Data sheet

Cisco public

Cisco 10GBASE SFP+

Modules

© 2023 Cisco and/or its affiliates. All rights reserved. Page 1 of 22

Contents
Product overview 3
Features and benefits 3
Cisco SFP-10G-T-X module 4
Cisco SFP-10G-SR-S module (S-Class) 4
Cisco SFP-10G-SR module 4
Cisco SFP-10G-SR-X module 5
Cisco SFP-10G-SR-I module 5
Cisco SFP-10G-LRM module 5
Cisco FET-10G module 5
Cisco SFP-10G-LR-S module (S-Class) 5
Cisco SFP-10G-LR module 5
Cisco SFP-10G-LR-X module 6
Cisco SFP-10G-LR10-I module 6
Cisco SFP-10G-ER-S module (S-Class) 7
Cisco SFP-10G-ER module 7
Cisco SFP-10G-ER-I module 7
Cisco SFP-10G-ZR-S module (S-Class) 7
Cisco SFP-10G-ZR module 7
Cisco SFP-10G-ZR-I module 8
Cisco SFP+ Twinax copper cables 8
Cisco SFP+ Active optical cables 9
Platform support 9
Product specifications 10
Warranty 19
Cisco environmental sustainability 19
Ordering information 20
Regulatory and standards compliance 21
Cisco Capital 22
Next steps 22
Document history 22

© 2023 Cisco and/or its affiliates. All rights reserved. Page 2 of 22

A broad range of industry-compliant SFP+ modules for 10 Gigabit Ethernet deployments
in diverse networking environments.

Product overview
The Cisco ® 10GBASE SFP+ modules (Figure 1) give you a wide variety of 10 Gigabit Ethernet connectivity
options for data center, enterprise wiring closet, and service provider transport applications.

Figure 1.
Cisco 10GBASE SFP+ modules

Features and benefits

Cisco SFP+ modules offer the following features and benefits.
● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to
power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same
link
● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is
certified and tested by Cisco

© 2023 Cisco and/or its affiliates. All rights reserved. Page 3 of 22

Cisco SFP-10G-T-X module
The Cisco 10GBASE-T module (Figure 2) offers connectivity options at the following data rates:
100M/1G/10Gbps. It has the SFP+ form factor and an RJ-45 interface so that CAT5e/CAT6A/CAT7 cables can
be used to connect to end points with embedded 10GBASE-T ports. They are suitable for distances up to 30
meters and offers a cost-effective way to connect within racks and across adjacent racks.

Figure 2.
Cisco SFP+ 10GBASE-T module with RJ-45 connector

Table 1, details the specifications for the SFP-10G-T-X module, including cable type, distance, and data rates
supported.

Table 1. SFP-10G-T-X cabling specifications

Cisco PIDs Speeds Cable Type Distance Max. Power Consumption (W)

SFP-10G-T-X 10Gbps Cat6A/Cat7 or better Up to 30 meters 2.5W

SFP-10G-T-X 100M/1Gbps Cat5e/Cat6A/Cat7 or better Up to 100 meters 1.0W

Cisco SFP-10G-SR-S module (S-Class)

The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data
Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths
are possible. Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does
not support FCoE.

Cisco SFP-10G-SR module

The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface
(FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible.
Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 4 of 22

Cisco SFP-10G-SR-X module
The Cisco SFP-10G-SR-X is a multirate * 10GBASE-SR, 10GBASE-SW and OTU2/OTU2e module for extended
operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface
(FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible.
Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
*
Except for version 1, which supports only 10GBASE-SR.

Cisco SFP-10G-SR-I module

The Cisco SFP-10G-SR-I is a multirate 10GBASE-SR, 10GBASE-SW and OTU2/2e module for industrial
operating temperature range. This module also supports CPRI datarate options 3, 4, 5, 6, 7, 7a, 8. It supports a
link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using
2000MHz*km MMF(OM3), up to 300m link lengths are possible. Using 4700MHz *km MMF (OM4), up to 400m
link lengths are possible.

Cisco SFP-10G-LRM module

The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface
(FDDI) grade Multimode Fiber (MMF). To make sure that specifications are met over FDDI-grade, OM1 and OM2
fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch
cord is required for applications over OM3 or OM4. For additional information on mode conditioning patch cord
requirements please see:
https://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.

The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard Single-Mode Fiber
(SMF, G.652).

Cisco FET-10G module

The Cisco FET-10G Fabric Extender Transceiver supports link lengths up to 100m on laser -optimized OM3 or
OM4 multimode fiber. It is supported on fabric links from a Nexus 2000 to a Cisco parent switch only. Note this
product is not orderable individually. For more information refer to Nexus 2000 datasheet:
https://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78 -507093.html.

Cisco SFP-10G-LR-S module (S-Class)

The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF)
(G.652). SFP-10G-LR-S does not support FCoE.

Cisco SFP-10G-LR module

The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber
(SMF, G.652).

© 2023 Cisco and/or its affiliates. All rights reserved. Page 5 of 22

Cisco SFP-10G-LR-X module
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended
operating temperature range. It supports a link length of 10 kilometers on standard Single -Mode Fiber
(SMF, G.652).

Cisco SFP-10G-LR10-I module

The Cisco SFP-10G-LR10-I supports a link length of 10 kilometers on standard Single-Mode Fiber
(SMF, G.652). The SFP-10G-LR10-I is for industrial operating temperature range. The SFP-10G-LR10-I also
supports CPRI datrates options 3, 4, 5, 6, 7, 7a, 8.

Cisco SFP-10G-BXD-I and SFP-10G-BXU-I for 10Km (single-fiber

bidirectional applications)
The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard
SMF with an operating transmission range up to 10 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the
two devices, as depicted in Figure 3. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm
signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. Note in
Figure 3 the presence of a Wavelength-Division Multiplexing (WDM) splitter integrated into the SFP to split the
1270-nm and 1330-nm light paths. This module also supports CPRI datarate options 3, 4, 5, 6, 7, 7a, 8. *

Figure 3.
Bidirectional transmission of a single strand of SMF

The SFP-10G-BXD-I and SFP-10G-BXU-I SFPs also support Digital Optical Monitoring (DOM) functions
according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user
the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power,
temperature, laser bias current, and transceiver supply voltage.
* Version -02 of SFP-10G-BXD-I and SFP-10G-BXU-I supports the CPRI rates.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 6 of 22

Cisco SFP-10G-ER-S module (S-Class)
The Cisco 10GBASE-ER module supports a link length of up to 40 kilometers on SMF (G.652). SFP-10G-ER-S
does not support FCoE.

Cisco SFP-10G-ER module

The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber
(SMF, G.652).

Cisco SFP-10G-ER-I module

The Cisco 10GBASE-ER Industrial Temperature Module supports a link length of up to 40 kilometers on
standard Single-Mode Fiber (SMF, G.652). The SFP-10G-ER-I for Industrial Operating Temperature Range is a
multirate 10GBASE-ER, 10GBASE-EW and OTU2/2e module.

Cisco SFP-10G-BX40D-I and SFP-10G-BX40U-I (for 40Km single-fiber

bidirectional applications)
The Cisco SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BX40D-I device is always connected to a SFP-10G-BX40U-I device with a single strand of

standard SMF with an operating transmission range up to 40 km.

The communication over a single strand of fiber is achieved by separating the transmission wavele ngth of the
two devices. SFP-10G-BX40D-I transmits a 1330-nm channel and receives a 1270-nm signal. The SFP-10G-
BX40U-I transmits at a 1270-nm wavelength and receives a 1330-nm signal.

The SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs support Digital Optical Monitoring (DOM) functions
according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user
the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power,
temperature, laser bias current, and transceiver supply voltage.

Cisco SFP-10G-ZR-S module (S-Class)

The Cisco 10GBASE-ZR module supports link lengths of up to about 80 kilometers on standard SMF (G.652).
This interface is not specified as part of the 10 Gigabit Ethernet standards and is, instead, built according to
Cisco specifications. SFP-10G-ZR-S does not support FCoE.

Cisco SFP-10G-ZR module

The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link
lengths of up to about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface is not
specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 7 of 22

Cisco SFP-10G-ZR-I module
The Cisco SFP-10G-ZR-I is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module for industrial
operating temperature range. The SFP-10G-ZR-I has a limiting electrical interface receiver, which does not
require EDC PHY on the host board, it can be plugged into any SFP+ port. It supports link lengths of up to 70
kilometers on standard Single-Mode Fiber (SMF, G.652), assuming a fiber chromatic dispersion of
20 ps/(nm*km). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built
according to Cisco specifications. The SFP-10G-ZR-I has a cold start at -40⁰C; the transceiver will be
operational except optical traffic is not supported from -40⁰ to -28⁰C, all other low speed features (DOM, I2C,
etc.) are operational. The module is fully operational from -28⁰C to 85⁰C.

Cisco SFP+ Twinax copper cables

Cisco SFP+ Copper Twinax (Figure 4) direct-attach cables are suitable for very short distances and offer a
cost-effective way to connect within racks and across adjacent racks. Cisco offers passive Twinax cables in
lengths of 1, 1.5, 2, 2.5, 3, 4 and 5 meters, and active Twinax cables in lengths of 7 and 10 meters.

Figure 4.
Cisco direct-attach twinax copper cable assembly with SFP+ connectors

© 2023 Cisco and/or its affiliates. All rights reserved. Page 8 of 22

Cisco SFP+ Active optical cables
Cisco SFP+ Active Optical Cables (Figure 5) are direct-attach fiber assemblies with SFP+ connectors. They are
suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent
racks. Cisco offers Active Optical Cables in lengths of 1, 2, 3, 5, 7, and 10 meters.

Figure 5.
Cisco direct-attach active optical cables with SFP+ connectors

Platform support
Cisco SFP+ modules are supported on a wide range of Cisco switches and routers *:

Table 2. Cisco Platforms

● 7600 Series Router ● Catalyst 4500 and 4500-X Series Switches

● ASR 901 ● CRS Router

● ASR 903 ● MDS 9000

● ASR 1000 Series Router ● ME 4500

● ASR 9000 Series Router ● ME 4900NCS 6000 Series Router

● ASR 9000v Series Router ● Nexus 2000, 3000, and 4000 Series Switches
● Catalyst 2350 and 2360 Series Switches ● Nexus 9000 and 9500 (modular) Series Switches

● Catalyst 2960-S, 2960-X, and 2960-XR Series Switches ● RF Gateway Series

● Catalyst 3100 Blade Switches ● SCE 8000

● Catalyst 3560, 3560-E, and 3560-X Series Switches ● Shared Port Adapter (SPA)
● Catalyst 3750, 3750-E, and 3750-X Series Switches ● Unified Computing System (UCS) Switches
● Catalyst 3850 Series Switches

*
Not all devices listed support every module. For details about which modules run in which devices and other compatibility inf ormation,
refer to the document “Cisco 10 Gigabit Ethernet Transceiver Modules Compatibility Matrix”:
https://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 9 of 22

Additional platforms may continually be added; please check the compatibility matrix for the latest information
and for the Cisco compatible operating system for each platform.

Connectors: Dual LC/PC connector (-SR, -LRM, -LR, -ER, -ZR and FET-10G).

Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with
APC connectors are not supported. All cables and cable assemblies used must be compliant with the
standards specified in the standards section.

Product specifications
Table 3 provides cabling specifications for the SFP+ modules.

Table 3. SFP+ port cabling specifications

SFP+ Wavelength (nm) Cable Type Core Size Modal Bandwidth Cable
(Microns) (MHz *km)*3 Distance *1

SFP-10G-SR-Sa 850 MMF 62.5 160 (FDDI) 26m

SFP-10G-SR 62.5 200 (OM1) 33m
SFP-10G-SR-X 50.0 400 66m
SFP-10G-SR-I a
50.0 500 (OM2) 82m
50.0 2000 (OM3) 300m

50.0 4700 (OM4) 400m

50.0 4700 (OM5) 400m

SFP-10G-LRM 1310 MMF 62.5 500 220m

SMF 50.0 400 100m

50.0 500 220m

G.652 - 300m

FET-10G 850 MMF 50.0 500 (OM2) 25m

50.0 2000 (OM3) 100m
50.0 4700 (OM4) 100m

50.0 4700 (OM5) 100m

SFP-10G-LR-Sa 1310 SMF G.652 - 10km

SFP-10G-LR
SFP-10G-LR-X
SFP-10G-LR10-Ib

SFP-10G-BXD-I 1330 SMF G.652 - 10km b

SFP-10G-BXU-I 1270 SMF G.652 - 10km b

SFP-10G-ER-S*4a 1550 SMF G.652 - 40km *2

SFP-10G-ER*4
SFP-10G-ER-I*4

© 2023 Cisco and/or its affiliates. All rights reserved. Page 10 of 22

 SFP+ Wavelength (nm) Cable Type Core Size Modal Bandwidth Cable
(Microns) (MHz *km)*3 Distance *1

SFP-10G-BX40D-I*6 1330 SMF G.652 - 40km

SFP-10G-BX40U-I*6 1270 SMF G.652 - 40km

SFP-10G-ZR-S*5a 1550 SMF G.652 - 80km

SFP-10G-ZR *5

SFP-10G-ZR-I*5a 1550 SMF G.652 - 70km

SFP-H10GB-CU1Mc - Twinax cable, - - 1m

passive, 30AWG
cable assembly

SFP-H10GB-CU1-5M - Twinax cable, - - 1.5m

passive, 30AWG
cable assembly

SFP-H10GB-CU2M - Twinax cable, - - 2m

passive, 30AWG
cable assembly

SFP-H10GB-CU2-5M - Twinax cable, - - 2.5m

passive, 30AWG
cable assembly

SFP-H10GB-CU3Mc - Twinax cable, - - 3m

passive, 30AWG
cable assembly

SFP-H10GB-CU4M - Twinax cable, - - 4m

passive, 24AWG
or 26AWG cable
assembly

SFP-H10GB-CU5Mc - Twinax cable, - - 5m

passive, 24AWG
or 26AWG cable
assembly

SFP-H10GB-ACU7M - Twinax cable, - - 7m

active, 30 AWG
cable assembly

SFP-H10GB-ACU10M - Twinax cable, - - 10m

active, 28 AWG
cable assembly

SFP-10G-AOC1M - Active Optical - - 1m

Cable assembly

SFP-10G-AOC2M - Active Optical - - 2m

Cable assembly

SFP-10G-AOC3M - Active Optical - - 3m

Cable assembly

© 2023 Cisco and/or its affiliates. All rights reserved. Page 11 of 22

 SFP+ Wavelength (nm) Cable Type Core Size Modal Bandwidth Cable
(Microns) (MHz *km)*3 Distance *1

SFP-10G-AOC5M - Active Optical - - 5m

Cable assembly

SFP-10G-AOC7M - Active Optical - - 7m

Cable assembly

SFP-10G-AOC10M - Active Optical - - 10m

Cable assembly

*
1 Minimum cabling distance for -SR, -LRM, -LR, -ER modules is 2m, according to the IEEE 802.3ae.
*
2 Links longer than 30km are considered engineered links as per IEEE 802.3ae.

*
3 Specified at transmission wavelength.

*
4 Requires 5 dB 1550nm fixed loss attenuator for < 20km. Attenuator is available as a spare. The part number is 15216 ATT LC 5=.
*
5 Requires 15dB attenuator if Link Distance < 5km.

Requires 10dB attenuator if Link Distance is between 5km and 25km.

Requires 5dB attenuator if Link Distance is between 25km and 45km.

*
6 Requires 15dB attenuator if Link Distance < 5km.

Requires 10dB attenuator if Link Distance is between 5km and 15km.

Requires 5dB attenuator if Link Distance is between 15km and 25km.

Attenuator is available as a spare. The part numbers:

● 5dB - 15216 ATT LC 5=
● 10dB - 15216 ATT LC 10=
● 15dB - 15216 ATT LC 15=

a - No FCoE support.

b - Links up to 15 km are supported as engineered links as long as channel insertion loss < 6.2 dB.

c - Only Version -02 and later of this DAC cable is qualified on all Cisco platforms.

Table 4 lists the main optical characteristics for the SFP+ modules.

Table 4. Optical transmit and receive specifications

Product Type Transmit Power (dBm) * Receive Power (dBm) * Transmit and
Receive
Wavelength (nm)
Maximum Minimum Maximum Minimum

SFP-10G-SR-S 10GBASE-SR -1.2 ** -7.3 -1.0 -9.9 840 to 860

850nm MMF
SFP-10G-SR

SFP-10G-SR-X 10GBASE-SR, -1.2 ** -7.3 -1.0 -9.9 840 to 860

10GBASE-SW and
SFP-10G-SR-I OTU2e 850nm
MMF

© 2023 Cisco and/or its affiliates. All rights reserved. Page 12 of 22

 Product Type Transmit Power (dBm) * Receive Power (dBm) * Transmit and
Receive
Wavelength (nm)
Maximum Minimum Maximum Minimum

SFP-10G-LRM 10GBASE-LRM 0.5 -6.5 0.5 -8.4 (in 1260 to 1355

1310nm MMF and average)
SMF and -6.4
(in OMA) ***

FET-10G FET-10G 850nm -1.3 -8 -1 -9.9 840 to 860

MMF

SFP-10G-LR-S 10GBASE-LR 0.5 -8.2 0.5 -14.4 1260 to 1355

1310nm SMF
SFP-10G-LR

SFP-10G-LR-X 10GBASE-LR, 0.5 -8.2 0.5 -14.4 1260 to 1355

10GBASE-LW and
OTU2e 1310nm
SMF

SFP-10G-LR10-I 10GBASE-LR, 0.5 -8.2 0.5 -14.4 1260 to 1355

CPRI 1310 SMF

SFP-10G-BXD-I 10G-SFP 0.5 -8.2 0.5 -14.4 1320 to 1340 (Tx)

Bidirectional for
10km 1260 to 1280 (Rx)

SFP-10G-BXU-I 10G-SFP 0.5 -8.2 0.5 -14.4 1260 to 1280 (Tx)

Bidirectional for
10km 1320 to 1340 (Rx)

SFP-10G-ER-S 10GBASE-ER 4.0 -4.7 -1 -15.8 1530 to 1565

1550nm SMF
SFP-10G-ER

SFP-10G-ER-I

SFP-10G-BX40D-I 10G-SFP 4.5 -2.7 -9 -21.2 1320 to 1340 (Tx)

Bidirectional for
40km 1260 to 1280 (Rx)

SFP-10G-BX40U-I 10G-SFP 4.5 -2.7 -9 -21.2 1260 to 1280 (Tx)

Bidirectional for
40km 1320 to 1340 (Rx)

SFP-10G-ZR-S 10GBASE-ZR 4.0 0 -7 -24 1530 to 1565

1550nm SMF
SFP-10G-ZR
SFP-10G-ZR-I

*
Transmitter and receiver power is in average, unless specified.
**
The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by
IEC 60825-1: 2001.

***
Both average and OMA specifications must be met simultaneously.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 13 of 22

Table 5 details optical specifications for the SFP-10G-ZR modules.

Table 5. SFP-10G-ZR, SFP-10G-ZR-S optical parameters

Parameter Symbol Minimum Typical Maximum Units Notes and Conditions

Transmitter

Transmitter wavelength 1530 1565 nm

Side-mode suppression SMSR 30 dB

ratio

Transmitter extinction 9 dB
ratio

Transmitter optical Pout 0 4.0 dBm Average power coupled into single-mode
output power fiber

Receiver

Receiver optical input 1260 1565 nm Receiver Sensitivity specified over 1530-
wavelength 1565nm only, with 3dB degradation
permitted from 1260-1530nm

Receiver damage +5 dBm

threshold

Receiver Overload -7 dBm

Receiver performance at 10GE LAN and 10GE WAN rates, non-FEC application

Receiver sensitivity -24 dBm At BER=1E-12 with PRBS31 and 10GE

frame

Chromatic Dispersion 3 dB
Penalty@ 1600 ps/nm*

Receiver performance at OTU2/OTU2e rates, FEC application

Receiver sensitivity -27 dBm At Pre-FEC BER=1E-5 for GFEC and Pre-
FEC BER=7E-4 for EFEC with PRBS31 and
OTU2 frame

Chromatic Dispersion 3 dB
Penalty@ 1300 ps/nm

*
Maximum chromatic dispersion for SFP-10G-ZR and SFP-10G-ZR-S is 1600 ps/nm.

Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter
distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid
overloading and damaging the receiver.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 14 of 22

Table 6. SFP-10G-ZR-I optical parameters

Parameter Symbol Minimum Typical Maximum Units Notes and Conditions

Transmitter

Transmitter wavelength 1530 1565 nm

Side-mode suppression ratio SMSR 30 dB

Transmitter extinction ratio 9 dB

Transmitter optical output Pout 0 4.0 dBm Average power coupled into
power single-mode fiber

Receiver

Receiver optical input 1260 1565 nm Receiver Sensitivity specified over

wavelength 1530-1565nm only, with 3dB
degradation permitted from
1260-1530nm

Receiver damage threshold +5 dBm

Receiver Overload -7 dBm

Receiver performance at 10GE LAN and 10GE WAN rates, non -FEC application

Receiver sensitivity -24 dBm At BER=1E-12 with PRBS31 and

10GE frame

Chromatic Dispersion Penalty@ 3 dB

1400 ps/nm*

Receiver performance at OTU2/OTU2e rates, FEC application

Receiver sensitivity -27 dBm At Pre-FEC BER=1E-5 for GFEC

and Pre-FEC BER=7E-4 for EFEC
with PRBS31 and OTU2 frame

Chromatic Dispersion Penalty@ 3 dB

1300 ps/nm

*
Maximum chromatic dispersion for SFP-10G-ZR-I is 1400 ps/nm.

Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter
distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid
overloading and damaging the receiver.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 15 of 22

Table 7 describes the bail latch color code for each type of optical SFP+ module.

Table 7. SFP+ optical modules color code

Product Bail Latch Color

SFP-10G-T-X Golden/Yellow

SFP-10G-SR-S Beige
SFP-10G-SR

SFP-10G-SR-X
SFP-10G-SR-I

SFP-10G-LRM Orange

FET-10G Brown

SFP-10G-LR-S Blue
SFP-10G-LR

SFP-10G-LR-X
SFP-10G-LR10-I

SFP-10G-BXD-I Blue
SFP-10G-BXU-I

SFP-10G-ER-S Red
SFP-10G-ER
SFP-10G-ER-I

SFP-10G-BX40D-I Red
SFP-10G-BX40U-I

SFP-10G-ZR-S Green
SFP-10G-ZR

SFP-10G-ZR-I

SFP-H10GB-CU1M Beige

SFP-H10GB-CU1-5M Black

SFP-H10GB-CU2M Brown

SFP-H10GB-CU2-5M Yellow

SFP-H10GB-CU3M Orange

SFP-H10GB-CU4M Green

SFP-H10GB-CU5M Gray

SFP-H10GB-ACU7M Blue

© 2023 Cisco and/or its affiliates. All rights reserved. Page 16 of 22

 Product Bail Latch Color

SFP-H10GB-ACU10M Red

SFP-10G-AOC1M Beige

SFP-10G-AOC2M Brown

SFP-10G-AOC3M Orange

SFP-10G-AOC5M Gray

SFP-10G-AOC7M Blue

SFP-10G-AOC10M Red

Table 8 provides the maximum power consumption and operating temperature range ratings per SFP+ module.

Table 8. SFP+ modules power consumption

Product Power Consumption (W) Operating Temperature Range

SFP-10G-T-X 2.5W EXT

SFP-10G-SR-S 1 COM
SFP-10G-SR

SFP-10G-SR-I 1 IND

SFP-10G-SR-X 1 EXT

SFP-10G-LRM 1 COM

FET-10G 1 COM

SFP-10G-LR-S 1 COM
SFP-10G-LR

SFP-10G-LR-X 1 EXT

SFP-10G-LR10-I 1 IND

SFP-10G-BXD-I 1 IND
SFP-10G-BXU-I

SFP-10G-ER-S 1.5 COM

SFP-10G-ER

SFP-10G-ER-I 1.5 IND

SFP-10G-BX40D-I 1.2 IND

SFP-10G-BX40U-I

© 2023 Cisco and/or its affiliates. All rights reserved. Page 17 of 22

 Product Power Consumption (W) Operating Temperature Range

SFP-10G-ZR-S 1.5 COM

SFP-10G-ZR

SFP-10G-ZR-I 2 IND*

SFP-H10GB-CU1M 0.1 COM

SFP-H10GB-CU1-5M 0.1 COM

SFP-H10GB-CU2M 0.1 COM

SFP-H10GB-CU2-5M 0.1 COM

SFP-H10GB-CU3M 0.1 COM

SFP-H10GB-CU4M 0.1 COM

SFP-H10GB-CU5M 0.1 COM

SFP-H10GB-ACU7M 1 COM

SFP-H10GB-ACU10M 1 COM

SFP-10G-AOC1M 1 COM

SFP-10G-AOC2M 1 COM

SFP-10G-AOC3M 1 COM

SFP-10G-AOC5M 1 COM

SFP-10G-AOC7M 1 COM

SFP-10G-AOC10M 1 COM

*
The SFP-10G-ZR-I has a cold start at -40⁰C, the transceiver will be operational except optical traffic is not supported from -40⁰C to -
28⁰C, all other low speed features (DOM, I2C, etc.) are operational. The module is fully operational -28⁰C to 85⁰C.

Dimensions

Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Cisco SFP+ connectors typically weigh 75 grams or less.
Environmental Conditions and Power Requirements
Operating temperature range:
● Commercial temperature range (COM): 0 to 70°C (32 to 158°F)
● Extended temperature range (EXT): -5 to 85°C (23 to 185°F)
● Industrial temperature range (IND): -40 to 85°C (-40 to 185°F)
● Storage temperature range: -40 to 85°C (-40 to 185°F)

© 2023 Cisco and/or its affiliates. All rights reserved. Page 18 of 22

Warranty
● Standard warranty: 5 years
● Expedited replacement available via a Cisco SMARTnet® Service support contract

Cisco environmental sustainability

Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions,
operations, and extended operations or supply chain is provided in the “Envir onment Sustainability” section of
Cisco’s Corporate Social Responsibility (CSR) Report.

Reference links to information about key environmental sustainability topics (mentioned in the “Environment
Sustainability” section of the CSR Report) are provided in the following table:

Sustainability Topic Reference

General Information on product-material-content laws and Materials

regulations

Information on electronic waste laws and regulations , WEEE Compliance

including our products, batteries and packaging

Information on product takeback and resuse program Cisco Takeback and Reuse Program

Sustainability Inquiries Contact: [email protected]

Countries and Regions Supported Regulatory Compliance Page 19

Power Power (Including Pluggable) Table 6: Power Consumption

Material Product packaging weight and materials Contact: [email protected]

Weight Dimensions Page 17

Cisco makes the packaging data available for informational purposes only. It may not reflect the most current
legal developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to
date. This information is subject to change without notice.

© 2023 Cisco and/or its affiliates. All rights reserved. Page 19 of 22

Ordering information
Table 9 provides the ordering information for SFP+ modules and related cables.

Table 9. Ordering information

Description Product Number

10GBASE-T SFP+ Module for CAT6A cables (up to 30 meters) SFP-10G-T-X

10GBASE-SR SFP+ Module for MMF S-Class SFP-10G-SR-S

10GBASE-SR SFP+ Module for MMF SFP-10G-SR

Multirate 10GBASE-SR, 10GBASE-SW and OTU2e SFP+ Module for MMF, SFP-10G-SR-X
extended temperature range

Multirate 10GBASE-SR, 10GBASE-SW and OTU2e SFP+ Module for MMF, SFP-10G-SR-I
industrial temperature range

10GBASE-LRM SFP+ Module for MMF and SMF SFP-10G-LRM

10GBASE-LR SFP+ Module for SMF S-Class SFP-10G-LR-S

10GBASE-LR SFP+ Module for SMF SFP-10G-LR

Multirate 10GBASE-LR, 10GBASE-LW and OTU2e SFP+ Module for SMF, SFP-10G-LR-X
extended temperature range

Multirate 10GBASE-LR, CPRI 3-8, Industrial Temperature Module SFP-10G-LR10-I

10GBASE-BX10-D Bidirectional for 10km SFP-10G-BXD-I

10GBASE-BX10-U Bidirectional for 10km SFP-10G-BXU-I

10GBASE-ER SFP+ Module for SMF S-Class SFP-10G-ER-S

10GBASE-ER SFP+ Module for SMF SFP-10G-ER

Multirate 10GBASE-ER, 10GBASE-EW and OTU2e SFP+ Module for SMF, SFP-10G-ER-I
Industrial Temperature range

10GBASE-BX40-D Bidirectional for 40km SFP-10G-BX40D-I

10GBASE-BX40-U Bidirectional for 40km SFP-10G-BX40U-I

10GBASE-ZR SFP+ Module for SMF S-Class SFP-10G-ZR-S

Multirate 10GBASE-ZR, 10GBASE-ZW and OTU2e SFP+ Module for SMF SFP-10G-ZR

Multirate 10GBASE-ZR, 10GBASE-ZW and OTU2e SFP+ Module for SMF SFP-10G-ZR-I

10GBASE-CU SFP+ Cable 1 Meter, passive SFP-H10GB-CU1M

10GBASE-CU SFP+ Cable 1.5 Meter, passive SFP-H10GB-CU1-5M

10GBASE-CU SFP+ Cable 2 Meter, Passive SFP-H10GB-CU2M

© 2023 Cisco and/or its affiliates. All rights reserved. Page 20 of 22

 Description Product Number

10GBASE-CU SFP+ Cable 2.5 Meter, Passive SFP-H10GB-CU2-5M

10GBASE-CU SFP+ Cable 3 Meter, passive SFP-H10GB-CU3M

10GBASE-CU SFP+ Cable 4 Meter, passive SFP-H10GB-CU4M

10GBASE-CU SFP+ Cable 5 Meter, passive SFP-H10GB-CU5M

10GBASE-CU SFP+ Cable 7 Meter, active SFP-H10GB-ACU7M

10GBASE-CU SFP+ Cable 10 Meter, active SFP-H10GB-ACU10M

10GBASE-AOC SFP+ Cable 1 Meter SFP-10G-AOC1M

10GBASE-AOC SFP+ Cable 2 Meter SFP-10G-AOC2M

10GBASE-AOC SFP+ Cable 3 Meter SFP-10G-AOC3M

10GBASE-AOC SFP+ Cable 5 Meter SFP-10G-AOC5M

10GBASE-AOC SFP+ Cable 7 Meter SFP-10G-AOC7M

10GBASE-AOC SFP+ Cable 10 Meter SFP-10G-AOC10M

Regulatory and standards compliance

Standards:
● GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
● GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
● GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
● IEEE 802.3: 10-Gigabit Ethernet
● ITU-T G.709: Interfaces for the Optical Transport Network
● ITU-T G.975: GFEC
● ITU-T G.975.1: EFEC
● SFP+ MSA SFF-8431 (Optical Modules, Active Optical Cables, and Passive Twinax cables)
● SFP+ MSA SFF-8461 (Active Twinax cables)

Safety:

● Laser Class 1 21CFR-1040 LN#50 7/2001

● Laser Class 1 IEC60825-1
● Cable jacket of SFP+ copper modules is UL #E116441 Compliant
● All length SFP+ copper cables are ELV and RoHS Compliant

© 2023 Cisco and/or its affiliates. All rights reserved. Page 21 of 22

Cisco Capital
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business
transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve
capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you
acquire hardware, software, services and complementary third-party equipment in easy, predictable
payments. Learn more.

Next steps
Learn more about Cisco 10GBASE SFP+ fiber modules or 10GBase SFP+ copper modules (twinax cable) by
contacting your sales representative or visiting https://www.cisco.com/en/US/products/ps6574/index.html.

For S-Class SFP+ 10 Gigabit Modules, refer to the link below:

https://www.cisco.com/c/en/us/products/interfaces-modules/transceiver-modules/datasheet-listing.html.

Document history
New or revised topic Described in Date

New PID SFP-10G-LR10-I added Ordering Information March 04, 2021

New PIDs SFP-10G-SR-I, SFP-10G-ZR-I added Ordering Information July 15, 2022

Printed in USA C78-455693-29 04/23

© 2023 Cisco and/or its affiliates. All rights reserved. Page 22 of 22