CoaxStrip 6380

Coaxial Cable Stripping Machine

Precise and powerful with very fast cycle times

STRIPPING
 CoaxStrip 6380
Concept Programmable processing parameters:
The CoaxStrip 6380 is a fully programmable multi-step stripping Stripping position
machine for coaxial, triaxial and multi-conductor cable as well as single Incising diameter
conductor wire. Very fast cycle times, multiple steps with freely Centering jaw diameter
selectable stripping sequence, cable diameter verification, cable end Incising speed
detection, and automated cable retraction functions guarantee high Rotational speed of the stripping head
precision and reliability. With Schleuniger‘s standardized S.ON user Rotational direction of the stripping head
interface for simple programming, a sample programming library and Incising pause
1,000 program memory, this machine is ideal for low volume, quick Pull-off diameter
changeover applications as well as high volume production runs, giving Stripping lengths (partial strip or full strip)
the best possible flexibility and productivity for your production needs. Pull-off speed
Pull-off with or without rotation of the stripping head
Freely selectable stripping sequence
Cable clamping force

Technical Specifications
Raw Material Diameter Minimum 0.6 mm (0.024“)
Maximum 8 mm (0.314“)
Conductor Diameter Minimum 0.15 mm (36 AWG)
Diameter Increments 0.01 mm (0.001“)
Strip Length Maximum 40 mm (1.57“)
Strip Length Increment 0.01 mm (0.001”)
Stripping Steps Maximum 6
Clamping Motor driven with programmable clamping force
Cycle Time ≥ 3 s (depending upon cable type and programming)
Production Rate 400 - 800 pcs./h (depending upon cable type and programming)
Memory Capacity 1000 cables
Interfaces 2x USB, 2x Ethernet, 3x SMI (Option)
Noise Level 61 db (A)
Technical specifications subject to change © Schleuniger Group 3608 Thun, Switzerland

Power Supply 100-240 VAC, 50/60 Hz

Dimensions (L x W x H) 490 x 182 x 353 mm (19.3 x 7.2 x 13.9”)

Weight 19 kg (42 lbs.)

CE–Conformity The CoaxStrip 6380 fully complies with all CE and EMC equipment guidelines relative to
mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the
processing capabilities of a particular machine.

schleuniger.com To Be Precise.