MS100-30 (M-30® Meter Specifications)
Specifications M-30® Meters
Liquid Controls M and MA Series rotary motion positive displacement (PD)
meters offer the ultimate in measurement accuracy for custody transfer of
petroleum products, aviation fuels, LPG, and a broad range of industrial liquids.
Superior performance features Industries served
LC M and MA series
meters are well suited for
Low pressure drop - will operate on gravity flow or pump pressure.
use in industries requiring
precise flow measurement
Sustained accuracy - no metal-to-metal contact inside the measuring and reliable, extended
chamber means minimal wear and deterioration in accuracy over time, service life:
fewer recalibrations, and longer service life. Meters conform to NIST and
International Weights and Measures accuracy requirements. • Refined petroleum
products
Wide viscosity range - LC meters can accurately meter products from • Aviation fuels
• LPG
less than 30 SSU (less than 1 centipoise) to 1,500,000 SSU (325,000 • Agricultural chemicals
centipoise). • Paints and coatings
• Foods and beverages
Maximum adaptability - choice of stock or custom elbows/fittings • Petrochemicals
• Pharmaceuticals
provides unequaled mounting flexibility to meet widely varying installation • Cosmetics
requirements. • Printing Inks
• Textiles
Accuracy/Performance* Construction
Repeatability
Meter housing and rotors
Capable of 0.02% or better at any flow rate over entire range
Cast aluminum or cast-iron
Linearity
Internal components
Over 5:1 range
Aluminum, Ni-Resist,
Mech. registration: capable of ± 0.125% or better from max. nom. flow rate
stainless steel
Elect. registration: capable of ±0.10% or better from max. nom. flow rate
Seal materials
Over 10:1 range
UL recognized component:
Mech. registration: capable of ±0.22% or better from max. nom. flow rate
Buna-N, Viton®1, Teflon®1
Elect. registration: capable of ± 0.10% or better from max. nom. flow rate
Bearings
Over 40:1 range
Carbon, Teflon, Ni-Resist
Mech. registration: capable of ±0.5% or better from max. nom. flow rate
Elect. registration: capable of ±0.15% or better from max. nom. flow rate 1
Viton and Teflon are
registered trademarks of
Temperature range
DuPont Corporation.
-40° F to 160° F (-40° C to 71° C)
*Stated accuracy obtainable when all variables remain constant. Reading/measurements
reflect a minimum of one minute of flow at selected rate(s). All accuracy statements
based on metering safety solvent (aliphatic hydrocarbon), approximate viscosity 1 CPS.
On higher viscosity products, the average deviation in accuracy will be less.
Front View
Top View
K
7 7/8"
L N
A J O
M
I
B
Mounting plate F F
C
E Dimensions: flow meters with electronic registration
G G Note: Dimensions shown are not for construction use.
Consult factory when certified engineering prints are required.
F F D H
Max. nom. Working Dimensions Net
Model Flange size
Flow rate pressure A B C D E F G H I J K L M N O Wt
M-30® 350 GPM 150 PSI in 20.5 10.6 5.6 9.1 0.87 4.8 7.9 n/a 13.8 19.4 1.4 7.1 12.3 6.6 7.7 120 lbs
3" or 4"
(1325 L/min) (10.5 BAR) mm 521 270 143 230 22 122 200 n/a 351 494 36 181 313 167 195 (54.4 kg)
Ordering Information Bearing
Class Description Material
Model : _____ - _____ - _____ - _____ 1 Refined petroleum products Ni-Resist1
2 Aviation and jet fuel Ni-Resist1
Description : ________________________________________ 3 Variety of products includes: Ni-Resist1
liquid sugars, sweeteners, syrups,
Flow rates: Max. __________ Normal __________ Min. _____________ vegetable oils
4 Treated waters and solvents where Carbon
Operating temperatures: Max. __________ Normal _________ Min. __________ no red metals are allowed
7 Chlorinated solvents Carbon
Maximum non-shock operating pressure: ________________________________ 14 Crude oil Ni-Resist
15 Oil - or water-bases latex products, Teflon
Maximum viscosity: _________________ @ _________________ (Temp°/F or C) polyester resins, adhesives,
herbicides, nitrogen fertilizers
Specific gravity: ____________________ @ _________________ (Temp°/F or C) 16 General solvents Carbon
27 Alkaline pH liquids; latex Teflon2
Construction class: (1, 2, etc.)__________ products, adhesives,
liquid fertilizers
Seal material: Standard Buna/Viton All Viton All Teflon 37 Sodium hydroxide solutions, high Ni-Resist
sulfur crude oil, alkaline pH liquids
Direction of flow: L to R R to L 47 Mildly abrasive liquids Ceramic³
1
Read out: Gallons Liters Pounds Other________________ Carbon bearings are standard on some meter sizes of this
class. Consult factory.
2
Mechanical counter and printer: Zero/Face up Zero/Face down Accumulative Teflon bearings optional on some meter sizes. Consult
factory.
3
Strainer basket : 40M 80M 100M Other________________ Consult factory
Flange size: ___________
Flange type: NPT BSPT Slip weld ANSI DIN Other____________
Options:______________________________________________________________
A Unit of IDEX Corporation ISO 9001 ISO 14001
105 Albrecht Drive
Lake Bluff, IL 60044-2242
1.800.458.5262 • 847.295.1050 © 2019 Liquid Controls
www.LCmeter.com MS100-30 CERTIFICATED FIRM
Certificate No. 08732
CERTIFICATED FIRM
Certificate No. 05049
