Scribd
Upload
48 views1 page

Hydraulic Oil

This document provides specifications, compatibility information, and recommendations for Shell Tellus S2 M hydraulic fluids. It lists approvals from organizations like Denison Hydraulics and Fives Cincinnati. It also notes the fluids are compatible with most hydraulic pumps and other mineral oil-based fluids but should not mix with other fluid types. Health and safety information indicates the fluids could present hazards if misused and used oil should be collected not discharged into the environment.

Uploaded by

Nadeem Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

Hydraulic Oil

This document provides specifications, compatibility information, and recommendations for Shell Tellus S2 M hydraulic fluids. It lists approvals from organizations like Denison Hydraulics and Fives Cincinnati. It also notes the fluids are compatible with most hydraulic pumps and other mineral oil-based fluids but should not mix with other fluid types. Health and safety information indicates the fluids could present hazards if misused and used oil should be collected not discharged into the environment.

Uploaded by

Nadeem Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Specifications, Approvals & Recommendations Compatibility & Miscibility

· Denison Hydraulics (HF-0, HF-1, HF-2) · Compatibility

· Fives Cincinnati P-70 (ISO 46) Shell Tellus S2 M fluids are suitable for use with most

· Eaton Vickers (Brochure 694)


hydraulic pumps. However, please consult your Shell

· Bosch Rexroth RD 90220-01 (2011), ISO 22-100


Representative before using in pumps containing silver

·
plated components.

·
ISO 11158 (HM fluids)

ASTM D6158-05 (HM fluids)


· Fluid Compatibility
Shell Tellus S2 M fluids are compatible with most other

· DIN 51524 Part 2 HLP type mineral oil based hydraulic fluids. However, mineral oil

· Swedish Standard SS 15 54 34 AM hydraulic fluids should not be mixed with other fluid types

· GB 111181-1-94 (HM fluids)


(e.g. environmentally acceptable or fire resistant fluids).

For a full listing of equipment approvals and · Seal & Paint Compatibility
Shell Tellus S2 M fluids are compatible with seal materials
recommendations, please consult your local Shell
and paints normally specified for use with mineral oils.
Technical Helpdesk.

Typical Physical Characteristics

Properties Method Tellus S2 M 46


ISO Viscosity Grade ISO 3448 46

ISO Fluid Type HM

Kinematic Viscosity @0 C0
cSt ASTM D445 580

Kinematic Viscosity @40 C 0


cSt ASTM D445 46

Kinematic Viscosity @100 C 0


cSt ASTM D445 6.7

Viscosity Index ISO 2909 98

Density @15 C 0
kg/m 3 ISO 12185 879

Flash Point (COC) 0


C ISO 2592 230

Pour Point 0
C ISO 3016 -30

These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.

Health, Safety & Environment

· Health and Safety

Shell Tellus S2 M hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.

Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/

· Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Additional Information

· Advice
Advice on applications not covered here may be obtained from your Shell representative.

Page 2 of 3 Tellus S2 M 46, v 3.5 20.12.2016.09.57

You might also like