Scribd
Upload
71 views1 page

Sedimentation Experiment Setup CE 115

The document describes a sedimentation experiment device (CE 115) that allows users to investigate and compare sedimentation processes in different suspensions. The device includes 5 transparent tanks for preparing and observing suspensions as solid particles settle based on density differences. Additional components aid in preparing, mixing, and measuring properties of the suspensions and sedimentation times. The device enables learning objectives around determining settling velocities of solids in suspensions and how coagulants impact the process.

Uploaded by

damarsyah putra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views1 page

Sedimentation Experiment Setup CE 115

The document describes a sedimentation experiment device (CE 115) that allows users to investigate and compare sedimentation processes in different suspensions. The device includes 5 transparent tanks for preparing and observing suspensions as solid particles settle based on density differences. Additional components aid in preparing, mixing, and measuring properties of the suspensions and sedimentation times. The device enables learning objectives around determining settling velocities of solids in suspensions and how coagulants impact the process.

Uploaded by

damarsyah putra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

gunt

CE 115
Fundamentals of sedimentation

Learning objectives/experiments

• determination and comparison of the


settling velocities of solids in suspen-
sions dependent on the solid density
and concentration and the liquid dens-
ity and viscosity
• influence of coagulants on the settling
velocity

Specification

[1] experiments in the fundamentals of


sedimentation
[2] 5 transparent tanks with scale for
comparison of the settling velocities
of solids in various suspensions
[3] tanks removable for filling, mixing
and cleaning
[4] tanks backlit by fluorescent tubes to
aid observation
[5] 3 measuring cups for preparation of
suspensions
[6] pycnometer to determine the dens-
ity of the liquids and solids
[7] stopwatch to record the sedimenta-
tion time
[8] recommended accessories: balance,
coagulant

Technical data

Tanks
• length: 1000mm
• inside diameter: 42mm
• scale division: 1mm
• material: PMMA
Fluorescent tubes
Description • power: 6x 18W
Measuring cups
• separation of suspensions by sed- Using CE 115, the sedimentation pro- • capacity: 2000ml
imentation cesses in different suspensions can be • scale division: 50ml
investigated and compared. Five trans- Stopwatch
Sedimentation is often used to clarify parent cylindrical tanks are provided for • resolution: 1/100sec
suspensions. In the process, the solid the purpose. The suspensions are pre-
particles move downwards in a liquid ow- pared in measuring cups, poured into 230V, 50Hz, 1 phase
ing to their density. the removable tanks, and mixed by shak- 230V, 60Hz, 1 phase
ing. The tanks are then mounted vertic- 120V, 60Hz, 1 phase
ally on the experimental unit. To aid ob- UL/CSA optional
servation of the sedimentation process, LxWxH: 750x460x1160mm
the tanks are backlit. Weight: approx. 53kg

Required for operation

Coagulant (recommendation)

Scope of delivery

1 experimental unit
3 measuring cups
1 stopwatch
1 pycnometer
1 set of instructional material

G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@[Link], Web [Link]
We reserve the right to modify our products without any notifications. Page 1/1 - 04.2017
Powered by TCPDF ([Link])

You might also like