uA9639C

DUAL DIFFERENTIAL LINE RECEIVER

SLLS113C – OCTOBER 1986 – REVISED MARCH 1997

D Operates From Single 5-V Power Supply P PACKAGE

D Wide Common-Mode Voltage Range

(TOP VIEW)

D High Input Impedance VCC 1 8 1IN +

D TTL-Compatible Outputs 1OUT 2 7 1IN –
D High-Speed Schottky Circuitry 2OUT 3 6 2IN +
D 8-Pin Dual-In-Line Packages GND 4 5 2IN –

D Designed to Be Interchangeable With

National DS9639AC

description
The uA9639C is a dual differential line receiver designed to meet ANSI Standards EIA/TIA-422-B and
EIA/TIA-423-B and ITU Recommendations V.10 and V.11. It utilizes Schottky circuitry and has TTL-compatible
outputs. The inputs are compatible with either a single-ended or a differential-line system. This device operates
from a single 5-V power supply and is supplied in an 8-pin, dual-in-line package.
The uA9639C is characterized for operation from 0°C to 70°C.

logic symbol† logic diagram

8 8
1IN + 2
1IN + 2 1OUT
7 1OUT 7
1IN –
1IN –
6 6
2IN + 3
2IN + 3 2OUT
5 2OUT 5
2IN –
2IN –

† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC

Publication 617-12.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Copyright  1997, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

uA9639C
DUAL DIFFERENTIAL LINE RECEIVER
SLLS113C – OCTOBER 1986 – REVISED MARCH 1997

schematics of inputs and outputs

EQUIVALENT OF EACH INPUT TYPICAL OF ALL OUTPUTS

VCC
VCC
50 Ω NOM

8 kΩ
Input

Output

Current
Source

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 15 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 15 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V
Low-level output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential input voltage, are with respect to the network ground terminal.
2. Differential input voltage is measured at the noninverting input with respect to the corresponding inverting input.
DISSIPATION RATING TABLE
TA ≤ 25°C OPERATING FACTOR TA = 70°C
PACKAGE
POWER RATING ABOVE TA = 25°C POWER RATING
P 1000 mW 8.0 mW/°C 640 mW

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 uA9639C
DUAL DIFFERENTIAL LINE RECEIVER
SLLS113C – OCTOBER 1986 – REVISED MARCH 1997

recommended operating conditions

MIN NOM MAX UNIT
Supply voltage, VCC 4.75 5 5.25 V
Common-mode input voltage, VIC ±7 V
Operating free-air temperature, TA 0 70 °C

electrical characteristics over recommended ranges of supply voltage, common-mode input

voltage, and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP† MAX UNIT
0.2
VIT + Positive going input threshold voltage
Positive-going See Note 3 V
0.4
– 0.2
VIT– Negative going input threshold voltage
Negative-going See Note 3 V
– 0.4‡
Vhys Hysteresis voltage (VIT+ – VIT– ) 70 mV
VOH High-level output voltage VID = 0.2 V, IO = – 1 mA 2.5 3.5 V
VOL Low-level output voltage VID = – 0.2 V, IO = 20 mA 0.35 0.5 V
VCC = 0 to 5.5 V,, VI = 10 V 1.1 3.25
II Input current mA
See Note 4 VI = – 10 V – 1.6 – 3.25
IOS Short-circuit output current§ VO = 0, VID = 0.2 V – 40 – 75 – 100 mA
ICC Supply current VID = – 0.5 V, No load 35 50 mA
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The algebraic convention, in which the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold levels
only.
§ Only one output should be shorted at a time, and duration of the short circuit should not exceed one second.
NOTES: 3. The expanded threshold parameter is tested with a 500-Ω resistor in series with each input.
4. The input not under test is grounded.

switching characteristics, VCC = 5 V, TA = 0°C to 70°C

PARAMETER TEST CONDITIONS MIN MAX UNIT
tPLH Propagation delay time, low- to high-level output 85 ns
CL = 50 pF,
pF See Figure 1
tPHL Propagation delay time, high- to low-level output 85 ns

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3

uA9639C
DUAL DIFFERENTIAL LINE RECEIVER
SLLS113C – OCTOBER 1986 – REVISED MARCH 1997

PARAMETER MEASUREMENT INFORMATION

VCC + Output VCC + 0.5 V
Input
(see Note B) 50% 50%
Input 392 Ω
– 0.5 V
51 Ω tPLH tPHL

Output 1.5 V 1.5 V

CL 3.92 kΩ
(see Note A)

TEST CIRCUIT VOLTAGE WAVEFORMS

NOTES: A. CL includes probe and jig capacitance.

B. The input pulse is supplied by a generator having the following characteristics: tr ≤ 5 ns, tf ≤ 5 ns, PRR ≤ 5 MHz, duty cycle = 50%.

Figure 1. Test Circuit and Voltage Waveforms

TYPICAL CHARACTERISTICS

OUTPUT VOLTAGE OUTPUT VOLTAGE

vs vs
DIFFERENTIAL INPUT VOLTAGE DIFFERENTIAL INPUT VOLTAGE
4 4
VCC = 4.75 V VCC = 5.25 V
3.5 TA = 25°C 3.5 TA = 25°C

3 3
VO – Output Voltage – V

VO – Output Voltage – V

VIC = 0 VIC = 0
2.5 2.5
VIC = ± 7 V VIC = ± 7 V
2 2

ÁÁ ÁÁ
1.5 1.5
VIC = ± 7 V VIC = ± 7 V

ÁÁ ÁÁ
VO

VO

1 1
VIC = 0 VIC = 0
0.5 0.5

0 0
– 100 – 7 5 – 50 – 2 5 0 25 50 75 100 – 100 –7 5 – 50 – 2 5 0 25 50 75 100
VID – Differential Input Voltage – mV VID – Differential Input Voltage – mV

Figure 2 Figure 3

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 uA9639C
DUAL DIFFERENTIAL LINE RECEIVER
SLLS113C – OCTOBER 1986 – REVISED MARCH 1997

TYPICAL CHARACTERISTICS

HIGH-LEVEL OUTPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE

vs vs
HIGH-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT CURRENT
5
0.6
VCC = 5 V
VCC = 5 V
4.5 VID = 0.2 V
VID = – 0.2 V
TA = 25°C
VOH – High-Level Ouput Voltage – V

0.5 TA = 25°C

VOL– Low-Level Output Voltage – V

4

3.5
0.4
3

2.5 0.3

2
0.2
1.5

1
0.1
0.5

0 0
0 – 10 – 20 – 30 – 40 – 50 – 60 – 70 – 80 0 5 10 15 20 25 30 35 40
IOH – High-Level Output Current – mA IOL – Low-Level Output Current – mA
Figure 4 Figure 5

SUPPLY CURRENT
vs
SUPPLY VOLTAGE
100
No Load
90
Inputs Open
TA = 25°C
80
I CC – Supply Current – mA

70

60

50

40

30

20

10

0
0 1 2 3 4 5 6 7 8

VCC – Supply Voltage – V

Figure 6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5

uA9639C
DUAL DIFFERENTIAL LINE RECEIVER
SLLS113C – OCTOBER 1986 – REVISED MARCH 1997

APPLICATION INFORMATION
5V Twisted Pair 5V

1/2 uA9638C 1/2 uA9639C

5V

1/2 uA9639C

Figure 7. EIA/TIA-422-B System Applications

6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF

DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Copyright  1998, Texas Instruments Incorporated