Intelligent Devices
Intelligent Photoelectric Smoke Detector
& Photoelectric Smoke with Thermal MEA
IDP-Photo, IDP-Photo-T and IDP-PhotoR
225-02-E Vol. V
The IDP-Photo is a photoelectric smoke detector and the
IDP-Photo-T is a photoelectric smoke detector with thermal.
These plug in smoke detectors, with integral communication,
provide features that surpass conventional detectors and are for
use with Silent Knight IFP-series fire alarm control panels
(FACPs).
Detector sensitivity can be programmed from the FACP
software. Sensitivity is continuously monitored and reported to
the FACP. Point ID capability allows each detector’s address to
be set with rotary address switches, providing exact detector
locations for selective maintenance when chamber
contamination reaches unacceptable levels. IDP-Photo (Base not Included)
IDP-Photo and IDP-Photo-T have a unique optical sensing
chamber that is engineered to sense smoke produced by a
wide range of combustion sources. In the IDP-Photo-T, dual Installation
electronic thermistors add 135ºF (57ºC) thermal technology to The IDP-Photo and IDP-Photo-T plug into a
maximize detection. compatible IDP-series detector base.
The IDP-PhotoR is a remote test capable detector for use with
Compatibility
the DNR (W) duct smoke detectors.
The IDP-Photo and IDP-Photo-T are
compatible with the following IDP-series
Features detector bases:
• Sleek, low-profile design
• B210LP 6” Mounting Base
• Reliable analog communications for trouble-free operation
• B501 4” Mounting Base
• Age resistant polymer housing • B224BI 6” Isolator Base
• Dual electronic thermistor design on the IDP-Photo-T • B224RB 6” Relay Base
• Superior EMI resistance for reliability • B200SR 6” Sounder Base
• Simple field cleaning for code compliance
• Variety of mounting options to meet any application The IDP-Photo and IDP-Photo-T are
• Dual LED indicators for 360º visibility compatible with the following FACPs:
• Detector transmits signal to indicate maintenance is required • IFP-2000 / RPS-2000 Intelligent Fire Panel
• Optional remote LED annunciator (System Sensor® PN • IFP-1000 Intelligent Fire Panel
RA100Z)
• IFP-100 Intelligent Fire Panel
• Plug-in mounting provides ease of installation
• IFP-50 Intelligent Fire Panel
• Tamper-proof feature available on mounting bases
• Listed for use in duct applications • IFP-25 Intelligent Fire Panel
• Rotary address switches for fast installation
• UL Listed
P/N 350280 Rev E
Copyright © 2011 Honeywell International Inc.
Wiring IDP-Series Detector Mounting Bases
Specifications* Ordering Information
Physical
IDP-Photo Photoelectric Smoke Detector
Height: 2.0” (5.0 cm)
IDP-Photo-T Photoelectric Smoke Detector with
Diameter: 4.1” (10.4 cm)
Thermal (135ºF)
Shipping Weight: 5.2 oz. (147 g)
IDP-PhotoR Photoelectric smoke detector, remote
Electrical test capable, for use with DNR (W) duct
Operating Voltage: 15–32 VDC smoke detector
Standby Current: Accessories
250 µA @ 24 VDC (no communication; LED off) RA100Z Remote LED Annunciator.
300 µA @ 24 VDC (one communication every 5 sec with XR2B Detector Removal Tool. A removal and
LED enabled) replacement tool for IDP plug-in
Alarm Current: 6.5 mA @ 24 VDC max (with LED on) detectors. Includes the T55-127-000.
M02-04-01 Detector Test Magnet.
Environmental
Operating Temperature M02-09-00 Test Magnet with Telescoping Handle.
IDP-Photo: 32º – 120ºF (0ºC – 49ºC) XP-4 Extension Pole for XR2B. Extends from
IDP-Photo-T: 32º – 100ºF (0ºC – 38ºC) 5 – 15 ft.
Humidity: 10% – 93% non-condensing T55-127-000 Detector Removal Head.
Other Ratings BCK-200B Black Detector Kit. For IDP-series
detectors.
IDP-Photo-T Thermal: Fixed temperature setpoint 135ºF
(57ºC) * Unless otherwise noted, specifications apply to IDP-Photo and
IDP-Photo-T.
Velocity: 0 – 4000 fpm (0 – 20 m/sec) (suitable for
installation in ducts)
IDP-Photo Insect Screen Hole Size: 0.016” (0.41 mm)
nominal
This document is not intended to be used for installation purposes. We try to keep our
product information up-to-date and accurate. We cannot cover all specific applications or
anticipate all requirements. All specifications are subject to change without notice. For
more information, contact Silent Knight 12 Clintonville Road, Northford, CT 06472-1610
Phone: (800) 328-0103, Fax: (203) 484-7118. [Link]
Made in the U.S.A.
