Scribd
Upload
170 views

AJ 245 Technical Spesification

The document provides a technical specification for the Jet-245 water jet unit from Alamarin-Jet Oy. It can produce up to 235kW of power and has a maximum impeller diameter of 245mm. The unit weighs approximately 95kg and can be installed inside or outside of the boat hull. The specification highlights the unit's compact design, serviceability, performance characteristics, and lists several boat references that use Jet-245 units.

Uploaded by

Hernan B.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
170 views

AJ 245 Technical Spesification

The document provides a technical specification for the Jet-245 water jet unit from Alamarin-Jet Oy. It can produce up to 235kW of power and has a maximum impeller diameter of 245mm. The unit weighs approximately 95kg and can be installed inside or outside of the boat hull. The specification highlights the unit's compact design, serviceability, performance characteristics, and lists several boat references that use Jet-245 units.

Uploaded by

Hernan B.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

ALAMARIN-JET OY

Technical specification
Jet-245

Information provided in this presentation is


subject to change without prior notice.
Jet-245 basic data
Power max. 235kW/320hp
Rpm max. 4600 1/min
Vessel displacement max. ~3,5t/7700lb (single jet, planing)

Unit weight ~95kg/210lb


Maximum diameter of impeller 245mm/9.6”
Entrained water 32l/8.45gal

Materials Aluminum, high grade stainless steel, plastic


New revolutional installation
Combi-frame construction (patent pending) provides flexible installation options.
Unit can be either inside (short tail) or outside (long tail) of the boat hull.

1. ”Long tail” installation.

Inspection hatch outside


Maximum space inside the boat
New revolutional installation
2. ”Short tail” installation.

Inspection hatch inside


Minimum distance outside
New revolutional installation
Boat builder point of view

- Simple installation templates, planar surfaces

- Flexible boat layout design, GRP mould inserts easy to use

- One unit construction, no multiple stock


Technical advantages
- Minimum practical drive flange distance from the transom on shaft line ~70mm.
Technical advantages
Compact and cost effective design:

- Integrated steering cylinder.


- Rear bearing lubrication in the engine compartment
- Integrated reverse bucket hydraulic oil cooler.
Technical advantages
Serviceability and life cycle cost minimized:

- BIG inspection hatch.


- Stainless steel impeller.
- Conical stainless steel impeller wear ring can be replaced.
- Mechanical seal in front bearing housing.
- Needle roller bearing in rear end with long life time.
Performance
- High cavitation limits, bollard pull max. 800kg  amazing boat acceleration.
- High efficiency @ 30-45kn.
- Reverse pulling force 65% of forward thrust.
- Extremely good steering response due to special steering nozzle design.
References
HTech A25
Manufacturer: HT Engineering
Type: SAR-boat
Length: 7,95m
Beam: 2,85m
Displacement: 2,7t
Engine: 232kW@4000rpm, 1:1
Speed: 35kn
References
Stinger 760
Manufacturer: Harding
Type: Fast rescue boat
Length: 7,96m
Beam: 2,86m
Displacement: 2,9t
Engine: Steyr SE 306J38
215kW@3800rpm, 1:1
Speed: 35kn
References
Brude HD 720
Manufacturer: Survitec Norway AS
Type: Fast rescue boat
Length: 7,2m
Beam: 2,4m
Displacement: 2,1t
Engine: Steyr SE236E40
170kW@4000rpm, 1:1
Speed: 36kn
References
Flugga 7m
Manufacturer: Flugga boats
Type: Survey RIB
Length: 7m
Beam: 2,5m
Displacement: 2,1t
Engine: Steyr MO236K42
172kW@4200rpm, 1:1
Speed: 30kn
References
8,6m Catamaran
Manufacturer: Flugga boats
Type: Survey Catamaran
Length: 8,6
Beam: 2,9m
Displacement: 4,3t
Engine: Twin Steyr MO144M38
106kW@3800rpm, 1:1
Speed: 15kn
References
Norsafe Mako 655
Manufacturer: Norsafe AS
Type: Fast rescue boat
Length: 6,75m
Beam: 2,7m
Displacement: 2,2t
Engine: Steyr SE266E40
190kW@4000rpm, 1:1
Speed: 35,5kn

You might also like