VP600, VP950, E4, E4+, F4, & F4+
Ultraviolet Water Disinfection Systems from VIQUA
The quality of drinking water can change with time and become
contaminated with harmful bacteria. The PROFESSIONAL family of
compact UV disinfection systems provide a reliable, economical, and
chemical-free way to safeguard drinking water in any residential or
light commercial application. VIQUA’s products have been designed and
tested to ensure quality drinking water is at everyone’s finger tips.
Regardless of your need, there is a VIQUA system to suit your
requirements. VIQUA offers systems that range in flow rates from
22 GPM (5 m3/hr) up to 46 GPM (10 m3/hr) for small businesses and
public facilities
HOT WATER PIPES
COLD WATER PIPES
OPTIONAL BY-PASS ASSEMBLY OPTIONAL BY-PASS ASSEMBLY
TIME OF DAY
00 2:00 PM
OPTIONAL
SOLENOID
VALVE GFI CIRCUIT
TO MATCH
VOLTAGE
WATER METER MAIN
WATER
SHUT-OFF
SHUT-OFF OPTIONAL
VALVE
TEMPERATURE
MANAGEMENT
VALVE
JUNCTION
5 MICRON OPTIONAL BOX
SEDIMENT BY-PASS
FILTER ASSEMBLY (E4/F4 and +
OPTIONAL MODELS ONLY)
SENSOR
OPTIONAL
CARBON
FILTER
TO
DRAIN
OPTIONAL
WATER
SOFTENER
SHUT-OFF
VALVE
Features of VIQUA UV water disinfection systems
• Equipped to inactivate chlorine-resistant parasites such as • The special lamp plug ensures that no one can power the UV
Cryptosporidium and Giardia, harmful bacteria like E.Coli, and lamp if it’s not in the UV chamber.
viruses not visible to the naked eye.
• Specially designed and tested high output lamps provide
consistent and reliable ultraviolet output over the entire life of the
VP600M, VP950M, E4+, & F4+
lamp (9000 hours) to ensure continuous purification, and offer • User friendly sensor ensures safe UV levels are maintained.
superior performance in a wide range of water conditions.
• Monitored systems have a specialized 254nm UV intensity
• The system is easy to maintain and service with easy lamp and sensor which notifies homeowner of changes in UV performance.
quartz sleeve replacement.
• Monitored systems allow for the installation of an optional
• Built with a durable stainless steel chamber to prolong life and solenoid valve which will stop the flow of water through the
eliminate ultraviolet light degradation. chamber should the UV performance fall below a safe a level.
• NEW LCD controller features a large backlit display for easy
reading, simultaneously displaying lamp life remaining, UV
Intensity Status (E4/E4+, & F4/F4+ only), support contact
information, and lamp replacement reminder that indicates when
the lamp needs to be replaced, ensuring continued water safety.
The intuitive, user-friendly menu is dealer programmable and
allows the user to quickly find the replacement parts needed for
the system by using the replacement parts menu, dealer contact
information, as well as on board quick-reference instructions
for system troubleshooting.
Specifications
MODEL
N. America VP600; VP600M; VP950; VP950M; E4; E4+ (650682; 650683) F4; F4+ (650686; 650687)
EU CEE 7/7 VP600/2; VP600M/2; VP950/2; VP950M/2; 650718; 650719 650720; 650721
AUS/NZ 3112 VP600/2A; VP600M/2A; VP950/2A; VP950M/2A; -- --
UK BS 1363 VP600/2B; VP600M/2B VP950/2B; VP950/2B -- --
FLOW RATES (@ 95% UVT) 20°C; End of Lamp Life
US Public Health (16 mJ/cm2) 40 GPM (150 lpm) (9.0 m3/hr) 60 GPM (230 lpm) (13.7 m3/hr) 42 GPM (160 lpm) (9.6 m3/hr) 45 GPM (170 lpm) (10.2 m3/hr)
VIQUA Standard (30 mJ/cm2) 24 GPM (91 lpm) (5.5 m3/hr) 34 GPM (130 lpm) (7.8 m3/hr) 22 GPM (83 lpm) (5 m3/hr) 36 GPM (136 lpm) (8.2 m3/hr)
NSF/EPA (40 mJ/cm ) 2
18 GPM (68 lpm) (4.1 m /hr) 3
26 GPM (97 lpm) (5.8 m /hr) 3
16 GPM (60 lpm) (3.6 m /hr) 3
27 GPM (102 lpm) (6.1 m3/hr)
DIMENSIONS
Chamber 30.3” x 3.5” (78 cm x 8.9 cm) 45” x 3.5” (114 cm x 8.9 cm) 30” x 4” (76 cm x 10 cm) 44.25” x 4” (112.5 cm x 10 cm)
9.3” x 3.25” x 2.5” 9.3” x 3.25” x 2.5” 8.5” x 6” x 3” 8.5” x 6” x 3”
Controller
(24.1 cm x 8.1 cm x 6.4 cm) (24.1 cm x 8.1 cm x 6.4 cm) (22 cm x 15 cm x 7.6 cm) (22 cm x 15 cm x 7.6 cm)
Inlet/Outlet Port Size 1” MNPT* 1 1/2” MNPT* 1” MNPT 1” MNPT
Shipping Weight 14 lbs (6.4 kg) 19 lbs (8.6 kg) 13 lbs (5.9 kg) 18 lbs (8.2 kg)
ELECTRICAL
Voltage 100-240V / 50/60 Hz 100-240V / 50/60 Hz 100-240V / 50/60 Hz 100-240V / 50/60 Hz
Power Consumption 78 W 110 W 83 W 130 W
Maximum Operating Pressure 125 psi (8.62 bar) 125 psi (8.62 bar) 125 psi (8.62 bar) 125 psi (8.62 bar)
Influent Water Temperature 2-40°C (36-104°F) 2-40°C (36-104°F) 2-40°C (36-104°F) 2-40°C (36-104°F)
FEATURES
Visual “Power On” YES YES YES YES
Chamber Material 304 SS 304 SS 304 SS 304 SS
Visual Lamp Life Remaining YES YES YES YES
Audible Lamp Failure YES YES YES YES
Audible Lamp Replacement YES YES YES YES
Reminder
Solenoid Valve Optional - SOL-1.0 or SOL-1.0/2 Optional - SOL-1.0 or SOL-1.0/2 Optional (650717-002) Optional (650717-002)
UV Sensor VP600M VP950M E4+ E4+
*/2B - BSP
VP600M, VP950M, E4, E4+, F4, & F4+ DOSE CURVES*
Replacement Parts 160
140
S600RL-HO – UV lamp for VP600& VP600M 602734 – quartz sleeve for F4 & F4+
S950RL-HO – UV lamp for VP950 & VP950M BA-ICE-C – controller for VP600 & VP950 120
Fluence Rate (mJ/cm2)
BA-ICE-CM – controller for VP600M & 100
602806 – UV lamp for E4 & E4+
VP950M F4, F4+
80 E4, E4+
602807 – UV lamp for F4 & F4+ 650733R-001 – controller E4, E4+, F4 & F4+ VP950M
QSO-600 – quartz sleeve for VP600 & VP600M 650703 – sensor for E4+ & F4+ 60 VP600M
QSO-950 – quartz sleeve for VP950 & VP950M 254NM-C1 – sensor for VP600M & VP950M 40
602733 – quartz sleeve for E4 & E4+
20
0
0 10 20 30 40 50 60 70
Water Quality Parameters Flow Rate (USGPM)
*@ 95% UVT and 20°C
Hardness Iron Tannins
< 7 grains (120 mg/L) < 0.3 mg/L < 0.1 mg/L
425 Clair Rd. W, Guelph, Ontario, Canada N1L 1R1
t. 1.519.763.1032 • f. 1.519.763.5069 • tf. 1.800.265.7246 (US /CAN) • t. +31.73.747.0144 (EUR)
[email protected] • www.viqua.com
LIT-520334-R_RevD © 2019 VIQUA - a Division of Trojan Technologies Group ULC
