Scribd
Upload
1K views2 pages

GB 20 & Astm 106

The document summarizes the specifications of 20 # 20 steel pipe material and ASTM A106 seamless carbon steel pipes. 20 # 20 steel pipe is a high quality carbon structural steel used for applications requiring higher strength than 15 steel. It has good weldability and plastic deformation properties. ASTM A106 pipe is used for high temperature service between sizes of 6-323mm outside diameter, with wall thicknesses up to 30mm and lengths up to 12,000mm. It comes in Grades A, B, and C with specified chemical compositions and mechanical properties like tensile strength and yield point.

Uploaded by

sathesh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views2 pages

GB 20 & Astm 106

The document summarizes the specifications of 20 # 20 steel pipe material and ASTM A106 seamless carbon steel pipes. 20 # 20 steel pipe is a high quality carbon structural steel used for applications requiring higher strength than 15 steel. It has good weldability and plastic deformation properties. ASTM A106 pipe is used for high temperature service between sizes of 6-323mm outside diameter, with wall thicknesses up to 30mm and lengths up to 12,000mm. It comes in Grades A, B, and C with specified chemical compositions and mechanical properties like tensile strength and yield point.

Uploaded by

sathesh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

20 # 20 steel pipe material, typically 20 20 # seamless steel tube material: high quality carbon structural steel Grade: 20 steel

Standard: GB / T 699-1988 Characteristics and application: Higher strength steel than 15, very few quenching, no temper brittleness. Cold plastic deformation of high, normal for bending, rolling, curved edges and hammer arch and other processing, and contact welding arc welding performance is good, when welding small thickness, shape or form demanding complex workpieces on the crack-prone. Cutting of cold-drawn or annealed state than normalizing condition is good, generally used in the manufacture Shouli Bu large and require high toughness. Chemical Composition: Carbon C: 0.17 ~ 0.24 "Silicon Si: 0.17 ~ 0.37 Manganese Mn: 0.35 ~ 0.65 S S: 0.035 P P: 0.035 Cr Cr: 0.25 Ni-Ni: 0.25 Cu Cu: 0.25 Mechanical Properties: Tensile strength b (MPa): 410 (42) yield strength s (MPa): 245 (25) elongation 5 (%): 25 section shrinkage (%): 5, hardness: no heat treatment , 156HB, sample size: the sample size of 25mm Heat treatment and microstructure specifications: Heat treatment specifications: normalizing, 910 , air cooling. Microstructure: ferrite + pearlite. Delivery Status: in order to not heat or heat treatment (annealing, normalizing or tempering) the state of delivery. Required heat treatment delivery should be specified in the contract, did not specify who delivered by non-heat treatment

Standard: ASTM A106 Seamless carbon steel pipes for high-temperature service Application: Size(mm): For high temperature service O.D.: 6.0323.0 W.T.: 130 L: max 12000

Grade and Chemical Composition () Grade A B C C 0.25 0.30 0.35 Mn 0.27-0.93 0.29-1.06 0.29-1.06 P 0.035 0.035 0.035 S 0.035 0.035 0.035 Si 0.10 0.10 0.10 Cr 0.40 0.40 0.40 Cu 0.40 0.40 0.40 Mo 0.15 0.15 0.15 Ni 0.40 0.40 0.40 V 0.08 0.08 0.08

Mechanical Properties Rm Mpa Tensile Strength 330 Mpa Yield Point 205 Elongation 20 Delivery Condition Annealed

Grade A

B C

415 485

240 275

20 20

Annealed Annealed

Dimension Tolerances Pipe Type OD Cold Drawn Pipe Sizes 48.3mm 60.3mm WT Tolerances 0.40mm 1mm 12.5

You might also like