Questionnaire for Walkthrough Initial Energy Audit for an Office Building in a University:

General Information:

a) What is the name and location of the office building in the university?

b) What is the total floor area of the building?

c) How many occupants work in the building?/how many occupants typically use the classroom?

d) What is the typical operating schedule of the building (e.g., hours of operation, weekends, holidays)?

Building Envelope:

a) What materials make up the walls, roof, and floor of the classroom?

a) Are there any noticeable air leaks or drafts in the building?

b) Are there any windows or doors that do not seal properly?

c) What is the condition of the insulation in the walls, roof, and floors?

d) Are there any signs of moisture intrusion or water damage in the building envelope?

Lighting:

a) What type of lighting is used in the building (e.g., incandescent, fluorescent, LED)?
b) how many light fixtures are present and what is their wattage?

b) Are there any areas where lighting is left on unnecessarily?

c) Are there any opportunities for natural lighting or daylighting in the building?

d) Are there any motion sensors or occupancy sensors installed in the lighting system?

HVAC Systems:

a) What type of HVAC system is used in the building (e.g., central air conditioning, heat pumps, individual
units)?

b) Are the HVAC systems well-maintained, with clean filters and proper airflow?

c) Is there any evidence of air leakage in the ductwork or HVAC system?

d) Are there any areas that are over-conditioned or under-conditioned in terms of temperature?
Equipment and Appliances:

a) What types of equipment and appliances are used in the building (e.g., computers, printers,
refrigerators)?

b) Are the appliances energy-efficient and ENERGY STAR certified?

c) Are the appliances and equipment turned off when not in use, or is there any standby power
consumption?

d) Are there any outdated or inefficient appliances that could be replaced with more energy-efficient
models?

Windows and Insulation:

a) How many windows are in the classroom, and what is their condition?

b) Do the windows have any seals or weatherstripping issues?

c) Is there any insulation in the walls, ceiling, or floors of the classroom?

d) Are there any signs of air leaks or drafts around windows, doors, or walls?

Energy Management:

a) Is there an energy management system or software in place to monitor and control energy usage?

b) Are there any energy conservation initiatives or programs implemented in the building?

c) Are occupants educated or informed about energy-saving practices and encouraged to participate?

d) Are there any sub-metering systems in place to monitor energy consumption in specific areas or
equipment?

Renewable Energy Opportunities:

a) Are there any renewable energy systems installed or planned for the building (e.g., solar panels, wind
turbines)?

b) Is the building suitable for the installation of renewable energy systems?

c) Has the feasibility of renewable energy generation been assessed for the building?

Additional Comments or Observations:

a) Are there any specific areas of concern or potential energy-saving opportunities that should be
addressed?

b) Is there any other relevant information or details about the building that should be considered during
the energy audit?
Conducting a walkthrough energy audit typically involves several steps. Here are the general steps
involved in conducting a walkthrough energy audit:

Gather Information:

a) Obtain relevant information about the building, such as its size, age, construction materials, and
occupancy patterns.

b) Gather utility bills and energy consumption data for the building over a specified period.

Preliminary Analysis:

a) Review the building's energy bills and consumption data to identify any major energy usage patterns
or anomalies.

b) Conduct a preliminary assessment of the building's energy systems, including lighting, HVAC, and
appliances.

Schedule and Plan the Audit:

a) Determine the scope and objectives of the energy audit.

b) Establish a timeline and schedule for the audit process, including walkthrough inspections and data
collection.

c) Plan the necessary resources, tools, and equipment needed for the audit.

Walkthrough Inspection:

a) Conduct a detailed walkthrough inspection of the building, examining each area and component
related to energy consumption.

b) Identify energy-saving opportunities and areas of improvement, such as inefficient equipment, air
leaks, or inadequate insulation.

c) Document observations, take measurements, and gather relevant data during the walkthrough.

Data Collection and Analysis:

a) Collect detailed information on energy-consuming systems and components, including lighting, HVAC,
appliances, and building envelope.
b) Use measurement tools and instruments to record data on energy consumption, temperature, airflow,
and other relevant parameters.

c) Analyze the collected data to identify energy inefficiencies, patterns, and potential energy-saving
measures.

Energy Modeling (if applicable):

a) Utilize energy modeling software or tools to simulate energy usage and assess the impact of potential
energy-saving measures.

b) Evaluate the feasibility and cost-effectiveness of different energy conservation measures and their
potential energy savings.

Identify Energy Conservation Measures (ECMs):

a) Based on the findings from the walkthrough inspection and data analysis, identify specific ECMs that
can improve energy efficiency.

b) Prioritize the ECMs based on their potential energy savings, cost-effectiveness, and feasibility of
implementation.

Report and Recommendations:

a) Prepare a comprehensive energy audit report that includes the findings, analysis, and recommended
energy conservation measures.

b) Present the report to stakeholders, including building owners, facility managers, or relevant decision-
makers.

c) Provide clear recommendations for implementing the identified ECMs, along with estimated costs,
savings potential, and payback periods.

Implementation and Monitoring:

a) Collaborate with building owners, facility managers, or relevant personnel to implement the
recommended energy-saving measures.

b) Monitor and track energy consumption and savings after the implementation of ECMs to evaluate the
effectiveness of the measures.

Ongoing Energy Management:

a) Promote energy-conscious behaviors and practices among building occupants.

b) Establish an ongoing energy management program to continuously monitor, optimize, and improve
energy efficiency in the building.
Analyzing the data

Analyzing the data collected during a walkthrough energy audit involves examining the information
gathered and identifying patterns, trends, and potential energy-saving opportunities. Here are some key
steps to analyze the data from a walkthrough energy audit:

Review the Data:

Organize and compile all the collected data, including energy consumption figures, measurements, and
observations.

Ensure the data is accurate, complete, and properly labeled for each specific area or component of the
building.

Identify Baseline Energy Consumption:

Establish a baseline energy consumption level by reviewing historical energy bills or consumption data.

Compare the current energy usage to the baseline to identify any significant deviations or anomalies.

Identify Energy Consumption Patterns:

Analyze the energy consumption data over time to identify patterns, such as daily or weekly usage
trends.

Look for any noticeable spikes or fluctuations in energy consumption that may indicate inefficiencies or
abnormal usage.

Assess Energy End Uses:

Break down the energy consumption data by end-use categories, such as lighting, HVAC, appliances, and
plug loads.

Determine the percentage of energy consumed by each category and identify areas with the highest
energy consumption.

Evaluate System Performance:

Analyze the performance data collected during the walkthrough, such as temperature readings, airflow
measurements, and equipment operating conditions.
Identify any issues or inefficiencies in the building's systems, such as HVAC systems operating outside
recommended ranges or equipment running continuously.

Compare Data to Benchmarking Standards:

Compare the energy consumption data of the building to relevant benchmarking standards or energy
performance indicators.

Assess how the building's energy usage compares to similar buildings or industry standards to identify
areas for improvement.

Identify Energy-Saving Opportunities:

Analyze the data and observations to identify specific energy-saving opportunities and potential
improvements.

Look for areas where energy consumption is high or inefficient, such as outdated equipment, air leaks, or
excessive lighting levels.

Prioritize Energy Conservation Measures (ECMs):

Based on the analysis, prioritize the identified energy-saving opportunities and ECMs based on their
potential impact, cost-effectiveness, and feasibility of implementation.

Consider the payback period, return on investment, and any other relevant factors when prioritizing the
measures.

Develop Recommendations:

Prepare a detailed report outlining the findings, analysis, and recommended energy conservation
measures.

Provide clear recommendations, including the specific ECMs, estimated energy savings, associated costs,
and implementation strategies.

Track and Evaluate Results:

After implementing the recommended ECMs, monitor and track the building's energy consumption to
assess the effectiveness of the measures.

Compare post-implementation energy data to the baseline and evaluate the achieved energy savings and
the return on investment.
By analyzing the walkthrough energy audit data thoroughly, you can identify areas of improvement and
develop targeted strategies to enhance energy efficiency and reduce energy costs in the building.