Scribd
Upload
50 views1 page

G 032 008 - DuraGrid X - DataSheet

DuraGrid X is a polypropylene geogrid manufactured through extrusion and stretching processes. It is certified to ISO9001 and CE standards. The geogrid is used to reinforce soils in applications such as subgrade stabilization, embankments, slopes, and base reinforcement. DuraGrid X comes in 20/20, 30/30, and 40/40 grades with varying tensile strength, stiffness, and junction strength properties suited for different project needs.

Uploaded by

Jpver1000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views1 page

G 032 008 - DuraGrid X - DataSheet

DuraGrid X is a polypropylene geogrid manufactured through extrusion and stretching processes. It is certified to ISO9001 and CE standards. The geogrid is used to reinforce soils in applications such as subgrade stabilization, embankments, slopes, and base reinforcement. DuraGrid X comes in 20/20, 30/30, and 40/40 grades with varying tensile strength, stiffness, and junction strength properties suited for different project needs.

Uploaded by

Jpver1000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DURAGRID X

PP GEOGRID
TECHNICAL DATA SHEET
ISSUE NUMBER
DATE
G 032 008
02
JUNE 2019

DuraGrid X Geogrid is an integrally formed structure, which is especially designed for soil stablisation and reinforcement applications. DuraGrid X is manufactured from polypropylene, from the process of extruding, longitudinal stretching and
transverse stretching. DuraGrid X is manufactured in a facility that has achieved ISO9001 certification and has passed the CE certification.
Typical Applications include but are not limited to: subgrade and embankment stabilisation, vertical load distribution and base/slope reinforcement.

DuraGrid X conforms to the property values listed below.

DURAGRID X 20/20 DURAGRID X 30/30 DURAGRID X40/40


PHYSICAL PROPERTIES TEST METHOD UNITS
MD/TD MD/TD MD/TD

APERTURE DIMENSIONS 4mm Measured (Nominal) mm 36/36 36/36 34/34

ULTIMATE TENSILE STRENGTH ASTM D 6637 kN/m 20.0/20.0 30.0/30.0 40.0/40.0

TENSILE STRENGTH AT 2% STRAIN ASTM D 6637 kN/m 7/7 10.5/10.5 14/14

TENSILE STRENGTH AT 5% STRAIN ASTM D 6637 kN/m 14/14 21/21 28/28

RADIAL STIFFNESS AT 0.5% Note 3 kN/m 390 580 760


JUNCTION STRENGTH GRI GG2 % 93% 93% 93%

CARBON BLACK ASTM D 4218 % 2 2 2

ROLL WIDTH x LENGTH Measured m 3.95 x 50 3.95 x 50 3.95 x 50

NOTES:
1. Cirtex Industries Ltd reserves the right to alter product specifications at any time without prior notice. It is the responsibility of all users to satisfy themselves that the above data is current and that the product is suitable for its intended end use.
2. Polypropylene is the constituent polymer used in the production of DuraGrid X.
3. Cirtex Industries Ltd uses internationally recognised test methods to measure radial stiffness, including ISO 10319/ASTM6637 Wide Width testing and DIN 61551 radial testing. Please contact our technical team for more information.

DISCLAIMER This product has been manufactured under the


The information provided in this publication is correct to the best knowledge of the company and is given out in good faith. The information presented herein is intended only as a general guide to the use controls established by Bureau Veritas certification
of such products and no liability is accepted by Cirtex Industries Ltd for any loss or damage however arising, which results either directly or indirectly from the use of such information. Cirtex Industries Ltd approved management system that conforms with
has a policy of continuous development so information and product specifications may change without notice. ISO 9001:2015. Bureau Veritas Certification certificate
number NZ 001784-1

0800 CIRTEX (247 839) I WWW.CIRTEX.CO.NZ

You might also like