Scribd
Upload
42 views3 pages

Epdm Rubber Gasket Hydrotech

The document discusses non-metallic gasket materials that are supplied to various industries. It lists 11 different elastomeric materials commonly used in gaskets, including neoprene, EPDM, viton, SBR, and NBR. It provides brief descriptions of the chemical resistance and typical uses of some of the materials, such as neoprene being used to seal oils and gasoline, EPDM being used for hot and cold water and steam, and WRAS approved EPDM being suitable for potable water applications. Full face and flat ring gasket styles are shown and described.

Uploaded by

musafir mufi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views3 pages

Epdm Rubber Gasket Hydrotech

The document discusses non-metallic gasket materials that are supplied to various industries. It lists 11 different elastomeric materials commonly used in gaskets, including neoprene, EPDM, viton, SBR, and NBR. It provides brief descriptions of the chemical resistance and typical uses of some of the materials, such as neoprene being used to seal oils and gasoline, EPDM being used for hot and cold water and steam, and WRAS approved EPDM being suitable for potable water applications. Full face and flat ring gasket styles are shown and described.

Uploaded by

musafir mufi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

NON-METALLIC GASKETS

ELASTOMERIC GASKET MATERIALS


Elastomeric gaskets with different chemical and mechanical properties are being
supplied to oil and petrochemical industries, sewerage & chilled water sector and
exclusively for Potable water applications.

There are varieties of elastomeric gaskets, gasket sheets/rolls with different sizes
which are produced against the international standards such as ASME B16.21, BS EN
1514-1, JIS etc.

The materials available with us are as follows:-

1. Neoprene
2. Neoprene W/ Cotton Reinforcement
3. EPDM (Ethylene Propelene Diene Monomer)
4. EPDM 2 PLY W/ Cotton Reinforcement
5. EPDM (WRAS Approved) for Potable Water Applications W/ 2 Ply Cloth Reinforcement.
6. NBR (Nitrile Butadiene Rubber) / Buna-N
7. Butyl
8. Viton (FPM)
9. Silicon
10. SBR (Styrene Butadiene Rubber)
11. Kalrez (FFKM)
NON-METALLIC GASKETS

Full Face Gaskets for Flat Face Flanges Flat Ring Gaskets for Raised Face Flanges

NEOPRENE A good general purpose poly-chloroprene sheet. . For Sealing oils, gasoline and petroleum solvents.

EPDM Ethylene propylene polymer displaying excellent For Hot and cold water, steam.
resistance to ozone,oxygen,and water.

VITON This fluoro-elastomer sheet displays unusual For oils, aliphatic hydrocarbons, air, chlorine to
resistance to oils and chemicals For sealing oils, 107deg.c.,hot gases, dry steam to 149 deg.c,
gasoline and petroleum solvents. most acids, ammonia and gasoline.

SBR Good abrasion resistance and good aging stability. Styrene-butane rubber is used in gasketed
-plate heat exchangers. It is used at moderate
temperature up to 85deg C.

WRAS APPROVED EPDM Rubber is a Gasket For Food / Drink, Weather / Ozone, This Product
EPDM
Material suitable for use with potable water is REACH, RoHS, PAH and CE Compliant.
(WRAS approved) Applications with 2 ply cotton reinforcement. for Insulation of Dissimilar Flanges.
Also available in Insulation Kits.

NBR This form of synthetic rubber is unusual in being It is used in the automotive and aeronautical
generally resistant to oil, fuel, and other industry, Nitrile rubber is generally resistant to
chemicals aliphatic hydrocarbons

You might also like