Live Load (KPa) 1.92 18 - 19 0.17 0 0.19 0.33
Floor Point Load (KPa) 1.80 19 - 20 0.12 0 0.34 0.41
Ceiling Dead Load (KPa) 0.15 20 - 21 0.07 0 0.27 0.33
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.27 0.27
Ceiling Point Load (KPa) 1.10 Bottom Chord
23 - 24 0 0 0.3 0.36
24 - 25 0 0.04 0.3 0.34
Truss Summary
25 - 26 0 0.08 0.16 0.23
Item Value 26 - 27 0 0.11 0.17 0.23
Steel 6050-G550-0.75 27 - 28 0.01 0.1 0.09 0.18
28 - 29 0.02 0.11 0.17 0.23
Width [m] 4.3 Reactions 29 - 30 0.03 0.09 0.13 0.21
Height [m] 0.3
30 - 31 0.04 0.08 0.17 0.25
Loaded Width 406 Reaction @ Node 1 Reaction @ Node 34 Reaction @ Node 43
31 - 32 0.06 0.04 0.18 0.22
Purlin Spacing 250 Max. Ult 1,291 Max. Ult 3,986 Max. Ult 1,354
32 - 33 0.08 0.02 0.18 0.19
Batten Spacing 600 Min. Ult 237 Min. Ult 733 Min. Ult 249
33 - 34 0.1 0 0.21 0.26
BC Span [m] 4.3 34 - 35 0.08 0.02 0.21 0.26
Steel [m] 15.3 35 - 36 0.07 0.03 0.19 0.22
Weight [kg] 15.9 36 - 37 0.05 0.08 0.19 0.26
Max. Deflection Up 0.029 37 - 38 0.03 0.09 0.14 0.21
Max. Deflection Down -0.344 38 - 39 0.02 0.11 0.17 0.23
Max CR - Top Chord 0.48 39 - 40 0.01 0.1 0.1 0.18
Max CR - Bottom Chord 0.36 40 - 41 0.01 0.1 0.17 0.24
Status Pass 41 - 42 0 0.07 0.14 0.21
Nodes / Deflections 42 - 43 0 0.04 0.14 0.16
43 - 44 0 0 0.12 0.12
BC Deflections Summary Webs
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4306, -34) 0.0 0.0 0.0 0.0 43 (4234, -251) 0.0 0.0 0.0 0.0 23 - 1 0 0.09 0.01 0.09
Maximum Limit Ratio
2 (219, -34) -0.1 -0.1 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4306, -251) 0.0 0.0 0.0 0.0 44 - 22 0.04 0.02 0 0.05
Dead Load -0.14 7.10 0.02
3 (300, -34) -0.1 -0.2 0.0 0.0 24 (99, -251) 0.0 -0.1 0.0 0.0 24 - 2 0.16 0 0.02 0.17
Live Load -0.34 8.52 0.04
4 (625, -34) -0.1 -0.3 0.0 0.0 25 (421, -251) -0.1 -0.2 0.0 0.0 3 - 25 0 0.11 0.01 0.12
Dead Load 0.00 0.00 0.00
5 (706, -34) -0.1 -0.3 0.0 0.0 26 (503, -251) -0.1 -0.3 0.0 0.0 26 - 4 0.1 0 0.01 0.11
6 (1031, -34) -0.1 -0.3 0.0 0.0 27 (828, -251) -0.1 -0.3 0.0 0.0 5 - 27 0.04 0.06 0.01 0.06
7 (1112, -34) -0.1 -0.3 0.0 0.0 28 (909, -251) -0.1 -0.3 0.0 0.0 28 - 6 0.05 0.05 0.01 0.06
8 (1437, -34) -0.1 -0.3 0.0 0.0 29 (1234, -251) -0.1 -0.3 0.0 0.0 7 - 29 0.09 0.02 0.01 0.1
9 (1518, -34) -0.1 -0.3 0.0 0.0 30 (1315, -251) -0.1 -0.3 0.0 0.0 30 - 8 0.01 0.09 0.01 0.09
10 (1845, -34) -0.1 -0.1 0.0 0.0 31 (1640, -251) -0.1 -0.2 0.0 0.0 9 - 31 0.14 0 0.01 0.15
11 (1925, -34) 0.0 -0.1 0.0 0.0 32 (1721, -251) -0.1 -0.2 0.0 0.0 32 - 10 0 0.12 0.01 0.13
12 (2318, -34) 0.0 0.0 0.0 0.0 33 (2076, -251) 0.0 0.0 0.0 0.0 11 - 33 0.16 0 0.01 0.17
13 (2398, -34) 0.0 -0.1 0.0 0.0 34 (2157, -251) 0.0 0.0 0.0 0.0 34 - 12 0.14 0 0.01 0.15
14 (2745, -34) -0.1 -0.2 0.0 0.0 35 (2532, -251) 0.0 -0.1 0.0 0.0 13 - 35 0 0.1 0.01 0.11
15 (2826, -34) -0.1 -0.2 0.0 0.0 36 (2613, -251) -0.1 -0.1 0.0 0.0 36 - 14 0.14 0 0.01 0.15
16 (3171, -34) -0.1 -0.3 0.0 0.0 37 (2958, -251) -0.1 -0.2 0.0 0.0 15 - 37 0 0.09 0.01 0.1
17 (3252, -34) -0.1 -0.3 0.0 0.0 38 (3039, -251) -0.1 -0.3 0.0 0.0 38 - 16 0.09 0.02 0.01 0.1
18 (3597, -34) -0.1 -0.2 0.0 0.0 39 (3384, -251) -0.1 -0.3 0.0 0.0 17 - 39 0.05 0.04 0.01 0.06
19 (3678, -34) -0.1 -0.2 0.0 0.0 40 (3465, -251) -0.1 -0.3 0.0 0.0 40 - 18 0.03 0.06 0.01 0.06
20 (4022, -34) 0.0 -0.1 0.0 0.0 41 (3809, -251) -0.1 -0.2 0.0 0.0 19 - 41 0.1 0.01 0.01 0.11
21 (4104, -34) 0.0 -0.1 0.0 0.0 42 (3891, -251) -0.1 -0.1 0.0 0.0 42 - 20 0.01 0.09 0.01 0.09

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F87 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
21 - 43 0.14 0 0.01 0.15

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F90
Identical Trusses
Environment Truss F90
F90 F91
Site Data
Elevation ASL [m] 10 2 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.19 0.19
Annual prob. of exceed. - Snow 1:150 2-3 0.02 0 0.11 0.13
Roof Type Hip 3-4 0.01 0.02 0.23 0.25
Building Length [m] 19.8 4,332 mm 4-5 0.03 0 0.13 0.13
Building Width [m] 25.1 5-6 0.01 0.02 0.23 0.25
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 6-7 0.02 0 0.13 0.13
Avg. Roof Height [m] 6.3
7-8 0.01 0.02 0.23 0.25
Enclosed? Enclosed
8-9 0.03 0.01 0.16 0.16
For complete job environment details, refer to the job 9 - 10 0.01 0.03 0.26 0.29
Enviroments Report. 10 - 11 0.02 0.01 0.16 0.17
11 - 12 0.02 0.01 0.19 0.2
12 - 13 0.03 0 0.09 0.1
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
13 - 14 0.01 0.02 0.24 0.25
14 - 15 0.02 0 0.13 0.13
Load Value
15 - 16 0.01 0.02 0.24 0.25
Loaded Width (Actual) 240
16 - 17 0.02 0 0.12 0.13
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,332 mm Heel 283 mm 17 - 18 0.01 0.02 0.24 0.25
Floor Live Load (KPa) 1.92 18 - 19 0.02 0.01 0.12 0.13
Floor Point Load (KPa) 1.80 19 - 20 0.01 0.02 0.23 0.25
Ceiling Dead Load (KPa) 0.15 20 - 21 0.02 0.01 0.13 0.13
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.19 0.19
Ceiling Point Load (KPa) 1.10 Bottom Chord
23 - 24 0 0 0.1 0.12
24 - 25 0.01 0.01 0.21 0.21
Truss Summary
25 - 26 0.03 0 0.1 0.12
Item Value 26 - 27 0.01 0.01 0.14 0.15
Steel 6050-G550-0.75 27 - 28 0.03 0 0.09 0.11
28 - 29 0 0.01 0.14 0.14
Width [m] 4.3 Reactions 29 - 30 0.03 0.01 0.09 0.12
Height [m] 0.3
30 - 31 0.01 0.02 0.12 0.13
Loaded Width 240 Reaction @ Node 23 Reaction @ Node 26 Reaction @ Node 28 Reaction @ Node 30 Reaction @ Node 31 Reaction @ Node 32 Reaction @ Node 34 Reaction @ Node 36
31 - 32 0.05 0.01 0.09 0.09
Purlin Spacing 250 Max. Ult 172 Max. Ult 498 Max. Ult 378 Max. Ult 300 Max. Ult 214 Max. Ult 285 Max. Ult 291 Max. Ult 435
32 - 33 0.01 0.01 0.1 0.11
Batten Spacing 600 Min. Ult 31 Min. Ult 93 Min. Ult 69 Min. Ult 56 Min. Ult 41 Min. Ult 47 Min. Ult 58 Min. Ult 79
33 - 34 0.01 0.01 0.1 0.11
BC Span [m] 4.3 34 - 35 0.01 0.02 0.15 0.15
Steel [m] 15.3 35 - 36 0.03 0.01 0.09 0.11
Weight [kg] 16.0 36 - 37 0.01 0.01 0.14 0.14
Reaction @ Node 38 Reaction @ Node 40 Reaction @ Node 42 Reaction @ Node 44
Max. Deflection Up 0.100 37 - 38 0.03 0.01 0.09 0.11
Max. Ult 381 Max. Ult 391 Max. Ult 420 Max. Ult 154
Max. Deflection Down -0.005 38 - 39 0.01 0.01 0.14 0.14
Min. Ult 70 Min. Ult 71 Min. Ult 79 Min. Ult 27
Max CR - Top Chord 0.29 39 - 40 0.03 0.01 0.09 0.12
Max CR - Bottom Chord 0.21 40 - 41 0.01 0.01 0.14 0.14
Status Pass 41 - 42 0.03 0 0.09 0.12
Nodes / Deflections 42 - 43 0.01 0.01 0.14 0.15
43 - 44 0 0 0.07 0.09
BC Deflections Summary Webs
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4306, -34) 0.0 0.0 0.0 0.0 43 (4234, -251) 0.0 0.0 0.0 0.0 23 - 1 0.05 0 0 0.06
Maximum Limit Ratio
2 (226, -34) 0.0 0.0 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4306, -251) 0.0 0.0 0.0 0.0 44 - 22 0.05 0.01 0 0.05
Dead Load 0.00 1.64 0.00
3 (308, -34) 0.0 0.0 0.0 0.0 24 (99, -251) 0.0 0.0 0.0 0.0 24 - 2 0.04 0.01 0 0.05
Live Load -0.01 1.97 0.00
4 (648, -34) 0.0 0.0 0.0 0.0 25 (437, -251) 0.0 0.0 0.0 0.0 3 - 25 0.06 0 0.01 0.07
Dead Load 0.00 0.00 0.00
5 (729, -34) 0.0 0.0 0.0 0.0 26 (518, -251) 0.0 0.0 0.0 0.0 26 - 4 0.07 0.01 0.01 0.08
6 (1070, -34) 0.0 0.0 0.0 0.0 27 (859, -251) 0.0 0.0 0.0 0.0 5 - 27 0.06 0.01 0.01 0.06
7 (1151, -34) 0.0 0.0 0.0 0.0 28 (940, -251) 0.0 0.0 0.0 0.0 28 - 6 0.07 0.01 0.01 0.08
8 (1493, -34) 0.0 0.0 0.0 0.0 29 (1280, -251) 0.0 0.0 0.0 0.0 7 - 29 0.06 0.01 0.01 0.07
9 (1573, -34) 0.0 0.0 0.0 0.0 30 (1362, -251) 0.0 0.0 0.0 0.0 30 - 8 0.08 0.01 0.01 0.08
10 (1992, -34) 0.0 0.0 0.0 0.0 31 (1733, -251) 0.0 0.0 0.0 0.0 9 - 31 0.09 0.01 0.01 0.09
11 (2065, -34) 0.0 0.0 0.0 0.0 32 (1813, -251) 0.0 0.0 0.0 0.0 32 - 10 0.09 0.01 0.01 0.1
12 (2326, -34) 0.0 0.0 0.0 0.0 33 (2065, -251) 0.0 0.0 0.0 0.0 33 - 11 0.06 0.01 0.01 0.07
13 (2404, -34) 0.0 0.0 0.0 0.0 34 (2138, -251) 0.0 0.0 0.0 0.0 34 - 12 0.07 0.01 0.01 0.07
14 (2751, -34) 0.0 0.0 0.0 0.0 35 (2538, -251) 0.0 0.0 0.0 0.0 13 - 35 0.06 0.01 0.01 0.06
15 (2832, -34) 0.0 0.0 0.0 0.0 36 (2620, -251) 0.0 0.0 0.0 0.0 36 - 14 0.07 0.01 0.01 0.08
16 (3175, -34) 0.0 0.0 0.0 0.0 37 (2963, -251) 0.0 0.0 0.0 0.0 15 - 37 0.06 0.01 0.01 0.06
17 (3256, -34) 0.0 0.0 0.0 0.0 38 (3044, -251) 0.0 0.0 0.0 0.0 38 - 16 0.07 0.01 0.01 0.08
18 (3599, -34) 0.0 0.0 0.0 0.0 39 (3387, -251) 0.0 0.0 0.0 0.0 17 - 39 0.06 0.01 0.01 0.06
19 (3680, -34) 0.0 0.0 0.0 0.0 40 (3468, -251) 0.0 0.0 0.0 0.0 40 - 18 0.07 0.01 0.01 0.08
20 (4023, -34) 0.0 0.0 0.0 0.0 41 (3811, -251) 0.0 0.0 0.0 0.0 19 - 41 0.06 0.01 0.01 0.06
21 (4105, -34) 0.0 0.0 0.0 0.0 42 (3892, -251) 0.0 0.0 0.0 0.0 42 - 20 0.07 0.01 0.01 0.08

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F90 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
21 - 43 0.04 0.02 0 0.04

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F92
Identical Trusses
Environment Truss F92
F92 F93 F94 F95
Site Data F96 F97 F98 F99
Elevation ASL [m] 10 F100 F101 F102 F103
Building Data F104
Wind Code AS/NZS 1170.2
Code AU 13 Identical Trusses
Building Function A
Importance Level 2 Forces
Annual prob. of exceed. - Wind 1:500
Annual prob. of exceed. - Snow 1:150 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Roof Type Hip 3,198 mm Top Chord
Building Length [m] 19.8 1-2 0 0 0.32 0.32
Building Width [m] 25.1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2-3 0.12 0 0.32 0.41
Avg. Roof Height [m] 6.3 3-4 0.22 0 0.43 0.58
Enclosed? Enclosed 4-5 0.3 0 0.26 0.52
5-6 0.33 0 0.44 0.7
For complete job environment details, refer to the job 6-7 0.39 0 0.19 0.53
Enviroments Report. 7-8 0.37 0 0.45 0.76
8-9 0.39 0 0.19 0.53
9 - 10 0.33 0 0.44 0.7
Load Summary 10 - 11 0.3 0 0.26 0.52
15 16 17 18 19 20 21 22 23 24 25 26 27 28
11 - 12 0.22 0 0.43 0.58
Load Value
12 - 13 0.12 0 0.32 0.41
Loaded Width (Actual) 403
13 - 14 0 0 0.32 0.32
Floor Dead Load (KPa) 0.63
Bottom Chord
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,198 mm Heel 283 mm
15 - 16 0 0 0.35 0.42
Floor Point Load (KPa) 1.80
16 - 17 0 0.07 0.35 0.42
Ceiling Dead Load (KPa) 0.15 17 - 18 0 0.13 0.2 0.32
Ceiling Live Load (KPa) 0.00 18 - 19 0 0.18 0.21 0.32
Ceiling Point Load (KPa) 1.10 19 - 20 0 0.19 0.14 0.33
20 - 21 0 0.23 0.22 0.36
Truss Summary 21 - 22 0 0.22 0.1 0.3
22 - 23 0 0.23 0.22 0.36
Item Value 23 - 24 0 0.19 0.14 0.33
Steel 6050-G550-0.75 24 - 25 0 0.18 0.21 0.32
25 - 26 0 0.13 0.2 0.32
Width [m] 3.2 Reactions
Height [m] 0.3 26 - 27 0 0.07 0.35 0.42
Loaded Width 403 27 - 28 0 0 0.35 0.42
Reaction @ Node 15 Reaction @ Node 28
Webs
Purlin Spacing 250 Max. Ult 2,419 Max. Ult 2,419
15 - 1 0.04 0.02 0 0.05
Batten Spacing 600 Min. Ult 445 Min. Ult 445
28 - 14 0.04 0.02 0 0.05
BC Span [m] 3.2
16 - 2 0.2 0 0.02 0.21
Steel [m] 10.9
3 - 17 0 0.14 0.02 0.15
Weight [kg] 11.3
18 - 4 0.15 0 0.01 0.16
Max. Deflection Up 0.100 5 - 19 0.02 0.09 0.01 0.1
Max. Deflection Down -1.951 20 - 6 0.1 0.03 0.01 0.11
Max CR - Top Chord 0.76 7 - 21 0.06 0.06 0.01 0.06
Max CR - Bottom Chord 0.42 22 - 8 0.06 0.06 0.01 0.06
Status Pass 9 - 23 0.1 0.03 0.01 0.11
Nodes / Deflections 24 - 10 0.02 0.09 0.01 0.1
BC Deflections Summary 11 - 25 0.15 0 0.01 0.16
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 26 - 12 0 0.14 0.02 0.15
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1639, -251) -0.8 -2.0 0.0 0.0 13 - 27 0.2 0 0.02 0.21
2 (273, -34) -0.2 -0.5 0.0 0.0 23 (2073, -251) -0.7 -1.8 0.0 0.0
Dead Load -0.79 10.49 0.08
3 (354, -34) -0.3 -0.7 0.0 0.0 24 (2154, -251) -0.7 -1.7 0.0 0.0
Live Load -1.95 12.58 0.16
4 (787, -34) -0.6 -1.4 0.0 0.0 25 (2587, -251) -0.5 -1.2 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (868, -34) -0.6 -1.5 0.0 0.0 26 (2668, -251) -0.4 -1.0 0.0 0.0
6 (1301, -34) -0.8 -1.9 0.0 0.0 27 (3099, -251) -0.1 -0.2 0.0 0.0
7 (1382, -34) -0.8 -1.9 0.0 0.0 28 (3172, -251) 0.0 0.0 0.0 0.0
8 (1816, -34) -0.8 -1.9 0.0 0.0
9 (1897, -34) -0.8 -1.9 0.0 0.0
10 (2330, -34) -0.6 -1.5 0.0 0.0
11 (2411, -34) -0.6 -1.4 0.0 0.0
12 (2844, -34) -0.3 -0.7 0.0 0.0
13 (2925, -34) -0.2 -0.5 0.0 0.0
14 (3172, -34) 0.0 0.0 0.0 0.0
15 (26, -251) 0.0 0.0 0.0 0.0
16 (98, -251) -0.1 -0.2 0.0 0.0
17 (530, -251) -0.4 -1.0 0.0 0.0
18 (611, -251) -0.5 -1.2 0.0 0.0
19 (1044, -251) -0.7 -1.7 0.0 0.0
20 (1125, -251) -0.7 -1.8 0.0 0.0
21 (1558, -251) -0.8 -2.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F105

Environment Truss F105 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.31 0.31
Wind Code AS/NZS 1170.2 2-3 0.12 0 0.31 0.4
Code AU 3-4 0.21 0 0.43 0.57
Building Function A 4-5 0.29 0 0.26 0.51
Importance Level 2 5-6 0.32 0 0.43 0.69
6-7 0.38 0 0.19 0.52
Annual prob. of exceed. - Wind 1:500
7-8 0.36 0 0.45 0.75
Annual prob. of exceed. - Snow 1:150
8-9 0.38 0 0.19 0.52
Roof Type Hip 3,198 mm 9 - 10 0.32 0 0.43 0.69
Building Length [m] 19.8
10 - 11 0.29 0 0.26 0.51
Building Width [m] 25.1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 11 - 12 0.21 0 0.43 0.57
Avg. Roof Height [m] 6.3 12 - 13 0.12 0 0.31 0.4
Enclosed? Enclosed 13 - 14 0 0 0.31 0.31
Bottom Chord
For complete job environment details, refer to the job
15 - 16 0 0 0.34 0.41
Enviroments Report.
16 - 17 0 0.07 0.34 0.41
17 - 18 0 0.12 0.19 0.31
Load Summary 18 - 19 0 0.17 0.2 0.31
15 16 17 18 19 20 21 22 23 24 25 26 27 28
19 - 20 0 0.19 0.13 0.32
Load Value 20 - 21 0 0.22 0.21 0.35
Loaded Width (Actual) 335 21 - 22 0 0.21 0.1 0.3
Floor Dead Load (KPa) 0.63 22 - 23 0 0.22 0.21 0.35
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,198 mm Heel 283 mm 23 - 24 0 0.19 0.13 0.32
Floor Point Load (KPa) 1.80 24 - 25 0 0.17 0.2 0.31
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.12 0.19 0.31
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.07 0.34 0.41
Ceiling Point Load (KPa) 1.10 27 - 28 0 0 0.34 0.41
Webs
15 - 1 0.04 0.02 0 0.05
Truss Summary 28 - 14 0.04 0.02 0 0.05
16 - 2 0.19 0 0.02 0.21
Item Value
3 - 17 0 0.13 0.02 0.14
Steel 6050-G550-0.75
18 - 4 0.14 0 0.01 0.15
Width [m] 3.2 Reactions 5 - 19 0.02 0.09 0.01 0.1
Height [m] 0.3 20 - 6 0.1 0.03 0.01 0.11
Loaded Width 335 Reaction @ Node 15 Reaction @ Node 28 7 - 21 0.06 0.06 0.01 0.06
Purlin Spacing 250 Max. Ult 2,011 Max. Ult 2,011 22 - 8 0.06 0.06 0.01 0.06
Batten Spacing 600 Min. Ult 370 Min. Ult 370 9 - 23 0.1 0.03 0.01 0.11
BC Span [m] 3.2 24 - 10 0.02 0.09 0.01 0.1
Steel [m] 10.9 11 - 25 0.14 0 0.01 0.15
Weight [kg] 11.3 26 - 12 0 0.13 0.02 0.15
Max. Deflection Up 0.100 13 - 27 0.19 0 0.02 0.21
Max. Deflection Down -1.621
Max CR - Top Chord 0.75
Max CR - Bottom Chord 0.41
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1639, -251) -0.7 -1.6 0.0 0.0
2 (273, -34) -0.2 -0.4 0.0 0.0 23 (2073, -251) -0.6 -1.5 0.0 0.0
Dead Load -0.66 10.49 0.06
3 (354, -34) -0.2 -0.6 0.0 0.0 24 (2154, -251) -0.6 -1.4 0.0 0.0
Live Load -1.62 12.58 0.13
4 (787, -34) -0.5 -1.2 0.0 0.0 25 (2587, -251) -0.4 -1.0 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (868, -34) -0.5 -1.3 0.0 0.0 26 (2668, -251) -0.3 -0.8 0.0 0.0
6 (1301, -34) -0.6 -1.6 0.0 0.0 27 (3099, -251) -0.1 -0.2 0.0 0.0
7 (1382, -34) -0.6 -1.6 0.0 0.0 28 (3172, -251) 0.0 0.0 0.0 0.0
8 (1816, -34) -0.6 -1.6 0.0 0.0
9 (1897, -34) -0.6 -1.6 0.0 0.0
10 (2330, -34) -0.5 -1.3 0.0 0.0
11 (2411, -34) -0.5 -1.2 0.0 0.0
12 (2844, -34) -0.2 -0.6 0.0 0.0
13 (2925, -34) -0.2 -0.4 0.0 0.0
14 (3172, -34) 0.0 0.0 0.0 0.0
15 (26, -251) 0.0 0.0 0.0 0.0
16 (98, -251) -0.1 -0.2 0.0 0.0
17 (530, -251) -0.3 -0.8 0.0 0.0
18 (611, -251) -0.4 -1.0 0.0 0.0
19 (1044, -251) -0.6 -1.4 0.0 0.0
20 (1125, -251) -0.6 -1.5 0.0 0.0
21 (1558, -251) -0.7 -1.6 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F106
Identical Trusses
Environment Truss F106
F106 F107 F108 F109
Site Data F110 F111 F112 F113
Elevation ASL [m] 10 F114 F115 F116 F117
Building Data
Wind Code AS/NZS 1170.2 12 Identical Trusses
Code AU
Building Function A Forces
Importance Level 2
Annual prob. of exceed. - Wind 1:500
1,744 mm Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Snow 1:150 Top Chord
Roof Type Hip 1 2 3 4 5 6 7 8 9 1-2 0 0 0.26 0.26
Building Length [m] 19.8 2-3 0.09 0 0.26 0.32
Building Width [m] 25.1 3-4 0.14 0 0.39 0.49
Avg. Roof Height [m] 6.3 4-5 0.19 0 0.19 0.33
Enclosed? Enclosed 5-6 0.16 0 0.37 0.49
6-7 0.15 0 0.25 0.36
For complete job environment details, refer to the job 7-8 0.08 0 0.43 0.47
Enviroments Report. 8-9 0 0 0.26 0.26
Bottom Chord
10 - 11 0 0 0.29 0.34
Load Summary 11 - 12 0 0.05 0.29 0.34
12 - 13 0 0.08 0.13 0.21
Load Value
10 11 12 13 14 15 16 17 18 13 - 14 0 0.11 0.18 0.23
Loaded Width (Actual) 403
14 - 15 0 0.09 0.1 0.18
Floor Dead Load (KPa) 0.63
15 - 16 0 0.09 0.2 0.28
Floor Live Load (KPa) 1.92
16 - 17 0 0.05 0.2 0.23
Floor Point Load (KPa) 1.80 17 - 18 0 0 0.14 0.14
Ceiling Dead Load (KPa) 0.15 Webs
Ceiling Live Load (KPa) 0.00
Heel 283 mm BC 1,744 mm Heel 283 mm
10 - 1 0.05 0.02 0 0.05
Ceiling Point Load (KPa) 1.10 18 - 9 0.11 0 0.01 0.11
11 - 2 0.15 0 0.01 0.17
Truss Summary 3 - 12 0 0.09 0.01 0.1
13 - 4 0.09 0.01 0.01 0.1
Item Value 5 - 14 0.06 0.04 0.01 0.06
Steel 6050-G550-0.75 15 - 6 0.02 0.06 0.01 0.07
7 - 16 0.13 0 0.01 0.14
Width [m] 1.7 Reactions 17 - 8 0 0.11 0.01 0.12
Height [m] 0.3
Loaded Width 403 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,301 Max. Ult 1,301
Batten Spacing 600 Min. Ult 239 Min. Ult 239
BC Span [m] 1.7
Steel [m] 6.2
Weight [kg] 6.5
Max. Deflection Up 0.100
Max. Deflection Down -0.273
Max CR - Top Chord 0.49
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (249, -34) -0.1 -0.1 0.0 0.0
Dead Load -0.11 5.64 0.02
3 (330, -34) -0.1 -0.2 0.0 0.0
Live Load -0.27 6.77 0.04
4 (715, -34) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (796, -34) -0.1 -0.3 0.0 0.0
6 (1181, -34) -0.1 -0.3 0.0 0.0
7 (1263, -34) -0.1 -0.2 0.0 0.0
8 (1646, -34) 0.0 -0.1 0.0 0.0
9 (1718, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (99, -251) 0.0 -0.1 0.0 0.0
12 (482, -251) -0.1 -0.2 0.0 0.0
13 (563, -251) -0.1 -0.2 0.0 0.0
14 (948, -251) -0.1 -0.3 0.0 0.0
15 (1029, -251) -0.1 -0.3 0.0 0.0
16 (1414, -251) -0.1 -0.2 0.0 0.0
17 (1496, -251) -0.1 -0.1 0.0 0.0
18 (1718, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F118

Environment Truss F118 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.26 0.26
Wind Code AS/NZS 1170.2 2-3 0.09 0 0.26 0.32
Code AU 3-4 0.14 0 0.39 0.48
Building Function A 4-5 0.19 0 0.19 0.33
Importance Level 2 5-6 0.16 0 0.37 0.49
Annual prob. of exceed. - Wind 1:500
1,744 mm 6-7 0.15 0 0.24 0.35
7-8 0.08 0 0.43 0.47
Annual prob. of exceed. - Snow 1:150
8-9 0 0 0.26 0.26
Roof Type Hip 1 2 3 4 5 6 7 8 9 Bottom Chord
Building Length [m] 19.8
10 - 11 0 0 0.28 0.34
Building Width [m] 25.1
11 - 12 0 0.05 0.28 0.34
Avg. Roof Height [m] 6.3 12 - 13 0 0.08 0.13 0.21
Enclosed? Enclosed 13 - 14 0 0.11 0.18 0.23
14 - 15 0 0.09 0.1 0.18
For complete job environment details, refer to the job
15 - 16 0 0.09 0.2 0.28
Enviroments Report.
16 - 17 0 0.05 0.2 0.23
17 - 18 0 0 0.14 0.14
Load Summary Webs
10 - 1 0.05 0.02 0 0.05
Load Value 18 - 9 0.1 0 0.01 0.11
Loaded Width (Actual) 383 10 11 12 13 14 15 16 17 18
11 - 2 0.15 0 0.01 0.17
Floor Dead Load (KPa) 0.63 3 - 12 0 0.09 0.01 0.1
Floor Live Load (KPa) 1.92 13 - 4 0.09 0.01 0.01 0.1
Floor Point Load (KPa) 1.80 5 - 14 0.06 0.04 0.01 0.06
Ceiling Dead Load (KPa) 0.15 15 - 6 0.02 0.06 0.01 0.07
Ceiling Live Load (KPa) 0.00
Heel 283 mm BC 1,744 mm Heel 283 mm 7 - 16 0.13 0 0.01 0.14
Ceiling Point Load (KPa) 1.10 17 - 8 0 0.11 0.01 0.12

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.7 Reactions
Height [m] 0.3
Loaded Width 383 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,237 Max. Ult 1,237
Batten Spacing 600 Min. Ult 228 Min. Ult 228
BC Span [m] 1.7
Steel [m] 6.2
Weight [kg] 6.5
Max. Deflection Up 0.100
Max. Deflection Down -0.259
Max CR - Top Chord 0.49
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (249, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.11 5.64 0.02
3 (330, -34) -0.1 -0.2 0.0 0.0
Live Load -0.26 6.77 0.04
4 (715, -34) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (796, -34) -0.1 -0.3 0.0 0.0
6 (1181, -34) -0.1 -0.2 0.0 0.0
7 (1263, -34) -0.1 -0.2 0.0 0.0
8 (1646, -34) 0.0 -0.1 0.0 0.0
9 (1718, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (99, -251) 0.0 -0.1 0.0 0.0
12 (482, -251) -0.1 -0.2 0.0 0.0
13 (563, -251) -0.1 -0.2 0.0 0.0
14 (948, -251) -0.1 -0.3 0.0 0.0
15 (1029, -251) -0.1 -0.3 0.0 0.0
16 (1414, -251) -0.1 -0.2 0.0 0.0
17 (1496, -251) -0.1 -0.1 0.0 0.0
18 (1718, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F119

Environment Truss F119 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.25 0.25
Wind Code AS/NZS 1170.2 2-3 0.09 0 0.25 0.32
Code AU 3-4 0.13 0 0.39 0.48
Building Function A 4-5 0.18 0 0.19 0.32
Importance Level 2 5-6 0.16 0 0.37 0.49
Annual prob. of exceed. - Wind 1:500
1,744 mm 6-7 0.15 0 0.24 0.35
7-8 0.08 0 0.43 0.46
Annual prob. of exceed. - Snow 1:150
8-9 0 0 0.25 0.25
Roof Type Hip 1 2 3 4 5 6 7 8 9 Bottom Chord
Building Length [m] 19.8
10 - 11 0 0 0.28 0.34
Building Width [m] 25.1
11 - 12 0 0.05 0.28 0.33
Avg. Roof Height [m] 6.3 12 - 13 0 0.08 0.13 0.21
Enclosed? Enclosed 13 - 14 0 0.11 0.18 0.23
14 - 15 0 0.09 0.1 0.18
For complete job environment details, refer to the job
15 - 16 0 0.09 0.2 0.27
Enviroments Report.
16 - 17 0 0.04 0.2 0.23
17 - 18 0 0 0.13 0.13
Load Summary Webs
10 - 1 0.05 0.02 0 0.05
Load Value 18 - 9 0.1 0 0.01 0.11
Loaded Width (Actual) 333 10 11 12 13 14 15 16 17 18
11 - 2 0.15 0 0.01 0.16
Floor Dead Load (KPa) 0.63 3 - 12 0 0.09 0.01 0.1
Floor Live Load (KPa) 1.92 13 - 4 0.09 0.01 0.01 0.09
Floor Point Load (KPa) 1.80 5 - 14 0.06 0.04 0.01 0.06
Ceiling Dead Load (KPa) 0.15 15 - 6 0.02 0.06 0.01 0.07
Ceiling Live Load (KPa) 0.00
Heel 283 mm BC 1,744 mm Heel 283 mm 7 - 16 0.13 0 0.01 0.14
Ceiling Point Load (KPa) 1.10 17 - 8 0 0.11 0.01 0.12

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.7 Reactions
Height [m] 0.3
Loaded Width 333 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,075 Max. Ult 1,075
Batten Spacing 600 Min. Ult 198 Min. Ult 198
BC Span [m] 1.7
Steel [m] 6.2
Weight [kg] 6.5
Max. Deflection Up 0.100
Max. Deflection Down -0.226
Max CR - Top Chord 0.49
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (249, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.09 5.64 0.02
3 (330, -34) -0.1 -0.1 0.0 0.0
Live Load -0.23 6.77 0.03
4 (715, -34) -0.1 -0.2 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (796, -34) -0.1 -0.2 0.0 0.0
6 (1181, -34) -0.1 -0.2 0.0 0.0
7 (1263, -34) -0.1 -0.2 0.0 0.0
8 (1646, -34) 0.0 -0.1 0.0 0.0
9 (1718, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (99, -251) 0.0 -0.1 0.0 0.0
12 (482, -251) -0.1 -0.2 0.0 0.0
13 (563, -251) -0.1 -0.2 0.0 0.0
14 (948, -251) -0.1 -0.2 0.0 0.0
15 (1029, -251) -0.1 -0.2 0.0 0.0
16 (1414, -251) -0.1 -0.2 0.0 0.0
17 (1496, -251) 0.0 -0.1 0.0 0.0
18 (1718, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F120
Identical Trusses
Environment Truss F120
F120 F121 F122 F123
Site Data F124
Elevation ASL [m] 10
Building Data 5 Identical Trusses
Wind Code AS/NZS 1170.2
Code AU Forces
Building Function A
Importance Level 2 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Wind 1:500 Top Chord
Annual prob. of exceed. - Snow 1:150 1-2 0 0 0.34 0.34
Roof Type Hip 2-3 0.11 0 0.34 0.41
Building Length [m] 19.8 3-4 0.19 0 0.37 0.49
4,632 mm
Building Width [m] 25.1 4-5 0.28 0 0.26 0.5
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 5-6 0.33 0 0.41 0.67
6-7 0.4 0 0.21 0.56
Enclosed? Enclosed
7-8 0.41 0 0.43 0.78
For complete job environment details, refer to the job 8-9 0.46 0 0.16 0.59
Enviroments Report. 9 - 10 0.44 0 0.44 0.81
10 - 11 0.45 0 0.17 0.59
11 - 12 0.41 0 0.43 0.78
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
12 - 13 0.4 0 0.22 0.56
13 - 14 0.33 0 0.41 0.68
Load Value
14 - 15 0.3 0 0.28 0.52
Loaded Width (Actual) 403
15 - 16 0.21 0 0.4 0.55
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,632 mm Heel 283 mm 16 - 17 0.16 0 0.33 0.43
Floor Live Load (KPa) 1.92 17 - 18 0.05 0.04 0.34 0.38
Floor Point Load (KPa) 1.80 18 - 19 0.01 0.07 0.28 0.28
Ceiling Dead Load (KPa) 0.15 19 - 20 0 0.11 0.57 0.59
Ceiling Live Load (KPa) 0.00 20 - 21 0 0 0.57 0.57
Ceiling Point Load (KPa) 1.10 21 - 22 0 0 0.25 0.25
Bottom Chord
Truss Summary 23 - 24 0 0 0.11 0.11
24 - 25 0 0.06 0.17 0.22
Item Value 25 - 26 0 0.11 0.2 0.31
Steel 6050-G550-0.75 26 - 27 0 0.16 0.2 0.36
27 - 28 0 0.19 0.16 0.36
Width [m] 4.6 Reactions 28 - 29 0 0.23 0.2 0.4
Height [m] 0.3
29 - 30 0 0.24 0.14 0.38
Loaded Width 403 Reaction @ Node 24 Reaction @ Node 41 Reaction @ Node 43
30 - 31 0 0.26 0.21 0.4
Purlin Spacing 250 Max. Ult 2,917 Max. Ult 9,417 Max. Ult -973
31 - 32 0 0.25 0.12 0.36
Batten Spacing 600 Min. Ult 537 Min. Ult 1,732 Min. Ult -5,291
32 - 33 0 0.26 0.21 0.41
BC Span [m] 4.6
33 - 34 0 0.24 0.15 0.38
Steel [m] 16.0 34 - 35 0 0.23 0.2 0.4
Weight [kg] 16.8 35 - 36 0 0.19 0.17 0.36
Max. Deflection Up 0.222 36 - 37 0 0.17 0.19 0.35
Max. Deflection Down -3.902 37 - 38 0 0.12 0.23 0.34
Max CR - Top Chord 0.81 38 - 39 0 0.09 0.3 0.37
Max CR - Bottom Chord 0.57 39 - 40 0.07 0.03 0.36 0.39
Status Pass 40 - 41 0.13 0.01 0.42 0.51
Nodes / Deflections 41 - 42 0.19 0 0.43 0.57
42 - 43 0 0 0.32 0.32
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 43 - 44 0 0 0.25 0.25
1 (26, -34) 0.1 0.2 0.0 0.0 22 (4606, -34) 0.0 0.0 0.0 0.0 43 (4546, -251) 0.0 0.0 0.0 0.0 B+S+2T Webs
Maximum Limit Ratio
2 (249, -34) -0.2 -0.5 0.0 0.0 23 (26, -251) 0.1 0.2 0.0 0.0 44 (4606, -251) 0.0 0.0 0.0 0.0 23 - 1 0.04 0.03 0 0.04
Dead Load -1.58 12.00 0.13
3 (331, -34) -0.3 -0.7 0.0 0.0 24 (99, -251) 0.0 0.0 0.0 0.0 44 - 22 0.11 0 0.01 0.12
Live Load -3.90 16.63 0.23
4 (717, -34) -0.8 -1.9 0.0 0.0 25 (483, -251) -0.5 -1.2 0.0 0.0 24 - 2 0.18 0 0.02 0.2
Dead Load 0.00 0.00 0.00
5 (798, -34) -0.9 -2.1 0.0 0.0 26 (564, -251) -0.6 -1.5 0.0 0.0 3 - 25 0 0.13 0.02 0.14
6 (1185, -34) -1.2 -3.0 0.0 0.0 27 (951, -251) -1.0 -2.5 0.0 0.0 26 - 4 0.16 0 0.02 0.17
7 (1266, -34) -1.3 -3.2 0.0 0.0 28 (1032, -251) -1.1 -2.7 0.0 0.0 5 - 27 0 0.11 0.01 0.13
8 (1652, -34) -1.5 -3.7 0.0 0.0 29 (1418, -251) -1.4 -3.4 0.0 0.0 28 - 6 0.13 0.01 0.01 0.14
9 (1734, -34) -1.5 -3.8 0.0 0.0 30 (1500, -251) -1.4 -3.5 0.0 0.0 7 - 29 0.03 0.09 0.01 0.09
10 (2120, -34) -1.6 -3.9 0.0 0.0 31 (1886, -251) -1.6 -3.9 0.0 0.0 30 - 8 0.09 0.04 0.01 0.1
11 (2201, -34) -1.6 -3.9 0.0 0.0 32 (1967, -251) -1.6 -3.9 0.0 0.0 9 - 31 0.07 0.06 0.01 0.07
12 (2588, -34) -1.5 -3.6 0.0 0.0 33 (2354, -251) -1.6 -3.8 0.0 0.0 32 - 10 0.06 0.07 0.01 0.07
13 (2669, -34) -1.4 -3.5 0.0 0.0 34 (2435, -251) -1.5 -3.8 0.0 0.0 11 - 33 0.1 0.04 0.01 0.11
14 (3055, -34) -1.2 -2.9 0.0 0.0 35 (2821, -251) -1.4 -3.3 0.0 0.0 34 - 12 0.03 0.09 0.01 0.1
15 (3137, -34) -1.1 -2.7 0.0 0.0 36 (2903, -251) -1.3 -3.2 0.0 0.0 13 - 35 0.13 0.01 0.01 0.14
16 (3523, -34) -0.8 -1.9 0.0 0.0 37 (3289, -251) -1.0 -2.4 0.0 0.0 36 - 14 0 0.12 0.01 0.13
17 (3604, -34) -0.7 -1.6 0.0 0.0 38 (3370, -251) -0.9 -2.2 0.0 0.0 15 - 37 0.17 0 0.02 0.18
18 (3993, -34) -0.3 -0.6 0.0 0.0 39 (3757, -251) -0.5 -1.3 0.0 0.0 38 - 16 0 0.15 0.02 0.17
19 (4072, -34) -0.2 -0.4 0.0 0.0 40 (3838, -251) -0.4 -1.0 0.0 0.0 17 - 39 0.2 0 0.02 0.22
20 (4472, -34) 0.1 0.2 0.0 0.0 B+S+2T 41 (4256, -251) 0.0 0.0 0.0 0.0 40 - 18 0 0.13 0.02 0.14
21 (4546, -34) 0.0 0.0 0.0 0.0 B+S+2T 42 (4334, -251) 0.0 0.0 0.0 0.0 B+S+2T 19 - 41 0.14 0 0.01 0.15

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F120 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
42 - 20 0.35 0 0.03 0.38
43 - 21 0 0.29 0.04 0.32

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F125
Identical Trusses
Environment Truss F125
F125 F126 F127 F128
Site Data
Elevation ASL [m] 10 4 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.36 0.36
Annual prob. of exceed. - Snow 1:150 2-3 0.12 0 0.36 0.46
Roof Type Hip 3-4 0.22 0 0.4 0.54
Building Length [m] 19.8 4-5 0.33 0 0.29 0.57
4,632 mm
Building Width [m] 25.1 5-6 0.41 0 0.45 0.77
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 6-7 0.49 0 0.23 0.68
Avg. Roof Height [m] 6.3
7-8 0.54 0 0.47 0.93
Enclosed? Enclosed
8-9 0.58 0 0.21 0.74
For complete job environment details, refer to the job 9 - 10 0.6 0 0.49 1
Enviroments Report. 10 - 11 0.62 0 0.19 0.78
11 - 12 0.6 0 0.49 1
12 - 13 0.58 0 0.21 0.74
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
13 - 14 0.54 0 0.47 0.93
14 - 15 0.49 0 0.23 0.68
Load Value
15 - 16 0.41 0 0.45 0.77
Loaded Width (Actual) 406
16 - 17 0.33 0 0.29 0.57
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,632 mm Heel 283 mm 17 - 18 0.22 0 0.4 0.54
Floor Live Load (KPa) 1.92 18 - 19 0.12 0 0.36 0.46
Floor Point Load (KPa) 1.80 19 - 20 0 0 0.36 0.36
Ceiling Dead Load (KPa) 0.15 Bottom Chord
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.11 0.11
Ceiling Point Load (KPa) 1.10 22 - 23 0 0.07 0.18 0.24
23 - 24 0 0.13 0.23 0.36
24 - 25 0 0.19 0.23 0.42
Truss Summary
25 - 26 0 0.24 0.19 0.42
Item Value 26 - 27 0 0.28 0.22 0.47
Steel 6050-G550-0.75 27 - 28 0 0.31 0.17 0.48
28 - 29 0 0.34 0.23 0.51
Width [m] 4.6 Reactions 29 - 30 0 0.35 0.15 0.48
Height [m] 0.3
30 - 31 0 0.36 0.23 0.51
Loaded Width 406 Reaction @ Node 22 Reaction @ Node 39
31 - 32 0 0.35 0.15 0.48
Purlin Spacing 250 Max. Ult 3,548 Max. Ult 3,548
32 - 33 0 0.34 0.23 0.51
Batten Spacing 600 Min. Ult 653 Min. Ult 653
33 - 34 0 0.31 0.17 0.48
BC Span [m] 4.6 34 - 35 0 0.28 0.22 0.47
Steel [m] 15.6 35 - 36 0 0.24 0.19 0.42
Weight [kg] 16.3 36 - 37 0 0.19 0.23 0.42
Max. Deflection Up 0.342 37 - 38 0 0.13 0.23 0.36
Max. Deflection Down -6.758 38 - 39 0 0.07 0.18 0.24
Max CR - Top Chord 1.00 39 - 40 0 0 0.11 0.11
Max CR - Bottom Chord 0.51 Webs
Status Pass 21 - 1 0.04 0.03 0 0.04
Nodes / Deflections 40 - 20 0.04 0.03 0 0.04
22 - 2 0.2 0 0.02 0.22
BC Deflections Summary 3 - 23 0 0.14 0.02 0.16
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.1 0.3 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 24 - 4 0.18 0 0.02 0.2
Maximum Limit Ratio
2 (267, -34) -0.3 -0.8 0.0 0.0 23 (518, -251) -0.8 -2.0 0.0 0.0 5 - 25 0 0.13 0.02 0.15
Dead Load -2.75 12.00 0.23
3 (348, -34) -0.5 -1.2 0.0 0.0 24 (599, -251) -1.0 -2.4 0.0 0.0 26 - 6 0.15 0 0.01 0.16
Live Load -6.76 17.74 0.38
4 (769, -34) -1.3 -3.2 0.0 0.0 25 (1020, -251) -1.7 -4.2 0.0 0.0 7 - 27 0.02 0.1 0.01 0.11
Dead Load 0.00 0.00 0.00
5 (850, -34) -1.4 -3.5 0.0 0.0 26 (1101, -251) -1.8 -4.5 0.0 0.0 28 - 8 0.12 0.03 0.01 0.12
6 (1271, -34) -2.1 -5.1 0.0 0.0 27 (1522, -251) -2.4 -5.8 0.0 0.0 9 - 29 0.05 0.08 0.01 0.09
7 (1352, -34) -2.2 -5.4 0.0 0.0 28 (1603, -251) -2.4 -6.0 0.0 0.0 30 - 10 0.08 0.05 0.01 0.09
8 (1773, -34) -2.6 -6.3 0.0 0.0 29 (2024, -251) -2.7 -6.7 0.0 0.0 11 - 31 0.08 0.05 0.01 0.09
9 (1854, -34) -2.6 -6.5 0.0 0.0 30 (2105, -251) -2.7 -6.8 0.0 0.0 32 - 12 0.05 0.08 0.01 0.09
10 (2276, -34) -2.8 -6.8 0.0 0.0 31 (2527, -251) -2.7 -6.8 0.0 0.0 13 - 33 0.12 0.03 0.01 0.12
11 (2357, -34) -2.8 -6.8 0.0 0.0 32 (2608, -251) -2.7 -6.7 0.0 0.0 34 - 14 0.02 0.1 0.01 0.11
12 (2778, -34) -2.6 -6.5 0.0 0.0 33 (3029, -251) -2.4 -6.0 0.0 0.0 15 - 35 0.15 0 0.01 0.16
13 (2859, -34) -2.6 -6.3 0.0 0.0 34 (3110, -251) -2.4 -5.8 0.0 0.0 36 - 16 0 0.13 0.02 0.15
14 (3280, -34) -2.2 -5.4 0.0 0.0 35 (3531, -251) -1.8 -4.5 0.0 0.0 17 - 37 0.18 0 0.02 0.2
15 (3361, -34) -2.1 -5.1 0.0 0.0 36 (3612, -251) -1.7 -4.2 0.0 0.0 38 - 18 0 0.14 0.02 0.16
16 (3782, -34) -1.4 -3.5 0.0 0.0 37 (4033, -251) -1.0 -2.4 0.0 0.0 19 - 39 0.2 0 0.02 0.22
17 (3863, -34) -1.3 -3.2 0.0 0.0 38 (4114, -251) -0.8 -2.0 0.0 0.0
18 (4284, -34) -0.5 -1.2 0.0 0.0 39 (4534, -251) 0.0 0.0 0.0 0.0
19 (4366, -34) -0.3 -0.8 0.0 0.0 40 (4606, -251) 0.1 0.3 0.0 0.0
20 (4606, -34) 0.1 0.3 0.0 0.0
21 (26, -251) 0.1 0.3 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F129

Environment Truss F129 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.34 0.34
Wind Code AS/NZS 1170.2 2-3 0.11 0 0.34 0.42
Code AU 3-4 0.2 0 0.39 0.51
Building Function A 4-5 0.3 0 0.27 0.53
Importance Level 2 5-6 0.36 0 0.44 0.72
6-7 0.44 0 0.22 0.62
Annual prob. of exceed. - Wind 1:500
7-8 0.47 0 0.46 0.86
Annual prob. of exceed. - Snow 1:150
8-9 0.53 0 0.19 0.67
Roof Type Hip
9 - 10 0.52 0 0.47 0.93
Building Length [m] 19.8 4,632 mm 10 - 11 0.56 0 0.18 0.71
Building Width [m] 25.1
11 - 12 0.52 0 0.47 0.93
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.53 0 0.19 0.67
Enclosed? Enclosed 13 - 14 0.47 0 0.46 0.86
14 - 15 0.44 0 0.22 0.62
For complete job environment details, refer to the job
15 - 16 0.36 0 0.44 0.72
Enviroments Report.
16 - 17 0.3 0 0.27 0.53
17 - 18 0.2 0 0.39 0.51
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.11 0 0.34 0.42
19 - 20 0 0 0.34 0.34
Load Value Bottom Chord
Loaded Width (Actual) 245 21 - 22 0 0 0.11 0.11
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,632 mm Heel 283 mm 22 - 23 0 0.06 0.17 0.22
Floor Live Load (KPa) 1.92 23 - 24 0 0.11 0.2 0.32
Floor Point Load (KPa) 1.80 24 - 25 0 0.17 0.21 0.37
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.21 0.17 0.38
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.26 0.21 0.43
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.27 0.16 0.43
28 - 29 0 0.31 0.22 0.47
29 - 30 0 0.3 0.14 0.44
Truss Summary 30 - 31 0 0.32 0.22 0.46
31 - 32 0 0.3 0.14 0.44
Item Value
32 - 33 0 0.31 0.22 0.47
Steel 6050-G550-0.75
33 - 34 0 0.27 0.16 0.43
Width [m] 4.6 Reactions 34 - 35 0 0.26 0.21 0.43
Height [m] 0.3 35 - 36 0 0.21 0.17 0.38
Loaded Width 245 Reaction @ Node 22 Reaction @ Node 39 36 - 37 0 0.17 0.21 0.37
Purlin Spacing 250 Max. Ult 2,141 Max. Ult 2,141 37 - 38 0 0.11 0.2 0.32
Batten Spacing 600 Min. Ult 394 Min. Ult 394 38 - 39 0 0.06 0.17 0.22
BC Span [m] 4.6 39 - 40 0 0 0.11 0.11
Steel [m] 15.6 Webs
Weight [kg] 16.3 21 - 1 0.04 0.02 0 0.04
Max. Deflection Up 0.207 40 - 20 0.04 0.02 0 0.04
Max. Deflection Down -4.078 22 - 2 0.18 0 0.02 0.2
Max CR - Top Chord 0.93 3 - 23 0 0.13 0.02 0.14
Max CR - Bottom Chord 0.47 24 - 4 0.16 0 0.02 0.18
Status Pass 5 - 25 0 0.12 0.01 0.13
26 - 6 0.14 0.01 0.01 0.15
Nodes / Deflections 7 - 27 0.03 0.1 0.01 0.11
BC Deflections Summary 28 - 8 0.11 0.03 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.1 0.2 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 9 - 29 0.05 0.08 0.01 0.08
Maximum Limit Ratio 30 - 10 0.08 0.05 0.01 0.09
2 (267, -34) -0.2 -0.5 0.0 0.0 23 (518, -251) -0.5 -1.2 0.0 0.0
Dead Load -1.66 12.00 0.14 11 - 31 0.08 0.05 0.01 0.09
3 (348, -34) -0.3 -0.7 0.0 0.0 24 (599, -251) -0.6 -1.5 0.0 0.0
Live Load -4.08 17.74 0.23 32 - 12 0.05 0.08 0.01 0.08
4 (769, -34) -0.8 -1.9 0.0 0.0 25 (1020, -251) -1.0 -2.5 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0.11 0.03 0.01 0.12
5 (850, -34) -0.9 -2.1 0.0 0.0 26 (1101, -251) -1.1 -2.7 0.0 0.0
6 (1271, -34) -1.2 -3.1 0.0 0.0 27 (1522, -251) -1.4 -3.5 0.0 0.0 34 - 14 0.03 0.1 0.01 0.11
7 (1352, -34) -1.3 -3.2 0.0 0.0 28 (1603, -251) -1.5 -3.6 0.0 0.0 15 - 35 0.14 0.01 0.01 0.15
8 (1773, -34) -1.6 -3.8 0.0 0.0 29 (2024, -251) -1.6 -4.0 0.0 0.0 36 - 16 0 0.12 0.01 0.13
9 (1854, -34) -1.6 -3.9 0.0 0.0 30 (2105, -251) -1.7 -4.1 0.0 0.0 17 - 37 0.16 0 0.02 0.18
10 (2276, -34) -1.7 -4.1 0.0 0.0 31 (2527, -251) -1.7 -4.1 0.0 0.0 38 - 18 0 0.13 0.02 0.14
11 (2357, -34) -1.7 -4.1 0.0 0.0 32 (2608, -251) -1.6 -4.0 0.0 0.0 19 - 39 0.18 0 0.02 0.2
12 (2778, -34) -1.6 -3.9 0.0 0.0 33 (3029, -251) -1.5 -3.6 0.0 0.0
13 (2859, -34) -1.6 -3.8 0.0 0.0 34 (3110, -251) -1.4 -3.5 0.0 0.0
14 (3280, -34) -1.3 -3.2 0.0 0.0 35 (3531, -251) -1.1 -2.7 0.0 0.0
15 (3361, -34) -1.2 -3.1 0.0 0.0 36 (3612, -251) -1.0 -2.5 0.0 0.0
16 (3782, -34) -0.9 -2.1 0.0 0.0 37 (4033, -251) -0.6 -1.5 0.0 0.0
17 (3863, -34) -0.8 -1.9 0.0 0.0 38 (4114, -251) -0.5 -1.2 0.0 0.0
18 (4284, -34) -0.3 -0.7 0.0 0.0 39 (4534, -251) 0.0 0.0 0.0 0.0
19 (4366, -34) -0.2 -0.5 0.0 0.0 40 (4606, -251) 0.1 0.2 0.0 0.0
20 (4606, -34) 0.1 0.2 0.0 0.0
21 (26, -251) 0.1 0.2 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F130

Environment Truss F130 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.32 0.32
Wind Code AS/NZS 1170.2 2-3 0.1 0 0.32 0.4
Code AU 3-4 0.18 0 0.38 0.49
Building Function A 4-5 0.27 0 0.26 0.49
Importance Level 2 5-6 0.33 0 0.43 0.68
6-7 0.4 0 0.22 0.58
Annual prob. of exceed. - Wind 1:500
7-8 0.43 0 0.45 0.81
Annual prob. of exceed. - Snow 1:150
8-9 0.48 0 0.18 0.62
Roof Type Hip
9 - 10 0.48 0 0.46 0.87
Building Length [m] 19.8 4,632 mm 10 - 11 0.51 0 0.17 0.66
Building Width [m] 25.1
11 - 12 0.48 0 0.46 0.87
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.48 0 0.18 0.62
Enclosed? Enclosed 13 - 14 0.43 0 0.45 0.81
14 - 15 0.4 0 0.22 0.58
For complete job environment details, refer to the job
15 - 16 0.33 0 0.43 0.68
Enviroments Report.
16 - 17 0.27 0 0.26 0.49
17 - 18 0.18 0 0.38 0.49
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.1 0 0.32 0.4
19 - 20 0 0 0.32 0.32
Load Value Bottom Chord
Loaded Width (Actual) 121 21 - 22 0 0 0.12 0.12
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,632 mm Heel 283 mm 22 - 23 0 0.06 0.17 0.2
Floor Live Load (KPa) 1.92 23 - 24 0 0.1 0.18 0.29
Floor Point Load (KPa) 1.80 24 - 25 0 0.16 0.2 0.34
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.19 0.16 0.35
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.23 0.21 0.39
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.25 0.15 0.4
28 - 29 0 0.28 0.21 0.43
29 - 30 0 0.28 0.13 0.4
Truss Summary 30 - 31 0 0.3 0.21 0.43
31 - 32 0 0.28 0.13 0.4
Item Value
32 - 33 0 0.28 0.21 0.43
Steel 6050-G550-0.75
33 - 34 0 0.25 0.15 0.4
Width [m] 4.6 Reactions 34 - 35 0 0.23 0.21 0.39
Height [m] 0.3 35 - 36 0 0.19 0.16 0.35
Loaded Width 121 Reaction @ Node 22 Reaction @ Node 39 36 - 37 0 0.16 0.2 0.34
Purlin Spacing 250 Max. Ult 1,057 Max. Ult 1,057 37 - 38 0 0.1 0.18 0.29
Batten Spacing 600 Min. Ult 195 Min. Ult 195 38 - 39 0 0.06 0.17 0.2
BC Span [m] 4.6 39 - 40 0 0 0.12 0.12
Steel [m] 15.6 Webs
Weight [kg] 16.3 21 - 1 0.04 0.02 0 0.05
Max. Deflection Up 0.102 40 - 20 0.04 0.02 0 0.05
Max. Deflection Down -2.014 22 - 2 0.17 0 0.02 0.18
Max CR - Top Chord 0.87 3 - 23 0.01 0.12 0.01 0.13
Max CR - Bottom Chord 0.43 24 - 4 0.15 0 0.01 0.16
Status Pass 5 - 25 0.01 0.11 0.01 0.12
26 - 6 0.13 0.02 0.01 0.14
Nodes / Deflections 7 - 27 0.03 0.09 0.01 0.1
BC Deflections Summary 28 - 8 0.1 0.04 0.01 0.11
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.1 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 9 - 29 0.06 0.07 0.01 0.08
Maximum Limit Ratio 30 - 10 0.08 0.06 0.01 0.09
2 (267, -34) -0.1 -0.2 0.0 0.0 23 (518, -251) -0.2 -0.6 0.0 0.0
Dead Load -0.82 12.00 0.07 11 - 31 0.08 0.06 0.01 0.09
3 (348, -34) -0.1 -0.4 0.0 0.0 24 (599, -251) -0.3 -0.7 0.0 0.0
Live Load -2.01 17.74 0.11 32 - 12 0.06 0.07 0.01 0.08
4 (769, -34) -0.4 -0.9 0.0 0.0 25 (1020, -251) -0.5 -1.3 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0.1 0.04 0.01 0.11
5 (850, -34) -0.4 -1.1 0.0 0.0 26 (1101, -251) -0.5 -1.3 0.0 0.0
6 (1271, -34) -0.6 -1.5 0.0 0.0 27 (1522, -251) -0.7 -1.7 0.0 0.0 34 - 14 0.03 0.09 0.01 0.1
7 (1352, -34) -0.6 -1.6 0.0 0.0 28 (1603, -251) -0.7 -1.8 0.0 0.0 15 - 35 0.13 0.02 0.01 0.14
8 (1773, -34) -0.8 -1.9 0.0 0.0 29 (2024, -251) -0.8 -2.0 0.0 0.0 36 - 16 0.01 0.11 0.01 0.12
9 (1854, -34) -0.8 -1.9 0.0 0.0 30 (2105, -251) -0.8 -2.0 0.0 0.0 17 - 37 0.15 0 0.01 0.16
10 (2276, -34) -0.8 -2.0 0.0 0.0 31 (2527, -251) -0.8 -2.0 0.0 0.0 38 - 18 0.01 0.12 0.01 0.13
11 (2357, -34) -0.8 -2.0 0.0 0.0 32 (2608, -251) -0.8 -2.0 0.0 0.0 19 - 39 0.17 0 0.02 0.18
12 (2778, -34) -0.8 -1.9 0.0 0.0 33 (3029, -251) -0.7 -1.8 0.0 0.0
13 (2859, -34) -0.8 -1.9 0.0 0.0 34 (3110, -251) -0.7 -1.7 0.0 0.0
14 (3280, -34) -0.6 -1.6 0.0 0.0 35 (3531, -251) -0.5 -1.3 0.0 0.0
15 (3361, -34) -0.6 -1.5 0.0 0.0 36 (3612, -251) -0.5 -1.3 0.0 0.0
16 (3782, -34) -0.4 -1.1 0.0 0.0 37 (4033, -251) -0.3 -0.7 0.0 0.0
17 (3863, -34) -0.4 -0.9 0.0 0.0 38 (4114, -251) -0.2 -0.6 0.0 0.0
18 (4284, -34) -0.1 -0.4 0.0 0.0 39 (4534, -251) 0.0 0.0 0.0 0.0
19 (4366, -34) -0.1 -0.2 0.0 0.0 40 (4606, -251) 0.0 0.1 0.0 0.0
20 (4606, -34) 0.0 0.1 0.0 0.0
21 (26, -251) 0.0 0.1 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F131
Identical Trusses
Environment Truss F131
F131 F132 F133 F134
Site Data F135 F136 F137 F138
Elevation ASL [m] 10 F139 F140 F141 F142
Building Data F143 F144 F145 F146
Wind Code AS/NZS 1170.2 F147 F148 F149 F150
Code AU F151 F152 F153 F154
Building Function A F155 F156 F157 F158
Importance Level 2 1,582 mm F159 F160
Annual prob. of exceed. - Wind 1:500
Annual prob. of exceed. - Snow 1:150 30 Identical Trusses
Roof Type Hip 1 2 3 4 5 6 7 8
Building Length [m] 19.8 Forces
Building Width [m] 25.1
Avg. Roof Height [m] 6.3 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Enclosed? Enclosed Top Chord
1-2 0 0 0.28 0.28
For complete job environment details, refer to the job 2-3 0.08 0 0.28 0.33
Enviroments Report. 3-4 0.11 0 0.37 0.45
4-5 0.15 0 0.17 0.26
Load Summary 5-6 0.11 0 0.37 0.45
6-7 0.08 0 0.28 0.33
Load Value 7-8 0 0 0.28 0.28
Loaded Width (Actual) 403 Bottom Chord
9 10 11 12 13 14 15 16
Floor Dead Load (KPa) 0.63 9 - 10 0 0 0.12 0.12
Floor Live Load (KPa) 1.92 10 - 11 0 0.05 0.17 0.19
11 - 12 0 0.06 0.09 0.16
Floor Point Load (KPa) 1.80
12 - 13 0 0.09 0.19 0.23
Ceiling Dead Load (KPa) 0.15
13 - 14 0 0.06 0.09 0.16
Ceiling Live Load (KPa) 0.00 Heel 283 mm BC 1,582 mm Heel 283 mm 14 - 15 0 0.05 0.17 0.19
Ceiling Point Load (KPa) 1.10
15 - 16 0 0 0.12 0.12
Webs
Truss Summary 9-1 0.04 0.02 0 0.05
16 - 8 0.04 0.02 0 0.05
Item Value 10 - 2 0.13 0 0.01 0.14
Steel 6050-G550-0.75 3 - 11 0.02 0.06 0.01 0.07
Width [m] 1.6 Reactions 12 - 4 0.07 0.01 0.01 0.08
Height [m] 0.3 5 - 13 0.07 0.01 0.01 0.08
Loaded Width 403 Reaction @ Node 10 Reaction @ Node 15 14 - 6 0.02 0.06 0.01 0.07
Purlin Spacing 250 Max. Ult 1,176 Max. Ult 1,176 7 - 15 0.13 0 0.01 0.14
Batten Spacing 600 Min. Ult 216 Min. Ult 216
BC Span [m] 1.6
Steel [m] 5.6
Weight [kg] 5.9
Max. Deflection Up 0.013
Max. Deflection Down -0.106
Max CR - Top Chord 0.45
Max CR - Bottom Chord 0.23
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (260, -34) 0.0 0.0 0.0 0.0
Dead Load -0.04 4.62 0.01
3 (342, -34) 0.0 -0.1 0.0 0.0
Live Load -0.11 5.54 0.02
4 (750, -34) 0.0 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (832, -34) 0.0 -0.1 0.0 0.0
6 (1240, -34) 0.0 -0.1 0.0 0.0
7 (1322, -34) 0.0 0.0 0.0 0.0
8 (1556, -34) 0.0 0.0 0.0 0.0
9 (26, -251) 0.0 0.0 0.0 0.0
10 (99, -251) 0.0 0.0 0.0 0.0
11 (505, -251) 0.0 -0.1 0.0 0.0
12 (587, -251) 0.0 -0.1 0.0 0.0
13 (995, -251) 0.0 -0.1 0.0 0.0
14 (1077, -251) 0.0 -0.1 0.0 0.0
15 (1483, -251) 0.0 0.0 0.0 0.0
16 (1556, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F161

Environment Truss F161 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.28 0.28
Wind Code AS/NZS 1170.2 2-3 0.08 0 0.28 0.33
Code AU 3-4 0.11 0 0.37 0.45
Building Function A 4-5 0.15 0 0.17 0.26
5-6 0.11 0 0.37 0.45
Importance Level 2 1,582 mm
6-7 0.08 0 0.28 0.33
Annual prob. of exceed. - Wind 1:500
7-8 0 0 0.28 0.28
Annual prob. of exceed. - Snow 1:150
1 2 3 4 5 6 7 8 Bottom Chord
Roof Type Hip
9 - 10 0 0 0.12 0.12
Building Length [m] 19.8
10 - 11 0 0.05 0.17 0.19
Building Width [m] 25.1
11 - 12 0 0.06 0.09 0.16
Avg. Roof Height [m] 6.3 12 - 13 0 0.09 0.19 0.23
Enclosed? Enclosed 13 - 14 0 0.06 0.09 0.16
14 - 15 0 0.05 0.17 0.19
For complete job environment details, refer to the job
15 - 16 0 0 0.12 0.12
Enviroments Report.
Webs
9-1 0.04 0.02 0 0.05
Load Summary 16 - 8 0.04 0.02 0 0.05
10 - 2 0.13 0 0.01 0.14
Load Value 3 - 11 0.02 0.06 0.01 0.07
Loaded Width (Actual) 378 9 10 11 12 13 14 15 16 12 - 4 0.07 0.01 0.01 0.08
Floor Dead Load (KPa) 0.63 5 - 13 0.07 0.01 0.01 0.08
Floor Live Load (KPa) 1.92 14 - 6 0.02 0.06 0.01 0.07
Floor Point Load (KPa) 1.80 7 - 15 0.13 0 0.01 0.14
Ceiling Dead Load (KPa) 0.15
Ceiling Live Load (KPa) 0.00 Heel 283 mm BC 1,582 mm Heel 283 mm
Ceiling Point Load (KPa) 1.10

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.6 Reactions
Height [m] 0.3
Loaded Width 378 Reaction @ Node 10 Reaction @ Node 15
Purlin Spacing 250 Max. Ult 1,103 Max. Ult 1,103
Batten Spacing 600 Min. Ult 203 Min. Ult 203
BC Span [m] 1.6
Steel [m] 5.6
Weight [kg] 5.9
Max. Deflection Up 0.012
Max. Deflection Down -0.099
Max CR - Top Chord 0.45
Max CR - Bottom Chord 0.23
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (260, -34) 0.0 0.0 0.0 0.0
Dead Load -0.04 4.62 0.01
3 (342, -34) 0.0 -0.1 0.0 0.0
Live Load -0.10 5.54 0.02
4 (750, -34) 0.0 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (832, -34) 0.0 -0.1 0.0 0.0
6 (1240, -34) 0.0 -0.1 0.0 0.0
7 (1322, -34) 0.0 0.0 0.0 0.0
8 (1556, -34) 0.0 0.0 0.0 0.0
9 (26, -251) 0.0 0.0 0.0 0.0
10 (99, -251) 0.0 0.0 0.0 0.0
11 (505, -251) 0.0 -0.1 0.0 0.0
12 (587, -251) 0.0 -0.1 0.0 0.0
13 (995, -251) 0.0 -0.1 0.0 0.0
14 (1077, -251) 0.0 -0.1 0.0 0.0
15 (1483, -251) 0.0 0.0 0.0 0.0
16 (1556, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F162

Environment Truss F162 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.22 0.22
Wind Code AS/NZS 1170.2 2-3 0.03 0 0.12 0.13
Code AU 3-4 0.01 0.03 0.27 0.3
Building Function A 4-5 0.03 0.01 0.16 0.16
5-6 0.01 0.02 0.28 0.3
Importance Level 2 1,582 mm
6-7 0.03 0.01 0.16 0.16
Annual prob. of exceed. - Wind 1:500
7-8 0 0 0.22 0.22
Annual prob. of exceed. - Snow 1:150
1 2 3 4 5 6 7 8 Bottom Chord
Roof Type Hip
9 - 10 0 0 0.1 0.12
Building Length [m] 19.8
10 - 11 0.01 0.02 0.24 0.24
Building Width [m] 25.1
11 - 12 0.04 0 0.11 0.13
Avg. Roof Height [m] 6.3 12 - 13 0.01 0.02 0.17 0.17
Enclosed? Enclosed 13 - 14 0.04 0 0.1 0.13
14 - 15 0.01 0.02 0.17 0.18
For complete job environment details, refer to the job
15 - 16 0 0 0.08 0.09
Enviroments Report.
Webs
9-1 0.05 0.01 0 0.05
Load Summary 16 - 8 0.05 0.01 0 0.05
10 - 2 0.05 0.01 0 0.05
Load Value 3 - 11 0.07 0 0.01 0.08
Loaded Width (Actual) 375 9 10 11 12 13 14 15 16 12 - 4 0.08 0.01 0.01 0.09
Floor Dead Load (KPa) 0.63 5 - 13 0.07 0.01 0.01 0.07
Floor Live Load (KPa) 1.92 14 - 6 0.08 0.01 0.01 0.08
Floor Point Load (KPa) 1.80 7 - 15 0.04 0.02 0 0.05
Ceiling Dead Load (KPa) 0.15
Ceiling Live Load (KPa) 0.00 Heel 283 mm BC 1,582 mm Heel 283 mm
Ceiling Point Load (KPa) 1.10

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.6 Reactions
Height [m] 0.3
Loaded Width 375 Reaction @ Node 9 Reaction @ Node 12 Reaction @ Node 14 Reaction @ Node 16
Purlin Spacing 250 Max. Ult 302 Max. Ult 892 Max. Ult 726 Max. Ult 270
Batten Spacing 600 Min. Ult 54 Min. Ult 165 Min. Ult 136 Min. Ult 47
BC Span [m] 1.6
Steel [m] 5.6
Weight [kg] 5.9
Max. Deflection Up 0.100
Max. Deflection Down -0.010
Max CR - Top Chord 0.30
Max CR - Bottom Chord 0.24
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (260, -34) 0.0 0.0 0.0 0.0
Dead Load 0.00 1.87 0.00
3 (342, -34) 0.0 0.0 0.0 0.0
Live Load -0.01 2.24 0.00
4 (750, -34) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (832, -34) 0.0 0.0 0.0 0.0
6 (1240, -34) 0.0 0.0 0.0 0.0
7 (1322, -34) 0.0 0.0 0.0 0.0
8 (1556, -34) 0.0 0.0 0.0 0.0
9 (26, -251) 0.0 0.0 0.0 0.0
10 (99, -251) 0.0 0.0 0.0 0.0
11 (505, -251) 0.0 0.0 0.0 0.0
12 (587, -251) 0.0 0.0 0.0 0.0
13 (995, -251) 0.0 0.0 0.0 0.0
14 (1077, -251) 0.0 0.0 0.0 0.0
15 (1483, -251) 0.0 0.0 0.0 0.0
16 (1556, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F163

Environment Truss F163 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.31 0.31
Wind Code AS/NZS 1170.2 2-3 0.12 0 0.31 0.4
Code AU 3-4 0.22 0 0.41 0.56
Building Function A 4-5 0.32 0 0.28 0.55
Importance Level 2 5-6 0.37 0 0.42 0.72
6-7 0.45 0 0.21 0.62
Annual prob. of exceed. - Wind 1:500
7-8 0.47 0 0.45 0.85
Annual prob. of exceed. - Snow 1:150
8-9 0.53 0 0.19 0.67
Roof Type Hip
9 - 10 0.52 0 0.46 0.91
Building Length [m] 19.8 4,419 mm 10 - 11 0.55 0 0.18 0.7
Building Width [m] 25.1
11 - 12 0.51 0 0.46 0.91
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.52 0 0.19 0.66
Enclosed? Enclosed 13 - 14 0.46 0 0.44 0.84
14 - 15 0.43 0 0.22 0.61
For complete job environment details, refer to the job
15 - 16 0.35 0 0.42 0.7
Enviroments Report.
16 - 17 0.29 0 0.27 0.52
17 - 18 0.19 0 0.37 0.49
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.11 0 0.34 0.42
19 - 20 0 0 0.34 0.34
Load Value Bottom Chord
Loaded Width (Actual) 282 21 - 22 0 0 0.37 0.45
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,419 mm Heel 283 mm 22 - 23 0 0.07 0.37 0.44
Floor Live Load (KPa) 1.92 23 - 24 0 0.13 0.22 0.35
Floor Point Load (KPa) 1.80 24 - 25 0 0.18 0.19 0.36
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.22 0.18 0.39
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.26 0.21 0.43
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.27 0.16 0.43
28 - 29 0 0.3 0.21 0.47
29 - 30 0 0.3 0.14 0.43
Truss Summary 30 - 31 0 0.32 0.22 0.46
31 - 32 0 0.3 0.14 0.44
Item Value
32 - 33 0 0.3 0.21 0.46
Steel 6050-G550-0.75
33 - 34 0 0.27 0.16 0.43
Width [m] 4.4 Reactions 34 - 35 0 0.25 0.21 0.43
Height [m] 0.3 35 - 36 0 0.21 0.18 0.38
Loaded Width 282 Reaction @ Node 21 Reaction @ Node 39 36 - 37 0 0.17 0.21 0.37
Purlin Spacing 250 Max. Ult 2,310 Max. Ult 2,389 37 - 38 0 0.11 0.21 0.32
Batten Spacing 600 Min. Ult 425 Min. Ult 440 38 - 39 0 0.06 0.17 0.23
BC Span [m] 4.4 39 - 40 0 0 0.11 0.11
Steel [m] 15.1 Webs
Weight [kg] 15.7 21 - 1 0.04 0.02 0 0.05
Max. Deflection Up 0.220 40 - 20 0.04 0.02 0 0.04
Max. Deflection Down -4.225 22 - 2 0.2 0 0.02 0.22
Max CR - Top Chord 0.91 3 - 23 0 0.15 0.02 0.17
Max CR - Bottom Chord 0.47 24 - 4 0.17 0 0.02 0.18
Status Pass 5 - 25 0 0.12 0.01 0.13
26 - 6 0.13 0.01 0.01 0.14
Nodes / Deflections 7 - 27 0.03 0.1 0.01 0.11
BC Deflections Summary 28 - 8 0.11 0.03 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) -0.1 -0.3 0.0 0.0 9 - 29 0.05 0.07 0.01 0.08
Maximum Limit Ratio 30 - 10 0.08 0.06 0.01 0.08
2 (255, -34) -0.3 -0.8 0.0 0.0 23 (494, -251) -0.6 -1.5 0.0 0.0
Dead Load -1.72 12.00 0.14 11 - 31 0.08 0.05 0.01 0.09
3 (336, -34) -0.4 -1.1 0.0 0.0 24 (575, -251) -0.7 -1.8 0.0 0.0
Live Load -4.22 17.18 0.25 32 - 12 0.05 0.08 0.01 0.09
4 (733, -34) -0.9 -2.2 0.0 0.0 25 (972, -251) -1.1 -2.8 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0.11 0.03 0.01 0.12
5 (815, -34) -1.0 -2.4 0.0 0.0 26 (1054, -251) -1.2 -3.0 0.0 0.0
6 (1212, -34) -1.3 -3.3 0.0 0.0 27 (1451, -251) -1.5 -3.7 0.0 0.0 34 - 14 0.02 0.1 0.01 0.11
7 (1293, -34) -1.4 -3.5 0.0 0.0 28 (1532, -251) -1.6 -3.8 0.0 0.0 15 - 35 0.14 0.01 0.01 0.15
8 (1690, -34) -1.6 -4.0 0.0 0.0 29 (1930, -251) -1.7 -4.2 0.0 0.0 36 - 16 0 0.12 0.01 0.14
9 (1772, -34) -1.7 -4.1 0.0 0.0 30 (2011, -251) -1.7 -4.2 0.0 0.0 17 - 37 0.17 0 0.02 0.18
10 (2169, -34) -1.7 -4.3 0.0 0.0 31 (2408, -251) -1.7 -4.2 0.0 0.0 38 - 18 0 0.13 0.02 0.14
11 (2250, -34) -1.7 -4.2 0.0 0.0 32 (2489, -251) -1.7 -4.1 0.0 0.0 19 - 39 0.18 0 0.02 0.2
12 (2648, -34) -1.6 -4.0 0.0 0.0 33 (2887, -251) -1.5 -3.7 0.0 0.0
13 (2729, -34) -1.6 -3.9 0.0 0.0 34 (2968, -251) -1.4 -3.6 0.0 0.0
14 (3126, -34) -1.3 -3.3 0.0 0.0 35 (3365, -251) -1.1 -2.8 0.0 0.0
15 (3207, -34) -1.3 -3.1 0.0 0.0 36 (3446, -251) -1.0 -2.6 0.0 0.0
16 (3605, -34) -0.9 -2.2 0.0 0.0 37 (3844, -251) -0.6 -1.5 0.0 0.0
17 (3686, -34) -0.8 -1.9 0.0 0.0 38 (3925, -251) -0.5 -1.2 0.0 0.0
18 (4083, -34) -0.3 -0.8 0.0 0.0 39 (4320, -251) 0.0 0.0 0.0 0.0
19 (4165, -34) -0.2 -0.5 0.0 0.0 40 (4393, -251) 0.1 0.2 0.0 0.0
20 (4393, -34) 0.1 0.2 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F164
Identical Trusses
Environment Truss F164
F164 F165 F166 F167
Site Data F168 F169 F170 F171
Elevation ASL [m] 10 F172 F173 F174 F175
Building Data
Wind Code AS/NZS 1170.2 12 Identical Trusses
Code AU
Building Function A Forces
Importance Level 2
Annual prob. of exceed. - Wind 1:500 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Snow 1:150 Top Chord
Roof Type Hip 1-2 0 0 0.33 0.33
Building Length [m] 19.8 4,419 mm 2-3 0.13 0 0.33 0.42
Building Width [m] 25.1 3-4 0.24 0 0.42 0.58
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4-5 0.34 0 0.29 0.59
Enclosed? Enclosed 5-6 0.4 0 0.43 0.76
6-7 0.48 0 0.23 0.65
For complete job environment details, refer to the job 7-8 0.51 0 0.46 0.9
Enviroments Report. 8-9 0.57 0 0.2 0.72
9 - 10 0.57 0 0.47 0.97
10 - 11 0.59 0 0.18 0.75
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
11 - 12 0.56 0 0.47 0.96
12 - 13 0.56 0 0.21 0.71
Load Value
13 - 14 0.5 0 0.45 0.88
Loaded Width (Actual) 406
14 - 15 0.46 0 0.23 0.65
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,419 mm Heel 283 mm 15 - 16 0.38 0 0.43 0.74
Floor Live Load (KPa) 1.92
16 - 17 0.31 0 0.28 0.55
Floor Point Load (KPa) 1.80 17 - 18 0.21 0 0.38 0.51
Ceiling Dead Load (KPa) 0.15 18 - 19 0.12 0 0.35 0.44
Ceiling Live Load (KPa) 0.00 19 - 20 0 0 0.35 0.35
Ceiling Point Load (KPa) 1.10 Bottom Chord
21 - 22 0 0 0.4 0.48
Truss Summary 22 - 23 0 0.07 0.4 0.47
23 - 24 0 0.14 0.24 0.38
Item Value 24 - 25 0 0.2 0.2 0.38
Steel 6050-G550-0.75 25 - 26 0 0.23 0.19 0.42
26 - 27 0 0.28 0.21 0.47
Width [m] 4.4 Reactions 27 - 28 0 0.3 0.17 0.47
Height [m] 0.3
28 - 29 0 0.33 0.22 0.5
Loaded Width 406 Reaction @ Node 21 Reaction @ Node 39
29 - 30 0 0.33 0.14 0.46
Purlin Spacing 250 Max. Ult 3,326 Max. Ult 3,440
30 - 31 0 0.34 0.22 0.49
Batten Spacing 600 Min. Ult 612 Min. Ult 633
31 - 32 0 0.33 0.15 0.47
BC Span [m] 4.4
32 - 33 0 0.32 0.22 0.5
Steel [m] 15.1
33 - 34 0 0.29 0.17 0.46
Weight [kg] 15.7 34 - 35 0 0.27 0.21 0.46
Max. Deflection Up 0.317 35 - 36 0 0.22 0.19 0.41
Max. Deflection Down -6.082 36 - 37 0 0.18 0.23 0.4
Max CR - Top Chord 0.97 37 - 38 0 0.12 0.23 0.35
Max CR - Bottom Chord 0.50 38 - 39 0 0.07 0.18 0.24
Status Pass 39 - 40 0 0 0.11 0.11
Nodes / Deflections Webs
21 - 1 0.04 0.02 0 0.05
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 40 - 20 0.04 0.03 0 0.04
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) -0.2 -0.4 0.0 0.0 22 - 2 0.22 0 0.02 0.24
2 (255, -34) -0.5 -1.1 0.0 0.0 23 (494, -251) -0.9 -2.2 0.0 0.0 3 - 23 0 0.17 0.02 0.18
Dead Load -2.47 12.00 0.21
3 (336, -34) -0.6 -1.5 0.0 0.0 24 (575, -251) -1.0 -2.6 0.0 0.0 24 - 4 0.18 0 0.02 0.19
Live Load -6.08 17.18 0.35
4 (733, -34) -1.3 -3.2 0.0 0.0 25 (972, -251) -1.6 -4.0 0.0 0.0 5 - 25 0 0.12 0.02 0.14
Dead Load 0.00 0.00 0.00
5 (815, -34) -1.4 -3.5 0.0 0.0 26 (1054, -251) -1.7 -4.3 0.0 0.0 26 - 6 0.14 0.01 0.01 0.15
6 (1212, -34) -1.9 -4.7 0.0 0.0 27 (1451, -251) -2.2 -5.3 0.0 0.0 7 - 27 0.02 0.1 0.01 0.11
7 (1293, -34) -2.0 -5.0 0.0 0.0 28 (1532, -251) -2.2 -5.5 0.0 0.0 28 - 8 0.11 0.03 0.01 0.12
8 (1690, -34) -2.3 -5.8 0.0 0.0 29 (1930, -251) -2.5 -6.0 0.0 0.0 9 - 29 0.05 0.08 0.01 0.08
9 (1772, -34) -2.4 -5.9 0.0 0.0 30 (2011, -251) -2.5 -6.1 0.0 0.0 30 - 10 0.08 0.05 0.01 0.09
10 (2169, -34) -2.5 -6.1 0.0 0.0 31 (2408, -251) -2.4 -6.0 0.0 0.0 11 - 31 0.08 0.05 0.01 0.09
11 (2250, -34) -2.5 -6.1 0.0 0.0 32 (2489, -251) -2.4 -5.9 0.0 0.0 32 - 12 0.05 0.08 0.01 0.09
12 (2648, -34) -2.3 -5.8 0.0 0.0 33 (2887, -251) -2.2 -5.3 0.0 0.0 13 - 33 0.12 0.03 0.01 0.13
13 (2729, -34) -2.3 -5.6 0.0 0.0 34 (2968, -251) -2.1 -5.1 0.0 0.0 34 - 14 0.02 0.1 0.01 0.12
14 (3126, -34) -1.9 -4.7 0.0 0.0 35 (3365, -251) -1.6 -4.0 0.0 0.0 15 - 35 0.15 0 0.01 0.16
15 (3207, -34) -1.8 -4.5 0.0 0.0 36 (3446, -251) -1.5 -3.7 0.0 0.0 36 - 16 0 0.13 0.02 0.15
16 (3605, -34) -1.3 -3.1 0.0 0.0 37 (3844, -251) -0.9 -2.1 0.0 0.0 17 - 37 0.18 0 0.02 0.19
17 (3686, -34) -1.1 -2.8 0.0 0.0 38 (3925, -251) -0.7 -1.7 0.0 0.0 38 - 18 0 0.14 0.02 0.16
18 (4083, -34) -0.4 -1.1 0.0 0.0 39 (4320, -251) 0.0 0.0 0.0 0.0 19 - 39 0.2 0 0.02 0.21
19 (4164, -34) -0.3 -0.7 0.0 0.0 40 (4393, -251) 0.1 0.3 0.0 0.0
20 (4393, -34) 0.1 0.3 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F176
Identical Trusses
Environment Truss F176
F176 F177 F178 F179
Site Data
Elevation ASL [m] 10 4 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.33 0.33
Annual prob. of exceed. - Snow 1:150 2-3 0.13 0 0.33 0.42
Roof Type Hip 3-4 0.24 0 0.42 0.58
Building Length [m] 19.8 4,419 mm 4-5 0.34 0 0.29 0.59
Building Width [m] 25.1 5-6 0.4 0 0.43 0.76
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 6-7 0.48 0 0.23 0.65
Avg. Roof Height [m] 6.3
7-8 0.51 0 0.46 0.9
Enclosed? Enclosed
8-9 0.57 0 0.2 0.72
For complete job environment details, refer to the job 9 - 10 0.57 0 0.47 0.97
Enviroments Report. 10 - 11 0.59 0 0.18 0.75
11 - 12 0.56 0 0.47 0.96
12 - 13 0.56 0 0.21 0.71
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
13 - 14 0.5 0 0.45 0.88
14 - 15 0.46 0 0.23 0.65
Load Value
15 - 16 0.38 0 0.43 0.74
Loaded Width (Actual) 406
16 - 17 0.31 0 0.28 0.55
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,419 mm Heel 283 mm 17 - 18 0.21 0 0.38 0.51
Floor Live Load (KPa) 1.92 18 - 19 0.12 0 0.35 0.44
Floor Point Load (KPa) 1.80 19 - 20 0 0 0.35 0.35
Ceiling Dead Load (KPa) 0.15 Bottom Chord
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.4 0.48
Ceiling Point Load (KPa) 1.10 22 - 23 0 0.07 0.4 0.47
23 - 24 0 0.14 0.24 0.38
24 - 25 0 0.2 0.2 0.38
Truss Summary
25 - 26 0 0.23 0.19 0.42
Item Value 26 - 27 0 0.28 0.21 0.47
Steel 6050-G550-0.75 27 - 28 0 0.3 0.17 0.47
28 - 29 0 0.33 0.22 0.5
Width [m] 4.4 Reactions 29 - 30 0 0.33 0.14 0.46
Height [m] 0.3
30 - 31 0 0.34 0.22 0.49
Loaded Width 406 Reaction @ Node 21 Reaction @ Node 39
31 - 32 0 0.33 0.15 0.47
Purlin Spacing 250 Max. Ult 3,325 Max. Ult 3,440
32 - 33 0 0.32 0.22 0.5
Batten Spacing 600 Min. Ult 612 Min. Ult 633
33 - 34 0 0.29 0.17 0.46
BC Span [m] 4.4 34 - 35 0 0.27 0.21 0.46
Steel [m] 15.1 35 - 36 0 0.22 0.19 0.41
Weight [kg] 15.7 36 - 37 0 0.18 0.23 0.4
Max. Deflection Up 0.316 37 - 38 0 0.12 0.23 0.35
Max. Deflection Down -6.080 38 - 39 0 0.07 0.18 0.24
Max CR - Top Chord 0.97 39 - 40 0 0 0.11 0.11
Max CR - Bottom Chord 0.50 Webs
Status Pass 21 - 1 0.04 0.02 0 0.05
Nodes / Deflections 40 - 20 0.04 0.03 0 0.04
22 - 2 0.22 0 0.02 0.24
BC Deflections Summary 3 - 23 0 0.17 0.02 0.18
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) -0.2 -0.4 0.0 0.0 24 - 4 0.18 0 0.02 0.19
Maximum Limit Ratio
2 (255, -34) -0.5 -1.1 0.0 0.0 23 (494, -251) -0.9 -2.2 0.0 0.0 5 - 25 0 0.12 0.02 0.14
Dead Load -2.47 12.00 0.21
3 (336, -34) -0.6 -1.5 0.0 0.0 24 (575, -251) -1.0 -2.6 0.0 0.0 26 - 6 0.14 0.01 0.01 0.15
Live Load -6.08 17.18 0.35
4 (733, -34) -1.3 -3.2 0.0 0.0 25 (972, -251) -1.6 -4.0 0.0 0.0 7 - 27 0.02 0.1 0.01 0.11
Dead Load 0.00 0.00 0.00
5 (814, -34) -1.4 -3.5 0.0 0.0 26 (1054, -251) -1.7 -4.3 0.0 0.0 28 - 8 0.11 0.03 0.01 0.12
6 (1212, -34) -1.9 -4.7 0.0 0.0 27 (1451, -251) -2.2 -5.3 0.0 0.0 9 - 29 0.05 0.08 0.01 0.08
7 (1293, -34) -2.0 -5.0 0.0 0.0 28 (1532, -251) -2.2 -5.5 0.0 0.0 30 - 10 0.08 0.05 0.01 0.09
8 (1690, -34) -2.3 -5.8 0.0 0.0 29 (1929, -251) -2.4 -6.0 0.0 0.0 11 - 31 0.08 0.05 0.01 0.09
9 (1772, -34) -2.4 -5.9 0.0 0.0 30 (2011, -251) -2.5 -6.1 0.0 0.0 32 - 12 0.05 0.08 0.01 0.09
10 (2169, -34) -2.5 -6.1 0.0 0.0 31 (2408, -251) -2.4 -6.0 0.0 0.0 13 - 33 0.12 0.03 0.01 0.13
11 (2250, -34) -2.5 -6.1 0.0 0.0 32 (2489, -251) -2.4 -5.9 0.0 0.0 34 - 14 0.02 0.1 0.01 0.12
12 (2647, -34) -2.3 -5.8 0.0 0.0 33 (2886, -251) -2.2 -5.3 0.0 0.0 15 - 35 0.15 0 0.01 0.16
13 (2729, -34) -2.3 -5.6 0.0 0.0 34 (2968, -251) -2.1 -5.1 0.0 0.0 36 - 16 0 0.13 0.02 0.15
14 (3126, -34) -1.9 -4.7 0.0 0.0 35 (3365, -251) -1.6 -4.0 0.0 0.0 17 - 37 0.18 0 0.02 0.19
15 (3207, -34) -1.8 -4.5 0.0 0.0 36 (3446, -251) -1.5 -3.7 0.0 0.0 38 - 18 0 0.14 0.02 0.16
16 (3604, -34) -1.3 -3.1 0.0 0.0 37 (3843, -251) -0.9 -2.1 0.0 0.0 19 - 39 0.2 0 0.02 0.21
17 (3686, -34) -1.1 -2.8 0.0 0.0 38 (3925, -251) -0.7 -1.7 0.0 0.0
18 (4083, -34) -0.4 -1.1 0.0 0.0 39 (4320, -251) 0.0 0.0 0.0 0.0
19 (4164, -34) -0.3 -0.7 0.0 0.0 40 (4393, -251) 0.1 0.3 0.0 0.0
20 (4393, -34) 0.1 0.3 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F180
Identical Trusses
Environment Truss F180
F180 F181
Site Data
Elevation ASL [m] 10 2 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.24 0.24
Annual prob. of exceed. - Snow 1:150 2-3 0.08 0 0.24 0.29
Roof Type Hip 3-4 0.13 0 0.36 0.45
Building Length [m] 19.8 4,419 mm 4-5 0.18 0 0.19 0.33
Building Width [m] 25.1 5-6 0.18 0.01 0.34 0.47
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 6-7 0.2 0.01 0.17 0.32
Avg. Roof Height [m] 6.3
7-8 0.15 0.02 0.34 0.45
Enclosed? Enclosed
8-9 0.14 0.03 0.24 0.34
For complete job environment details, refer to the job 9 - 10 0.08 0.04 0.33 0.39
Enviroments Report. 10 - 11 0.04 0.05 0.25 0.27
11 - 12 0 0.06 0.28 0.29
12 - 13 0.03 0.05 0.28 0.29
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
13 - 14 0.06 0.04 0.33 0.38
14 - 15 0.14 0.03 0.25 0.35
Load Value
15 - 16 0.16 0.02 0.37 0.48
Loaded Width (Actual) 406
16 - 17 0.2 0.01 0.19 0.34
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,419 mm Heel 283 mm 17 - 18 0.18 0.01 0.37 0.5
Floor Live Load (KPa) 1.92 18 - 19 0.18 0 0.2 0.34
Floor Point Load (KPa) 1.80 19 - 20 0.13 0 0.35 0.43
Ceiling Dead Load (KPa) 0.15 20 - 21 0.08 0 0.28 0.34
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.28 0.28
Ceiling Point Load (KPa) 1.10 Bottom Chord
23 - 24 0 0 0.3 0.36
24 - 25 0 0.04 0.3 0.35
Truss Summary
25 - 26 0 0.08 0.16 0.23
Item Value 26 - 27 0 0.1 0.17 0.23
Steel 6050-G550-0.75 27 - 28 0.01 0.1 0.09 0.18
28 - 29 0.02 0.11 0.17 0.23
Width [m] 4.4 Reactions 29 - 30 0.03 0.09 0.13 0.21
Height [m] 0.3
30 - 31 0.05 0.08 0.17 0.25
Loaded Width 406 Reaction @ Node 23 Reaction @ Node 34 Reaction @ Node 43
31 - 32 0.06 0.04 0.18 0.22
Purlin Spacing 250 Max. Ult 1,267 Max. Ult 4,069 Max. Ult 1,429
32 - 33 0.08 0.02 0.19 0.19
Batten Spacing 600 Min. Ult 233 Min. Ult 749 Min. Ult 263
33 - 34 0.11 0 0.21 0.25
BC Span [m] 4.4 34 - 35 0.08 0.02 0.21 0.25
Steel [m] 15.5 35 - 36 0.07 0.04 0.19 0.22
Weight [kg] 16.1 36 - 37 0.05 0.08 0.19 0.27
Max. Deflection Up 0.032 37 - 38 0.03 0.09 0.14 0.21
Max. Deflection Down -0.328 38 - 39 0.02 0.12 0.18 0.24
Max CR - Top Chord 0.50 39 - 40 0.01 0.1 0.09 0.18
Max CR - Bottom Chord 0.36 40 - 41 0 0.11 0.18 0.25
Status Pass 41 - 42 0 0.07 0.14 0.21
Nodes / Deflections 42 - 43 0 0.05 0.15 0.17
43 - 44 0 0 0.12 0.12
BC Deflections Summary Webs
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4393, -34) 0.0 0.0 0.0 0.0 43 (4320, -251) 0.0 0.0 0.0 0.0 23 - 1 0.05 0.02 0 0.05
Maximum Limit Ratio
2 (218, -34) -0.1 -0.1 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4393, -251) 0.0 0.0 0.0 0.0 44 - 22 0.04 0.02 0 0.05
Dead Load -0.13 7.07 0.02
3 (299, -34) -0.1 -0.2 0.0 0.0 24 (99, -251) 0.0 -0.1 0.0 0.0 24 - 2 0.16 0 0.02 0.17
Live Load -0.33 8.49 0.04
4 (622, -34) -0.1 -0.3 0.0 0.0 25 (420, -251) -0.1 -0.2 0.0 0.0 3 - 25 0 0.11 0.01 0.12
Dead Load 0.00 0.00 0.00
5 (703, -34) -0.1 -0.3 0.0 0.0 26 (501, -251) -0.1 -0.3 0.0 0.0 26 - 4 0.1 0.01 0.01 0.11
6 (1026, -34) -0.1 -0.3 0.0 0.0 27 (824, -251) -0.1 -0.3 0.0 0.0 5 - 27 0.04 0.06 0.01 0.06
7 (1108, -34) -0.1 -0.3 0.0 0.0 28 (905, -251) -0.1 -0.3 0.0 0.0 28 - 6 0.05 0.05 0.01 0.06
8 (1431, -34) -0.1 -0.3 0.0 0.0 29 (1229, -251) -0.1 -0.3 0.0 0.0 7 - 29 0.09 0.02 0.01 0.1
9 (1512, -34) -0.1 -0.2 0.0 0.0 30 (1310, -251) -0.1 -0.3 0.0 0.0 30 - 8 0.01 0.09 0.01 0.09
10 (1837, -34) -0.1 -0.1 0.0 0.0 31 (1633, -251) -0.1 -0.2 0.0 0.0 9 - 31 0.14 0 0.01 0.15
11 (1917, -34) 0.0 -0.1 0.0 0.0 32 (1714, -251) -0.1 -0.2 0.0 0.0 32 - 10 0 0.12 0.01 0.13
12 (2320, -34) 0.0 0.0 0.0 0.0 33 (2068, -251) 0.0 0.0 0.0 0.0 11 - 33 0.15 0 0.01 0.17
13 (2399, -34) 0.0 -0.1 0.0 0.0 34 (2148, -251) 0.0 0.0 0.0 0.0 34 - 12 0.15 0 0.01 0.16
14 (2765, -34) -0.1 -0.2 0.0 0.0 35 (2542, -251) 0.0 -0.1 0.0 0.0 13 - 35 0 0.11 0.01 0.12
15 (2846, -34) -0.1 -0.3 0.0 0.0 36 (2623, -251) -0.1 -0.2 0.0 0.0 36 - 14 0.14 0 0.01 0.15
16 (3210, -34) -0.1 -0.3 0.0 0.0 37 (2987, -251) -0.1 -0.3 0.0 0.0 15 - 37 0 0.09 0.01 0.1
17 (3291, -34) -0.1 -0.3 0.0 0.0 38 (3068, -251) -0.1 -0.3 0.0 0.0 38 - 16 0.09 0.02 0.01 0.1
18 (3655, -34) -0.1 -0.3 0.0 0.0 39 (3432, -251) -0.1 -0.3 0.0 0.0 17 - 39 0.05 0.04 0.01 0.06
19 (3736, -34) -0.1 -0.3 0.0 0.0 40 (3513, -251) -0.1 -0.3 0.0 0.0 40 - 18 0.03 0.06 0.01 0.06
20 (4099, -34) 0.0 -0.1 0.0 0.0 41 (3877, -251) -0.1 -0.2 0.0 0.0 19 - 41 0.1 0 0.01 0.11
21 (4181, -34) 0.0 -0.1 0.0 0.0 42 (3958, -251) -0.1 -0.2 0.0 0.0 42 - 20 0.01 0.09 0.01 0.09

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F180 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
21 - 43 0.15 0 0.01 0.16

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F182

Environment Truss F182 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.24 0.24
Wind Code AS/NZS 1170.2 2-3 0.08 0 0.24 0.3
Code AU 3-4 0.14 0 0.37 0.46
Building Function A 4-5 0.19 0 0.2 0.35
Importance Level 2 5-6 0.19 0 0.35 0.48
6-7 0.2 0.01 0.17 0.33
Annual prob. of exceed. - Wind 1:500
7-8 0.16 0.01 0.34 0.46
Annual prob. of exceed. - Snow 1:150
8-9 0.15 0.02 0.25 0.35
Roof Type Hip
9 - 10 0.08 0.04 0.34 0.39
Building Length [m] 19.8 4,418 mm 10 - 11 0.03 0.05 0.27 0.29
Building Width [m] 25.1
11 - 12 0 0.1 0.3 0.3
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
12 - 13 0.02 0.05 0.3 0.3
Enclosed? Enclosed 13 - 14 0.06 0.04 0.34 0.38
14 - 15 0.14 0.03 0.27 0.36
For complete job environment details, refer to the job
15 - 16 0.16 0.01 0.37 0.49
Enviroments Report.
16 - 17 0.21 0 0.19 0.36
17 - 18 0.19 0 0.38 0.52
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 18 - 19 0.19 0 0.21 0.36
19 - 20 0.13 0 0.35 0.44
Load Value 20 - 21 0.08 0 0.29 0.35
Loaded Width (Actual) 611 21 - 22 0 0 0.29 0.29
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,418 mm Heel 283 mm Bottom Chord
Floor Live Load (KPa) 1.92 23 - 24 0 0 0.32 0.38
Floor Point Load (KPa) 1.80 24 - 25 0 0.05 0.32 0.36
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.08 0.17 0.24
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.11 0.17 0.24
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.11 0.09 0.18
28 - 29 0.01 0.12 0.17 0.24
29 - 30 0.02 0.09 0.14 0.22
Truss Summary 30 - 31 0.04 0.08 0.18 0.26
31 - 32 0.07 0.04 0.19 0.23
Item Value
32 - 33 0.09 0.02 0.19 0.22
Steel 6050-G550-0.75
33 - 34 0.16 0 0.22 0.33
Width [m] 4.4 Reactions 34 - 35 0.09 0.01 0.22 0.27
Height [m] 0.3 35 - 36 0.07 0.04 0.23 0.25
Loaded Width 611 Reaction @ Node 23 Reaction @ Node 34 Reaction @ Node 43 36 - 37 0.04 0.08 0.2 0.29
Purlin Spacing 250 Max. Ult 1,907 Max. Ult 6,123 Max. Ult 2,151 37 - 38 0.02 0.09 0.15 0.23
Batten Spacing 600 Min. Ult 351 Min. Ult 1,127 Min. Ult 396 38 - 39 0.01 0.12 0.18 0.25
BC Span [m] 4.4 39 - 40 0 0.11 0.1 0.19
Steel [m] 15.5 40 - 41 0 0.11 0.19 0.26
Weight [kg] 16.1 41 - 42 0 0.08 0.15 0.22
Max. Deflection Up 0.048 42 - 43 0 0.05 0.15 0.17
Max. Deflection Down -0.493 43 - 44 0 0 0.12 0.12
Max CR - Top Chord 0.52 Webs
Max CR - Bottom Chord 0.38 23 - 1 0.05 0.02 0 0.05
Status Pass 44 - 22 0.04 0.02 0 0.05
24 - 2 0.17 0 0.02 0.18
Nodes / Deflections 3 - 25 0 0.11 0.01 0.12
BC Deflections Summary 26 - 4 0.11 0 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4392, -34) 0.0 0.0 0.0 0.0 43 (4320, -251) 0.0 0.0 0.0 0.0 5 - 27 0.04 0.06 0.01 0.06
Maximum Limit Ratio 28 - 6 0.05 0.05 0.01 0.05
2 (218, -34) -0.1 -0.2 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4392, -251) 0.0 0.0 0.0 0.0
Dead Load -0.20 7.07 0.03 7 - 29 0.09 0.02 0.01 0.1
3 (299, -34) -0.1 -0.3 0.0 0.0 24 (99, -251) 0.0 -0.1 0.0 0.0
Live Load -0.49 8.49 0.06 30 - 8 0 0.09 0.01 0.1
4 (622, -34) -0.2 -0.4 0.0 0.0 25 (420, -251) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00 9 - 31 0.15 0 0.01 0.16
5 (703, -34) -0.2 -0.5 0.0 0.0 26 (501, -251) -0.2 -0.4 0.0 0.0
6 (1026, -34) -0.2 -0.5 0.0 0.0 27 (824, -251) -0.2 -0.5 0.0 0.0 32 - 10 0 0.13 0.02 0.14
7 (1108, -34) -0.2 -0.5 0.0 0.0 28 (905, -251) -0.2 -0.5 0.0 0.0 11 - 33 0.17 0 0.02 0.18
8 (1431, -34) -0.2 -0.4 0.0 0.0 29 (1229, -251) -0.2 -0.5 0.0 0.0 34 - 12 0.16 0 0.02 0.17
9 (1512, -34) -0.1 -0.4 0.0 0.0 30 (1310, -251) -0.2 -0.4 0.0 0.0 13 - 35 0 0.11 0.01 0.12
10 (1837, -34) -0.1 -0.2 0.0 0.0 31 (1633, -251) -0.1 -0.3 0.0 0.0 36 - 14 0.15 0 0.01 0.16
11 (1917, -34) 0.0 -0.1 0.0 0.0 32 (1714, -251) -0.1 -0.2 0.0 0.0 15 - 37 0 0.09 0.01 0.1
12 (2319, -34) 0.0 0.0 0.0 0.0 33 (2068, -251) 0.0 -0.1 0.0 0.0 38 - 16 0.09 0.02 0.01 0.1
13 (2399, -34) 0.0 -0.1 0.0 0.0 34 (2148, -251) 0.0 0.0 0.0 0.0 17 - 39 0.05 0.04 0.01 0.06
14 (2765, -34) -0.1 -0.3 0.0 0.0 35 (2542, -251) -0.1 -0.2 0.0 0.0 40 - 18 0.03 0.06 0.01 0.06
15 (2846, -34) -0.2 -0.4 0.0 0.0 36 (2623, -251) -0.1 -0.3 0.0 0.0 19 - 41 0.11 0 0.01 0.12
16 (3210, -34) -0.2 -0.5 0.0 0.0 37 (2987, -251) -0.2 -0.4 0.0 0.0 42 - 20 0.01 0.09 0.01 0.1
17 (3291, -34) -0.2 -0.5 0.0 0.0 38 (3068, -251) -0.2 -0.4 0.0 0.0 21 - 43 0.15 0 0.01 0.17
18 (3655, -34) -0.2 -0.4 0.0 0.0 39 (3432, -251) -0.2 -0.5 0.0 0.0
19 (3736, -34) -0.2 -0.4 0.0 0.0 40 (3513, -251) -0.2 -0.5 0.0 0.0
20 (4099, -34) -0.1 -0.2 0.0 0.0 41 (3877, -251) -0.1 -0.3 0.0 0.0
21 (4181, -34) 0.0 -0.1 0.0 0.0 42 (3958, -251) -0.1 -0.2 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F184

Environment Truss F184 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.22 0.22
Wind Code AS/NZS 1170.2 2-3 0.03 0 0.12 0.13
Code AU 3-4 0.01 0.03 0.28 0.3
Building Function A 4-5 0.03 0 0.16 0.17
Importance Level 2 5-6 0.01 0.02 0.28 0.3
6-7 0.03 0 0.16 0.16
Annual prob. of exceed. - Wind 1:500
7-8 0.01 0.02 0.28 0.3
Annual prob. of exceed. - Snow 1:150
8-9 0.03 0 0.16 0.17
Roof Type Hip
3,554 mm 9 - 10 0.01 0.02 0.28 0.3
Building Length [m] 19.8
10 - 11 0.03 0 0.16 0.16
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 11 - 12 0.01 0.02 0.28 0.3
Avg. Roof Height [m] 6.3 12 - 13 0.03 0.01 0.16 0.16
Enclosed? Enclosed 13 - 14 0.01 0.02 0.28 0.3
14 - 15 0.03 0.01 0.16 0.16
For complete job environment details, refer to the job
15 - 16 0 0 0.22 0.22
Enviroments Report.
Bottom Chord
17 - 18 0 0 0.11 0.13
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 18 - 19 0.01 0.02 0.24 0.25
19 - 20 0.04 0 0.12 0.14
Load Value 20 - 21 0.01 0.02 0.17 0.17
Loaded Width (Actual) 608 21 - 22 0.04 0.01 0.1 0.13
Floor Dead Load (KPa) 0.63 22 - 23 0.01 0.02 0.16 0.17
Floor Live Load (KPa) 1.92
Heel 283 mm BC 3,554 mm Heel 283 mm 23 - 24 0.04 0.01 0.1 0.13
Floor Point Load (KPa) 1.80 24 - 25 0.01 0.02 0.16 0.17
Ceiling Dead Load (KPa) 0.15 25 - 26 0.04 0.01 0.1 0.13
Ceiling Live Load (KPa) 0.00 26 - 27 0.01 0.02 0.16 0.17
Ceiling Point Load (KPa) 1.10 27 - 28 0.04 0.01 0.1 0.13
28 - 29 0.01 0.02 0.16 0.17
29 - 30 0.04 0.01 0.11 0.13
Truss Summary 30 - 31 0.01 0.02 0.17 0.18
31 - 32 0 0 0.08 0.1
Item Value
Webs
Steel 6050-G550-0.75
17 - 1 0.05 0 0 0.06
Width [m] 3.6 Reactions 32 - 16 0.05 0.01 0 0.05
Height [m] 0.3 18 - 2 0.05 0.01 0 0.05
Loaded Width 608 Reaction @ Node 17 Reaction @ Node 20 Reaction @ Node 22 Reaction @ Node 24 Reaction @ Node 26 Reaction @ Node 28 Reaction @ Node 30 Reaction @ Node 32 3 - 19 0.07 0 0.01 0.08
Purlin Spacing 250 Max. Ult 494 Max. Ult 1,454 Max. Ult 1,072 Max. Ult 1,144 Max. Ult 1,130 Max. Ult 1,138 Max. Ult 1,244 Max. Ult 449 20 - 4 0.09 0.01 0.01 0.09
Batten Spacing 600 Min. Ult 89 Min. Ult 271 Min. Ult 196 Min. Ult 210 Min. Ult 208 Min. Ult 207 Min. Ult 234 Min. Ult 80 5 - 21 0.07 0.01 0.01 0.08
BC Span [m] 3.6 22 - 6 0.08 0.01 0.01 0.09
Steel [m] 12.1 7 - 23 0.07 0.01 0.01 0.07
Weight [kg] 12.7 24 - 8 0.08 0.01 0.01 0.09
Max. Deflection Up 0.100 9 - 25 0.07 0.01 0.01 0.07
Max. Deflection Down -0.016 26 - 10 0.08 0.01 0.01 0.09
Max CR - Top Chord 0.30 11 - 27 0.07 0.01 0.01 0.08
Max CR - Bottom Chord 0.25 28 - 12 0.08 0.01 0.01 0.09
Status Pass 13 - 29 0.07 0.01 0.01 0.08
30 - 14 0.08 0.01 0.01 0.09
Nodes / Deflections 15 - 31 0.05 0.02 0 0.05
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1080, -251) 0.0 0.0 0.0 0.0
2 (261, -34) 0.0 0.0 0.0 0.0 23 (1490, -251) 0.0 0.0 0.0 0.0
Dead Load -0.01 1.87 0.00
3 (343, -34) 0.0 0.0 0.0 0.0 24 (1572, -251) 0.0 0.0 0.0 0.0
Live Load -0.02 2.25 0.01
4 (753, -34) 0.0 0.0 0.0 0.0 25 (1982, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (834, -34) 0.0 0.0 0.0 0.0 26 (2063, -251) 0.0 0.0 0.0 0.0
6 (1245, -34) 0.0 0.0 0.0 0.0 27 (2474, -251) 0.0 0.0 0.0 0.0
7 (1326, -34) 0.0 0.0 0.0 0.0 28 (2555, -251) 0.0 0.0 0.0 0.0
8 (1736, -34) 0.0 0.0 0.0 0.0 29 (2965, -251) 0.0 0.0 0.0 0.0
9 (1818, -34) 0.0 0.0 0.0 0.0 30 (3047, -251) 0.0 0.0 0.0 0.0
10 (2228, -34) 0.0 0.0 0.0 0.0 31 (3455, -251) 0.0 0.0 0.0 0.0
11 (2309, -34) 0.0 0.0 0.0 0.0 32 (3528, -251) 0.0 0.0 0.0 0.0
12 (2720, -34) 0.0 0.0 0.0 0.0
13 (2801, -34) 0.0 0.0 0.0 0.0
14 (3211, -34) 0.0 0.0 0.0 0.0
15 (3293, -34) 0.0 0.0 0.0 0.0
16 (3528, -34) 0.0 0.0 0.0 0.0
17 (26, -251) 0.0 0.0 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (507, -251) 0.0 0.0 0.0 0.0
20 (588, -251) 0.0 0.0 0.0 0.0
21 (999, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F185

Environment Truss F185 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.29 0.29
Wind Code AS/NZS 1170.2 2-3 0.11 0 0.29 0.37
Code AU 3-4 0.19 0 0.4 0.52
Building Function A 4-5 0.27 0 0.26 0.49
Importance Level 2 5-6 0.31 0 0.39 0.64
6-7 0.37 0 0.19 0.51
Annual prob. of exceed. - Wind 1:500
7-8 0.37 0 0.41 0.72
Annual prob. of exceed. - Snow 1:150
8-9 0.4 0 0.15 0.53
Roof Type Hip 3,282 mm 9 - 10 0.37 0 0.41 0.72
Building Length [m] 19.8
10 - 11 0.37 0 0.19 0.51
Building Width [m] 25.1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 11 - 12 0.31 0 0.39 0.64
Avg. Roof Height [m] 6.3 12 - 13 0.27 0 0.26 0.49
Enclosed? Enclosed 13 - 14 0.19 0 0.4 0.52
14 - 15 0.11 0 0.29 0.37
For complete job environment details, refer to the job
15 - 16 0 0 0.29 0.29
Enviroments Report.
Bottom Chord
17 - 18 0 0 0.36 0.43
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
18 - 19 0 0.06 0.36 0.42
19 - 20 0 0.11 0.21 0.32
Load Value 20 - 21 0 0.16 0.18 0.32
Loaded Width (Actual) 337 21 - 22 0 0.18 0.15 0.33
Floor Dead Load (KPa) 0.63 22 - 23 0 0.21 0.19 0.36
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,282 mm Heel 283 mm 23 - 24 0 0.21 0.12 0.33
Floor Point Load (KPa) 1.80 24 - 25 0 0.23 0.2 0.36
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.21 0.12 0.33
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.21 0.19 0.36
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.18 0.15 0.33
28 - 29 0 0.16 0.18 0.32
29 - 30 0 0.11 0.21 0.32
Truss Summary 30 - 31 0 0.06 0.36 0.42
31 - 32 0 0 0.36 0.43
Item Value
Webs
Steel 6050-G550-0.75
17 - 1 0.04 0.02 0 0.05
Width [m] 3.3 Reactions 32 - 16 0.04 0.02 0 0.05
Height [m] 0.3 18 - 2 0.19 0 0.02 0.21
Loaded Width 337 Reaction @ Node 17 Reaction @ Node 32 3 - 19 0 0.14 0.02 0.16
Purlin Spacing 250 Max. Ult 2,077 Max. Ult 2,077 20 - 4 0.15 0 0.01 0.16
Batten Spacing 600 Min. Ult 382 Min. Ult 382 5 - 21 0.01 0.1 0.01 0.11
BC Span [m] 3.3 22 - 6 0.11 0.02 0.01 0.12
Steel [m] 11.4 7 - 23 0.04 0.07 0.01 0.08
Weight [kg] 11.9 24 - 8 0.08 0.05 0.01 0.08
Max. Deflection Up 0.100 9 - 25 0.08 0.05 0.01 0.08
Max. Deflection Down -1.782 26 - 10 0.04 0.07 0.01 0.08
Max CR - Top Chord 0.72 11 - 27 0.11 0.02 0.01 0.12
Max CR - Bottom Chord 0.43 28 - 12 0.01 0.1 0.01 0.11
Status Pass 13 - 29 0.15 0 0.01 0.16
30 - 14 0 0.14 0.02 0.16
Nodes / Deflections 15 - 31 0.19 0 0.02 0.21
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1002, -251) -0.6 -1.5 0.0 0.0
2 (242, -34) -0.2 -0.4 0.0 0.0 23 (1374, -251) -0.7 -1.7 0.0 0.0
Dead Load -0.72 10.77 0.07
3 (323, -34) -0.2 -0.6 0.0 0.0 24 (1455, -251) -0.7 -1.8 0.0 0.0
Live Load -1.78 12.92 0.14
4 (695, -34) -0.5 -1.1 0.0 0.0 25 (1827, -251) -0.7 -1.8 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (776, -34) -0.5 -1.3 0.0 0.0 26 (1908, -251) -0.7 -1.7 0.0 0.0
6 (1148, -34) -0.7 -1.6 0.0 0.0 27 (2280, -251) -0.6 -1.5 0.0 0.0
7 (1229, -34) -0.7 -1.7 0.0 0.0 28 (2361, -251) -0.6 -1.4 0.0 0.0
8 (1600, -34) -0.7 -1.8 0.0 0.0 29 (2732, -251) -0.4 -1.0 0.0 0.0
9 (1682, -34) -0.7 -1.8 0.0 0.0 30 (2814, -251) -0.3 -0.8 0.0 0.0
10 (2053, -34) -0.7 -1.7 0.0 0.0 31 (3183, -251) -0.1 -0.2 0.0 0.0
11 (2135, -34) -0.7 -1.6 0.0 0.0 32 (3256, -251) 0.0 0.0 0.0 0.0
12 (2506, -34) -0.5 -1.3 0.0 0.0
13 (2587, -34) -0.5 -1.1 0.0 0.0
14 (2959, -34) -0.2 -0.6 0.0 0.0
15 (3040, -34) -0.2 -0.4 0.0 0.0
16 (3256, -34) 0.0 0.0 0.0 0.0
17 (26, -251) 0.0 0.0 0.0 0.0
18 (99, -251) -0.1 -0.2 0.0 0.0
19 (468, -251) -0.3 -0.8 0.0 0.0
20 (549, -251) -0.4 -1.0 0.0 0.0
21 (921, -251) -0.6 -1.4 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F186
Identical Trusses
Environment Truss F186
F186 F187 F188
Site Data
Elevation ASL [m] 10 3 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.3 0.3
Annual prob. of exceed. - Snow 1:150 2-3 0.11 0 0.3 0.38
Roof Type Hip 3-4 0.2 0 0.4 0.53
3,282 mm 4-5 0.28 0 0.26 0.5
Building Length [m] 19.8
Building Width [m] 25.1 5-6 0.32 0 0.4 0.65
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
6-7 0.38 0 0.19 0.53
Avg. Roof Height [m] 6.3
7-8 0.38 0 0.42 0.74
Enclosed? Enclosed
8-9 0.42 0 0.15 0.54
For complete job environment details, refer to the job 9 - 10 0.38 0 0.42 0.74
Enviroments Report. 10 - 11 0.38 0 0.19 0.53
11 - 12 0.32 0 0.4 0.65
12 - 13 0.28 0 0.26 0.5
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 13 - 14 0.2 0 0.4 0.53
14 - 15 0.11 0 0.3 0.38
Load Value
15 - 16 0 0 0.3 0.3
Loaded Width (Actual) 406 Bottom Chord
Floor Dead Load (KPa) 0.63 17 - 18 0 0 0.37 0.44
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,282 mm Heel 283 mm 18 - 19 0 0.06 0.37 0.43
Floor Point Load (KPa) 1.80 19 - 20 0 0.12 0.21 0.33
Ceiling Dead Load (KPa) 0.15 20 - 21 0 0.16 0.19 0.33
Ceiling Live Load (KPa) 0.00 21 - 22 0 0.19 0.15 0.34
Ceiling Point Load (KPa) 1.10 22 - 23 0 0.22 0.2 0.38
23 - 24 0 0.22 0.12 0.34
24 - 25 0 0.24 0.2 0.37
Truss Summary
25 - 26 0 0.22 0.12 0.34
Item Value 26 - 27 0 0.22 0.2 0.38
Steel 6050-G550-0.75 27 - 28 0 0.19 0.15 0.34
28 - 29 0 0.16 0.19 0.33
Width [m] 3.3 Reactions 29 - 30 0 0.12 0.21 0.33
Height [m] 0.3
30 - 31 0 0.06 0.37 0.43
Loaded Width 406 Reaction @ Node 17 Reaction @ Node 32
31 - 32 0 0 0.37 0.44
Purlin Spacing 250 Max. Ult 2,502 Max. Ult 2,502 Webs
Batten Spacing 600 Min. Ult 460 Min. Ult 460
17 - 1 0.04 0.02 0 0.05
BC Span [m] 3.3 32 - 16 0.04 0.02 0 0.05
Steel [m] 11.4 18 - 2 0.2 0 0.02 0.22
Weight [kg] 11.9 3 - 19 0 0.15 0.02 0.16
Max. Deflection Up 0.100 20 - 4 0.15 0 0.01 0.17
Max. Deflection Down -2.147 5 - 21 0.01 0.1 0.01 0.11
Max CR - Top Chord 0.74 22 - 6 0.11 0.02 0.01 0.12
Max CR - Bottom Chord 0.44 7 - 23 0.04 0.08 0.01 0.08
Status Pass 24 - 8 0.08 0.05 0.01 0.08
Nodes / Deflections 9 - 25 0.08 0.05 0.01 0.08
26 - 10 0.04 0.08 0.01 0.08
BC Deflections Summary 11 - 27 0.11 0.02 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (1002, -251) -0.7 -1.8 0.0 0.0 28 - 12 0.01 0.1 0.01 0.11
Maximum Limit Ratio
2 (242, -34) -0.2 -0.5 0.0 0.0 23 (1374, -251) -0.9 -2.1 0.0 0.0 13 - 29 0.15 0 0.01 0.17
Dead Load -0.87 10.77 0.08
3 (323, -34) -0.3 -0.7 0.0 0.0 24 (1455, -251) -0.9 -2.1 0.0 0.0 30 - 14 0 0.15 0.02 0.16
Live Load -2.15 12.92 0.17
4 (695, -34) -0.6 -1.4 0.0 0.0 25 (1827, -251) -0.9 -2.1 0.0 0.0 15 - 31 0.2 0 0.02 0.22
Dead Load 0.00 0.00 0.00
5 (776, -34) -0.6 -1.5 0.0 0.0 26 (1908, -251) -0.9 -2.1 0.0 0.0
6 (1148, -34) -0.8 -1.9 0.0 0.0 27 (2280, -251) -0.7 -1.8 0.0 0.0
7 (1229, -34) -0.8 -2.0 0.0 0.0 28 (2361, -251) -0.7 -1.7 0.0 0.0
8 (1600, -34) -0.9 -2.2 0.0 0.0 29 (2732, -251) -0.5 -1.1 0.0 0.0
9 (1682, -34) -0.9 -2.2 0.0 0.0 30 (2814, -251) -0.4 -1.0 0.0 0.0
10 (2053, -34) -0.8 -2.0 0.0 0.0 31 (3183, -251) -0.1 -0.2 0.0 0.0
11 (2135, -34) -0.8 -1.9 0.0 0.0 32 (3256, -251) 0.0 0.0 0.0 0.0
12 (2506, -34) -0.6 -1.5 0.0 0.0
13 (2587, -34) -0.6 -1.4 0.0 0.0
14 (2959, -34) -0.3 -0.7 0.0 0.0
15 (3040, -34) -0.2 -0.5 0.0 0.0
16 (3256, -34) 0.0 0.0 0.0 0.0
17 (26, -251) 0.0 0.0 0.0 0.0
18 (99, -251) -0.1 -0.2 0.0 0.0
19 (468, -251) -0.4 -1.0 0.0 0.0
20 (549, -251) -0.5 -1.1 0.0 0.0
21 (921, -251) -0.7 -1.7 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F189

Environment Truss F189 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.27 0.27
Wind Code AS/NZS 1170.2 2-3 0.09 0 0.27 0.33
Code AU 3-4 0.14 0 0.4 0.5
Building Function A 4-5 0.2 0 0.2 0.34
Importance Level 2 5-6 0.17 0 0.38 0.51
1,812 mm 6-7 0.16 0 0.25 0.37
Annual prob. of exceed. - Wind 1:500
7-8 0.08 0 0.45 0.49
Annual prob. of exceed. - Snow 1:150
8-9 0 0 0.26 0.26
Roof Type Hip
1 2 3 4 5 6 7 8 9 Bottom Chord
Building Length [m] 19.8
10 - 11 0 0 0.29 0.34
Building Width [m] 25.1
11 - 12 0 0.05 0.29 0.34
Avg. Roof Height [m] 6.3 12 - 13 0 0.08 0.13 0.21
Enclosed? Enclosed 13 - 14 0 0.11 0.19 0.24
14 - 15 0 0.1 0.1 0.18
For complete job environment details, refer to the job
15 - 16 0 0.09 0.2 0.28
Enviroments Report.
16 - 17 0 0.05 0.2 0.23
17 - 18 0 0 0.14 0.14
Load Summary Webs
10 - 1 0.05 0.02 0 0.05
Load Value 18 - 9 0.11 0 0.01 0.11
10 11 12 13 14 15 16 17 18
Loaded Width (Actual) 406 11 - 2 0.16 0 0.01 0.17
Floor Dead Load (KPa) 0.63 3 - 12 0 0.09 0.01 0.1
Floor Live Load (KPa) 1.92 13 - 4 0.09 0.01 0.01 0.1
Floor Point Load (KPa) 1.80 5 - 14 0.06 0.04 0.01 0.06
Ceiling Dead Load (KPa) 0.15 15 - 6 0.02 0.06 0.01 0.07
Heel 283 mm BC 1,812 mm Heel 283 mm
Ceiling Live Load (KPa) 0.00 7 - 16 0.13 0 0.01 0.14
Ceiling Point Load (KPa) 1.10 17 - 8 0 0.11 0.01 0.12

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.8 Reactions
Height [m] 0.3
Loaded Width 406 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,364 Max. Ult 1,364
Batten Spacing 600 Min. Ult 251 Min. Ult 251
BC Span [m] 1.8
Steel [m] 6.4
Weight [kg] 6.7
Max. Deflection Up 0.100
Max. Deflection Down -0.306
Max CR - Top Chord 0.51
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (258, -34) -0.1 -0.1 0.0 0.0
Dead Load -0.12 5.87 0.02
3 (340, -34) -0.1 -0.2 0.0 0.0
Live Load -0.31 7.04 0.04
4 (744, -34) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (825, -34) -0.1 -0.3 0.0 0.0
6 (1230, -34) -0.1 -0.3 0.0 0.0
7 (1311, -34) -0.1 -0.3 0.0 0.0
8 (1714, -34) 0.0 -0.1 0.0 0.0
9 (1786, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (99, -251) 0.0 -0.1 0.0 0.0
12 (501, -251) -0.1 -0.2 0.0 0.0
13 (582, -251) -0.1 -0.3 0.0 0.0
14 (987, -251) -0.1 -0.3 0.0 0.0
15 (1068, -251) -0.1 -0.3 0.0 0.0
16 (1473, -251) -0.1 -0.2 0.0 0.0
17 (1554, -251) -0.1 -0.1 0.0 0.0
18 (1786, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F190
Identical Trusses
Environment Truss F190
F190 F191 F192 F193
Site Data F194 F195 F196 F197
Elevation ASL [m] 10 F198
Building Data
Wind Code AS/NZS 1170.2 9 Identical Trusses
Code AU
Building Function A Forces
Importance Level 2
Annual prob. of exceed. - Wind 1:500 1,812 mm Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Snow 1:150 Top Chord
Roof Type Hip 1-2 0 0 0.27 0.27
1 2 3 4 5 6 7 8 9
Building Length [m] 19.8 2-3 0.09 0 0.27 0.33
Building Width [m] 25.1 3-4 0.14 0 0.4 0.5
Avg. Roof Height [m] 6.3 4-5 0.2 0 0.2 0.34
Enclosed? Enclosed 5-6 0.17 0 0.38 0.51
6-7 0.16 0 0.25 0.37
For complete job environment details, refer to the job 7-8 0.08 0 0.45 0.49
Enviroments Report. 8-9 0 0 0.26 0.26
Bottom Chord
10 - 11 0 0 0.29 0.34
Load Summary 11 - 12 0 0.05 0.29 0.34
12 - 13 0 0.08 0.13 0.21
Load Value
10 11 12 13 14 15 16 17 18 13 - 14 0 0.11 0.19 0.24
Loaded Width (Actual) 406
14 - 15 0 0.1 0.1 0.18
Floor Dead Load (KPa) 0.63
15 - 16 0 0.09 0.2 0.28
Floor Live Load (KPa) 1.92
16 - 17 0 0.05 0.2 0.23
Floor Point Load (KPa) 1.80 17 - 18 0 0 0.14 0.14
Ceiling Dead Load (KPa) 0.15 Webs
Heel 283 mm BC 1,812 mm Heel 283 mm
Ceiling Live Load (KPa) 0.00 10 - 1 0.05 0.02 0 0.05
Ceiling Point Load (KPa) 1.10 18 - 9 0.11 0 0.01 0.11
11 - 2 0.16 0 0.01 0.17
Truss Summary 3 - 12 0 0.09 0.01 0.1
13 - 4 0.09 0.01 0.01 0.1
Item Value 5 - 14 0.06 0.04 0.01 0.06
Steel 6050-G550-0.75 15 - 6 0.02 0.06 0.01 0.07
7 - 16 0.13 0 0.01 0.14
Width [m] 1.8 Reactions 17 - 8 0 0.11 0.01 0.12
Height [m] 0.3
Loaded Width 406 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,364 Max. Ult 1,364
Batten Spacing 600 Min. Ult 251 Min. Ult 251
BC Span [m] 1.8
Steel [m] 6.4
Weight [kg] 6.7
Max. Deflection Up 0.100
Max. Deflection Down -0.306
Max CR - Top Chord 0.51
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (258, -34) -0.1 -0.1 0.0 0.0
Dead Load -0.12 5.87 0.02
3 (340, -34) -0.1 -0.2 0.0 0.0
Live Load -0.31 7.04 0.04
4 (744, -34) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (825, -34) -0.1 -0.3 0.0 0.0
6 (1230, -34) -0.1 -0.3 0.0 0.0
7 (1311, -34) -0.1 -0.3 0.0 0.0
8 (1714, -34) 0.0 -0.1 0.0 0.0
9 (1786, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (99, -251) 0.0 -0.1 0.0 0.0
12 (501, -251) -0.1 -0.2 0.0 0.0
13 (582, -251) -0.1 -0.3 0.0 0.0
14 (987, -251) -0.1 -0.3 0.0 0.0
15 (1068, -251) -0.1 -0.3 0.0 0.0
16 (1473, -251) -0.1 -0.2 0.0 0.0
17 (1554, -251) -0.1 -0.1 0.0 0.0
18 (1786, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F199

Environment Truss F199 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.27 0.27
Wind Code AS/NZS 1170.2 2-3 0.09 0 0.27 0.33
Code AU 3-4 0.14 0 0.4 0.5
Building Function A 4-5 0.2 0 0.2 0.34
Importance Level 2 5-6 0.17 0 0.38 0.51
1,812 mm 6-7 0.16 0 0.25 0.37
Annual prob. of exceed. - Wind 1:500
7-8 0.08 0 0.45 0.49
Annual prob. of exceed. - Snow 1:150
8-9 0 0 0.26 0.26
Roof Type Hip
1 2 3 4 5 6 7 8 9 Bottom Chord
Building Length [m] 19.8
10 - 11 0 0 0.29 0.34
Building Width [m] 25.1
11 - 12 0 0.05 0.29 0.34
Avg. Roof Height [m] 6.3 12 - 13 0 0.08 0.13 0.21
Enclosed? Enclosed 13 - 14 0 0.11 0.19 0.24
14 - 15 0 0.1 0.1 0.18
For complete job environment details, refer to the job
15 - 16 0 0.09 0.2 0.28
Enviroments Report.
16 - 17 0 0.05 0.2 0.23
17 - 18 0 0 0.14 0.14
Load Summary Webs
10 - 1 0.05 0.02 0 0.05
Load Value 18 - 9 0.11 0 0.01 0.11
10 11 12 13 14 15 16 17 18
Loaded Width (Actual) 400 11 - 2 0.16 0 0.01 0.17
Floor Dead Load (KPa) 0.63 3 - 12 0 0.09 0.01 0.1
Floor Live Load (KPa) 1.92 13 - 4 0.09 0.01 0.01 0.1
Floor Point Load (KPa) 1.80 5 - 14 0.06 0.04 0.01 0.06
Ceiling Dead Load (KPa) 0.15 15 - 6 0.02 0.06 0.01 0.07
Heel 283 mm BC 1,812 mm Heel 283 mm
Ceiling Live Load (KPa) 0.00 7 - 16 0.13 0 0.01 0.14
Ceiling Point Load (KPa) 1.10 17 - 8 0 0.11 0.01 0.12

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.8 Reactions
Height [m] 0.3
Loaded Width 400 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,343 Max. Ult 1,343
Batten Spacing 600 Min. Ult 247 Min. Ult 247
BC Span [m] 1.8
Steel [m] 6.4
Weight [kg] 6.7
Max. Deflection Up 0.100
Max. Deflection Down -0.301
Max CR - Top Chord 0.51
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (258, -34) -0.1 -0.1 0.0 0.0
Dead Load -0.12 5.87 0.02
3 (340, -34) -0.1 -0.2 0.0 0.0
Live Load -0.30 7.04 0.04
4 (744, -34) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (825, -34) -0.1 -0.3 0.0 0.0
6 (1230, -34) -0.1 -0.3 0.0 0.0
7 (1311, -34) -0.1 -0.3 0.0 0.0
8 (1714, -34) 0.0 -0.1 0.0 0.0
9 (1786, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (99, -251) 0.0 -0.1 0.0 0.0
12 (501, -251) -0.1 -0.2 0.0 0.0
13 (582, -251) -0.1 -0.3 0.0 0.0
14 (987, -251) -0.1 -0.3 0.0 0.0
15 (1068, -251) -0.1 -0.3 0.0 0.0
16 (1473, -251) -0.1 -0.2 0.0 0.0
17 (1554, -251) -0.1 -0.1 0.0 0.0
18 (1786, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F200

Environment Truss F200 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.29 0.29
Wind Code AS/NZS 1170.2 2-3 0.1 0 0.29 0.36
Code AU 3-4 0.16 0 0.43 0.54
Building Function A 4-5 0.22 0 0.21 0.37
Importance Level 2 5-6 0.18 0 0.41 0.55
6-7 0.18 0 0.27 0.4
Annual prob. of exceed. - Wind 1:500 1,976 mm 7-8 0.09 0 0.48 0.52
Annual prob. of exceed. - Snow 1:150
8-9 0 0 0.26 0.26
Roof Type Hip
1 2 3 4 5 6 7 8 9 Bottom Chord
Building Length [m] 19.8
10 - 11 0 0 0.28 0.34
Building Width [m] 25.1
11 - 12 0 0.06 0.28 0.34
Avg. Roof Height [m] 6.3 12 - 13 0 0.09 0.13 0.22
Enclosed? Enclosed 13 - 14 0 0.13 0.2 0.26
14 - 15 0 0.11 0.1 0.19
For complete job environment details, refer to the job
15 - 16 0 0.1 0.21 0.28
Enviroments Report.
16 - 17 0 0.05 0.19 0.23
17 - 18 0 0 0.14 0.14
Load Summary Webs
10 - 1 0.05 0.02 0 0.05
Load Value 10 11 12 13 14 15 16 17 18 18 - 9 0.11 0 0.01 0.11
Loaded Width (Actual) 355 11 - 2 0.16 0 0.02 0.17
Floor Dead Load (KPa) 0.63 3 - 12 0 0.09 0.01 0.1
Floor Live Load (KPa) 1.92 13 - 4 0.09 0.01 0.01 0.1
Floor Point Load (KPa) 1.80 5 - 14 0.06 0.04 0.01 0.06
Ceiling Dead Load (KPa) 0.15 Heel 283 mm BC 1,976 mm Heel 283 mm 15 - 6 0.02 0.06 0.01 0.07
Ceiling Live Load (KPa) 0.00 7 - 16 0.14 0 0.01 0.15
Ceiling Point Load (KPa) 1.10 17 - 8 0 0.11 0.01 0.12

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 2.0 Reactions
Height [m] 0.3
Loaded Width 355 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,303 Max. Ult 1,303
Batten Spacing 600 Min. Ult 240 Min. Ult 240
BC Span [m] 2.0
Steel [m] 6.8
Weight [kg] 7.1
Max. Deflection Up 0.100
Max. Deflection Down -0.344
Max CR - Top Chord 0.55
Max CR - Bottom Chord 0.34
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (282, -34) -0.1 -0.2 0.0 0.0
Dead Load -0.14 6.41 0.02
3 (363, -34) -0.1 -0.2 0.0 0.0
Live Load -0.34 7.69 0.04
4 (814, -34) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (895, -34) -0.1 -0.3 0.0 0.0
6 (1347, -34) -0.1 -0.3 0.0 0.0
7 (1428, -34) -0.1 -0.3 0.0 0.0
8 (1877, -34) 0.0 -0.1 0.0 0.0
9 (1950, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (98, -251) 0.0 -0.1 0.0 0.0
12 (548, -251) -0.1 -0.3 0.0 0.0
13 (629, -251) -0.1 -0.3 0.0 0.0
14 (1080, -251) -0.1 -0.3 0.0 0.0
15 (1161, -251) -0.1 -0.3 0.0 0.0
16 (1613, -251) -0.1 -0.2 0.0 0.0
17 (1694, -251) -0.1 -0.2 0.0 0.0
18 (1950, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F201
Identical Trusses
Environment Truss F201
F201 F202 F203 F205
Site Data F206 F207 F208 F209
Elevation ASL [m] 10 F210 F211
Building Data
Wind Code AS/NZS 1170.2 10 Identical Trusses
Code AU
Building Function A Forces
Importance Level 2
Annual prob. of exceed. - Wind 1:500 1,976 mm Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Snow 1:150 Top Chord
Roof Type Hip 1-2 0 0 0.29 0.29
Building Length [m] 19.8 1 2 3 4 5 6 7 8 9 2-3 0.11 0 0.29 0.37
Building Width [m] 25.1 3-4 0.16 0 0.43 0.54
Avg. Roof Height [m] 6.3 4-5 0.22 0 0.21 0.38
Enclosed? Enclosed 5-6 0.19 0 0.42 0.55
6-7 0.18 0 0.27 0.4
For complete job environment details, refer to the job 7-8 0.09 0 0.49 0.53
Enviroments Report. 8-9 0 0 0.26 0.26
Bottom Chord
10 - 11 0 0 0.29 0.35
Load Summary 11 - 12 0 0.06 0.29 0.35
12 - 13 0 0.09 0.13 0.22
Load Value 10 11 12 13 14 15 16 17 18 13 - 14 0 0.13 0.2 0.26
Loaded Width (Actual) 406
14 - 15 0 0.11 0.1 0.19
Floor Dead Load (KPa) 0.63
15 - 16 0 0.11 0.21 0.29
Floor Live Load (KPa) 1.92
16 - 17 0 0.05 0.2 0.23
Floor Point Load (KPa) 1.80 17 - 18 0 0 0.14 0.14
Ceiling Dead Load (KPa) 0.15 Heel 283 mm BC 1,976 mm Heel 283 mm Webs
Ceiling Live Load (KPa) 0.00 10 - 1 0.05 0.02 0 0.05
Ceiling Point Load (KPa) 1.10 18 - 9 0.11 0 0.01 0.12
11 - 2 0.16 0 0.02 0.18
Truss Summary 3 - 12 0 0.09 0.01 0.1
13 - 4 0.09 0.01 0.01 0.1
Item Value 5 - 14 0.06 0.04 0.01 0.06
Steel 6050-G550-0.75 15 - 6 0.02 0.06 0.01 0.07
7 - 16 0.14 0 0.01 0.15
Width [m] 2.0 Reactions 17 - 8 0 0.11 0.01 0.12
Height [m] 0.3
Loaded Width 406 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,490 Max. Ult 1,490
Batten Spacing 600 Min. Ult 274 Min. Ult 274
BC Span [m] 2.0
Steel [m] 6.8
Weight [kg] 7.1
Max. Deflection Up 0.100
Max. Deflection Down -0.394
Max CR - Top Chord 0.55
Max CR - Bottom Chord 0.35
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (282, -34) -0.1 -0.2 0.0 0.0
Dead Load -0.16 6.41 0.02
3 (363, -34) -0.1 -0.3 0.0 0.0
Live Load -0.39 7.69 0.05
4 (814, -34) -0.2 -0.4 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (895, -34) -0.2 -0.4 0.0 0.0
6 (1347, -34) -0.1 -0.4 0.0 0.0
7 (1428, -34) -0.1 -0.3 0.0 0.0
8 (1877, -34) 0.0 -0.1 0.0 0.0
9 (1950, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (98, -251) 0.0 -0.1 0.0 0.0
12 (548, -251) -0.1 -0.3 0.0 0.0
13 (629, -251) -0.1 -0.3 0.0 0.0
14 (1080, -251) -0.2 -0.4 0.0 0.0
15 (1161, -251) -0.2 -0.4 0.0 0.0
16 (1613, -251) -0.1 -0.3 0.0 0.0
17 (1694, -251) -0.1 -0.2 0.0 0.0
18 (1950, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F204

Environment Truss F204 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.29 0.29
Wind Code AS/NZS 1170.2 2-3 0.11 0 0.29 0.37
Code AU 3-4 0.16 0 0.43 0.54
Building Function A 4-5 0.22 0 0.21 0.38
Importance Level 2 5-6 0.19 0 0.42 0.55
6-7 0.18 0 0.27 0.4
Annual prob. of exceed. - Wind 1:500 1,976 mm 7-8 0.09 0 0.49 0.53
Annual prob. of exceed. - Snow 1:150
8-9 0 0 0.26 0.26
Roof Type Hip
1 2 3 4 5 6 7 8 9 Bottom Chord
Building Length [m] 19.8
10 - 11 0 0 0.29 0.35
Building Width [m] 25.1
11 - 12 0 0.06 0.29 0.35
Avg. Roof Height [m] 6.3 12 - 13 0 0.09 0.13 0.22
Enclosed? Enclosed 13 - 14 0 0.13 0.2 0.26
14 - 15 0 0.11 0.1 0.19
For complete job environment details, refer to the job
15 - 16 0 0.11 0.21 0.29
Enviroments Report.
16 - 17 0 0.05 0.2 0.23
17 - 18 0 0 0.14 0.14
Load Summary Webs
10 - 1 0.05 0.02 0 0.05
Load Value 10 11 12 13 14 15 16 17 18 18 - 9 0.11 0 0.01 0.12
Loaded Width (Actual) 406 11 - 2 0.16 0 0.02 0.18
Floor Dead Load (KPa) 0.63 3 - 12 0 0.09 0.01 0.1
Floor Live Load (KPa) 1.92 13 - 4 0.09 0.01 0.01 0.1
Floor Point Load (KPa) 1.80 5 - 14 0.06 0.04 0.01 0.06
Ceiling Dead Load (KPa) 0.15 Heel 283 mm BC 1,976 mm Heel 283 mm 15 - 6 0.02 0.06 0.01 0.07
Ceiling Live Load (KPa) 0.00 7 - 16 0.14 0 0.01 0.15
Ceiling Point Load (KPa) 1.10 17 - 8 0 0.11 0.01 0.12

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 2.0 Reactions
Height [m] 0.3
Loaded Width 406 Reaction @ Node 10 Reaction @ Node 18
Purlin Spacing 250 Max. Ult 1,490 Max. Ult 1,490
Batten Spacing 600 Min. Ult 274 Min. Ult 274
BC Span [m] 2.0
Steel [m] 6.8
Weight [kg] 7.1
Max. Deflection Up 0.100
Max. Deflection Down -0.394
Max CR - Top Chord 0.55
Max CR - Bottom Chord 0.35
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (282, -34) -0.1 -0.2 0.0 0.0
Dead Load -0.16 6.41 0.02
3 (363, -34) -0.1 -0.3 0.0 0.0
Live Load -0.39 7.69 0.05
4 (814, -34) -0.2 -0.4 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (895, -34) -0.2 -0.4 0.0 0.0
6 (1347, -34) -0.1 -0.4 0.0 0.0
7 (1428, -34) -0.1 -0.3 0.0 0.0
8 (1877, -34) 0.0 -0.1 0.0 0.0
9 (1950, -34) 0.0 0.0 0.0 0.0
10 (26, -251) 0.0 0.0 0.0 0.0
11 (98, -251) 0.0 -0.1 0.0 0.0
12 (548, -251) -0.1 -0.3 0.0 0.0
13 (629, -251) -0.1 -0.3 0.0 0.0
14 (1080, -251) -0.2 -0.4 0.0 0.0
15 (1161, -251) -0.2 -0.4 0.0 0.0
16 (1613, -251) -0.1 -0.3 0.0 0.0
17 (1694, -251) -0.1 -0.2 0.0 0.0
18 (1950, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F212
Identical Trusses
Environment Truss F212
F212 F213
Site Data
Elevation ASL [m] 10 2 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.21 0.21
1,976 mm
Annual prob. of exceed. - Snow 1:150 2-3 0.06 0 0.21 0.25
Roof Type Hip 3-4 0.08 0 0.36 0.42
Building Length [m] 19.8 1 2 3 4 5 6 7 8 9 10 11 4-5 0.11 0 0.18 0.25
Building Width [m] 25.1 5-6 0.06 0.01 0.32 0.36
6-7 0.04 0.01 0.23 0.26
Avg. Roof Height [m] 6.3
7-8 0 0.02 0.25 0.27
Enclosed? Enclosed
8-9 0.03 0.02 0.14 0.15
For complete job environment details, refer to the job 9 - 10 0.02 0.01 0.34 0.34
Enviroments Report. 10 - 11 0 0 0.14 0.14
Bottom Chord
12 - 13 0 0 0.24 0.28
Load Summary 13 - 14 0 0.04 0.24 0.27
14 - 15 0 0.05 0.09 0.14
Load Value 12 13 14 15 16 17 18 19 20 21 22 15 - 16 0.01 0.06 0.17 0.2
Loaded Width (Actual) 406
16 - 17 0.01 0.04 0.13 0.17
Floor Dead Load (KPa) 0.63 17 - 18 0.02 0.02 0.13 0.14
Floor Live Load (KPa) 1.92 18 - 19 0.04 0 0.13 0.14
Floor Point Load (KPa) 1.80 19 - 20 0.03 0.02 0.16 0.18
Ceiling Dead Load (KPa) 0.15 Heel 283 mm BC 1,976 mm Heel 283 mm 20 - 21 0.01 0.01 0.11 0.13
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.09 0.1
Ceiling Point Load (KPa) 1.10 Webs
12 - 1 0.05 0.02 0 0.05
22 - 11 0.08 0.01 0.01 0.09
Truss Summary
13 - 2 0.12 0 0.01 0.13
Item Value 3 - 14 0 0.06 0.01 0.07
Steel 6050-G550-0.75 15 - 4 0.05 0.02 0 0.05
5 - 16 0.09 0 0.01 0.09
Width [m] 2.0 Reactions 17 - 6 0.01 0.07 0.01 0.08
Height [m] 0.3
7 - 18 0.12 0 0.01 0.13
Loaded Width 406 Reaction @ Node 12 Reaction @ Node 18 Reaction @ Node 22
19 - 8 0.09 0 0.01 0.09
Purlin Spacing 250 Max. Ult 846 Max. Ult 1,909 Max. Ult 226
9 - 20 0.04 0.03 0 0.04
Batten Spacing 600 Min. Ult 156 Min. Ult 351 Min. Ult 42
21 - 10 0.03 0.03 0 0.04
BC Span [m] 2.0
Steel [m] 7.2
Weight [kg] 7.5
Max. Deflection Up 0.100
Max. Deflection Down -0.096
Max CR - Top Chord 0.42
Max CR - Bottom Chord 0.28
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1950, -251) 0.0 0.0 0.0 0.0
2 (224, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.04 4.25 0.01
3 (306, -34) 0.0 -0.1 0.0 0.0
Live Load -0.10 5.10 0.02
4 (643, -34) 0.0 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (724, -34) 0.0 -0.1 0.0 0.0
6 (1063, -34) 0.0 0.0 0.0 0.0
7 (1143, -34) 0.0 0.0 0.0 0.0
8 (1513, -34) 0.0 0.0 0.0 0.0
9 (1592, -34) 0.0 0.0 0.0 0.0
10 (1878, -34) 0.0 0.0 0.0 0.0
11 (1950, -34) 0.0 0.0 0.0 0.0
12 (26, -251) 0.0 0.0 0.0 0.0
13 (99, -251) 0.0 0.0 0.0 0.0
14 (433, -251) 0.0 -0.1 0.0 0.0
15 (515, -251) 0.0 -0.1 0.0 0.0
16 (852, -251) 0.0 -0.1 0.0 0.0
17 (933, -251) 0.0 -0.1 0.0 0.0
18 (1301, -251) 0.0 0.0 0.0 0.0
19 (1380, -251) 0.0 0.0 0.0 0.0
20 (1696, -251) 0.0 0.0 0.0 0.0
21 (1777, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F214

Environment Truss F214 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.21 0.21
Wind Code AS/NZS 1170.2 2-3 0.06 0 0.21 0.25
Code AU 3-4 0.08 0 0.36 0.42
Building Function A 4-5 0.11 0 0.18 0.25
Importance Level 2 5-6 0.06 0.01 0.32 0.36
6-7 0.04 0.01 0.23 0.26
Annual prob. of exceed. - Wind 1:500 1,976 mm 7-8 0 0.02 0.25 0.27
Annual prob. of exceed. - Snow 1:150
8-9 0.03 0.02 0.14 0.15
Roof Type Hip
1 2 3 4 5 6 7 8 9 10 11 9 - 10 0.02 0.01 0.34 0.34
Building Length [m] 19.8
10 - 11 0 0 0.14 0.14
Building Width [m] 25.1 Bottom Chord
Avg. Roof Height [m] 6.3 12 - 13 0 0 0.24 0.28
Enclosed? Enclosed 13 - 14 0 0.04 0.24 0.27
14 - 15 0 0.05 0.09 0.14
For complete job environment details, refer to the job
15 - 16 0.01 0.06 0.17 0.2
Enviroments Report.
16 - 17 0.01 0.04 0.13 0.17
17 - 18 0.02 0.02 0.13 0.14
Load Summary 18 - 19 0.04 0 0.13 0.14
19 - 20 0.03 0.02 0.16 0.18
Load Value 12 13 14 15 16 17 18 19 20 21 22 20 - 21 0.01 0.01 0.11 0.13
Loaded Width (Actual) 400 21 - 22 0 0 0.09 0.1
Floor Dead Load (KPa) 0.63 Webs
Floor Live Load (KPa) 1.92 12 - 1 0.05 0.02 0 0.05
Floor Point Load (KPa) 1.80 22 - 11 0.08 0.01 0.01 0.09
Ceiling Dead Load (KPa) 0.15 Heel 283 mm BC 1,976 mm Heel 283 mm 13 - 2 0.12 0 0.01 0.13
Ceiling Live Load (KPa) 0.00 3 - 14 0 0.06 0.01 0.07
Ceiling Point Load (KPa) 1.10 15 - 4 0.05 0.02 0 0.05
5 - 16 0.09 0 0.01 0.09
17 - 6 0.01 0.07 0.01 0.08
Truss Summary 7 - 18 0.12 0 0.01 0.13
19 - 8 0.09 0 0.01 0.09
Item Value
9 - 20 0.04 0.03 0 0.04
Steel 6050-G550-0.75
21 - 10 0.03 0.03 0 0.04
Width [m] 2.0 Reactions
Height [m] 0.3
Loaded Width 400 Reaction @ Node 12 Reaction @ Node 18 Reaction @ Node 22
Purlin Spacing 250 Max. Ult 834 Max. Ult 1,880 Max. Ult 222
Batten Spacing 600 Min. Ult 153 Min. Ult 346 Min. Ult 41
BC Span [m] 2.0
Steel [m] 7.2
Weight [kg] 7.5
Max. Deflection Up 0.100
Max. Deflection Down -0.094
Max CR - Top Chord 0.42
Max CR - Bottom Chord 0.28
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1950, -251) 0.0 0.0 0.0 0.0
2 (224, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.04 4.25 0.01
3 (306, -34) 0.0 -0.1 0.0 0.0
Live Load -0.09 5.10 0.02
4 (643, -34) 0.0 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (724, -34) 0.0 -0.1 0.0 0.0
6 (1063, -34) 0.0 0.0 0.0 0.0
7 (1143, -34) 0.0 0.0 0.0 0.0
8 (1513, -34) 0.0 0.0 0.0 0.0
9 (1592, -34) 0.0 0.0 0.0 0.0
10 (1878, -34) 0.0 0.0 0.0 0.0
11 (1950, -34) 0.0 0.0 0.0 0.0
12 (26, -251) 0.0 0.0 0.0 0.0
13 (99, -251) 0.0 0.0 0.0 0.0
14 (433, -251) 0.0 -0.1 0.0 0.0
15 (515, -251) 0.0 -0.1 0.0 0.0
16 (852, -251) 0.0 -0.1 0.0 0.0
17 (933, -251) 0.0 -0.1 0.0 0.0
18 (1301, -251) 0.0 0.0 0.0 0.0
19 (1380, -251) 0.0 0.0 0.0 0.0
20 (1696, -251) 0.0 0.0 0.0 0.0
21 (1777, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F217

Environment Truss F217 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.18 0.18
Wind Code AS/NZS 1170.2 2-3 0.03 0 0.15 0.15
Code AU 3-4 0.02 0.02 0.26 0.28
Building Function A 4-5 0.03 0 0.15 0.15
Importance Level 2 5-6 0.01 0.02 0.26 0.28
6-7 0.03 0 0.14 0.15
Annual prob. of exceed. - Wind 1:500
7-8 0.01 0.02 0.26 0.28
Annual prob. of exceed. - Snow 1:150
8-9 0.03 0 0.14 0.15
Roof Type Hip
9 - 10 0.01 0.02 0.26 0.28
Building Length [m] 19.8
5,250 mm 10 - 11 0.03 0 0.14 0.15
Building Width [m] 25.1
11 - 12 0.01 0.02 0.26 0.28
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 12 - 13 0.03 0 0.14 0.15
Enclosed? Enclosed 13 - 14 0.01 0.02 0.26 0.28
14 - 15 0.03 0 0.14 0.15
For complete job environment details, refer to the job
15 - 16 0.01 0.02 0.26 0.28
Enviroments Report.
16 - 17 0.03 0 0.15 0.15
17 - 18 0 0.02 0.26 0.28
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
Load Summary 18 - 19 0.03 0.01 0.12 0.12
19 - 20 0.01 0.02 0.26 0.28
Load Value 20 - 21 0.04 0 0.16 0.18
Loaded Width (Actual) 400 21 - 22 0.02 0 0.29 0.3
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 5,250 mm Heel 283 mm 22 - 23 0.04 0 0.12 0.15
Floor Live Load (KPa) 1.92 23 - 24 0 0 0.21 0.21
Floor Point Load (KPa) 1.80 Bottom Chord
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0 0.12 0.12
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.02 0.16 0.16
Ceiling Point Load (KPa) 1.10 27 - 28 0.04 0.01 0.1 0.13
28 - 29 0 0.02 0.15 0.16
29 - 30 0.03 0.01 0.1 0.12
Truss Summary 30 - 31 0.01 0.02 0.15 0.16
31 - 32 0.04 0.01 0.1 0.12
Item Value
32 - 33 0.01 0.02 0.15 0.16
Steel 6050-G550-0.75
33 - 34 0.04 0.01 0.1 0.12
Width [m] 5.2 Reactions 34 - 35 0.01 0.02 0.15 0.16
Height [m] 0.3 35 - 36 0.04 0.01 0.1 0.12
Loaded Width 400 Reaction @ Node 26 Reaction @ Node 27 Reaction @ Node 29 Reaction @ Node 31 Reaction @ Node 33 Reaction @ Node 35 Reaction @ Node 37 Reaction @ Node 39 36 - 37 0.01 0.02 0.15 0.16
Purlin Spacing 250 Max. Ult 399 Max. Ult 604 Max. Ult 768 Max. Ult 704 Max. Ult 715 Max. Ult 707 Max. Ult 711 Max. Ult 664 37 - 38 0.04 0.01 0.1 0.12
Batten Spacing 600 Min. Ult 73 Min. Ult 113 Min. Ult 140 Min. Ult 130 Min. Ult 132 Min. Ult 130 Min. Ult 131 Min. Ult 122 38 - 39 0.01 0.02 0.15 0.16
BC Span [m] 5.2 39 - 40 0.04 0.01 0.1 0.12
Steel [m] 17.9 40 - 41 0.01 0.02 0.16 0.16
Weight [kg] 18.7 41 - 42 0.04 0 0.1 0.13
Reaction @ Node 41 Reaction @ Node 44 Reaction @ Node 45 Reaction @ Node 49
Max. Deflection Up 0.100 42 - 43 0.01 0.01 0.2 0.2
Max. Ult 854 Max. Ult 844 Max. Ult 474 Max. Ult 489 43 - 44 0.04 0 0.1 0.13
Max. Deflection Down -0.032
Min. Ult 158 Min. Ult 153 Min. Ult 90 Min. Ult 89 44 - 45 0 0.02 0.19 0.2
Max CR - Top Chord 0.30
Max CR - Bottom Chord 0.25 45 - 46 0 0.02 0.19 0.2
Status Pass 46 - 47 0.01 0.01 0.14 0.15
47 - 48 0 0.02 0.21 0.25
Nodes / Deflections 48 - 49 0 0 0.15 0.18
BC Deflections Summary Webs
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4919, -34) 0.0 0.0 0.0 0.0 43 (4219, -251) 0.0 0.0 0.0 0.0 25 - 1 0.04 0.01 0 0.05
Maximum Limit Ratio 49 - 24 0.05 0.01 0 0.05
2 (249, -34) 0.0 0.0 0.0 0.0 23 (5001, -34) 0.0 0.0 0.0 0.0 44 (4300, -251) 0.0 0.0 0.0 0.0
Dead Load -0.01 2.03 0.01 26 - 2 0.06 0.01 0.01 0.06
3 (330, -34) 0.0 0.0 0.0 0.0 24 (5224, -34) 0.0 0.0 0.0 0.0 45 (4614, -251) 0.0 0.0 0.0 0.0
Live Load -0.03 2.44 0.01 3 - 27 0.08 0.01 0.01 0.08
4 (716, -34) 0.0 0.0 0.0 0.0 25 (26, -251) 0.0 0.0 0.0 0.0 46 (4686, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00 28 - 4 0.07 0.01 0.01 0.07
5 (797, -34) 0.0 0.0 0.0 0.0 26 (99, -251) 0.0 0.0 0.0 0.0 47 (4767, -251) 0.0 0.0 0.0 0.0
6 (1183, -34) 0.0 0.0 0.0 0.0 27 (482, -251) 0.0 0.0 0.0 0.0 48 (5151, -251) 0.0 0.0 0.0 0.0 5 - 29 0.08 0.01 0.01 0.09
7 (1264, -34) 0.0 0.0 0.0 0.0 28 (564, -251) 0.0 0.0 0.0 0.0 49 (5224, -251) 0.0 0.0 0.0 0.0 30 - 6 0.06 0.01 0.01 0.07
8 (1650, -34) 0.0 0.0 0.0 0.0 29 (949, -251) 0.0 0.0 0.0 0.0 7 - 31 0.08 0.01 0.01 0.09
9 (1731, -34) 0.0 0.0 0.0 0.0 30 (1031, -251) 0.0 0.0 0.0 0.0 32 - 8 0.06 0.01 0.01 0.07
10 (2117, -34) 0.0 0.0 0.0 0.0 31 (1416, -251) 0.0 0.0 0.0 0.0 9 - 33 0.08 0.01 0.01 0.09
11 (2199, -34) 0.0 0.0 0.0 0.0 32 (1498, -251) 0.0 0.0 0.0 0.0 34 - 10 0.06 0.01 0.01 0.07
12 (2584, -34) 0.0 0.0 0.0 0.0 33 (1884, -251) 0.0 0.0 0.0 0.0 11 - 35 0.08 0.01 0.01 0.09
13 (2666, -34) 0.0 0.0 0.0 0.0 34 (1965, -251) 0.0 0.0 0.0 0.0 36 - 12 0.06 0.01 0.01 0.07
14 (3051, -34) 0.0 0.0 0.0 0.0 35 (2351, -251) 0.0 0.0 0.0 0.0 13 - 37 0.08 0.01 0.01 0.09
15 (3133, -34) 0.0 0.0 0.0 0.0 36 (2432, -251) 0.0 0.0 0.0 0.0 38 - 14 0.06 0.01 0.01 0.07
16 (3518, -34) 0.0 0.0 0.0 0.0 37 (2818, -251) 0.0 0.0 0.0 0.0 15 - 39 0.08 0.01 0.01 0.09
17 (3600, -34) 0.0 0.0 0.0 0.0 38 (2899, -251) 0.0 0.0 0.0 0.0 40 - 16 0.06 0.01 0.01 0.07
18 (3985, -34) 0.0 0.0 0.0 0.0 39 (3285, -251) 0.0 0.0 0.0 0.0 17 - 41 0.08 0.01 0.01 0.09
19 (4067, -34) 0.0 0.0 0.0 0.0 40 (3366, -251) 0.0 0.0 0.0 0.0 42 - 18 0.07 0 0.01 0.08
20 (4453, -34) 0.0 0.0 0.0 0.0 41 (3752, -251) 0.0 0.0 0.0 0.0 19 - 43 0.07 0.01 0.01 0.08
21 (4534, -34) 0.0 0.0 0.0 0.0 42 (3833, -251) 0.0 0.0 0.0 0.0 44 - 20 0.08 0 0.01 0.09

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F217 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
21 - 46 0.05 0.01 0.01 0.06
47 - 22 0.04 0.01 0 0.05
23 - 48 0.07 0 0.01 0.08

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F218

Environment Truss F218 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.21 0.21
Wind Code AS/NZS 1170.2 2-3 0.08 0 0.21 0.27
Code AU 3-4 0.14 0 0.28 0.37
Building Function A 4-5 0.19 0 0.19 0.35
Importance Level 2 5-6 0.23 0 0.27 0.45
6-7 0.27 0 0.14 0.38
Annual prob. of exceed. - Wind 1:500
7-8 0.27 0 0.29 0.52
Annual prob. of exceed. - Snow 1:150
8-9 0.3 0 0.1 0.39
Roof Type Hip
9 - 10 0.29 0 0.29 0.54
Building Length [m] 19.8
5,322 mm 10 - 11 0.3 0 0.11 0.39
Building Width [m] 25.1
11 - 12 0.28 0 0.29 0.52
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 12 - 13 0.27 0 0.14 0.38
Enclosed? Enclosed 13 - 14 0.23 0 0.28 0.47
14 - 15 0.22 0 0.18 0.35
For complete job environment details, refer to the job
15 - 16 0.16 0 0.26 0.38
Enviroments Report.
16 - 17 0.14 0 0.23 0.33
17 - 18 0.08 0.02 0.27 0.33
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
Load Summary 18 - 19 0.04 0.06 0.23 0.25
19 - 20 0 0.11 0.23 0.26
Load Value 20 - 21 0 0.12 0.2 0.23
Loaded Width (Actual) 406 21 - 22 0 0.13 0.2 0.26
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 5,322 mm Heel 283 mm 22 - 23 0.01 0.07 0.25 0.32
Floor Live Load (KPa) 1.92 23 - 24 0 0 0.25 0.25
Floor Point Load (KPa) 1.80 Bottom Chord
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0 0.26 0.31
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.06 0.26 0.31
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.1 0.15 0.25
28 - 29 0 0.14 0.13 0.26
29 - 30 0 0.17 0.11 0.28
Truss Summary 30 - 31 0 0.2 0.14 0.31
31 - 32 0 0.2 0.1 0.3
Item Value
32 - 33 0 0.22 0.14 0.32
Steel 6050-G550-0.95
33 - 34 0 0.22 0.08 0.29
Width [m] 5.3 Reactions 34 - 35 0 0.22 0.14 0.33
Height [m] 0.3 35 - 36 0 0.2 0.1 0.3
Loaded Width 406 Reaction @ Node 25 Reaction @ Node 45 Reaction @ Node 48 36 - 37 0 0.2 0.14 0.32
Purlin Spacing 250 Max. Ult 3,022 Max. Ult 8,560 Max. Ult -629 37 - 38 0 0.17 0.12 0.29
Batten Spacing 600 Min. Ult 556 Min. Ult 1,575 Min. Ult -3,417 38 - 39 0 0.16 0.13 0.29
BC Span [m] 5.3 39 - 40 0 0.12 0.13 0.25
Steel [m] 18.1 40 - 41 0 0.1 0.13 0.23
Weight [kg] 23.9 41 - 42 0.02 0.06 0.18 0.22
Max. Deflection Up 0.068 42 - 43 0.09 0.03 0.37 0.42
Max. Deflection Down -4.347 43 - 44 0.14 0 0.37 0.48
Max CR - Top Chord 0.54 44 - 45 0.16 0 0.69 0.82
Max CR - Bottom Chord 0.82 45 - 46 0.16 0 0.69 0.82
Status Pass 46 - 47 0.18 0 0.4 0.54
47 - 48 0.1 0 0.4 0.47
Nodes / Deflections 48 - 49 0 0 0.1 0.1
BC Deflections Summary Webs
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4988, -34) 0.0 -0.1 0.0 0.0 43 (4278, -251) -0.4 -1.1 0.0 0.0 25 - 1 0.03 0.02 0 0.03
Maximum Limit Ratio 49 - 24 0.04 0 0 0.04
2 (252, -34) -0.3 -0.8 0.0 0.0 23 (5070, -34) 0.0 -0.1 0.0 0.0 44 (4359, -251) -0.3 -0.8 0.0 0.0
Dead Load -1.76 12.00 0.15 26 - 2 0.13 0 0.01 0.14
3 (334, -34) -0.4 -1.1 0.0 0.0 24 (5296, -34) 0.0 0.1 0.0 0.0 45 (4614, -251) 0.0 0.0 0.0 0.0
Live Load -4.35 18.35 0.24 3 - 27 0 0.12 0.01 0.13
4 (726, -34) -0.9 -2.2 0.0 0.0 25 (26, -251) 0.0 0.0 0.0 0.0 46 (4752, -251) -0.1 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00 28 - 4 0.1 0 0.01 0.11
5 (807, -34) -1.0 -2.5 0.0 0.0 26 (99, -251) -0.1 -0.3 0.0 0.0 47 (4833, -251) -0.1 -0.2 0.0 0.0
6 (1200, -34) -1.4 -3.3 0.0 0.0 27 (489, -251) -0.6 -1.5 0.0 0.0 48 (5223, -251) 0.0 0.0 0.0 0.0 5 - 29 0 0.09 0.01 0.09
7 (1281, -34) -1.4 -3.5 0.0 0.0 28 (570, -251) -0.7 -1.8 0.0 0.0 49 (5296, -251) 0.0 0.1 0.0 0.0 30 - 6 0.08 0.01 0.01 0.08
8 (1673, -34) -1.7 -4.1 0.0 0.0 29 (963, -251) -1.1 -2.8 0.0 0.0 7 - 31 0.02 0.07 0 0.07
9 (1754, -34) -1.7 -4.2 0.0 0.0 30 (1044, -251) -1.2 -3.0 0.0 0.0 32 - 8 0.06 0.03 0 0.06
10 (2147, -34) -1.8 -4.4 0.0 0.0 31 (1436, -251) -1.5 -3.8 0.0 0.0 9 - 33 0.04 0.05 0 0.05
11 (2228, -34) -1.8 -4.4 0.0 0.0 32 (1517, -251) -1.6 -3.9 0.0 0.0 34 - 10 0.04 0.05 0 0.06
12 (2620, -34) -1.7 -4.2 0.0 0.0 33 (1910, -251) -1.7 -4.3 0.0 0.0 11 - 35 0.06 0.03 0 0.07
13 (2702, -34) -1.7 -4.1 0.0 0.0 34 (1991, -251) -1.8 -4.3 0.0 0.0 36 - 12 0.02 0.07 0 0.08
14 (3094, -34) -1.5 -3.6 0.0 0.0 35 (2383, -251) -1.8 -4.3 0.0 0.0 13 - 37 0.08 0.01 0.01 0.09
15 (3175, -34) -1.4 -3.5 0.0 0.0 36 (2465, -251) -1.7 -4.3 0.0 0.0 38 - 14 0 0.09 0.01 0.1
16 (3568, -34) -1.1 -2.7 0.0 0.0 37 (2857, -251) -1.6 -4.0 0.0 0.0 15 - 39 0.1 0 0.01 0.11
17 (3649, -34) -1.0 -2.5 0.0 0.0 38 (2938, -251) -1.6 -3.8 0.0 0.0 40 - 16 0 0.11 0.01 0.12
18 (4041, -34) -0.7 -1.7 0.0 0.0 39 (3331, -251) -1.3 -3.2 0.0 0.0 17 - 41 0.12 0 0.01 0.13
19 (4123, -34) -0.6 -1.4 0.0 0.0 40 (3412, -251) -1.2 -3.0 0.0 0.0 42 - 18 0 0.15 0.01 0.15
20 (4515, -34) -0.2 -0.5 0.0 0.0 41 (3804, -251) -0.9 -2.2 0.0 0.0 19 - 43 0.14 0 0.01 0.15
21 (4596, -34) -0.1 -0.4 0.0 0.0 42 (3886, -251) -0.8 -2.0 0.0 0.0 44 - 20 0.02 0.06 0 0.06

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F218 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
21 - 46 0.06 0 0 0.06
47 - 22 0.15 0 0.01 0.16
23 - 48 0.01 0.16 0.01 0.17

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F219
Identical Trusses
Environment Truss F219
F219 F220 F221
Site Data
Elevation ASL [m] 10 3 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.23 0.23
Annual prob. of exceed. - Snow 1:150 2-3 0.09 0 0.23 0.3
Roof Type Hip 3-4 0.18 0 0.28 0.39
Building Length [m] 19.8 4-5 0.26 0 0.21 0.41
5,266 mm 5-6 0.32 0 0.28 0.51
Building Width [m] 25.1
6-7 0.37 0 0.17 0.51
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
7-8 0.42 0 0.3 0.62
Enclosed? Enclosed
8-9 0.46 0 0.16 0.58
For complete job environment details, refer to the job 9 - 10 0.49 0 0.31 0.69
Enviroments Report. 10 - 11 0.51 0 0.15 0.61
11 - 12 0.52 0 0.32 0.73
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 12 - 13 0.53 0 0.13 0.6
Load Summary 13 - 14 0.52 0 0.32 0.73
14 - 15 0.51 0 0.15 0.61
Load Value
15 - 16 0.49 0 0.31 0.69
Loaded Width (Actual) 406
16 - 17 0.46 0 0.16 0.58
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 5,266 mm Heel 283 mm
17 - 18 0.42 0 0.3 0.62
Floor Live Load (KPa) 1.92 18 - 19 0.37 0 0.17 0.51
Floor Point Load (KPa) 1.80 19 - 20 0.32 0 0.28 0.51
Ceiling Dead Load (KPa) 0.15 20 - 21 0.26 0 0.21 0.41
Ceiling Live Load (KPa) 0.00 21 - 22 0.18 0 0.28 0.39
Ceiling Point Load (KPa) 1.10 22 - 23 0.09 0 0.23 0.3
23 - 24 0 0 0.23 0.23
Bottom Chord
Truss Summary
25 - 26 0 0 0.3 0.37
Item Value 26 - 27 0 0.07 0.3 0.37
Steel 6050-G550-0.95 27 - 28 0 0.13 0.17 0.3
28 - 29 0 0.19 0.16 0.35
Width [m] 5.3 Reactions 29 - 30 0 0.23 0.16 0.39
Height [m] 0.3
30 - 31 0 0.28 0.16 0.43
Loaded Width 406 Reaction @ Node 25 Reaction @ Node 48
31 - 32 0 0.31 0.14 0.45
Purlin Spacing 250 Max. Ult 4,039 Max. Ult 4,039
32 - 33 0 0.34 0.15 0.48
Batten Spacing 600 Min. Ult 743 Min. Ult 743
33 - 34 0 0.36 0.13 0.47
BC Span [m] 5.3 34 - 35 0 0.38 0.16 0.49
Steel [m] 18.0 35 - 36 0 0.38 0.11 0.47
Weight [kg] 23.8 36 - 37 0 0.39 0.16 0.48
Max. Deflection Up 0.100 37 - 38 0 0.38 0.11 0.47
Max. Deflection Down -10.155 38 - 39 0 0.38 0.16 0.49
Max CR - Top Chord 0.73 39 - 40 0 0.36 0.13 0.47
Max CR - Bottom Chord 0.49 40 - 41 0 0.34 0.15 0.48
Status Pass 41 - 42 0 0.31 0.14 0.45
Nodes / Deflections 42 - 43 0 0.28 0.16 0.43
43 - 44 0 0.23 0.16 0.39
BC Deflections Summary 44 - 45 0 0.19 0.16 0.35
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4935, -34) -0.8 -2.0 0.0 0.0 43 (4232, -251) -2.4 -6.0 0.0 0.0 45 - 46 0 0.13 0.17 0.3
Maximum Limit Ratio
2 (250, -34) -0.6 -1.5 0.0 0.0 23 (5016, -34) -0.6 -1.5 0.0 0.0 44 (4313, -251) -2.3 -5.5 0.0 0.0 46 - 47 0 0.07 0.3 0.37
Dead Load -4.13 12.00 0.34
3 (331, -34) -0.8 -2.0 0.0 0.0 24 (5240, -34) 0.0 0.0 0.0 0.0 45 (4701, -251) -1.4 -3.4 0.0 0.0 47 - 48 0 0 0.3 0.37
Live Load -10.15 20.86 0.49
4 (718, -34) -1.7 -4.3 0.0 0.0 25 (26, -251) 0.0 0.0 0.0 0.0 46 (4782, -251) -1.2 -2.9 0.0 0.0 Webs
Dead Load 0.00 0.00 0.00
5 (800, -34) -1.9 -4.8 0.0 0.0 26 (99, -251) -0.2 -0.6 0.0 0.0 47 (5167, -251) -0.2 -0.6 0.0 0.0 25 - 1 0.03 0.02 0 0.03
6 (1187, -34) -2.7 -6.7 0.0 0.0 27 (484, -251) -1.2 -2.9 0.0 0.0 48 (5240, -251) 0.0 0.0 0.0 0.0 48 - 24 0.03 0.02 0 0.03
7 (1268, -34) -2.9 -7.1 0.0 0.0 28 (565, -251) -1.4 -3.4 0.0 0.0 26 - 2 0.16 0 0.01 0.17
8 (1655, -34) -3.5 -8.6 0.0 0.0 29 (952, -251) -2.3 -5.5 0.0 0.0 3 - 27 0 0.15 0.01 0.16
9 (1737, -34) -3.6 -8.8 0.0 0.0 30 (1034, -251) -2.4 -6.0 0.0 0.0 28 - 4 0.13 0 0.01 0.14
10 (2124, -34) -4.0 -9.8 0.0 0.0 31 (1421, -251) -3.1 -7.7 0.0 0.0 5 - 29 0 0.11 0.01 0.12
11 (2205, -34) -4.0 -9.9 0.0 0.0 32 (1502, -251) -3.3 -8.0 0.0 0.0 30 - 6 0.1 0 0.01 0.11
12 (2592, -34) -4.2 -10.2 0.0 0.0 33 (1889, -251) -3.8 -9.3 0.0 0.0 7 - 31 0 0.1 0.01 0.1
13 (2674, -34) -4.2 -10.2 0.0 0.0 34 (1971, -251) -3.8 -9.5 0.0 0.0 32 - 8 0.09 0.01 0.01 0.09
14 (3061, -34) -4.0 -9.9 0.0 0.0 35 (2358, -251) -4.1 -10.1 0.0 0.0 9 - 33 0.02 0.08 0.01 0.08
15 (3142, -34) -4.0 -9.8 0.0 0.0 36 (2439, -251) -4.1 -10.2 0.0 0.0 34 - 10 0.07 0.03 0 0.07
16 (3529, -34) -3.6 -8.8 0.0 0.0 37 (2827, -251) -4.1 -10.2 0.0 0.0 11 - 35 0.03 0.06 0 0.07
17 (3611, -34) -3.5 -8.6 0.0 0.0 38 (2908, -251) -4.1 -10.1 0.0 0.0 36 - 12 0.05 0.05 0 0.05
18 (3998, -34) -2.9 -7.1 0.0 0.0 39 (3295, -251) -3.8 -9.5 0.0 0.0 13 - 37 0.05 0.05 0 0.05
19 (4079, -34) -2.7 -6.7 0.0 0.0 40 (3376, -251) -3.8 -9.3 0.0 0.0 38 - 14 0.03 0.06 0 0.07
20 (4467, -34) -1.9 -4.8 0.0 0.0 41 (3764, -251) -3.3 -8.0 0.0 0.0 15 - 39 0.07 0.03 0 0.07
21 (4548, -34) -1.7 -4.3 0.0 0.0 42 (3845, -251) -3.1 -7.7 0.0 0.0 40 - 16 0.02 0.08 0.01 0.08

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F219 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
17 - 41 0.09 0.01 0.01 0.09
42 - 18 0 0.1 0.01 0.1
19 - 43 0.1 0 0.01 0.11
44 - 20 0 0.11 0.01 0.12
21 - 45 0.13 0 0.01 0.14
46 - 22 0 0.15 0.01 0.16
23 - 47 0.16 0 0.01 0.17

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F222

Environment Truss F222 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.24 0.24
Wind Code AS/NZS 1170.2 2-3 0.1 0 0.24 0.31
Code AU 3-4 0.19 0 0.29 0.41
Building Function A 4-5 0.27 0 0.21 0.42
Importance Level 2 5-6 0.32 0 0.3 0.53
6-7 0.38 0 0.16 0.5
Annual prob. of exceed. - Wind 1:500
7-8 0.42 0 0.32 0.64
Annual prob. of exceed. - Snow 1:150
8-9 0.46 0 0.15 0.56
Roof Type Hip
9 - 10 0.48 0 0.33 0.71
Building Length [m] 19.8
5,189 mm 10 - 11 0.49 0 0.13 0.57
Building Width [m] 25.1
11 - 12 0.49 0 0.33 0.73
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 12 - 13 0.49 0 0.14 0.57
Enclosed? Enclosed 13 - 14 0.47 0 0.33 0.7
14 - 15 0.45 0 0.15 0.55
For complete job environment details, refer to the job
15 - 16 0.41 0 0.32 0.63
Enviroments Report.
16 - 17 0.37 0 0.16 0.48
17 - 18 0.31 0 0.3 0.52
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
Load Summary 18 - 19 0.24 0 0.2 0.39
19 - 20 0.16 0 0.26 0.36
Load Value 20 - 21 0.09 0 0.26 0.32
Loaded Width (Actual) 406 21 - 22 0 0 0.26 0.26
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 5,189 mm Heel 283 mm Bottom Chord
Floor Live Load (KPa) 1.92 23 - 24 0 0 0.29 0.35
Floor Point Load (KPa) 1.80 24 - 25 0 0.07 0.29 0.36
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.14 0.16 0.29
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.2 0.15 0.34
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.24 0.14 0.38
28 - 29 0 0.28 0.15 0.42
29 - 30 0 0.31 0.13 0.43
Truss Summary 30 - 31 0 0.34 0.16 0.46
31 - 32 0 0.35 0.12 0.45
Item Value
32 - 33 0 0.36 0.16 0.46
Steel 6050-G550-0.95
33 - 34 0 0.36 0.1 0.43
Width [m] 5.2 Reactions 34 - 35 0 0.36 0.16 0.46
Height [m] 0.3 35 - 36 0 0.35 0.12 0.45
Loaded Width 406 Reaction @ Node 23 Reaction @ Node 43 36 - 37 0 0.33 0.16 0.46
Purlin Spacing 250 Max. Ult 3,923 Max. Ult 4,036 37 - 38 0 0.3 0.13 0.43
Batten Spacing 600 Min. Ult 722 Min. Ult 743 38 - 39 0 0.27 0.15 0.41
BC Span [m] 5.2 39 - 40 0 0.23 0.14 0.37
Steel [m] 17.4 40 - 41 0 0.18 0.18 0.36
Weight [kg] 23.0 41 - 42 0 0.12 0.18 0.3
Max. Deflection Up 0.400 42 - 43 0 0.06 0.12 0.18
Max. Deflection Down -9.057 43 - 44 0 0 0.07 0.07
Max CR - Top Chord 0.73 Webs
Max CR - Bottom Chord 0.46 23 - 1 0.03 0.02 0 0.03
Status Pass 44 - 22 0.02 0.02 0 0.03
24 - 2 0.16 0 0.01 0.16
Nodes / Deflections 3 - 25 0 0.15 0.01 0.15
BC Deflections Summary 26 - 4 0.13 0 0.01 0.13
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (5163, -34) 0.2 0.4 0.0 0.0 43 (5091, -251) 0.0 0.0 0.0 0.0 5 - 27 0 0.11 0.01 0.11
Maximum Limit Ratio 28 - 6 0.1 0 0.01 0.1
2 (269, -34) -0.6 -1.5 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (5163, -251) 0.2 0.4 0.0 0.0
Dead Load -3.68 12.00 0.31 7 - 29 0.01 0.09 0.01 0.1
3 (351, -34) -0.8 -2.0 0.0 0.0 24 (99, -251) -0.2 -0.5 0.0 0.0
Live Load -9.06 20.26 0.45 30 - 8 0.08 0.02 0.01 0.08
4 (777, -34) -1.7 -4.2 0.0 0.0 25 (523, -251) -1.2 -2.9 0.0 0.0
Dead Load 0.00 0.00 0.00 9 - 31 0.03 0.07 0 0.08
5 (858, -34) -1.9 -4.6 0.0 0.0 26 (604, -251) -1.4 -3.4 0.0 0.0
6 (1285, -34) -2.6 -6.5 0.0 0.0 27 (1031, -251) -2.2 -5.4 0.0 0.0 32 - 10 0.06 0.04 0 0.06
7 (1366, -34) -2.8 -6.8 0.0 0.0 28 (1112, -251) -2.4 -5.8 0.0 0.0 11 - 33 0.04 0.05 0 0.06
8 (1793, -34) -3.3 -8.1 0.0 0.0 29 (1539, -251) -3.0 -7.4 0.0 0.0 34 - 12 0.04 0.06 0 0.06
9 (1874, -34) -3.4 -8.3 0.0 0.0 30 (1620, -251) -3.1 -7.7 0.0 0.0 13 - 35 0.06 0.03 0 0.07
10 (2300, -34) -3.6 -9.0 0.0 0.0 31 (2046, -251) -3.5 -8.6 0.0 0.0 36 - 14 0.02 0.07 0 0.08
11 (2381, -34) -3.7 -9.0 0.0 0.0 32 (2127, -251) -3.6 -8.8 0.0 0.0 15 - 37 0.08 0.01 0.01 0.09
12 (2808, -34) -3.6 -9.0 0.0 0.0 33 (2554, -251) -3.7 -9.1 0.0 0.0 38 - 16 0 0.09 0.01 0.1
13 (2889, -34) -3.6 -8.9 0.0 0.0 34 (2635, -251) -3.7 -9.0 0.0 0.0 17 - 39 0.1 0 0.01 0.11
14 (3316, -34) -3.3 -8.1 0.0 0.0 35 (3062, -251) -3.5 -8.6 0.0 0.0 40 - 18 0 0.11 0.01 0.12
15 (3397, -34) -3.2 -7.9 0.0 0.0 36 (3143, -251) -3.4 -8.5 0.0 0.0 19 - 41 0.13 0 0.01 0.14
16 (3823, -34) -2.6 -6.5 0.0 0.0 37 (3569, -251) -3.0 -7.4 0.0 0.0 42 - 20 0 0.12 0.01 0.13
17 (3905, -34) -2.5 -6.1 0.0 0.0 38 (3651, -251) -2.9 -7.1 0.0 0.0 21 - 43 0.14 0 0.01 0.15
18 (4331, -34) -1.7 -4.2 0.0 0.0 39 (4077, -251) -2.2 -5.4 0.0 0.0
19 (4412, -34) -1.5 -3.7 0.0 0.0 40 (4158, -251) -2.0 -5.0 0.0 0.0
20 (4839, -34) -0.6 -1.4 0.0 0.0 41 (4585, -251) -1.2 -2.9 0.0 0.0
21 (4920, -34) -0.4 -0.9 0.0 0.0 42 (4666, -251) -1.0 -2.4 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F223

Environment Truss F223 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.22 0.22
Wind Code AS/NZS 1170.2 2-3 0.08 0 0.22 0.28
Code AU 3-4 0.16 0 0.28 0.38
Building Function A 4-5 0.22 0 0.2 0.39
Importance Level 2 5-6 0.27 0 0.28 0.49
6-7 0.32 0 0.16 0.43
Annual prob. of exceed. - Wind 1:500
7-8 0.36 0 0.3 0.58
Annual prob. of exceed. - Snow 1:150
8-9 0.39 0 0.14 0.48
Roof Type Hip
9 - 10 0.4 0 0.3 0.64
Building Length [m] 19.8 4,783 mm 10 - 11 0.42 0 0.12 0.51
Building Width [m] 25.1
11 - 12 0.42 0 0.31 0.66
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
12 - 13 0.42 0 0.13 0.5
Enclosed? Enclosed 13 - 14 0.4 0 0.3 0.63
14 - 15 0.38 0 0.15 0.47
For complete job environment details, refer to the job
15 - 16 0.35 0 0.29 0.57
Enviroments Report.
16 - 17 0.31 0 0.16 0.43
17 - 18 0.26 0 0.28 0.47
Load Summary 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 18 - 19 0.2 0 0.2 0.36
19 - 20 0.14 0 0.25 0.33
Load Value 20 - 21 0.07 0 0.24 0.3
Loaded Width (Actual) 406 21 - 22 0 0 0.24 0.24
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,783 mm Heel 283 mm Bottom Chord
Floor Live Load (KPa) 1.92 23 - 24 0 0 0.28 0.34
Floor Point Load (KPa) 1.80 24 - 25 0 0.06 0.28 0.34
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.12 0.16 0.27
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.17 0.14 0.31
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.2 0.14 0.33
28 - 29 0 0.24 0.14 0.37
29 - 30 0 0.26 0.13 0.37
Truss Summary 30 - 31 0 0.28 0.15 0.4
31 - 32 0 0.3 0.11 0.39
Item Value
32 - 33 0 0.31 0.15 0.41
Steel 6050-G550-0.95
33 - 34 0 0.31 0.1 0.38
Width [m] 4.8 Reactions 34 - 35 0 0.31 0.15 0.41
Height [m] 0.3 35 - 36 0 0.29 0.11 0.39
Loaded Width 406 Reaction @ Node 23 Reaction @ Node 43 36 - 37 0 0.28 0.15 0.4
Purlin Spacing 250 Max. Ult 3,608 Max. Ult 3,722 37 - 38 0 0.25 0.13 0.37
Batten Spacing 600 Min. Ult 664 Min. Ult 685 38 - 39 0 0.23 0.14 0.36
BC Span [m] 4.8 39 - 40 0 0.19 0.14 0.32
Steel [m] 16.4 40 - 41 0 0.15 0.17 0.32
Weight [kg] 21.6 41 - 42 0 0.1 0.17 0.27
Max. Deflection Up 0.317 42 - 43 0 0.05 0.13 0.17
Max. Deflection Down -6.590 43 - 44 0 0 0.07 0.08
Max CR - Top Chord 0.66 Webs
Max CR - Bottom Chord 0.41 23 - 1 0.03 0.02 0 0.03
Status Pass 44 - 22 0.02 0.02 0 0.03
24 - 2 0.14 0 0.01 0.15
Nodes / Deflections 3 - 25 0 0.14 0.01 0.14
BC Deflections Summary 26 - 4 0.12 0 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (4757, -34) 0.1 0.3 0.0 0.0 43 (4685, -251) 0.0 0.0 0.0 0.0 5 - 27 0 0.1 0.01 0.11
Maximum Limit Ratio 28 - 6 0.09 0 0.01 0.1
2 (249, -34) -0.4 -1.1 0.0 0.0 23 (26, -251) 0.0 0.0 0.0 0.0 44 (4757, -251) 0.1 0.3 0.0 0.0
Dead Load -2.68 12.00 0.22 7 - 29 0.01 0.09 0.01 0.09
3 (330, -34) -0.6 -1.5 0.0 0.0 24 (99, -251) -0.2 -0.4 0.0 0.0
Live Load -6.59 18.63 0.35 30 - 8 0.08 0.02 0 0.08
4 (716, -34) -1.3 -3.1 0.0 0.0 25 (482, -251) -0.9 -2.1 0.0 0.0
Dead Load 0.00 0.00 0.00 9 - 31 0.03 0.07 0 0.07
5 (797, -34) -1.4 -3.4 0.0 0.0 26 (564, -251) -1.0 -2.5 0.0 0.0
6 (1183, -34) -1.9 -4.7 0.0 0.0 27 (950, -251) -1.6 -3.9 0.0 0.0 32 - 10 0.06 0.04 0 0.06
7 (1265, -34) -2.0 -5.0 0.0 0.0 28 (1031, -251) -1.7 -4.3 0.0 0.0 11 - 33 0.04 0.05 0 0.05
8 (1650, -34) -2.4 -5.9 0.0 0.0 29 (1417, -251) -2.2 -5.4 0.0 0.0 34 - 12 0.04 0.05 0 0.06
9 (1732, -34) -2.5 -6.1 0.0 0.0 30 (1498, -251) -2.3 -5.6 0.0 0.0 13 - 35 0.06 0.03 0 0.07
10 (2117, -34) -2.6 -6.5 0.0 0.0 31 (1884, -251) -2.6 -6.3 0.0 0.0 36 - 14 0.02 0.07 0 0.08
11 (2199, -34) -2.7 -6.6 0.0 0.0 32 (1965, -251) -2.6 -6.4 0.0 0.0 15 - 37 0.08 0.02 0.01 0.08
12 (2585, -34) -2.6 -6.5 0.0 0.0 33 (2351, -251) -2.7 -6.6 0.0 0.0 38 - 16 0 0.09 0.01 0.1
13 (2666, -34) -2.6 -6.4 0.0 0.0 34 (2432, -251) -2.7 -6.6 0.0 0.0 17 - 39 0.1 0 0.01 0.1
14 (3052, -34) -2.4 -5.9 0.0 0.0 35 (2818, -251) -2.6 -6.3 0.0 0.0 40 - 18 0 0.11 0.01 0.12
15 (3133, -34) -2.3 -5.7 0.0 0.0 36 (2899, -251) -2.5 -6.2 0.0 0.0 19 - 41 0.12 0 0.01 0.12
16 (3519, -34) -1.9 -4.7 0.0 0.0 37 (3285, -251) -2.2 -5.4 0.0 0.0 42 - 20 0 0.12 0.01 0.12
17 (3600, -34) -1.8 -4.4 0.0 0.0 38 (3366, -251) -2.1 -5.1 0.0 0.0 21 - 43 0.13 0 0.01 0.13
18 (3986, -34) -1.2 -3.1 0.0 0.0 39 (3752, -251) -1.6 -3.9 0.0 0.0
19 (4067, -34) -1.1 -2.7 0.0 0.0 40 (3834, -251) -1.5 -3.6 0.0 0.0
20 (4453, -34) -0.4 -1.1 0.0 0.0 41 (4219, -251) -0.8 -2.1 0.0 0.0
21 (4534, -34) -0.3 -0.7 0.0 0.0 42 (4301, -251) -0.7 -1.7 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F224

Environment Truss F224 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.32 0.32
Wind Code AS/NZS 1170.2 2-3 0.13 0 0.32 0.42
Code AU 3-4 0.23 0 0.42 0.57
Building Function A 4-5 0.34 0 0.29 0.58
Importance Level 2 5-6 0.4 0 0.42 0.75
6-7 0.47 0 0.22 0.65
Annual prob. of exceed. - Wind 1:500
7-8 0.5 0 0.45 0.89
Annual prob. of exceed. - Snow 1:150
8-9 0.56 0 0.2 0.71
Roof Type Hip
9 - 10 0.55 0 0.46 0.96
Building Length [m] 19.8 4,377 mm 10 - 11 0.58 0 0.18 0.74
Building Width [m] 25.1
11 - 12 0.55 0 0.46 0.95
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.55 0 0.2 0.7
Enclosed? Enclosed 13 - 14 0.49 0 0.45 0.87
14 - 15 0.46 0 0.23 0.64
For complete job environment details, refer to the job
15 - 16 0.38 0 0.43 0.73
Enviroments Report.
16 - 17 0.31 0 0.28 0.55
17 - 18 0.2 0 0.38 0.51
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.11 0 0.35 0.44
19 - 20 0 0 0.35 0.35
Load Value Bottom Chord
Loaded Width (Actual) 406 21 - 22 0 0 0.4 0.48
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,377 mm Heel 283 mm 22 - 23 0 0.07 0.4 0.47
Floor Live Load (KPa) 1.92 23 - 24 0 0.14 0.24 0.37
Floor Point Load (KPa) 1.80 24 - 25 0 0.2 0.2 0.38
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.23 0.19 0.42
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.28 0.21 0.46
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.29 0.17 0.46
28 - 29 0 0.32 0.22 0.49
29 - 30 0 0.32 0.14 0.46
Truss Summary 30 - 31 0 0.34 0.22 0.49
31 - 32 0 0.32 0.15 0.46
Item Value
32 - 33 0 0.32 0.22 0.49
Steel 6050-G550-0.75
33 - 34 0 0.28 0.17 0.46
Width [m] 4.4 Reactions 34 - 35 0 0.26 0.21 0.45
Height [m] 0.3 35 - 36 0 0.22 0.19 0.41
Loaded Width 406 Reaction @ Node 21 Reaction @ Node 39 36 - 37 0 0.18 0.23 0.4
Purlin Spacing 250 Max. Ult 3,293 Max. Ult 3,408 37 - 38 0 0.12 0.23 0.34
Batten Spacing 600 Min. Ult 606 Min. Ult 627 38 - 39 0 0.07 0.18 0.24
BC Span [m] 4.4 39 - 40 0 0 0.11 0.11
Steel [m] 15.0 Webs
Weight [kg] 15.6 21 - 1 0.04 0.02 0 0.05
Max. Deflection Up 0.308 40 - 20 0.04 0.03 0 0.04
Max. Deflection Down -5.864 22 - 2 0.22 0 0.02 0.24
Max CR - Top Chord 0.96 3 - 23 0 0.16 0.02 0.18
Max CR - Bottom Chord 0.49 24 - 4 0.18 0 0.02 0.19
Status Pass 5 - 25 0 0.12 0.01 0.14
26 - 6 0.14 0.01 0.01 0.15
Nodes / Deflections 7 - 27 0.02 0.1 0.01 0.11
BC Deflections Summary 28 - 8 0.11 0.03 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) -0.2 -0.4 0.0 0.0 9 - 29 0.05 0.08 0.01 0.08
Maximum Limit Ratio 30 - 10 0.08 0.05 0.01 0.09
2 (252, -34) -0.4 -1.1 0.0 0.0 23 (489, -251) -0.9 -2.1 0.0 0.0
Dead Load -2.38 12.00 0.20 11 - 31 0.08 0.05 0.01 0.09
3 (334, -34) -0.6 -1.5 0.0 0.0 24 (570, -251) -1.0 -2.5 0.0 0.0
Live Load -5.86 17.01 0.34 32 - 12 0.05 0.08 0.01 0.09
4 (726, -34) -1.2 -3.0 0.0 0.0 25 (963, -251) -1.6 -3.9 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0.12 0.03 0.01 0.12
5 (808, -34) -1.4 -3.4 0.0 0.0 26 (1044, -251) -1.7 -4.1 0.0 0.0
6 (1200, -34) -1.9 -4.6 0.0 0.0 27 (1437, -251) -2.1 -5.1 0.0 0.0 34 - 14 0.02 0.1 0.01 0.11
7 (1281, -34) -2.0 -4.8 0.0 0.0 28 (1518, -251) -2.2 -5.3 0.0 0.0 15 - 35 0.15 0 0.01 0.16
8 (1674, -34) -2.3 -5.6 0.0 0.0 29 (1911, -251) -2.4 -5.8 0.0 0.0 36 - 16 0 0.13 0.02 0.14
9 (1755, -34) -2.3 -5.7 0.0 0.0 30 (1992, -251) -2.4 -5.9 0.0 0.0 17 - 37 0.18 0 0.02 0.19
10 (2148, -34) -2.4 -5.9 0.0 0.0 31 (2385, -251) -2.4 -5.8 0.0 0.0 38 - 18 0 0.14 0.02 0.15
11 (2229, -34) -2.4 -5.9 0.0 0.0 32 (2466, -251) -2.3 -5.7 0.0 0.0 19 - 39 0.2 0 0.02 0.21
12 (2622, -34) -2.3 -5.6 0.0 0.0 33 (2859, -251) -2.1 -5.1 0.0 0.0
13 (2703, -34) -2.2 -5.4 0.0 0.0 34 (2940, -251) -2.0 -4.9 0.0 0.0
14 (3096, -34) -1.9 -4.6 0.0 0.0 35 (3333, -251) -1.6 -3.8 0.0 0.0
15 (3177, -34) -1.8 -4.3 0.0 0.0 36 (3414, -251) -1.4 -3.5 0.0 0.0
16 (3570, -34) -1.2 -3.0 0.0 0.0 37 (3807, -251) -0.8 -2.1 0.0 0.0
17 (3651, -34) -1.1 -2.7 0.0 0.0 38 (3888, -251) -0.7 -1.7 0.0 0.0
18 (4043, -34) -0.4 -1.0 0.0 0.0 39 (4279, -251) 0.0 0.0 0.0 0.0
19 (4125, -34) -0.3 -0.6 0.0 0.0 40 (4351, -251) 0.1 0.3 0.0 0.0
20 (4351, -34) 0.1 0.3 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F225

Environment Truss F225 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.32 0.32
Wind Code AS/NZS 1170.2 2-3 0.12 0 0.32 0.41
Code AU 3-4 0.23 0 0.42 0.57
Building Function A 4-5 0.32 0 0.28 0.56
Importance Level 2 5-6 0.38 0 0.42 0.73
6-7 0.45 0 0.2 0.61
Annual prob. of exceed. - Wind 1:500
7-8 0.46 0 0.45 0.85
Annual prob. of exceed. - Snow 1:150
8-9 0.51 0 0.17 0.65
Roof Type Hip
9 - 10 0.49 0 0.46 0.88
Building Length [m] 19.8 3,971 mm
10 - 11 0.5 0 0.17 0.65
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 11 - 12 0.45 0 0.45 0.84
Avg. Roof Height [m] 6.3 12 - 13 0.43 0 0.22 0.61
Enclosed? Enclosed 13 - 14 0.36 0 0.43 0.71
14 - 15 0.3 0 0.27 0.53
For complete job environment details, refer to the job
15 - 16 0.2 0 0.38 0.51
Enviroments Report.
16 - 17 0.11 0 0.35 0.43
17 - 18 0 0 0.35 0.35
Load Summary 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Bottom Chord
19 - 20 0 0 0.38 0.46
Load Value 20 - 21 0 0.07 0.38 0.46
Loaded Width (Actual) 406 21 - 22 0 0.13 0.23 0.36
Floor Dead Load (KPa) 0.63 22 - 23 0 0.19 0.2 0.36
Heel 283 mm BC 3,971 mm Heel 283 mm
Floor Live Load (KPa) 1.92 23 - 24 0 0.22 0.17 0.39
Floor Point Load (KPa) 1.80 24 - 25 0 0.26 0.21 0.43
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.27 0.15 0.41
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.3 0.22 0.44
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.28 0.12 0.4
28 - 29 0 0.29 0.22 0.45
29 - 30 0 0.26 0.15 0.41
Truss Summary 30 - 31 0 0.25 0.21 0.42
31 - 32 0 0.21 0.17 0.38
Item Value
32 - 33 0 0.17 0.21 0.38
Steel 6050-G550-0.75
33 - 34 0 0.12 0.21 0.33
Width [m] 4.0 Reactions 34 - 35 0 0.07 0.17 0.23
Height [m] 0.3 35 - 36 0 0 0.11 0.11
Loaded Width 406 Reaction @ Node 19 Reaction @ Node 35 Webs
Purlin Spacing 250 Max. Ult 2,979 Max. Ult 3,093 19 - 1 0.04 0.02 0 0.05
Batten Spacing 600 Min. Ult 548 Min. Ult 569 36 - 18 0.04 0.03 0 0.04
BC Span [m] 4.0 20 - 2 0.21 0 0.02 0.23
Steel [m] 13.6 3 - 21 0 0.16 0.02 0.17
Weight [kg] 14.2 22 - 4 0.17 0 0.02 0.18
Max. Deflection Up 0.230 5 - 23 0 0.11 0.01 0.13
Max. Deflection Down -4.038 24 - 6 0.13 0.01 0.01 0.14
Max CR - Top Chord 0.88 7 - 25 0.03 0.09 0.01 0.1
Max CR - Bottom Chord 0.46 26 - 8 0.1 0.04 0.01 0.1
Status Pass 9 - 27 0.07 0.06 0.01 0.07
28 - 10 0.06 0.07 0.01 0.07
Nodes / Deflections 11 - 29 0.1 0.03 0.01 0.11
BC Deflections Summary 30 - 12 0.03 0.09 0.01 0.1
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (579, -251) -0.8 -1.9 0.0 0.0 13 - 31 0.13 0.01 0.01 0.15
Maximum Limit Ratio 32 - 14 0 0.12 0.01 0.13
2 (257, -34) -0.3 -0.8 0.0 0.0 23 (980, -251) -1.2 -2.9 0.0 0.0
Dead Load -1.64 12.00 0.14 15 - 33 0.17 0 0.02 0.18
3 (338, -34) -0.5 -1.2 0.0 0.0 24 (1061, -251) -1.3 -3.1 0.0 0.0
Live Load -4.04 15.39 0.26 34 - 16 0 0.13 0.02 0.15
4 (739, -34) -0.9 -2.3 0.0 0.0 25 (1463, -251) -1.5 -3.7 0.0 0.0
Dead Load 0.00 0.00 0.00 17 - 35 0.19 0 0.02 0.21
5 (820, -34) -1.0 -2.5 0.0 0.0 26 (1544, -251) -1.6 -3.8 0.0 0.0
6 (1221, -34) -1.4 -3.4 0.0 0.0 27 (1945, -251) -1.6 -4.0 0.0 0.0
7 (1303, -34) -1.4 -3.5 0.0 0.0 28 (2026, -251) -1.6 -4.0 0.0 0.0
8 (1704, -34) -1.6 -4.0 0.0 0.0 29 (2427, -251) -1.5 -3.7 0.0 0.0
9 (1785, -34) -1.6 -4.0 0.0 0.0 30 (2509, -251) -1.5 -3.6 0.0 0.0
10 (2186, -34) -1.6 -4.0 0.0 0.0 31 (2910, -251) -1.2 -2.9 0.0 0.0
11 (2267, -34) -1.6 -3.9 0.0 0.0 32 (2991, -251) -1.1 -2.7 0.0 0.0
12 (2669, -34) -1.4 -3.4 0.0 0.0 33 (3392, -251) -0.6 -1.6 0.0 0.0
13 (2750, -34) -1.3 -3.2 0.0 0.0 34 (3473, -251) -0.5 -1.3 0.0 0.0
14 (3151, -34) -0.9 -2.3 0.0 0.0 35 (3873, -251) 0.0 0.0 0.0 0.0
15 (3232, -34) -0.8 -2.0 0.0 0.0 36 (3945, -251) 0.1 0.2 0.0 0.0
16 (3633, -34) -0.3 -0.8 0.0 0.0
17 (3715, -34) -0.2 -0.5 0.0 0.0
18 (3945, -34) 0.1 0.2 0.0 0.0
19 (26, -251) 0.0 0.0 0.0 0.0
20 (99, -251) -0.1 -0.3 0.0 0.0
21 (498, -251) -0.7 -1.6 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F226

Environment Truss F226 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.31 0.31
Wind Code AS/NZS 1170.2 2-3 0.12 0 0.31 0.41
Code AU 3-4 0.22 0 0.42 0.57
Building Function A 4-5 0.31 0 0.27 0.54
Importance Level 2 5-6 0.36 0 0.42 0.71
6-7 0.42 0 0.2 0.58
Annual prob. of exceed. - Wind 1:500
7-8 0.42 0 0.45 0.81
Annual prob. of exceed. - Snow 1:150
8-9 0.46 0 0.16 0.6
Roof Type Hip
3,659 mm 9 - 10 0.43 0 0.45 0.81
Building Length [m] 19.8
10 - 11 0.43 0 0.2 0.58
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 11 - 12 0.37 0 0.44 0.74
Avg. Roof Height [m] 6.3 12 - 13 0.32 0 0.25 0.53
Enclosed? Enclosed 13 - 14 0.24 0 0.4 0.56
14 - 15 0.17 0 0.27 0.39
For complete job environment details, refer to the job
15 - 16 0 0 0.29 0.29
Enviroments Report.
Bottom Chord
17 - 18 0 0 0.37 0.45
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 18 - 19 0 0.07 0.37 0.44
19 - 20 0 0.13 0.22 0.34
Load Value 20 - 21 0 0.18 0.2 0.35
Loaded Width (Actual) 406 21 - 22 0 0.21 0.16 0.37
Floor Dead Load (KPa) 0.63 22 - 23 0 0.25 0.21 0.4
Floor Live Load (KPa) 1.92
Heel 283 mm BC 3,659 mm Heel 283 mm 23 - 24 0 0.25 0.13 0.37
Floor Point Load (KPa) 1.80 24 - 25 0 0.27 0.21 0.4
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.25 0.13 0.37
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.25 0.21 0.4
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.21 0.15 0.37
28 - 29 0 0.19 0.22 0.41
29 - 30 0 0.14 0.22 0.36
Truss Summary 30 - 31 0 0.1 0.21 0.24
31 - 32 0 0 0.12 0.12
Item Value
Webs
Steel 6050-G550-0.75
17 - 1 0.04 0.02 0 0.05
Width [m] 3.7 Reactions 32 - 16 0.04 0.01 0 0.05
Height [m] 0.3 18 - 2 0.21 0 0.02 0.22
Loaded Width 406 Reaction @ Node 17 Reaction @ Node 31 3 - 19 0 0.15 0.02 0.16
Purlin Spacing 250 Max. Ult 2,737 Max. Ult 2,852 20 - 4 0.16 0 0.02 0.17
Batten Spacing 600 Min. Ult 503 Min. Ult 525 5 - 21 0.01 0.11 0.01 0.12
BC Span [m] 3.7 22 - 6 0.12 0.02 0.01 0.13
Steel [m] 12.4 7 - 23 0.04 0.08 0.01 0.09
Weight [kg] 13.0 24 - 8 0.08 0.05 0.01 0.09
Max. Deflection Up 0.162 9 - 25 0.08 0.05 0.01 0.08
Max. Deflection Down -2.904 26 - 10 0.05 0.07 0.01 0.08
Max CR - Top Chord 0.81 11 - 27 0.11 0.02 0.01 0.12
Max CR - Bottom Chord 0.45 28 - 12 0.01 0.11 0.01 0.12
Status Pass 13 - 29 0.15 0 0.01 0.16
30 - 14 0 0.12 0.01 0.13
Nodes / Deflections 15 - 31 0.21 0 0.02 0.22
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1072, -251) -1.0 -2.4 0.0 0.0
2 (259, -34) -0.3 -0.7 0.0 0.0 23 (1479, -251) -1.2 -2.8 0.0 0.0
Dead Load -1.18 11.78 0.10
3 (341, -34) -0.4 -0.9 0.0 0.0 24 (1560, -251) -1.2 -2.9 0.0 0.0
Live Load -2.90 14.14 0.21
4 (747, -34) -0.7 -1.8 0.0 0.0 25 (1966, -251) -1.2 -2.9 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (828, -34) -0.8 -2.0 0.0 0.0 26 (2048, -251) -1.2 -2.9 0.0 0.0
6 (1235, -34) -1.1 -2.6 0.0 0.0 27 (2454, -251) -1.0 -2.5 0.0 0.0
7 (1316, -34) -1.1 -2.7 0.0 0.0 28 (2535, -251) -0.9 -2.3 0.0 0.0
8 (1723, -34) -1.2 -2.9 0.0 0.0 29 (2942, -251) -0.6 -1.6 0.0 0.0
9 (1804, -34) -1.2 -2.9 0.0 0.0 30 (3024, -251) -0.5 -1.3 0.0 0.0
10 (2210, -34) -1.1 -2.7 0.0 0.0 31 (3561, -251) 0.0 0.0 0.0 0.0
11 (2292, -34) -1.1 -2.7 0.0 0.0 32 (3633, -251) 0.1 0.2 0.0 0.0
12 (2698, -34) -0.8 -2.1 0.0 0.0
13 (2779, -34) -0.8 -1.9 0.0 0.0
14 (3194, -34) -0.4 -1.0 0.0 0.0
15 (3268, -34) -0.3 -0.7 0.0 0.0
16 (3633, -34) 0.1 0.2 0.0 0.0
17 (26, -251) 0.0 0.0 0.0 0.0
18 (99, -251) -0.1 -0.3 0.0 0.0
19 (503, -251) -0.5 -1.3 0.0 0.0
20 (584, -251) -0.6 -1.5 0.0 0.0
21 (991, -251) -0.9 -2.3 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F227

Environment Truss F227 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.32 0.32
Wind Code AS/NZS 1170.2 2-3 0.13 0 0.32 0.42
Code AU 3-4 0.23 0 0.43 0.58
Building Function A 4-5 0.33 0 0.28 0.57
Importance Level 2 5-6 0.39 0 0.43 0.75
6-7 0.46 0 0.21 0.63
Annual prob. of exceed. - Wind 1:500
7-8 0.47 0 0.46 0.87
Annual prob. of exceed. - Snow 1:150
8-9 0.53 0 0.17 0.67
Roof Type Hip
9 - 10 0.5 0 0.47 0.91
Building Length [m] 19.8 4,065 mm
10 - 11 0.52 0 0.17 0.66
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 11 - 12 0.46 0 0.46 0.86
Avg. Roof Height [m] 6.3 12 - 13 0.45 0 0.22 0.62
Enclosed? Enclosed 13 - 14 0.37 0 0.44 0.73
14 - 15 0.31 0 0.28 0.54
For complete job environment details, refer to the job
15 - 16 0.2 0 0.39 0.52
Enviroments Report.
16 - 17 0.12 0 0.35 0.44
17 - 18 0 0 0.35 0.35
Load Summary 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Bottom Chord
19 - 20 0 0 0.38 0.46
Load Value 20 - 21 0 0.07 0.38 0.46
Loaded Width (Actual) 406 21 - 22 0 0.14 0.23 0.36
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,065 mm Heel 283 mm 22 - 23 0 0.19 0.2 0.37
Floor Live Load (KPa) 1.92 23 - 24 0 0.23 0.17 0.4
Floor Point Load (KPa) 1.80 24 - 25 0 0.27 0.22 0.44
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.27 0.15 0.42
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.3 0.22 0.45
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.29 0.12 0.41
28 - 29 0 0.3 0.22 0.46
29 - 30 0 0.27 0.15 0.42
Truss Summary 30 - 31 0 0.26 0.21 0.43
31 - 32 0 0.21 0.17 0.39
Item Value
32 - 33 0 0.18 0.21 0.39
Steel 6050-G550-0.75
33 - 34 0 0.12 0.21 0.33
Width [m] 4.1 Reactions 34 - 35 0 0.07 0.17 0.23
Height [m] 0.3 35 - 36 0 0 0.11 0.11
Loaded Width 406 Reaction @ Node 19 Reaction @ Node 35 Webs
Purlin Spacing 250 Max. Ult 3,052 Max. Ult 3,166 19 - 1 0.04 0.02 0 0.05
Batten Spacing 600 Min. Ult 561 Min. Ult 582 36 - 18 0.04 0.02 0 0.04
BC Span [m] 4.1 20 - 2 0.21 0 0.02 0.23
Steel [m] 13.8 3 - 21 0 0.16 0.02 0.17
Weight [kg] 14.4 22 - 4 0.17 0 0.02 0.18
Max. Deflection Up 0.246 5 - 23 0 0.11 0.01 0.13
Max. Deflection Down -4.416 24 - 6 0.13 0.01 0.01 0.14
Max CR - Top Chord 0.91 7 - 25 0.03 0.09 0.01 0.1
Max CR - Bottom Chord 0.46 26 - 8 0.1 0.04 0.01 0.1
Status Pass 9 - 27 0.07 0.06 0.01 0.07
28 - 10 0.06 0.07 0.01 0.07
Nodes / Deflections 11 - 29 0.1 0.03 0.01 0.11
BC Deflections Summary 30 - 12 0.03 0.09 0.01 0.1
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (591, -251) -0.8 -2.1 0.0 0.0 13 - 31 0.14 0.01 0.01 0.15
Maximum Limit Ratio 32 - 14 0 0.12 0.01 0.13
2 (263, -34) -0.4 -0.9 0.0 0.0 23 (1004, -251) -1.3 -3.2 0.0 0.0
Dead Load -1.79 12.00 0.15 15 - 33 0.17 0 0.02 0.18
3 (344, -34) -0.5 -1.3 0.0 0.0 24 (1085, -251) -1.4 -3.4 0.0 0.0
Live Load -4.42 15.76 0.28 34 - 16 0 0.13 0.02 0.15
4 (757, -34) -1.0 -2.5 0.0 0.0 25 (1498, -251) -1.7 -4.1 0.0 0.0
Dead Load 0.00 0.00 0.00 17 - 35 0.19 0 0.02 0.21
5 (838, -34) -1.1 -2.8 0.0 0.0 26 (1579, -251) -1.7 -4.2 0.0 0.0
6 (1251, -34) -1.5 -3.7 0.0 0.0 27 (1992, -251) -1.8 -4.4 0.0 0.0
7 (1332, -34) -1.6 -3.9 0.0 0.0 28 (2073, -251) -1.8 -4.4 0.0 0.0
8 (1745, -34) -1.8 -4.3 0.0 0.0 29 (2486, -251) -1.7 -4.1 0.0 0.0
9 (1826, -34) -1.8 -4.4 0.0 0.0 30 (2567, -251) -1.6 -4.0 0.0 0.0
10 (2239, -34) -1.8 -4.3 0.0 0.0 31 (2980, -251) -1.3 -3.2 0.0 0.0
11 (2320, -34) -1.7 -4.3 0.0 0.0 32 (3061, -251) -1.2 -2.9 0.0 0.0
12 (2733, -34) -1.5 -3.7 0.0 0.0 33 (3474, -251) -0.7 -1.7 0.0 0.0
13 (2814, -34) -1.4 -3.5 0.0 0.0 34 (3556, -251) -0.6 -1.4 0.0 0.0
14 (3227, -34) -1.0 -2.5 0.0 0.0 35 (3967, -251) 0.0 0.0 0.0 0.0
15 (3309, -34) -0.9 -2.2 0.0 0.0 36 (4039, -251) 0.1 0.2 0.0 0.0
16 (3721, -34) -0.4 -0.9 0.0 0.0
17 (3803, -34) -0.2 -0.6 0.0 0.0
18 (4039, -34) 0.1 0.2 0.0 0.0
19 (26, -251) 0.0 0.0 0.0 0.0
20 (99, -251) -0.1 -0.4 0.0 0.0
21 (510, -251) -0.7 -1.8 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F228

Environment Truss F228 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.32 0.32
Wind Code AS/NZS 1170.2 2-3 0.12 0 0.32 0.41
Code AU 3-4 0.23 0 0.41 0.56
Building Function A 4-5 0.33 0 0.29 0.57
Importance Level 2 5-6 0.39 0 0.41 0.73
6-7 0.46 0 0.22 0.63
Annual prob. of exceed. - Wind 1:500
7-8 0.48 0 0.44 0.86
Annual prob. of exceed. - Snow 1:150
8-9 0.54 0 0.2 0.69
Roof Type Hip
9 - 10 0.53 0 0.45 0.93
Building Length [m] 19.8 4,265 mm 10 - 11 0.56 0 0.18 0.72
Building Width [m] 25.1
11 - 12 0.53 0 0.45 0.92
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.53 0 0.2 0.68
Enclosed? Enclosed 13 - 14 0.47 0 0.44 0.85
14 - 15 0.44 0 0.22 0.63
For complete job environment details, refer to the job
15 - 16 0.36 0 0.42 0.71
Enviroments Report.
16 - 17 0.3 0 0.28 0.53
17 - 18 0.2 0 0.37 0.49
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.11 0 0.35 0.43
19 - 20 0 0 0.35 0.35
Load Value Bottom Chord
Loaded Width (Actual) 406 21 - 22 0 0 0.4 0.48
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,265 mm Heel 283 mm 22 - 23 0 0.07 0.4 0.47
Floor Live Load (KPa) 1.92 23 - 24 0 0.13 0.24 0.37
Floor Point Load (KPa) 1.80 24 - 25 0 0.19 0.19 0.38
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.22 0.19 0.41
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.27 0.21 0.45
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.28 0.17 0.45
28 - 29 0 0.31 0.21 0.48
29 - 30 0 0.31 0.14 0.45
Truss Summary 30 - 31 0 0.33 0.22 0.47
31 - 32 0 0.31 0.15 0.45
Item Value
32 - 33 0 0.31 0.21 0.48
Steel 6050-G550-0.75
33 - 34 0 0.27 0.17 0.45
Width [m] 4.3 Reactions 34 - 35 0 0.26 0.2 0.44
Height [m] 0.3 35 - 36 0 0.21 0.19 0.4
Loaded Width 406 Reaction @ Node 21 Reaction @ Node 39 36 - 37 0 0.17 0.22 0.39
Purlin Spacing 250 Max. Ult 3,206 Max. Ult 3,321 37 - 38 0 0.11 0.22 0.34
Batten Spacing 600 Min. Ult 590 Min. Ult 611 38 - 39 0 0.06 0.18 0.24
BC Span [m] 4.3 39 - 40 0 0 0.11 0.11
Steel [m] 14.7 Webs
Weight [kg] 15.3 21 - 1 0.04 0.02 0 0.05
Max. Deflection Up 0.287 40 - 20 0.04 0.03 0 0.04
Max. Deflection Down -5.308 22 - 2 0.22 0 0.02 0.23
Max CR - Top Chord 0.93 3 - 23 0 0.16 0.02 0.18
Max CR - Bottom Chord 0.48 24 - 4 0.18 0 0.02 0.19
Status Pass 5 - 25 0 0.12 0.01 0.14
26 - 6 0.14 0.01 0.01 0.15
Nodes / Deflections 7 - 27 0.02 0.1 0.01 0.11
BC Deflections Summary 28 - 8 0.11 0.03 0.01 0.12
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) -0.2 -0.4 0.0 0.0 9 - 29 0.05 0.08 0.01 0.08
Maximum Limit Ratio 30 - 10 0.08 0.05 0.01 0.08
2 (246, -34) -0.4 -1.0 0.0 0.0 23 (477, -251) -0.8 -1.9 0.0 0.0
Dead Load -2.16 12.00 0.18 11 - 31 0.08 0.05 0.01 0.09
3 (328, -34) -0.6 -1.4 0.0 0.0 24 (558, -251) -0.9 -2.2 0.0 0.0
Live Load -5.31 16.56 0.32 32 - 12 0.05 0.08 0.01 0.09
4 (708, -34) -1.1 -2.8 0.0 0.0 25 (938, -251) -1.4 -3.5 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0.11 0.03 0.01 0.12
5 (789, -34) -1.2 -3.1 0.0 0.0 26 (1019, -251) -1.5 -3.8 0.0 0.0
6 (1169, -34) -1.7 -4.1 0.0 0.0 27 (1400, -251) -1.9 -4.7 0.0 0.0 34 - 14 0.02 0.1 0.01 0.11
7 (1250, -34) -1.8 -4.4 0.0 0.0 28 (1481, -251) -2.0 -4.8 0.0 0.0 15 - 35 0.15 0 0.01 0.16
8 (1630, -34) -2.0 -5.0 0.0 0.0 29 (1861, -251) -2.1 -5.3 0.0 0.0 36 - 16 0 0.13 0.02 0.14
9 (1712, -34) -2.1 -5.1 0.0 0.0 30 (1942, -251) -2.2 -5.3 0.0 0.0 17 - 37 0.18 0 0.02 0.19
10 (2092, -34) -2.2 -5.3 0.0 0.0 31 (2322, -251) -2.1 -5.3 0.0 0.0 38 - 18 0 0.14 0.02 0.15
11 (2173, -34) -2.2 -5.3 0.0 0.0 32 (2404, -251) -2.1 -5.2 0.0 0.0 19 - 39 0.19 0 0.02 0.21
12 (2553, -34) -2.0 -5.0 0.0 0.0 33 (2784, -251) -1.9 -4.6 0.0 0.0
13 (2635, -34) -2.0 -4.9 0.0 0.0 34 (2865, -251) -1.8 -4.5 0.0 0.0
14 (3015, -34) -1.7 -4.1 0.0 0.0 35 (3245, -251) -1.4 -3.5 0.0 0.0
15 (3096, -34) -1.6 -3.9 0.0 0.0 36 (3327, -251) -1.3 -3.2 0.0 0.0
16 (3476, -34) -1.1 -2.7 0.0 0.0 37 (3707, -251) -0.8 -1.9 0.0 0.0
17 (3557, -34) -1.0 -2.4 0.0 0.0 38 (3788, -251) -0.6 -1.5 0.0 0.0
18 (3937, -34) -0.4 -0.9 0.0 0.0 39 (4166, -251) 0.0 0.0 0.0 0.0
19 (4019, -34) -0.2 -0.6 0.0 0.0 40 (4239, -251) 0.1 0.3 0.0 0.0
20 (4239, -34) 0.1 0.3 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F229
Identical Trusses
Environment Truss F229
F229 F230
Site Data
Elevation ASL [m] 10 2 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.34 0.34
Annual prob. of exceed. - Snow 1:150 2-3 0.11 0 0.34 0.42
Roof Type Hip 3-4 0.19 0 0.37 0.49
Building Length [m] 19.8 4,265 mm 4-5 0.29 0 0.28 0.53
Building Width [m] 25.1 5-6 0.36 0 0.42 0.7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 6-7 0.44 0 0.22 0.62
Avg. Roof Height [m] 6.3
7-8 0.47 0 0.44 0.84
Enclosed? Enclosed
8-9 0.52 0 0.2 0.67
For complete job environment details, refer to the job 9 - 10 0.52 0 0.45 0.91
Enviroments Report. 10 - 11 0.55 0 0.18 0.7
11 - 12 0.52 0 0.45 0.91
12 - 13 0.52 0 0.2 0.67
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
13 - 14 0.47 0 0.44 0.84
14 - 15 0.44 0 0.22 0.62
Load Value
15 - 16 0.36 0 0.42 0.7
Loaded Width (Actual) 406
16 - 17 0.29 0 0.28 0.53
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,265 mm Heel 283 mm 17 - 18 0.19 0 0.37 0.49
Floor Live Load (KPa) 1.92 18 - 19 0.11 0 0.34 0.42
Floor Point Load (KPa) 1.80 19 - 20 0 0 0.34 0.34
Ceiling Dead Load (KPa) 0.15 Bottom Chord
Ceiling Live Load (KPa) 0.00 21 - 22 0 0 0.11 0.11
Ceiling Point Load (KPa) 1.10 22 - 23 0 0.06 0.18 0.24
23 - 24 0 0.11 0.22 0.33
24 - 25 0 0.17 0.22 0.39
Truss Summary
25 - 26 0 0.21 0.19 0.4
Item Value 26 - 27 0 0.25 0.2 0.44
Steel 6050-G550-0.75 27 - 28 0 0.27 0.17 0.44
28 - 29 0 0.3 0.21 0.47
Width [m] 4.3 Reactions 29 - 30 0 0.3 0.14 0.44
Height [m] 0.3
30 - 31 0 0.32 0.21 0.46
Loaded Width 406 Reaction @ Node 22 Reaction @ Node 39
31 - 32 0 0.3 0.14 0.44
Purlin Spacing 250 Max. Ult 3,264 Max. Ult 3,264
32 - 33 0 0.3 0.21 0.47
Batten Spacing 600 Min. Ult 600 Min. Ult 600
33 - 34 0 0.27 0.17 0.44
BC Span [m] 4.3 34 - 35 0 0.25 0.2 0.44
Steel [m] 14.7 35 - 36 0 0.21 0.19 0.4
Weight [kg] 15.3 36 - 37 0 0.17 0.22 0.39
Max. Deflection Up 0.270 37 - 38 0 0.11 0.22 0.33
Max. Deflection Down -4.878 38 - 39 0 0.06 0.18 0.24
Max CR - Top Chord 0.91 39 - 40 0 0 0.11 0.11
Max CR - Bottom Chord 0.47 Webs
Status Pass 21 - 1 0.04 0.03 0 0.04
Nodes / Deflections 40 - 20 0.04 0.03 0 0.04
22 - 2 0.19 0 0.02 0.21
BC Deflections Summary 3 - 23 0 0.14 0.02 0.15
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.1 0.3 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 24 - 4 0.18 0 0.02 0.19
Maximum Limit Ratio
2 (246, -34) -0.2 -0.5 0.0 0.0 23 (477, -251) -0.6 -1.4 0.0 0.0 5 - 25 0 0.13 0.02 0.14
Dead Load -1.98 12.00 0.17
3 (328, -34) -0.4 -0.9 0.0 0.0 24 (558, -251) -0.7 -1.8 0.0 0.0 26 - 6 0.14 0 0.01 0.16
Live Load -4.88 16.27 0.30
4 (708, -34) -0.9 -2.3 0.0 0.0 25 (938, -251) -1.2 -3.0 0.0 0.0 7 - 27 0.02 0.1 0.01 0.11
Dead Load 0.00 0.00 0.00
5 (789, -34) -1.0 -2.6 0.0 0.0 26 (1019, -251) -1.3 -3.3 0.0 0.0 28 - 8 0.11 0.03 0.01 0.12
6 (1169, -34) -1.5 -3.7 0.0 0.0 27 (1400, -251) -1.7 -4.2 0.0 0.0 9 - 29 0.05 0.08 0.01 0.09
7 (1250, -34) -1.6 -3.9 0.0 0.0 28 (1481, -251) -1.8 -4.3 0.0 0.0 30 - 10 0.08 0.05 0.01 0.09
8 (1630, -34) -1.9 -4.6 0.0 0.0 29 (1861, -251) -2.0 -4.8 0.0 0.0 11 - 31 0.08 0.05 0.01 0.09
9 (1712, -34) -1.9 -4.7 0.0 0.0 30 (1942, -251) -2.0 -4.9 0.0 0.0 32 - 12 0.05 0.08 0.01 0.09
10 (2092, -34) -2.0 -4.9 0.0 0.0 31 (2322, -251) -2.0 -4.9 0.0 0.0 13 - 33 0.11 0.03 0.01 0.12
11 (2173, -34) -2.0 -4.9 0.0 0.0 32 (2404, -251) -2.0 -4.8 0.0 0.0 34 - 14 0.02 0.1 0.01 0.11
12 (2553, -34) -1.9 -4.7 0.0 0.0 33 (2784, -251) -1.8 -4.3 0.0 0.0 15 - 35 0.14 0 0.01 0.16
13 (2635, -34) -1.9 -4.6 0.0 0.0 34 (2865, -251) -1.7 -4.2 0.0 0.0 36 - 16 0 0.13 0.02 0.14
14 (3015, -34) -1.6 -3.9 0.0 0.0 35 (3245, -251) -1.3 -3.3 0.0 0.0 17 - 37 0.18 0 0.02 0.19
15 (3096, -34) -1.5 -3.7 0.0 0.0 36 (3327, -251) -1.2 -3.0 0.0 0.0 38 - 18 0 0.14 0.02 0.15
16 (3476, -34) -1.0 -2.6 0.0 0.0 37 (3707, -251) -0.7 -1.8 0.0 0.0 19 - 39 0.19 0 0.02 0.21
17 (3557, -34) -0.9 -2.3 0.0 0.0 38 (3788, -251) -0.6 -1.4 0.0 0.0
18 (3937, -34) -0.4 -0.9 0.0 0.0 39 (4166, -251) 0.0 0.0 0.0 0.0
19 (4019, -34) -0.2 -0.5 0.0 0.0 40 (4239, -251) 0.1 0.3 0.0 0.0
20 (4239, -34) 0.1 0.3 0.0 0.0
21 (26, -251) 0.1 0.3 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F231
Identical Trusses
Environment Truss F231
F231 F232 F233 F234
Site Data F235 F236 F237 F238
Elevation ASL [m] 10
Building Data 8 Identical Trusses
Wind Code AS/NZS 1170.2
Code AU Forces
Building Function A
Importance Level 2 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Wind 1:500 Top Chord
Annual prob. of exceed. - Snow 1:150 1-2 0 0 0.28 0.28
Roof Type Hip 2-3 0.08 0 0.28 0.34
Building Length [m] 19.8 4,265 mm 3-4 0.13 0 0.35 0.43
Building Width [m] 25.1 4-5 0.18 0 0.2 0.34
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 5-6 0.18 0 0.37 0.51
6-7 0.21 0 0.19 0.34
Enclosed? Enclosed
7-8 0.16 0.01 0.37 0.49
For complete job environment details, refer to the job 8-9 0.14 0.02 0.26 0.35
Enviroments Report. 9 - 10 0.06 0.03 0.34 0.38
10 - 11 0.03 0.04 0.28 0.29
11 - 12 0 0.06 0.28 0.32
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
12 - 13 0.05 0.05 0.26 0.29
13 - 14 0.09 0.04 0.37 0.43
Load Value
14 - 15 0.15 0.02 0.23 0.33
Loaded Width (Actual) 406
15 - 16 0.15 0.02 0.37 0.48
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,265 mm Heel 283 mm 16 - 17 0.17 0.01 0.19 0.31
Floor Live Load (KPa) 1.92 17 - 18 0.12 0 0.36 0.43
Floor Point Load (KPa) 1.80 18 - 19 0.08 0 0.27 0.33
Ceiling Dead Load (KPa) 0.15 19 - 20 0 0 0.27 0.27
Ceiling Live Load (KPa) 0.00 Bottom Chord
Ceiling Point Load (KPa) 1.10 21 - 22 0 0 0.12 0.12
22 - 23 0 0.05 0.15 0.17
Truss Summary 23 - 24 0 0.07 0.14 0.21
24 - 25 0 0.11 0.18 0.25
Item Value 25 - 26 0 0.11 0.09 0.18
Steel 6050-G550-0.75 26 - 27 0.01 0.12 0.18 0.24
27 - 28 0.02 0.09 0.14 0.21
Width [m] 4.3 Reactions 28 - 29 0.03 0.08 0.19 0.27
Height [m] 0.3
29 - 30 0.05 0.04 0.19 0.23
Loaded Width 406 Reaction @ Node 22 Reaction @ Node 31 Reaction @ Node 39
30 - 31 0.06 0.02 0.2 0.24
Purlin Spacing 250 Max. Ult 1,494 Max. Ult 3,845 Max. Ult 1,188
31 - 32 0.1 0 0.2 0.24
Batten Spacing 600 Min. Ult 275 Min. Ult 707 Min. Ult 219
32 - 33 0.09 0.03 0.17 0.21
BC Span [m] 4.3
33 - 34 0.06 0.05 0.15 0.19
Steel [m] 14.7 34 - 35 0.04 0.09 0.18 0.23
Weight [kg] 15.3 35 - 36 0.03 0.09 0.09 0.16
Max. Deflection Up 0.035 36 - 37 0.02 0.1 0.18 0.23
Max. Deflection Down -0.345 37 - 38 0.01 0.07 0.12 0.19
Max CR - Top Chord 0.51 38 - 39 0 0.04 0.16 0.18
Max CR - Bottom Chord 0.27 39 - 40 0 0 0.12 0.12
Status Pass Webs
Nodes / Deflections 21 - 1 0.04 0.02 0 0.05
40 - 20 0.04 0.02 0 0.05
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 22 - 2 0.15 0 0.01 0.16
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 3 - 23 0.01 0.09 0.01 0.09
2 (240, -34) 0.0 -0.1 0.0 0.0 23 (465, -251) -0.1 -0.2 0.0 0.0 24 - 4 0.1 0 0.01 0.11
Dead Load -0.14 7.32 0.02
3 (322, -34) -0.1 -0.1 0.0 0.0 24 (547, -251) -0.1 -0.2 0.0 0.0 5 - 25 0.03 0.06 0.01 0.06
Live Load -0.34 8.78 0.04
4 (690, -34) -0.1 -0.3 0.0 0.0 25 (915, -251) -0.1 -0.3 0.0 0.0 26 - 6 0.05 0.04 0.01 0.06
Dead Load 0.00 0.00 0.00
5 (772, -34) -0.1 -0.3 0.0 0.0 26 (997, -251) -0.1 -0.3 0.0 0.0 7 - 27 0.09 0.02 0.01 0.1
6 (1140, -34) -0.1 -0.4 0.0 0.0 27 (1365, -251) -0.1 -0.3 0.0 0.0 28 - 8 0 0.09 0.01 0.1
7 (1222, -34) -0.1 -0.3 0.0 0.0 28 (1446, -251) -0.1 -0.3 0.0 0.0 9 - 29 0.14 0 0.01 0.15
8 (1590, -34) -0.1 -0.3 0.0 0.0 29 (1815, -251) -0.1 -0.2 0.0 0.0 30 - 10 0 0.11 0.01 0.12
9 (1672, -34) -0.1 -0.2 0.0 0.0 30 (1897, -251) -0.1 -0.1 0.0 0.0 11 - 31 0.15 0 0.01 0.16
10 (2042, -34) 0.0 -0.1 0.0 0.0 31 (2294, -251) 0.0 0.0 0.0 0.0 32 - 12 0.15 0 0.01 0.16
11 (2122, -34) 0.0 0.0 0.0 0.0 32 (2377, -251) 0.0 0.0 0.0 0.0 13 - 33 0 0.1 0.01 0.11
12 (2555, -34) 0.0 -0.1 0.0 0.0 33 (2786, -251) 0.0 -0.1 0.0 0.0 34 - 14 0.11 0 0.01 0.12
13 (2635, -34) 0.0 -0.1 0.0 0.0 34 (2867, -251) -0.1 -0.2 0.0 0.0 15 - 35 0.03 0.06 0.01 0.06
14 (3016, -34) -0.1 -0.2 0.0 0.0 35 (3247, -251) -0.1 -0.2 0.0 0.0 36 - 16 0.05 0.04 0 0.05
15 (3098, -34) -0.1 -0.2 0.0 0.0 36 (3328, -251) -0.1 -0.2 0.0 0.0 17 - 37 0.09 0.01 0.01 0.09
16 (3477, -34) -0.1 -0.2 0.0 0.0 37 (3707, -251) -0.1 -0.1 0.0 0.0 38 - 18 0.02 0.08 0.01 0.08
17 (3558, -34) -0.1 -0.2 0.0 0.0 38 (3789, -251) 0.0 -0.1 0.0 0.0 19 - 39 0.14 0 0.01 0.15
18 (3938, -34) 0.0 -0.1 0.0 0.0 39 (4166, -251) 0.0 0.0 0.0 0.0
19 (4019, -34) 0.0 0.0 0.0 0.0 40 (4239, -251) 0.0 0.0 0.0 0.0
20 (4239, -34) 0.0 0.0 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F239

Environment Truss F239 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.28 0.28
Wind Code AS/NZS 1170.2 2-3 0.08 0 0.28 0.34
Code AU 3-4 0.13 0 0.35 0.43
Building Function A 4-5 0.18 0 0.2 0.34
Importance Level 2 5-6 0.18 0 0.37 0.51
6-7 0.21 0 0.19 0.34
Annual prob. of exceed. - Wind 1:500
7-8 0.16 0.01 0.37 0.49
Annual prob. of exceed. - Snow 1:150
8-9 0.14 0.02 0.26 0.35
Roof Type Hip
9 - 10 0.06 0.03 0.34 0.38
Building Length [m] 19.8 4,265 mm 10 - 11 0.03 0.04 0.28 0.29
Building Width [m] 25.1
11 - 12 0 0.06 0.28 0.32
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.05 0.05 0.26 0.29
Enclosed? Enclosed 13 - 14 0.09 0.04 0.37 0.43
14 - 15 0.15 0.02 0.23 0.33
For complete job environment details, refer to the job
15 - 16 0.15 0.02 0.37 0.48
Enviroments Report.
16 - 17 0.17 0.01 0.19 0.31
17 - 18 0.12 0 0.36 0.43
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.08 0 0.27 0.33
19 - 20 0 0 0.27 0.27
Load Value Bottom Chord
Loaded Width (Actual) 400 21 - 22 0 0 0.12 0.12
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,265 mm Heel 283 mm 22 - 23 0 0.05 0.15 0.17
Floor Live Load (KPa) 1.92 23 - 24 0 0.07 0.14 0.21
Floor Point Load (KPa) 1.80 24 - 25 0 0.11 0.18 0.25
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.11 0.09 0.18
Ceiling Live Load (KPa) 0.00 26 - 27 0.01 0.12 0.18 0.24
Ceiling Point Load (KPa) 1.10 27 - 28 0.02 0.09 0.14 0.21
28 - 29 0.03 0.08 0.19 0.27
29 - 30 0.05 0.04 0.19 0.23
Truss Summary 30 - 31 0.06 0.02 0.2 0.24
31 - 32 0.1 0 0.2 0.24
Item Value
32 - 33 0.09 0.03 0.17 0.21
Steel 6050-G550-0.75
33 - 34 0.06 0.05 0.15 0.19
Width [m] 4.3 Reactions 34 - 35 0.04 0.09 0.18 0.23
Height [m] 0.3 35 - 36 0.03 0.09 0.09 0.16
Loaded Width 400 Reaction @ Node 22 Reaction @ Node 31 Reaction @ Node 39 36 - 37 0.02 0.1 0.18 0.23
Purlin Spacing 250 Max. Ult 1,472 Max. Ult 3,788 Max. Ult 1,170 37 - 38 0.01 0.07 0.12 0.19
Batten Spacing 600 Min. Ult 271 Min. Ult 697 Min. Ult 215 38 - 39 0 0.04 0.16 0.18
BC Span [m] 4.3 39 - 40 0 0 0.12 0.12
Steel [m] 14.7 Webs
Weight [kg] 15.3 21 - 1 0.04 0.02 0 0.05
Max. Deflection Up 0.034 40 - 20 0.04 0.02 0 0.05
Max. Deflection Down -0.340 22 - 2 0.15 0 0.01 0.16
Max CR - Top Chord 0.51 3 - 23 0.01 0.09 0.01 0.09
Max CR - Bottom Chord 0.27 24 - 4 0.1 0 0.01 0.11
Status Pass 5 - 25 0.03 0.06 0.01 0.06
26 - 6 0.05 0.04 0.01 0.06
Nodes / Deflections 7 - 27 0.09 0.02 0.01 0.1
BC Deflections Summary 28 - 8 0 0.09 0.01 0.1
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 9 - 29 0.14 0 0.01 0.15
Maximum Limit Ratio 30 - 10 0 0.11 0.01 0.12
2 (240, -34) 0.0 -0.1 0.0 0.0 23 (465, -251) -0.1 -0.2 0.0 0.0
Dead Load -0.14 7.32 0.02 11 - 31 0.15 0 0.01 0.16
3 (322, -34) -0.1 -0.1 0.0 0.0 24 (547, -251) -0.1 -0.2 0.0 0.0
Live Load -0.34 8.78 0.04 32 - 12 0.15 0 0.01 0.16
4 (690, -34) -0.1 -0.3 0.0 0.0 25 (915, -251) -0.1 -0.3 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0 0.1 0.01 0.11
5 (772, -34) -0.1 -0.3 0.0 0.0 26 (997, -251) -0.1 -0.3 0.0 0.0
6 (1140, -34) -0.1 -0.3 0.0 0.0 27 (1365, -251) -0.1 -0.3 0.0 0.0 34 - 14 0.11 0 0.01 0.12
7 (1222, -34) -0.1 -0.3 0.0 0.0 28 (1446, -251) -0.1 -0.3 0.0 0.0 15 - 35 0.03 0.06 0.01 0.06
8 (1590, -34) -0.1 -0.3 0.0 0.0 29 (1815, -251) -0.1 -0.2 0.0 0.0 36 - 16 0.05 0.04 0 0.05
9 (1672, -34) -0.1 -0.2 0.0 0.0 30 (1897, -251) -0.1 -0.1 0.0 0.0 17 - 37 0.09 0.01 0.01 0.09
10 (2042, -34) 0.0 -0.1 0.0 0.0 31 (2294, -251) 0.0 0.0 0.0 0.0 38 - 18 0.02 0.08 0.01 0.08
11 (2122, -34) 0.0 0.0 0.0 0.0 32 (2377, -251) 0.0 0.0 0.0 0.0 19 - 39 0.14 0 0.01 0.15
12 (2555, -34) 0.0 -0.1 0.0 0.0 33 (2786, -251) 0.0 -0.1 0.0 0.0
13 (2635, -34) 0.0 -0.1 0.0 0.0 34 (2867, -251) -0.1 -0.2 0.0 0.0
14 (3016, -34) -0.1 -0.2 0.0 0.0 35 (3247, -251) -0.1 -0.2 0.0 0.0
15 (3098, -34) -0.1 -0.2 0.0 0.0 36 (3328, -251) -0.1 -0.2 0.0 0.0
16 (3477, -34) -0.1 -0.2 0.0 0.0 37 (3707, -251) -0.1 -0.1 0.0 0.0
17 (3558, -34) -0.1 -0.2 0.0 0.0 38 (3789, -251) 0.0 -0.1 0.0 0.0
18 (3938, -34) 0.0 -0.1 0.0 0.0 39 (4166, -251) 0.0 0.0 0.0 0.0
19 (4019, -34) 0.0 0.0 0.0 0.0 40 (4239, -251) 0.0 0.0 0.0 0.0
20 (4239, -34) 0.0 0.0 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F240

Environment Truss F240 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.21 0.21
Wind Code AS/NZS 1170.2 2-3 0.03 0 0.11 0.13
Code AU 3-4 0.01 0.02 0.26 0.28
Building Function A 4-5 0.03 0 0.15 0.15
Importance Level 2 5-6 0.01 0.02 0.26 0.28
6-7 0.03 0 0.14 0.15
Annual prob. of exceed. - Wind 1:500
7-8 0.01 0.02 0.26 0.28
Annual prob. of exceed. - Snow 1:150
8-9 0.03 0 0.14 0.15
Roof Type Hip
9 - 10 0.01 0.02 0.26 0.28
Building Length [m] 19.8 4,265 mm 10 - 11 0.03 0 0.14 0.15
Building Width [m] 25.1
11 - 12 0.01 0.02 0.26 0.28
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
12 - 13 0.03 0 0.14 0.15
Enclosed? Enclosed 13 - 14 0.01 0.02 0.26 0.28
14 - 15 0.03 0 0.14 0.15
For complete job environment details, refer to the job
15 - 16 0.01 0.02 0.26 0.28
Enviroments Report.
16 - 17 0.03 0.01 0.14 0.15
17 - 18 0.01 0.02 0.26 0.28
Load Summary 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 - 19 0.02 0.01 0.14 0.15
19 - 20 0 0 0.21 0.21
Load Value Bottom Chord
Loaded Width (Actual) 397 21 - 22 0 0 0.1 0.12
Floor Dead Load (KPa) 0.63 Heel 283 mm BC 4,265 mm Heel 283 mm 22 - 23 0.01 0.02 0.23 0.23
Floor Live Load (KPa) 1.92 23 - 24 0.04 0 0.11 0.13
Floor Point Load (KPa) 1.80 24 - 25 0.01 0.02 0.16 0.16
Ceiling Dead Load (KPa) 0.15 25 - 26 0.03 0.01 0.1 0.12
Ceiling Live Load (KPa) 0.00 26 - 27 0.01 0.02 0.15 0.16
Ceiling Point Load (KPa) 1.10 27 - 28 0.03 0.01 0.1 0.12
28 - 29 0.01 0.02 0.15 0.15
29 - 30 0.03 0.01 0.1 0.12
Truss Summary 30 - 31 0.01 0.02 0.15 0.15
31 - 32 0.03 0.01 0.1 0.12
Item Value
32 - 33 0.01 0.02 0.15 0.15
Steel 6050-G550-0.75
33 - 34 0.03 0.01 0.1 0.12
Width [m] 4.3 Reactions 34 - 35 0.01 0.02 0.15 0.15
Height [m] 0.3 35 - 36 0.03 0.01 0.1 0.12
Loaded Width 397 Reaction @ Node 21 Reaction @ Node 24 Reaction @ Node 26 Reaction @ Node 28 Reaction @ Node 30 Reaction @ Node 32 Reaction @ Node 34 Reaction @ Node 36 36 - 37 0.01 0.02 0.15 0.15
Purlin Spacing 250 Max. Ult 306 Max. Ult 895 Max. Ult 656 Max. Ult 702 Max. Ult 694 Max. Ult 699 Max. Ult 696 Max. Ult 698 37 - 38 0.04 0.01 0.1 0.13
Batten Spacing 600 Min. Ult 55 Min. Ult 167 Min. Ult 120 Min. Ult 129 Min. Ult 128 Min. Ult 129 Min. Ult 128 Min. Ult 127 38 - 39 0.01 0.01 0.16 0.17
BC Span [m] 4.3 39 - 40 0 0 0.08 0.09
Steel [m] 14.7 Webs
Weight [kg] 15.3 21 - 1 0.05 0 0 0.06
Reaction @ Node 38 Reaction @ Node 40
Max. Deflection Up 0.100 40 - 20 0.05 0.01 0 0.05
Max. Ult 760 Max. Ult 276 22 - 2 0.05 0.01 0 0.05
Max. Deflection Down -0.009
Min. Ult 143 Min. Ult 49 3 - 23 0.07 0 0.01 0.07
Max CR - Top Chord 0.28
Max CR - Bottom Chord 0.23 24 - 4 0.08 0.01 0.01 0.09
Status Pass 5 - 25 0.06 0.01 0.01 0.07
26 - 6 0.08 0.01 0.01 0.08
Nodes / Deflections 7 - 27 0.06 0.01 0.01 0.07
BC Deflections Summary 28 - 8 0.08 0.01 0.01 0.09
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.0 0.0 0.0 0.0 22 (99, -251) 0.0 0.0 0.0 0.0 9 - 29 0.06 0.01 0.01 0.07
Maximum Limit Ratio 30 - 10 0.08 0.01 0.01 0.09
2 (246, -34) 0.0 0.0 0.0 0.0 23 (477, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 1.77 0.00 11 - 31 0.06 0.01 0.01 0.07
3 (328, -34) 0.0 0.0 0.0 0.0 24 (558, -251) 0.0 0.0 0.0 0.0
Live Load -0.01 2.13 0.00 32 - 12 0.08 0.01 0.01 0.09
4 (708, -34) 0.0 0.0 0.0 0.0 25 (938, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00 13 - 33 0.06 0.01 0.01 0.07
5 (789, -34) 0.0 0.0 0.0 0.0 26 (1019, -251) 0.0 0.0 0.0 0.0
6 (1169, -34) 0.0 0.0 0.0 0.0 27 (1400, -251) 0.0 0.0 0.0 0.0 34 - 14 0.08 0.01 0.01 0.09
7 (1250, -34) 0.0 0.0 0.0 0.0 28 (1481, -251) 0.0 0.0 0.0 0.0 15 - 35 0.06 0.01 0.01 0.07
8 (1630, -34) 0.0 0.0 0.0 0.0 29 (1861, -251) 0.0 0.0 0.0 0.0 36 - 16 0.08 0.01 0.01 0.08
9 (1712, -34) 0.0 0.0 0.0 0.0 30 (1942, -251) 0.0 0.0 0.0 0.0 17 - 37 0.07 0.01 0.01 0.07
10 (2092, -34) 0.0 0.0 0.0 0.0 31 (2322, -251) 0.0 0.0 0.0 0.0 38 - 18 0.08 0.01 0.01 0.08
11 (2173, -34) 0.0 0.0 0.0 0.0 32 (2404, -251) 0.0 0.0 0.0 0.0 19 - 39 0.04 0.02 0 0.05
12 (2553, -34) 0.0 0.0 0.0 0.0 33 (2784, -251) 0.0 0.0 0.0 0.0
13 (2635, -34) 0.0 0.0 0.0 0.0 34 (2865, -251) 0.0 0.0 0.0 0.0
14 (3015, -34) 0.0 0.0 0.0 0.0 35 (3245, -251) 0.0 0.0 0.0 0.0
15 (3096, -34) 0.0 0.0 0.0 0.0 36 (3327, -251) 0.0 0.0 0.0 0.0
16 (3476, -34) 0.0 0.0 0.0 0.0 37 (3707, -251) 0.0 0.0 0.0 0.0
17 (3557, -34) 0.0 0.0 0.0 0.0 38 (3788, -251) 0.0 0.0 0.0 0.0
18 (3937, -34) 0.0 0.0 0.0 0.0 39 (4166, -251) 0.0 0.0 0.0 0.0
19 (4019, -34) 0.0 0.0 0.0 0.0 40 (4239, -251) 0.0 0.0 0.0 0.0
20 (4239, -34) 0.0 0.0 0.0 0.0
21 (26, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F241

Environment Truss F241 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0.04 0 0.11 0.12
Code AU 3-4 0.02 0.02 0.25 0.27
Building Function A 4-5 0.03 0 0.13 0.14
Importance Level 2 5-6 0.01 0.02 0.25 0.27
6-7 0.03 0 0.14 0.15
Annual prob. of exceed. - Wind 1:500
7-8 0.01 0.02 0.25 0.27
Annual prob. of exceed. - Snow 1:150
8-9 0.03 0 0.14 0.15
Roof Type Hip
3,505 mm 9 - 10 0.01 0.02 0.26 0.27
Building Length [m] 19.8
10 - 11 0.03 0 0.14 0.15
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 11 - 12 0.01 0.02 0.25 0.27
Avg. Roof Height [m] 6.3 12 - 13 0.04 0 0.14 0.15
Enclosed? Enclosed 13 - 14 0.07 0.03 0.26 0.31
14 - 15 0.07 0 0.36 0.41
For complete job environment details, refer to the job
15 - 16 0 0 0.36 0.36
Enviroments Report.
Bottom Chord
17 - 18 0 0 0.11 0.11
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 18 - 19 0.01 0.02 0.11 0.13
19 - 20 0.03 0.01 0.1 0.12
Load Value 20 - 21 0.01 0.02 0.15 0.15
Loaded Width (Actual) 403 21 - 22 0.03 0.01 0.1 0.12
Floor Dead Load (KPa) 0.63 22 - 23 0.01 0.02 0.15 0.15
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,505 mm Heel 283 mm 23 - 24 0.03 0.01 0.1 0.12
Floor Point Load (KPa) 1.80 24 - 25 0.01 0.02 0.15 0.15
Ceiling Dead Load (KPa) 0.15 25 - 26 0.03 0.01 0.1 0.12
Ceiling Live Load (KPa) 0.00 26 - 27 0.01 0.02 0.15 0.15
Ceiling Point Load (KPa) 1.10 27 - 28 0.03 0.01 0.1 0.12
28 - 29 0.01 0.02 0.15 0.15
29 - 30 0.04 0.04 0.14 0.18
Truss Summary 30 - 31 0 0.04 0.35 0.39
31 - 32 0 0 0.34 0.34
Item Value
Webs
Steel 6050-G550-0.75
17 - 1 0.05 0.01 0 0.05
Width [m] 3.5 Reactions 32 - 16 0.03 0 0 0.04
Height [m] 0.3 18 - 2 0.07 0.01 0.01 0.07
Loaded Width 403 Reaction @ Node 17 Reaction @ Node 18 Reaction @ Node 20 Reaction @ Node 22 Reaction @ Node 24 Reaction @ Node 26 Reaction @ Node 28 Reaction @ Node 30 3 - 19 0.06 0 0.01 0.07
Purlin Spacing 250 Max. Ult 23 Max. Ult 383 Max. Ult 756 Max. Ult 692 Max. Ult 710 Max. Ult 696 Max. Ult 896 Max. Ult 95 20 - 4 0.08 0.01 0.01 0.08
Batten Spacing 600 Min. Ult -5 Min. Ult 79 Min. Ult 138 Min. Ult 127 Min. Ult 130 Min. Ult 128 Min. Ult 162 Min. Ult 24 5 - 21 0.06 0.01 0.01 0.07
BC Span [m] 3.5 22 - 6 0.08 0.01 0.01 0.08
Steel [m] 11.9 7 - 23 0.06 0.01 0.01 0.07
Weight [kg] 12.4 24 - 8 0.08 0.01 0.01 0.08
Reaction @ Node 31
Max. Deflection Up 0.100 9 - 25 0.06 0.01 0.01 0.07
Max. Ult 1,060 26 - 10 0.08 0.01 0.01 0.08
Max. Deflection Down -0.161
Min. Ult 191 11 - 27 0.06 0.01 0.01 0.07
Max CR - Top Chord 0.41
Max CR - Bottom Chord 0.39 28 - 12 0.08 0.01 0.01 0.09
Status Pass 13 - 29 0.07 0.05 0.01 0.08
30 - 14 0.08 0.01 0.01 0.08
Nodes / Deflections 15 - 31 0.12 0 0.01 0.13
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0 22 (1005, -251) 0.0 0.0 0.0 0.0
2 (243, -34) 0.0 0.0 0.0 0.0 23 (1378, -251) 0.0 0.0 0.0 0.0
Dead Load -0.06 1.82 0.03
3 (324, -34) 0.0 0.0 0.0 0.0 24 (1459, -251) 0.0 0.0 0.0 0.0
Live Load -0.16 2.18 0.07
4 (697, -34) 0.0 0.0 0.0 0.0 25 (1832, -251) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (778, -34) 0.0 0.0 0.0 0.0 26 (1914, -251) 0.0 0.0 0.0 0.0
6 (1151, -34) 0.0 0.0 0.0 0.0 27 (2287, -251) 0.0 0.0 0.0 0.0
7 (1232, -34) 0.0 0.0 0.0 0.0 28 (2368, -251) 0.0 0.0 0.0 0.0
8 (1605, -34) 0.0 0.0 0.0 0.0 29 (2741, -251) 0.0 0.0 0.0 0.0
9 (1687, -34) 0.0 0.0 0.0 0.0 30 (2822, -251) 0.0 0.0 0.0 0.0
10 (2060, -34) 0.0 0.0 0.0 0.0 31 (3207, -251) 0.0 0.0 0.0 0.0
11 (2141, -34) 0.0 0.0 0.0 0.0 32 (3479, -251) -0.1 -0.2 0.0 0.0
12 (2514, -34) 0.0 0.0 0.0 0.0
13 (2595, -34) 0.0 0.0 0.0 0.0
14 (2969, -34) 0.0 0.0 0.0 0.0
15 (3050, -34) 0.0 0.0 0.0 0.0
16 (3479, -34) -0.1 -0.2 0.0 0.0
17 (26, -251) 0.0 0.0 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (470, -251) 0.0 0.0 0.0 0.0
20 (551, -251) 0.0 0.0 0.0 0.0
21 (924, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F242
Identical Trusses
Environment Truss F242
F242 F243 F244 F245
Site Data F246 F247 F248 F249
Elevation ASL [m] 10 F250
Building Data
Wind Code AS/NZS 1170.2 9 Identical Trusses
Code AU
Building Function A Forces
Importance Level 2
Annual prob. of exceed. - Wind 1:500 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Snow 1:150 Top Chord
Roof Type Hip 1-2 0 0 0.34 0.34
3,505 mm 2-3 0.11 0 0.34 0.42
Building Length [m] 19.8
Building Width [m] 25.1 3-4 0.19 0 0.38 0.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Avg. Roof Height [m] 6.3 4-5 0.27 0 0.26 0.5
Enclosed? Enclosed 5-6 0.32 0 0.42 0.68
6-7 0.39 0 0.2 0.55
For complete job environment details, refer to the job 7-8 0.39 0 0.44 0.77
Enviroments Report. 8-9 0.43 0 0.15 0.55
9 - 10 0.39 0 0.44 0.77
10 - 11 0.39 0 0.2 0.55
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 11 - 12 0.32 0 0.42 0.68
12 - 13 0.27 0 0.26 0.5
Load Value
13 - 14 0.19 0 0.38 0.5
Loaded Width (Actual) 406
14 - 15 0.11 0 0.34 0.42
Floor Dead Load (KPa) 0.63
Heel 283 mm BC 3,505 mm Heel 283 mm 15 - 16 0 0 0.34 0.34
Floor Live Load (KPa) 1.92 Bottom Chord
Floor Point Load (KPa) 1.80 17 - 18 0 0 0.11 0.11
Ceiling Dead Load (KPa) 0.15 18 - 19 0 0.06 0.16 0.21
Ceiling Live Load (KPa) 0.00 19 - 20 0 0.11 0.2 0.3
Ceiling Point Load (KPa) 1.10 20 - 21 0 0.16 0.2 0.35
21 - 22 0 0.19 0.15 0.34
Truss Summary 22 - 23 0 0.23 0.21 0.38
23 - 24 0 0.23 0.12 0.35
Item Value 24 - 25 0 0.25 0.21 0.37
Steel 6050-G550-0.75 25 - 26 0 0.23 0.12 0.35
26 - 27 0 0.23 0.21 0.38
Width [m] 3.5 Reactions 27 - 28 0 0.19 0.15 0.34
Height [m] 0.3
28 - 29 0 0.16 0.2 0.35
Loaded Width 406 Reaction @ Node 18 Reaction @ Node 31
29 - 30 0 0.11 0.2 0.3
Purlin Spacing 250 Max. Ult 2,675 Max. Ult 2,675
30 - 31 0 0.06 0.16 0.21
Batten Spacing 600 Min. Ult 492 Min. Ult 492
31 - 32 0 0 0.11 0.11
BC Span [m] 3.5
Webs
Steel [m] 12.0
17 - 1 0.04 0.02 0 0.04
Weight [kg] 12.5 32 - 16 0.04 0.02 0 0.04
Max. Deflection Up 0.148 18 - 2 0.18 0 0.02 0.2
Max. Deflection Down -2.219 3 - 19 0 0.12 0.01 0.14
Max CR - Top Chord 0.77 20 - 4 0.16 0 0.01 0.17
Max CR - Bottom Chord 0.38 5 - 21 0 0.11 0.01 0.12
Status Pass 22 - 6 0.12 0.02 0.01 0.13
Nodes / Deflections 7 - 23 0.04 0.08 0.01 0.08
24 - 8 0.08 0.05 0.01 0.09
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 9 - 25 0.08 0.05 0.01 0.09
Maximum Limit Ratio 1 (26, -34) 0.1 0.1 0.0 0.0 22 (1066, -251) -0.7 -1.8 0.0 0.0 26 - 10 0.04 0.08 0.01 0.08
2 (258, -34) -0.1 -0.3 0.0 0.0 23 (1470, -251) -0.9 -2.2 0.0 0.0 11 - 27 0.12 0.02 0.01 0.13
Dead Load -0.90 11.03 0.08
3 (339, -34) -0.2 -0.5 0.0 0.0 24 (1551, -251) -0.9 -2.2 0.0 0.0 28 - 12 0 0.11 0.01 0.12
Live Load -2.22 13.23 0.17
4 (743, -34) -0.5 -1.3 0.0 0.0 25 (1954, -251) -0.9 -2.2 0.0 0.0 13 - 29 0.16 0 0.01 0.17
Dead Load 0.00 0.00 0.00
5 (824, -34) -0.6 -1.5 0.0 0.0 26 (2036, -251) -0.9 -2.2 0.0 0.0 30 - 14 0 0.12 0.01 0.14
6 (1227, -34) -0.8 -2.0 0.0 0.0 27 (2439, -251) -0.7 -1.8 0.0 0.0 15 - 31 0.18 0 0.02 0.2
7 (1309, -34) -0.8 -2.1 0.0 0.0 28 (2520, -251) -0.7 -1.7 0.0 0.0
8 (1712, -34) -0.9 -2.3 0.0 0.0 29 (2924, -251) -0.4 -1.0 0.0 0.0
9 (1793, -34) -0.9 -2.3 0.0 0.0 30 (3005, -251) -0.3 -0.8 0.0 0.0
10 (2197, -34) -0.8 -2.1 0.0 0.0 31 (3407, -251) 0.0 0.0 0.0 0.0
11 (2278, -34) -0.8 -2.0 0.0 0.0 32 (3479, -251) 0.1 0.1 0.0 0.0
12 (2682, -34) -0.6 -1.5 0.0 0.0
13 (2763, -34) -0.5 -1.3 0.0 0.0
14 (3166, -34) -0.2 -0.5 0.0 0.0
15 (3248, -34) -0.1 -0.3 0.0 0.0
16 (3479, -34) 0.1 0.1 0.0 0.0
17 (26, -251) 0.1 0.1 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (500, -251) -0.3 -0.8 0.0 0.0
20 (581, -251) -0.4 -1.0 0.0 0.0
21 (985, -251) -0.7 -1.7 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F251
Identical Trusses
Environment Truss F251
F251 F252 F253 F254
Site Data
Elevation ASL [m] 10 4 Identical Trusses
Building Data
Wind Code AS/NZS 1170.2 Forces
Code AU
Building Function A Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Importance Level 2 Top Chord
Annual prob. of exceed. - Wind 1:500 1-2 0 0 0.34 0.34
Annual prob. of exceed. - Snow 1:150 2-3 0.11 0 0.34 0.42
Roof Type Hip 3-4 0.19 0 0.38 0.5
3,505 mm 4-5 0.27 0 0.26 0.5
Building Length [m] 19.8
Building Width [m] 25.1 5-6 0.32 0 0.42 0.68
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 6-7 0.39 0 0.2 0.55
Avg. Roof Height [m] 6.3
7-8 0.39 0 0.44 0.77
Enclosed? Enclosed
8-9 0.43 0 0.15 0.55
For complete job environment details, refer to the job 9 - 10 0.39 0 0.44 0.77
Enviroments Report. 10 - 11 0.39 0 0.2 0.55
11 - 12 0.32 0 0.42 0.68
12 - 13 0.27 0 0.26 0.5
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 13 - 14 0.19 0 0.38 0.5
14 - 15 0.11 0 0.34 0.42
Load Value
15 - 16 0 0 0.34 0.34
Loaded Width (Actual) 406 Bottom Chord
Floor Dead Load (KPa) 0.63 17 - 18 0 0 0.11 0.11
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,505 mm Heel 283 mm
18 - 19 0 0.06 0.16 0.21
Floor Point Load (KPa) 1.80 19 - 20 0 0.11 0.2 0.3
Ceiling Dead Load (KPa) 0.15 20 - 21 0 0.16 0.2 0.35
Ceiling Live Load (KPa) 0.00 21 - 22 0 0.19 0.15 0.34
Ceiling Point Load (KPa) 1.10 22 - 23 0 0.23 0.21 0.38
23 - 24 0 0.23 0.12 0.35
24 - 25 0 0.25 0.21 0.37
Truss Summary
25 - 26 0 0.23 0.12 0.35
Item Value 26 - 27 0 0.23 0.21 0.38
Steel 6050-G550-0.75 27 - 28 0 0.19 0.15 0.34
28 - 29 0 0.16 0.2 0.35
Width [m] 3.5 Reactions 29 - 30 0 0.11 0.2 0.3
Height [m] 0.3
30 - 31 0 0.06 0.16 0.21
Loaded Width 406 Reaction @ Node 18 Reaction @ Node 31
31 - 32 0 0 0.11 0.11
Purlin Spacing 250 Max. Ult 2,675 Max. Ult 2,675 Webs
Batten Spacing 600 Min. Ult 492 Min. Ult 492
17 - 1 0.04 0.02 0 0.04
BC Span [m] 3.5 32 - 16 0.04 0.02 0 0.04
Steel [m] 12.0 18 - 2 0.18 0 0.02 0.2
Weight [kg] 12.5 3 - 19 0 0.12 0.01 0.14
Max. Deflection Up 0.148 20 - 4 0.16 0 0.01 0.17
Max. Deflection Down -2.219 5 - 21 0 0.11 0.01 0.12
Max CR - Top Chord 0.77 22 - 6 0.12 0.02 0.01 0.13
Max CR - Bottom Chord 0.38 7 - 23 0.04 0.08 0.01 0.08
Status Pass 24 - 8 0.08 0.05 0.01 0.09
Nodes / Deflections 9 - 25 0.08 0.05 0.01 0.09
26 - 10 0.04 0.08 0.01 0.08
BC Deflections Summary 11 - 27 0.12 0.02 0.01 0.13
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.1 0.1 0.0 0.0 22 (1066, -251) -0.7 -1.8 0.0 0.0 28 - 12 0 0.11 0.01 0.12
Maximum Limit Ratio
2 (258, -34) -0.1 -0.3 0.0 0.0 23 (1470, -251) -0.9 -2.2 0.0 0.0 13 - 29 0.16 0 0.01 0.17
Dead Load -0.90 11.03 0.08
3 (339, -34) -0.2 -0.5 0.0 0.0 24 (1551, -251) -0.9 -2.2 0.0 0.0 30 - 14 0 0.12 0.01 0.14
Live Load -2.22 13.23 0.17
4 (743, -34) -0.5 -1.3 0.0 0.0 25 (1954, -251) -0.9 -2.2 0.0 0.0 15 - 31 0.18 0 0.02 0.2
Dead Load 0.00 0.00 0.00
5 (824, -34) -0.6 -1.5 0.0 0.0 26 (2036, -251) -0.9 -2.2 0.0 0.0
6 (1227, -34) -0.8 -2.0 0.0 0.0 27 (2439, -251) -0.7 -1.8 0.0 0.0
7 (1309, -34) -0.8 -2.1 0.0 0.0 28 (2520, -251) -0.7 -1.7 0.0 0.0
8 (1712, -34) -0.9 -2.3 0.0 0.0 29 (2924, -251) -0.4 -1.0 0.0 0.0
9 (1793, -34) -0.9 -2.3 0.0 0.0 30 (3005, -251) -0.3 -0.8 0.0 0.0
10 (2197, -34) -0.8 -2.1 0.0 0.0 31 (3407, -251) 0.0 0.0 0.0 0.0
11 (2278, -34) -0.8 -2.0 0.0 0.0 32 (3479, -251) 0.1 0.1 0.0 0.0
12 (2682, -34) -0.6 -1.5 0.0 0.0
13 (2763, -34) -0.5 -1.3 0.0 0.0
14 (3166, -34) -0.2 -0.5 0.0 0.0
15 (3248, -34) -0.1 -0.3 0.0 0.0
16 (3479, -34) 0.1 0.1 0.0 0.0
17 (26, -251) 0.1 0.1 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (500, -251) -0.3 -0.8 0.0 0.0
20 (581, -251) -0.4 -1.0 0.0 0.0
21 (985, -251) -0.7 -1.7 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F255
Identical Trusses
Environment Truss F255
F255 F256 F257 F258
Site Data F259 F260 F261 F262
Elevation ASL [m] 10 F263 F264 F265 F266
Building Data F267 F268 F269
Wind Code AS/NZS 1170.2
Code AU 15 Identical Trusses
Building Function A
Importance Level 2 Forces
Annual prob. of exceed. - Wind 1:500
Annual prob. of exceed. - Snow 1:150 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Roof Type Hip Top Chord
3,505 mm 1-2 0 0 0.34 0.34
Building Length [m] 19.8
Building Width [m] 25.1 2-3 0.11 0 0.34 0.42
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Avg. Roof Height [m] 6.3 3-4 0.19 0 0.38 0.5
Enclosed? Enclosed 4-5 0.27 0 0.26 0.5
5-6 0.32 0 0.42 0.68
For complete job environment details, refer to the job 6-7 0.39 0 0.2 0.55
Enviroments Report. 7-8 0.39 0 0.44 0.77
8-9 0.43 0 0.15 0.55
9 - 10 0.39 0 0.44 0.77
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 10 - 11 0.39 0 0.2 0.55
11 - 12 0.32 0 0.42 0.68
Load Value
12 - 13 0.27 0 0.26 0.5
Loaded Width (Actual) 406
13 - 14 0.19 0 0.38 0.5
Floor Dead Load (KPa) 0.63
Heel 283 mm BC 3,505 mm Heel 283 mm 14 - 15 0.11 0 0.34 0.42
Floor Live Load (KPa) 1.92
15 - 16 0 0 0.34 0.34
Floor Point Load (KPa) 1.80 Bottom Chord
Ceiling Dead Load (KPa) 0.15 17 - 18 0 0 0.11 0.11
Ceiling Live Load (KPa) 0.00 18 - 19 0 0.06 0.16 0.21
Ceiling Point Load (KPa) 1.10 19 - 20 0 0.11 0.2 0.3
20 - 21 0 0.16 0.2 0.35
Truss Summary 21 - 22 0 0.19 0.15 0.34
22 - 23 0 0.23 0.21 0.38
Item Value 23 - 24 0 0.23 0.12 0.35
Steel 6050-G550-0.75 24 - 25 0 0.25 0.21 0.37
25 - 26 0 0.23 0.12 0.35
Width [m] 3.5 Reactions
Height [m] 0.3 26 - 27 0 0.23 0.21 0.38
Loaded Width 406 27 - 28 0 0.19 0.15 0.34
Reaction @ Node 18 Reaction @ Node 31
28 - 29 0 0.16 0.2 0.35
Purlin Spacing 250 Max. Ult 2,675 Max. Ult 2,675
29 - 30 0 0.11 0.2 0.3
Batten Spacing 600 Min. Ult 492 Min. Ult 492
30 - 31 0 0.06 0.16 0.21
BC Span [m] 3.5
31 - 32 0 0 0.11 0.11
Steel [m] 12.0
Webs
Weight [kg] 12.5
17 - 1 0.04 0.02 0 0.04
Max. Deflection Up 0.148 32 - 16 0.04 0.02 0 0.04
Max. Deflection Down -2.219 18 - 2 0.18 0 0.02 0.2
Max CR - Top Chord 0.77 3 - 19 0 0.12 0.01 0.14
Max CR - Bottom Chord 0.38 20 - 4 0.16 0 0.01 0.17
Status Pass 5 - 21 0 0.11 0.01 0.12
Nodes / Deflections 22 - 6 0.12 0.02 0.01 0.13
BC Deflections Summary 7 - 23 0.04 0.08 0.01 0.08
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 24 - 8 0.08 0.05 0.01 0.09
Maximum Limit Ratio 1 (26, -34) 0.1 0.1 0.0 0.0 22 (1066, -251) -0.7 -1.8 0.0 0.0 9 - 25 0.08 0.05 0.01 0.09
2 (258, -34) -0.1 -0.3 0.0 0.0 23 (1470, -251) -0.9 -2.2 0.0 0.0 26 - 10 0.04 0.08 0.01 0.08
Dead Load -0.90 11.03 0.08
3 (339, -34) -0.2 -0.5 0.0 0.0 24 (1551, -251) -0.9 -2.2 0.0 0.0 11 - 27 0.12 0.02 0.01 0.13
Live Load -2.22 13.23 0.17
4 (743, -34) -0.5 -1.3 0.0 0.0 25 (1954, -251) -0.9 -2.2 0.0 0.0 28 - 12 0 0.11 0.01 0.12
Dead Load 0.00 0.00 0.00
5 (824, -34) -0.6 -1.5 0.0 0.0 26 (2036, -251) -0.9 -2.2 0.0 0.0 13 - 29 0.16 0 0.01 0.17
6 (1227, -34) -0.8 -2.0 0.0 0.0 27 (2439, -251) -0.7 -1.8 0.0 0.0 30 - 14 0 0.12 0.01 0.14
7 (1309, -34) -0.8 -2.1 0.0 0.0 28 (2520, -251) -0.7 -1.7 0.0 0.0 15 - 31 0.18 0 0.02 0.2
8 (1712, -34) -0.9 -2.3 0.0 0.0 29 (2924, -251) -0.4 -1.0 0.0 0.0
9 (1793, -34) -0.9 -2.3 0.0 0.0 30 (3005, -251) -0.3 -0.8 0.0 0.0
10 (2197, -34) -0.8 -2.1 0.0 0.0 31 (3407, -251) 0.0 0.0 0.0 0.0
11 (2278, -34) -0.8 -2.0 0.0 0.0 32 (3479, -251) 0.1 0.1 0.0 0.0
12 (2682, -34) -0.6 -1.5 0.0 0.0
13 (2763, -34) -0.5 -1.3 0.0 0.0
14 (3166, -34) -0.2 -0.5 0.0 0.0
15 (3248, -34) -0.1 -0.3 0.0 0.0
16 (3479, -34) 0.1 0.1 0.0 0.0
17 (26, -251) 0.1 0.1 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (500, -251) -0.3 -0.8 0.0 0.0
20 (581, -251) -0.4 -1.0 0.0 0.0
21 (985, -251) -0.7 -1.7 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F270

Environment Truss F270 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.33 0.33
Wind Code AS/NZS 1170.2 2-3 0.11 0 0.33 0.41
Code AU 3-4 0.18 0 0.38 0.49
Building Function A 4-5 0.27 0 0.26 0.49
Importance Level 2 5-6 0.32 0 0.42 0.67
6-7 0.38 0 0.2 0.54
Annual prob. of exceed. - Wind 1:500
7-8 0.38 0 0.43 0.75
Annual prob. of exceed. - Snow 1:150
8-9 0.42 0 0.15 0.54
Roof Type Hip
3,505 mm 9 - 10 0.38 0 0.43 0.75
Building Length [m] 19.8
10 - 11 0.38 0 0.2 0.54
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 11 - 12 0.32 0 0.42 0.67
Avg. Roof Height [m] 6.3 12 - 13 0.27 0 0.26 0.49
Enclosed? Enclosed 13 - 14 0.18 0 0.38 0.49
14 - 15 0.1 0 0.33 0.41
For complete job environment details, refer to the job
15 - 16 0 0 0.33 0.33
Enviroments Report.
Bottom Chord
17 - 18 0 0 0.11 0.11
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 18 - 19 0 0.06 0.16 0.21
19 - 20 0 0.11 0.19 0.3
Load Value 20 - 21 0 0.16 0.2 0.35
Loaded Width (Actual) 356 21 - 22 0 0.18 0.15 0.33
Floor Dead Load (KPa) 0.63 22 - 23 0 0.22 0.2 0.37
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,505 mm Heel 283 mm 23 - 24 0 0.22 0.12 0.34
Floor Point Load (KPa) 1.80 24 - 25 0 0.24 0.21 0.37
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.22 0.12 0.34
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.22 0.2 0.37
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.18 0.15 0.33
28 - 29 0 0.16 0.2 0.35
29 - 30 0 0.11 0.19 0.3
Truss Summary 30 - 31 0 0.06 0.16 0.21
31 - 32 0 0 0.11 0.11
Item Value
Webs
Steel 6050-G550-0.75
17 - 1 0.04 0.02 0 0.04
Width [m] 3.5 Reactions 32 - 16 0.04 0.02 0 0.04
Height [m] 0.3 18 - 2 0.18 0 0.02 0.19
Loaded Width 356 Reaction @ Node 18 Reaction @ Node 31 3 - 19 0 0.12 0.01 0.13
Purlin Spacing 250 Max. Ult 2,346 Max. Ult 2,346 20 - 4 0.15 0 0.01 0.16
Batten Spacing 600 Min. Ult 432 Min. Ult 432 5 - 21 0 0.11 0.01 0.12
BC Span [m] 3.5 22 - 6 0.12 0.02 0.01 0.12
Steel [m] 12.0 7 - 23 0.04 0.07 0.01 0.08
Weight [kg] 12.5 24 - 8 0.08 0.05 0.01 0.08
Max. Deflection Up 0.129 9 - 25 0.08 0.05 0.01 0.08
Max. Deflection Down -1.946 26 - 10 0.04 0.07 0.01 0.08
Max CR - Top Chord 0.75 11 - 27 0.12 0.02 0.01 0.12
Max CR - Bottom Chord 0.37 28 - 12 0 0.11 0.01 0.12
Status Pass 13 - 29 0.15 0 0.01 0.16
30 - 14 0 0.12 0.01 0.13
Nodes / Deflections 15 - 31 0.18 0 0.02 0.19
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.1 0.1 0.0 0.0 22 (1066, -251) -0.6 -1.6 0.0 0.0
2 (258, -34) -0.1 -0.3 0.0 0.0 23 (1470, -251) -0.8 -1.9 0.0 0.0
Dead Load -0.79 11.03 0.07
3 (339, -34) -0.2 -0.5 0.0 0.0 24 (1551, -251) -0.8 -1.9 0.0 0.0
Live Load -1.95 13.23 0.15
4 (743, -34) -0.5 -1.1 0.0 0.0 25 (1954, -251) -0.8 -1.9 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (824, -34) -0.5 -1.3 0.0 0.0 26 (2036, -251) -0.8 -1.9 0.0 0.0
6 (1227, -34) -0.7 -1.7 0.0 0.0 27 (2439, -251) -0.6 -1.6 0.0 0.0
7 (1309, -34) -0.7 -1.8 0.0 0.0 28 (2520, -251) -0.6 -1.5 0.0 0.0
8 (1712, -34) -0.8 -2.0 0.0 0.0 29 (2924, -251) -0.4 -0.9 0.0 0.0
9 (1793, -34) -0.8 -2.0 0.0 0.0 30 (3005, -251) -0.3 -0.7 0.0 0.0
10 (2197, -34) -0.7 -1.8 0.0 0.0 31 (3407, -251) 0.0 0.0 0.0 0.0
11 (2278, -34) -0.7 -1.7 0.0 0.0 32 (3479, -251) 0.1 0.1 0.0 0.0
12 (2682, -34) -0.5 -1.3 0.0 0.0
13 (2763, -34) -0.5 -1.1 0.0 0.0
14 (3166, -34) -0.2 -0.5 0.0 0.0
15 (3248, -34) -0.1 -0.3 0.0 0.0
16 (3479, -34) 0.1 0.1 0.0 0.0
17 (26, -251) 0.1 0.1 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (500, -251) -0.3 -0.7 0.0 0.0
20 (581, -251) -0.4 -0.9 0.0 0.0
21 (985, -251) -0.6 -1.5 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F271

Environment Truss F271 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.34 0.34
Wind Code AS/NZS 1170.2 2-3 0.14 0 0.34 0.45
Code AU 3-4 0.26 0 0.27 0.46
Building Function A 4-5 0.38 0 0.23 0.57
Importance Level 2 5-6 0.46 0 0.3 0.65
6-7 0.53 0 0.15 0.64
Annual prob. of exceed. - Wind 1:500
7-8 0.56 0 0.31 0.71
Annual prob. of exceed. - Snow 1:150
8-9 0.58 0 0.1 0.63
Roof Type Hip
3,505 mm 9 - 10 0.56 0 0.31 0.71
Building Length [m] 19.8
10 - 11 0.53 0 0.15 0.64
Building Width [m] 25.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 11 - 12 0.46 0 0.3 0.65
Avg. Roof Height [m] 6.3 12 - 13 0.38 0 0.23 0.57
Enclosed? Enclosed 13 - 14 0.26 0 0.27 0.46
14 - 15 0.14 0 0.34 0.45
For complete job environment details, refer to the job
15 - 16 0 0 0.34 0.34
Enviroments Report.
Bottom Chord
17 - 18 0 0 0.07 0.08
Load Summary 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 18 - 19 0 0.1 0.17 0.28
19 - 20 0 0.19 0.29 0.48
Load Value 20 - 21 0 0.28 0.29 0.57
Loaded Width (Actual) 1,100 21 - 22 0 0.34 0.18 0.52
Floor Dead Load (KPa) 0.63 22 - 23 0 0.39 0.18 0.57
Floor Live Load (KPa) 1.92 Heel 283 mm BC 3,505 mm Heel 283 mm 23 - 24 0 0.41 0.11 0.52
Floor Point Load (KPa) 1.80 24 - 25 0 0.42 0.16 0.54
Ceiling Dead Load (KPa) 0.15 25 - 26 0 0.41 0.11 0.52
Ceiling Live Load (KPa) 0.00 26 - 27 0 0.39 0.18 0.57
Ceiling Point Load (KPa) 1.10 27 - 28 0 0.34 0.18 0.52
28 - 29 0 0.28 0.29 0.57
29 - 30 0 0.19 0.29 0.48
Truss Summary 30 - 31 0 0.1 0.17 0.28
31 - 32 0 0 0.07 0.08
Item Value
Webs
Steel 6050-G550-0.95
17 - 1 0.02 0.02 0 0.02
Width [m] 3.5 Reactions 32 - 16 0.02 0.02 0 0.02
Height [m] 0.3 18 - 2 0.24 0 0.02 0.25
Loaded Width 1,100 Reaction @ Node 18 Reaction @ Node 31 3 - 19 0 0.19 0.01 0.2
Purlin Spacing 250 Max. Ult 7,248 Max. Ult 7,248 20 - 4 0.2 0 0.01 0.21
Batten Spacing 600 Min. Ult 1,333 Min. Ult 1,333 5 - 21 0 0.14 0.01 0.14
BC Span [m] 3.5 22 - 6 0.12 0 0.01 0.12
Steel [m] 12.0 7 - 23 0.02 0.07 0 0.07
Weight [kg] 15.9 24 - 8 0.05 0.03 0 0.06
Max. Deflection Up 0.316 9 - 25 0.05 0.03 0 0.06
Max. Deflection Down -4.747 26 - 10 0.02 0.07 0 0.07
Max CR - Top Chord 0.71 11 - 27 0.12 0 0.01 0.12
Max CR - Bottom Chord 0.57 28 - 12 0 0.14 0.01 0.14
Status Pass 13 - 29 0.2 0 0.01 0.21
30 - 14 0 0.19 0.01 0.2
Nodes / Deflections 15 - 31 0.24 0 0.02 0.25
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.1 0.3 0.0 0.0 22 (1066, -251) -1.6 -3.9 0.0 0.0
2 (258, -34) -0.3 -0.7 0.0 0.0 23 (1470, -251) -1.9 -4.7 0.0 0.0
Dead Load -1.93 11.03 0.17
3 (339, -34) -0.5 -1.1 0.0 0.0 24 (1551, -251) -1.9 -4.7 0.0 0.0
Live Load -4.75 13.23 0.36
4 (743, -34) -1.1 -2.8 0.0 0.0 25 (1954, -251) -1.9 -4.7 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (824, -34) -1.3 -3.1 0.0 0.0 26 (2036, -251) -1.9 -4.7 0.0 0.0
6 (1227, -34) -1.7 -4.3 0.0 0.0 27 (2439, -251) -1.6 -3.9 0.0 0.0
7 (1309, -34) -1.8 -4.4 0.0 0.0 28 (2520, -251) -1.5 -3.6 0.0 0.0
8 (1712, -34) -2.0 -4.8 0.0 0.0 29 (2924, -251) -0.9 -2.2 0.0 0.0
9 (1793, -34) -2.0 -4.8 0.0 0.0 30 (3005, -251) -0.7 -1.8 0.0 0.0
10 (2197, -34) -1.8 -4.4 0.0 0.0 31 (3407, -251) 0.0 0.0 0.0 0.0
11 (2278, -34) -1.7 -4.3 0.0 0.0 32 (3479, -251) 0.1 0.3 0.0 0.0
12 (2682, -34) -1.3 -3.1 0.0 0.0
13 (2763, -34) -1.1 -2.8 0.0 0.0
14 (3166, -34) -0.5 -1.1 0.0 0.0
15 (3248, -34) -0.3 -0.7 0.0 0.0
16 (3479, -34) 0.1 0.3 0.0 0.0
17 (26, -251) 0.1 0.3 0.0 0.0
18 (99, -251) 0.0 0.0 0.0 0.0
19 (500, -251) -0.7 -1.8 0.0 0.0
20 (581, -251) -0.9 -2.2 0.0 0.0
21 (985, -251) -1.5 -3.6 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F272
Identical Trusses
Environment Truss F272
F272 F273 F274 F275
Site Data F276 F277 F278 F279
Elevation ASL [m] 10 F280 F281 F282 F283
Building Data F284 F285
Wind Code AS/NZS 1170.2
Code AU 14 Identical Trusses
Building Function A
Importance Level 2
1,676 mm Forces
Annual prob. of exceed. - Wind 1:500
Annual prob. of exceed. - Snow 1:150 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Roof Type Hip 1 2 3 4 5 6 7 8 Top Chord
Building Length [m] 19.8 1-2 0 0 0.27 0.27
Building Width [m] 25.1 2-3 0.09 0 0.27 0.34
Avg. Roof Height [m] 6.3 3-4 0.13 0 0.42 0.51
Enclosed? Enclosed 4-5 0.17 0 0.21 0.32
5-6 0.12 0 0.39 0.48
For complete job environment details, refer to the job 6-7 0.09 0 0.29 0.36
Enviroments Report. 7-8 0 0 0.29 0.29
Bottom Chord
9 - 10 0 0 0.26 0.31
Load Summary 10 - 11 0 0.05 0.26 0.32
11 - 12 0 0.07 0.11 0.19
Load Value
9 10 11 12 13 14 15 16 12 - 13 0 0.1 0.2 0.25
Loaded Width (Actual) 403
13 - 14 0 0.07 0.11 0.18
Floor Dead Load (KPa) 0.63
14 - 15 0 0.05 0.18 0.2
Floor Live Load (KPa) 1.92
15 - 16 0 0 0.12 0.12
Floor Point Load (KPa) 1.80 Webs
Ceiling Dead Load (KPa) 0.15 9-1 0.05 0.02 0 0.05
Ceiling Live Load (KPa) 0.00 Heel 283 mm BC 1,676 mm Heel 283 mm 16 - 8 0.04 0.02 0 0.05
Ceiling Point Load (KPa) 1.10 10 - 2 0.15 0 0.01 0.16
3 - 11 0 0.08 0.01 0.08
Truss Summary 12 - 4 0.07 0.02 0.01 0.07
5 - 13 0.08 0.01 0.01 0.09
Item Value 14 - 6 0.02 0.07 0.01 0.08
Steel 6050-G550-0.75 7 - 15 0.14 0 0.01 0.15
Width [m] 1.7 Reactions
Height [m] 0.3
Loaded Width 403 Reaction @ Node 9 Reaction @ Node 15
Purlin Spacing 250 Max. Ult 1,191 Max. Ult 1,307
Batten Spacing 600 Min. Ult 219 Min. Ult 240
BC Span [m] 1.7
Steel [m] 5.9
Weight [kg] 6.1
Max. Deflection Up 0.018
Max. Deflection Down -0.186
Max CR - Top Chord 0.51
Max CR - Bottom Chord 0.32
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (276, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.08 5.17 0.01
3 (357, -34) -0.1 -0.2 0.0 0.0
Live Load -0.19 6.21 0.03
4 (798, -34) -0.1 -0.2 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (879, -34) -0.1 -0.2 0.0 0.0
6 (1319, -34) 0.0 -0.1 0.0 0.0
7 (1400, -34) 0.0 -0.1 0.0 0.0
8 (1650, -34) 0.0 0.0 0.0 0.0
9 (26, -251) 0.0 0.0 0.0 0.0
10 (98, -251) 0.0 -0.1 0.0 0.0
11 (537, -251) -0.1 -0.2 0.0 0.0
12 (618, -251) -0.1 -0.2 0.0 0.0
13 (1058, -251) -0.1 -0.2 0.0 0.0
14 (1139, -251) -0.1 -0.1 0.0 0.0
15 (1578, -251) 0.0 0.0 0.0 0.0
16 (1650, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F286

Environment Truss F286 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.26 0.26
Wind Code AS/NZS 1170.2 2-3 0.09 0 0.26 0.33
Code AU 3-4 0.12 0 0.41 0.51
Building Function A 4-5 0.17 0 0.2 0.31
Importance Level 2 5-6 0.12 0 0.39 0.47
1,676 mm 6-7 0.08 0 0.29 0.35
Annual prob. of exceed. - Wind 1:500
7-8 0 0 0.29 0.29
Annual prob. of exceed. - Snow 1:150
Bottom Chord
Roof Type Hip 1 2 3 4 5 6 7 8
9 - 10 0 0 0.25 0.3
Building Length [m] 19.8
10 - 11 0 0.05 0.25 0.3
Building Width [m] 25.1
11 - 12 0 0.07 0.11 0.18
Avg. Roof Height [m] 6.3 12 - 13 0 0.1 0.2 0.24
Enclosed? Enclosed 13 - 14 0 0.07 0.1 0.17
14 - 15 0 0.05 0.18 0.2
For complete job environment details, refer to the job
15 - 16 0 0 0.12 0.12
Enviroments Report.
Webs
9-1 0.05 0.02 0 0.05
Load Summary 16 - 8 0.04 0.02 0 0.05
10 - 2 0.14 0 0.01 0.15
Load Value 3 - 11 0 0.07 0.01 0.08
Loaded Width (Actual) 278 9 10 11 12 13 14 15 16 12 - 4 0.07 0.02 0.01 0.07
Floor Dead Load (KPa) 0.63 5 - 13 0.08 0.01 0.01 0.08
Floor Live Load (KPa) 1.92 14 - 6 0.02 0.07 0.01 0.07
Floor Point Load (KPa) 1.80 7 - 15 0.13 0 0.01 0.14
Ceiling Dead Load (KPa) 0.15
Ceiling Live Load (KPa) 0.00 Heel 283 mm BC 1,676 mm Heel 283 mm
Ceiling Point Load (KPa) 1.10

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.7 Reactions
Height [m] 0.3
Loaded Width 278 Reaction @ Node 9 Reaction @ Node 15
Purlin Spacing 250 Max. Ult 821 Max. Ult 902
Batten Spacing 600 Min. Ult 151 Min. Ult 166
BC Span [m] 1.7
Steel [m] 5.9
Weight [kg] 6.1
Max. Deflection Up 0.013
Max. Deflection Down -0.128
Max CR - Top Chord 0.51
Max CR - Bottom Chord 0.30
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (276, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.05 5.17 0.01
3 (357, -34) 0.0 -0.1 0.0 0.0
Live Load -0.13 6.21 0.02
4 (798, -34) -0.1 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (879, -34) -0.1 -0.1 0.0 0.0
6 (1319, -34) 0.0 -0.1 0.0 0.0
7 (1400, -34) 0.0 0.0 0.0 0.0
8 (1650, -34) 0.0 0.0 0.0 0.0
9 (26, -251) 0.0 0.0 0.0 0.0
10 (98, -251) 0.0 0.0 0.0 0.0
11 (537, -251) 0.0 -0.1 0.0 0.0
12 (618, -251) -0.1 -0.1 0.0 0.0
13 (1058, -251) 0.0 -0.1 0.0 0.0
14 (1139, -251) 0.0 -0.1 0.0 0.0
15 (1578, -251) 0.0 0.0 0.0 0.0
16 (1650, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F287

Environment Truss F287 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.26 0.26
Wind Code AS/NZS 1170.2 2-3 0.09 0 0.26 0.33
Code AU 3-4 0.12 0 0.41 0.5
Building Function A 4-5 0.16 0 0.2 0.3
Importance Level 2 5-6 0.11 0 0.39 0.46
1,676 mm 6-7 0.08 0 0.28 0.34
Annual prob. of exceed. - Wind 1:500
7-8 0 0 0.28 0.28
Annual prob. of exceed. - Snow 1:150
Bottom Chord
Roof Type Hip 1 2 3 4 5 6 7 8
9 - 10 0 0 0.25 0.3
Building Length [m] 19.8
10 - 11 0 0.05 0.25 0.3
Building Width [m] 25.1
11 - 12 0 0.07 0.11 0.18
Avg. Roof Height [m] 6.3 12 - 13 0 0.09 0.2 0.24
Enclosed? Enclosed 13 - 14 0 0.07 0.1 0.17
14 - 15 0 0.05 0.18 0.2
For complete job environment details, refer to the job
15 - 16 0 0 0.12 0.12
Enviroments Report.
Webs
9-1 0.05 0.02 0 0.05
Load Summary 16 - 8 0.04 0.02 0 0.05
10 - 2 0.14 0 0.01 0.15
Load Value 3 - 11 0 0.07 0.01 0.08
Loaded Width (Actual) 195 9 10 11 12 13 14 15 16 12 - 4 0.07 0.02 0.01 0.07
Floor Dead Load (KPa) 0.63 5 - 13 0.08 0.01 0.01 0.08
Floor Live Load (KPa) 1.92 14 - 6 0.02 0.07 0.01 0.07
Floor Point Load (KPa) 1.80 7 - 15 0.13 0 0.01 0.14
Ceiling Dead Load (KPa) 0.15
Ceiling Live Load (KPa) 0.00 Heel 283 mm BC 1,676 mm Heel 283 mm
Ceiling Point Load (KPa) 1.10

Truss Summary
Item Value
Steel 6050-G550-0.75
Width [m] 1.7 Reactions
Height [m] 0.3
Loaded Width 195 Reaction @ Node 9 Reaction @ Node 15
Purlin Spacing 250 Max. Ult 576 Max. Ult 633
Batten Spacing 600 Min. Ult 106 Min. Ult 116
BC Span [m] 1.7
Steel [m] 5.9
Weight [kg] 6.1
Max. Deflection Up 0.009
Max. Deflection Down -0.090
Max CR - Top Chord 0.50
Max CR - Bottom Chord 0.30
Status Pass
Nodes / Deflections
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint
Maximum Limit Ratio 1 (26, -34) 0.0 0.0 0.0 0.0
2 (276, -34) 0.0 -0.1 0.0 0.0
Dead Load -0.04 5.17 0.01
3 (357, -34) 0.0 -0.1 0.0 0.0
Live Load -0.09 6.21 0.01
4 (798, -34) 0.0 -0.1 0.0 0.0
Dead Load 0.00 0.00 0.00
5 (879, -34) 0.0 -0.1 0.0 0.0
6 (1319, -34) 0.0 0.0 0.0 0.0
7 (1400, -34) 0.0 0.0 0.0 0.0
8 (1650, -34) 0.0 0.0 0.0 0.0
9 (26, -251) 0.0 0.0 0.0 0.0
10 (98, -251) 0.0 0.0 0.0 0.0
11 (537, -251) 0.0 -0.1 0.0 0.0
12 (618, -251) 0.0 -0.1 0.0 0.0
13 (1058, -251) 0.0 -0.1 0.0 0.0
14 (1139, -251) 0.0 -0.1 0.0 0.0
15 (1578, -251) 0.0 0.0 0.0 0.0
16 (1650, -251) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F11

Environment Truss F11 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0 0.02 0.21 0.2
Code AU 3-4 0 0.07 0.24 0.26
Building Function A 4-5 0 0.11 0.27 0.27
Importance Level 2 5-6 0 0.15 0.27 0.31
6-7 0 0.2 0.24 0.35
Annual prob. of exceed. - Wind 1:500
7-8 0 0.24 0.26 0.39
Annual prob. of exceed. - Snow 1:150
8-9 0.04 0.22 0.26 0.31
Roof Type Hip
9 - 10 0.09 0.21 0.25 0.32
Building Length [m] 19.8
10 - 11 0.16 0.18 0.25 0.37
Building Width [m] 25.1 8,611 mm 11 - 12 0.21 0.16 0.28 0.44
Avg. Roof Height [m] 6.3 12 - 13 0.28 0.13 0.22 0.46
1 23 4 5 67 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36
Enclosed? Enclosed 13 - 14 0.34 0.11 0.29 0.55
14 - 15 0.4 0.09 0.18 0.55
For complete job environment details, refer to the job
15 - 16 0.45 0.08 0.31 0.64
Enviroments Report.
16 - 17 0.5 0.06 0.16 0.63
37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 61/62 63/64 65/66 67/68 69/70 71/72 17 - 18 0.53 0.04 0.31 0.71
Load Summary 18 - 19 0.56 0.03 0.15 0.67
19 - 20 0.58 0.02 0.32 0.74
Load Value 20 - 21 0.6 0.01 0.13 0.68
Loaded Width (Actual) 403 Heel 348 mm BC 8,611 mm Heel 348 mm 21 - 22 0.6 0 0.32 0.75
Floor Dead Load (KPa) 0.63 22 - 23 0.6 0 0.14 0.68
Floor Live Load (KPa) 1.92 23 - 24 0.59 0 0.32 0.74
Floor Point Load (KPa) 1.80 24 - 25 0.58 0 0.15 0.68
Ceiling Dead Load (KPa) 0.15 25 - 26 0.55 0 0.31 0.7
Ceiling Live Load (KPa) 0.00 26 - 27 0.52 0 0.16 0.64
Ceiling Point Load (KPa) 1.10 27 - 28 0.48 0 0.3 0.63
28 - 29 0.43 0 0.18 0.58
29 - 30 0.38 0 0.29 0.54
Truss Summary 30 - 31 0.32 0 0.23 0.48
31 - 32 0.25 0 0.29 0.49
Item Value
32 - 33 0.16 0 0.28 0.41
Steel 6050-G550-0.95
33 - 34 0.09 0 0.22 0.29
Width [m] 8.6 Reactions 34 - 35 0.05 0 0.33 0.37
Height [m] 0.4 35 - 36 0 0 0.33 0.33
Loaded Width 403 Reaction @ Node 44 Reaction @ Node 71 Reaction @ Node 72 Bottom Chord
Purlin Spacing 250 Max. Ult 7,853 Max. Ult 19,858 Max. Ult -2,685 37 - 38 0 0 0.12 0.12
Batten Spacing 600 Min. Ult 1,445 Min. Ult 3,661 Min. Ult -14,549 38 - 39 0.04 0 0.16 0.17
BC Span [m] 8.6 39 - 40 0.09 0 0.16 0.23
Steel [m] 30.7 40 - 41 0.17 0 0.16 0.31
Weight [kg] 40.6 41 - 42 0.21 0 0.19 0.36
Max. Deflection Up 8.544 42 - 43 0.31 0 0.19 0.46
Max. Deflection Down -15.133 43 - 44 0.32 0 0.18 0.48
Max CR - Top Chord 0.75 44 - 45 0.35 0.03 0.18 0.5
Max CR - Bottom Chord 0.94 45 - 46 0.28 0.07 0.27 0.37
Status Pass 46 - 47 0.28 0.12 0.27 0.38
47 - 48 0.21 0.16 0.19 0.34
Nodes / Deflections 48 - 49 0.21 0.21 0.19 0.39
BC Deflections Summary 49 - 50 0.15 0.25 0.18 0.43
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 3.5 8.5 0.0 0.0 22 (5265, -34) -6.1 -15.1 0.0 0.0 43 (1515, -316) 0.2 0.4 0.0 0.0 50 - 51 0.15 0.3 0.18 0.47
Maximum Limit Ratio 51 - 52 0.1 0.33 0.15 0.49
2 (265, -34) 2.9 7.2 0.0 0.0 23 (5346, -34) -6.1 -15.0 0.0 0.0 44 (1596, -316) 0.0 0.0 0.0 0.0
Dead Load -6.14 12.00 0.51 52 - 53 0.09 0.37 0.15 0.52
3 (347, -34) 2.8 6.8 0.0 0.0 24 (5764, -34) -5.9 -14.4 0.0 0.0 45 (2015, -316) -1.1 -2.7 0.0 0.0
Live Load -15.13 27.95 0.54 53 - 54 0.06 0.39 0.13 0.52
4 (765, -34) 1.8 4.5 0.0 0.0 25 (5846, -34) -5.8 -14.2 0.0 0.0 46 (2096, -316) -1.3 -3.3 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0.05 0.41 0.16 0.54
5 (847, -34) 1.7 4.1 0.0 0.0 26 (6264, -34) -5.3 -13.0 0.0 0.0 47 (2515, -316) -2.4 -6.0 0.0 0.0
6 (1265, -34) 0.7 1.8 0.0 0.0 27 (6346, -34) -5.1 -12.7 0.0 0.0 48 (2596, -316) -2.7 -6.5 0.0 0.0 55 - 56 0.02 0.43 0.11 0.53
7 (1347, -34) 0.6 1.4 0.0 0.0 28 (6764, -34) -4.4 -10.9 0.0 0.0 49 (3015, -316) -3.6 -8.9 0.0 0.0 56 - 57 0.01 0.44 0.16 0.54
8 (1765, -34) -0.4 -1.0 0.0 0.0 29 (6846, -34) -4.2 -10.5 0.0 0.0 50 (3096, -316) -3.8 -9.4 0.0 0.0 57 - 58 0 0.44 0.09 0.51
9 (1847, -34) -0.7 -1.6 0.0 0.0 30 (7264, -34) -3.3 -8.2 0.0 0.0 51 (3515, -316) -4.7 -11.5 0.0 0.0 58 - 59 0 0.44 0.16 0.53
10 (2265, -34) -1.8 -4.4 0.0 0.0 31 (7346, -34) -3.1 -7.7 0.0 0.0 52 (3596, -316) -4.8 -11.8 0.0 0.0 59 - 60 0 0.43 0.11 0.52
11 (2346, -34) -2.0 -5.0 0.0 0.0 32 (7764, -34) -2.1 -5.1 0.0 0.0 53 (4015, -316) -5.4 -13.4 0.0 0.0 60 - 61 0 0.42 0.15 0.54
12 (2765, -34) -3.0 -7.5 0.0 0.0 33 (7846, -34) -1.8 -4.4 0.0 0.0 54 (4096, -316) -5.5 -13.7 0.0 0.0 61 - 62 0 0.4 0.13 0.52
13 (2846, -34) -3.3 -8.0 0.0 0.0 34 (8264, -34) -0.6 -1.6 0.0 0.0 55 (4515, -316) -5.9 -14.6 0.0 0.0 62 - 63 0 0.38 0.15 0.53
14 (3265, -34) -4.2 -10.3 0.0 0.0 35 (8346, -34) -0.4 -1.1 0.0 0.0 56 (4596, -316) -6.0 -14.8 0.0 0.0 63 - 64 0 0.35 0.15 0.5
15 (3346, -34) -4.3 -10.7 0.0 0.0 36 (8585, -34) 0.0 0.0 0.0 0.0 57 (5015, -316) -6.1 -15.1 0.0 0.0 64 - 65 0 0.32 0.17 0.49
16 (3765, -34) -5.1 -12.5 0.0 0.0 37 (26, -316) 3.5 8.5 0.0 0.0 58 (5096, -316) -6.1 -15.1 0.0 0.0 65 - 66 0 0.28 0.17 0.45
17 (3846, -34) -5.2 -12.8 0.0 0.0 38 (99, -316) 3.3 8.1 0.0 0.0 59 (5514, -316) -6.0 -14.8 0.0 0.0 66 - 67 0 0.24 0.18 0.42
18 (4265, -34) -5.7 -14.1 0.0 0.0 39 (515, -316) 2.4 5.9 0.0 0.0 60 (5596, -316) -6.0 -14.7 0.0 0.0 67 - 68 0 0.18 0.19 0.38
19 (4346, -34) -5.8 -14.3 0.0 0.0 40 (597, -316) 2.2 5.4 0.0 0.0 61 (6014, -316) -5.6 -13.8 0.0 0.0 68 - 69 0 0.12 0.36 0.48
20 (4765, -34) -6.1 -15.0 0.0 0.0 41 (1015, -316) 1.3 3.1 0.0 0.0 62 (6096, -316) -5.5 -13.5 0.0 0.0 69 - 70 0 0.06 0.36 0.42
21 (4846, -34) -6.1 -15.1 0.0 0.0 42 (1097, -316) 1.1 2.7 0.0 0.0 63 (6514, -316) -4.9 -12.0 0.0 0.0 70 - 71 0 0.04 0.9 0.94

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F11 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
71 - 72 0 0 0.9 0.9
Webs
37 - 1 0.04 0.01 0 0.04
72 - 36 0.02 0.03 0 0.03
38 - 2 0 0.06 0 0.07
3 - 39 0.11 0 0.01 0.12
40 - 4 0 0.12 0.01 0.12
5 - 41 0.12 0 0.01 0.13
42 - 6 0 0.13 0.01 0.13
7 - 43 0.11 0 0.01 0.11
44 - 8 0.16 0 0.01 0.17
9 - 45 0 0.16 0.01 0.16
46 - 10 0.18 0 0.01 0.19
11 - 47 0 0.16 0.01 0.17
48 - 12 0.15 0 0.01 0.16
13 - 49 0 0.12 0.01 0.13
50 - 14 0.12 0 0.01 0.12
15 - 51 0 0.1 0.01 0.1
52 - 16 0.09 0.01 0.01 0.09
17 - 53 0.01 0.08 0.01 0.09
54 - 18 0.07 0.02 0 0.07
19 - 55 0.03 0.07 0 0.07
56 - 20 0.06 0.04 0 0.06
21 - 57 0.04 0.05 0 0.05
58 - 22 0.04 0.05 0 0.06
23 - 59 0.06 0.04 0 0.06
60 - 24 0.03 0.07 0 0.07
25 - 61 0.07 0.02 0 0.08
62 - 26 0.01 0.08 0.01 0.09
27 - 63 0.09 0.01 0.01 0.09
64 - 28 0 0.1 0.01 0.1
29 - 65 0.11 0 0.01 0.11
66 - 30 0 0.11 0.01 0.12
31 - 67 0.14 0 0.01 0.15
68 - 32 0 0.16 0.01 0.17
33 - 69 0.16 0 0.01 0.17
70 - 34 0 0.08 0.01 0.08
35 - 71 0.1 0 0.01 0.11

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6596, -316) -4.7 -11.6 0.0 0.0
65 (7014, -316) -3.9 -9.6 0.0 0.0
66 (7096, -316) -3.7 -9.1 0.0 0.0
67 (7514, -316) -2.7 -6.7 0.0 0.0
68 (7596, -316) -2.5 -6.1 0.0 0.0
69 (8014, -316) -1.4 -3.4 0.0 0.0
70 (8095, -316) -1.1 -2.6 0.0 0.0
71 (8512, -316) 0.0 0.0 0.0 0.0
72 (8585, -316) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F12
Identical Trusses
Environment Truss F12
F12 F13 F14 F15
Site Data F16 F17 F18 F19
Elevation ASL [m] 10
Building Data 8 Identical Trusses
Wind Code AS/NZS 1170.2
Code AU Forces
Building Function A
Importance Level 2 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Wind 1:500 Top Chord
Annual prob. of exceed. - Snow 1:150 1-2 0 0 0.19 0.19
Roof Type Hip 2-3 0 0.02 0.21 0.2
Building Length [m] 19.8 3-4 0 0.07 0.24 0.26
Building Width [m] 25.1 8,611 mm 4-5 0 0.11 0.27 0.27
Avg. Roof Height [m] 6.3 5-6 0 0.15 0.27 0.31
1 23 4 5 67 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36 6-7 0 0.2 0.24 0.35
Enclosed? Enclosed
7-8 0 0.24 0.27 0.39
For complete job environment details, refer to the job 8-9 0.04 0.22 0.27 0.31
Enviroments Report. 9 - 10 0.09 0.2 0.26 0.33
10 - 11 0.16 0.18 0.26 0.38
37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 61/62 63/64 65/66 67/68 69/70 71/72 11 - 12 0.22 0.15 0.28 0.45
Load Summary 12 - 13 0.3 0.13 0.22 0.47
13 - 14 0.36 0.11 0.29 0.56
Load Value
14 - 15 0.43 0.09 0.19 0.58
Loaded Width (Actual) 406 Heel 348 mm BC 8,611 mm Heel 348 mm 15 - 16 0.48 0.07 0.31 0.66
Floor Dead Load (KPa) 0.63
16 - 17 0.53 0.06 0.17 0.67
Floor Live Load (KPa) 1.92 17 - 18 0.56 0.04 0.32 0.73
Floor Point Load (KPa) 1.80 18 - 19 0.6 0.03 0.16 0.72
Ceiling Dead Load (KPa) 0.15 19 - 20 0.62 0.02 0.32 0.77
Ceiling Live Load (KPa) 0.00 20 - 21 0.64 0.01 0.14 0.73
Ceiling Point Load (KPa) 1.10 21 - 22 0.65 0 0.33 0.79
22 - 23 0.65 0 0.14 0.73
Truss Summary 23 - 24 0.64 0 0.32 0.78
24 - 25 0.63 0 0.15 0.73
Item Value 25 - 26 0.61 0 0.32 0.74
Steel 6050-G550-0.95 26 - 27 0.58 0 0.16 0.71
27 - 28 0.54 0 0.31 0.69
Width [m] 8.6 Reactions 28 - 29 0.5 0 0.18 0.65
Height [m] 0.4
29 - 30 0.45 0 0.3 0.61
Loaded Width 406 Reaction @ Node 44 Reaction @ Node 71
30 - 31 0.39 0 0.21 0.55
Purlin Spacing 250 Max. Ult 8,066 Max. Ult 5,194
31 - 32 0.32 0 0.28 0.51
Batten Spacing 600 Min. Ult 1,484 Min. Ult 956
32 - 33 0.25 0 0.24 0.43
BC Span [m] 8.6
33 - 34 0.16 0 0.25 0.35
Steel [m] 30.7 34 - 35 0.09 0 0.28 0.33
Weight [kg] 40.6 35 - 36 0 0 0.28 0.28
Max. Deflection Up 9.323 Bottom Chord
Max. Deflection Down -16.491 37 - 38 0 0 0.12 0.12
Max CR - Top Chord 0.79 38 - 39 0.04 0 0.16 0.17
Max CR - Bottom Chord 0.58 39 - 40 0.09 0 0.16 0.23
Status Pass 40 - 41 0.17 0 0.16 0.31
Nodes / Deflections 41 - 42 0.21 0 0.19 0.36
42 - 43 0.31 0 0.19 0.46
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 43 - 44 0.32 0 0.18 0.48
Maximum Limit Ratio 1 (26, -34) 3.8 9.3 0.0 0.0 22 (5265, -34) -6.7 -16.5 0.0 0.0 43 (1515, -316) 0.2 0.5 0.0 0.0 44 - 45 0.35 0.03 0.18 0.5
2 (265, -34) 3.2 7.9 0.0 0.0 23 (5346, -34) -6.7 -16.4 0.0 0.0 44 (1596, -316) 0.0 0.0 0.0 0.0 45 - 46 0.28 0.07 0.28 0.37
Dead Load -6.70 23.33 0.29
3 (347, -34) 3.0 7.4 0.0 0.0 24 (5764, -34) -6.4 -15.8 0.0 0.0 45 (2015, -316) -1.2 -2.9 0.0 0.0 46 - 47 0.28 0.12 0.28 0.38
Live Load -16.49 28.00 0.59
4 (765, -34) 2.0 4.9 0.0 0.0 25 (5846, -34) -6.3 -15.6 0.0 0.0 46 (2096, -316) -1.5 -3.6 0.0 0.0 47 - 48 0.21 0.16 0.2 0.36
Dead Load 0.00 0.00 0.00
5 (847, -34) 1.8 4.4 0.0 0.0 26 (6264, -34) -5.8 -14.3 0.0 0.0 47 (2515, -316) -2.6 -6.5 0.0 0.0 48 - 49 0.21 0.22 0.2 0.42
6 (1265, -34) 0.8 2.0 0.0 0.0 27 (6346, -34) -5.7 -14.0 0.0 0.0 48 (2596, -316) -2.9 -7.0 0.0 0.0 49 - 50 0.15 0.27 0.19 0.45
7 (1347, -34) 0.6 1.5 0.0 0.0 28 (6764, -34) -4.9 -12.1 0.0 0.0 49 (3015, -316) -3.9 -9.7 0.0 0.0 50 - 51 0.14 0.31 0.19 0.5
8 (1765, -34) -0.5 -1.1 0.0 0.0 29 (6846, -34) -4.7 -11.6 0.0 0.0 50 (3096, -316) -4.1 -10.2 0.0 0.0 51 - 52 0.1 0.35 0.17 0.52
9 (1847, -34) -0.7 -1.8 0.0 0.0 30 (7264, -34) -3.7 -9.2 0.0 0.0 51 (3515, -316) -5.0 -12.4 0.0 0.0 52 - 53 0.09 0.39 0.17 0.55
10 (2265, -34) -1.9 -4.7 0.0 0.0 31 (7346, -34) -3.5 -8.6 0.0 0.0 52 (3596, -316) -5.2 -12.8 0.0 0.0 53 - 54 0.06 0.42 0.14 0.55
11 (2346, -34) -2.2 -5.3 0.0 0.0 32 (7764, -34) -2.3 -5.8 0.0 0.0 53 (4015, -316) -5.9 -14.5 0.0 0.0 54 - 55 0.05 0.44 0.16 0.58
12 (2765, -34) -3.3 -8.1 0.0 0.0 33 (7846, -34) -2.1 -5.1 0.0 0.0 54 (4096, -316) -6.0 -14.8 0.0 0.0 55 - 56 0.02 0.46 0.12 0.57
13 (2846, -34) -3.5 -8.7 0.0 0.0 34 (8264, -34) -0.8 -1.9 0.0 0.0 55 (4515, -316) -6.5 -15.9 0.0 0.0 56 - 57 0.01 0.47 0.16 0.58
14 (3265, -34) -4.5 -11.1 0.0 0.0 35 (8346, -34) -0.5 -1.3 0.0 0.0 56 (4596, -316) -6.5 -16.0 0.0 0.0 57 - 58 0 0.48 0.1 0.55
15 (3346, -34) -4.7 -11.6 0.0 0.0 36 (8585, -34) 0.2 0.6 0.0 0.0 57 (5015, -316) -6.7 -16.5 0.0 0.0 58 - 59 0 0.48 0.16 0.57
16 (3765, -34) -5.5 -13.5 0.0 0.0 37 (26, -316) 3.8 9.3 0.0 0.0 58 (5096, -316) -6.7 -16.5 0.0 0.0 59 - 60 0 0.47 0.11 0.56
17 (3846, -34) -5.6 -13.9 0.0 0.0 38 (99, -316) 3.6 8.9 0.0 0.0 59 (5514, -316) -6.6 -16.2 0.0 0.0 60 - 61 0 0.46 0.16 0.58
18 (4265, -34) -6.2 -15.3 0.0 0.0 39 (515, -316) 2.6 6.4 0.0 0.0 60 (5596, -316) -6.5 -16.1 0.0 0.0 61 - 62 0 0.45 0.13 0.57
19 (4346, -34) -6.3 -15.5 0.0 0.0 40 (597, -316) 2.4 5.9 0.0 0.0 61 (6014, -316) -6.2 -15.2 0.0 0.0 62 - 63 0 0.43 0.15 0.57
20 (4765, -34) -6.6 -16.3 0.0 0.0 41 (1015, -316) 1.4 3.4 0.0 0.0 62 (6096, -316) -6.0 -14.9 0.0 0.0 63 - 64 0 0.4 0.15 0.55
21 (4846, -34) -6.7 -16.4 0.0 0.0 42 (1097, -316) 1.2 3.0 0.0 0.0 63 (6514, -316) -5.4 -13.3 0.0 0.0 64 - 65 0 0.37 0.17 0.54

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F12 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
65 - 66 0 0.33 0.17 0.5
66 - 67 0 0.29 0.19 0.48
67 - 68 0 0.24 0.19 0.43
68 - 69 0 0.18 0.24 0.42
69 - 70 0 0.12 0.24 0.36
70 - 71 0 0.06 0.16 0.22
71 - 72 0 0 0.07 0.08
Webs
37 - 1 0.04 0.01 0 0.04
72 - 36 0.02 0.02 0 0.02
38 - 2 0 0.06 0 0.07
3 - 39 0.11 0 0.01 0.12
40 - 4 0 0.12 0.01 0.12
5 - 41 0.12 0 0.01 0.13
42 - 6 0 0.13 0.01 0.13
7 - 43 0.11 0 0.01 0.11
44 - 8 0.16 0 0.01 0.17
9 - 45 0 0.16 0.01 0.17
46 - 10 0.19 0 0.01 0.2
11 - 47 0 0.17 0.01 0.18
48 - 12 0.16 0 0.01 0.16
13 - 49 0 0.13 0.01 0.14
50 - 14 0.12 0 0.01 0.13
15 - 51 0 0.1 0.01 0.11
52 - 16 0.1 0.01 0.01 0.1
17 - 53 0.01 0.08 0.01 0.09
54 - 18 0.07 0.02 0 0.08
19 - 55 0.03 0.07 0 0.07
56 - 20 0.06 0.04 0 0.06
21 - 57 0.04 0.06 0 0.06
58 - 22 0.05 0.05 0 0.05
23 - 59 0.05 0.04 0 0.06
60 - 24 0.03 0.06 0 0.07
25 - 61 0.07 0.03 0 0.07
62 - 26 0.02 0.08 0.01 0.08
27 - 63 0.08 0.01 0.01 0.09
64 - 28 0 0.09 0.01 0.1
29 - 65 0.1 0 0.01 0.11
66 - 30 0 0.11 0.01 0.12
31 - 67 0.13 0 0.01 0.14
68 - 32 0 0.14 0.01 0.15
33 - 69 0.16 0 0.01 0.17
70 - 34 0 0.15 0.01 0.16
35 - 71 0.17 0 0.01 0.18

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6596, -316) -5.2 -12.9 0.0 0.0
65 (7014, -316) -4.4 -10.7 0.0 0.0
66 (7096, -316) -4.1 -10.2 0.0 0.0
67 (7514, -316) -3.1 -7.5 0.0 0.0
68 (7596, -316) -2.8 -6.9 0.0 0.0
69 (8014, -316) -1.6 -3.9 0.0 0.0
70 (8095, -316) -1.3 -3.2 0.0 0.0
71 (8512, -316) 0.0 0.0 0.0 0.0
72 (8585, -316) 0.2 0.6 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F20

Environment Truss F20 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0 0.02 0.21 0.19
Code AU 3-4 0 0.06 0.24 0.26
Building Function A 4-5 0 0.11 0.26 0.26
Importance Level 2 5-6 0 0.15 0.26 0.31
6-7 0 0.2 0.23 0.34
Annual prob. of exceed. - Wind 1:500
7-8 0 0.23 0.25 0.38
Annual prob. of exceed. - Snow 1:150
8-9 0.04 0.22 0.25 0.3
Roof Type Hip
9 - 10 0.09 0.21 0.25 0.31
Building Length [m] 19.8
10 - 11 0.16 0.18 0.24 0.36
Building Width [m] 25.1 8,611 mm 11 - 12 0.21 0.16 0.28 0.43
Avg. Roof Height [m] 6.3 12 - 13 0.26 0.14 0.21 0.44
1 23 4 5 67 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36
Enclosed? Enclosed 13 - 14 0.3 0.12 0.29 0.54
14 - 15 0.35 0.11 0.18 0.5
For complete job environment details, refer to the job
15 - 16 0.39 0.09 0.3 0.63
Enviroments Report.
16 - 17 0.43 0.08 0.16 0.54
37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 61/62 63/64 65/66 67/68 69/70 71/72 17 - 18 0.46 0.06 0.31 0.7
Load Summary 18 - 19 0.49 0.05 0.15 0.58
19 - 20 0.5 0.04 0.32 0.74
Load Value 20 - 21 0.52 0.03 0.14 0.6
Loaded Width (Actual) 330 Heel 348 mm BC 8,611 mm Heel 348 mm 21 - 22 0.52 0.02 0.32 0.75
Floor Dead Load (KPa) 0.63 22 - 23 0.53 0.01 0.13 0.59
Floor Live Load (KPa) 1.92 23 - 24 0.52 0 0.32 0.74
Floor Point Load (KPa) 1.80 24 - 25 0.51 0 0.15 0.6
Ceiling Dead Load (KPa) 0.15 25 - 26 0.49 0 0.31 0.71
Ceiling Live Load (KPa) 0.00 26 - 27 0.47 0 0.16 0.57
Ceiling Point Load (KPa) 1.10 27 - 28 0.44 0 0.31 0.65
28 - 29 0.41 0 0.17 0.53
29 - 30 0.36 0 0.29 0.56
Truss Summary 30 - 31 0.32 0 0.2 0.46
31 - 32 0.26 0 0.28 0.46
Item Value
32 - 33 0.2 0 0.23 0.38
Steel 6050-G550-0.95
33 - 34 0.13 0 0.25 0.33
Width [m] 8.6 Reactions 34 - 35 0.07 0 0.27 0.32
Height [m] 0.4 35 - 36 0 0 0.27 0.27
Loaded Width 330 Reaction @ Node 44 Reaction @ Node 71 Bottom Chord
Purlin Spacing 250 Max. Ult 6,556 Max. Ult 4,222 37 - 38 0 0 0.12 0.12
Batten Spacing 600 Min. Ult 1,206 Min. Ult 777 38 - 39 0.04 0 0.16 0.17
BC Span [m] 8.6 39 - 40 0.09 0 0.16 0.22
Steel [m] 30.7 40 - 41 0.17 0 0.16 0.31
Weight [kg] 40.6 41 - 42 0.21 0 0.18 0.35
Max. Deflection Up 7.578 42 - 43 0.31 0 0.19 0.45
Max. Deflection Down -13.404 43 - 44 0.32 0 0.18 0.47
Max CR - Top Chord 0.75 44 - 45 0.35 0.03 0.17 0.5
Max CR - Bottom Chord 0.50 45 - 46 0.28 0.07 0.23 0.36
Status Pass 46 - 47 0.29 0.12 0.23 0.38
47 - 48 0.22 0.15 0.16 0.31
Nodes / Deflections 48 - 49 0.22 0.19 0.16 0.34
BC Deflections Summary 49 - 50 0.17 0.22 0.15 0.37
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 3.1 7.6 0.0 0.0 22 (5265, -34) -5.4 -13.4 0.0 0.0 43 (1515, -316) 0.2 0.4 0.0 0.0 50 - 51 0.17 0.26 0.15 0.41
Maximum Limit Ratio 51 - 52 0.12 0.29 0.14 0.42
2 (265, -34) 2.6 6.4 0.0 0.0 23 (5346, -34) -5.4 -13.3 0.0 0.0 44 (1596, -316) 0.0 0.0 0.0 0.0
Dead Load -5.44 23.33 0.23 52 - 53 0.12 0.32 0.15 0.45
3 (347, -34) 2.4 6.0 0.0 0.0 24 (5764, -34) -5.2 -12.8 0.0 0.0 45 (2015, -316) -1.0 -2.4 0.0 0.0
Live Load -13.40 28.00 0.48 53 - 54 0.08 0.34 0.13 0.45
4 (765, -34) 1.6 4.0 0.0 0.0 25 (5846, -34) -5.2 -12.7 0.0 0.0 46 (2096, -316) -1.2 -2.9 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0.08 0.36 0.15 0.47
5 (847, -34) 1.5 3.6 0.0 0.0 26 (6264, -34) -4.7 -11.6 0.0 0.0 47 (2515, -316) -2.1 -5.2 0.0 0.0
6 (1265, -34) 0.6 1.6 0.0 0.0 27 (6346, -34) -4.6 -11.4 0.0 0.0 48 (2596, -316) -2.3 -5.7 0.0 0.0 55 - 56 0.05 0.37 0.11 0.46
7 (1347, -34) 0.5 1.2 0.0 0.0 28 (6764, -34) -4.0 -9.8 0.0 0.0 49 (3015, -316) -3.2 -7.8 0.0 0.0 56 - 57 0.04 0.38 0.15 0.47
8 (1765, -34) -0.4 -0.9 0.0 0.0 29 (6846, -34) -3.8 -9.4 0.0 0.0 50 (3096, -316) -3.4 -8.3 0.0 0.0 57 - 58 0.02 0.39 0.1 0.45
9 (1847, -34) -0.6 -1.4 0.0 0.0 30 (7264, -34) -3.0 -7.5 0.0 0.0 51 (3515, -316) -4.1 -10.1 0.0 0.0 58 - 59 0.01 0.39 0.16 0.46
10 (2265, -34) -1.6 -3.8 0.0 0.0 31 (7346, -34) -2.8 -7.0 0.0 0.0 52 (3596, -316) -4.2 -10.4 0.0 0.0 59 - 60 0 0.38 0.11 0.45
11 (2346, -34) -1.8 -4.3 0.0 0.0 32 (7764, -34) -1.9 -4.7 0.0 0.0 53 (4015, -316) -4.8 -11.8 0.0 0.0 60 - 61 0 0.38 0.15 0.47
12 (2765, -34) -2.7 -6.6 0.0 0.0 33 (7846, -34) -1.7 -4.2 0.0 0.0 54 (4096, -316) -4.9 -12.0 0.0 0.0 61 - 62 0 0.36 0.12 0.46
13 (2846, -34) -2.9 -7.0 0.0 0.0 34 (8264, -34) -0.6 -1.6 0.0 0.0 55 (4515, -316) -5.2 -12.9 0.0 0.0 62 - 63 0 0.35 0.15 0.47
14 (3265, -34) -3.7 -9.0 0.0 0.0 35 (8346, -34) -0.4 -1.0 0.0 0.0 56 (4596, -316) -5.3 -13.0 0.0 0.0 63 - 64 0 0.32 0.13 0.44
15 (3346, -34) -3.8 -9.4 0.0 0.0 36 (8585, -34) 0.2 0.5 0.0 0.0 57 (5015, -316) -5.4 -13.4 0.0 0.0 64 - 65 0 0.3 0.15 0.44
16 (3765, -34) -4.5 -11.0 0.0 0.0 37 (26, -316) 3.1 7.6 0.0 0.0 58 (5096, -316) -5.4 -13.4 0.0 0.0 65 - 66 0 0.27 0.14 0.41
17 (3846, -34) -4.6 -11.3 0.0 0.0 38 (99, -316) 2.9 7.2 0.0 0.0 59 (5514, -316) -5.4 -13.2 0.0 0.0 66 - 67 0 0.23 0.15 0.39
18 (4265, -34) -5.0 -12.4 0.0 0.0 39 (515, -316) 2.1 5.2 0.0 0.0 60 (5596, -316) -5.3 -13.1 0.0 0.0 67 - 68 0 0.19 0.15 0.35
19 (4346, -34) -5.1 -12.6 0.0 0.0 40 (597, -316) 2.0 4.8 0.0 0.0 61 (6014, -316) -5.0 -12.3 0.0 0.0 68 - 69 0 0.15 0.2 0.34
20 (4765, -34) -5.4 -13.2 0.0 0.0 41 (1015, -316) 1.1 2.8 0.0 0.0 62 (6096, -316) -4.9 -12.1 0.0 0.0 69 - 70 0 0.1 0.2 0.29
21 (4846, -34) -5.4 -13.3 0.0 0.0 42 (1097, -316) 1.0 2.4 0.0 0.0 63 (6514, -316) -4.4 -10.8 0.0 0.0 70 - 71 0 0.05 0.14 0.18

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F20 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
71 - 72 0 0 0.07 0.08
Webs
37 - 1 0.04 0.01 0 0.04
72 - 36 0.02 0.02 0 0.02
38 - 2 0 0.06 0 0.07
3 - 39 0.11 0 0.01 0.12
40 - 4 0 0.11 0.01 0.12
5 - 41 0.12 0 0.01 0.12
42 - 6 0 0.12 0.01 0.13
7 - 43 0.11 0 0.01 0.11
44 - 8 0.13 0 0.01 0.14
9 - 45 0 0.13 0.01 0.14
46 - 10 0.15 0 0.01 0.16
11 - 47 0 0.14 0.01 0.14
48 - 12 0.13 0 0.01 0.13
13 - 49 0 0.11 0.01 0.11
50 - 14 0.1 0 0.01 0.11
15 - 51 0 0.09 0.01 0.1
52 - 16 0.08 0.01 0.01 0.09
17 - 53 0.01 0.08 0.01 0.09
54 - 18 0.07 0.02 0 0.08
19 - 55 0.03 0.07 0 0.07
56 - 20 0.06 0.04 0 0.06
21 - 57 0.04 0.05 0 0.06
58 - 22 0.05 0.05 0 0.05
23 - 59 0.05 0.04 0 0.06
60 - 24 0.03 0.06 0 0.07
25 - 61 0.07 0.03 0 0.07
62 - 26 0.02 0.08 0 0.08
27 - 63 0.08 0.01 0.01 0.09
64 - 28 0.01 0.09 0.01 0.1
29 - 65 0.09 0 0.01 0.1
66 - 30 0 0.1 0.01 0.11
31 - 67 0.11 0 0.01 0.12
68 - 32 0 0.12 0.01 0.13
33 - 69 0.13 0 0.01 0.14
70 - 34 0 0.13 0.01 0.13
35 - 71 0.14 0 0.01 0.14

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6596, -316) -4.3 -10.5 0.0 0.0
65 (7014, -316) -3.5 -8.7 0.0 0.0
66 (7096, -316) -3.4 -8.3 0.0 0.0
67 (7514, -316) -2.5 -6.1 0.0 0.0
68 (7596, -316) -2.3 -5.6 0.0 0.0
69 (8014, -316) -1.3 -3.2 0.0 0.0
70 (8095, -316) -1.1 -2.6 0.0 0.0
71 (8512, -316) 0.0 0.0 0.0 0.0
72 (8585, -316) 0.2 0.4 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F21

Environment Truss F21 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0 0.02 0.21 0.19
Code AU 3-4 0 0.06 0.24 0.26
Building Function A 4-5 0 0.11 0.26 0.25
Importance Level 2 5-6 0 0.15 0.26 0.3
6-7 0 0.19 0.23 0.33
Annual prob. of exceed. - Wind 1:500
7-8 0 0.23 0.23 0.37
Annual prob. of exceed. - Snow 1:150
8-9 0.04 0.22 0.23 0.28
Roof Type Hip
9 - 10 0.09 0.21 0.25 0.3
Building Length [m] 19.8
10 - 11 0.15 0.19 0.22 0.34
Building Width [m] 25.1 8,611 mm 11 - 12 0.19 0.17 0.27 0.41
Avg. Roof Height [m] 6.3 12 - 13 0.24 0.16 0.2 0.41
1 23 4 5 67 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36
Enclosed? Enclosed 13 - 14 0.28 0.14 0.28 0.51
14 - 15 0.32 0.13 0.17 0.46
For complete job environment details, refer to the job
15 - 16 0.34 0.12 0.3 0.59
Enviroments Report.
16 - 17 0.37 0.1 0.15 0.49
37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 61/62 63/64 65/66 67/68 69/70 71/72 17 - 18 0.38 0.09 0.3 0.65
Load Summary 18 - 19 0.41 0.08 0.14 0.51
19 - 20 0.41 0.07 0.31 0.68
Load Value 20 - 21 0.43 0.06 0.13 0.53
Loaded Width (Actual) 206 Heel 348 mm BC 8,611 mm Heel 348 mm 21 - 22 0.42 0.05 0.31 0.69
Floor Dead Load (KPa) 0.63 22 - 23 0.44 0.04 0.12 0.53
Floor Live Load (KPa) 1.92 23 - 24 0.42 0.04 0.31 0.68
Floor Point Load (KPa) 1.80 24 - 25 0.42 0.03 0.14 0.51
Ceiling Dead Load (KPa) 0.15 25 - 26 0.39 0.02 0.3 0.65
Ceiling Live Load (KPa) 0.00 26 - 27 0.38 0.02 0.15 0.5
Ceiling Point Load (KPa) 1.10 27 - 28 0.35 0.01 0.3 0.6
28 - 29 0.33 0.01 0.16 0.46
29 - 30 0.29 0.01 0.29 0.52
Truss Summary 30 - 31 0.25 0 0.19 0.42
31 - 32 0.21 0 0.28 0.43
Item Value
32 - 33 0.16 0 0.22 0.35
Steel 6050-G550-0.95
33 - 34 0.11 0 0.25 0.32
Width [m] 8.6 Reactions 34 - 35 0.06 0 0.25 0.29
Height [m] 0.4 35 - 36 0 0 0.25 0.25
Loaded Width 206 Reaction @ Node 44 Reaction @ Node 71 Bottom Chord
Purlin Spacing 250 Max. Ult 4,093 Max. Ult 2,635 37 - 38 0 0 0.12 0.12
Batten Spacing 600 Min. Ult 753 Min. Ult 485 38 - 39 0.04 0 0.16 0.17
BC Span [m] 8.6 39 - 40 0.09 0 0.15 0.22
Steel [m] 30.7 40 - 41 0.17 0 0.16 0.3
Weight [kg] 40.6 41 - 42 0.2 0 0.18 0.34
Max. Deflection Up 4.730 42 - 43 0.3 0 0.18 0.44
Max. Deflection Down -8.367 43 - 44 0.31 0 0.17 0.45
Max CR - Top Chord 0.69 44 - 45 0.34 0.03 0.17 0.49
Max CR - Bottom Chord 0.49 45 - 46 0.28 0.07 0.16 0.34
Status Pass 46 - 47 0.3 0.11 0.16 0.38
47 - 48 0.24 0.14 0.14 0.32
Nodes / Deflections 48 - 49 0.25 0.18 0.13 0.32
BC Deflections Summary 49 - 50 0.2 0.2 0.13 0.33
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 1.9 4.7 0.0 0.0 22 (5265, -34) -3.4 -8.3 0.0 0.0 43 (1515, -316) 0.1 0.2 0.0 0.0 50 - 51 0.2 0.23 0.14 0.36
Maximum Limit Ratio 51 - 52 0.16 0.25 0.12 0.37
2 (265, -34) 1.6 4.0 0.0 0.0 23 (5346, -34) -3.4 -8.3 0.0 0.0 44 (1596, -316) 0.0 0.0 0.0 0.0
Dead Load -3.40 23.33 0.15 52 - 53 0.16 0.28 0.14 0.39
3 (347, -34) 1.5 3.8 0.0 0.0 24 (5764, -34) -3.3 -8.0 0.0 0.0 45 (2015, -316) -0.6 -1.5 0.0 0.0
Live Load -8.37 28.00 0.30 53 - 54 0.13 0.28 0.12 0.39
4 (765, -34) 1.0 2.5 0.0 0.0 25 (5846, -34) -3.2 -7.9 0.0 0.0 46 (2096, -316) -0.7 -1.8 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0.13 0.3 0.15 0.42
5 (847, -34) 0.9 2.3 0.0 0.0 26 (6264, -34) -3.0 -7.3 0.0 0.0 47 (2515, -316) -1.3 -3.3 0.0 0.0
6 (1265, -34) 0.4 1.0 0.0 0.0 27 (6346, -34) -2.9 -7.1 0.0 0.0 48 (2596, -316) -1.5 -3.6 0.0 0.0 55 - 56 0.1 0.3 0.1 0.4
7 (1347, -34) 0.3 0.8 0.0 0.0 28 (6764, -34) -2.5 -6.1 0.0 0.0 49 (3015, -316) -2.0 -4.9 0.0 0.0 56 - 57 0.1 0.32 0.15 0.42
8 (1765, -34) -0.2 -0.6 0.0 0.0 29 (6846, -34) -2.4 -5.9 0.0 0.0 50 (3096, -316) -2.1 -5.2 0.0 0.0 57 - 58 0.07 0.31 0.09 0.39
9 (1847, -34) -0.4 -0.9 0.0 0.0 30 (7264, -34) -1.9 -4.7 0.0 0.0 51 (3515, -316) -2.6 -6.3 0.0 0.0 58 - 59 0.07 0.32 0.15 0.42
10 (2265, -34) -1.0 -2.4 0.0 0.0 31 (7346, -34) -1.8 -4.4 0.0 0.0 52 (3596, -316) -2.6 -6.5 0.0 0.0 59 - 60 0.05 0.31 0.1 0.4
11 (2346, -34) -1.1 -2.7 0.0 0.0 32 (7764, -34) -1.2 -2.9 0.0 0.0 53 (4015, -316) -3.0 -7.4 0.0 0.0 60 - 61 0.05 0.31 0.15 0.42
12 (2765, -34) -1.7 -4.1 0.0 0.0 33 (7846, -34) -1.1 -2.6 0.0 0.0 54 (4096, -316) -3.0 -7.5 0.0 0.0 61 - 62 0.03 0.29 0.11 0.39
13 (2846, -34) -1.8 -4.4 0.0 0.0 34 (8264, -34) -0.4 -1.0 0.0 0.0 55 (4515, -316) -3.3 -8.1 0.0 0.0 62 - 63 0.03 0.28 0.15 0.4
14 (3265, -34) -2.3 -5.6 0.0 0.0 35 (8346, -34) -0.3 -0.6 0.0 0.0 56 (4596, -316) -3.3 -8.1 0.0 0.0 63 - 64 0.02 0.26 0.12 0.37
15 (3346, -34) -2.4 -5.9 0.0 0.0 36 (8585, -34) 0.1 0.3 0.0 0.0 57 (5015, -316) -3.4 -8.4 0.0 0.0 64 - 65 0.02 0.24 0.14 0.36
16 (3765, -34) -2.8 -6.9 0.0 0.0 37 (26, -316) 1.9 4.7 0.0 0.0 58 (5096, -316) -3.4 -8.4 0.0 0.0 65 - 66 0.01 0.21 0.13 0.33
17 (3846, -34) -2.9 -7.0 0.0 0.0 38 (99, -316) 1.8 4.5 0.0 0.0 59 (5514, -316) -3.3 -8.2 0.0 0.0 66 - 67 0.01 0.19 0.14 0.31
18 (4265, -34) -3.2 -7.8 0.0 0.0 39 (515, -316) 1.3 3.2 0.0 0.0 60 (5596, -316) -3.3 -8.2 0.0 0.0 67 - 68 0 0.15 0.14 0.29
19 (4346, -34) -3.2 -7.9 0.0 0.0 40 (597, -316) 1.2 3.0 0.0 0.0 61 (6014, -316) -3.1 -7.7 0.0 0.0 68 - 69 0 0.12 0.15 0.27
20 (4765, -34) -3.4 -8.3 0.0 0.0 41 (1015, -316) 0.7 1.7 0.0 0.0 62 (6096, -316) -3.1 -7.6 0.0 0.0 69 - 70 0 0.08 0.15 0.23
21 (4846, -34) -3.4 -8.3 0.0 0.0 42 (1097, -316) 0.6 1.5 0.0 0.0 63 (6514, -316) -2.7 -6.7 0.0 0.0 70 - 71 0 0.04 0.13 0.17

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F21 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
71 - 72 0 0 0.07 0.07
Webs
37 - 1 0.04 0.01 0 0.04
72 - 36 0.02 0.02 0 0.03
38 - 2 0 0.06 0 0.07
3 - 39 0.11 0 0.01 0.11
40 - 4 0 0.11 0.01 0.12
5 - 41 0.11 0 0.01 0.12
42 - 6 0 0.12 0.01 0.13
7 - 43 0.1 0.01 0.01 0.11
44 - 8 0.1 0 0.01 0.11
9 - 45 0 0.11 0.01 0.11
46 - 10 0.11 0 0.01 0.12
11 - 47 0 0.11 0.01 0.12
48 - 12 0.1 0 0.01 0.11
13 - 49 0 0.1 0.01 0.1
50 - 14 0.09 0.01 0.01 0.09
15 - 51 0.01 0.09 0.01 0.09
52 - 16 0.08 0.02 0 0.08
17 - 53 0.02 0.08 0 0.08
54 - 18 0.07 0.03 0 0.07
19 - 55 0.03 0.06 0 0.07
56 - 20 0.06 0.04 0 0.06
21 - 57 0.04 0.05 0 0.06
58 - 22 0.04 0.05 0 0.05
23 - 59 0.05 0.04 0 0.06
60 - 24 0.03 0.06 0 0.07
25 - 61 0.06 0.03 0 0.07
62 - 26 0.02 0.07 0 0.08
27 - 63 0.08 0.02 0 0.08
64 - 28 0.01 0.08 0.01 0.09
29 - 65 0.09 0.01 0.01 0.09
66 - 30 0.01 0.1 0.01 0.1
31 - 67 0.1 0.01 0.01 0.1
68 - 32 0 0.11 0.01 0.11
33 - 69 0.11 0 0.01 0.11
70 - 34 0 0.11 0.01 0.11
35 - 71 0.11 0 0.01 0.12

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6596, -316) -2.7 -6.5 0.0 0.0
65 (7014, -316) -2.2 -5.4 0.0 0.0
66 (7096, -316) -2.1 -5.2 0.0 0.0
67 (7514, -316) -1.6 -3.8 0.0 0.0
68 (7596, -316) -1.4 -3.5 0.0 0.0
69 (8014, -316) -0.8 -2.0 0.0 0.0
70 (8095, -316) -0.7 -1.6 0.0 0.0
71 (8512, -316) 0.0 0.0 0.0 0.0
72 (8585, -316) 0.1 0.3 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F22

Environment Truss F22 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.16 0.16
Wind Code AS/NZS 1170.2 2-3 0 0.02 0.21 0.2
Code AU 3-4 0 0.05 0.21 0.23
Building Function A 4-5 0 0.08 0.23 0.24
Importance Level 2 5-6 0 0.12 0.23 0.27
6-7 0 0.15 0.24 0.33
Annual prob. of exceed. - Wind 1:500
7-8 0 0.18 0.24 0.37
Annual prob. of exceed. - Snow 1:150
8-9 0 0.22 0.22 0.37
Roof Type Hip
9 - 10 0 0.25 0.27 0.44
Building Length [m] 19.8
10 - 11 0 0.23 0.35 0.47
Building Width [m] 25.1 8,549 mm
11 - 12 0 0.22 0.35 0.53
Avg. Roof Height [m] 6.3 12 - 13 0 0.26 0.38 0.57
1 23 45 6 7 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36/37 38/39 40/41 42/43 44/45 46
Enclosed? Enclosed 13 - 14 0 0.31 0.38 0.62
14 - 15 0 0.26 0.31 0.51
For complete job environment details, refer to the job
15 - 16 0 0.21 0.34 0.49
Enviroments Report.
16 - 17 0 0.15 0.34 0.43
47/48 49/50 51/52 53/54 55/56 57/58 59/60 61/62 63/64 65/66 67/68 69/70 71/72 73/74 75/76 77/78 79/80 81/82 83/84 85/86 87/88 89/90 91/92 17 - 18 0.02 0.09 0.3 0.35
Load Summary 18 - 19 0.06 0.06 0.3 0.3
19 - 20 0.09 0.04 0.24 0.28
Load Value 20 - 21 0.13 0.03 0.24 0.32
Loaded Width (Actual) 439 21 - 22 0.15 0.02 0.23 0.35
Heel 348 mm BC 8,549 mm Heel 348 mm
Floor Dead Load (KPa) 0.63 22 - 23 0.2 0.01 0.2 0.36
Floor Live Load (KPa) 1.92 23 - 24 0.23 0 0.24 0.42
Floor Point Load (KPa) 1.80 24 - 25 0.27 0 0.17 0.41
Ceiling Dead Load (KPa) 0.15 25 - 26 0.31 0 0.24 0.47
Ceiling Live Load (KPa) 0.00 26 - 27 0.34 0 0.15 0.46
Ceiling Point Load (KPa) 1.10 27 - 28 0.37 0 0.25 0.52
28 - 29 0.39 0 0.14 0.49
29 - 30 0.41 0 0.26 0.55
Truss Summary 30 - 31 0.42 0 0.13 0.5
31 - 32 0.43 0 0.26 0.57
Item Value
32 - 33 0.43 0 0.11 0.48
Steel 6050-G550-0.95
33 - 34 0.43 0 0.26 0.57
Width [m] 8.5 Reactions 34 - 35 0.42 0 0.12 0.5
Height [m] 0.4 35 - 36 0.41 0 0.26 0.55
Loaded Width 439 Reaction @ Node 56 Reaction @ Node 60 Reaction @ Node 92 36 - 37 0.39 0 0.14 0.49
Purlin Spacing 250 Max. Ult -520 Max. Ult 12,746 Max. Ult 4,313 37 - 38 0.37 0 0.25 0.51
Batten Spacing 600 Min. Ult -2,824 Min. Ult 2,345 Min. Ult 793 38 - 39 0.34 0 0.15 0.46
BC Span [m] 8.5 39 - 40 0.31 0 0.24 0.45
Steel [m] 33.5 40 - 41 0.27 0 0.17 0.41
Weight [kg] 44.3 41 - 42 0.23 0 0.23 0.37
Max. Deflection Up 0.433 42 - 43 0.18 0 0.22 0.35
Max. Deflection Down -8.662 43 - 44 0.13 0 0.27 0.37
Max CR - Top Chord 0.62 44 - 45 0.06 0 0.27 0.32
Max CR - Bottom Chord 0.70 45 - 46 0 0 0.21 0.21
Bottom Chord
Status Pass
47 - 48 0 0 0.13 0.13
Nodes / Deflections 48 - 49 0.03 0 0.16 0.18
BC Deflections Summary 49 - 50 0.07 0 0.16 0.22
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.2 0.4 0.0 0.0 22 (3963, -34) -2.3 -5.7 0.0 0.0 43 (7948, -34) -1.2 -2.9 0.0 0.0 50 - 51 0.11 0 0.16 0.25
Maximum Limit Ratio 51 - 52 0.16 0 0.19 0.31
2 (206, -34) 0.2 0.4 0.0 0.0 23 (4043, -34) -2.4 -6.0 0.0 0.0 44 (8258, -34) -0.6 -1.4 0.0 0.0
Dead Load -3.52 23.10 0.15 52 - 53 0.2 0 0.19 0.36
3 (286, -34) 0.1 0.3 0.0 0.0 24 (4354, -34) -2.8 -6.8 0.0 0.0 45 (8338, -34) -0.4 -1.0 0.0 0.0
Live Load -8.66 27.72 0.31 53 - 54 0.25 0 0.19 0.41
4 (586, -34) 0.1 0.3 0.0 0.0 25 (4434, -34) -2.9 -7.1 0.0 0.0 46 (8523, -34) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0.3 0 0.19 0.46
5 (666, -34) 0.1 0.2 0.0 0.0 26 (4744, -34) -3.1 -7.7 0.0 0.0 47 (26, -316) 0.2 0.4 0.0 0.0
6 (966, -34) 0.1 0.2 0.0 0.0 27 (4824, -34) -3.2 -7.9 0.0 0.0 48 (98, -316) 0.2 0.4 0.0 0.0 55 - 56 0.34 0 0.21 0.52
7 (1046, -34) 0.1 0.2 0.0 0.0 28 (5135, -34) -3.4 -8.4 0.0 0.0 49 (396, -316) 0.1 0.3 0.0 0.0 56 - 57 0.31 0 0.35 0.54
8 (1348, -34) 0.0 0.1 0.0 0.0 29 (5215, -34) -3.4 -8.5 0.0 0.0 50 (476, -316) 0.1 0.3 0.0 0.0 57 - 58 0.29 0 0.36 0.6
9 (1427, -34) 0.0 0.1 0.0 0.0 30 (5525, -34) -3.5 -8.6 0.0 0.0 51 (776, -316) 0.1 0.2 0.0 0.0 58 - 59 0.35 0 0.37 0.67
10 (1734, -34) 0.0 0.0 0.0 0.0 31 (5605, -34) -3.5 -8.7 0.0 0.0 52 (856, -316) 0.1 0.2 0.0 0.0 59 - 60 0.42 0 0.33 0.7
11 (1811, -34) 0.0 0.0 0.0 0.0 B+S 32 (5915, -34) -3.5 -8.6 0.0 0.0 53 (1156, -316) 0.1 0.1 0.0 0.0 60 - 61 0.36 0 0.33 0.64
12 (2011, -34) 0.0 0.1 0.0 0.0 B+S 33 (5995, -34) -3.5 -8.5 0.0 0.0 54 (1236, -316) 0.0 0.1 0.0 0.0 61 - 62 0.29 0 0.38 0.61
13 (2088, -34) 0.0 0.1 0.0 0.0 34 (6306, -34) -3.3 -8.2 0.0 0.0 55 (1568, -316) 0.0 0.0 0.0 0.0 62 - 63 0.21 0 0.38 0.54
14 (2400, -34) -0.1 -0.3 0.0 0.0 35 (6386, -34) -3.3 -8.0 0.0 0.0 56 (1645, -316) 0.0 0.0 0.0 0.0 63 - 64 0.13 0.01 0.28 0.37
15 (2480, -34) -0.2 -0.6 0.0 0.0 36 (6696, -34) -3.0 -7.4 0.0 0.0 57 (1873, -316) 0.0 0.0 0.0 0.0 B+S 64 - 65 0.08 0.05 0.26 0.3
16 (2792, -34) -0.6 -1.6 0.0 0.0 37 (6776, -34) -2.9 -7.2 0.0 0.0 58 (1949, -316) 0.0 0.1 0.0 0.0 B+S 65 - 66 0.06 0.07 0.21 0.24
17 (2872, -34) -0.8 -1.9 0.0 0.0 38 (7087, -34) -2.6 -6.3 0.0 0.0 59 (2177, -316) 0.0 0.0 0.0 0.0 66 - 67 0.04 0.1 0.2 0.26
18 (3182, -34) -1.2 -3.0 0.0 0.0 39 (7167, -34) -2.4 -6.0 0.0 0.0 60 (2254, -316) 0.0 0.0 0.0 0.0 67 - 68 0.02 0.11 0.19 0.28
19 (3262, -34) -1.3 -3.3 0.0 0.0 40 (7477, -34) -2.0 -4.9 0.0 0.0 61 (2596, -316) -0.4 -0.9 0.0 0.0 68 - 69 0.01 0.14 0.19 0.32
20 (3573, -34) -1.8 -4.4 0.0 0.0 41 (7557, -34) -1.9 -4.6 0.0 0.0 62 (2676, -316) -0.5 -1.2 0.0 0.0 69 - 70 0 0.17 0.16 0.33
21 (3653, -34) -1.9 -4.7 0.0 0.0 42 (7868, -34) -1.3 -3.3 0.0 0.0 63 (2987, -316) -0.9 -2.3 0.0 0.0 70 - 71 0 0.2 0.16 0.37

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F22 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
71 - 72 0 0.23 0.14 0.37
72 - 73 0 0.25 0.14 0.4
73 - 74 0 0.27 0.13 0.39
74 - 75 0 0.29 0.13 0.41
75 - 76 0 0.3 0.11 0.39
76 - 77 0 0.31 0.13 0.4
77 - 78 0 0.32 0.09 0.38
78 - 79 0 0.32 0.13 0.38
79 - 80 0 0.32 0.09 0.38
80 - 81 0 0.31 0.13 0.4
81 - 82 0 0.3 0.11 0.39
82 - 83 0 0.29 0.12 0.41
83 - 84 0 0.27 0.12 0.39
84 - 85 0 0.25 0.14 0.4
85 - 86 0 0.23 0.14 0.37
86 - 87 0 0.2 0.16 0.36
87 - 88 0 0.17 0.16 0.33
88 - 89 0 0.13 0.19 0.32
89 - 90 0 0.09 0.2 0.29
90 - 91 0 0.05 0.34 0.38
91 - 92 0 0 0.34 0.41
Webs
47 - 1 0.04 0 0 0.05
92 - 46 0.02 0.02 0 0.03
48 - 2 0 0.07 0 0.08
3 - 49 0.12 0 0.01 0.13
50 - 4 0 0.12 0.01 0.13
5 - 51 0.12 0 0.01 0.13
52 - 6 0 0.13 0.01 0.14
7 - 53 0.13 0 0.01 0.14
54 - 8 0 0.13 0.01 0.14
9 - 55 0.12 0 0.01 0.13
56 - 10 0.09 0.21 0.01 0.22
11 - 57 0.26 0.12 0.02 0.27
58 - 12 0.16 0.27 0.02 0.28
13 - 59 0.22 0.15 0.01 0.23
60 - 14 0.14 0 0.01 0.15
15 - 61 0 0.16 0.01 0.17
62 - 16 0.22 0 0.01 0.23
17 - 63 0 0.21 0.01 0.22
64 - 18 0.2 0 0.01 0.21
19 - 65 0 0.17 0.01 0.18
66 - 20 0.17 0 0.01 0.18
21 - 67 0 0.15 0.01 0.16
68 - 22 0.14 0 0.01 0.15
23 - 69 0 0.12 0.01 0.13
70 - 24 0.11 0 0.01 0.12
25 - 71 0 0.11 0.01 0.11
Nodes / Deflections 72 - 26 0.09 0.01 0.01 0.1
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 27 - 73 0.01 0.09 0.01 0.1
64 (3067, -316) -1.1 -2.6 0.0 0.0 85 (7282, -316) -2.3 -5.6 0.0 0.0 74 - 28 0.08 0.02 0.01 0.08
65 (3377, -316) -1.5 -3.7 0.0 0.0 86 (7362, -316) -2.2 -5.3 0.0 0.0 29 - 75 0.02 0.08 0 0.08
66 (3457, -316) -1.6 -4.0 0.0 0.0 87 (7672, -316) -1.7 -4.1 0.0 0.0 76 - 30 0.07 0.03 0 0.07
67 (3768, -316) -2.0 -5.0 0.0 0.0 88 (7752, -316) -1.5 -3.7 0.0 0.0 31 - 77 0.03 0.06 0 0.07
68 (3848, -316) -2.2 -5.3 0.0 0.0 89 (8063, -316) -1.0 -2.4 0.0 0.0 78 - 32 0.05 0.04 0 0.05
69 (4158, -316) -2.6 -6.3 0.0 0.0 90 (8143, -316) -0.8 -2.0 0.0 0.0 33 - 79 0.05 0.05 0 0.05
70 (4238, -316) -2.7 -6.5 0.0 0.0 91 (8451, -316) -0.2 -0.5 0.0 0.0 80 - 34 0.04 0.06 0 0.06
71 (4549, -316) -3.0 -7.3 0.0 0.0 92 (8523, -316) 0.0 0.0 0.0 0.0 35 - 81 0.06 0.03 0 0.06
72 (4629, -316) -3.1 -7.5 0.0 0.0 82 - 36 0.02 0.07 0 0.08
73 (4939, -316) -3.3 -8.1 0.0 0.0 37 - 83 0.08 0.02 0 0.08
74 (5019, -316) -3.3 -8.2 0.0 0.0 84 - 38 0.01 0.09 0.01 0.09
75 (5330, -316) -3.5 -8.5 0.0 0.0 39 - 85 0.09 0 0.01 0.1
76 (5410, -316) -3.5 -8.6 0.0 0.0 86 - 40 0 0.1 0.01 0.11
77 (5720, -316) -3.5 -8.7 0.0 0.0 41 - 87 0.11 0 0.01 0.12
78 (5800, -316) -3.5 -8.6 0.0 0.0 88 - 42 0 0.12 0.01 0.13
79 (6111, -316) -3.4 -8.4 0.0 0.0 43 - 89 0.15 0 0.01 0.16
80 (6191, -316) -3.4 -8.3 0.0 0.0 90 - 44 0 0.17 0.01 0.18
81 (6501, -316) -3.2 -7.8 0.0 0.0 45 - 91 0.17 0 0.01 0.18
82 (6581, -316) -3.1 -7.7 0.0 0.0
83 (6891, -316) -2.8 -6.9 0.0 0.0
84 (6971, -316) -2.7 -6.6 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F23
Identical Trusses
Environment Truss F23
F23 F24 F25 F26
Site Data F27 F28 F29 F30
Elevation ASL [m] 10
Building Data 8 Identical Trusses
Wind Code AS/NZS 1170.2
Code AU Forces
Building Function A
Importance Level 2 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Wind 1:500 Top Chord
Annual prob. of exceed. - Snow 1:150 1-2 0 0 0.19 0.19
Roof Type Hip 2-3 0 0.02 0.21 0.2
Building Length [m] 19.8 3-4 0 0.07 0.24 0.26
Building Width [m] 25.1 8,549 mm 4-5 0 0.11 0.26 0.26
Avg. Roof Height [m] 6.3 5-6 0 0.15 0.26 0.3
1 23 4 5 6 7 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36 6-7 0 0.19 0.29 0.39
Enclosed? Enclosed
7-8 0 0.24 0.29 0.43
For complete job environment details, refer to the job 8-9 0 0.3 0.25 0.48
Enviroments Report. 9 - 10 0 0.34 0.25 0.52
10 - 11 0 0.34 0.23 0.42
37/38 39/40 41/42 43/44 45/46/47 48/49 50/51 52/53 54/55 56/57 58/59 60/61 62/63 64/65 66/67 68/69 70/71 72/73 11 - 12 0.02 0.34 0.26 0.47
Load Summary 12 - 13 0.09 0.31 0.26 0.44
13 - 14 0.15 0.28 0.28 0.41
Load Value
14 - 15 0.21 0.25 0.24 0.41
Loaded Width (Actual) 406
Heel 348 mm BC 8,549 mm Heel 348 mm 15 - 16 0.25 0.22 0.28 0.48
Floor Dead Load (KPa) 0.63
16 - 17 0.3 0.2 0.19 0.46
Floor Live Load (KPa) 1.92 17 - 18 0.33 0.18 0.3 0.58
Floor Point Load (KPa) 1.80 18 - 19 0.37 0.16 0.16 0.5
Ceiling Dead Load (KPa) 0.15 19 - 20 0.38 0.14 0.3 0.64
Ceiling Live Load (KPa) 0.00 20 - 21 0.41 0.12 0.14 0.52
Ceiling Point Load (KPa) 1.10 21 - 22 0.43 0.1 0.31 0.68
22 - 23 0.45 0.08 0.13 0.53
Truss Summary 23 - 24 0.46 0.07 0.31 0.69
24 - 25 0.47 0.06 0.12 0.53
Item Value 25 - 26 0.46 0.04 0.31 0.68
Steel 6050-G550-0.95 26 - 27 0.45 0.03 0.14 0.52
27 - 28 0.43 0.03 0.3 0.64
Width [m] 8.5 Reactions 28 - 29 0.4 0.02 0.16 0.5
Height [m] 0.4
29 - 30 0.37 0.01 0.29 0.57
Loaded Width 406 Reaction @ Node 47 Reaction @ Node 73
30 - 31 0.33 0.01 0.19 0.45
Purlin Spacing 250 Max. Ult 8,868 Max. Ult 4,297
31 - 32 0.28 0 0.28 0.46
Batten Spacing 600 Min. Ult 1,631 Min. Ult 790
32 - 33 0.23 0 0.24 0.4
BC Span [m] 8.5
33 - 34 0.16 0 0.28 0.37
Steel [m] 30.6 34 - 35 0.08 0 0.25 0.3
Weight [kg] 40.4 35 - 36 0 0 0.25 0.25
Max. Deflection Up 4.102 Bottom Chord
Max. Deflection Down -9.862 37 - 38 0 0 0.12 0.12
Max CR - Top Chord 0.69 38 - 39 0.04 0 0.16 0.17
Max CR - Bottom Chord 0.92 39 - 40 0.09 0 0.16 0.23
Status Pass 40 - 41 0.17 0 0.16 0.31
Nodes / Deflections 41 - 42 0.21 0 0.19 0.35
42 - 43 0.3 0 0.19 0.45
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 43 - 44 0.33 0 0.23 0.53
Maximum Limit Ratio 1 (26, -34) 1.7 4.1 0.0 0.0 22 (5227, -34) -4.0 -9.8 0.0 0.0 43 (1504, -316) 0.5 1.2 0.0 0.0 44 - 45 0.46 0 0.38 0.71
2 (263, -34) 1.5 3.6 0.0 0.0 23 (5308, -34) -4.0 -9.8 0.0 0.0 44 (1586, -316) 0.4 1.0 0.0 0.0 45 - 46 0.47 0 0.38 0.71
Dead Load -4.01 22.27 0.18
3 (345, -34) 1.4 3.5 0.0 0.0 24 (5723, -34) -4.0 -9.8 0.0 0.0 45 (2001, -316) 0.0 0.1 0.0 0.0 46 - 47 0.46 0 0.7 0.92
Live Load -9.86 26.72 0.37
4 (760, -34) 1.1 2.6 0.0 0.0 25 (5804, -34) -4.0 -9.8 0.0 0.0 46 (2082, -316) 0.0 0.1 0.0 0.0 47 - 48 0.46 0 0.7 0.92
Dead Load 0.00 0.00 0.00
5 (841, -34) 1.0 2.5 0.0 0.0 26 (6219, -34) -3.8 -9.2 0.0 0.0 47 (2216, -316) 0.0 0.0 0.0 0.0 48 - 49 0.46 0.01 0.46 0.62
6 (1256, -34) 0.7 1.7 0.0 0.0 27 (6301, -34) -3.7 -9.1 0.0 0.0 48 (2497, -316) -0.5 -1.3 0.0 0.0 49 - 50 0.48 0.06 0.46 0.65
7 (1338, -34) 0.6 1.5 0.0 0.0 28 (6716, -34) -3.3 -8.1 0.0 0.0 49 (2578, -316) -0.7 -1.8 0.0 0.0 50 - 51 0.37 0.11 0.23 0.52
8 (1752, -34) 0.3 0.6 0.0 0.0 29 (6797, -34) -3.2 -7.8 0.0 0.0 50 (2993, -316) -1.4 -3.5 0.0 0.0 51 - 52 0.39 0.15 0.17 0.5
9 (1834, -34) 0.2 0.5 0.0 0.0 30 (7212, -34) -2.6 -6.4 0.0 0.0 51 (3075, -316) -1.6 -3.9 0.0 0.0 52 - 53 0.3 0.18 0.17 0.41
10 (2249, -34) -0.2 -0.5 0.0 0.0 31 (7293, -34) -2.5 -6.1 0.0 0.0 52 (3489, -316) -2.2 -5.5 0.0 0.0 53 - 54 0.31 0.22 0.17 0.41
11 (2330, -34) -0.3 -0.8 0.0 0.0 32 (7708, -34) -1.7 -4.3 0.0 0.0 53 (3571, -316) -2.4 -5.8 0.0 0.0 54 - 55 0.24 0.24 0.15 0.37
12 (2745, -34) -1.0 -2.5 0.0 0.0 33 (7790, -34) -1.6 -3.9 0.0 0.0 54 (3986, -316) -2.9 -7.3 0.0 0.0 55 - 56 0.24 0.27 0.15 0.4
13 (2826, -34) -1.2 -2.9 0.0 0.0 34 (8204, -34) -0.7 -1.8 0.0 0.0 55 (4067, -316) -3.1 -7.5 0.0 0.0 56 - 57 0.19 0.28 0.12 0.4
14 (3241, -34) -1.8 -4.5 0.0 0.0 35 (8286, -34) -0.5 -1.3 0.0 0.0 56 (4482, -316) -3.5 -8.6 0.0 0.0 57 - 58 0.18 0.3 0.15 0.42
15 (3323, -34) -2.0 -4.9 0.0 0.0 36 (8523, -34) 0.0 0.0 0.0 0.0 57 (4564, -316) -3.6 -8.8 0.0 0.0 58 - 59 0.14 0.32 0.11 0.41
16 (3738, -34) -2.6 -6.4 0.0 0.0 37 (26, -316) 1.7 4.1 0.0 0.0 58 (4978, -316) -3.9 -9.5 0.0 0.0 59 - 60 0.13 0.33 0.15 0.43
17 (3819, -34) -2.7 -6.7 0.0 0.0 38 (99, -316) 1.6 4.0 0.0 0.0 59 (5060, -316) -3.9 -9.6 0.0 0.0 60 - 61 0.1 0.34 0.09 0.4
18 (4234, -34) -3.2 -8.0 0.0 0.0 39 (512, -316) 1.3 3.1 0.0 0.0 60 (5475, -316) -4.0 -9.9 0.0 0.0 61 - 62 0.09 0.34 0.15 0.42
19 (4315, -34) -3.3 -8.2 0.0 0.0 40 (593, -316) 1.2 3.0 0.0 0.0 61 (5556, -316) -4.0 -9.9 0.0 0.0 62 - 63 0.06 0.34 0.1 0.4
20 (4730, -34) -3.7 -9.1 0.0 0.0 41 (1008, -316) 0.9 2.2 0.0 0.0 62 (5971, -316) -3.9 -9.6 0.0 0.0 63 - 64 0.05 0.33 0.15 0.43
21 (4812, -34) -3.8 -9.3 0.0 0.0 42 (1089, -316) 0.8 2.0 0.0 0.0 63 (6052, -316) -3.9 -9.5 0.0 0.0 64 - 65 0.03 0.32 0.12 0.41

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F23 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
65 - 66 0.03 0.3 0.15 0.42
66 - 67 0.01 0.27 0.13 0.39
67 - 68 0.01 0.24 0.15 0.39
68 - 69 0 0.2 0.15 0.35
69 - 70 0 0.17 0.16 0.32
70 - 71 0 0.12 0.18 0.3
71 - 72 0 0.06 0.32 0.38
72 - 73 0 0 0.32 0.39
Webs
37 - 1 0.04 0.01 0 0.04
73 - 36 0.03 0.02 0 0.03
38 - 2 0 0.06 0 0.07
3 - 39 0.11 0 0.01 0.12
40 - 4 0 0.12 0.01 0.12
5 - 41 0.12 0 0.01 0.12
42 - 6 0 0.12 0.01 0.13
7 - 43 0.13 0 0.01 0.14
44 - 8 0 0.15 0.01 0.16
9 - 45 0.13 0 0.01 0.14
46 - 10 0.09 0.02 0.01 0.09
11 - 48 0.01 0.09 0.01 0.09
49 - 12 0.19 0 0.01 0.2
13 - 50 0 0.18 0.01 0.19
51 - 14 0.16 0 0.01 0.17
15 - 52 0 0.13 0.01 0.14
53 - 16 0.13 0 0.01 0.13
17 - 54 0 0.11 0.01 0.11
55 - 18 0.1 0 0.01 0.1
19 - 56 0.01 0.08 0.01 0.09
57 - 20 0.07 0.02 0 0.08
21 - 58 0.03 0.07 0 0.07
59 - 22 0.06 0.04 0 0.06
23 - 60 0.04 0.05 0 0.06
61 - 24 0.04 0.05 0 0.05
25 - 62 0.06 0.04 0 0.06
63 - 26 0.03 0.07 0 0.07
27 - 64 0.07 0.02 0 0.08
65 - 28 0.02 0.08 0.01 0.09
29 - 66 0.09 0.02 0.01 0.09
67 - 30 0.01 0.1 0.01 0.1
31 - 68 0.1 0.01 0.01 0.11
69 - 32 0.01 0.11 0.01 0.12
33 - 70 0.13 0 0.01 0.14
71 - 34 0 0.15 0.01 0.16
35 - 72 0.16 0 0.01 0.17

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6467, -316) -3.5 -8.7 0.0 0.0
65 (6549, -316) -3.5 -8.5 0.0 0.0
66 (6964, -316) -3.0 -7.3 0.0 0.0
67 (7045, -316) -2.8 -7.0 0.0 0.0
68 (7460, -316) -2.2 -5.4 0.0 0.0
69 (7541, -316) -2.0 -5.0 0.0 0.0
70 (7956, -316) -1.3 -3.1 0.0 0.0
71 (8038, -316) -1.1 -2.6 0.0 0.0
72 (8451, -316) -0.2 -0.5 0.0 0.0
73 (8523, -316) 0.0 0.0 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F31

Environment Truss F31 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0 0.02 0.21 0.19
Code AU 3-4 0 0.06 0.24 0.26
Building Function A 4-5 0 0.11 0.25 0.25
Importance Level 2 5-6 0 0.15 0.25 0.29
6-7 0 0.19 0.27 0.37
Annual prob. of exceed. - Wind 1:500
7-8 0 0.24 0.27 0.42
Annual prob. of exceed. - Snow 1:150
8-9 0 0.29 0.25 0.46
Roof Type Hip
9 - 10 0 0.33 0.25 0.5
Building Length [m] 19.8
10 - 11 0 0.33 0.21 0.4
Building Width [m] 25.1 8,549 mm
11 - 12 0.03 0.33 0.23 0.44
Avg. Roof Height [m] 6.3 12 - 13 0.09 0.3 0.23 0.42
1 23 4 5 6 7 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36
Enclosed? Enclosed 13 - 14 0.14 0.28 0.27 0.4
14 - 15 0.2 0.25 0.22 0.39
For complete job environment details, refer to the job
15 - 16 0.24 0.23 0.27 0.46
Enviroments Report.
16 - 17 0.28 0.21 0.18 0.43
37/38 39/40 41/42 43/44 45/46/47 48/49 50/51 52/53 54/55 56/57 58/59 60/61 62/63 64/65 66/67 68/69 70/71 72/73 17 - 18 0.3 0.19 0.29 0.55
Load Summary 18 - 19 0.34 0.17 0.16 0.47
19 - 20 0.35 0.15 0.3 0.61
Load Value 20 - 21 0.38 0.14 0.13 0.48
Loaded Width (Actual) 298 21 - 22 0.38 0.12 0.3 0.64
Heel 348 mm BC 8,549 mm Heel 348 mm
Floor Dead Load (KPa) 0.63 22 - 23 0.4 0.11 0.12 0.49
Floor Live Load (KPa) 1.92 23 - 24 0.39 0.09 0.3 0.65
Floor Point Load (KPa) 1.80 24 - 25 0.4 0.08 0.12 0.48
Ceiling Dead Load (KPa) 0.15 25 - 26 0.37 0.07 0.3 0.63
Ceiling Live Load (KPa) 0.00 26 - 27 0.37 0.06 0.14 0.48
Ceiling Point Load (KPa) 1.10 27 - 28 0.34 0.05 0.3 0.59
28 - 29 0.32 0.04 0.16 0.46
29 - 30 0.28 0.03 0.29 0.52
Truss Summary 30 - 31 0.25 0.02 0.19 0.42
31 - 32 0.21 0.01 0.28 0.43
Item Value
32 - 33 0.16 0.01 0.22 0.35
Steel 6050-G550-0.95
33 - 34 0.11 0.01 0.25 0.32
Width [m] 8.5 Reactions 34 - 35 0.06 0 0.25 0.3
Height [m] 0.4 35 - 36 0 0 0.25 0.25
Loaded Width 298 Reaction @ Node 47 Reaction @ Node 72 Bottom Chord
Purlin Spacing 250 Max. Ult 6,472 Max. Ult 3,191 37 - 38 0 0 0.12 0.12
Batten Spacing 600 Min. Ult 1,191 Min. Ult 587 38 - 39 0.04 0 0.16 0.17
BC Span [m] 8.5 39 - 40 0.09 0 0.15 0.22
Steel [m] 30.6 40 - 41 0.17 0 0.16 0.3
Weight [kg] 40.4 41 - 42 0.2 0 0.18 0.34
Max. Deflection Up 2.690 42 - 43 0.3 0 0.18 0.44
Max. Deflection Down -6.821 43 - 44 0.32 0 0.22 0.51
Max CR - Top Chord 0.65 44 - 45 0.45 0 0.29 0.67
Max CR - Bottom Chord 0.87 45 - 46 0.45 0 0.29 0.67
Status Pass 46 - 47 0.45 0 0.51 0.87
47 - 48 0.45 0 0.51 0.87
Nodes / Deflections 48 - 49 0.45 0.02 0.34 0.59
BC Deflections Summary 49 - 50 0.47 0.07 0.34 0.62
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 1.1 2.7 0.0 0.0 22 (5227, -34) -2.8 -6.8 0.0 0.0 43 (1504, -316) 0.3 0.8 0.0 0.0 50 - 51 0.38 0.11 0.17 0.51
Maximum Limit Ratio 51 - 52 0.39 0.15 0.13 0.5
2 (263, -34) 1.0 2.4 0.0 0.0 23 (5308, -34) -2.8 -6.8 0.0 0.0 44 (1586, -316) 0.3 0.7 0.0 0.0
Dead Load -2.77 21.72 0.13 52 - 53 0.31 0.17 0.13 0.42
3 (345, -34) 0.9 2.3 0.0 0.0 24 (5723, -34) -2.7 -6.8 0.0 0.0 45 (2001, -316) 0.0 0.0 0.0 0.0
Live Load -6.82 26.07 0.26 53 - 54 0.33 0.21 0.14 0.42
4 (760, -34) 0.7 1.7 0.0 0.0 25 (5804, -34) -2.7 -6.7 0.0 0.0 46 (2082, -316) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0.26 0.22 0.12 0.35
5 (841, -34) 0.7 1.6 0.0 0.0 26 (6219, -34) -2.6 -6.3 0.0 0.0 47 (2216, -316) 0.0 0.0 0.0 0.0
6 (1256, -34) 0.4 1.1 0.0 0.0 27 (6301, -34) -2.5 -6.2 0.0 0.0 48 (2497, -316) -0.4 -0.9 0.0 0.0 55 - 56 0.27 0.25 0.14 0.37
7 (1338, -34) 0.4 1.0 0.0 0.0 28 (6716, -34) -2.2 -5.5 0.0 0.0 49 (2578, -316) -0.5 -1.3 0.0 0.0 56 - 57 0.21 0.26 0.11 0.37
8 (1752, -34) 0.2 0.4 0.0 0.0 29 (6797, -34) -2.1 -5.3 0.0 0.0 50 (2993, -316) -1.0 -2.5 0.0 0.0 57 - 58 0.21 0.28 0.15 0.39
9 (1834, -34) 0.1 0.3 0.0 0.0 30 (7212, -34) -1.7 -4.2 0.0 0.0 51 (3075, -316) -1.1 -2.7 0.0 0.0 58 - 59 0.16 0.28 0.1 0.37
10 (2249, -34) -0.1 -0.3 0.0 0.0 31 (7293, -34) -1.6 -4.0 0.0 0.0 52 (3489, -316) -1.6 -3.8 0.0 0.0 59 - 60 0.16 0.29 0.15 0.39
11 (2330, -34) -0.2 -0.5 0.0 0.0 32 (7708, -34) -1.1 -2.7 0.0 0.0 53 (3571, -316) -1.7 -4.1 0.0 0.0 60 - 61 0.12 0.28 0.08 0.36
12 (2745, -34) -0.7 -1.7 0.0 0.0 33 (7790, -34) -1.0 -2.4 0.0 0.0 54 (3986, -316) -2.1 -5.1 0.0 0.0 61 - 62 0.12 0.29 0.15 0.39
13 (2826, -34) -0.8 -2.0 0.0 0.0 34 (8204, -34) -0.4 -0.9 0.0 0.0 55 (4067, -316) -2.1 -5.3 0.0 0.0 62 - 63 0.09 0.27 0.1 0.37
14 (3241, -34) -1.3 -3.2 0.0 0.0 35 (8286, -34) -0.2 -0.6 0.0 0.0 56 (4482, -316) -2.4 -6.0 0.0 0.0 63 - 64 0.09 0.27 0.14 0.38
15 (3323, -34) -1.4 -3.4 0.0 0.0 36 (8523, -34) 0.1 0.3 0.0 0.0 57 (4564, -316) -2.5 -6.2 0.0 0.0 64 - 65 0.06 0.25 0.11 0.36
16 (3738, -34) -1.8 -4.5 0.0 0.0 37 (26, -316) 1.1 2.7 0.0 0.0 58 (4978, -316) -2.7 -6.6 0.0 0.0 65 - 66 0.06 0.24 0.14 0.36
17 (3819, -34) -1.9 -4.7 0.0 0.0 38 (99, -316) 1.1 2.6 0.0 0.0 59 (5060, -316) -2.7 -6.7 0.0 0.0 66 - 67 0.04 0.21 0.13 0.33
18 (4234, -34) -2.3 -5.6 0.0 0.0 39 (512, -316) 0.8 2.0 0.0 0.0 60 (5475, -316) -2.8 -6.8 0.0 0.0 67 - 68 0.03 0.19 0.14 0.31
19 (4315, -34) -2.3 -5.8 0.0 0.0 40 (593, -316) 0.8 1.9 0.0 0.0 61 (5556, -316) -2.8 -6.8 0.0 0.0 68 - 69 0.02 0.15 0.14 0.29
20 (4730, -34) -2.6 -6.4 0.0 0.0 41 (1008, -316) 0.6 1.4 0.0 0.0 62 (5971, -316) -2.7 -6.6 0.0 0.0 69 - 70 0.01 0.12 0.16 0.27
21 (4812, -34) -2.6 -6.5 0.0 0.0 42 (1089, -316) 0.5 1.3 0.0 0.0 63 (6052, -316) -2.6 -6.5 0.0 0.0 70 - 71 0.01 0.08 0.16 0.23

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F31 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
71 - 72 0 0.04 0.13 0.17
72 - 73 0 0 0.07 0.08
Webs
37 - 1 0.04 0.01 0 0.04
73 - 36 0.02 0.02 0 0.03
38 - 2 0 0.06 0 0.07
3 - 39 0.11 0 0.01 0.12
40 - 4 0 0.11 0.01 0.12
5 - 41 0.11 0 0.01 0.12
42 - 6 0 0.12 0.01 0.13
7 - 43 0.12 0 0.01 0.13
44 - 8 0 0.14 0.01 0.15
9 - 45 0.12 0 0.01 0.13
46 - 10 0.08 0.02 0 0.08
11 - 48 0.02 0.08 0.01 0.09
49 - 12 0.14 0 0.01 0.14
13 - 50 0 0.13 0.01 0.14
51 - 14 0.12 0 0.01 0.12
15 - 52 0 0.1 0.01 0.11
53 - 16 0.09 0 0.01 0.1
17 - 54 0 0.09 0.01 0.1
55 - 18 0.08 0.01 0.01 0.09
19 - 56 0.02 0.08 0 0.08
57 - 20 0.07 0.03 0 0.07
21 - 58 0.03 0.06 0 0.07
59 - 22 0.05 0.04 0 0.06
23 - 60 0.04 0.05 0 0.05
61 - 24 0.04 0.05 0 0.06
25 - 62 0.06 0.04 0 0.06
63 - 26 0.03 0.07 0 0.07
27 - 64 0.07 0.03 0 0.07
65 - 28 0.02 0.08 0.01 0.08
29 - 66 0.08 0.02 0.01 0.09
67 - 30 0.02 0.09 0.01 0.1
31 - 68 0.1 0.02 0.01 0.1
69 - 32 0.01 0.11 0.01 0.11
33 - 70 0.11 0.01 0.01 0.12
71 - 34 0.01 0.11 0.01 0.12
35 - 72 0.12 0.01 0.01 0.12

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6467, -316) -2.4 -5.9 0.0 0.0
65 (6549, -316) -2.4 -5.8 0.0 0.0
66 (6964, -316) -2.0 -4.9 0.0 0.0
67 (7045, -316) -1.9 -4.7 0.0 0.0
68 (7460, -316) -1.4 -3.5 0.0 0.0
69 (7541, -316) -1.3 -3.2 0.0 0.0
70 (7956, -316) -0.7 -1.8 0.0 0.0
71 (8038, -316) -0.6 -1.5 0.0 0.0
72 (8451, -316) 0.0 0.0 0.0 0.0
73 (8523, -316) 0.1 0.3 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F32

Environment Truss F32 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.19 0.19
Wind Code AS/NZS 1170.2 2-3 0 0.02 0.2 0.19
Code AU 3-4 0 0.06 0.24 0.25
Building Function A 4-5 0 0.1 0.24 0.24
Importance Level 2 5-6 0 0.14 0.24 0.28
6-7 0 0.18 0.26 0.35
Annual prob. of exceed. - Wind 1:500
7-8 0 0.23 0.26 0.39
Annual prob. of exceed. - Snow 1:150
8-9 0 0.27 0.23 0.43
Roof Type Hip
9 - 10 0 0.31 0.23 0.47
Building Length [m] 19.8
10 - 11 0.01 0.32 0.19 0.38
Building Width [m] 25.1 8,549 mm
11 - 12 0.05 0.32 0.22 0.41
Avg. Roof Height [m] 6.3 12 - 13 0.1 0.3 0.21 0.39
1 23 4 5 6 7 89 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30/31 32/33 34/35 36
Enclosed? Enclosed 13 - 14 0.14 0.28 0.27 0.38
14 - 15 0.19 0.26 0.2 0.36
For complete job environment details, refer to the job
15 - 16 0.22 0.24 0.27 0.44
Enviroments Report.
16 - 17 0.26 0.23 0.17 0.4
37/38 39/40 41/42 43/44 45/46/47 48/49 50/51 52/53 54/55 56/57 58/59 60/61 62/63 64/65 66/67 68/69 70/71 72/73 17 - 18 0.28 0.21 0.28 0.52
Load Summary 18 - 19 0.31 0.2 0.15 0.43
19 - 20 0.31 0.18 0.29 0.56
Load Value 20 - 21 0.34 0.17 0.13 0.44
Loaded Width (Actual) 129 21 - 22 0.34 0.15 0.29 0.59
Heel 348 mm BC 8,549 mm Heel 348 mm
Floor Dead Load (KPa) 0.63 22 - 23 0.35 0.14 0.11 0.44
Floor Live Load (KPa) 1.92 23 - 24 0.34 0.13 0.29 0.6
Floor Point Load (KPa) 1.80 24 - 25 0.35 0.11 0.12 0.44
Ceiling Dead Load (KPa) 0.15 25 - 26 0.33 0.1 0.29 0.58
Ceiling Live Load (KPa) 0.00 26 - 27 0.33 0.09 0.13 0.43
Ceiling Point Load (KPa) 1.10 27 - 28 0.3 0.08 0.29 0.54
28 - 29 0.28 0.07 0.15 0.41
29 - 30 0.25 0.05 0.28 0.48
Truss Summary 30 - 31 0.22 0.04 0.18 0.37
31 - 32 0.18 0.03 0.27 0.4
Item Value
32 - 33 0.14 0.02 0.2 0.31
Steel 6050-G550-0.95
33 - 34 0.09 0.02 0.25 0.31
Width [m] 8.5 Reactions 34 - 35 0.05 0.01 0.23 0.27
Height [m] 0.4 35 - 36 0 0 0.23 0.23
Loaded Width 129 Reaction @ Node 47 Reaction @ Node 72 Bottom Chord
Purlin Spacing 250 Max. Ult 2,802 Max. Ult 1,381 37 - 38 0 0 0.12 0.12
Batten Spacing 600 Min. Ult 515 Min. Ult 254 38 - 39 0.04 0 0.16 0.17
BC Span [m] 8.5 39 - 40 0.09 0 0.15 0.22
Steel [m] 30.6 40 - 41 0.16 0 0.15 0.29
Weight [kg] 40.4 41 - 42 0.2 0 0.17 0.33
Max. Deflection Up 1.165 42 - 43 0.29 0 0.17 0.42
Max. Deflection Down -2.953 43 - 44 0.31 0 0.2 0.48
Max CR - Top Chord 0.60 44 - 45 0.42 0 0.25 0.62
Max CR - Bottom Chord 0.79 45 - 46 0.42 0 0.25 0.62
Status Pass 46 - 47 0.43 0.01 0.42 0.78
47 - 48 0.43 0.01 0.42 0.79
Nodes / Deflections 48 - 49 0.43 0.03 0.18 0.53
BC Deflections Summary 49 - 50 0.47 0.07 0.18 0.58
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.5 1.2 0.0 0.0 22 (5227, -34) -1.2 -2.9 0.0 0.0 43 (1504, -316) 0.1 0.3 0.0 0.0 50 - 51 0.38 0.11 0.14 0.49
Maximum Limit Ratio 51 - 52 0.4 0.14 0.13 0.5
2 (263, -34) 0.4 1.0 0.0 0.0 23 (5308, -34) -1.2 -2.9 0.0 0.0 44 (1586, -316) 0.1 0.3 0.0 0.0
Dead Load -1.20 21.72 0.06 52 - 53 0.33 0.16 0.12 0.42
3 (345, -34) 0.4 1.0 0.0 0.0 24 (5723, -34) -1.2 -2.9 0.0 0.0 45 (2001, -316) 0.0 0.0 0.0 0.0
Live Load -2.95 26.07 0.11 53 - 54 0.35 0.19 0.13 0.44
4 (760, -34) 0.3 0.7 0.0 0.0 25 (5804, -34) -1.2 -2.9 0.0 0.0 46 (2082, -316) 0.0 0.0 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0.29 0.2 0.11 0.37
5 (841, -34) 0.3 0.7 0.0 0.0 26 (6219, -34) -1.1 -2.7 0.0 0.0 47 (2216, -316) 0.0 0.0 0.0 0.0
6 (1256, -34) 0.2 0.5 0.0 0.0 27 (6301, -34) -1.1 -2.7 0.0 0.0 48 (2497, -316) -0.2 -0.4 0.0 0.0 55 - 56 0.31 0.23 0.14 0.38
7 (1338, -34) 0.2 0.4 0.0 0.0 28 (6716, -34) -1.0 -2.4 0.0 0.0 49 (2578, -316) -0.2 -0.6 0.0 0.0 56 - 57 0.25 0.23 0.1 0.33
8 (1752, -34) 0.1 0.2 0.0 0.0 29 (6797, -34) -0.9 -2.3 0.0 0.0 50 (2993, -316) -0.4 -1.1 0.0 0.0 57 - 58 0.26 0.25 0.14 0.35
9 (1834, -34) 0.1 0.1 0.0 0.0 30 (7212, -34) -0.7 -1.8 0.0 0.0 51 (3075, -316) -0.5 -1.2 0.0 0.0 58 - 59 0.21 0.25 0.09 0.33
10 (2249, -34) -0.1 -0.1 0.0 0.0 31 (7293, -34) -0.7 -1.7 0.0 0.0 52 (3489, -316) -0.7 -1.7 0.0 0.0 59 - 60 0.22 0.26 0.14 0.35
11 (2330, -34) -0.1 -0.2 0.0 0.0 32 (7708, -34) -0.5 -1.2 0.0 0.0 53 (3571, -316) -0.7 -1.8 0.0 0.0 60 - 61 0.17 0.25 0.08 0.33
12 (2745, -34) -0.3 -0.7 0.0 0.0 33 (7790, -34) -0.4 -1.0 0.0 0.0 54 (3986, -316) -0.9 -2.2 0.0 0.0 61 - 62 0.18 0.26 0.14 0.35
13 (2826, -34) -0.4 -0.9 0.0 0.0 34 (8204, -34) -0.2 -0.4 0.0 0.0 55 (4067, -316) -0.9 -2.3 0.0 0.0 62 - 63 0.14 0.24 0.09 0.33
14 (3241, -34) -0.6 -1.4 0.0 0.0 35 (8286, -34) -0.1 -0.3 0.0 0.0 56 (4482, -316) -1.1 -2.6 0.0 0.0 63 - 64 0.14 0.24 0.14 0.34
15 (3323, -34) -0.6 -1.5 0.0 0.0 36 (8523, -34) 0.0 0.1 0.0 0.0 57 (4564, -316) -1.1 -2.7 0.0 0.0 64 - 65 0.1 0.22 0.1 0.32
16 (3738, -34) -0.8 -1.9 0.0 0.0 37 (26, -316) 0.5 1.2 0.0 0.0 58 (4978, -316) -1.2 -2.9 0.0 0.0 65 - 66 0.1 0.21 0.14 0.32
17 (3819, -34) -0.8 -2.0 0.0 0.0 38 (99, -316) 0.5 1.1 0.0 0.0 59 (5060, -316) -1.2 -2.9 0.0 0.0 66 - 67 0.07 0.18 0.11 0.29
18 (4234, -34) -1.0 -2.4 0.0 0.0 39 (512, -316) 0.4 0.9 0.0 0.0 60 (5475, -316) -1.2 -3.0 0.0 0.0 67 - 68 0.07 0.16 0.13 0.27
19 (4315, -34) -1.0 -2.5 0.0 0.0 40 (593, -316) 0.3 0.8 0.0 0.0 61 (5556, -316) -1.2 -3.0 0.0 0.0 68 - 69 0.05 0.13 0.12 0.26
20 (4730, -34) -1.1 -2.8 0.0 0.0 41 (1008, -316) 0.2 0.6 0.0 0.0 62 (5971, -316) -1.2 -2.9 0.0 0.0 69 - 70 0.04 0.11 0.14 0.24
21 (4812, -34) -1.1 -2.8 0.0 0.0 42 (1089, -316) 0.2 0.6 0.0 0.0 63 (6052, -316) -1.1 -2.8 0.0 0.0 70 - 71 0.02 0.07 0.14 0.2

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F32 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
71 - 72 0.01 0.04 0.12 0.15
72 - 73 0 0 0.08 0.08
Webs
37 - 1 0.04 0.01 0 0.04
73 - 36 0.03 0.02 0 0.03
38 - 2 0.01 0.06 0 0.06
3 - 39 0.11 0 0.01 0.11
40 - 4 0 0.11 0.01 0.12
5 - 41 0.11 0 0.01 0.11
42 - 6 0 0.11 0.01 0.12
7 - 43 0.11 0 0.01 0.12
44 - 8 0 0.13 0.01 0.14
9 - 45 0.11 0 0.01 0.12
46 - 10 0.07 0.03 0 0.07
11 - 48 0.03 0.07 0 0.08
49 - 12 0.1 0 0.01 0.11
13 - 50 0 0.11 0.01 0.11
51 - 14 0.09 0 0.01 0.1
15 - 52 0 0.09 0.01 0.1
53 - 16 0.08 0.01 0.01 0.09
17 - 54 0.01 0.08 0.01 0.08
55 - 18 0.07 0.02 0 0.08
19 - 56 0.02 0.07 0 0.07
57 - 20 0.06 0.03 0 0.06
21 - 58 0.03 0.06 0 0.06
59 - 22 0.05 0.04 0 0.05
23 - 60 0.04 0.05 0 0.05
61 - 24 0.04 0.05 0 0.06
25 - 62 0.06 0.04 0 0.06
63 - 26 0.03 0.06 0 0.07
27 - 64 0.07 0.03 0 0.07
65 - 28 0.03 0.07 0 0.08
29 - 66 0.08 0.03 0 0.08
67 - 30 0.03 0.08 0.01 0.09
31 - 68 0.09 0.03 0.01 0.09
69 - 32 0.03 0.1 0.01 0.1
33 - 70 0.1 0.02 0.01 0.1
71 - 34 0.02 0.1 0.01 0.1
35 - 72 0.1 0.02 0.01 0.11

Nodes / Deflections
Node Position (x,y) DL LL Wind Snow Joint
64 (6467, -316) -1.0 -2.6 0.0 0.0
65 (6549, -316) -1.0 -2.5 0.0 0.0
66 (6964, -316) -0.9 -2.1 0.0 0.0
67 (7045, -316) -0.8 -2.0 0.0 0.0
68 (7460, -316) -0.6 -1.5 0.0 0.0
69 (7541, -316) -0.6 -1.4 0.0 0.0
70 (7956, -316) -0.3 -0.8 0.0 0.0
71 (8038, -316) -0.3 -0.6 0.0 0.0
72 (8451, -316) 0.0 0.0 0.0 0.0
73 (8523, -316) 0.0 0.1 0.0 0.0

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F33

Environment Truss F33 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.26 0.26
Wind Code AS/NZS 1170.2 2-3 0.06 0 0.26 0.31
Code AU 3-4 0.12 0 0.25 0.33
Building Function A 4-5 0.18 0 0.23 0.37
Importance Level 2 5-6 0.24 0 0.28 0.45
6-7 0.29 0 0.2 0.44
Annual prob. of exceed. - Wind 1:500
7-8 0.33 0 0.29 0.55
Annual prob. of exceed. - Snow 1:150
8-9 0.37 0 0.17 0.5
Roof Type Hip
9 - 10 0.4 0 0.3 0.63
Building Length [m] 19.8
7,074 mm 10 - 11 0.43 0 0.16 0.53
Building Width [m] 25.1
11 - 12 0.45 0 0.31 0.69
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30 12 - 13 0.47 0 0.15 0.56
Enclosed? Enclosed 13 - 14 0.48 0 0.32 0.73
14 - 15 0.49 0 0.13 0.57
For complete job environment details, refer to the job
15 - 16 0.49 0 0.32 0.74
Enviroments Report.
16 - 17 0.49 0 0.13 0.57
17 - 18 0.48 0 0.32 0.73
31/32 33/34 35/36 37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60
Load Summary 18 - 19 0.47 0 0.15 0.56
19 - 20 0.45 0 0.31 0.69
Load Value 20 - 21 0.43 0 0.16 0.53
Loaded Width (Actual) 282 21 - 22 0.4 0 0.3 0.63
Floor Dead Load (KPa) 0.63
Heel 348 mm BC 7,074 mm Heel 348 mm 22 - 23 0.37 0 0.17 0.5
Floor Live Load (KPa) 1.92 23 - 24 0.33 0 0.29 0.55
Floor Point Load (KPa) 1.80 24 - 25 0.29 0 0.2 0.44
Ceiling Dead Load (KPa) 0.15 25 - 26 0.24 0 0.28 0.45
Ceiling Live Load (KPa) 0.00 26 - 27 0.18 0 0.23 0.37
Ceiling Point Load (KPa) 1.10 27 - 28 0.12 0 0.25 0.33
28 - 29 0.06 0 0.26 0.31
29 - 30 0 0 0.26 0.26
Truss Summary Bottom Chord
31 - 32 0 0 0.07 0.08
Item Value
32 - 33 0 0.05 0.14 0.18
Steel 6050-G550-0.95
33 - 34 0 0.09 0.18 0.26
Width [m] 7.1 Reactions 34 - 35 0 0.13 0.18 0.31
Height [m] 0.4 35 - 36 0 0.17 0.15 0.31
Loaded Width 282 Reaction @ Node 32 Reaction @ Node 59 36 - 37 0 0.21 0.14 0.35
Purlin Spacing 250 Max. Ult 3,778 Max. Ult 3,778 37 - 38 0 0.24 0.14 0.37
Batten Spacing 600 Min. Ult 695 Min. Ult 695 38 - 39 0 0.27 0.14 0.4
BC Span [m] 7.1 39 - 40 0 0.3 0.13 0.41
Steel [m] 25.4 40 - 41 0 0.32 0.15 0.43
Weight [kg] 33.6 41 - 42 0 0.33 0.12 0.43
Max. Deflection Up 0.417 42 - 43 0 0.35 0.15 0.45
Max. Deflection Down -12.667 43 - 44 0 0.36 0.11 0.44
Max CR - Top Chord 0.74 44 - 45 0 0.36 0.15 0.45
Max CR - Bottom Chord 0.45 45 - 46 0 0.36 0.09 0.43
Status Pass 46 - 47 0 0.36 0.15 0.45
47 - 48 0 0.36 0.11 0.44
Nodes / Deflections 48 - 49 0 0.35 0.15 0.45
BC Deflections Summary 49 - 50 0 0.33 0.12 0.43
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.2 0.4 0.0 0.0 22 (5237, -34) -3.7 -9.1 0.0 0.0 43 (2999, -316) -5.0 -12.3 0.0 0.0 50 - 51 0 0.32 0.15 0.43
Maximum Limit Ratio 51 - 52 0 0.3 0.13 0.41
2 (264, -34) -0.4 -0.9 0.0 0.0 23 (5318, -34) -3.6 -8.8 0.0 0.0 44 (3080, -316) -5.0 -12.4 0.0 0.0
Dead Load -5.15 22.65 0.23 52 - 53 0 0.27 0.14 0.4
3 (346, -34) -0.6 -1.5 0.0 0.0 24 (5734, -34) -2.8 -6.9 0.0 0.0 45 (3496, -316) -5.1 -12.7 0.0 0.0
Live Load -12.67 27.18 0.47 53 - 54 0 0.24 0.14 0.37
4 (761, -34) -1.6 -3.8 0.0 0.0 25 (5816, -34) -2.6 -6.5 0.0 0.0 46 (3578, -316) -5.1 -12.7 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0 0.21 0.14 0.35
5 (843, -34) -1.8 -4.3 0.0 0.0 26 (6231, -34) -1.8 -4.3 0.0 0.0 47 (3994, -316) -5.0 -12.4 0.0 0.0
6 (1259, -34) -2.6 -6.5 0.0 0.0 27 (6313, -34) -1.6 -3.8 0.0 0.0 48 (4075, -316) -5.0 -12.3 0.0 0.0 55 - 56 0 0.17 0.15 0.31
7 (1340, -34) -2.8 -6.9 0.0 0.0 28 (6728, -34) -0.6 -1.5 0.0 0.0 49 (4491, -316) -4.7 -11.5 0.0 0.0 56 - 57 0 0.13 0.18 0.31
8 (1756, -34) -3.6 -8.8 0.0 0.0 29 (6810, -34) -0.4 -0.9 0.0 0.0 50 (4572, -316) -4.6 -11.3 0.0 0.0 57 - 58 0 0.09 0.18 0.26
9 (1837, -34) -3.7 -9.1 0.0 0.0 30 (7048, -34) 0.2 0.4 0.0 0.0 51 (4988, -316) -4.1 -10.1 0.0 0.0 58 - 59 0 0.05 0.14 0.18
10 (2253, -34) -4.3 -10.6 0.0 0.0 31 (26, -316) 0.2 0.4 0.0 0.0 52 (5070, -316) -4.0 -9.8 0.0 0.0 59 - 60 0 0 0.07 0.08
Webs
11 (2335, -34) -4.4 -10.9 0.0 0.0 32 (99, -316) 0.0 0.0 0.0 0.0 53 (5485, -316) -3.3 -8.1 0.0 0.0
12 (2750, -34) -4.8 -11.9 0.0 0.0 33 (513, -316) -1.0 -2.4 0.0 0.0 54 (5567, -316) -3.1 -7.7 0.0 0.0 31 - 1 0.02 0.02 0 0.03
13 (2832, -34) -4.9 -12.0 0.0 0.0 34 (594, -316) -1.2 -2.9 0.0 0.0 55 (5983, -316) -2.3 -5.7 0.0 0.0 60 - 30 0.02 0.02 0 0.03
14 (3248, -34) -5.1 -12.6 0.0 0.0 35 (1010, -316) -2.1 -5.2 0.0 0.0 56 (6064, -316) -2.1 -5.2 0.0 0.0 32 - 2 0.12 0 0.01 0.13
15 (3329, -34) -5.1 -12.6 0.0 0.0 36 (1091, -316) -2.3 -5.7 0.0 0.0 57 (6480, -316) -1.2 -2.9 0.0 0.0 3 - 33 0 0.12 0.01 0.12
16 (3745, -34) -5.1 -12.6 0.0 0.0 37 (1507, -316) -3.1 -7.7 0.0 0.0 58 (6561, -316) -1.0 -2.4 0.0 0.0 34 - 4 0.12 0 0.01 0.13
17 (3826, -34) -5.1 -12.6 0.0 0.0 38 (1589, -316) -3.3 -8.1 0.0 0.0 59 (6975, -316) 0.0 0.0 0.0 0.0 5 - 35 0 0.12 0.01 0.12
18 (4242, -34) -4.9 -12.0 0.0 0.0 39 (2004, -316) -4.0 -9.8 0.0 0.0 60 (7048, -316) 0.2 0.4 0.0 0.0 36 - 6 0.11 0 0.01 0.11
19 (4324, -34) -4.8 -11.9 0.0 0.0 40 (2086, -316) -4.1 -10.1 0.0 0.0 7 - 37 0 0.1 0.01 0.11
20 (4740, -34) -4.4 -10.9 0.0 0.0 41 (2502, -316) -4.6 -11.3 0.0 0.0 38 - 8 0.09 0 0.01 0.1
21 (4821, -34) -4.3 -10.6 0.0 0.0 42 (2583, -316) -4.7 -11.5 0.0 0.0 9 - 39 0.01 0.09 0.01 0.09

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F33 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
40 - 10 0.08 0.01 0.01 0.08
11 - 41 0.02 0.08 0 0.08
42 - 12 0.07 0.03 0 0.07
13 - 43 0.03 0.06 0 0.07
44 - 14 0.06 0.04 0 0.06
15 - 45 0.04 0.05 0 0.06
46 - 16 0.04 0.05 0 0.06
17 - 47 0.06 0.04 0 0.06
48 - 18 0.03 0.06 0 0.07
19 - 49 0.07 0.03 0 0.07
50 - 20 0.02 0.08 0 0.08
21 - 51 0.08 0.01 0.01 0.08
52 - 22 0.01 0.09 0.01 0.09
23 - 53 0.09 0 0.01 0.1
54 - 24 0 0.1 0.01 0.11
25 - 55 0.11 0 0.01 0.11
56 - 26 0 0.12 0.01 0.12
27 - 57 0.12 0 0.01 0.13
58 - 28 0 0.12 0.01 0.12
29 - 59 0.12 0 0.01 0.13

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F34
Identical Trusses
Environment Truss F34
F34 F35 F36 F37
Site Data F38 F39 F40
Elevation ASL [m] 10
Building Data 7 Identical Trusses
Wind Code AS/NZS 1170.2
Code AU Forces
Building Function A
Importance Level 2 Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Annual prob. of exceed. - Wind 1:500 Top Chord
Annual prob. of exceed. - Snow 1:150 1-2 0 0 0.28 0.28
Roof Type Hip 2-3 0.09 0 0.28 0.34
Building Length [m] 19.8 3-4 0.17 0 0.25 0.36
Building Width [m] 25.1
7,074 mm 4-5 0.26 0 0.24 0.45
Avg. Roof Height [m] 6.3 5-6 0.34 0 0.28 0.54
1 2 3 4 5 6 7 8 9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30
6-7 0.41 0 0.21 0.58
Enclosed? Enclosed
7-8 0.47 0 0.3 0.65
For complete job environment details, refer to the job 8-9 0.53 0 0.19 0.69
Enviroments Report. 9 - 10 0.58 0 0.31 0.74
10 - 11 0.62 0 0.17 0.76
31/32 33/34 35/36 37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60 11 - 12 0.65 0 0.32 0.8
Load Summary 12 - 13 0.68 0 0.16 0.8
13 - 14 0.7 0 0.33 0.83
Load Value
14 - 15 0.71 0 0.14 0.81
Loaded Width (Actual) 406
Heel 348 mm BC 7,074 mm Heel 348 mm 15 - 16 0.71 0 0.33 0.84
Floor Dead Load (KPa) 0.63
16 - 17 0.71 0 0.14 0.81
Floor Live Load (KPa) 1.92 17 - 18 0.7 0 0.33 0.83
Floor Point Load (KPa) 1.80 18 - 19 0.68 0 0.16 0.8
Ceiling Dead Load (KPa) 0.15 19 - 20 0.65 0 0.32 0.8
Ceiling Live Load (KPa) 0.00 20 - 21 0.62 0 0.17 0.76
Ceiling Point Load (KPa) 1.10 21 - 22 0.58 0 0.31 0.74
22 - 23 0.53 0 0.19 0.69
Truss Summary 23 - 24 0.47 0 0.3 0.65
24 - 25 0.41 0 0.21 0.58
Item Value 25 - 26 0.34 0 0.28 0.54
Steel 6050-G550-0.95 26 - 27 0.26 0 0.24 0.45
27 - 28 0.17 0 0.25 0.36
Width [m] 7.1 Reactions 28 - 29 0.09 0 0.28 0.34
Height [m] 0.4
29 - 30 0 0 0.28 0.28
Loaded Width 406 Reaction @ Node 32 Reaction @ Node 59
Bottom Chord
Purlin Spacing 250 Max. Ult 5,440 Max. Ult 5,440
31 - 32 0 0 0.07 0.08
Batten Spacing 600 Min. Ult 1,001 Min. Ult 1,001
32 - 33 0 0.07 0.17 0.24
BC Span [m] 7.1
33 - 34 0 0.13 0.25 0.38
Steel [m] 25.4 34 - 35 0 0.19 0.25 0.45
Weight [kg] 33.6 35 - 36 0 0.25 0.2 0.45
Max. Deflection Up 0.601 36 - 37 0 0.3 0.2 0.51
Max. Deflection Down -18.237 37 - 38 0 0.35 0.19 0.54
Max CR - Top Chord 0.84 38 - 39 0 0.39 0.19 0.58
Max CR - Bottom Chord 0.64 39 - 40 0 0.43 0.16 0.59
Status Pass 40 - 41 0 0.46 0.16 0.62
Nodes / Deflections 41 - 42 0 0.48 0.14 0.62
42 - 43 0 0.5 0.16 0.64
BC Deflections Summary Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint 43 - 44 0 0.51 0.12 0.62
Maximum Limit Ratio 1 (26, -34) 0.2 0.6 0.0 0.0 22 (5237, -34) -5.3 -13.2 0.0 0.0 43 (2999, -316) -7.2 -17.7 0.0 0.0 44 - 45 0 0.52 0.16 0.63
2 (264, -34) -0.6 -1.4 0.0 0.0 23 (5318, -34) -5.1 -12.7 0.0 0.0 44 (3080, -316) -7.3 -17.9 0.0 0.0 45 - 46 0 0.52 0.1 0.6
Dead Load -7.41 22.65 0.33
3 (346, -34) -0.9 -2.1 0.0 0.0 24 (5734, -34) -4.1 -10.0 0.0 0.0 45 (3496, -316) -7.4 -18.2 0.0 0.0 46 - 47 0 0.52 0.16 0.63
Live Load -18.24 27.18 0.67
4 (761, -34) -2.2 -5.5 0.0 0.0 25 (5816, -34) -3.8 -9.4 0.0 0.0 46 (3578, -316) -7.4 -18.2 0.0 0.0 47 - 48 0 0.51 0.12 0.62
Dead Load 0.00 0.00 0.00
5 (843, -34) -2.5 -6.2 0.0 0.0 26 (6231, -34) -2.5 -6.2 0.0 0.0 47 (3994, -316) -7.3 -17.9 0.0 0.0 48 - 49 0 0.5 0.16 0.64
6 (1259, -34) -3.8 -9.4 0.0 0.0 27 (6313, -34) -2.2 -5.5 0.0 0.0 48 (4075, -316) -7.2 -17.7 0.0 0.0 49 - 50 0 0.48 0.14 0.62
7 (1340, -34) -4.1 -10.0 0.0 0.0 28 (6728, -34) -0.9 -2.1 0.0 0.0 49 (4491, -316) -6.7 -16.6 0.0 0.0 50 - 51 0 0.46 0.16 0.62
8 (1756, -34) -5.1 -12.7 0.0 0.0 29 (6810, -34) -0.6 -1.4 0.0 0.0 50 (4572, -316) -6.6 -16.3 0.0 0.0 51 - 52 0 0.43 0.16 0.59
9 (1837, -34) -5.3 -13.2 0.0 0.0 30 (7048, -34) 0.2 0.6 0.0 0.0 51 (4988, -316) -5.9 -14.5 0.0 0.0 52 - 53 0 0.39 0.19 0.58
10 (2253, -34) -6.2 -15.3 0.0 0.0 31 (26, -316) 0.2 0.6 0.0 0.0 52 (5070, -316) -5.7 -14.1 0.0 0.0 53 - 54 0 0.35 0.19 0.54
11 (2335, -34) -6.4 -15.7 0.0 0.0 32 (99, -316) 0.0 0.0 0.0 0.0 53 (5485, -316) -4.7 -11.6 0.0 0.0 54 - 55 0 0.3 0.2 0.51
12 (2750, -34) -7.0 -17.1 0.0 0.0 33 (513, -316) -1.4 -3.5 0.0 0.0 54 (5567, -316) -4.5 -11.1 0.0 0.0 55 - 56 0 0.25 0.2 0.45
13 (2832, -34) -7.0 -17.3 0.0 0.0 34 (594, -316) -1.7 -4.2 0.0 0.0 55 (5983, -316) -3.3 -8.2 0.0 0.0 56 - 57 0 0.19 0.25 0.45
14 (3248, -34) -7.3 -18.1 0.0 0.0 35 (1010, -316) -3.0 -7.5 0.0 0.0 56 (6064, -316) -3.0 -7.5 0.0 0.0 57 - 58 0 0.13 0.25 0.38
15 (3329, -34) -7.4 -18.2 0.0 0.0 36 (1091, -316) -3.3 -8.2 0.0 0.0 57 (6480, -316) -1.7 -4.2 0.0 0.0 58 - 59 0 0.07 0.17 0.24
16 (3745, -34) -7.4 -18.2 0.0 0.0 37 (1507, -316) -4.5 -11.1 0.0 0.0 58 (6561, -316) -1.4 -3.5 0.0 0.0 59 - 60 0 0 0.07 0.08
17 (3826, -34) -7.3 -18.1 0.0 0.0 38 (1589, -316) -4.7 -11.6 0.0 0.0 59 (6975, -316) 0.0 0.0 0.0 0.0 Webs
18 (4242, -34) -7.0 -17.3 0.0 0.0 39 (2004, -316) -5.7 -14.1 0.0 0.0 60 (7048, -316) 0.2 0.6 0.0 0.0 31 - 1 0.02 0.02 0 0.02
19 (4324, -34) -7.0 -17.1 0.0 0.0 40 (2086, -316) -5.9 -14.5 0.0 0.0 60 - 30 0.02 0.02 0 0.02
20 (4740, -34) -6.4 -15.7 0.0 0.0 41 (2502, -316) -6.6 -16.3 0.0 0.0 32 - 2 0.18 0 0.01 0.19
21 (4821, -34) -6.2 -15.3 0.0 0.0 42 (2583, -316) -6.7 -16.6 0.0 0.0 3 - 33 0 0.16 0.01 0.17

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F34 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
34 - 4 0.17 0 0.01 0.18
5 - 35 0 0.15 0.01 0.16
36 - 6 0.14 0 0.01 0.15
7 - 37 0 0.12 0.01 0.13
38 - 8 0.11 0 0.01 0.12
9 - 39 0 0.1 0.01 0.1
40 - 10 0.09 0.01 0.01 0.09
11 - 41 0.01 0.08 0.01 0.09
42 - 12 0.07 0.02 0 0.08
13 - 43 0.03 0.07 0 0.07
44 - 14 0.06 0.04 0 0.06
15 - 45 0.04 0.05 0 0.06
46 - 16 0.04 0.05 0 0.06
17 - 47 0.06 0.04 0 0.06
48 - 18 0.03 0.07 0 0.07
19 - 49 0.07 0.02 0 0.08
50 - 20 0.01 0.08 0.01 0.09
21 - 51 0.09 0.01 0.01 0.09
52 - 22 0 0.1 0.01 0.1
23 - 53 0.11 0 0.01 0.12
54 - 24 0 0.12 0.01 0.13
25 - 55 0.14 0 0.01 0.15
56 - 26 0 0.15 0.01 0.16
27 - 57 0.17 0 0.01 0.18
58 - 28 0 0.16 0.01 0.17
29 - 59 0.18 0 0.01 0.19

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
Truss F41

Environment Truss F41 Forces


Site Data Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
Elevation ASL [m] 10 Top Chord
Building Data 1-2 0 0 0.29 0.29
Wind Code AS/NZS 1170.2 2-3 0.1 0 0.29 0.37
Code AU 3-4 0.19 0 0.25 0.39
Building Function A 4-5 0.28 0 0.25 0.49
Importance Level 2 5-6 0.37 0 0.29 0.58
6-7 0.45 0 0.22 0.63
Annual prob. of exceed. - Wind 1:500
7-8 0.51 0 0.3 0.7
Annual prob. of exceed. - Snow 1:150
8-9 0.57 0 0.2 0.75
Roof Type Hip
9 - 10 0.62 0 0.31 0.81
Building Length [m] 19.8
7,074 mm 10 - 11 0.67 0 0.18 0.83
Building Width [m] 25.1
11 - 12 0.71 0 0.32 0.87
Avg. Roof Height [m] 6.3 1 2 3 4 5 6 7 8 9 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 26/27 28/29 30 12 - 13 0.74 0 0.16 0.87
Enclosed? Enclosed 13 - 14 0.75 0 0.33 0.9
14 - 15 0.77 0 0.14 0.87
For complete job environment details, refer to the job
15 - 16 0.77 0 0.33 0.9
Enviroments Report.
16 - 17 0.77 0 0.14 0.87
17 - 18 0.75 0 0.33 0.9
31/32 33/34 35/36 37/38 39/40 41/42 43/44 45/46 47/48 49/50 51/52 53/54 55/56 57/58 59/60
Load Summary 18 - 19 0.74 0 0.16 0.87
19 - 20 0.71 0 0.32 0.87
Load Value 20 - 21 0.67 0 0.18 0.83
Loaded Width (Actual) 439 21 - 22 0.62 0 0.31 0.81
Floor Dead Load (KPa) 0.63
Heel 348 mm BC 7,074 mm Heel 348 mm 22 - 23 0.57 0 0.2 0.75
Floor Live Load (KPa) 1.92 23 - 24 0.51 0 0.3 0.7
Floor Point Load (KPa) 1.80 24 - 25 0.45 0 0.22 0.63
Ceiling Dead Load (KPa) 0.15 25 - 26 0.37 0 0.29 0.58
Ceiling Live Load (KPa) 0.00 26 - 27 0.28 0 0.25 0.49
Ceiling Point Load (KPa) 1.10 27 - 28 0.19 0 0.25 0.39
28 - 29 0.1 0 0.29 0.37
29 - 30 0 0 0.29 0.29
Truss Summary Bottom Chord
31 - 32 0 0 0.07 0.08
Item Value
32 - 33 0 0.07 0.18 0.25
Steel 6050-G550-0.95
33 - 34 0 0.14 0.27 0.41
Width [m] 7.1 Reactions 34 - 35 0 0.21 0.27 0.48
Height [m] 0.3 35 - 36 0 0.27 0.22 0.49
Loaded Width 439 Reaction @ Node 32 Reaction @ Node 59 36 - 37 0 0.33 0.22 0.55
Purlin Spacing 250 Max. Ult 5,882 Max. Ult 5,882 37 - 38 0 0.38 0.2 0.58
Batten Spacing 600 Min. Ult 1,082 Min. Ult 1,082 38 - 39 0 0.42 0.2 0.63
BC Span [m] 7.1 39 - 40 0 0.46 0.18 0.64
Steel [m] 25.4 40 - 41 0 0.49 0.18 0.67
Weight [kg] 33.6 41 - 42 0 0.52 0.15 0.67
Max. Deflection Up 0.649 42 - 43 0 0.54 0.16 0.69
Max. Deflection Down -19.720 43 - 44 0 0.55 0.12 0.67
Max CR - Top Chord 0.90 44 - 45 0 0.57 0.16 0.68
Max CR - Bottom Chord 0.69 45 - 46 0 0.57 0.1 0.65
Status Pass 46 - 47 0 0.57 0.16 0.68
47 - 48 0 0.55 0.12 0.67
Nodes / Deflections 48 - 49 0 0.54 0.16 0.69
BC Deflections Summary 49 - 50 0 0.52 0.15 0.67
Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint Node Position (x,y) DL LL Wind Snow Joint
1 (26, -34) 0.3 0.7 0.0 0.0 22 (5237, -34) -5.8 -14.2 0.0 0.0 43 (2999, -316) -7.8 -19.1 0.0 0.0 50 - 51 0 0.49 0.18 0.67
Maximum Limit Ratio 51 - 52 0 0.46 0.18 0.64
2 (264, -34) -0.6 -1.5 0.0 0.0 23 (5318, -34) -5.6 -13.7 0.0 0.0 44 (3080, -316) -7.8 -19.3 0.0 0.0
Dead Load -8.01 22.65 0.35 52 - 53 0 0.42 0.2 0.63
3 (346, -34) -0.9 -2.3 0.0 0.0 24 (5734, -34) -4.4 -10.8 0.0 0.0 45 (3496, -316) -8.0 -19.7 0.0 0.0
Live Load -19.72 27.18 0.73 53 - 54 0 0.38 0.2 0.58
4 (761, -34) -2.4 -6.0 0.0 0.0 25 (5816, -34) -4.1 -10.1 0.0 0.0 46 (3578, -316) -8.0 -19.7 0.0 0.0
Dead Load 0.00 0.00 0.00 54 - 55 0 0.33 0.22 0.55
5 (843, -34) -2.7 -6.7 0.0 0.0 26 (6231, -34) -2.7 -6.7 0.0 0.0 47 (3994, -316) -7.8 -19.3 0.0 0.0
6 (1259, -34) -4.1 -10.1 0.0 0.0 27 (6313, -34) -2.4 -6.0 0.0 0.0 48 (4075, -316) -7.8 -19.1 0.0 0.0 55 - 56 0 0.27 0.22 0.49
7 (1340, -34) -4.4 -10.8 0.0 0.0 28 (6728, -34) -0.9 -2.3 0.0 0.0 49 (4491, -316) -7.3 -17.9 0.0 0.0 56 - 57 0 0.21 0.28 0.48
8 (1756, -34) -5.6 -13.7 0.0 0.0 29 (6810, -34) -0.6 -1.5 0.0 0.0 50 (4572, -316) -7.2 -17.6 0.0 0.0 57 - 58 0 0.14 0.28 0.41
9 (1837, -34) -5.8 -14.2 0.0 0.0 30 (7048, -34) 0.3 0.7 0.0 0.0 51 (4988, -316) -6.4 -15.7 0.0 0.0 58 - 59 0 0.07 0.18 0.25
10 (2253, -34) -6.7 -16.5 0.0 0.0 31 (26, -316) 0.3 0.6 0.0 0.0 52 (5070, -316) -6.2 -15.2 0.0 0.0 59 - 60 0 0 0.07 0.08
Webs
11 (2335, -34) -6.9 -16.9 0.0 0.0 32 (99, -316) 0.0 0.0 0.0 0.0 53 (5485, -316) -5.1 -12.6 0.0 0.0
12 (2750, -34) -7.5 -18.5 0.0 0.0 33 (513, -316) -1.5 -3.7 0.0 0.0 54 (5567, -316) -4.9 -12.0 0.0 0.0 31 - 1 0.02 0.02 0 0.02
13 (2832, -34) -7.6 -18.8 0.0 0.0 34 (594, -316) -1.9 -4.6 0.0 0.0 55 (5983, -316) -3.6 -8.8 0.0 0.0 60 - 30 0.02 0.02 0 0.02
14 (3248, -34) -7.9 -19.6 0.0 0.0 35 (1010, -316) -3.3 -8.1 0.0 0.0 56 (6064, -316) -3.3 -8.1 0.0 0.0 32 - 2 0.19 0 0.01 0.2
15 (3329, -34) -8.0 -19.6 0.0 0.0 36 (1091, -316) -3.6 -8.8 0.0 0.0 57 (6480, -316) -1.9 -4.6 0.0 0.0 3 - 33 0 0.18 0.01 0.19
16 (3745, -34) -8.0 -19.6 0.0 0.0 37 (1507, -316) -4.9 -12.0 0.0 0.0 58 (6561, -316) -1.5 -3.7 0.0 0.0 34 - 4 0.19 0 0.01 0.2
17 (3826, -34) -7.9 -19.6 0.0 0.0 38 (1589, -316) -5.1 -12.6 0.0 0.0 59 (6975, -316) 0.0 0.0 0.0 0.0 5 - 35 0 0.17 0.01 0.17
18 (4242, -34) -7.6 -18.8 0.0 0.0 39 (2004, -316) -6.2 -15.2 0.0 0.0 60 (7048, -316) 0.3 0.6 0.0 0.0 36 - 6 0.16 0 0.01 0.16
19 (4324, -34) -7.5 -18.5 0.0 0.0 40 (2086, -316) -6.4 -15.7 0.0 0.0 7 - 37 0 0.13 0.01 0.14
20 (4740, -34) -6.9 -16.9 0.0 0.0 41 (2502, -316) -7.2 -17.6 0.0 0.0 38 - 8 0.12 0 0.01 0.13
21 (4821, -34) -6.7 -16.5 0.0 0.0 42 (2583, -316) -7.3 -17.9 0.0 0.0 9 - 39 0 0.1 0.01 0.1

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.
F41 (continued)

Forces
Nodes Compr. Index
Tens. Index Bend. Index CR Ratio
40 - 10 0.09 0.01 0.01 0.1
11 - 41 0.01 0.08 0.01 0.09
42 - 12 0.07 0.02 0 0.08
13 - 43 0.03 0.07 0 0.07
44 - 14 0.06 0.04 0 0.06
15 - 45 0.04 0.05 0 0.06
46 - 16 0.04 0.05 0 0.06
17 - 47 0.06 0.04 0 0.06
48 - 18 0.03 0.07 0 0.07
19 - 49 0.07 0.02 0 0.08
50 - 20 0.01 0.08 0.01 0.09
21 - 51 0.09 0.01 0.01 0.1
52 - 22 0 0.1 0.01 0.1
23 - 53 0.12 0 0.01 0.13
54 - 24 0 0.13 0.01 0.14
25 - 55 0.16 0 0.01 0.16
56 - 26 0 0.17 0.01 0.17
27 - 57 0.19 0 0.01 0.2
58 - 28 0 0.18 0.01 0.19
29 - 59 0.19 0 0.01 0.2

Job Name 1177-01


Disclaimer
This engineering report generated from the Scottsdale Construction Systems Pty Ltd (Scottsdale) engineering software (Engineering Software) is derived from the designer’s Job Number
inputs which have been used in the engineering calculations conducted by the Engineering Software. The designer acknowledges that it is solely responsible for ensuring that: Detailer
1. the design matches the building plans and complies with all applicable building codes, standards and statutory requirements; and
2. data relating to the design input in the Engineering Software and data that appears in the engineering reports exactly matches that of the Design. Company
Date 16 11 2022
To the maximum extent permitted by law, where any issue arises as a consequence of or in connection with anything that is the designer’s responsibility, Scottsdale disclaims any
Project File 1177-01 V3.sdp
and all liability relating to the issue and the designer fully releases Scottsdale from any claims made in connection with the issue.

You might also like