Scribd
Upload
554 views4 pages

Epoxy NPEL 128

This document provides a material safety data sheet for NPEL-128, a bisphenol-A epoxy resin produced by NAN YA Plastics Corporation. It lists the product ingredients, hazards, safe handling and storage procedures, personal protective equipment needs, and disposal considerations. The product is an irritant and may cause sensitization through skin contact or eyes. Proper ventilation, protective gear, and avoiding ignition sources are recommended.

Uploaded by

yusepsetiana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
554 views4 pages

Epoxy NPEL 128

This document provides a material safety data sheet for NPEL-128, a bisphenol-A epoxy resin produced by NAN YA Plastics Corporation. It lists the product ingredients, hazards, safe handling and storage procedures, personal protective equipment needs, and disposal considerations. The product is an irritant and may cause sensitization through skin contact or eyes. Proper ventilation, protective gear, and avoiding ignition sources are recommended.

Uploaded by

yusepsetiana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Page 1/4

Material Safety Data Sheet


NAN YA Ident No.: EL128 Revision：2009-05-01
──────────────────────────────────────────────
1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY
Trade name:
NPEL-128
Company identification:
NAN YA Plastics Corporation
201, Tung Hwa North Road, Taipei, Taiwan, R.O.C.
Telephone: 886-2-27178257~8
Telefax: 886-2-27182258
Emergency telephone: 886-2-26806311 EXT724

2. COMPOSITION / INFORMATION OF INGREDIENTS

Ingredients : Bisphenol-A epoxy resin(number average molecular weight < 700)


CAS-No. : 25068-38-6
Hazard symbols : Xi
R-phrases : R36/38-R43
Concentration : >99.9%

3. HAZARDS IDENTIFICATION OF THE PRODUCT


Irritating to eyes and skin, may cause sensitization by skin contact.

4. FIRST AID MEASURES


After skin contact:
Rinse with plenty of water and soap. Remove contaminated clothes.
After eye contact:
Rinse immediately with plenty of water for at least 15 minutes, and seek medical
advice.
After inhalation:
Move to fresh air. Seek medical advice if symptoms persist.
After ingestion:
Do not vomiting; instantly seek medical advice.

5. FIRE-FIGHTING MEASURES
Suitable extinguishing media:
Foam, dry powder, carbon dioxide, water spray jet.
Unsuitable extinguishing media:
Page 2/4

Material Safety Data Sheet


NAN YA Ident No.: EL128 Revision：2009-05-01
──────────────────────────────────────────────
High pressure water jet.
Special protective equipment for firefighters:
Wear self-contained breathing apparatus.
Wear protective equipment.

6. ACCIDENTAL RELEASE MEASURES


Personal precautions
Keep away ignition sources.
Wear suitable protective equipment.
Environmental precautions
Do not allow to enter drainage system, surface or ground water.
Method for cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste.

7. HANDLING AND STORAGE


Handing:
Ensure good ventilation/suction at the workplace.
Avoid open flames and sources of ignition.
Storage:
Keep away from food and drink.
Keep container tightly sealed.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION


Engineering controls:
Ensure for good ventilation/suction.
Control parameters:
None
Personal protection equipment
Respiratory protection: suitable breathing mask when there is inadequate
ventilation.
Hand protection: suitable protective gloves.
Eye protection: protective goggles.
Skin and body protection: suitable protective clothes.

9. PHYSICAL AND CHEMICAL PROPERTIES


Page 3/4

Material Safety Data Sheet


NAN YA Ident No.: EL128 Revision：2009-05-01
──────────────────────────────────────────────
Physical state : liquid
Color : yellowish
Boiling point : >150℃
Flash point : >250℃
Density :（20℃）1.16g/cm3
Solubility :（20℃）practically insoluble in water.
Viscosity :（25℃）12000~15000cps

10. STABILITY AND REACTIVITY


Conditions to avoid:
Avoid static electricity discharge.
Material to avoid:
Strong acid, strong base, strong oxidizer and amines.
Hazardous decomposition products
In fire toxic fumes may be generated.

11. TOXICOLOGICAL INFORMATION


Ingestion:
Acute oral toxicity: LD50 10000~11400 mg/kg body weight.
Skin contact:
Irritating to skin.
Eye contact:
Irritating to eyes.

12. ECOLOGICAL INFORMATION


Biological degradability:
Not readily biodegradable.
Bioaccumulation:
No information available.
Ecotoxicity:
Toxic to aquatic organisms.(LC50 between 1 and 10 mg/L)

13. DISPOSAL CONSIDERATIONS


Dispose of according to regulations.

14. TRANSPORT INFORMATION


Page 4/4

Material Safety Data Sheet


NAN YA Ident No.: EL128 Revision：2009-05-01
──────────────────────────────────────────────
Transport over land ADR/RID
NOT REGULATED FOR TRANSPORT
Transport over sea IMDG
NOT REGULATED FOR TRANSPORT
Transport by air ICAO/IATA
NOT REGULATED FOR TRANSPORT

15. REGULATORY INFORMATIONS

Hazard labels : Xi Irritant


R-phrases : R36/38 Irritating to eyes and skin.
R43 May cause sensitization by skin contact
S-phrases : S26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
S28 After contact with skin, wash immediately with plenty of
water and soap.
S37/39 wear suitable gloves and eye/face protection.

16. OTHER INFORMATION


This information is based on our current level of knowledge and relates to the
products in the states in which it is delivered. It is intended to describe our products from
the point of view of safety requirements and is not intended to guarantee any particular
properties.

You might also like