ASI4517R12v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
65/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2) 2 x (1695 - 2690) (LBy1/RBy3)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
2 - 12 , continuously adjustable, each band 2 - 12 , continuously adjustable, each band
Electrical downtilt (°)
separately separately
at mid Tilt 14.1 14.7 14.9 15.2 15.5 15.9 16.1 16.3
Gain (dBi)
over all Tilts 14.0 ±0.5 14.6 ±0.5 14.8 ±0.5 15.0 ±0.5 15.4 ±0.6 15.8 ±0.5 16.0 ±0.5 16.2 ±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±6 62 ±6 59 ±6 56 ±6 63 ±6 60 ±6 59 ±6 57 ±6
Vertical 3dB beam width (°) 10.9 ±0.9 9.9 ±0.7 9.4 ±0.5 8.9 ±0.5 9.0 ±0.8 8.0 ±0.7 7.2 ±0.4 6.5 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio , ±30° (dB) > 20 > 21 > 22 > 22 > 24 > 24 > 25 > 24
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 17 > 17 > 16
Max. power per input (W) 300 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
Electrical Properties
2 x (1427 - 2690) (LTy2/RTy4)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately
at mid Tilt 14.8 15.6 16.0 16.2 16.3
Gain (dBi)
over all Tilts 14.7 ±0.6 15.5 ±0.6 15.9 ±0.6 16.1 ±0.5 16.2 ±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±6 66 ±6 62 ±6 59 ±6 57 ±6
Vertical 3dB beam width (°) 11.1 ±0.8 9.0 ±0.8 8.1 ±0.7 7.2 ±0.4 6.5 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30° (dB) > 24 > 26 > 26 > 26 > 25
Cross polar ratio (dB) 0° > 18 > 16 > 16 > 17 > 17
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
* Total power : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1
ASI4517R12v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
65/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 369 x 226
Packing dimensions (H x W x D) (mm) 2335 x 455 x 270
(738)
Antenna weight (kg) 34.5
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 45.9 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
2099
1303
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 425 (at 150 km/h)
Wind load (N) Lateral: 505 (at 150 km/h)
Maximum: 770 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
58
Connector 12 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 ° 2.1 kg 1 (Separate packing)
Pattern sample for reference
690 - 960 MHz 1427 - 2690 MHz 1695 - 2690 MHz
2
ASI4517R12v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
65/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Integrated RET Specifications
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety)，ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…........Lr1
y2 y4
HWxxxx…….LBy1
HWxxxx……..LTy2
HWxxxx…….RTy4
y1 y3
HWxxxx…….RBy3
r1 r2
HWxxxx………Rr2
r - Red y - Yellow
L - Left array R - Right array T - Top array B - Bottom array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2019-12-31
