P850C Manual

1st August 2020

01392 580040 [email protected] https://custombuilt-ebikes.co.uk

1． Features
 Suitable for low temperatures - Max -20℃.

 High-contrast 3.2inch IPS colour matrix screen.

 Ergonomic external button design, easy to operate.

 Speed display : AVG SPEED, MAX SPEED, SPEED(Real-time).

 Kilometer / Mile : Can be set according to your requirements

 Smart battery indicator : Provides a reliable battery indicator.

 9-level Assist : 3-level/5-level/9-level optional.

 Mileage indicator : Odometer/Trip distance/ Clock/ Riding time.

 Power/Current indicator : real time power indicator, digital or analogue or Current.

 Error code indicator.

 Light sensor（Optional ）

 Software upgradeable : Software can be upgraded through UART.

 USB charging port : 5V/500mA

2． TFT screen instructions

Clock Battery

Front Light Brake Signal

Power loop

Speed Scale
Speed value

Power
Power indicator

Power Scale Assist level

Mileage Time

Switchover area LOGO

3． Usage Description

7.1 Power On/Off

Press and hold the Power button for 1 second to turn the display on/off. The Display will
automatically shut down when it isn’t in use. You are able to set this between 1 and 9 minutes.

*If the display has been set to require a password to power on, you will need to input the right password at the
start.

7.2 Assist level operating

Short press UP/DOWN button to change the assist level. Top assist level is 9, 0 for no
assistance. Level amounts can be adjusted according to your requirements via the settings
menu (advanced area) or USB programming kit.
7.3 Speed & Mileage mode switch
Short press POWER button to change the speed and mileage mode,
TRIP→ODO→RANGE→TRIP→TIME→MAX SPEED→AVG SPEED

*Range needs smart BMS support.

**If there is no operation for 5 seconds, the display will return to the Speed (Real-Time) display automatically.

7.4 Headlight/backlight On/Off

Press and hold the UP button for 1 second to turn on/off the headlight, and the screen will
switch to the corresponding mode (only if integrated headlight is fitted).

*The motor will stop operating when you battery gets too low to ensure your battery is not damaged. However,
for a while the light will still operate so that you can safely pedal home without motor assistance.

Daytime mode night mode

 7.5 Walking mode (6km)
Press and hold DOWN button for 2 seconds to select walking mode. Walking mode provides a
small amount of power to help you push your bike along if walking.

* This feature needs to be supported by controller.

7.6 Data cleanup

Press and hold UP & DOWN buttons together for 1 second to reset your ride statistics such as
AVG Speed / MAX Speed / Trip / Time. These are not erased by power off.

4． Settings menu
Double press the POWER button (press interval less than 0.3 seconds) to enter the setting menus,
press UP/DOWN buttons to change the parameter setting, press POWER button to switch to the
next item. Double press the POWER button to exit from the menu.

* Display will automatically quit the settings menu when there is no operation for 30 seconds.

* For safety reasons, you can’t enter the settings menu when riding

* Display will quit the settings menu when you start riding.

The order of parameters are as follows.

8.1 Language：Default EN ，Un adjustable

8.2 System : Press Up / Down button to switch between Metric / Imperial.

8.3 Brightness : Press Up / Down button to change the brightness of the backlight, ‫ ׀‬is dark，‫ ׀׀׀׀׀‬is
very bright, default value is ‫׀‬.

Note : You can set the brightness independently between Daytime mode and Night mode.
8.4 Auto off : Press UP/DOWN button to change the auto power off time, from 1 to 9/OFF. The
numbers represent minutes. When off is selected, the screen will only turn off when the on/off
button is pressed. By default, this is set to 5 minutes.

8.5 Scenes : Analogue only

8.6 Battery Ind : Press UP/DOWN button to change the battery indicator, Voltage / Percentage /
OFF.

*Accurate percentage needs a specialist battery

 Voltage Percentage OFF

8.7 Pow Ind : Press UP/DOWN button to change the Power indicator, Power / Current.

* This data represents the power output of the battery (not motor).

8.8 Clock : Clock setting, press POWER button get into the clock setting menu, press the
UP/DOWN button to set Year/Month/Day/Hour/Min/Sec.
Note : There is a battery inside the screen to ensure the clock keeps time even when display is powered off. This battery is charged when the

screen is turned on. If you don’t use your bike for a very long period of time, it can go flat.

8.9 Start password : Press the POWER button to get into the password setting menu. If you had
set Start input ON, you must enter the correct password before powering on.

Start Input Start Input Start Input Start Input

Password Password Password Password

BACK BACK BACK BACK

Start input OFF Start input ON Start input ON Start input ON
Setting Password Setting Password Setting Password Setting Password

0 0 0 0 0 0 0 0 1 0 0 0 1 2 3 4

You need to input the right password within 30 seconds at power up, or the display will power down.
 Basic Settings

*Press the DOWN button to move the red arrow to , press POWER button to show all

items of the Basic Setting.

8.10 Wheel : Press UP/DOWN to change the wheel size setting. The wheel diameter optionals are
16/18/20/22/24/26/27/27.5/28/29/30/31 inch,

8.11 Battery : This option is not set for a Bafang motor.

8.12 USB Port：press UP/DOWN level, select OFF/ON. When off is selected, the USB port is
disabled.

8.13Light sensor：Press switch Button to adjust the light sensor options. Press the UP/DOWN
button to select OFF/ON. The sensitivity can then be sent using UP/Down to high, medium or
low.

8.14 Advance setting : Pressing the POWER button allows you to get into the advance setting
menu. The default password is ‘1919’.

Speed limit Assist levels Error code

8.15 Speed limit : Pressing UP/DOWN will change speed limit. The allowable options are
10km/h~45km/h. The default value is 25km/h. Please note that the UK legal limit on roads is
25KPH or 15.5MPH.

Advance Setting Advance Setting Advance Setting

Speed limit 10km/h Speed limit 25km/h Speed limit 45km/h
Assist levels 5 Assist levels 5 Assist levels 5
Error code Error code Error code
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --

BACK BACK BACK

EXIT EXIT EXIT

*The speed limit and current limit are restricted by controller and motor.
8.16 Assistance levels : This setting allows you to customise the assistance levels, options
are 3/5/9/UBE, UBE represent factory default settings.

Advance Setting Advance Setting Advance Setting Advance Setting

Speed limit 25km/h Speed limit 25km/h Speed limit 25km/h Speed limit 25km/h
Assist levels 3 Assist levels 5 Assist levels 9 Assist levels UBE
Error code Error code Error code Error code
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

BACK BACK BACK BACK

EXIT EXIT EXIT EXIT

8.17 Error code ：This displays the last 10 error codes.

Advance Setting
Speed limit 25km/h
Assist levels 5
Error code
04 09 11 21 08
30 24 12 23 07

BACK
EXIT

8.18 Factory setting : Press the POWER button to Restore Factory setting - setting YES will
restore all parameter to factory defaults.

Restore Restore
Factory Settings Factory Settings

BACK BACK
YES YES

...

8.19
8.20Information : Shows information about your ebike.

Information
Speed
AVG 15.4 Km/h
Max 32.4 Km/h
Mileage
Trip 9999.9 Km
ODO 99999.9 Km
Range 59.9 Km

BACK
Product Infor
Battery Infor

8.21 Product info : This shows the hardware and software versions.

Information Product Information

Speed Version
AVG 15.4 Km/h Hardware ver. 2.0
Max 32.4 Km/h Software ver. 1.0F-V1
Mileage Product Informations
Trip 9999.9 Km Date
ODO 99999.9 Km Serial No
Range 59.9 Km

BACK EXIT
Product Infor
Battery Infor

8.22 Battery info : This area shows: Voltage, Current, Avg Current, Cycle times, Capacity,
Remaining Capacity , Full Charge Capacity , Temperature, Max Tempt, Min Tempt , Relate
ChgSta , Absolute ChgSta , Max Uncharge Times , Last Uncharge Times , CorVolt-1.

*This information needs to be supported by battery communication.

Information Battery Information Battery Information

Speed Voltage 42.0V Temperature -35.5℃
AVG 15.4 Km/h Current -1536mA Max Tempt 0.9℃
Max 32.4 Km/h Avg Current -1536mA Min Tempt -0.9℃
Cycle times 278 Relate ChgSta 99%
Mileage
Capacity 90% Absolute ChgSta 99%
Trip 9999.9 Km
Remaining Capacity Max Uncharge Times
ODO 99999.9 Km 8192mAh 257 h
Range 59.9 Km Full Charge Capacity Last Uncharge Times
8192mAh 257 h
BACK CorVolt-1 097mV
Product Infor
Battery Infor NEXT PAGE
EXIT EXIT
5． Error Codes

850C can show warning messages. The icon shows that there is an error code, displayed on
the bottom of the screen.

Error Code Error description Error diaplay

0x01 Normal No error
0x03 Brake signal No error
0x04 Throttle on high position Display 04H on LOGO position
0x05 Throttle error Display 05H on LOGO position
0x06 Low voltage protection Display 06H on LOGO position
0x07 High voltage protection Display 07H on LOGO position
0x08 Motor’s hall sensor error Display 08H on LOGO position
0x09 Phase line of motor error Display 09H on LOGO position
0x10 Controller over temperature Display 10H on LOGO position
0x11 Motor over temperature Display 11H on LOGO position
0x12 Current sensor error Display 12H on LOGO position
Battery’s temperature sensor
0x13 Display 13H on LOGO position
error
Motor‘s temperature sensor
0x14 Display 14H on LOGO position
error
controller‘s temperature
0x15 Display 15H on LOGO position
sensor error
0x21 Speed sensor error Display 21H on LOGO position
0x22 BMS communication error Display 22H on LOGO position
0x23 Head light error Display 23H on LOGO position
0x24 Head light sensor error Display 24H on LOGO position
0x25 Torque sensor error-Torque Display 25H on LOGO position
0x26 Torque sensor error-speed Display 26H on LOGO position
0x30 Communication error Display 30H on LOGO position
6． Assembly instructions
Please pay attention to the screw’s maximum torque value. Damage caused by over tightening
of the bolts is not covered by warranty.

There are 2 options for the clamp installation, forward or backward.

The clamps suit 3 sizes of handlebar - 31.8mm, 25.4mm and 22.2mm. There are optional rubber
spacer rings for 25.4mm and 22.2mm handlebars. When using the rubber spacers, pay attention to
the green arrow below.
7． Connector descriptions

1、 Red wire : Anode(24v/36v/48V)

2、 Blue wire : Power cord to the controller
3、 Black wire : GND
4、 Green wire : RxD (controller -> display)

5、 Yellow wire : TxD (display -> controller)

8． Assistance level instructions

The assistance levels can be customised. The highest level is 9, commonly used assistance
levels are shown below.
3 level 5 level 9 level
0 0 No power assist
1 1
2
1 2 3
4
3 5
2 6
4 7
8
3 5 9

9． Certification
CE / IP65 (water proof) / ROHS.
10． Specifications
 3.2inch IPS screen

 24V/36V/48V battery supply

 Rated operating current : 40mA

 Max operating current : 100mA (36V battery, with USB equipment changed)

 USB changing port : 5V 500mA

 Off leakage current < 1uA

 Max output current to controller : 100mA

 Operating temperature : -20～70℃, Storage temperature : -30～80℃

 Product shell is ABS, transparent window is made with high strength Acrylic.

 Dimensions : host/L92mm*W60mm*H14mm

11． Dimensions & Material

 Product shell is ABS, transparent window is made with high strength Acrylic.

 Dimensions : host/L92mm*W60mm*H14mm