LUKOIL Marine Lubricants

PRODUCTS
ABOUT

Publisher
LUKOIL Marine Lubricants DMCC
JBC 4 Tower, Unit No. 1506, 15th floor
Jumeirah Lakes Towers
P.O. Box: 487718 Dubai, UAE
Phone + 971 (0)4 430 0769
Fax + 971 (0)4 797 6800
Email [email protected]
www.lukoilmarine.com

Photo
© LUKOIL Marine Lubricants Germany GmbH

This brochure and the information

given are considered to be accurate
to the best of our knowledge, no
warranty expressed or implied,
is given as to the accuracy or
completeness of the information or
suitability of the products.

January 2018
 03

CO N T E NT S

04 GENERAL

05 MAIN GRADES

06 SECONDARY GRADES

06 MINERAL OILS

08 SYNTHETIC OILS, SPECIALITIES AND GREASES

10 VISCOSITY CLASSIFICATION

11 VISCOSITY–TEMPERATURE DIAGRAM
04 GENERAL

GENERAL

LUKOIL Marine Lubricants offers a full range of the highest quality marine products in all major ports
around the globe. As your trusted partner we ensure the best possible service. This product brochure
provides technical information about our marine grade range.

LUKOIL Marine Lubricants' secondary grade range consists of TITAN, RENOLIN, RENISO and RENOLIT,
which are trademarks of Fuchs Europe Schmierstoffe GmbH. These are exclusively produced for LUKOIL
Marine Lubricants. For further detailed technical information please refer to the corresponding Technical
Data Sheet (TDS) or Safety Data Sheet (SDS).

HEALTH, SAFETY AND

ENVIRONMENTAL PROTECTION

LUKOIL Marine Lubricants operates in strict compliance with LUKOIL‘s Health, Safety and Environment
policy. Operating procedures are in place to ensure the health and safety of employees, contractors,
customers and the public. LUKOIL Marine Lubricants is committed to act in a socially responsible manner
in protecting the environment and preserving natural resources. A comprehensive Health, Safety and
Environment Management System has been developed and is operated worldwide to achieve and
maintain these objectives.

LUKOIL Marine Lubricants encourages open dialogue with all parties on matters of health, safety and
the environment. For more information, please visit www.lukoil.com.

The user is responsible for evaluating and using products in a safe manner and is expected to comply
with all applicable laws and regulations. On request, Safety Data Sheets are available for all products.
They describe the products in terms of safety in use, handling and transportation. For further information
about LUKOIL Marine Lubricants, please contact your LUKOIL Marine Lubricants Representative or visit
our website at www.lukoilmarine.com.

Note: While the information and figures given here are typical of current production and confirm to specification, minor variations may occur.
No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
 MAIN GRADES 05

MAIN GRADES

Grade BN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
SAE mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Marine Cylinder Lubricants

The NAVIGO MCL range is an entire range
of marine cylinder lubricants for low-speed
NAVIGO 140 MCL 60 140 980 22 -6 240
engines with excellent deposit control, anti-
wear properties and scuffing prevention.

NAVGIO 70 MCL AW, NAVIGO 100 MCL

NAVIGO 100 MCL 50 100 960 20 -6 240 and NAVIGO 140 MCL are suitable for HFO
and low sulphur fuel oil (LSFO<1.5%S) opera-
tion. Depending on engine design, short term
operation on very low sulphur fuel oil
NAVIGO 70 MCL AW 50 70 935 20 -6 240 (VLSFO<0.5%S) or ultra low sulphur fuel oil
(ULSFO<0.1%S) is possible.
Marine cylinder lubricant for all low-speed two-
stroke diesel engines running on LSFO (<1.5%S),
NAVIGO MCL Extra 50 40 913 19 -6 230
VLSFO (<0.5%S) and ULSFO (<0.1%S).

Marine cylinder lubricant for all low-speed

two-stroke diesel engines running on VLSFO
NAVIGO MCL Ultra 50 20 903 18.5 -6 230 (<0.5%S) and ULSFO (<0.1%S) including
LNG, methanol, ethane and LPG.

Grade BN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
SAE mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

System Oil
Alkaline marine crankcase lubricant for
low-speed marine diesel crosshead engines.
NAVIGO 6 CO 30 6 891 11.5 -6 220 Outstanding thermal and oxidation stability
and detergency.

Grade BN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
SAE mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Trunk Piston Engine Oils

NAVIGO TPEO 55/40 40 55 923 14.5 -6 230 NAVIGO TPEO range for highly rated medium-
speed diesel engines. These oils provide
NAVIGO TPEO 50/40 40 50 919 14.5 -6 230 excellent thermal and oxidation stability with
outstanding detergency and dispersancy.
NAVIGO TPEO 40/40 40 40 915 14.5 -6 230
This leads to exceptional deposit control
NAVIGO TPEO 30/40 40 30 911 14.5 -6 230 especially in oil-cooled piston undercrowns.
The range provides optimal adaption to the
NAVIGO TPEO 20/40 40 20 901 14.5 -6 230 sulphur content of the fuel in use due to the
NAVIGO TPEO 15/40 BN range from BN 15 to BN 55.
40 15 898 14.5 -6 230

NAVIGO TPEO 30/30 30 30 905 11.5 -6 230

NAVIGO TPEO 20/30 30 20 899 11.5 -6 230

NAVIGO TPEO 15/30 30 15 898 11.5 -6 230

High quality alkaline lubricants recommended
NAVIGO TPEO 40 Ultra 40 10 891 14.5 - 15 230 for marine trunk piston engines running on
ISO 8217 type DMA/DMB/DMC fuels, espe-
cially designed for applications where a higher
level of detergency/dispersancy and liner
NAVIGO TPEO 30 Ultra 30 10 891 11.5 - 15 230 lacquer control is needed.
06 MAIN GRADES

Grade BN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
SAE mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Trunk Piston Engine Oils

Premium quality mineral-based monograde
AVANTGARDE M 40 40 9 898 14.5 - 15 230 engine oils offering extended oil change
intervals in latest generation high-speed marine
and power generation four-stroke turbocharged
AVANTGARDE M 30 30 9 898 11.5 - 15 220 engines running on distillate fuel with sulphur
contents from zero up to 1%wt.
EFFORSE 4004 is a high performance low-ash
mineral gas engine oil designed for marine
EFFORSE 4004 40 5.6 888 14.3 - 12 268 and stationary trunk piston engines running on
natural gas and associated petroleum gas.

SECONDARY GRADES

MINERAL OILS

Grade BN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
SAE mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Other Engine Oils

High quality, low ash, heavy duty, detergent
diesel engine oil specifically designed for
NAVIGO DD 40 40 7 894 143 15 100 - 15 225
Detroit Diesel two-stroke engines and other
engines that require API-CF SAE 40 engine oils.
Mineral-based multigrade engine oil for the
latest generation of heavy duty four-stroke
AVANTGARDE Ultra 15W-40 15W-40 10 886 104 14.2 135 - 30 224
turbocharged engines, allowing for extended
time between overhauls. API CI-4/SL specified.
Long-life and fuel economy oil for high-speed
TITAN Cargo MC 10W-40 10W-40 867 100 14.5 146 - 42 220 diesel engines with outstanding cold start
performance.
TITAN 2T 100S 876 47.5 8.44 - 42 130 Fully synthetic high performance two-stroke en-
gine oil. Burns without leaving deposits on the
LATITUDE 2T Special 871 37 6.5 128 - 45 108 spark plug. Best adapted for outboard engines.

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Hydraulic Oils
RENOLIN B 15 HVI 15 0.5 859 15 3.8 151 - 45 180 Multigrade hydraulic fluids for a wide tem-
perature range and severe load conditions.
RENOLIN B 22 HVI 22 0.5 866 22 4.9 156 - 45 175 Also suitable for general lubrication of bearings
and gearboxes where a high viscosity index
RENOLIN B 32 HVI 32 0.5 871 32 6.3 152 - 48 178
and good load carrying capacity is required.
RENOLIN B 46 HVI 46 0.5 879 46 8.1 149 - 45 186 Denison HF0 approved.

RENOLIN B 68 HVI 68 0.5 868 68 11 153 - 33 240

RENOLIN B 100 HVI 100 0.5 871 100 13.5 140 - 24 240

RENOLIN B 150 HVI 150 0.5 881 150 17.7 130 - 24 260

Low Temperature Hydraulic Oils

RENOLIN ZAF 15 LT 15 0.5 855 15 5.5 370 - 48 120 Multigrade oil for hydraulic systems, bearings
and transmissions with excellent low tempera-
RENOLIN ZAF 32 LT 32 0.5 867 32 9 270 - 60 170 ture behaviour. Extremly high viscosity index.
 SECONDARY GRADES 07

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Gear Oils
RENOLIN CLP 68 68 0.6 886 68 8.7 99 - 24 236 High performance gear oils with outstanding
extreme pressure characteristics and load car-
RENOLIN CLP 100 100 0.6 890 100 11.2 98 - 24 240 rying capacity. Recommended for spur, helical
and bevel enclosed gears with circulation or
RENOLIN CLP 150 150 0.6 894 150 14.5 94 - 24 250
splash lubrication. Operating temperatures up to
RENOLIN CLP 220 220 0.6 896 220 18.9 96 - 24 260 100°C and peaks above 120°C. RENOLIN CLP
oils can be used for all applications where CLP
RENOLIN CLP 320 320 0.6 900 320 24 95 - 14 255 oil according to DIN 51517-3 is recommended.
RENOLIN CLP 460 These products meet and exceed all current re-
460 0.6 901 460 30.4 95 - 12 270
quirements of gear and bearing manufacturers.
RENOLIN CLP 680 680 0.6 918 680 36.8 88 - 10 270 CKC/CKD according to ISO12925-1.
Mineral universal gear oil for transmission
TITAN Supergear 80W-90 1 890 134 14.4 108 - 27 220 and axle gearboxes for outboard motors.
SAE 80W-90 classified.

Transmission Fluid
Multipurpose transmission fluid, recommended
TITAN ATF 4000 862 37.8 7.6 174 - 50 190 whenever DEXRON III performance is required.

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Turbine Oils
RENOLIN Eterna 32 32 0.12 842 32 5.6 - 15 220 New generation of turbine oils for gas,
steam and expansion turbines as well as
RENOLIN Eterna 46 46 0.12 846 46 7.6 - 15 220
turbo chargers.
RENOLIN Eterna 68 68 0.12 851 68 9.9 - 15 230

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Heat Transfer Oils

High performance heat transfer fluid for closed
ASSISTO Therm 5 32 <0.05 870 30.5 5.3 - 12 210 heat transfer systems with or without forced
circulation. According to DIN 51522.
Heat transfer oil with exceptional low tempera-
ASSISTO Therm LT 15 <0.05 840 14 3 - 42 185 ture properties.

THERMOCLEAN 1050 >160 Cleaning additive for heat transfer systmes.

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Air Compressor Oils

RENOLIN 503 68 0.1 878 68 8.6 97 - 12 248 VDL air compressor oils according to
DIN 51506 for piston and rotation compres-
NAVIGO RC 100 100 885 100 11 94 -9 248 sors. For final compression temperatures
RENOLIN 504 100 0.1 880 96 10.8 95 - 12 255 up to 220°C. These products are based
on special mineral oils.
RENOLIN 505 150 0.1 888 154 14.4 90 -9 258

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Refrigeration Oils
RENISO KM 32 32 0.01 881 32 4.9 63 - 45 202 Special naphthenic refrigeration oils compatible
with Ammonia NH3 (R717) and CFC/HCFC
RENISO KS 46 46 0.01 895 46 5.8 47 - 42 195 (R12/R22) refrigerants in open, semi-hermetic
and hermetic compressors.
RENISO KC 68 68 0.01 900 68 7.2 45 - 39 200
08 SECONDARY GRADES

SYNTHETIC OILS, SPECIALITIES AND GREASES

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Gear Oils
Fully synthetic gear oils based on polyalphaolefin
RENOLIN Unisyn CLP 220 220 0.6 852 220 25.7 148 - 45 260
for applications where a long-life CLP-HC type
according to DIN 51517-3 is required.
RENOLIN Unisyn CLP 320 320 0.6 860 320 35 155 - 42 260

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Air Compressor Oils

NAVISYN SC 46 46 857 46 7.8 139 - 40 245 Synthetic PAO compressor oil for flooded or
oil injection screw type air compressors.
RENOLIN Unisyn OL 46 46 0.1 843 46 7.9 146 < - 60 260

NAVISYN SC 68 68 858 68 10.5 142 - 40 248

RENOLIN Unisyn OL 68 68 0.1 845 68 10.6 144 < - 60 265

A diester based synthetic oil designed for re-

NAVISYN DE 100 100 961 97 9.3 80 - 35 274 ciprocating compressors and vacuum pumps.

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Refrigeration Oils
RENISO Triton SEZ 32 32 0.03 1007 32 6.1 141 - 48 240 Chlorine-free, polyolester-based refrigeration
oils compatible with chlorine-free HFC refrig-
RENISO Triton SE 55 55 0.03 1009 55 9 143 - 51 270 erants such as R134a, R404a and R410c.
Depending on the viscosity RENISO Triton can
RENISO Triton SEZ 68 68 0.03 973 65.6 9.5 125 - 45 258
be used for hermetic, semi-hermetic and open
RENISO Triton SEZ 100 100 0.03 965 100 11.8 107 - 39 288 piston compressors as well as screw type and
turbo compressors. The product has excellent
RENISO Triton SE 170 170 0.03 972 173 17.6 111 - 24 260 compatibility with elastomers and all materials
RENISO Triton SE 220 used in refrigeration circuits.
220 0.01 980 235 20.7 103 - 27 285

Alkylbenzene-based synthetic refrigeration oil

RENISO S 68 68 0.01 869 68 6.2 - 33 188 compatible with chlorine containing refrigerants
(e.g. R22, R502, R401A/B, R402A/B),
iso-buthane (R600a) and propane (R290).
RENISO SP 100 100 0.01 871 100 7.9 - 24 190 RENISO S 68 can also be used for NH3 (R717).

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Gas Compressor Oil

High performance gas compressor oil based on
polyalkylene glycol. Compatible with hydrocarbon
chemical gases (propane, butane, ethylene and
RENOLIN LPG 185 185 0.6 1012 185 29.1 197 - 36 280 mixtures), petroleum gases and natural gases
with a high amount of methane as well as other
chemical gases (NH3, butadiene). The oil is
suitable for piston, screw and vane compressors.

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Stern Tube Oil

Emulsifying stern tube oil; provides 95% of
RENOLIN CLP 220 Plus 220 0.7 899 220 18.9 96 - 24 260 load capacity when mixed with 5% water.
 SECONDARY GRADES 09

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Environmentally Acceptable Hydraulic Oils (EAL)

High performance, rapidly biodegradable
PLANTOSYN 32 HVI 32 0.55 915 32 6.23 148 - 46 220
hydraulic and lubricating oils based on saturated
synthetic esters. Fully compliant with ISO15380:
PLANTOSYN 46 HVI 46 0.55 913 46 8.2 150 - 36 280
HEES and OECD-Guideline 301B. The grade
range bears the EU Ecolabel.
PLANTOSYN 68 HVI 68 0.55 916 68 10.55 143 - 27 280

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Environmentally Acceptable Gear Oils (EAL)

High performance, rapidly biodegradable
PLANTOGEAR 100 S 100 1 924 100 15.8 170 - 51 280
synthetic ester-based gear oil. Fully compliant
with DIN 51517-3, approved by major gear
PLANTOGEAR 150 S 150 1 926 150 21 165 - 45 280
manufacturers. FZG load stage >12. The
grade range bears the EU Ecolabel.
PLANTOGEAR 220 S 220 1 938 220 27.4 160 - 48 280

PLANTOGEAR 320 S 320 0.7 943 320 35.1 155 - 30 280

NLGI Dropping Temperature Base Oil Color Thickener Application

Grade Point Range Viscosity
°C °C cSt at 40°C

Greases
Multipurpose grease for all points
requiring a high performance
NAVIGREASE CSX 2 2 >280 - 20 to +160 200 brown Ca sulphonate complex concerning water resistance, working
stability, EP and AW properties.
For plain and roller bearings under
NAVIGREASE EP 2 2 >195 - 20 to +120 200 brown lithium high load in humid atmosphere.
For plain and roller bearings with
RENOLIT FLM 2 2 >180 - 30 to +140 100 black lithium with MoS2 extended re-greasing intervals.
For plain and roller bearings under
RENOLIT LX-PEP 2/3 2/3 >250 - 30 to +150 170 green lithium complex high load in humid atmosphere.
Coupling grease with outstanding
RENOLIT EP X1 1 >170 - 15 to +120 1050 black lithium with MoS2 performance at high rotation speeds
due to exeptional base oil viscosity.
Free-flow adhesive grease for
RENOLIT LZR 000 00/000 >160 - 40 to +110 43 green lithium calcium centralized lubrication systems.

Environmentally Acceptable Greases (EAL)

Environmentally acceptable extreme
pressure greases based on biode-
NAVIGREASE BIO 2 2 >200 - 30 to +120 345 brown lithium gradable synthetic esters. Suitable
for a wide range of deck and
engine applications such as plain
and roller bearings as well as
central lubricating systems, ropes
NAVIGREASE BIO 0 0 194 - 40 to +80 320 brown lithium and open gears, compliant with
latest US regulations.

Grade TAN Density Kinematic Viscosity VI Pour Flash Application

kg/m³ Point Point
ISO VG mgKOH/g 15°C cSt at 40°C cSt at 100°C °C COC in °C

Corrosion Protection
Barium-free corrosion preventive and dewatering
fluid which forms a thin, waxy film. It is used
ANTICORIT DFW 8301 811 >65 universally for corrosion protection of metal
parts, spare parts, tools, etc.
10 VISCOSITY CLASSIFICATION

VISCOSITY CLASSIFICATION

Note The kinematic viscosity at 40°C and 100°C are related horizontally for 95 VI Oils. The SAE specifications are at 100°C
only and Multigrade Oil viscosities are not representative at other temperatures.
 VISCOSITY -TEMPERATURE DIAGRAM 11

VISCOSITY-TEMPERATURE DIAGRAM
www.lukoilmarine.com