eCATALOGUE

South East Asia

WOR LD LEA D ER O F INNOVATIV E SOLUTIO NS IN FIRE DETECT I O N AN D AL ARM S YS T E MS

SEA/PAGE 1 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AMPAC TECHNOLOGIES

Ampac Technologies was founded in 1974. With the adoption of CONTROL PANELS 3
three basic core principals, we have grown from a small innovative
GasRelease Conventional .................................................................................................. 3
Australian entity, to a global operation in key markets. Our business LoopSense Intelligent .......................................................................................................... 8
is the design, manufacture and distribution of world leading fire FireFinder Conventional/Intelligent .......................................................................... 13
detection and alarm systems for commercial, industrial, and mulit-
residential complexes. DETECTORS 23
Orbis Conventional ............................................................................................................... 23
At Ampac, we strive to maintain and improve the vitality of our DS-Series .................................................................................................................................... 27
customer relationships for it is through understanding the needs XP95 Intelligent ...................................................................................................................... 31
of our customers that we can truly achieve sustained long term Discovery Intelligent ........................................................................................................... 37
growth. Our aim is to ensure that the entire life cycle of our products
INTERFACES 45
is supported by our comprehensive after sales service.
XP95/Discovery Intelligent.............................................................................................. 45
Ampac I/O Devices ............................................................................................................... 55
It is a business we are very passionate about. Along the way, we have
gained the reputation of a company that operates with integrity WIRELESS TECHNOLOGY 58
coupled with a clear focus and commitment – providing customers
Xpander Detectors ............................................................................................................... 58
at every level with superior customer service. It is a philosophy we
Xpander Call Points ...............................................................................................................60
continue to improve upon. Ampac is a business focused on long Xpander Sounders/Sounder Beacons .......................................................................61
term growth. While we always consider the implications on a wider Xpander Ancillaries .............................................................................................................. 62
scale, no detail, imperative for the success of any undertaking, is
compromised. AUDIO VISUAL SIGNALLING 63
XP95/Discovery Sounder, Beacon & Sounder Beacon Bases .................... 64
XP95/Discovery Sounders, Beacons & Sounder Beacons ............................ 67
Ampac Bells, Strobes & Remote Indicators ............................................................ 72
Fulleon Sounders & Beacons .......................................................................................... 75
KAC Manual Call Points ...................................................................................................... 79
Klaxon Sounders & Beacons ........................................................................................... 81

(HEAD OFFICE)

SEA/PAGE 2 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS

GasRelease
Conventional Agent Release Panel
GasRelease is the new compact conventional 3 zone fire control panel that includes
additional circuitry for controlling the release of extinguishing agents into protected
areas. Fully compliant with EN12094-1, GasRelease is ideal for applications housing
expensive, dangerous or irreplaceable items. Supported by a wide range of ancillaries,
GasRelease is a powerful partner for automatic fire suppression systems.


Functions as a standard three zone fire panel with additional circuitry for controlling
the release of fire-suppressing gas into protected areas
• 
Unique 128 x 64 pixel graphical display facilitates straightforward system
programming
• 
Includes a pull-down front panel manual release button and two keyswitches for
accessing the panel’s functions and toggling between auto/manual mode
• Three conventional sounder circuits (two x 1st stage, one x 2nd stage)
• Low quiescent current – less than 40mA
• 
Abort and hold inputs
• 
Time-stamped event log
• 
RS485 connections for up to eight flush or surface remote status units with their own
LCD, manual release and mode (auto/manual) switches. Single gang economy status
units (without an LCD) are also available
• 
Extensive range of commissioning and engineering functions
• 
Ideal for use in computer rooms, telecommunication centres, archive stores, control
rooms, generator rooms, museums, etc

SEA/PAGE 3 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS GASRELEASE Conventional

Power Supply
Input Voltage 230VAC, 50/60Hz
Output Voltage 24VDC nominal
Battery Type (maximum) 7 Ahr
Quiescent Current 40mA
Power Supply 3 Amp Switch Mode
PSU output current 1.5 Amp cont. 3 Amp peak

Zone Circuits
Detector Circuits 3 x fully monitored
Fault Supervision O/C & S/C
Cable Requirements 2 core 1.5 to 2.5mm
Max Cable Length 250m
Max Detectors/Devices per zone 32
End of Line (EOL) value 6K8 ohm ± 5%, 0.25W

General Outputs
Alarm Sounder Outputs 3 x fully monitored
Fault Supervision O/C & S/C
Sounder Output Rating 19-28VDC @ 200mA each
GasRelease Panel End of Line (EOL) value 6K8 ohm ± 5%, 0.25W
Auxiliary Relay Outputs 6 x 1 Amp rated @ 30VDC
Fire
Local Fire
Extract
1st Stage
2nd Stage
Fault
Auxiliary Power Output 19-28VDC 100mA fused

Extinguishing Release Outputs

Extinguishant Release Output 1 amp @19-28VDC for 5 mins
Extinguishant Release Time Delay 0-60 seconds – adjustable
Extinguishant Release Duration 0-300 seconds – adjustable
Extinguishant Release Flooding Time 60-1740 seconds – adjustable
Extinguishant Output EOL System Line Terminator
(part number 2980-0005)

SEA/PAGE 4 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS GASRELEASE Conventional

Inputs
Supervised Inputs 6 x fully monitored
Manual release
Flow switch
Low Pressure
Mode
Hold
Abort
End of Line (EOL) value 6K8 ohm ± 5%, 0.25W
Remote Inputs 4 x Switched inputs
Silence
Alarm
Fault
Reset

Communication Outputs
Remotes Status Units (RSU) RS485 4 wire
(2 wire 24VDC power – 2 wire RS485)
Economy Status Units (ESU) 4 wire
(2 wire 24VDC power – 2 wire Mode select)
GasRelease Panel
Environmental
Operating temperature -5°C to +40°C (no icing)
Relative Humidity 0 to 95% (non condensing)
IP Rating IP30 indoor use only

Mechanical
Material Back box metal – lid plastic
Finish Light Grey
Dimensions 297H x 467W x 99D mm
Weight 4.2kg (without batteries)

GasRelease Panel – 3 Zones 2983-0304

SEA/PAGE 5 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS GASRELEASE Conventional

Remote Status Unit

• Remote indication of system status

• Clear two colour LCD display and LED indicators Voltage 21-28 VDC
Quiescent current 10 mA
• Plain text display
Communication input RS485 4 wire
• Mode select – auto/manual key switch [2 wire 24 VDC power 2 wire RS485]
• Dual action extinguishant manual release button Max no. of RSUs 8 per system
• Flush or surface mounting options Monitored inputs 3 - Abort, Hold, Mode
• 4 wire RS485 connection Status display 128 x 64 pixel 2 colour backlit LCD
Dimensions 250H x 175W x 53Dmm (flush)
240H x 160W x 51Dmm (surface)
Weight 1600 grams

Remote Status Unit (Flush) 2980-0001

Remote Status Unit (Surface) 2980-0002

Economy Status Unit

• Remote indication of system status

• Mode select – auto/manual key switch Voltage 21-28 VDC
Quiescent current 5 mA
• Simple LED indication
Communication input 4 wire
• Flush mounting [2 wire 24 VDC power 2 wire
• Surface mounting option with single gang back box mode select]
• 4 wire connection Max no. of ESUs 8 per system
Dimensions 87H x 87W x 35Dmm
Weight 70 grams

Economy Status Unit 2980-0003

SEA/PAGE 6 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS GASRELEASE Conventional

Extinguishant Hold Off/Abort Button

• Delays or cancels the extinguishing release sequence

• Monitored input to the GasRelease panel Monitored input threshold 8K to 2K (normal)
1.8K to 200ohms (active)
• 2 wire connection
End of Line 6K8
• Single gang surface mounting Ingress protection IP66
• Monitored for open and short circuit faults Dimensions 93H x 93W x 78Dmm
Weight 250 grams

Extinguishant Hold Off/Abort Button 2980-0006

Output Expansion Relay Board

• Five voltage free relay outputs

• Installed within and directly controlled by the GasRelease panel Relay outputs 5 x 30 VDC 1 Amp
Max no. of boards 1 per system
• Outputs for Reset, Mode, Discharged, Hold and Abort
Operating current 8 mA per active relay
Dimensions 160 x 70mm
Weight 60 grams

Output Expansion Relay Board 2980-0004

System Line Terminator

• Terminates the GasRelease panel extinguishing output to the

release actuators Dimensions 55H x 55W x22Dmm
Weight 27 grams
• Maximum two solenoids or multiple Metrons™ are supported
• Suitable for mounting in an appropriate junction box
• Red active LED indicator

System Line Terminator 2980-0005

SEA/PAGE 7 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS

LoopSense
Intelligent Control Panel 952a

LoopSense is an Intelligent Analogue Addressable Fire Alarm Control Panel. Available

in one or two loops, the LoopSense comes packed with options and features that
facilitate flexibility, ease of installation and commissioning.

• 
Clear back-lit 40 x 4 line character LCD
• Advanced balanced loop design for noise rejection
• 500mA loop current
• Integrated 32-Zone Indication card
• Laptop connection via USB 2.0 or RS232 port
• Auto Learn Facility
• Removable front door and chassis
• LoopMaster – user friendly programming software
• Fully approved to EN54-2 & 4 by the Loss Prevention Certification Board (LPCB)

SEA/PAGE 8 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS LOOPSENSE Intelligent

Metal ABS
Power Supply (General)
Output Voltage 27.5VDC +/- 0.1VDC 27.5VDC +/- 0.1VDC
Battery Type (maximum) 17.2Ah 7.0Ah
Battery Discharged Cut Off Voltage 21VDC 21VDC

Base Panel
Quiescent Current
1 Loop Panel 115mA 115mA
2 Loop Panel 135mA 135mA

Loop
Loop current 500mA max 500mA max
Detectors/Devices per Loop 126 max 126 max
Cabling Requirements 2 core 1.5 to 2.5mm 2 core 1.5 to 2.5mm
LoopSense – ABS Cabinet LoopSense – Metal Cabinet Fault supervision O/C, S/C, overcurrent O/C, S/C, overcurrent
(Approved to EN54-2 & 4)
Protocol XP95, Discovery XP95, Discovery

Outputs
Alarm Sounder Outputs 4 x supervised/programmable 4 x supervised/programmable
24VDC @ 500mA max 24VDC @ 500mA max
Relay outputs 3 x programmable 3 x programmable
Voltage free 24VDC @ 1A Voltage free 24VDC @ 1A
Open Collector Output 2 x programmable – 30mA 2 x programmable – 30mA
Auxiliary VDC 2 x protected/programmable 2 x protected/programmable
24VDC @ 500mA 24VDC @ 500mA

Inputs
Supervised 4 x O/C, S/C, 10K EOL 4 x O/C, S/C, 10K EOL

Communications Port
Internal to LoopSense RS485 RS485
LoopSense SmartTerminal LoopSense SmartTerminal External to LoopSense RS485 RS485
Repeater Slim Line Repeater Printer port RS232 or Parallel RS232 or Parallel
PC Interfacing RS232 or USB 2.0 RS232 or USB 2.0

SEA/PAGE 9 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS LOOPSENSE Intelligent

Metal ABS
Electrical
Power Supply 3A PSU version 2A PSU version
Input Voltage 204 - 264VAC 204 - 264VAC
Protection 3Amp M205 2Amp M205
Output Current 3Amps 1.8Amps
Charger Current 600mA 400mA

Environmental
Operating temperature -5°C to +55°C (no icing) -5°C to +55°C (no icing)
Relative humidity 25% to 75% (non condensing) 25% to 75% (non condensing)
IP rating IP30 IP30

Mechanical
Material 1.2mm steel ABS Blend/High Impact
LoopSense – ABS Cabinet LoopSense – Metal Cabinet Finish Surf Mist Ripple Cool Grey
(Approved to EN54-2 & 4)
Dimensions 425H x 400W x 125Dmm 300H x 360W x 100Dmm
Weight 7kg 2.5kg

NEW LoopSense Intelligent Control Panel

1 Loop, 500mA capacity, 32 Zone, 4 alarm circuits, 2 Amp PSU, ABS 8281-0101
2 Loop, 500mA capacity, 32 Zone, 4 alarm circuits, 2 Amp PSU, ABS 8281-0201
1 Loop, 500mA capacity, 32 Zone, 4 alarm circuits, 3 Amp PSU, Metal * 8281-0105
1 Loop, 500mA capacity, 32 Zone, 4 alarm circuits, 3 Amp PSU, Printer, Metal 8281-0106
2 Loop, 500mA capacity, 32 Zone, 4 alarm circuits, 3 Amp PSU, Metal * 8281-0205
2 Loop, 500mA capacity, 32 Zone, 4 alarm circuits, 3 Amp PSU, Printer, Metal 8281-0206

NEW LoopSense SmartTerminal Repeaters

SmartTerminal Repeater without PSU 4380-0011
SmartTerminal Repeater with 2 Amp PSU 4380-0012
SmartTerminal Slim Line Repeater without PSU 4380-0013

LoopSense SmartTerminal LoopSense SmartTerminal Flush Mount Surround for LoopSense Metal ENC 3004-A
Repeater Slim Line Repeater 2nd Loop Activation Key 8210-0001

* Approvals: EN54-2 & 4/LPCB

SEA/PAGE 10 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS LOOPSENSE Intelligent

Relay Board

• Provides volt free change over contacts

• 8 relay outputs per board Voltage 24 VDC
Quiescent current 2.4 mA
• Max 1 per LoopSense system
Max current 80 mA
• Remote version available – DIN Mount chassis Relay contact rating 3 amp at 24 VDC
• Remote version communication via RS485 serial link Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 130 grams

Relay Board 4310-0050

Relay Board (Remote) 4310-0055

Sounder Board

• Provides 8 monitored switched 24 VDC outputs per board

• Max 1 per LoopSense Voltage 24 VDC
Quiescent current 5.6 mA
Max current 26 mA
Output rating (ea) 500 mA at 24 VDC
Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 100 grams

Sounder Board 4310-0060

SEA/PAGE 11 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS LOOPSENSE Intelligent

8 Zone Conventional Board

• Supports up to eight conventional zones

• Selectable end of line device 3K3, 4K7, 6K8, 10K or 10µF capacitor Voltage 24 VDC
Quiescent current 15mA (including capacitive EOL
• Supports head removal requirement on each zone
current) plus device current
• Supports up to 40 conventional devices per zone circuit Alarm current 43mA (one circuit in alarm)
(Apollo Series 65 or Orbis) Operating temperature -5°C to +55°C (no icing)
• Programmable latching and non-latching (self-resetting) input on Relative humidity 0 to 95% (non condensing)
each zone circuit Size 72.5 x 155mm
• Fully compatible with other Ampac LoopSense Add-Ons Weight 120 grams

8 Zone Conventional Board 4310-0082

SEA/PAGE 12 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS

FireFinder
Conventional / Intelligent
Fire Alarm Control Panel
FireFinder is a state of the art multi microprocessor controlled Intelligent Fire Alarm
Control Panel. Modular in design, the FireFinder provides flexibility and versatility
that can be configured to operate with both intelligent analogue addressable and
conventional devices in the one system.

Available in single loop or multiple loop configurations, the FireFinder supports the
leading Apollo XP95 and Discovery detector protocols. The Ampac ConfigManager
software tools provide a powerful combination with the FireFinder to configure
the system operational and functional characteristics of an installation. Enhanced
networking capabilities offer the user extended applications with FireFinder
incorporating a Master/ Slave Fire control panel arrangement, true Peer to Peer systems,
data gathering panels and SmartGraphics a PC based application for the supervision,
monitoring and control of larger fire management systems.

• Clear back-lit 40 character 8 line LCD display

• Programming options via the front panel or laptop computer
• Remote system interrogation and diagnostics
• Extensive Alarm Management resources
• Self Auto Learn capabilities
• Day Night sensitivity settings
• Versatile multi processor architecture
• Event log and printer options
• SPOT – Single Person Operation Test
• Flexible modular expansion and panel Add Ons
• SmartTerminal repeater options

SEA/PAGE 13 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

Electrical
Mains Supply Voltage 85-264 VAC
Output Voltage 27 VDC
Power Supply Current 5.6 Amps
Quiescent Current (1 Loop 32 Zone LEDs) 280-330 mA

Outputs
Sounder 1-1 – Programmable Monitored 2 Amps
Sounder 1-2 – Programmable Monitored 2 Amps
Sounder 2 – Programmable Monitored 1 Amp
F.A.R.E. Fire Alarm Routing Equipment – Monitored 1 Amp
F.W.R.E. Fault Warning Routing Equipment – Monitored 1 Amp
F.A.R.E. Fire Alarm Routing Equipment – Relay Output Voltage Free 1 Amp @ 30v
F.W.R.E. Fault Warning Routing Equipment – Relay Output Voltage Free 1 Amp @ 30v
Disable Relay VFCO 1 Amp @ 30v
FireFinder CP10-1/SP1X FireFinder CP10-4/SP8X Alarm Relay VFCO 1 Amp @ 30v
Conventional / Intelligent Control Panel Conventional / Intelligent Control Panel Valve Monitor Relay VFCO 1 Amp @ 30v
with glazed outer door with glazed outer door
Battery Fail Relay VFCO 1 Amp @ 30v

Environmental
Operating temperature -5°C to +55°C (no icing)
Relative humidity 25% to 75% (non condensing)
IP rating IP30

Mechanical
Materials 1.2mm steel
Construction Modular
Case Finish Red Ripple
Dimensions CP10-1/SP1X 500H x 400W x 140D mm
CP10-4/SP8X 840H x 515W x 140D mm

SEA/PAGE 14 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

SINGAPORE

FireFinder CP10-1 Conventional Control Panel

16 zone 8565-0100

FireFinder CP10-4 Conventional Control Panel
16 zone 8565-0200

FireFinder CP10-1 Intelligent Control Panel

1 loop 8565-1100

FireFinder CP10-4 Intelligent Control Panel

1 loop 8565-4100

Approvals: Singapore Code of Practice CP10:2005

FireFinder CP10-1/SP1X FireFinder CP10-4/SP8X
Conventional / Intelligent Control Panel Conventional / Intelligent Control Panel
with glazed outer door with glazed outer door MALAYSIA

FireFinder SP1X Conventional Control Panel

16 zone 8560-0100

FireFinder SP8X Conventional Control Panel
16 zone 8560-0200

FireFinder SP1X Intelligent Control Panel

1 loop 8560-1100

FireFinder SP8X Intelligent Control Panel

3 loop 8560-4300

Approvals: MS1404: Part 4: 1996

SEA/PAGE 15 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

Dot Matrix Panel Printer

• The dot matrix printer provides hardcopy activity report

• Alarms, faults, isolates and system logs may be printed Voltage 5 VDC
Quiescent current 1A @ 5 VDC
• 3 colour status LED
Character size 5 x 7 dots
• Self test mode Operating temperature -5°C to +55°C (no icing)
• Easy maintenance for replaceable ribbon cassette and paper roll Relative humidity 25 to 95% (non condensing)
• Print loop statistics Weight 380 grams

Dot Matrix Panel Printer 159-0111

Paper – 10 rolls MIS1981
Ribbon MIS1982

SmartTerminal Repeater

The SmartTerminal Repeater is an LCD annunciator designed to remotely

display the status and provide control of the FireFinder Fire Alarm Control Voltage 24 VDC
Quiescent current (backlight/buzzer off ) 12.4 mA
Panel.
Max current (backlight/buzzer on) 44 mA
Max distance from main panel 1.2 km
• 4 line 40 character backlit LCD display Auxiliary output (monitored) 27 VDC 500 mA
• 2 wire RS485 communication to the FireFinder Operating temperature -5°C to +55°C (no icing)
• Reset, Activate or Silence alarms Relative humidity 25 to 95% (non condensing)
• Programmable to display Alarms and/or Faults and Isolates Size SmartTerminal Repeater 300H x 360W x 100Dmm
• Flush or surface mounting SmartTerminal Slimline Repeater 195H x 324W x 52Dmm
• Slimline version available Weight SmartTerminal Repeater 2.5 kg
SmartTerminal Slimline Repeater 1 kg

SmartTerminal Repeater without PSU 4380-0001

SmartTerminal Repeater with 2 Amp PSU 4380-0002
SmartTerminal Slimline Repeater without PSU 4380-0003

SEA/PAGE 16 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

Network Interface Card (NIC)

• The NIC gives the FireFinder network capabilities via the RS422
communications port Voltage 24 VDC
Quiescent Current 65 mA
• Provides an additional RS232 communications port when connected
Available Ports RS422 – network
to Controller Interface Card (CIC) RS232 – serial comms
• High level interface for Building Management or ModBus protocol for Max distance (between NICs) 1.2km
SmartGraphics and PLCs Cable requirements RS422 – 2 pair twisted/screened
• The NIC can be isolated from other network devices RS232 – 1 pair twisted/screened
• Loop In/Loop Out for easy installation Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 225 grams

Network Interface Card – NIC (4 wire) 159-0053

Controller Interface Card (CIC)

• The CIC gives the FireFinder additional RS232 and RS485 capabilities
• Acts as a Controller board interface when used with a NIC Voltage 24 VDC
Quiescent Current 5 mA
• The RS232 communications port provides for Building Management,
Available Ports RS232 – serial communications
ModBus or serial printer RS485 – half duplex multi drop
• The RS485 communications port provides for Building Management, Max distance RS232 – 15m
ModBus or LED repeaters RS485 - 1.2km
Cable requirements RS232 – 1 pair twisted/screened
RS485 – 1 pair twisted/screened
Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 125 grams

Controller Interface Card (CIC) 159-0054

SEA/PAGE 17 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

Analogue Loop Upgrade Kit

• This kit adds an intelligent analogue loop to the FireFinder

Control Panel Voltage 24 VDC
Quiescent current 40 mA
• For an odd numbered loop upgrade the kit consists of an I/O CPU
Loop current 250 mA max.
module, cable and termination card Operating temperature -5°C to +55°C (no icing)
• An even numbered loop upgrade consists of an I/O CPU module Relative humidity 0 to 95% (non condensing)
and cable Weight 200 grams

1 Loop Upgrade Kit – even numbered loop 159-0001

1 Loop Upgrade Kit and processor – odd numbered loop 159-0003

Loop Module Expansion Kit

• Expands the capacity of the FireFinder to accommodate a further four

loops, 64 conventional zones, four I/O modules or any combination of Voltage 24 VDC
Quiescent current 5 mA
the above
Operating temperature -5°C to +55°C (no icing)
• Requires a main controller board Relative humidity 0 to 95% (non condensing)
Weight 110 grams

Loop Module Expansion Kit 159-0045

SEA/PAGE 18 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

8 Way Serial Relay Output Board

• Each serial relay output board offers 8 voltage free relay outputs, each
rated at 5 amps, 24 VDC Voltage 24 VDC
Quiescent current 5 mA
• Each relay has a single normally open/close volt-free contact extended
Relay output current 5 Amps at 24 VDC
to a wire-protected screw terminal Operating temperature -5°C to +55°C (no icing)
• The serial 8-way relay is driven directly from the main controller board Relative humidity 0 to 95% (non condensing)
Weight 190 grams

8 Way Serial Relay Output Board 159-0072

4 Plus 4 Bell Monitor Board

• The 4 Plus 4 Bell Monitor has screw terminals for 4 voltage free contacts
and 4 switched 24V DC sounder outputs Voltage 24 VDC
Quiescent current 20 mA
• The outputs are programmable and monitored for open or short circuit
Relay output current 1 Amp at 24 VDC
• The board connects directly to the main controller board Sounder output current 1 Amp each
Capacity 8 boards per main controller
Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 250 grams

4 Plus 4 Bell Monitor Board 159-0069

SEA/PAGE 19 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

8 Way Bell Monitor Board

• The 8-Way Bell Monitor has 8 switched 24V DC sounder outputs

• The outputs are programmable and monitored for open or short circuit Voltage 24 VDC
Quiescent current 20 mA
• The board connects directly to the main controller board
Max sounder output current 1 Amp each
Max output current 4 Amps per board
Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 250 grams

8 Way Bell Monitor Board 159-0071

16 Way Conventional Zone Card

• Adds 16 conventional Alarm Zone Circuits

• Kit consists of an I/O CPU module, cable and 16 zone termination card Voltage 24 VDC
Quiescent current 145 mA
• Supports up to 40 conventional detectors (Series 65 or Orbis) per zone
Operating temperature -5°C to +55°C (no icing)
• Fixed 3K3 End-Of-Line device Relative humidity 0 to 95% (non condensing)
Weight 185 grams

16 Way Conventional Zone Card 159-0005

SEA/PAGE 20 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

Panel Mounted LED Indicators

• Provide flexibility to include additional LED indicators to the FireFinder

SP1X and SP8X Voltage 27 VDC
Quiescent current 30 mA
• Available in three versions:
Max current 40 mA
– 32 zone alarm only indication (red) Operating temperature -5°C to +55°C (no icing)
– 16 zone alarm/fault indication (red/amber) Relative humidity 0 to 95% (non condensing)
– 32 zone general indication (amber) Weight 100 grams
• Serial connection to the FireFinder panel
• Simple clip installation
• Indicators remain illuminated until reset by the panel FireFinder SP1X 32 Zone Alarm Only Indication (Red) 159-0106
• Indicators are tested by the FireFinder panel’s lamp test control FireFinder SP8X 32 Zone Alarm Only Indication (Red) 159-0089

FireFinder SP1X 16 Zone Alarm/Fault Indication (Red/Amber) 159-0107

FireFinder SP8X 16 Zone Alarm/Fault Indication (Red/Amber) 159-0108

FireFinder SP1X 32 Zone General Indication (Amber) 159-0123

FireFinder SP8X 32 Zone General Indication (Amber) 159-0124

SEA/PAGE 21 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTROL PANELS FIREFINDER Conventional / Intelligent

Remote Mounted LED Indicators

• The remote LED indicator boards provide facilities to mimic the

FireFinder zonal LEDs and switches Voltage 27 VDC
Quiescent current 8 mA max
• Connects to the RS485 communications bus via the controller interface
Max current 100 mA
card Communication mode RS485
• Allows the custom design of geographic site layout mimics Baud rate 19200 max
• Each termination board connects up to 32 zone LEDs – 31 boards Communication cable 1 x pair twisted and screened
maximum – total 992 zone indications No. of boards 31 max
No. of zones 992 zones max
FireFinder LED Mimic Driver Buzzer external max current 20 mA
On board status indication Power on – green
Normal – green
Fault – yellow
Common inputs Reset
Lamp test
Buzzer mute
Bell isolate
Manual evacuate
Operating temperature -5°C to +55°C (no icing)
Relative humidity 0 to 95% (non condensing)

FireFinder LED Mimic Driver 302-7150

Mimic Output Termination Board
Mimic Output Termination Board BRD85MOTB1-A
Remote Expansion LED Board 302-7330

Remote Expansion LED Board

SEA/PAGE 22 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS

Orbis
Conventional Detectors
Orbis is a range of conventional detectors which has been developed with sophisticated
technology previously only found in intelligent detectors. Orbis is a range with modern
styling and incorporates a mounting base wihich saves installation time.

• Automatic drift compensation with DirtAlert® warning

• Patented FasTest® which reduces the time taken to test detectors
• SensAlert® uses a flashing LED to indicate that the sensor is not operating correctly
• StartUpTM for fast commissioning
• Attractive and compact design
• Electrically compatible with Series 60 and Series 65
• Wide voltage and operating temperature ranges
• Algorithms for transient rejection
• Flashing LED option
• 360° visibility of LEDs
• Insect resistant

SEA/PAGE 23 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS ORBIS Conventional

Orbis Optical Smoke Detector

The Orbis Optical Smoke Detector works using the well established light
scatter principle, however, the sensing technology is radically different Operating voltage 8.5 to 33 VDC
Quiescent current 65μA at 24 VDC
in design from previous optical detectors and significantly reduces false
Alarm current 40mA at 24 VDC
alarms. Remote output 1.2kΩ to -ve supply
Size 97Dia x 31H mm
• Responds well to slow-burning, smouldering fires Operating temperature -40°C to +70°C (no icing)
• Performs well in black and white smoke Relative humidity 0 to 98% (non condensing)
• Extra confirmation of smoke before alarm signal is given IP rating IP23D (EN60529)
• Reduced incidence of false alarms Weight 75 grams
• Sensing chamber keeps out dust and other airborne contaminants
• Operates over a broad range of voltages at extremes of temperature Orbis Optical Smoke Detector ORB-OP-12001-AMP

Approvals: EN54-7/LPCB

Orbis Multisensor Detector

The Orbis Multisensor Detector benefits from the same false alarm
reduction technology as the optical detector. It is a thermally enhanced Operating voltage 8.5 to 33 VDC
Quiescent current 65μA at 24 VDC
smoke detector and so will not give an alarm from heat alone.
Alarm current 40mA at 24 VDC
Remote output 1.2kΩ to -ve supply
• Responds well to fast-burning, flaming fires Size 97Dia x 42H mm
• Reduced incidence of false alarms Operating temperature -40°C to +70°C (no icing)
• Increased reliability of detection Relative humidity 0 to 98% (non condensing)
• Sensing chamber keeps out dust and other airborne contaminants IP rating IP23D (EN60529)
• Operates over a broad range of voltages at extremes of temperature Weight 80 grams

Approvals: EN54-7/LPCB Orbis Multisensor Detector ORB-OH-13001-AMP

SEA/PAGE 24 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS ORBIS Conventional

Orbis Heat Detector

The Orbis Heat Detector monitors temperature by using a single

thermistor network which provides a voltage output proportional to the Operating voltage 8.5 to 33 VDC
Quiescent current 65μA at 24 VDC
external air temperature. There are seven classes of heat detectors in the
Alarm current 40mA at 24 VDC
Orbis range designed to suit a wide variety of operating conditions. Remote output 1.2kΩ to -ve supply
Size 97Dia x 36H mm
• Can be used for applications where smoke detectors are unsuitable Operating temperature -40°C to +70°C (no icing)
• Ideal in environments that are dirty or smokey under normal conditions Relative humidity 0 to 98% (non condensing)
• Reduced incidence of false alarms IP rating IP23D (EN60529)
• Increased reliability of detection Weight 70 grams

Approvals: EN54-5/LPCB Orbis Heat Detector

A1R Standard 50°C MAT Rate-of-Rise ORB-HT-11001-AMP
A1S Standard 50°C MAT Static ORB-HT-11166-AMP
A2S Standard 50°C MAT Static ORB-HT-11002-AMP
BR Standard 65°C MAT Rate-of-Rise ORB-HT-11003-AMP
BS Standard 65°C MAT Static ORB-HT-11004-AMP
CR Standard 80°C MAT Rate-of-Rise ORB-HT-11005-AMP
CS Standard 80°C MAT Static ORB-HT-11006-AMP
MAT Maximum Application Temperature

TimeSaver Base

The TimeSaver Base is a completely new design that provides installers

with an open working area with fixing holes shaped to allow a simple Size 100Dia x 8H mm
IP rating IP23D (EN60529)
mounting procedure.
Weight 60 grams

• Grouped terminals to make wiring easy

TimeSaver Base ORB-MB-00012-AMP
• Two fixing centres
• LED alignment mark
• Cable stripping guide
• Detector locking mechanism

Approvals: EN54/LPCB

SEA/PAGE 25 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS ORBIS Conventional

TimeSaver Diode Base

The TimeSaver Diode Base has the same design as the standard TimeSaver
Base with the addition of a diode. It is used in systems which house active Size 100Dia x 8H mm
IP rating IP23D (EN60529)
EOL monitoring for head removal.
Weight 60 grams

• Grouped terminals to make wiring easy

TimeSaver Diode Base ORB-DB-00003-AMP
• Two fixing centres
• LED alignment mark
• Cable stripping guide
• Continuity link for voltage testing of zone wiring prior to commissioning
• Detector locking mechanism
• Other devices continue to work during unauthorised removal of
detectors

Approvals: EN54/LPCB

TimeSaver Relay Base

The TimeSaver Relay Base incorporates a single pole voltage-free change-

over contact for switching external equipment. When the detector changes Size 100Dia x 8H mm
Operating temperature -40°C to +70°C
to the alarm state, the relay is energised, causing the contact to change
Humidity 0 to 98%
state. The contact will remain in this condition until the detector is reset. IP rating IP23D (EN60529)
Weight 60 grams
• Grouped terminals to make wiring easy
• Two fixing centres TimeSaver Relay Base ORB-RB-10004-AMP
• LED alignment mark
• Cable stripping guide
• Continuity link for voltage testing of zone wiring prior to commissioning
• Detector locking mechanism
• Capable of switching up to 30V at 1A

Approvals: EN54/LPCB

SEA/PAGE 26 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS

DS Series
Intelligent Detectors
The DS Series of intelligent fire detectors is advanced in design, improved in performance
and has unique features that benefit the installer and end user. The range features
standard, isolator and relay bases.The DS Series has a ‘central intelligence’ system
where all the decisions are made by the control panel.

Features

• DIL Switch Addressing

• Alarm Flag for fast alarm reporting
• Alarm Address for fast location of alarm
• Electronics-free base
• Easy installation
• Elegant design
• Insect Resistant

SEA/PAGE 27 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS DS Series

DS Optical Smoke Detector

The DS Series Photo Detector continuously monitors the

Operating voltage 17-28 VDC
environment for contamination of clean air by smoke particles. This Quiescent current 340μA at 24 VDC
facilitates early warning of incipient fires. Alarm current 2.5mA at 24 VDC
Remote output N/A
• Detects a wide range of fires Size 100Dia x 50H mm
• Insensitive to wind Operating temperature -20°C to +60°C (no icing)
• Transient voltage protection Relative humidity 0 to 95% (non condensing)
• Fine gauze insect protection IP rating IP43
• Simple construction allows detection chamber to be cleaned Weight 157 grams
• Lockable security fitting
• White Finish
• DIL switch address setting

Approvals: EN54/LPCB
DS Optical Smoke Detector 55000-665AMP

DS Heat Detector
The DS Series Heat Detector monitors temperature by using a single
thermistor network that provides a voltage output proportional to Operating voltage 17-28 VDC
Quiescent current 300μA at 24 VDC
the external air temperature.
Alarm current 2.5mA at 24 VDC
Remote output N/A
• Rate of rise and fixed temperature alarm point Size 100Dia x 50H mm
• Single thermistor technology Operating temperature -20°C to +70°C (no icing)
• Transient voltage protection Relative humidity 0 to 95% (non condensing)
• Resettable operation IP rating IP53
• Lockable security finish Weight 157 grams
• White finish
• DIL switch address setting
DS Heat Detector Standard (55°C) 55000-465AMP
DS Heat Detector High Temperature (90°C) 55000-475AMP

Approvals: EN54/LPCB

SEA/PAGE 28 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS DS Series

Standard Base

All detectors in the DS Series fit the Standard Base. It is a low

insertion force base with stainless steel contacts for the Size 100Dia x 8H mm
Operating temperature -20°C to +60°C (no icing)
detector terminals.
Relative humidity 0 to 95% (non condensing)
Weight 55 grams
• One way fit of detector
• Locking feature to prevent unauthorised removal

Approvals: EN54-5, 7 & 8/LPCB

Standard Base 45681-200AMP

Deep Base

The DeepBase is a mounting base for the DS Series Products which has an
increased depth to allow for cables to be inserted into the side. Size 100Dia x 17H mm
Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
• One way fit of detector Weight 55 grams
• Locking feature to prevent unauthorised removal

Approvals: EN54-5, 7 & 8/LPCB

DS Deep Base 45681-213AMP

SEA/PAGE 29 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS DS Series

Relay Base

The Low Power Relay Base incorporates a low power relay to control field
equipment such as automatic door closers. Voltage 17-28 VDC
Quiescent current 5mA at 24 VDC
• Gives a set of voltage free contacts controlled by the remote Size 100Dia x 17H mm
output of a detector Operating temperature -20°C to +70°C (no icing)
• Draws negligible current Relative humidity 0 to 95% (non condensing)
• Capable of switching up to 30V at 1A Weight 100 grams

DS Relay Base 45681-504AMP

Isolating Base

The new style Isolating Base senses and detects short-circuit faults on
the Addressabe Detection loops and spurs.
Voltage 17-28 VDC
Quiescent current 47μA (non isolating)
• Up to 20 devices may be installed between isolating bases 4mA (isolating)
• High brightness LED Size 100Dia x 17H mm
Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 100 grams

DS Isolating Base 45681-505AMP

SEA/PAGE 30 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS

XP95
Intelligent Detectors
The XP95 range of intelligent fire detectors is advanced in design, improved in performance
and has unique features that benefit the installer and end user. The range features smoke
detectors (ionisation and optical), standard and high temperature heat detectors and a
multisensor. Beam detectors, flame detectors, manual call points, audio visual signalling
devices, interface units and isolators complete the range. XP95 has a ‘central intelligence’
system where all the decisions are made by the control panel.

Features

• Alarm Flag for fast alarm reporting

• Alarm Address for fast location of alarm
• XPERT card addressing
• Electronics-free base
• Easy installation
• Elegant design
• Insect Resistant

SEA/PAGE 31 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO XP95 Intelligent

XP95 Ionisation Smoke Detector

The XP95 Ionisation Smoke Detector uses a low activity radioactive foil
to detect fires by irradiating the air in the smoke chambers and causing Voltage 17-28 VDC
Quiescent current 280μA at 24 VDC
a current flow. If smoke enters the chamber, the current flow is reduced
Alarm current 2.0mA at 24 VDC
leading to an alarm. Size inc base 100Dia x 50H mm
Operating temperature -20°C to +60°C (no icing)
• Responds well to fast-burning, flaming fires Relative humidity 0 to 95% (non condensing)
• Designed to operate in a variety of environments IP rating IP23D
• Minimal effects from temperature, humidity, atmospheric pressure Weight inc base 161 grams
• Well protected against electromagnetic interference over a wide
frequency range XP95 Ionisation Smoke Detector 55000-520-AMP

Approvals: EN54-7/LPCB

XP95 Optical Smoke Detector

The XP95 Optical Smoke Detector works using the light scatter principle
and is ideal for applications where slow-burning or smouldering fires are Voltage 17-28 VDC
Quiescent current 340μA at 24 VDC
likely.
Alarm current 4mA at 24 VDC
Size inc base 100Dia x 50H mm
• Responds well to slow-burning, smouldering fires Operating temperature -20°C to +60°C (no icing)
• Well suited for bedrooms and escape routes Relative humidity 0 to 95% (non condensing)
• Unaffected by wind or atmospheric pressure IP rating IP23D
Weight inc base 157 grams
Approvals: EN54-7/LPCB Sensitivity 0.12db/m

XP95 Optical Smoke Detector 55000-620-AMP

SEA/PAGE 32 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO XP95 Intelligent

XP95 Heat Detector

The XP95 Heat Detector monitors temperature by using a single

thermistor network which provides a count output proportional to the Voltage 17-28 VDC
Quiescent current 250-270μA at 24 VDC
external air temperature. The XP95 range features two Heat Detectors,
Alarm current 2mA at 24 VDC
standard and high emperature. The standard heat detector is classified Size inc base 100Dia x 50H mm
as an A2S device and will report an alarm at 55°C. The high temperature Operating temperature A2S: -20°C to +70°C (no icing)
detector, classified as a CS device, will report an alarm at 90°C. CS: -20°C to +120°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Ideal in environments that are dirty or smoky under normal conditions IP rating IP53
• Well suited for warehouses, loading bays and car parks Weight inc base 157 grams
• Unaffected by wind or atmospheric pressure
XP95 Heat Detector Standard – A2S 55000-420-AMP
Approvals: EN54-5/LPCB XP95 Heat Detector High Temperature – CS 55000-401-AMP

XP95 Multisensor Detector

The XP95 Multisensor Detector contains an optical smoke sensor and a

thermistor temperature sensor whose outputs are combined to give the Voltage 17-28 VDC
Quiescent current 500μA at 24 VDC
final analogue value.
Alarm current 3.5mA at 24 VDC
Size inc base 100Dia x 58H mm
• Sensitive to a wide range of fires Operating temperature -20°C to +60°C (no icing)
• Well suited for environments such as hotel bedrooms Relative humidity 0 to 95% (non condensing)
• Unaffected by wind or atmospheric pressure IP rating IP53
Weight inc base 160 grams

XP95 Multisensor Detector 55000-885-AMP

SEA/PAGE 33 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO XP95 Intelligent

XP95 Intelligent Detector Base

All detectors in the XP95 range fit the Intelligent Detector Base. It is a low
insertion force base with stainless steel contacts for the detector terminals. Size 100Dia x 8H mm
Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
• XPERT addressing Weight 55 grams
• One way fit of detector
• Locking feature to prevent unauthorised removal XP95 Intelligent Detector Base 45681-210-AMP

Approvals: EN54-5, 7 & 8/LPCB

XP95 Isolating Base

The new style Isolating Base senses and detects short-circuit faults on
XP95 loops and spurs. Voltage 17-28 VDC
Quiescent current 47μA (non isolating)
4mA (isolating)
• Up to 20 devices may be installed between isolating bases Size 100Dia x 24H mm
• High brightness LED Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 100 grams

XP95 Isolating Base 45681-284-AMP

XP95 Intelligent Low Power Relay Base

The Low Power Relay Base incorporates a low power relay to control field
equipment such as automatic door closers. Voltage 17-28 VDC
Quiescent current 5mA at 24 VDC
Size 100Dia x 24H mm
• Gives a set of voltage free contacts controlled by the remote Operating temperature -20°C to +70°C (no icing)
output of a detector Relative humidity 0 to 95% (non condensing)
• Draws negligible current Weight 100 grams
• Capable of switching up to 30V at 1A
XP95 Intelligent Low Power Relay Base 45681-242-AMP

SEA/PAGE 34 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO XP95 Intelligent

Blank XPERT Card Pre-addressed XPERT Card

A universal address card supplied with all bases. Using a coding guide, pips Pre-addressed XPERT cards are supplied with pips already removed.
are removed to set the address of the inserted detector.
z Saves time and increases accuracy during commissioning
• Simplifies and speeds up installation and commissioning z Pre-numbered 1-126
• Uses patented, proven technology
• Address remains the same, no matter how often detectors are replaced Blank XPERT Card 38531-771-AMP
• Flexibility to create any address Pre-addressed XPERT Card 1-126 45682-127-AMP

XP95 Manual Call Point

The XP95 Manual Call Point is compliant with EN54-11. The address of each
call point is set at the commissioning stage by means of a seven segment Voltage 17-28 VDC
Quiescent current 100μA at 24VDC
DIL switch. The device features plug and play terminal connections and a
Alarm current 4mA
resettable element. Address method 7 segment DIL switch
Size (surface mount) 93H x 89W x 59.5D mm
• Plug-and-play terminal connectors for fast wiring Operating temperature -20°C to +60°C (no icing)
• Allows wiring continuity testing before fitting Relative humidity 0-95% (non condensing)
• Isolated version available IP rating IP45
• Reports an alarm in under 0.2 seconds Weight 190 grams
• Resettable element
XP95 Manual Call Point (Surface) 55100-905-AMP
Approvals: EN54-11/LPCB XP95 Manual Call Point with Isolator (Surface) 55100-908-AMP
EN54-17/LPCB (Isolated Version)

SEA/PAGE 35 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO XP95 Intelligent

Intelligent Waterproof Manual Call Point

The Intelligent Waterproof Manual Call Point has been designed for use
outdoors and in places where moisture can occur. Voltage 17-28 VDC
Quiescent current 230μA
Alarm current 2mA
• Plug and play terminal connections for fast wiring Address method 7 segment DIL switch
• Allow wiring continuity testing before fitting Size (surface mount) 87H x 87W x 54D mm
• Isolated version available Operating temperature -20°C to +70°C (no icing)
• Resettable element Relative humidity 0-95% (non condensing)
IP rating IP67
Approvals: EN54-11/LPCB Weight 400 grams
EN54-17/LPCB (Isolated Version)
Intelligent Waterproof Manual Call Point 58100-950-AMP
Intelligent Waterproof Manual Call Point with Isolator 58100-951-AMP

XP95 Intelligent Reflective Beam Detector

The XP95 Reflective Beam Detector differs from a traditional beam

detector in that it is a single unit which houses a transmitter, a receiver and Input voltage 17-28 VDC
Quiescent current 5μA @ 24 VDC
the control electronics. The beam detector is available in two versions: a
Alarm current 9mA at 24 VDC
single reflector model for distances of 5-50m and a four-reflector unit for Dimensions 210H x 150W x 120D mm
distances of 50-100m. Operating temperature -20°C to +55 °C (no icing)
Relative humidity 0-95% (non condensing)
• Loop-powered, requires no external supply IP rating IP50
• Compatible with Discovery and XP95 protocols Weight 670 grams
• Incorporates a short-circuit isolator Min beam distance 5 metres
• Automatic drift compensation Max beam distance 100 metres
• Automatic reset following alarm or fault condition
Reflective Beam Detector 5-50m 55000-268-AMP
Reflective Beam Detector 50-100m 55000-273-AMP
Beam Detector Reflector 100mm x 100mm 29600-201-AMP
Termination Back Box 29600-241-AMP

SEA/PAGE 36 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS

Discovery
Intelligent Detectors
Discovery is a range of high-specification, intelligent fire detectors developed to meet
the requirements of sophisticated systems while providing engineers with an additional
dimension in fire protection capability. Discovery has a ‘distributed intelligence system’
where decisions are made in the detector head as well as at the control panel. Drift
compensation is also incorporated into the detector, allowing it to adapt to dirty or dusty
environments reducing false alarms.

• Rejection of transient signals

• Flashing LED option
• Five response modes for ease of optimisation to changing environments
• Drift compensation to ensure constant sensitivity
• Four bytes of non-volatile memory for user data
• Alarm flag for fast alarm reporting
• Conventional alarm facility during control panel processor fault
• 360° visibility in alarm
• Compatible with XP95 systems
• Insect resistant

SEA/PAGE 37 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Ionisation Smoke Detector

The Discovery Ionisation Smoke Detector uses a low activity radioactive

foil to irradiate the air in the smoke chamber causing a current flow. If Voltage 17-28 VDC
Quiescent current 500μA at 24 VDC
smoke enters the chamber, the current flow is reduced leading to an
Alarm current 3.5mA at 24 VDC
alarm. Size inc base 100Dia x 50H mm
Operating temperature -20°C to +60°C (no icing)
• Responds well to fast-burning, flaming fires Relative humidity 0 to 95% (non condensing)
• Designed to operate in a variety of environments IP rating IP43
• Remote test feature Weight inc base 160 grams

Approvals: EN54-7/LPCB Discovery Ionisation Smoke Detector 58000-500-AMP

Discovery Optical Smoke Detector

The Discovery Optical Smoke Detector works using the light scatter
principle and is ideal for applications where slow-burning or smouldering Voltage 17-28 VDC
Quiescent current 400μA at 24 VDC
fires are likely.
Alarm current 3.5mA at 24 VDC
Size inc base 100Dia x 50H mm
• Responds well to slow-burning, smouldering fires Operating temperature -20°C to +60°C (no icing)
• Well suited for bedrooms and escape routes Relative humidity 0 to 95% (non condensing)
• Unaffected by wind or atmospheric pressure IP rating IP43
• Remote test feature Weight inc base 160 grams

Approvals: EN54-7/LPCB
Discovery Optical Smoke Detector 58000-600-AMP

SEA/PAGE 38 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Heat Detector

The Discovery Heat Detector, distinguishable by the low airflow resistant

case, uses a single thermistor to sense the air temperature around the Voltage 17-28 VDC
Quiescent current 500μA at 24 VDC
detector.
Alarm current 3.4mA at 24 VDC
Size inc base 100Dia x 50H mm
• Ideal in environments that are dirty or smokey under normal conditions Operating temperature 0°C to +80°C (no icing)
• Well suited for warehouses, loading bays and car parks Relative humidity 0 to 95% (non condensing)
• Unaffected by wind or atmospheric pressure IP rating IP53
• Remote test feature Weight inc base 160 grams

Approvals: EN54-5/LPCB Discovery Heat Detector 58000-400-AMP

Mode Class Application Static Response

(EN54-5:2000) Temperature °C Temperature °C
Heat
Typ Max Min Typ Max
Detector
1 A1R 25 50 54 57 65
Response
2 A2 25 50 54 61 70

3 A2S 25 50 54 61 70
Modes
4 CR 55 80 84 90 100

5 CS 55 80 84 90 100

For air temperatures in the range 15°C to 55°C, the analogue value for a detector in mode 1 will correspond approximately to the air temperature.

SEA/PAGE 39 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Multisensor Detector

The Discovery Multisensor Detector comprises optical smoke and

thermistor temperature sensors whose outputs are combined to give Voltage 17-28 VDC
Quiescent current 500μA at 24 VDC
the final analogue value. As a result, the multisensor is useful over a wide
Alarm current 3.5mA at 24 VDC
range of applications and is highly immune to false alarms. Size inc base 100Dia x 58H mm
Operating temperature -20°C to +60°C (no icing)
• Ideal for a wide range of applications Relative humidity 0 to 95% (non condensing)
• Highly immune to false alarms IP rating IP43
• Well suited for environments such as hotel bedrooms Weight inc base 160 grams
• Unaffected by wind or atmospheric pressure
• Well suited for sensitive environments Discovery Multisensor Detector 58000-700-AMP
• Heat only, optical only options
• Remote test feature

Approvals: EN54-5/LPCB
EN54-7/LPCB

Mode Smoke Sensitivity Temperature Sensitivity Response Type Minimum Time to

(grey smoke) (relative) Alarm (seconds)
Multisensor
% per m % per ft
Detector 1 1.1 0.35 High Multisensor 20
Operating 2 2.1 0.7 No response to heat Optical 30
3 2.8 0.9 Low Multisensor 20
Modes 4 4.2 1.4 High Multisensor 20
5 No response to smoke See text Heat A1 30

SEA/PAGE 40 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Carbon Monoxide Detector

The Discovery Carbon Monoxide (CO) Detector is good at detecting deep-

seated fires. Please note that CO detectors do not detect smoke particles Voltage 17-28 VDC
Quiescent current 500μA at 24 VDC
or heat and are not universal replacements for smoke detectors.
Alarm current 3.5mA at 24 VDC
Size inc base 100Dia x 50H mm
• Enhanced detection capability Operating temperature 0°C to +50°C (no icing)
• Early response to hot fires Relative humidity 15 to 95% (non condensing)
• Ideal for smouldering fires IP rating IP43
• Less susceptible to false alarms caused by steam than smoke alarms Weight inc base 160 grams
• Five response modes Cell life (max) 7 years

Discovery Carbon Monoxide Detector 58000-300-AMP

Mode Alarm Threshold Minimum Time to Alarm Typical Application

(ppm) (seconds)

1 30 60 Sleeping with no ambient CO

Relative
2 45 30 General use fast response such as supplementary
Performance of protection in atria
Detectors in 3 45 60 General use and sleeping risk with some low-level CO
(such as from light smoking or an unventilated gas fire)
Test Fires
4 60 30 General smoking area and supplementary detection of
deep seated fires such as laundry rooms
5 75 30 Supplementary use in kitchen or boiler room

SEA/PAGE 41 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Intelligent Detector Base

All detectors in the Discovery range fit the Intelligent Detector Base. It is
a low insertion force base with stainless steel contacts for the detector Size 100Dia x 8H mm
Operating temperature -20°C to +60°C (no icing)
terminals. XPERT cards are supplied with all bases.
Relative humidity 0 to 95% (non condensing)
Weight 55 grams
• XPERT addressing
• One way fit Discovery Intelligent Detector Base 45681-210-AMP
• Locking feature to prevent unauthorised removal

Approvals: EN54-5/LPCB
EN54-7/LPCB
EN54-8/LPCB

Discovery Isolating Base

The new style Isolating Base senses and detects short-circuit faults on
loops and spurs. Voltage 17-28 VDC
Quiescent current 47μA (non isolating)
4mA (isolating)
• Up to 20 devices may be installed between isolating bases Size 100Dia x 24H mm
• High brightness LED Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
Weight 100 grams

Discovery Isolating Base 45681-284-AMP

SEA/PAGE 42 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Intelligent Low Power Relay Base

The Intelligent Low Power Relay Base incorporates a low power relay to Voltage 17-28 VDC
control field equipment such as automatic door closers. Quiescent current 5mA at 24 VDC
Size 100Dia x 24H mm
• Gives a set of voltage free contacts controlled by the remote Operating temperature -20°C to +70°C (no icing)
Relative humidity 0 to 95% (non condensing)
output of a detector
Weight 100 grams
• Draws negligible current
• Capable of switching up to 30V at 1A Discovery Intelligent Low Power Relay Base 45681-242-AMP

Blank XPERT Card Pre-addressed XPERT Card

A universal address card supplied with all bases. Using a coding guide, pips Pre-addressed XPERT cards are supplied with PIPs already removed.
are removed to set the address of the inserted detector.
z Saves time and increases accuracy during commissioning
• Simplifies and speeds up installation and commissioning z Pre-numbered 1-126
• Uses patented, proven technology
• Address remains the same, no matter how often detectors are replaced Blank XPERT Card 38531-771-AMP
• Flexibility to create any address Pre-addressed XPERT Card 1-126 45682-127-AMP

SEA/PAGE 43 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 DETECTORS APOLLO DISCOVERY Intelligent

Discovery Manual Call Point

The Discovery Manual Call Point is compliant with EN54-11. The address
of each call point is set at the commissioning stage by means of a Voltage 17-28 VDC
Quiescent current 100uA
seven segment DIL switch. The device features plug and play terminal
Alarm current 4mA
connections and a resettable element. Address method 7 segment DIL switch
Size (surface mount) 87H x 87W x 52D mm
• Plug-and-play terminal connectors for fast wiring Operating temperature -20°C to +60°C (no icing)
• Allows wiring continuity testing before fitting Humidity 0-95% (non condensing)
• Isolated version available IP rating IP53
• Reports an alarm in under 0.2 seconds Weight 190 grams
• Resettable element
Discovery Manual Call Point with Isolator (Surface) 58100-908-AMP
Approvals: EN54-11/LPCB Discovery Manual Call Point (Surface) 58100-910-AMP
EN54-17/LPCB (Isolated Version)

Discovery Waterproof Manual Call Point

The Discovery Waterproof Manual Call Point has been designed for use
outdoors and in places where moisture can occur. It can be used with the Voltage 17-28 VDC
Quiescent current 100uA
XP95 and Discovery ranges.
Alarm current 4mA
Address method 7 segment DIL switch
• Plug and play terminal connections for fast wiring Size (surface mount) 93H x 97.5W x 71D mm
• Allow wiring continuity testing before fitting Operating temperature -30°C to +70°C (no icing)
• Isolated version available Humidity 0-95% (non condesing)
• Resettable element IP rating IP67
Weight 240 grams
Approvals: EN54-11/LPCB
EN54-17/LPCB (Isolated Version) Discovery Waterproof Manual Call Point 58100-950-AMP
Discovery Waterproof Manual Call Point with Isolator 58100-951-AMP

SEA/PAGE 44 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES

XP95/Discovery
Intelligent Interfaces
Apollo manufactures a comprehensive range of interfaces for intelligent systems which
enable fire protection systems to be engineered simply and effectively without the
need for custom-designed equipment. There are a variety of interfaces available to suit
a number of individual applications.

Standard Interfaces with Isolators are fitted with bi-directional short-circuit isolators
so that they are unaffected by a single short circuit on either loop input or output.
However, the Input/Output Unit and Output Unit with isolator are exceptions to this.
The removal of loop power to these interfaces will cause a ‘set’ relay to ‘reset’.

DIN-Rail Interfaces feature enclosures that clip to standard 35mm DIN-Rails or are
screwed to the base of a larger enclosure. They enable fire system designers to
determine the functions required and create multi-purpose interfaces for individual
sites.

• Easy to install
• Well protected
• Modular design
• A neat solution

SEA/PAGE 45 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

Input/Output Unit with Isolator

The Input/Output unit with Isolator provides a voltage free, single, pole,
change-over relay output, a single, monitored switch input and an Voltage 17-28vdc
Quiescent current 1.2mA at 24vdc
unmonitored, non-polarised opto-coupled input.
Max current 3.5mA at 24vdc
Relay contact 1A at 30vdc
• It can report fault, switch open and switch closed levels Opto input 35vdc max
• Three visible LEDs Monitored input voltage 9-11vdc
• Loop powered Operating temperature -20°C to +70°C (no icing)
• Voltage free Relative humidity 0 to 95% (non condensing)
• Capable of switching up to 1A at 30V IP Rating IP54
• Built-in short circuit isolator Size 150W x 90H x 48D mm
Weight 240 grams
Approvals: EN54-18/LPCB
Input/Output Unit with Isolator 55000-847-AMP

Output Unit with Isolator

The Output Unit with Isolator provides two voltage free single pole,
change-over relay outputs. It is a simplified version of the Input/Output Voltage 17-28vdc
Quiescent current 1.2μA at 24vdc
unit without circuitry for monitoring inputs.
Max current 3mA at 24vdc
Relay contact 1A at 30vdc
• Capable of switching up to 1A at 30V Operating temperature -20°C to +70°C (no icing)
• Loop powered Relative humidity 0 to 95% (non condensing)
• Built-in short circuit isolator IP Rating IP54
Size 150W x 90H x 48D mm
Approvals: EN54-18/LPCB Weight 240 grams

Output Unit with Isolator 55000-849-AMP

SEA/PAGE 46 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

Switch Monitor with Isolator

The Switch Monitor with Isolator is designed to monitor the state of

one or more single pole, volt free contacts connected on a single pair of Voltage 17-28 dc
Quiescent current 1.25mA at 24vdc
cables and to report the status to Ampac compatible analogue control
Max current 3.6mA at 24vdc
equipment. Max switching current 3A at 30vdc
Monitored input voltage 9-11vdc
• Four input states – ’normal’, ’fault’, ’pre-alarm’ and ’alarm’ Operating temperature -20°C to +70°C (no icing)
• Two visible LEDs Relative humidity 0 to 95% (non condensing)
• Loop powered IP Rating IP54
• Built-in short circuit isolator Size 150W x 90H x 48D mm
Weight 240 grams
Approvals: EN54-18/LPCB
Switch Monitor with Isolator 55000-843-AMP

Switch Monitor Plus with Isolator

The Switch Monitor Plus with Isolator is designed to monitor the state of
one or more single pole, volt free contacts connected on a single pair of Voltage 17-28vdc
Quiescent current 1.25mA at 2 vdc
cables and to report the status to Ampac compatible analogue control
Max current 4.2mA at 24vdc
equipment. Additional circuitry is incorporated to monitor flow switches Max switching current 3A at 30vdc
and provide a time delay. It can also be used to reset a beam detector. Monitored input voltage 9-11vdc
Operating temperature -20°C to +70°C (no icing)
• Output for resetting a remote detector Relative humidity 0 to 95% (non condensing)
• Four input states – ’normal’, ’fault’, ’pre-alarm’ and ’alarm’ IP Rating IP54
• Two visible LEDs Size 150W x 90H x 48D mm
• Selectable alarm delay for monitoring flow switches – 30 seconds Weight 240 grams
• Built-in short circuit isolator
Switch Monitor Plus with Isolator 55000-841-AMP
Approvals: EN54-18/LPCB

SEA/PAGE 47 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

Zone Monitor with Isolator

The Zone Monitor with Isolator powers and controls the operation of a
zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery Voltage 17-28vdc
Quiescent current 4mA + detector load
or XP95 Loop.
Alarm current 11mA at 24vdc
EOL resistor value 5.1k ¹⁄₃ watt
• Loop powered Maximum capacitor on zone terminals 50µF
• Visible LED Zone voltage 19V ± 1V
• Built-in short circuit isolator Operating temperature -20°C to +70°C (no icing)
Relative humidity 0 to 95% (non condensing)
Approvals: EN54-18/LPCB IP Rating IP54
Size 150W x 90H x 48D mm
Weight 230 grams

Discovery/XP95 Zone Monitor with Isolator 55000-845-AMP

Sounder Control Unit with Isolator

The XP95 Sounder Control Unit with Isolator is used to control the
operation of a zone of conventional sounders and report their status to Voltage 17-28vdc
Quiescent current 1.95mA at 24vdc
the control panel.
Loop current max 4.5mA
External supply 9-32vdc 1.25A
• Allows sounders to be operated continuously or be pulsed or be External quiescent current 3mA at 32vdc
pulsed, 1 second on 1 second off External current max 47mA + load
• May be synchronized when in pulsed operation Sounder circuit load max 1A at 30vdc
Operating temperature -20°C to +70°C (no icing)
Approvals: EN54-18/LPCB Relative humidity 0 to 95% (non condensing)
IP Rating IP54
Size 150W x 90H x 48D mm
Weight 240 grams

Sounder Control Unit with Isolator 55000-852-AMP

SEA/PAGE 48 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

Three Channel Input/Output Unit with Isolator

The Three Channel Input/Output unit with Isolator provides three voltage
free, single pole, change-over relay outputs, and three monitored switch Voltage 17-28vdc
Quiescent current 3mA at 24vdc
inputs.
Max current 7.5mA at 24vdc
Relay contact 1A at 30vdc
• Supervises one or more normally-open switches on each of Monitored input voltage 9-11vdc
the three inputs Operating temperature -20°C to +70°C (no icing)
• Loop powered Relative humidity 0 to 95% (non condensing)
• Capable of switching up to 30V at 1A on each of the three outputs IP Rating IP54
• Built-in short circuit isolator Size 250W x 175H x 75D mm
Weight 621 grams
Approvals: EN54-18/LPCB
Three Channel Input/Output Unit with Isolator 55000-588-AMP

Mains Switching Input/Output Unit

The Mains Switching Input/Output Unit provides a voltage free, single

pole, change-over relay output, and three monitored switch input. Voltage 17-28vdc
Quiescent current 3.5mA at 24vdc
Rated load 5A at 240vac
• Supervises one or more normally-open switches connected to a single 2A at 48vdc
pair of cables Switching capacity max 1.25kva
• Three visible LEDs Switch input monitoring voltage 9-11vdc
• Capable of switching 250 vac at up to 5 amps Operating temperature -20°C to +70°C (no icing)
Relative humidity 0 to 95% (non condensing)
Approvals: EN54-18/LPCB IP Rating IP54
Size 150W x 90H x 48D mm
Weight 240 grams

Mains Switching Input/Output Unit 55000-875APO

SEA/PAGE 49 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

DIN-Rail Input/Output Unit

The DIN-Rail Input/Output Unit provides a voltage free, single pole,

change-over relay output, a single monitored switch input and an Voltage 17-28vdc
Quiescent current 1.2mA at 24vdc
unmonitored, non-polarised opto-coupled input.
Max current 4.5mA at 24vdc
Relay contact 1A at 30vdc
• It can report fault, switch open and switch closed levels Opto input 35vdc max
• Three visible LEDs Monitored input voltage 9-11vdc
• Loop powered Operating temperature -20°C to +70°C (no icing)
• Voltage free Relative humidity 0 to 95% (non condensing)
• Capable of switching up to 30V at 1A IP Rating IP20
Size 110H x 107W x 20Dmm
Weight 95 grams

DIN-Rail Input/Output Unit 55000-803-AMP

DIN-Rail Output Unit

The DIN-Rail Output Unit provides a voltage free single pole,

change-over relay output. It is a simplified version of the Input/Output Voltage 17-28vdc
Quiescent current 720µA at 24vdc
unit without circuitry for monitoring inputs.
Max current 3.3mA at 24vdc
Relay contact 1A at 30vdc
• Capable of switching up to 30V at 1A Operating temperature -20°C to +70°C (no icing)
Relative humidity 0 to 95% (non condensing)
IP Rating IP20
Size 110H x 107W x 20Dmm
Weight 95 grams

DIN-Rail Output Unit 55000-804-AMP

SEA/PAGE 50 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

DIN-Rail Switch Monitor

The DIN-Rail Switch Monitor is designed to monitor the state of one

or more single pole, volt free contacts connected on a single pair of Voltage 17-28vdc
Quiescent current 730µA at 24vdc
cables and to report the status to Ampac compatible analogue control
Max current 5.6mA at 24vdc
equipment. Monitored input voltage 9-11vdc
Operating temperature -20°C to +70°C (no icing)
• Four input states – ’normal’, ’fault’, ’pre-alarm’ and ’alarm’ Relative humidity 0 to 95% (non condensing)
• Two visible LEDs IP Rating IP20
• Loop powered Size 110H x 107W x 20Dmm
Weight 95 grams

DIN-Rail Switch Monitor 55000-822-AMP

DIN-Rail Switch Monitor Plus

The DIN-Rail Switch Monitor Plus is designed to monitor the state of

one or more single pole, volt free contacts connected on a single pair of Voltage 17-28vdc
Quiescent current 730µA at 24vdc
cables and to report the status to Ampac compatible analogue control
Max current 5.6mA at 24vdc
equipment. It has an output for resetting a remote detector and a Opto output voltage 5-30vdc
selectable alarm delay making it suitable for monitoring flow switches. Opto current 1mA
Monitored input voltage 9-11vdc
• Output for resetting a remote detector Operating temperature -20°C to +70°C (no icing)
• Four input states – ’normal’, ’fault’, ’pre-alarm’ and ’alarm’ Relative humidity 0 to 95% (non condensing)
• Two visible LEDs IP Rating IP20
• Selectable alarm delay for monitoring flow switches Size 110H x 107W x 20Dmm
• Loop powered Weight 95 grams

DIN-Rail Switch Monitor Plus 55000-821-AMP

SEA/PAGE 51 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

DIN-Rail Zone Monitor with Isolator

The DIN-Rail Zone Monitor with Isolator powers and controls the operation
of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Voltage 17-28vdc
Quiescent current 4mA + detector load
Discovery or XP95 Loop.
Max current 11mA at 24vdc
Relay contact 30V at 1A clean changeover
• Loop powered Zone voltage 19V ± 1V
• Visible short circuit LED Operating temperature -20°C to +70°C (no icing)
• Built-in isolator Relative humidity 0 to 95% (non condensing)
IP Rating IP54
Size 110H x 107W x 20Dmm
Weight 95 grams

DIN-Rail Zone Monitor with Isolator 55000-812-AMP

DIN-Rail Sounder Control Unit (5 Amps)

The DIN-Rail Sounder Control Unit (5 Amps) is used to control the

operation of a zone of conventional sounders and report their status to Voltage 17-28vdc
Loop quiescent current 1.9mA at 24vdc
the control panel.
Loop max current 4.5mA at 24vdc
External supply 9-50vdc
• Allows sounders to be operated continuously or be pulsed, External quiescent current 3mA at 32V
1 second on, 1 second off External max current 47mA + load
• May be synchronized when in pulsed operation External max load 5A at 35vdc
• An auto-coupled input is provided to monitor the state of the external Operating temperature -20°C to +70°C (no icing)
power supply Relative humidity 0 to 95% (non condensing)
• Sounders can be operated individually or in groups IP Rating IP20
• Will accept a load of 5 amperes Size 110H x 107W x 20Dmm
Weight 95 grams

DIN-Rail Sounder Control Unit 55000-182-AMP

SEA/PAGE 52 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

DIN-Rail Dual Isolator

The DIN-Rail Dual Isolator provides two independent Isolators which sense
and isolate short circuits on Discovery or XP95 loops and spurs. Voltage 17-28vdc
Quiescent current 47µA at 24vdc
Operating temperature -20°C to +60°C (no icing)
• Loop powered Relative humidity 0 to 95% (non condensing)
• Polarity sensitive IP Rating IP20
• Up to 20 detectors can be installed between isolators Size 110H x 107W x 20Dmm
• Allows fully isolated spurs Weight 90 grams

DIN-Rail Dual Isolator 55000-802-AMP

Mini Switch Monitor

The Mini Switch Monitor is an interface within a housing that allows

the unit to be fitted onto standard DIN-Rail with a twist-click motion. It Voltage 17-28vdc
Size 39W x 39H x 20D mm
monitors the state of one or more single pole volt-free contacts on a single
Weight 30 grams
pair of cables.
Mini Switch Monitor 55000-760-AMP
• Designed for use where space is limited
• Three status LEDs
• Built-in isolator
• Interrupt/non-interrupt
• Pre-alarm status

SEA/PAGE 53 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES XP95/DISCOVERY Intelligent

DIN-Rail Interface Enclosures

DIN-Rail Interface Enclosures are available in two sizes and can be used for
housing intrinsically safe (IS) barriers or DIN-Rail mounted interfaces.

• Allows multiple interfaces to be housed together

• IP67
DIN-Rail Interface Enclosure – 4 interfaces 29600-239-AMP
DIN-Rail Interface Enclosure – 10 interfaces 29600-240-AMP

SEA/PAGE 54 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES AMPAC INPUT/OUTPUT DEVICES Intelligent

Single Input Device (SID)

The Single Input Device is an addressable loop device for use on the
Apollo XP95 or Discovery protocol and provides a single monitored Voltage 17-28 VDC
Quiescent current 1.82mA at 24 VDC
input.
Max current 2.37mA at 24 VDC
Monitored input 20k normal 500 - 15k closed
• Interfaces a switch input to an Apollo addressable loop Size – enclosure 132H x 82W x 55D mm
• Loop powered Size – DIN chassis 77H x 57W x 40D mm
• One monitored input Operating temperature -20°C to +60°C (no icing)
• Only one address used Humidity 0 to 95% relative humidity
• Enclosure or DIN-Rail chassis mount IP rating – enclosure IP55
• Status indicators can be switched on and off Weight – enclosure 155 grams
Weight – DIN chassis 75 grams

Single Input Device (SID) – Boxed 201-0300

Single Input Device (SID) – DIN mount 201-0350

Single Input/Output Device (SIOD)

The Single Input/Output Device is an addressable loop device for use on

the Apollo XP95 or Discovery protocol and provides a single monitored Voltage 17-28 VDC
Quiescent current 1.74mA at 24 VDC
input and a voltage free relay output.
Max current 6.84mA at 24 VDC
Relay contact rating 1A at 24 VDC clean changeover
• Interfaces a switch input and a relay output to addressable loop Monitored input 20k normal 500 - 15k closed
• Loop powered Size – enclosure 132H x 82W x 55D mm
• One monitored input Size – DIN chassis 77H x 57W x 40D mm
• Single relay with clean changeover contact Operating temperature -20°C to +60°C (no icing)
• Only one address used Humidity 0 to 95% relative humidity
• Enclosure or DIN-Rail chassis mount IP rating – enclosure IP55
• Status indicators can be switched on and off Weight – enclosure 155 grams
Weight – DIN chassis 75 grams

Single Input/Output Device (SIOD) – Boxed 201-0301

Single Input/Output Device (SIOD) – DIN mount 201-0351

SEA/PAGE 55 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES AMPAC INPUT/OUTPUT DEVICES Intelligent

Three Input Device (3ID)

The Three Input Device is a versatile loop-powered three monitored input

unit device for use on the Apollo XP95 or Discovery protocol. Voltage 17-28 VDC
Quiescent current 1.45mA at 24 VDC
Max current 3.54mA at 24 VDC
• Interfaces three switch inputs to addressable loop Monitored input 20k normal 500 - 15k closed
• Loop powered Size – enclosure 200H x 150W x 60D mm
• Three monitored inputs Size – DIN chassis 98H x 72W x 40D mm
• Only one address used Operating temperature -20°C to +60°C (no icing)
• Enclosure or DIN-Rail chassis mount Humidity 0 to 95% relative humidity
• Status indicators can be switched on and off IP rating – enclosure IP41
Weight – enclosure 500 grams
Weight – DIN chassis 125 grams

Three Input Device (3ID) – Boxed 201-0308

Three Input Device (3ID) – DIN mount 201-0358

Three Input/Output Device (3IOD)

The Three Input/Output Device is a versatile loop-powered unit for use

on the Apollo XP95 or Discovery protocol. It provides three monitored Voltage 17-28 VDC
Quiescent current 2.06mA at 24 VDC
inputs and three voltage free relay outputs.
Max current 19.23mA at 24 VDC
Relay contact rating 1A at 24 VDC clean changeover
• Interfaces three switch inputs and three relay outputs to Monitored input 20k normal 500 - 15k closed
addressable loop Size – enclosure 200H x 150W x 60D mm
• Loop powered Size – DIN chassis 98H x 72W x 40D mm
• Three fault monitored input Operating temperature -20°C to +60°C (no icing)
• Three relays with clean changeover contact Humidity 0 to 95% relative humidity
• Only one address used IP rating – enclosure IP41
• Enclosure or DIN-Rail chassis mount Weight – enclosure 500 grams
Weight – DIN chassis 125 grams
• Status indicators can be switched on and off
Three Input/Output Device (3IOD) – Boxed 201-0309
Three Input/Output Device (3IOD) – DIN mount 201-0359

SEA/PAGE 56 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 INTERFACES AMPAC INPUT/OUTPUT DEVICES Intelligent

Three Input/Output Device (3IOD) EP

The Three Input/Output Device EP is an externally powered unit device

for use on the Apollo XP95 or Discovery protocol. Using an external Voltage 17-28 VDC
Quiescent current – loop 1.51mA at 24 VDC
24VDC power supply, each device draws a minimum amount of loop
Quiescent current – external 5.08mA at 24 VDC
current and provides three monitored inputs and three voltage free relay Max current – loop 7.20mA at 24 VDC
outputs. Max current – external 19.55mA at 24 VDC
Relay contact rating 1A at 24 VDC clean changeover
• Interfaces three switch inputs and three relay outputs to Monitored input 20k normal 500 - 15k closed
addressable loop Size – enclosure 200H x 150W x 60D mm
• Externally powered Size – DIN chassis 98H x 72W x 40D mm
• Three fault monitored input Operating temperature -20°C to +60°C (no icing)
• Three relays with clean changeover contact Humidity 0 to 95% relative humidity
IP rating – enclosure IP41
• Only one address used
Weight – enclosure 500 grams
• Enclosure or DIN-Rail chassis mount Weight – DIN chassis 125 grams
• Status indicators can be switched on or off
Three Input/Output Device (3IOD) EP – Boxed 201-0310
Three Input/Output Device (3IOD) EP – DIN mount 201-0360

SEA/PAGE 57 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 WIRELESS TECHNOLOGY

NEW

XPander
Wireless Technology
Traditionally, fire detection systems in industrial and commercial applications have
used hard wired installations. These systems are generally installed at the time of
construction or refurbishment, making the laying of cables not a great issue. However,
ceratin applications do not lend themselves to this approach, such as occupied
buildings, heritage sites, architecturally sensitive buildings and annexes. This is where
wireless systems provide the ideal solution.

Xpander is a system in which individual detectors, call points and alarm devices
communicate with the XP95 loop by radio signals. An interface is connected to the
loop in the same way as any other interface, such as an input/output unit. The Xpander
range benefits from the patented XPERT technology that is used in Discovery and XP95.

• Easy to install
• XPERT card addressing
• Self-monitoring
• Proven technology
• No special control panel needed
• 868MHz radio channels
• Up to 15 devices per interface
• Up to 5 interfaces per loop

All detectors within the Xpander range are supplied complete with mounting bases.

SEA/PAGE 58 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 WIRELESS TECHNOLOGY APOLLO XPANDER DETECTORS

NEW
Xpander Optical Smoke Detector and Mounting Base

The Xpander Optical Smoke Detector works on the light scatter principle
and is ideal for applications where slow-burning or smouldering fires are Voltage (regulated from radio base) 3VDC
Size inc base 100Dia x 75H mm
likely.
Operating temperature -10°C to +50°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Responds well to slow-burning, smouldering fires IP rating IP23D
• Well suited for bedrooms and escape routes Weight inc base 500 grams
• Modified to function with the low current requirements of radio
systems Xpander Optical Smoke Detector and Mounting Base XPA-CB-12034-AMP
• Bi-directional (monitored) radio platform
• Easy to install
• Powered by two independent packs of AA alkaline batteries with a
typical three year life

Approvals: EN54-7/LPCB

NEW
Xpander Multisensor Detector and Mounting Base

The Xpander Multisensor Detector contains an optical smoke sensor and

a thermistor temperature sensor whose outputs are combined to give the Voltage (regulated from radio base) 3VDC
Size inc base 105Dia x 80H mm
final analogue value.
Operating temperature -10°C to +50°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Sensitive to a wide range of fires IP rating IP23D
• Well suited for environments such as hotel bedrooms Weight inc base 500 grams
• Modified to function with the low current requirements of radio
systems Xpander Optical Smoke Detector and Mounting Base XPA-CB-13032-AMP
• Bi-directional (monitored) radio platform
• Easy to install
• Powered by two independent packs of AA alkaline batteries with a
typical three year life

Approvals: EN54-7/LPCB

SEA/PAGE 59 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 WIRELESS TECHNOLOGY APOLLO XPANDER DETECTORS / MANUAL CALL POINTS

NEW
Xpander Heat Detector and Mounting Base

There are two heat detectors in the Xpander range designed to suit a wide
variety of operating conditions. A static heat detector (CS) which responds Voltage (regulated from radio base) 3VDC
Size inc base 105Dia x 80H mm
only when a fixed temperature has been reached and a rate-of-rise
Operating temperature -10°C to +50°C (no icing)
detector (A1R) which has a fixed upper limit, but in addition, measures the Relative humidity 0 to 95% (non condensing)
rate of increase in temperature. IP rating IP23D
Weight inc base 400 grams
• Can be used in applications where smoke detectors are unsuitable
• Ideal environments that are dirty or smokey under normal conditions Xpander Heat Detector and Mounting Base
• CS detectors are ideal for use in environments with rapid temperature Rate-of-Rise (A1R) XPA-CB-11170-AMP
fluctuations such as boiler rooms Static (CS) XPA-CB-11171-AMP
• Modified to function with the low current requirements of radio
systems
• Bi-directional (monitored) radio platform
• Easy to install
• Powered by two independent packs of AA alkaline batteries with a
typical three year life

Approvals: EN54-5/LPCB

NEW
Xpander Manual Call Point

The XPander Manual Call Point is compliant with EN54:11. It is wireless

and is powered by two independent packs of AA alkaline batteries with a Voltage (regulated from radio base) 3VDC
Size inc back box 89H x 93W x 70D mm
typical three year life.
Operating temperature -10°C to +50°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Uses patented XPERT addressing Weight inc base 151 grams
• Resettable element
• Reports an alarm in under one second Xpander Manual Call Point XPA-MC-14006-AMP

Approvals: EN54-11/LPCB

SEA/PAGE 60 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 WIRELESS TECHNOLOGY APOLLO XPANDER

NEW
Xpander Sounder and Sounder Base

The XPander Sounder and Sounder Base is wireless and designed to be

used with XPander detectors and manual call points only. Voltage 3VDC
Alarm tones (selectable) 32
IP rating IP21C
• Wall mounted Sound output 100dB(A)
• Wireless – eliminates cable problems
• Self test feature Xpander Sounder and Sounder Base (Red) XPA-CB-14001-AMP
• Output is between 92 and 106dB(A) at 1m dependent on tone setting Xpander Sounder and Sounder Base (White) XPA-CB-14002-AMP

NEW
Xpander Sounder Beacon and Sounder Base

The XPander Sounder Beacon and Sounder Base is wireless and designed
to be used with XPander detectors and manual call points only. Voltage 3VDC
Alarm tones (selectable) 32
IP rating IP21C
• Wall mounted Sound output 100dB(A)
• Eliminates cable problems
• Enables DDA compliance Xpander Sounder Beacon (Red) and Base (Red) XPA-CB-14003-AMP
• Self test feature Xpander Sounder Beacon (Amber) and Base (White) XPA-CB-14004-AMP
Xpander Sounder Beacon (Clear) and Base (White) XPA-CB-14005-AMP

SEA/PAGE 61 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 WIRELESS TECHNOLOGY APOLLO XPANDER ANCILLARIES

NEW
Xpander Loop Interface Unit

The XPander Loop Interface Unit communicates between the intelligent

control panel and the XPander detectors as the detectors alone can’t Voltage 24VDC
Alarm current 15mA at 24 VDC
communicate directly with the panel.
Size inc back box 185H x 130W x 45D mm
Operating temperature -10°C to +55°C (no icing)
• Connect up to 15 Xpander devices to a XP95 loop Relative humidity 0 to 95% (non condensing)
• Translates radio signals from Xpander detectors to the control panel Weight 1100 grams
• Incorporates an integral loop isolator and is polarity sensitive
• Loop powered Xpander Interface Unit XPA-IN-14007-AMP
• Integral LCD display provides status of wireless devices

NEW
Xpander Survey Tool

The XPander Survey Tool is used at the site survey stage to ascertain if a
site is suitable for an XPander installation. A site survey must be carried out
before XPander can be installed.

• Tests for radio signal strength

Xpander Survey Tool XPA-MC-14010-AMP

NEW
Xpander Aerials

There are two aerials to complement the Xpander range

• 
Xpander External Aerial is used to strengthen the radio signals sent
between the Xpander Interface Unit and Xpander devices
• 
Xpander External Directional Aerial is used to pick up radio signals from Xpander External Aerial XPA-MC-14008-AMP
outbuildings and annexes Xpander External Directional Aerial XPA-MC-14009-AMP

SEA/PAGE 62 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT

Audio Visual
Signalling
Ampac offers a wide range of Intelligent Audio Visual (AV) signalling devices for use in
conjunction with its range of intelligent and conventional detectors and control panels.
A versatile and functional range offering a huge choice for any application.

• Sounder Bases combine an alarm sounder and detector base

• Beacon Bases combine an alarm beacon and detector base

• Sounder Beacon Bases combine an alarm sounder, beacon and detector base

• Sounders are used to provide an audible indication of an alarm

• Beacons are used to provide an visual flashing indication of an alarm

• Sounder/Beacons are used to provide an audible and flashing indication of an alarm

SEA/PAGE 63 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT SOUNDER BASES

Integrated Sounder Base

The Integrated Sounder Base comprises a base sounder with integral

mounting base and is for use with Discovery or XP95 ranges. It is Voltage (polarity sensitive) 17-28 VDC
Quiescent current 1.2mA
designed for indoor use.
Max current (sounder operated) 5mA
Max sounder output 83dB(A)
• Two volume ranges – 55-75dB and 75-91dB Operating temperature -20°C to +60°C (no icing)
• Synchronisation of ‘alert’ and ‘evacuate’ tones Relative humidity 0 to 95% (non condensing)
• Individual and group addressing IP rating IP21D
• Unique acoustic self-test Size 115Dia x 38H mm
• Integrated base Weight 140 grams
• Isolator option
Integrated Base Sounder 45681-278-AMP
Approvals: LPCB EN54-3/LPCB Integrated Base Sounder with Isolator 45681-277-AMP
Red Cap 45681-293-AMP
White Cap 45681-292-AMP

Ancillary Sounder Base

The Ancillary Sounder Base is a local-area sounder designed for indoor use.
It can be connected only to detection systems using Discovery or XP95 Voltage (polarity sensitive) 17-28 VDC
Quiescent current 100µA
detectors and control panels with appropriate software.
Max current (sounder operated) 3mA
Max sounder output 85dB(A)
• Guaranteed sound output of 85dB(A) at 1 metre Operating temperature -20°C to +60°C (no icing)
• Current consumption of only 3mA Relative humidity 0 to 95% (non condensing)
• Loop-powered IP rating IP23D
• Responds to signals from the associated detector – Size 115Dia x 38H mm
does not have an address of its own Weight 140 grams
• Adjustable volume control
Ancillary Base Sounder 45681-276-AMP
Approvals: LPCB EN54-3/LPCB

SEA/PAGE 64 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT BEACON BASES

Loop-Powered Beacon Base

The Beacon Base is a loop-powered beacon combined with a standard

XP95/Discovery mounting base. It is used to signal a fire alarm in enclosed Voltage (polarity sensitive) 17-28 VDC
Quiescent current 300µA
areas. The Beacon Base can be used either with a detector fitted or with a
Max current 3.1mA
cap for operation as a stand-alone alarm device. Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Beacon flash rate of once per second IP rating IP21D
• Synchronisation of beacon flash Size 115Dia x 31H mm
• Individual and group addressing Weight 109 grams
• Unique beacon self-test
• Isolator option Beacon Base with Isolator 45681-333-AMP
Beacon Base 45681-335-AMP
Approvals: LPCB EN54-3/LPCB Red Cap 45681-293-AMP
White Cap 45681-292-AMP

SEA/PAGE 65 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT SOUNDER BEACON BASES

Sounder Beacon Base

The Sounder Beacon Base is a loop-powered sounder and beacon

combined with a standard Intelligent Mounting Base. It is used to signal a Voltage (polarity sensitive) 17-28 VDC
Quiescent current 300µA
fire alarm in enclosed areas. The Sounder Beacon Base can be used either
Max current (sounder operated) 8mA
with a detector fitted or with a cap for operation as a stand-alone alarm Max sounder output 91dB(A)
device. Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Two volume ranges 55-75dB(A) and 75-91dB(A) IP rating IP21D
• Beacon flash rate of once per second Size 115Dia x 38H mm
• Synchronisation of ‘alert’ and ‘evacuate’ tones Weight 160 grams
• Synchronisation of beacon flash
• Individual and group addressing Sounder Beacon Base 45681-331-AMP
• Unique acoustic and beacon self test Sounder Beacon Base with Isolater 45681-330-AMP
• Enables DDA compliance

Approvals: LPCB EN54-3/LPCB

Discovery Sounder Beacon Base

The Discovery Sounder Beacon Base is a multi-functional device

comprising a mounting base for Discovery fire detectors, a sounder, a Voltage (polarity sensitive) 17-28 VDC
Quiescent current 350µA
beacon and a short circuit isolator. It makes full use of the Discovery
Max current (sounder operated) 8mA
protocol and for ease of commissioning a ‘magnetic wand’ can be used to Max sounder output 90dB(A)
test and adjust each sounder locally. Operating temperature -20°C to +60°C (no icing)
Relative humidity 0 to 95% (non condensing)
• Set individual control of the sounder and beacon IP rating IP21D
• Select volume and tone settings from the control panel Size 115Dia x 31H mm
• Tones can be used for purposes in addition to fire – ideal for schools Weight 160 grams
• Soft start option – ideal for hospitals and nursing homes
• Electronic bell tone Discovery Sounder Beacon Base 45681-393-AMP

Approvals: LPCB EN54-3/LPCB

SEA/PAGE 66 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT SOUNDERS

Intelligent 100dB(A) Open Area Sounder

The Intelligent 100dB(A) Open Area Sounder is designed for use in open
areas and can be connected to any Discovery or XP95 system. Voltage (polarity sensitive) 17-28 VDC
Quiescent current 1.2mA
Max current (sounder operated) 5mA
• Output is 100dB (A) at 90° Max sounder output 100dB(A)
• Current consumption of 5.0mA Operating temperature -20°C to +60°C (no icing)
• Can be synchronised Relative humidity 0 to 95% (non condensing)
• Group address facility IP rating IP21C
• Loop powered Size 105L x 105W x 95H mm
• Wall mounted Weight 215 grams

Approvals: LPCB EN54-3/LPCB Loop Powered Sounder (Red) 45681-278-AMP

Loop Powered Sounder (White) 45681-279-AMP

Intelligent Weatherproof 100dB(A) Open Area Sounder

The Intelligent Weatherproof 100dB(A) Open Area Sounder is designed for

use in open areas and can be connected to any Discovery or XP95 system. Voltage (polarity sensitive) 17-28 VDC
Quiescent current 1.2mA
The sounder comprises a backbox and sounder unit supplied together.
Max current (sounder operated) 5mA
Max sounder output 100dB(A)
• IP 66 (immune to the affects of wind and precipitation) Operating temperature -20°C to +60°C (no icing)
• Output is 100dB (A) at 90° Relative humidity 0 to 95% (non condensing)
• Current consumption of 5.0mA IP rating IP66
• Can be synchronised Size 110L x 110W x 113H mm
• Group address facility Weight 340 grams
• Loop powered
• Wall mounted Weatherproof Loop-Powered Sounder (Red) 45681-274-AMP
Weatherproof Loop-Powered Sounder (White) 45681-275-AMP
Approvals: LPCB EN54-3/LPCB

SEA/PAGE 67 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT SOUNDERS

NEW
Intelligent Open-Area Sounder (Sonos)

The Intelligent Open-Area Sounder has been designed for use in open
areas and can be connected to any Discovery or XP95 system. Voltage (polarity sensitive) 17-28 VDC
Quiescent current 333µA
Max current (sounder operated) 5mA
• Self-test fault monitoring Max sounder output 100dB(A)
• Choice of tones Operating temperature -10°C to +55°C (no icing)
• Group addressing and synchronisation of alarm Relative humidity 0 to 95% (non condensing)
• Weatherproof IP65 IP rating IP65
• Comes with Isolating Base as standard Size 104Dia x 95.5H mm
• Loop powered Weight 225 grams

Approvals: LPCB EN54-3/LPCB Intelligent Open Area Sounder (Red) Sonos 55000-001-AMP
Intelligent Open Area Sounder (White) Sonos 55000-002-AMP

SEA/PAGE 68 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT BEACONS

Loop-Powered Beacon

The Loop-Powered Beacon is a local-area beacon designed for indoor use.

The beacon has been developed as a supplement to sounders for use in Voltage (polarity sensitive) 17-28 VDC
Quiescent current 150µA
situations where there is a risk that sounders will not be heard.
Max current (beacon operated) 3mA
Flash rate 1Hz
• High intensity LED – more reliable than xenon beacons Operating temperature -20°C to +60°C (no icing)
• Automatic LED check Relative humidity 0 to 95% (non condensing)
• Lockable IP rating IP23D
• Wide angle of visibility Size 115Dia x 38H mm
• Enables DDA compliance Weight 140 grams
• Synchronised flash
• Can be used with Discovery or XP95 Loop-Powered Beacon (Red) 55000-877-AMP
Loop-Powered Beacon (Clear Lens/Red Flash) 55000-878-AMP
Loop-Powered Beacon (Amber) 55000-879-AMP

NEW
Intelligent Open-Area Beacon (Sonos)

The Intelligent Open-Area Beacon has been developed for use in situations
where there is a risk that sounders will not be heard. It is weatherproof and Voltage (polarity sensitive) 17-28 VDC
Quiescent current 333µA
can be used outside.
Max current (beacon operated) 3.1mA
Flash rate 1Hz
• Self-test fault monitoring Operating temperature -10°C to +55°C (no icing)
• Weatherproof IP65 Relative humidity 0 to 95% (non condensing)
• Group addressing IP rating IP65
• Synchronisation of alarm Size 104Dia x 97.5H mm
• Comes with Isolating Base as standard Weight 205 grams
• Loop powered
Intelligent Open Area Beacon (Red) Sonos 55000-009-AMP
Intelligent Open Area Beacon (Clear) Sonos 55000-010-AMP

SEA/PAGE 69 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT SOUNDER/BEACONS

Multi-Tone Open-Area Sounder Beacon

The Multi-Tone Open-Area Sounder Beacon is designed for use in indoor

open areas and can be connected to any Discovery or XP95 system. Voltage (polarity sensitive) 17-28 VDC
Quiescent current 333µA
The sounder beacon complements Apollo’s open area integrated base
Max current (sounder/beacon operated) 9mA
sounders as well as the intelligent 100dB(A) open area sounder. Max sounder output 100dB(A)
Flash rate 1Hz
• Powerful LED combined with 100dB sound output Operating temperature -10°C to +55°C (no icing)
• Two volume settings Relative humidity 0 to 95% (non condensing)
• Synchronisation of ‘alert’ and ‘evacuate’ tones IP rating IP21C
• Individual and group addressing Size 105L x 105W x 50H mm
• Three tone choices Weight 209 grams
• Enables DDA compliance
Multi-Tone Open-Area Sounder Beacon (Red) with Isolator 55000-293-AMP
Approvals: LPCB EN54-3/LPCB Multi-Tone Open-Area Sounder Beacon (White) with Isolator 55000-294-AMP

Weatherproof Multi-Tone Open-Area Sounder Beacon

The Weatherproof Multi-Tone Open-Area Sounder Beacon is designed

for use in outdoor open areas and can be connected to any Discovery or Voltage (polarity sensitive) 17-28 VDC
Quiescent current 333µA
XP95 system. The sounder beacon complements Apollo’s intelligent and
Max current (sounder/beacon operated) 9mA
integrated base sounders as well as the loop powered 100dB sounder. Max sounder output 100dB(A)
Flash rate 1Hz
• IP66 (immune to the affects of wind and precipitation) Operating temperature -20°C to +70°C (no icing)
• Powerful LED combined with 100dB sound output Relative humidity 0 to 95% (non condensing)
• Two volume settings IP rating IP66
• Synchronisation of ‘alert’ and ‘evacuate’ tones Size 110L x 110W x 113H mm
• Individual and group addressing Weight 294 grams
• Three tone choices
• Enables DDA compliance Weatherproof Multi-Tone Open-Area Sounder Beacon
(Red) with Isolator 55000-298-AMP
Weatherproof Multi-Tone Open-Area Sounder Beacon
Approvals: LPCB EN54-3/LPCB
(White) with Isolator 55000-299-AMP

SEA/PAGE 70 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING XP95/DISCOVERY INTELLIGENT SOUNDER/BEACONS

NEW
Intelligent Open-Area Sounder Beacon

The Intelligent Open-Area Sounder Beacon has been designed for use in
open areas and can be connected to any Discovery or XP95 system. Voltage (polarity sensitive) 17-28 VDC
Quiescent current 333µA
Max current (sounder/beacon operated) 8mA
• Gives two functions at one point Max sounder output 100dB(A)
• Self-test fault monitoring Flash rate 1Hz
• Choice of tones Operating temperature -10°C to +55°C (no icing)
• Group addressing and synchronisation of alarm Relative humidity 0 to 95% (non condensing)
• Comes with Isolating Base as standard IP rating IP65
• Loop powered Size 104Dia x 97.5H mm
Weight 260 grams
Approvals: LPCB EN54-3/LPCB
Intelligent Open Area Sounder Beacon (Red) Sonos 55000-005-AMP
Intelligent Open Area Sounder Beacon (Clear) Sonos 55000-006-AMP

SEA/PAGE 71 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING AMPAC BELLS

Fire Alarm Bell 150mm

• Motorised mechanism
• Low current consumption Voltage 24 VDC
Operating current 25mA
• Red finish with FIRE lettering
Size (without back box) 150Dia x 56D mm
• Suitable for indoor use Sound Level 92 dB @ 3m
• Back box available – 206-0006 Operating temperature -10°C to +55°C (no icing)
Weight 764 grams

Bell 150mm 206-0012

Fire Alarm Bell 200mm

• Red finish with FIRE lettering

• Solenoid actuating mechanism Voltage 19-27 VDC
Operating current 100mA
• Suitable for indoor use
Size (without back box) 200Dia x 70D mm
• Back box available – 206-0006 Sound Level 85 dB @ 3m
Operating temperature -20°C to +70°C (no icing)
Weight 1.25kg

Bell 200mm 24Vdc 206-0001

Bell Back Box

• Allows surface mounting of bell

• Screw thread conduit entry and protection for wiring terminals Material Aluminium cast
Finish Red
• Red finish
Depth 40 mm
• Weather seal Weight 270 grams

Bell Back Box for 206-0012 and 206-0001 206-0006

SEA/PAGE 72 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING AMPAC STROBES

ASL-30 Xenon Beacon/Strobe

• Red, amber, or blue lens options Voltage 20 to 28 VDC

• Compact size Current (at 24 VDC ) 1W 42mA
• ABS/polycarbonate/acrylic construction 3W 135mA,
• Easy-fit BESA, junction box adaptor/mounting base 5W 155mA
Size inc base 77Dia x 65H mm
Flash rate 60 per minute
Operating temperature -30°C to + 70°C
IP rating IP65
Weight inc base 106 grams

ASL-30 Strobe 24Vdc Red 1 Watt 208-0030

ASL-30 Strobe 24Vdc Red 3 Watt 208-0032
ASL-30 Strobe 24Vdc Red 5 Watt 208-0033
ASL-30 Strobe 24Vdc Amber 1 Watt 208-0034
ASL-30 Strobe 24Vdc Amber 3 Watt 208-0036
ASL-30 Strobe 24Vdc Amber 5 Watt 208-0037
ASL-30 Strobe 24Vdc Blue 1 Watt 208-0038
ASL-30 Strobe 24Vdc Blue 3 Watt 208-0040
ASL-30 Strobe 24Vdc Blue 5 Watt 208-0041
ASL-30 Strobe Adapter Plate 208-0024

SEA/PAGE 73 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING AMPAC REMOTE INDICATORS

Fire Alarm Remote Indicator – Round

• Detector activation indicator

• 5mm Red LED Voltage 24 VDC
Current at 24v 1.5mA
• Compact size
Size 74Dia x 16H mm
• Modern styling Weight 26 grams
• For conventional or analogue detectors
• Choice of legend Remote Indicator – Blank 209-0001
Remote Indicator – Fire Alarm in Concealed Space 209-0004
Remote Indicator – Fire Alarm in Roof Space 209-0005
Remote Indicator – Fire Alarm in Room 209-0006
Remote Indicator – Fire Alarm in Duct 209-0007
Remote Indicator – Fire Alarm in Cupboard 209-0008
Remote Indicator – Fire Alarm 209-0020
Remote Indicator – Detector Activated 209-0023

Fire Alarm Flashing Indicator/Buzzer with Mute

• Alarm activation indicator and buzzer

• 10mm red flashing LED Voltage 24 VDC
Current at 24v 43mA
• Buzzer with mute facility
LED flash rate 45 per minute
• M  odern styling Buzzer 3.8kHz @ 114dBA
Size (UK single gang plate) 86H x 86W x 5D mm
Weight 89 grams

Flashing Indicator/Buzzer with Mute Switch 209-0022

SEA/PAGE 74 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING FULLEON SOUNDERS

Roshni Sounder

The Roshni Low Profile (RoLP) is the fire alarm markets leading
conventional alarm sounder. The wide operating voltage and range of Voltage 9 - 28Vdc
Current 16mA (Typical Tone 3)
tones available to the user make this flexible sounder supremely adaptable
Sound Output 102dB(A) (Typical Tone 3)
in even its most basic forms. Tones 32
Volume Control 20dB
• High sound output Monitoring Reverse polarity
• Low current consumption Temperature -25°C to +70°C
• 32 tones (user selectable) Protection IP54 (shallow base)
• Automatic synchronisation IP65 (deep/’U’ base)
• Volume control Construction ABS
• Second tone for two stage alarms Size 93mm Dia x 63mm H (shallow base)
93mm Dia x 93mm H (deep base)
• Lockable base
Weight 0.25Kg
• Suitable for outdoor use (deep and ‘U’ base only)
Roshni Sounder, red, shallow base ROLP/R/S
Approvals: EN54-3/LPCB Roshni Sounder, red, deep base ROLP/R/DB
Roshni Sounder, red, deep ‘U’ base ROLP/R/U

110/230 VAC versions available on request

SEA/PAGE 75 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING FULLEON SOUNDERS

Squashni G3

The third generation Squashni G3 amalgamates the best features

of the Squashni and Squashni Micro into a single sounder. The Voltage 18 - 28Vdc
Current 4/5mA
large flat surface allows the mounting of most popular European
Sound Output 90dB(A)
detectors, while the high efficiency and low operating current Tones 8
permit compatibility with many systems. A combined audible and Volume Control 10dB
visual version is also available. Monitoring Reverse polarity
Temperature -10°C to +55°C
• Fixing platform for most popular detectors Protection IP21C
• Low current consumption Construction ABS
• Tamper proof cap for standalone use (supplied separately) Size 114mm Dia x 35mm H
• First fix base for easier installation Weight 0.16Kg
Colours White
• Combined sounder & beacon version available
• Led triggered option available
Squashni Ceiling Base Sounder SQ/G3/W
Blanking Cover/Cap (Pack of 5) SQ/G3/CAP

SEA/PAGE 76 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING FULLEON BEACONS

Solista LED Beacon

LED beacons are available to complement audible alarms for use

in areas where people may be present who have impaired hearing Voltage 10 - 30Vdc
Current 3m - 5mA (user selectable)
or areas with high ambient noise levels. LED technology offers a
Light Output >0.5Cd or 1Cd (user selectable)
greatly reduced current consumption compared to Xenon types Flash Rate 0.5Hz / 1Hz (user selectable)
making them ideal for use with fire panels with restricted sounder Monitoring Reverse polarity
circuit current capacity. Temperature -10°C to +55°C
Protection IP21C (shallow base)
• Ultra low current – LED technology IP33C (deep base)
• High reliability Construction ABS, PC lens
• Long service life Size 93mm Dia x 53mm H (shallow base)
• Locking base 93mm Dia x 83mm H (deep/U base)
Weight 0.1Kg
• Compact size
Solista LED Beacon, shallow base SOL/RL/R/S
Solista LED Beacon, deep base SOL/RL/RD
Solista LED Beacon, ‘U’ base SOL/RL/RU

110/230 VAC versions available on request

SEA/PAGE 77 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING FULLEON SOUNDER / BEACONS

RoLP Solista Sounder/LED Beacon

The use of beacons to supplement audible alarms is becoming

increasingly common. A combined sounder beacon allows both an Voltage 9 - 28Vdc
Current 19mA (Typical Tone 3)
audible and visual alarm to be provided but requires only a single
Sound Output 101dB(A) (Typical Tone 3)
installation point. LED beacons have a dramatically lower current Tones 32
consumption than that of traditional xenon beacons making them Light Output > 0.5Cd
ideal for applications where sounder circuit capacity is limited. Flash Rate 1Hz
Volume Control 20dB
• Ultra low current – LED technology Monitoring Reverse polarity
• Sounder & beacon with a single installation point Temperature -10°C to +54°C
• Unobtrusive low profile design Protection IP54 (shallow base)
• Standard Fulleon base simplifies system upgrades IP65 (deep base)
Construction ABS, PC lens
• Lockable base
Size 93mm Dia x 78mm H (shallow base)
93mm Dia x 110mm H (deep/U base)
Weight 0.3Kg

RoLP Solista Sounder/LED Beacon, shallow base ROLPSB/RL/R/S

RoLP Solista Sounder/LED Beacon, deep base ROLPSB/RL/RD

110/230 VAC versions available on request

SEA/PAGE 78 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING KAC MANUAL CALL POINTS

KAC Indoor Manual Call Point

The KAC Indoor Manual Call Point can be configured as either a break glass
or resettable unit by simply changing from one element to another. No Voltage 30 VDC
Contact rating (switch only) 2 Amps – 30 VDC
other additional parts or alternative products need to be ordered.
Resistor 470Ω
Operating temperature -10°C to +55°C
All MCP indoor call point products also help preserve the integrity of the Humidity 0-95% (no condensation)
overall system as illegal removal of the product lid will result in the call IP rating IP24D
point operating and the system going into alarm. Size (flush mount) 93H x 89W x 27.5D mm
Size (surface mount) 93H x 89W x 59.5D mm
Full compliance with the latest standards is essential and the new MCP Weight (flush mount) 110 grams
indoor call point range is fully approved to the latest EN54-11 standard. Weight (surface mount) 160 grams
The MCP1B product version allows for connection to ‘Savwire’ systems.
Indoor MCP, red, surface, glass element MCP1A-R470SG-01
Indoor MCP, red, surface, resettable flexible element MCP1A-R470SF-01
• Unique ‘Plug & Play’ installation concept Indoor MCP, red, flush, glass element MCP1A-R470FG-01
• Total ‘Flex-Ability’ in the choice of operating element Indoor MCP, red, flush, resettable flexible element MCP1A-R470FF-01
• Anti-Tamper facility Indoor MCP, yellow, surface, glass element MCP1A-Y470SG-11
• Enhanced aesthetics
• Fully approved to the latest standards Indoor MCP, Savwire, red, surface, glass element MCP1B-R470SG-01
• Backward compatibility Indoor MCP, Savwire, red, surface, resettable flexible element MCP1B-R470SF-01
Indoor MCP, Savwire, red, flush, glass element MCP1B-R470FG-01
Approvals: EN54-11/LPCB Indoor MCP, Savwire, red, flush, resettable flexible element MCP1B-R470FF-01

SEA/PAGE 79 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING KAC MANUAL CALL POINTS

KAC Outdoor Manual Call Point

The outdoor WCP is an IP67 sealed manual call point product. The
enhanced environmental protection allows the unit to be installed in Voltage 30 VDC
Contact rating (switch only) 2 Amps – 30 VDC
many external environments where water and dirt are likely to be present,
Resistor 470Ω
making it a true waterproof and outdoor product. Operating temperature -30°C to +70°C
Humidity 0-95% (no condensation)
• Sealed to IP67 IP rating IP67
• Unique ‘Plug & Play’ installation concept Size 93H x 97.5W x 71D mm
• Total ‘Flex-Ability’ in the choice of operating element Weight 240 grams
• Anti-Tamper facility
• Enhanced aesthetics and compact design Outdoor MCP, red, surface, glass element WCP1A-R470SG-K13-01
• Fully approved to the latest standards Outdoor MCP, red, surface, resettable flexible element WCP1A-R470SF-K13-01
Outdoor MCP, yellow, surface, glass element WCP1A-Y470SG-K13-11
Outdoor MCP, Savwire, red, surface, break glass element WCP1B-R470SG-K13-01
Approvals: EN54-11/LPCB

KAC Outdoor Manual Call Point Accessories

• Spare or replacement call point test key Flexible Element for Resettable Call Points PS210
• Transparent protective cover Universal Transparent Hinged Cover PS200
• Replaceable flexible or glass elements Universal Test Key for KAC Call Points – Pack of 10 SC070
Glass Elements – Pack of 10 KG1 x10

SEA/PAGE 80 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING KLAXON SONOS SOUNDERS / LED BEACONS

Sonos Sounder

A general purpose electronic sounder for fire, security and industrial

applications.. Deep base units have weatherproof protection to IP65 and Audibility at 1m (tone dependent) Up to 106dB (A)
Tones 32
can be used in all locations both indoors and outdoors.
Voltage 9-60V DC
Current (tone dependent) 4-41mA
• Simple `First Fix` installation – TimeSaver base IP Rating IP65 (deep base)
• Smooth flow cabling for faster installation Operating temperature -25°C to +70°C
• Quick connect/disconnect Weight 215 grams (shallow base)
• Tone and volume can be preset or adjusted off-base 250 grams (deep base)
• Weatherproof to IP65 (deep base units)
• Synchronised alarm tones Red Sonos Sounder, shallow base 18-980450-AMP
Red Sonos Sounder, deep base 18-980451-AMP
Approvals: EN54-3/LPCB White Sonos Sounder, shallow base 18-980475-AMP
White Sonos Sounder, deep base 18-980476-AMP

Sonos LED Beacon

A general purpose beacon for fire, security and industrial applications.

Deep base units have weatherproof protection to IP65 and can be used Voltage 17-60V DC
Current 5mA
in all locations both indoors and outdoors. The Sonos Beacon utilises a
IP Rating IP65 (deep base)
full faced, translucent case which provides a much larger lens area and a Operating temperature -25°C to +70°C
greater spread of light. Weight 215 grams (shallow base)
250 grams (deep base)
• Simple `First Fix` installation – TimeSaver base
• Weatherproof to IP65 (deep base units) Red Lens Sonos LED Beacon, red shallow base 18-980507-AMP
• High efficiency LED beacon consumes less than 5mA Red Lens Sonos LED Beacon, red deep base 18-980508-AMP
• Low current LED beacon as standard Clear Lens Sonos Red LED Beacon, white shallow base 18-980609-AMP
Clear Lens Sonos Red LED Beacon, white deep base 18-980610-AMP

SEA/PAGE 81 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 AUDIO VISUAL SIGNALLING KLAXON SONOS SOUNDER BEACONS & BASES

Sonos Sounder Beacon

A general purpose electronic sounder beacon for fire, security and

industrial applications. Deep base units have weatherproof protection to Audibility at 1m (tone dependent) Up to 106dB (A)
Tones 32
IP65 and can be used in all locations both indoors and outdoors. A full
Voltage 17-60V DC
faced, translucent sounder case rather than a separate add-on beacon Current 4-45mA (sounder)
gives a much larger lens area and a greater spread of light. 5mA (beacon)
IP Rating IP65 (deep base)
• Simple `First Fix` installation – TimeSaver base Operating temperature -25°C to +70°C
• Quick connect/disconnect Weight 215 grams (shallow base)
• Tone and volume can be preset or adjusted off-base 250 grams (deep base)
• Weatherproof to IP65 (deep base units)
• Low current LED beacon Red Lens Sonos LED Beacon, shallow base 18-980500-AMP
• Sounder and beacon can be controlled separately Red Lens Sonos LED Beacon, deep base 18-980501-AMP
Clear Lens Sonos LED Beacon, shallow base, red LEDs 18-980607-AMP
Clear Lens Sonos LED Beacon, deep base, red LEDs 18-980608-AMP
Approvals: EN54-3/LPCB

Sonos Universal Sounder Base / Sounder Beacon Base

The Sonos Universal Base Sounder Base and Sounder Beacon Base are low
profile units. Their prime application is to be installed under proprietary Audibility at 1m (tone dependent) Up to 95dB (A)
Voltage 17-60V DC
smoke and heat detectors to provide both detection and alarm at the
Tones 32
same point, reducing wiring and installation costs. Current 2-8mA
Operating temperature -10°C to +55°C
• Two large cable entries for quick and simple installation Weight 100 grams
• Keyhole fixing points for ease of installation
• Designed to complement a variety of detectors Universal Base Sounder – white 18-980532-AMP
• Volume control for maximum flexibility Universal Base Sounder – cream 18-980533-AMP
• Cover plate available for use as a sounder or sounder beacon only Universal Base Sounder LED Beacon – white 18-980682-AMP
• Unique beacon design for optimised light coverage Universal Base Sounder LED Beacon – cream 18-980685-AMP
Base Sounder Cover – white 18-980560-AMP
Base Sounder Cover – cream 18-980564-AMP
Approvals: EN54-3/LPCB

SEA/PAGE 82 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT

 CONTACT

SINGAPORE MALAYSIA

Twilight Vision Pte Ltd Demiplex Sdn Bhd

1 Yishun Street No 56 Jalan BP 5/11
23 #04-50 YS-ONE Bandar Bukit Puchong
Singapore 768441 Malaysia 47100

Telephone: Telephone:
+65 6752 7335 +603 8060 2121
Fax: Fax:
+65 6481 0046 +603 8068 2525
Email: Web:
[email protected] www.demiplex.com
Web:
www.twilightvision.com.sg Contact:
Timothy Kang
Contact:
Vincent Chan

HEAD OFFICE – PERTH

Ampac Technologies Pty Ltd

7 Ledgar Road, Balcatta, Western Australia, 6021
Telephone: +618 9201 6100
Fax: +618 9201 6101
Email: [email protected]
Web: www.ampac.net

As part of Ampac’s commitment to continuous improvement, specifications

may change without notice.
Version SEA 17/5/2012

Planned, written, designed and produced by Right Angle • www.rightangle.co.uk

SEA/PAGE 83 CONTACT AMPAC HOME CONTENTS SEARCH ZOOM PRINT EXIT