RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR

FACULTY OF SCIENCE & TECHNOLOGY

B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week: 3-1-0
Total Credit:4 Lecture (L): 3 Hrs Tutorial/Activity (T/A):1 Hrs. Practical (P): 0 Hrs.
Subject Code BTCVE701T Name of Subject: Design of Steel Structure
Examination Scheme
Internal Marks: University Minimum Passing Examination
Marks: Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 4 Hours
(15 Marks for Activity based)

Course Objective:
1 To understand the properties of various rolled and built-up sections.
2 To understand the possible failure modes of structural members.
3 Applying various checks for strength assessment and design the member.

Course Outcome
After completion of syllabus student shall be able to
1 Use the knowledge of structural properties in assessing its strength and understand
design philosophy.
2 Apply the knowledge of various techniques in analysing and design the members
subjected to axial loading.
3 Make use of knowledge of analysis in structural planning and design of various
components of building subjected to bending.
4 Apply engineering concept to design members subjected to complex nature of loading.
5 Make use of knowledge to design footings.
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Subject Code
&CO NO.
CO1 3 3 3 3 2 3 2 2 3

CO2 3 3 3 3 2 3 2 2 3
CO3 3 3 3 3 2 3 2 2 3
CO4 3 3 3 3 2 3 2 2 3
CO5 3 3 3 3 2 3 2 2 3
1 Low 2 Medium 3 High

SYLLABUS
Unit No.1: (Introduction to design philosophy and Structural fasteners)
Allotment of Mapped
Hours with CO
Details of Topic: Number
L T/A CO
Steel as a structural material and its properties, various rolled sections, 2 1

Introduction to plastic analysis: Shape factor, plastic hinge formation

and collapse mechanism for beams.
concept of Limit state design philosophy, Introduction to IS 800:2007
and steel table.
Types of joints and fasteners: Lap joint, Butt Joint with single and 2 1

double cover plate, packing plate. Efficiency of joint.

Types of Bolts, Ordinary and HSFG bolts, shearing, bearing and 2 1 1

ultimate tensile strength of bolts, prying force, Strength reduction

factors, Bolt strength.
Types of weld, size and effective throat, fillet and butt weld, 2 1 1

intermittent weld, weld strength.

8

Unit No.2 (Design of Axially Loaded Members)

Tension members: Yield and rupture strength of plate, chain and 4 1 2

staggered arrangement of fasteners, Block shear failure, shear lag effect

in angles. Lug angle.
Compression Members: Behaviour of slender compression member, 4 1 2

local and overall buckling, section classification, effect of initial out of

straightness, eccentricity and residual stresses, Elastic stability of
columns, Perry- Robertson approach and IS provisions. Design of
rolled I, angle and Chanel sections.
8

Unit No.3 (Design of Members subjected to Bending.)

Simple Beam: Elastic and plastic behaviour, flexural strength, Low and 2 3

high shear cases, deflection, web buckling and web crippling effect.
Laterally supported and unsupported beams. Design of rolled I section.
Design of Built up Beams and plated rolled beam. 2 1 3

Plate girder: Serviceability criterion, flexural and shear strength, 4 1 3

Simple post critical method and tension field theory, longitudinal and
transverse stiffeners, Design of welded plate girder. Curtailment of
plates.
8

Unit No.4 (Design of Members subjected to Combined Loading)

Members subjected to axial load and uniaxial or biaxial bending. 4 1 4

Design of Beam – Column.

Design of Built up Column, economical section, Single and double 4 1 4

lacing, battened columns.

8
Unit No.5 (Design of Column Bases)
Design of slab base, gusseted base and moment resistant bases. 4 1 5

References
Applicable Name of Book Name of Name of Edition Category
for Unit Author Publisher Text Research Reference
No. Book paper book
All Design of Steel N Sbramanian Oxford First Text
structures university press edition book
2008
All Fundamentals of M L Gambhir McGraw Hill First Text
Structural Steel Education ( edition book
Design India) Pvt ltd 2013
Design of Steel S Dhanpat Rai Second Reference
structures Ramamurtham publishijng edition book
Company 2014

Limit State V L Shah and Structures Second Reference

 Design of Steel S R Gore Publication edition2010 book
structures
5 Design of Steel S K Duggal Tata McGraw Text
structures book

List of Code/Handbook
Applicable Title of Code Type of Year of Publication
for Unit No. code
All Indian Standard For General Construction In Steel – 2007
Code of Practice
Steel Structural Handbook / Steel Table
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 03 Lecture (L): 00 Hrs. Tutorial/Activity (T/A): 0 Hrs. Practical (P): 06 Hrs.
Subject Code BTCVE706P Name of Subject: Project Work Phase-I
Examination Scheme
Internal Marks: University Marks: Minimum Passing Marks: Examination Duration:
50 Marks 50 Marks 50 Marks --

Course Objective
1 The objective of the course is to give awareness of practical application of various
theoretical concepts in the field of Civil Engineering.
2 The objective of Project Work Phase I is to enable the student to take up investigative
study in the broad field of Civil Engineering, either fully theoretical/practical or
involving both theoretical and practical work to be assigned by the Department on an
individual basis or minimum two/ maximum six students in a group, under the
guidance of Project Guide.

Course Outcome
After completion of syllabus student able to
1 Understand organizational skills & professional practices
2 Interpret the communication skills of organizational members with each other
3 Collection of data for analyze/design the Civil Engineering problem by using
appreciate methodology in a team work.
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

BECVE507P1 3 2 2 1
BECVE507P2 3 2 2 1
BECVE507P3 3 2 2 1
1 Low 2 Medium 3 High

SYLLABUS
Part A: INTERNSHIP
(25 Marks Internal and 25 Marks External)
After successful completion of internship of 3 to 4 weeks, students have to give internship
report.
Part B: SEMINAR
(25 Marks Internal and 25 Marks External)
A group of students is expected to take up a project from Civil Engineering field which
is to be started in Semester VII and to be completed in Semester VIII.
The project work may include,
- Experimental analysis / verification,
- Development of design methods and verification,
- Design and fabrication of a model for a civil engineering project,
- Design for civil engineering structures and preparation of working drawings,
- Developing a software for analysis and / or design of decision making in civil
engineeringand management practice
- Technical and / or economic feasibility study
- Study on new materials / methodology for construction
The students may be asked to work in groups with not more than Six students in each
group.
Basic study through review of literature on the topic selected shall be completed. The scope
of the project, necessary data, sources of such data etc. shall be identified. The group of
students has to prepare a brief report on the work done during the semester and is to be
submitted. The report should at least include Introduction, Aim and objective of the project,
scope of the project, methodology, and review of literature and reference list. The group shall
prepare and present a seminar based on this work.
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem:VII Total Hours Distribution per week 3-0-0
Total Credit:03 Lecture (L):- 03 Hrs Tutorial/Activity (T/A):- 00Hrs. Practical (P):00 Hrs.
Subject Code BTCVE702T Name of Subject: Advanced RCC Design (Elective-IV)

Internal Marks: University Marks: Minimum Examination

Passing Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 4 Hrs
(15 Marks for Activity based)

Course Objective
1 To understand the philosophies of design of reinforced cement concrete and to justify
this is the best
2 To know design of advanced structural elements with safety, stability and economical
way
3 To study of provisions in IS 1893 and IS 456 for design of structures

Course Outcome
After completion of syllabus student able to
1 Understand the conceptual design of overhead circular service reservoirs.
2 Analysis and design of Highway Bridge: Slab type and Girder type
3 Analyze and Design building frames using Limit state Method.
4 Select the parameters in beam theory for design cylindrical shells
5 Design Silos using Limit state Method.
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

Subject
Code
&CO NO.
CO1 3 3 3 - 2 - - 2 - 3 - 3
CO2 3 3 3 - 2 - - 2 - 3 - 3
CO3 3 3 3 - 2 - - 2 - 3 - 3
CO4 3 3 3 - 2 - - 2 - 3 - 3
CO5 3 3 3 - 2 - - 2 - 3 - 3
Avg CO 3 3 3 - 2 - - 2 - 3 - 3

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1
Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Design of overhead circular service reservoirs.(IS 3370-2021) 09 1
Analysis of staging by cantilever method. Analysis and design for
earthquake as per relevant IS codes.(IS 1893-Part-II-2014)
09

Unit No.2
Design of highway bridge with IRC loading and equivalent UDL Slab 09 2
type, Two/Three girder type (IRC-06-2017)
09
Unit No.3
Design of building frames up to two bay/two storey, including design 09 3
of foundation. Using Limit state Method
09
Unit No.4
Design of cylindrical shells by beam theory, advantages, assumptions, 09 4, 5
ranges of validity and beam analysis. Design of shells with or without
edge beam. Design of Silos. (Using Limit state Method)
09
 Dr. B. C. Punmia, Arun Kumar Jain, Ashok Kumar Jain, Comprehensive RCC
1.
Design, 8th Edition, Laxmi Publication Pvt. Ltd., 2005
Text
V. L. Shah, S. R. Karve, Illustrated Reinforced Concrete Design, 3rd Edition,
Books 2.
Structures Publication, 1996
3. Advanced Reinforced Concrete Design 3ED (PB 2016) Paperback – 1 January
2016 by RAJU N.K. (Author) ,ASIN : 8123929609 ,Publisher : CBS; 3rd
Revised edition (1 January 2016) ,ISBN-10 : 9788123929606
Design of Reinforced Masonry Structures, Second Edition, Narendra Taly,
1.
Ph.D., P.E., F.ASCE
EBooks Advanced Reinforced Concrete Design , by K. Raju (Author), ASIN :
2. B07NDD1BTZ , Publisher : CBS PUBLISHERS AND DISTRIBUTORS PVT
LTD; 3rd edition (30 March 2016)
Ashok K. Jain, Reinforced Concrete: Limit State Design, 4th Edition, Nem
1.
Reference Chand, 1993
Books T.R. Jagadeesh, M.A. Jayaram, Design of Bridge Structures, 2nd Edition, PHI
2.
Learning Pvt. Ltd., 2010
online TL 1. https://nptel.ac.in/courses/105/105/105105105/
Material 2. https://nptel.ac.in/courses/105/105/105105165/
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE &TECHNOLOGY
B.TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit: - 03 Lecture : 3 Hours Tutorial//Activity(T/A): Practical(P): 0Hrs
0Hrs
Subject Code BTCVE702T Subject: Advance Soil Engineering (Elective-
IV)
Examination Scheme

Minimum Passing Examination

Internal Marks- University Marks: Duration:
30 Marks
(l5marks. for sessional
70 Marks 45 Marks 3Hours
Examination)
(15 Marks for Activity based)

Course Objectives
To understand the physical of soil and its behavior under external loads and for
1 different site conditions.
2 To understand the Engineering properties of soil and its behavior under external
loads and for different site conditions.
3 To characterize stress-strain behavior of soils, the failure criteria and to evaluate
the shear strength and compressibility parameters of soils.
4 To understand the effective stress phenomenon in different types of soil.
5 To understand one dimensional and three dimensional consolidation
characteristics and secondary consolidation in clays.

Course Outcomes
After completion of syllabus, students would be able to
1 Estimate the amount of consolidation and settlement and time required for
settlement under a given load.
Understand the effects of seepage on the stability of structures and calculate
2 stresses that influence soil behavior.
3 Ability to analyze the stability of natural slopes safety and sustainability of the
slopes, design of retaining structures, reinforced earth wall, etc.
Understand basics principles of flow and soil permeability through porous media,
4 Construct flow nets for water flow calculations.
5 Design deep foundation systems under different loading and soil conditions.
 MAPPING OF CO WITH PO
COs PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 3 2 2 1 1 2 2 1 -- -- 2 2
CO2 3 2 1 1 -- -- 2 1 1 1 -- 2
CO3 3 2 2 2 1 2 -- 2 -- -- 1 1
CO4 3 2 1 1 1 2 2 1 -- 2 -- 2
CO5 3 2 2 2 2 -- -- 1 -- -- 2 2
Avg 3.0 2.0 1.6 1.4 1.0 2 2 1.2 1 1.5 2 1.8
1 Low 2 Medium 3 High

SYLLABUS

Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
UNIT NO.1 Consolidation
Compressibility and Consolidation: One dimensional compression,
Oedometer test, parameters – coefficient of volume change,
03 1
constrained modulus, compression index, swell or unloading,
maximum past consolidation stress, Over consolidation ratio.
Primary and secondary compression, consolidation – One, two and
three dimensional problems, Consolidation of partially saturated 03 1
soils, Creep/Secondary Compression in soils.
06
UNIT NO.2 Soil strength
Soil strength: Effective stress law for saturated and partially
saturated soil, pore pressure measurements in partially saturated 03 2
soils, effective stress concept, effect of intermediate principal stress.
Effect of rate of stress, stress dilatancy theory, plane strain and stress
02 2
path Hvorslov shear strength parameters.
05
UNIT NO.3 Earth pressure
Earth pressure – Rankine, Coulomb and Graphical Methods,
03 3
Retaining walls structures.
Gravity cantilever and counter fort retaining walls: Stability checks
02 3
and design.
05
 UNIT NO.4 Liquefaction of soils
Liquefaction mechanism, factors affecting liquefaction,
liquefaction of cohesionless soils and sensitive clays, liquefaction 03 4
susceptibility.
03
UNITNO.5 Machine Foundation
Introduction: Types of machines, Types of machine foundations,
Modes of vibrations, General requirements of machine foundation, 02 5
General criteria for design, permissible amplitude
Analysis & Design of Machine foundation: Elastic homogeneous
half space and lumped parameter solutions, analysis and design of 03 5
foundations for reciprocating and impact type machines, turbines,
effect of machine foundation on adjoining structures.
vibration isolation& control: Force isolation & motion isolation,
Methods of isolation in machine foundations Isolating materials
and their properties Bearing capacity of foundations: Introduction 03 5
to bearing capacity of dynamically loaded foundations
08

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit
Text Research Reference
No.
Book paper book
Principles of
Foundation Thomson
1,2,3,4,5 B. M Das Yes
Engineering Brooks/Cole

Foundation
McGraw-Hill
1,2,3,4,5 Analysis and J. E. Bowles Yes
Book Company
Design
Soil Lambe and
1,2,3,4,5 Wiley Yes
Mechanics Whitman
James K John Wiley &
1,2,3,4,5 Soil Behaviour Yes
Mitchel Sons Inc
Foundation of
Mc Graw Hill
1,2,3,4,5 theoretical soil M. E. Harr Yes
book co.
mechanics
Applicable
for Unit Web site address
No.
1,2,3,4,5 https://youtu.be/FEkndgIWK24
1,2,3,4,5 https://youtube.com/playlist?list=PL_ZYN7hwTiZL-FWFNAXC4F-
q3zj20XROb

List of Code/Handbook
Applicable Type of Year of
for Unit Title of Code
code Publication
No.
Indian Standard Code Of Practice For Design And IS : 2974 ( Part
Construction Of Machine Foundations. Indian I ) - 1982
5
Standard (Reaffirmed
2008)

1,2,3,4,5 Advanced Soil Mechanics Fifth Edition 2019

 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week

Total Credit:03 Lecture (L): 03 Tutorial/Activity : - 0 Hrs. Practical (P): - 0 Hrs.

Hrs.
Subject Code BTCVE702T Name of Subject: Sustainable Resource Management
(Elective IV)
Examination Scheme
Internal Marks: University Minimum Examination
Marks: Passing Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
1 Students should be able to get knowledge of natural resources and sustainability
2 Students should be able to learn about Land, Soil and Water resources
3 Students should be able to learn about the different available conventional and non
conventional energy resources
4 Students should be able to learn about various available forest and mineral resources
5 Students should be able to get knowledge of Natural Resource Conservation

Course Outcome
After completion of syllabus student able to
1 To be able to understand the various available natural resources with their objectives,
demand and Social dimensions related to the sustainability.
2 To be able to understand the various available land, soil and water resources with their
objectives, impacts, renewal and management
3 To be in a position to understand various Conventional and Non-renewable Energy
Resources
4 To be in a position to understand the forest and mineral resources
5 To be in a position to understand the Natural Resource Conservation system
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

Subject
Code &CO
NO.

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1 Natural resources & Sustainability
Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Introduction to natural resources, objectives, Types of natural resources 02
India-general information of climate, land and soil, water resources, 01
energy resources, agro climatic zones
List of natural resources, Values of natural resources and Demands of 01
Natural Resources 1
Sustainability- definition, importance, environmental, economical and 01
Social dimensions of sustainability
Global, Regional and Local environmental issues, Insecurity of 02
Resource Degradation, Climate Change
07
Unit No.2 Land, Soil and Water resources
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Introduction, objectives, Land resources, Land use pattern in India, 02
Impact of land resource management, Introduction of Waste Land
Soil- Soil Profile, Soil Classification, Soil Erosion and Soil 01
2
Degradation, Soil Conservation
Water Resources, Different water resources, Hydrological cycle and its 02
components
Classification of water resources, Use of Water Resources, 01
characteristics of water resources
Supply and Renewal of Water Resource, Water Resources and 01
Problems - The Indian Scenario
07
Unit No.3 Energy Resources
Details of Topic Allotment Mapped
of with CO
Hours Number
L T/A CO
Energy Resources- Introduction, Objectives and list of Conventional 01
and Non-renewable Energy Resources
Non-conventional forms of energy - Coal , petroleum , natural gas and 02
lignite, resources and reserves available in India
Renewable energy resources-Solar energy , Solar power; Wind energy, 01
3
wind farms
Geo-thermal energy ; Hydropower and micro-hydel power ; Tidal 01
energy; Ocean.
Thermal Energy Conversion(OTEC) Technology; Hydrogen as an 02
alternate fuel
07
Unit No.4 Forest and Mineral Resources
Allotment Mapped
of with CO
Details of Topic :
Hours Number
L T/A CO
Introduction to forest Resources, Forest vegetation, status and 01
distribution, contribution as resource
Use and over-exploitation, deforestation. Timber extraction, mining, 02
dams and their effects on forest and tribal people
4
Forest products, Developing and developed world strategies for forestry 01
Mineral Resources- Origin of Mineral Resources, Mineral Resource 02
Abundance and Distribution
The Formation of Minerals, Locating and Extracting Mineral Resources 01
07
Unit No.5 Natural Resource Conservation
Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Conservation- Introduction, Objectives, Overexploitation of Natural 01
Resources
Degradation and Depletion of Natural Resources, Land Degradation 02
Deforestation, Soil Erosion 5

Water Pollution, Air Pollution, Need for Conservation 01

Key Issues in Natural Resource Management, Land Reclamation 01

Conservation of Water Resources, Energy Conservation 02
07

References
Applicable Name of Book Name of Author Name of Edition Category
for Unit
Publisher Text Research Reference
No.
Book paper book
Ecology of Francois John Wiley & 1984 Text
Natural Ramade Sons Ltd. book
Resources.
Managing Harikesh N. PHI Lerning 2014 Text
Natural Mishra Publication. book
Resources-
Focus on Land
and Water.

Renewable Tiwari, G.N. Narosa 2005 Text

Energy and M. K. Publishing. Book
Resources: Ghosal.
Basic
Principles
and
Application,
Energy & Edward H. Wesley 1976 Text
Environment: Thorndike Publishing Book
A Primer for Company,
Scientists and Reading.
Engineers,
Addition-
Trees and West, P.W. Springer 2004 Text
Forest Publication Book
Management.
Tropical Forest Montagnini, Springer 2007 Text
Ecology: The Florencia, Publication Book
Basis for Jordan, Carl F.
Conservation
and
Management.
A New Knight, Island Press. 1995 Text
Century for Richard L. Book
Natural
Resources
Management.
Water Dr. R.M. Book Rivers 2022 Text
treatment and Dhoble, Publication Book
Air pollution Dr. R.N.Patil, ISBN: 978-93-
Dr. A. M. 5515-327-2
Bhamburkar
Integrated Heathcote, Principles and 1988 Reference
Watershed I.W. Practice.John book
Management: Wiley.
 Forest Ecology James P. Pearson 2006 Reference
Kimmins Publication. Book
Forest Larr, Anthonie Springer 2007 Reference
Mensuration Van, Publication Book
AkcaAlparslan

List of Code/Handbook
Applicable Title of Code Type of Year of Publication
for Unit No. code
Handbook of Natural Resource and Energy 1993
Economics Volume-3
The Handbook of Natural Resources, CRC Press; 2020
2nd edition (10 June 2020)
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 3 Lecture (L): 3Hrs Tutorial/Activity (T/A): 0 Hrs. Practical (P): 0 Hrs.
Subject Code BTCVE702T Name of Subject: Building Construction Practices
(Elective – IV)
Examination Scheme
Internal Marks: University Marks: Minimum Passing Examination
Marks: Duration:
30 Marks
(15marks for sessional Examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
1 Familiarize Students with types of Construction, Building components & Building code
2 Familiarize Students with Building foundations, specification and related activities
3 Familiarize Students with Construction of sub structure related work & activities
4 Familiarize Students with Construction of super structure related work & activities
5 Understand procedure to carryout building maintainance

Course Outcome
After completion of syllabus student able to
1 Explain classification of Building as per NBC and building component & its function

2 Explain different types of foundations & related activities as per requirement

3. Carryout construction of sub structure as per conditions & requirement

4. Carryout construction of super structure as per conditions & requirement

5. Carryout building maintenance work as per conditions & requirement

 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

Subject
Code &CO
NO.

1 2 2 3 2 1 2 3
2 2 2 3 2 2 2 2 2 2 2 2

3 2 2 2 2 2 2 2 2 1 3 3

4 2 2 2 2 2 2 2 2 1 3 3
5 3 2 2 2 2 2 2 2 1 2 3
1 Low 2 Medium 3 High

SYLLABUS
Unit No.1 Overview of Building components
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Classification of Buildings
As per National Building Code-Part III (2005) Group A to 1 Latest code may
be referred. 03 1
As per Types of Constructions-Load Bearing Structure, Framed Structure,
Composite Structure.
Building Components
Building Components and their function.
Substructure – Foundation, Plinth and Plinth Filling. 04 1
Superstructure – Walls, Partition wall, cavity wall, Sill, Lintel, Doors and
Windows, Floor, Mezzanine floor, Roof, Columns, Beams, Parapet.
07
Unit No.2 Building Foundation & Specification
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Building foundations – basements – temporary shed – centering and
shuttering – slip forms – scaffoldings – de-shuttering forms – Fabrication and
04 2
erection of steel trusses – frames – braced domes – laying brick – roof
finishes – acoustic and fire protection;
Specifications, details and sequence of activities and construction co-
03 2
ordination – Site Clearance – Marking – Earthwork ,concrete hollow block
masonry – flooring – damp proof courses – construction joints – movement
and expansion joints – pre cast pavements
07

Unit No.3 Construction of Sub Structure

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Sub Structure Construction- Techniques of Box jacking – Pipe Jacking -under
water construction of diaphragm walls and basement 02 3

Tunnelling techniques – Piling techniques - well and caisson - sinking

cofferdam 02 3

cable anchoring and grouting-driving diaphragm walls, sheet piles - shoring

for deep cutting - well points -Dewatering and stand by Plant equipment for 03 3
underground open excavation

07

Unit No.4 Construction of Super Structure

Allotment Mapped
of
Details of Topic with CO
Hours
Number
L T/A CO
Super Structure Construction- Launching girders, bridge decks, off shore
02 4
platforms –
special forms for shells - techniques for heavy decks – in-situ pre-stressing in
02 4
high rise structures,
Material handling - erecting light weight components on tall structures -
03 4
Support structure for heavy Equipment and conveyors –
Erection of articulated structures, braced domes and space decks; Prerequisite: 02 4
7

Unit No.5 Building Maintenance

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Cracks : Causes and Types of Cracks, Identification and Repair of Cracks.
02 5
Grouting and Guniting.
Settlement of Foundation: Types, Causes and Remedial measures. 02 5
Demolition: Necessity, Method of Demolition- Hand Demolition, Machine 02 5
Demolition, Controlled Blasting. Demolition Implosion, Precautions During
Demolition.
Water Proofing: Necessity and importance, material used for Water Proofing,
Non-conventional method of water proofing introduction of crystalline
waterproofing, cement base polymer coatings, conventional waterproofing
02 5
methods-brick bat coba waterproofing, Box type water proofing,
Injection/grouting. Plinth Protection necessity and material used, Damp Proof
Course.
08

References
Applicable Name of Name of Author Name of Edition Category
for Unit Book Publisher Text Research Reference

No. Book paper book

National
1 Building BIS New Delhi yes
Code

BIS 962-1989
1 to 2 Code of
Architectural BIS New Delhi yes

and Building
Drawing
BIS 1038-
3 1983 Steel
Doors. BIS New Delhi yes
Windows and
Ventilators
BIS
Building
2 to 5 Construction S. P. Arora Dhanpat Rai yes
Publishing Co
Pvt Ltd
Building
2 to 5 Construction S. C. Rangwala 25th yes
List of Code/Handbook
Applicable Title of Code Type of code Year of
for Unit No. Publication
1 to 5 PWD Handbooks for Materials, Masonry. Building, (AICTE)
Plastering and Pointing
1 to 5 Practical Civil Engineering Handbook Khanna
Publication
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 03 Lecture (L): 3 Hrs Tutorial/Activity (T/A): 0 Hrs. Practical (P): 0 Hrs.
Subject Code BTCVE702T Name of Subject: Design of Hydraulic Structures
(Elective-IV)
Examination Scheme
Internal Marks: University Marks: Minimum Examination
Passing Marks: Duration:
30 Marks
(15marks for sessional Examination) 70 Marks 45 Marks 3 Hours

(15 Marks for Activity based)

Course Objective
1 To study the fundamental concept , design and maintenance of hydraulic structures
2 To get a knowledge of various types of dam
3 Study of canal regulation, canal headwork and cross-drainage.
4 Study of design of spillway and energy dissipaters
5 To develop understanding of the basic principles and concepts of analysis and design
of hydraulic structures.

Course Outcome
After completion of syllabus student able to
1 Understanding the design of dam section and its usefullness.
2 To know the types of canal, canal headworks, cross-drainage and canal regulator works
3 Application of the canal, dam and spillway in civil engineering structures.
4 Be able to select the type of storage works, analysis, design of various components part
of diversion head works.
5 To know the concept, analysis, design and field application of various anal structures.
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

BECVE702 3 3 3 2 2
T CO1

BECVE702 3 3 3 3 2 2
T CO2

BECVE702 3 3 3 2 2 2 1
T CO3

BECVE702 3 3 3 2 3 1
T CO4

BECVE702 3 3 3 2 3 1
T CO5

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1 Reservoir Planning & Earthen Dam
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
02 1

Reservoir Planning: Investigations, Capacities, Zones of storage,

Mass Inflow and Mass Demand curves, Life of Reservoir, River
training work
Earthen Dam: Nature and classification of soil, Types, causes of 05

failure and design criteria, Description of component part of earthen

dams foundation, construction methods, foundation requirements,
typical earth dam sections, seepage through body of earthen dam and
drainage arrangements, seepage control, Phreatic line in earth dam,
Stability of foundation against shear
07

Unit No.2 Gravity Dam

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Gravity dams: Defination, selection of site, Design Criteria, forces 07 2
acting on gravity dams, Theoretical & practical profile of gravity dam,
low and high gravity dams, stability analysis, , evaluation of profile by
method of zoning, foundation treatment, construction joints, galleries in
gravity dams.

07

Unit No.3 Spillway & Energy Dissipaters

Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Spillways : Necessity, components and classification, Estimation of 03 3

spillway design flood,design principle, cavitation on spillway, Ogee

spillway and its design, design of outlets and rating curves, emergency
spillways
Energy Dissipators: Principle, Tail water and Jump height curve, 04 3

spillway gates and their design principles, Design of canal regulating

structures, Design criteria for Channel transitions, Hind‘s method for
design of transition, Design of Sarda type Falls, Design of pucca canal
trough.

07

Unit No.4 Structures on Pervious formations

Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
07 4
Bligh’s creep theory and limitations, Khoslas’s theory of independent
variable,Khosla’s corrections, design of surface and subsurface weirs,
Barrages :design of waterways and crest levels,design of impervious
floors and protection works.
07
Unit No.5 Canal Structures
Allotment Mapped
of with CO
Details of Topic
Hours Number
 L T/A CO
09 5
Canal outlets-Review of requirements and types-modular, semi
modular, non-modular outlets- design of direct sluice
Design of Cross drainage works : Necessity,types of cross drainage
works, selection of suitable type of cross drainage works, types of
aqueducts, design of aqueduct, syphon,super passage and canal syphon
Design of Regulator: Head regulator and cross regulator
09

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit
Text Research Reference
No.
Book paper book
Irrigation Santosh khanna √
Engineering Kumar Garg publication
and
Hydraulic
Structures
Irrigation B. C. Punmia laxmi √
Engineering publication
and Water
Power
Engineering
√

Creager, Justin
Engineering & Hinds
for Dams
(Volumes I, II
& III)

Varshney
Hydraulic
Structures
 Theory & Varshney R.S. √
Design of
Irrig.
Structures
Water Sathyanarayana Wiley Eastern √
Resources Murthy
Engineering
P. Novak √
Hydraulic
Unwin Hyman,
Structures London

List of Code/Handbook
Applicable Title of Code Type of code Year of
for Unit No. Publication
Criteria for design of storage gravity dams IS: 6512 1984
(1984)
Design of cross drainage works – Code of IS 7784 (Part 1995
Practice I (1993), Part
II Section 1 to
5 (1995))
Hydraulic design of barrages and weirs – IS: 6966 Part 1989
Guidelines I (1989)
Criteria for structural design of barrages and weirs IS: 11130 1984
(1984)
Criteria for design of canal head regulator IS:6531 1972
(1972)
Criteria for hydraulic design of cross regulator for IS:7114(1973) 1973
canal
General requirement of canal outlets IS:12331
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 3 Lecture (L): 3Hrs Tutorial/Activity(T/A): 0 hrs. Practical (P): 0 Hrs.
Name of Subject: Advanced Traffic Engineering&
Subject Code BTCVE702T
Management ( Elective-IV)
Examination Scheme
University Minimum Passing Examination
Internal Marks:
Marks: Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
To introduce the students with the principles and practice of transportation engineering
1
which focuses on traffic and transportation engineering and highway engineering.
To enable the students to have a strong analytical and practical knowledge of planning,
2
designing and solving the transportation problems.
To introduce the recent advancements in the field of sustainable urban development,
traffic engineering and management, systems dynamics approach to transport planning,
3
highway design and construction, economic and environment evaluation of transport
projects.
To strength the student knowledge and technical knowhow to be efficient transport
4
engineers.

Course Outcome
After completion of syllabus student able to
Students should be able to Define and describe various traffic studies and traffic
1
characteristics
Students should be able to describe terms related to highway capacity and have
2 knowledge of
statistical tools in traffic engineering
3 Students should be able to explain various theories related to traffic flow
 MAPPING OF CO WITH PO
PO PO PO PO PO PO PO PO PO PO PO1 PO
CO/PO
1 2 3 4 5 6 7 8 9 10 11 12
Subject
Code
&CO
CO1 2 2
CO2 3 2
CO3 2 1 2
CO4 3 3 1
CO5 3 2 2
1 Low 2 Medium 3 High

SYLLABUS
Unit No.1 Traffic Studies & Forecast
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Traffic studies 1
Methods of traffic forecast 1
Demand relationships
08
Design hourly volume
Price-volume
Critical hour concept 1
08
Unit No.2 Highway Capacity
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Capacity studies 2
Factors affecting capacity, 2
Level of service
08
Intersections
Mixed traffic flow 2
Case studies 2
08
Unit No.3 Accident Analysis
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Accidents analysis 08 3
Methods of representing accident rate
Factors in traffic accidents 3
Traffic safety 3
Accident coefficients
Driver strains due to roadway and traffic conditions 3
08
Unit No.4 Traffic Design
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Intersections
Interchanges 4
Designs of Signals
08
Traffic Rotary
Design of Parking lot
Parking Study
08
Unit No.5
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Traffic Events: Statistical Method For Interpretation 5
Regression
Application Of Binomial
08
Normal And Poisson's Distributions 5
Continuous Distribution Of Traffic Flow 5
Chi-Square & 'T'test. 5

References
Applicable Category
Name of Name of Name of
for Unit Edition Text Research Reference
Book Author Publisher
No. Book paper book
Transport
I,II,III, planning and CA Butterworth
I - - 
IV&V Traffic O'Flaherty Heinemann
Engineering
Introduction Tata
I,II,III, to James H McGraw
I - - 
IV&V Transportation Bank Hill
Engineering Publications
Transportation
Engineering C. Jotin PHI
III I - - 
an Khisty Publication
Introduction
 Khanna
I,II,III, Highway S.K. and Nem Chand
1991  - -
IV&V Engineering Justo & Bros
C.E.G
Traffic
engineering
I,II,III, L.R. Khanna
and 1987  - -
IV&V Kadiyali Publications
transportation
planning
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week: 3-1-0
Total Credit:4 Lecture (L): 3 Hrs Tutorial/Activity (T/A):1 Hrs. Practical (P): 0 Hrs.
Subject Code BTCVE703T Name of Subject: Advance Steel Design (Elective – V )
Examination Scheme
Internal Marks: University Minimum Passing Examination
Marks: Marks: Duration:
30 Marks 70 Marks 45 Marks 4 Hours
(15 Marks for sessional examination)
(15 Marks for Activity based)

Course Objective
1 Analyse the forces and stresses acting on different steel structures.
2 To understand the possible failure modes of structural members.
3 Applying various checks for strength assessment and design the member.

Course Outcome:
After completion of syllabus student shall be able to
1 Analyse loads acting on bridge and design of members.
2 Analyse industrial building members and their design.
3 Analyse forces acting on steel chimney and design of chimney superstructure.
4 Analyse loads acting on liquid storing tanks and their design.
5 Analyse loads actin on storage vessels and their design.
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Subject Code
&CO NO.
CO1 3 3 2 3 2 2 2 2 3
CO2 3 3 2 3 2 2 2 2 3
CO3 3 3 2 3 2 2 2 2 3
CO4 3 3 2 3 2 2 2 2 3
CO5 3 3 2 3 3 2 2 2 3
1 Low 2 Medium 3 High

SYLLABUS
Unit No :1Design of Bridges
Allotment Mapped
Details of Topic: of with CO
Hours Number
L T/A CO
Highway Bridge: 5 1 1
Types of Bridges, IRC loadings, Economic span length, Impact factor,
Design of deck and through type plate girder bridge.
Foot over Bridge: 1 1
Loading, types of decks. Design of trussed bridge 3 1
9 2
Unit No: 2 : Design of Industrial Buildings
Industrial sheds, Types & Design of mill bents, bracings. Design of 5 1 2
crane and gantry girder.
Introduction to Pre Engineered Building 1
Moment resisting welded and bolted connections. 3 1
9 2
Unit No.:3Design of steel Chimney
Types of chimney, chimney plates, linings, Breech opening, Forces 6 1 3
acting on steel chimney. Design of self-supporting steel chimney.
6 1
Unit No:4Design of Liquid storage steel tanks
Types of steel tanks, forces acting on elevated tanks, staging, wind 7 1 4
bracings. Design of rectangular, circular and pressed steel tanks.
Design of staging. 2
9 1
Unit No.:5: Design of storage vessels
Design of bunkers, silos and storage bins. 8 1 5
8 1

References
Applicable Name of Book Name of Author Name of Edition Category
for Unit Publisher Text Research Reference
No. Book paper book
All Design of Steel N Sbramanian Oxford First Text
structures university edition book
press 2008
All Fundamentals of M L Gambhir McGraw Hill First Text
Structural Steel Education ( edition book
Design India) Pvt ltd 2013
Design of Steel S Ramamurtham Dhanpat Rai Second Reference
structures publishijng edition book
Company 2014
Design of Steel Ram Chandra Standard Book Seventh Reference
structures- House, Delhi Edition book
Volume II 1991
5 Design of Steel S K Duggal TataMcGraw Text
structures book

List of Code/Handbook
Applicable Title of Code Type of Year of Publication
for Unit No. code
All Indian Standard For General Construction In Steel – 2007
Code of Practice
Steel Structural Handbook / Steel Table
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE &TECHNOLOGY
B.TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit: - 03 Lecture : 3 Tutorial//Activity(T/A): 0Hrs Practical(P): 0 Hrs
Hours
Subject Code BTCVE703T Subject: - Advance Foundation Engineering (Elective-v)
Examination Scheme

Minimum Passing
Internal Marks- University Marks: Examination Duration:
30 Marks
(l5marks. for sessional
Examination) 70 Marks 45 Marks 3Hours
(15 Marks for Activity
based)

Course Objectives
1 Design a shallow foundation subjected to eccentric & inclined loads.
Design of deep foundation i.e., piles based on settlement & bearing capacity
2 criteria
3 To impart importance of raft foundation.
4 Narrate the importance of apparent earth pressure diagrams in design of sheet
piles & braced cuts.
5 Design of foundations in Expansive soils.

Course Outcomes
After completion of syllabus, students would be able to
1 Analyze the bearing capacity of shallow foundations;
2 Analyse and design pile foundations.
Evaluate the importance of raft foundation and principles of design for buildings
3 and tower structures
4 Analyse and design Sheet piles and cofferdams.
Students should be able to understand the concept of foundations in expansive
5 soils.
 MAPPING OF CO WITH PO
COs PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 3 2 2 2 1 1 2 1 -- -- 2 2
CO2 3 2 1 1 -- -- 2 1 1 1 -- --
CO3 2 2 2 2 1 2 -- 2 -- -- -- 1
CO4 3 2 1 1 1 2 2 2 1 1 -- 2
CO5 3 2 2 2 2 -- -- 1 -- -- 2 2
Avg 2.8 2.0 1.6 1.6 1.25 1.67 2 1.4 1 1 2 1.75
1 Low 2 Medium 3 High

SYLLABUS

Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
UNIT NO.1 Shallow Foundation
Shallow Foundation: Terzaghi's bearing capacity equation, General
bearing capacity equation, different bearing capacity theories, I.S.
03 1
Code method, Effect of foundation shape, eccentricity and
inclination of load,
Influence of soil compressibility and water table, Footing pressure
for settlement on sand, Soil pressure at a depth, Boussinesq's & 03 1
Westergaard methods.
06
UNIT NO.2 Deep foundations
Deep foundations : Pile foundation-types, methods of installation,
codal practices for permissible load under vertical and lateral loads,
03 2
stresses during pile driving, load carrying capacity of pile groups,
negative skin friction, under-reamed piles.
Foundation for heavy structures, well foundations, caisson
foundations, equipment used for construction of these foundation 02 2
systems.
05
UNIT NO.3 Raft Foundation
Raft Foundation: Settlement and Bearing Capacity analysis, Analysis 03 3
of flexible and rigid raft as per IS 2950.
03
 UNIT NO.4 Sheet piles & Cofferdams
Cantilever sheet piles and anchored bulkheads: Earth pressure
diagram, determination of depth of embedment in sands and clays, 03 4
timbering of trenches, Earth pressure diagrams, forces in struts.
Cofferdams: Stability, bearing capacity, settlements (qualitative
treatment only, no designs). 02 4

05
UNIT NO.5 Expansive soils
Foundations in Expansive soils – problems in Expansive soils –
Mechanism of swelling –swell pressure and swelling potential –
Heave – foundation practices – Sand cushion – CNS 04 5
techniqueunder–reamed pile Foundations – Granular pile – anchor
technique, stabilization of expansive soils.
4

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit
Text Research Reference
No.
Book paper book
Principles of
Foundation Thomson
1,2,3,4,5 B. M Das Yes
Engineering Brooks/Cole

Foundation
McGraw-Hill
1,2,3,4,5 Analysis and J. E. Bowles Yes
Book Company
Design
Soil Lambe and
1,2,3,4,5 Wiley Yes
Mechanics Whitman
James K John Wiley &
1,2,3,4,5 Soil Behaviour Yes
Mitchel Sons Inc
Foundation of
Mc Graw Hill
1,2,3,4,5 theoretical soil M. E. Harr Yes
book co.
mechanics
Applicable
for Unit Web site address
No.
1,2,3,4,5 https://youtu.be/lsYFtwwlHIw
1,2,3,4,5 https://youtu.be/RmE4fgElekA

List of Code/Handbook
Applicable Type of Year of
for Unit Title of Code
code Publication
No.
Indian Standard Criteria For Design Of Diversion Indian
4 December 1982
Works, Part I, Coffer Dams. Standard

Indian Standard Methods Of Test For Soils, Part

5 Fifth Edition May 1978
Xli, Measurement Of Swelling Pressure Of Soils,
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit: 3 Lecture (L): 03 Tutorial/Activity (T/A): 0 Hrs. Practical (P): 0 Hrs.
Hrs
Subject Code BTCVE703T Name of Subject: Air Pollution & Solid Waste
Management (Elective-V)
Examination Scheme
Internal Marks: Marks: Minimum Examination
Passing Marks: Duration:
30 Marks

(15 Marks for sessional examination)

70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objectives:
1. The course will provide students knowledge regarding different aspects of air pollutants, its
sources and effects, meteorological parameters, air sampling
2. The course will prepare students to design equipments for air pollution to reduce its impact
on environment
3 The course will provide students the knowledge regarding problems arriving in handling
large amount of solid waste generated, its collection, transportation, and processing
4 The course will prepare students to learn emerging technologies for air pollution control,
design safe collection and disposal methods.

Course Outcomes:
1. Students will be able to understand different aspects of air pollutants, its sources and effects
on man & materials and Meteorological parameters
2. Students will be able to understand methods of air sampling & design equipments for air
pollution to reduce its impact on environment
3 Students will be able to understand problems arriving in handling large amount of solid
waste generated
4 Students will be able to understand problems arriving in its collection, transportation, and
processing & to design safe collection and disposal methods
5 Students will be able to learn emerging technologies for air pollution control.
 MAPPING OF CO WITH PO
CO/PO PO01 PO02 PO03 PO04 PO05 PO06 PO07 PO08 PO09 PO10 PO11 PO12
CO1 1 2 2 3
CO2 1 3 2 3 2 1
CO3 2 3 3 1
CO4 1 3 3 1
CO5 3 3 3 1
1. Low 2. Medium 3. High

UNIT-I (07 Hrs.)

Introduction to air pollution: Definition, atmosphere & its zones, Classification and sources of air
pollutants, Impacts of air pollution on human health, vegetation, animals, building materials,
structures, and atmosphere, soil and water bodies, Global and regional environmental issues of air
pollution: Ozone depletion, Climate change, Global warming, Acid rain.
Meteorological parameters: Primary and secondary parameters, atmospheric stability, plume
behaviour. Wind rose diagram, Air Quality Index (AQI), Standards for air pollution (as per Indian
Standards and CPHEEO),
UNIT-II (08 Hrs.)
Air sampling and measurement: Ambient air sampling and stack sampling, collection of
particulate and gaseous pollutants, (adsorption, absorption, incineration, condensation), site
selection criteria, methods of estimation. Stack height determination
Air pollution controls methods and equipments: Principles of control methods for particulates
and gaseous pollutants, gravity settlers, electrostatic precipitators, bag filters, cyclones and wet
scrubbers
UNIT-III (07 Hrs)
Introduction to solid waste management(SWM): Structure , necessity and responsibility,
Sources, Quantity and quality, Sources of solid waste, classification and components, physical and
chemical characteristics, per capita contribution, sampling and analysis

Collection and transportation of solid waste: Method of collection, equipment used for collection
and transportation, transfer stations, optimization of transport route.

UNIT-IV (07 Hrs)

Solid waste processing: Methods of processing, merits and demerits of various methods, 3R
concept

Disposal methods: Composting of waste, methods of composting, factors affecting composting

Sanitary land filling: Site requirements, methods, leachate management

UNIT –V (07 Hrs)

Incineration: Principles of incineration, types of incinerators, advantages and disadvantages,
Pyrolysis, Gasification, Refuse derived fuel(RDF), Biogas

Control of gases: Carbon Footprint, Emerging technologies and strategies to mitigate air pollution,
Current challenges and way forward
REFERENCE BOOKS:
1. M.N. Rao & H.V.N.Rao, “ Air Pollution”, Tata McGraw Hill Publishing Co. Ltd.
2. C.S.Rao, “Environmental Pollution Control Engineering”, Wiley Estern Ltd. New Delhi.
3. Gurjar, B.R., Molina, L., Ojha, C.S.P. (Eds.), “Air Pollution: Health and Environmental Impacts”,
CRC Press. 2010.
4. A. D. Bhide, & Sunderesan B.B., “Solid Waste Management in developing countries, INSDOC, N.
Delhi
5. Treatment and Disposal of Solid and Hazardous Wastes Kindle Edition by Debashish
Sengupta, Brajesh K. Dubey, Sudha Goel
6. Solid and Hazardous Waste Management, Second Edition by M. N. Rao
7. Municipal Solid Waste Management by P Jayarama Reddy
8. Municipal solid waste management rules Handbook
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 03 Lecture (L): 3Hrs Tutorial/Activity (T/A): 0 Hrs Practical (P): 0 Hrs
Subject Code BTCVE703T Name of Subject: Precast and Modular Construction
Practices (Elective-V)
Examination Scheme
Internal Marks: University Marks: Minimum Passing Examination
Marks: Duration:
30 Marks 70 Marks 45 Marks 3 Hours
(15marks for sessional Examination)
(15 Marks for Activity based)

Course Objective
1 To understand the design principles related to prefabrication elements.
2 To obtain knowledge on the concepts of production, transportation, assembling &
erection of precast buildings
3 To understand behaviour of structural components and joints.
4 To obtain knowledge of different equipment of precast construction practices.
5 To study different loads on the structural components.

Course Outcome
After completion of syllabus student able to
1. Give knowledge of factors to be considered in the design of prestressed concrete
structures
2. Give knowledge of the design and manufacturing of Finnish precast concrete products
3. Understand the difference between pre‐ and post‐tensioned systems for structural
behaviour
4. Learn to consider specific features of precast concrete structures: connections, stability
and prevention of progressive collapse, ductility
5. Learn to consider the influence of time‐dependency of materials on structural
reliability.
 MAPPING OF CO WITH PO
CO/PO PO PO2 PO PO PO PO PO PO8 PO PO10 PO1 PO1
1 3 4 5 6 7 9 1 2
2 3 2 - - 1 1 1 1 - - 2
1

2 2 2 2 - 1 1 1 1 1 2 2
2

3 3 2 2 1 1 1 1 2 1 1 2
3

3 3 2 1 - 1 1 - - 2
4

1 2 2 - - - - - - - 2
5

2.2 2.6 2.0 1.00 0.2 0.8 0.8 0.75 1 0.5 0.75 2.00
Avg 0

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
History of Precast Concrete, Materials, Typical framing, Standard 05 1
components, Structural behaviour of precast structures - Specific
requirements for planning and layout of prefabrication plant - IS Code
specifications.
economy of prefabrication, modular coordination, standardization – 03 1
Materials – Modular coordination – Systems – Production –
Transportation – Erection.
08

Unit No.2
Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Application of prestressing of roof members; floor systems two-way 2
load bearing slabs, pre-stressed beam, Precast column -precast shear
07
walls, Wall panels, hipped plate and shell structures.

07
 Unit No.3
Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Behaviour of structural components – Large panel constructions – 03 3
Construction of roof and floor slabs – Wall panels – Columns – Shear
walls.
Joints - Joints for different structural connections, effective sealing of 05 3
joints for water proofing, provisions for non-structural fastenings,
expansion joints in precast construction.
08
Unit No.4
Details of Topic Allotment Mapped
of
with CO
Hours
Number
L T/A CO
Production Technology - Choice of production setup, manufacturing 07 4
methods, stationary and mobile production, planning of production
setup, storage of precast elements, dimensional tolerances, acceleration
of concrete hardening. Hoisting Technology - Equipment for hoisting
and erection, techniques for erection of different types of members like
beams, slabs, wall panels and columns, vacuum lifting pads.
07
Unit No.5
Allotment Mapped
of with CO
Details of Topic
Hours Number
L T/A CO
Progressive collapse – Code provisions – Equivalent design loads for 07 5
considering abnormal effects such as earthquakes, cyclones, etc., -
Importance of avoidance of progressive collapse.
07

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit No.
Text Research Reference
Book paper book
1 Composite steel and P.R Knowels, Butterworth,
concrete
London. 1971
Construction.
2 Knowledge based Gerostiza C.Z., Academic Press
process planning for
Hendrikson C. Inc., 1994
construction and
manufacturing. and Rehat D.R.,

3,4 Text Book of Precast KimS. Elliot CRC Press

Concrete Structures
(2017)
 Composite Structures R.P.Johnson & Granada
Publishing LTd.
of steel and concrete R.J.buckby
1979.

Precast Concrete A.M.Hass Applied Science

Publishers
Design and
London 1983.
Application
Plan Cast Precast and Devid Mcgraw Hill
Publication Co.
Prestressed A.Sheppard &
1989.
concrete(A Design William R.
Guide ) Phillps
Manual of precast Koncz T Bauverlag,
concrete construction, GMBH, 1971.
Vols. I, II and III,
5 Structural design Betor Verlag 1978.
manual, Precast
concrete connection
details, Society for
the studies in the use
of precast concrete,
Netherland,
Prefabricated Mokk. L, Publishing
Concrete for (1964), House of the
Industrial and Public Hungarian
Structures Academy of
Sciences,
Budapest.
Prefab Architecture: Ryan E. Smith, John Wiley and
A Guide to Modular
(2010), Sons, London.
Design and
Construction,

Precast Concrete Hubert Wiley VCH.

Structures,
Bachmann and
Alfred Steinle,
(2011),
 List of Code/Handbook
Applicable Title of Code Type of code Year of Publication
for Unit No.
Handbook of Precast Concrete Buildings 2016
(2016) ICI publications.

CBRI, Building materials and 1990

components, India, 1990
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 03 Lecture (L): 3 Hrs. Tutorial/Activity (T/A): 0 Hrs. Practical (P): 0 Hrs.
Subject Code BTCVE703T Name of Subject: Hydropower Engineering (Elective-V)
Examination Scheme
Internal Marks: University Marks: Minimum Passing Examination
Marks: Duration:
30 Marks
(15marks for sessional Examination) 70 Marks 45 Marks 3 Hours

(15 Marks for Activity based)

Course Objective
1 To impart the knowledge for understanding of various aspects of
hydropower development
2 Demonstrate the ability to apply knowledge of mathematics, statistics, fluid mechanics,
in design of penstocks, surge tanks and intakes
3 Understand the design of hydro power plant
4 Understand various types of Civil Engineering structures used in hydropower
development and design aspects
5 Knowledge about electrical aspects of power unit and understand the importance of
these items.

Course Outcome
After completion of syllabus student able to
1 To understand about the sources of water power and estimation of its potential
2 To learn the concept, design, investigation of power canals and its components
3 To understand the concept, design, investigation about various parts of power units.
4 To understand the concept, investigation about various parts of a power house.
5 To impart the knowledge about electrical aspects of power unit and understand the
importance of these items.
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

BECVE703 3 3 3 2 1 2 2
T CO1

BECVE703 3 3 3 3 1 2 2
T CO2

BECVE703 3 3 3 3 2 2 1
T CO3

BECVE703 3 3 3 2 2
T CO4

BECVE703 3 3 3 2 2 2
T CO5

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1 Introduction
Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO

sources of energy, importance of water power, Hydropower 03 1

development, Estimation of water power potential

Types of hydro power plant : classification of hydel plants, Run of river 03 1

plants, General Arrangements of Run of River Plants, Valley Dam

plants, Diversion Canal Plants, High Head diversion plants,
Storage and pondage, Tidal power plant - Recent experiences in wave
power development.
Pumped storage power plants, Small and mini Hydropower systems - 02 1

Power demand, general description of layout; topographic requirements

of each above.
08
Unit No.2 Water Conveyance System &Penstock
Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
Power Canals, Alignment, Design criteria for Power canals, Flumes, 03 2

Covered conduits and Tunnels

Penstocks: general classification; design criterion; economical 05 2

diameter; Anchor blocks, Conduit valves, Bends and manifolds.

08

Unit No.3 Water Hammer & Surge Tank

Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
Water hammer: Introduction, Transients caused by turbine, Load 03 3

acceptance and rejection,equation for uniform diameter penstock, use

of Allievi's chart.
Surge tanks: types; functions; locations; hydraulic design & stability 05 3

of surge tanks, Channel Surges

08

Unit No.4 Intake

Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
Intakes: Types, locations, losses, trash & other components, control 03 4

gates, emergency gates, canal forebay, general principles of alignment

and balancing tank.
Turbines : types,general description and layouts, specific speed, Basic 03 4

flow equations, characteristics of turbines

06
Unit No.5 Power House
Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
Power houses: types, general layouts and approximate dimensions. 03 5

Electrical Load on Hydro Turbines : Load Curve, load Factor, 04 5

Capacity Factor, utilization factor, Diversity Factor, load Duration

Curve
07

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit
Text Research Reference
No.
Book paper book
Water Power Barrows Tata McGraw √
Engineering H.K. Hill
Publishing
Company Ltd
Hydropower Varshney, Nem Chand √
Structures R.S. Brothers
Water Power Sharma, Vikas √
Engineering Dandekar Publishing
M.M. House,
Gaziabad,
Handbook of Nigam P.S. Nem Chand √
Hydroelectric & Brothers,
Engineering India
Hydro electric Creager and John Wiley √
Hand Book Justin
Irrigation Arora, K.R. Standard √
water power Publishers
and Water Distributors,
 Resources Delhi
Engineering
Water Power Sharma R.K. S. Chand √
Engineering & Sharma Publication
T.K
Hydraulic Streeter V. McGraw Hill √
Transient L. & Wylie Book
E. B Company,
New York
Water power Deshmukh Dhanpat Rai √
engineering M.M New Delhi
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit: 3 Lecture (L): 3 Hrs Tutorial/Activity (T/A): 3/0 hrs. Practical (P): 0 Hrs.
Subject Code BTCVE703T Name of Subject: Bridge Engineering (Elective-V)
Examination Scheme
University Minimum Examination
Internal Marks:
Marks: Passing Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
Students should be able to choose the appropriate bridge type for a given project, and
1
to analyses and design the main components of the chosen bridge.
To help the student develop an intuitive feeling about the sizing of bridge elements, ie.
2
develop a clear understanding of conceptual design.
3 To understand the load flow mechanism and identify loads on bridges.
To develop an understanding of and appreciation for basic concepts in proportioning
4
and design of bridges in terms of aesthetics, geographical location and functionality
5 Student should know about various types of loads on the bridges.

Course Outcome
After completion of syllabus student able to
1 To analyze the functional utility of bridges and their components.
To determine the forces acting on bridges and to calculate bending moment, shear force
2
etc.
To understand the behaviour of components of bridge due to load and able to design it
3
for safety and serviceability.
4 To understand the support conditions, the functional utility and use of bearings.
 MAPPING OF CO WITH PO
PO PO PO PO PO PO PO PO PO PO PO1 PO
CO/PO
1 2 3 4 5 6 7 8 9 10 11 12
Subject
Code
&CO
CO1 3 3
CO2 3 2
CO3 2 3 2
CO4 3 3 1 2
CO5 3 2 2 1
1 Low 2 Medium 3 High

SYLLABUS

Unit No.1 Bridges

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Bridge 1
Types of bridges 1
Different Component of bridge 1
08
functions of Bridge component
IRC Loading
Loading Standards 1
08
Unit No.2 Bridge Girder
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Design of Balanced Cantilever Bridge 2
Design of Balanced Cable Stayed Bridge 2
08
Introduction, Types of Girder
Design of Bow String Girder Bridge
08
Unit No.3 Pre-stressed Concrete Bridge
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Design of pre-stressed concrete girder 3
box girder bridges
08
box girder bridges considering only primary torsion 3
Design of end block 3
08
 Unit No.4 Component of Bridges
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Piers
Abutments 4
Wing walls factors effecting and stability
08
Bridge Bearing
Types of bearings
Elastomeric bearing
08
Unit No.5 Bridge Foundation
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Well foundations 5
Design and construction of well
Open well, sinking of walls 08
Plugging 5
Sand filling and casting of well cap 5
08

References
Applicable Category
Name of Name of Name of
for Unit Edition Text Research Reference
Book Author Publisher
No. Book paper book
I,II,III, Bridge TataMcGraw-
S.Ponnuswamy I  -
IV&V Engineering Hill, 1986.
Narosa
I,II,III, Bridge
N.Rajagopalan Publishing I  -
IV&V superstructure
House, 2006
Oxford &
Essentials of IBH
III Bridge Victor, D.J. Publishers I - 
Engineering Co., New
Delhi,1980
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week 3-0-0
Total Credit:03 Lecture (L): 03Hrs Tutorial/Activity (T/A):00 Hrs. Practical (P): 00 Hrs.
Subject Code BTCVE704T Name of Subject: Design of Earthquake Resistant Structure
(Elective-VI)
Examination Scheme
Internal Marks: University Marks: Minimum Passing Examination
Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
1 To provide a coherent development to the students for the courses in sector of earthquake
engineering
2 To design earthquake resistant structures as per IS 1893
3 To present the foundations of many basic engineering concepts related earthquake
Engineering
4 To involve the application of scientific and technological principles of planning, analysis,
design of buildings according to earthquake design philosophy.

Course Outcome
After completion of syllabus student able to
1 Understand the philosophy of earthquake resistant design.
2 Understand the concept of various effects on structure due to earthquake.
3 Evaluate seismic forces for various structures as per relevant Indian standards
4 Design and ductile detailing of structures for seismic resistance as per Indian standards
5 Apply the concepts of repair and rehabilitation of earthquake affected structures
 MAPPING OF CO WITH PO
CO/PO PO PO PO PO PO PO PO PO PO PO PO PO
1 2 3 4 5 6 7 8 9 10 11 12
Subject
Code &
CO NO.
CO1 3 3 3 3 - - - - - 2 - 3
CO2 3 3 3 3 - - - - - 2 - 3
CO3 3 3 3 3 - - - - - 2 - 3
CO4 3 3 3 3 - - - - - 2 - 3
CO5 3 3 3 3 - - - - - 2 - 3
Avg CO 3 3 3 3 - - - - - 2 - 3
1 Low 2 Medium 3 High

SYLLABUS
Unit -I
Allotment Mapped
of with CO
Engineering seismology, Elastic rebound theory, Theory of plate Hours Number
tectonics and movement of Indian plate, Seismic waves. Seismic L T/A CO
intensity, Richter scale, Introduction on to tsunami. Seismic zoning
06 1
maps of India , Response spectra. Strong motion characteristics.

Unit -II
Allotment Mapped
of with CO
Earthquake effects on the structures, combination of loads, Seismic Hours Number
damages during past earthquakes, Effect of irregularities and building L T/A CO
architecture on the performance of RC structures
06 2

Unit -III
Allotment Mapped
of with CO
Seismic methods of analysis, seismic design methods, Mathematical Hours Number
modelling of multi-storeyed RC buildings with modelling of floor L T/A CO
06 3
diaphragms
Unit -IV
Allotment Mapped
of with CO
Design of multi – story RC structure foundation as per latest (IS 1893- Hours Number
2016) by Equivalent static lateral load method and Response spectrum L T/A CO
Method, Introduction to Time history method. Concept of Capacity
10 CO4
based design of soft story RC building. Concept of shear walls. Ductile
detailing as per latest IS :13920-2016

Unit -V
Allotment Mapped
of with CO
Seismic retrofitting, Source of weakness in RC framed building, Hours Number
Various retrofitting techniques, case studies. Introduction to Base L T/A CO
Isolation system. IS code provision for retrofitting of masonry
structures, failure modes of masonry structures and repairing 08 5

techniques

References
Applicable Name of Book Name of Author Name of Edition Category
for Unit Publisher
Text Research Reference
No.
Book paper book

V Design of Seismic FarzadNaeim, 2007

Isolated Structures James M.
Kelly
IV Dynamics of A K. Chopra Prentice- 3RD
Structures: Theory Hall of
and Applications to India
Earthquake
Engineering
IV Dynamics of A K. Chopra Pearson 2007
Structures
ALL Earthquake PankajAgarwal Prentice 2006
Resistant Design of and Manish Hall
Structures Shrikhande India,

List of Code/Handbook
Applicable Title of Code Type of Year of Publication
for Unit No. code
II,III,IV IS-1893 CRITERIA FOR EARTHQUAKE 2016
RESISTANT DESIGN OF STRUCTURES PART 1
GENERAL PROVISIONS AND BUILDINGS ( Fifth &
Sixth Revision )
IV IS-13920 DUCTILE DETAILING OF REINFORCED 2016
CONCRETE STRUCTURES SU'BJECTEDTO
SEISMIC FORCES - CODE OF PRACTICE

Applicable for Website address

Unit No.
All NICEE (National Information Centre for Earthquake Engineering)
IITK
https://www.nicee.org/
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE &TECHNOLOGY
B.TECH CIVIL ENGINEERING
(CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit: - 03 Lecture : 3 Tutorial//Activity(T/A): 0Hrs Practical(P): 0Hrs
Hours
Subject Code BTCVE704T Advance Engineering Geology (ELECTIVE-VI)
Examination Scheme

Examination
Internal Marks- University Minimum Passing Marks: Duration:
30 Marks
(l5marks. for sessional
Examination) 70 Marks 45 Marks 3Hou
rs
(15 Marks for Activity
based)

Course Objectives
1 To study principles of geology applicable for tunnel and underground openings.
2 To analyze the engineering behavior of rock in underground excavations.
3 To develop interpretation skills for underground projects.
4 Confident in problem solving related to engineering behavior of the subsurface.
5 Effective technical communication, Forecasting, Calculated risk taking.

Course Outcomes
After completion of syllabus, students would be able to
Apply engineering geological concepts and approaches on rock engineering
1 projects.
Explain soil profile, geo-hydrological characters of various rock formations and
2
necessity of geological studies in water conservation.
Synthesize and Interpret the geologic data to establish the geological framework
3 needed for design and construction of underground openings
Validate the suitability of rocks based on mechanical properties, R.Q.D. and
4
geophysical exploration
Illustrate the suitability of proposed alignments for tunnels and bridges on the basis
5
of Geological investigations.
 MAPPING OF CO WITH PO
COs PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 3 2 2 1 1 1 2 1 -- -- 2 2
CO2 3 2 1 1 -- -- 2 1 1 1 -- --
CO3 3 2 2 2 1 2 -- 2 -- -- -- --
CO4 3 2 1 1 -- -- 2 2 -- 1 2 2
CO5 3 2 2 2 2 -- -- 1 -- -- 2 2
Avg 3 2.0 1.6 1.4 1.33 1 2 1.4 1 1 2 2
1 Low 2 Medium 3 High

SYLLABUS

Allotment Mapped
Details of Topic of with CO
Hours Number
L T/A CO
UNIT NO.1 Engineering Geology In Theory And Practice
Engineering Geology In Theory And Practice: Influence of various
minerals on the engineering behavior of rocks, role of structural
03 1
geology, geomorphology and stratigraphy in deciding alignment of
the tunnels.
Engineering Geological Interpretation of Laboratory and In-Situ
Tests Rocks :Physical properties, Compressive strength, Tensile
strength, Direct shear test, Triaxial shear test, Slake durability test,
03 1
Schmidt rebound hardness test, Sound velocity test, In-Situ Tests:
In situ stresses, Plate loading test, Goodman jack test, Plate jacking
test, In-situ shear test, Field permeability test.
06
UNIT NO.2 Soil Profile of India
Geological process of soil formations: rock weathering conditions
favorable for decomposition, disintegration, effect of climate on
03 2
formation of soil, soil profile of various states in India, residual and
transported soils, various water conservation techniques.
Effect of over exploitation of tube wells, bore wells and dug wells,
artificial recharge, rainwater harvesting, watershed development
03 2
and necessity of geological studies, relevant case studies
highlighting the success and failure of these techniques.
06
 UNIT NO.3 Engineering Geological Investigation for Tunnels or
underground openings
Engineering Geological Investigation for Tunnels or underground
03 3
openings: Stability of portal sections; evaluation of tunnel alignment.
Choice of method of tunneling depending on the geological
03 3
framework. Problems in underground openings of coastal area.
06
UNIT NO.4 Geophysical Explorations and Rock Mechanics
Geophysical explorations: various methods of geophysical
explorations, evaluation and analysis of the data produced during
03 4
these methods, application of these methods in civil engineering
projects.
Rock mechanics: general principles of rock mechanics, dependence
of physical and mechanical properties of rocks on geological 03 4
characters, analyzing and evaluating of core recovery.
06
UNITNO.5 Engineering Geological Exploration
Geological exploration for tunnels: variations in methodology of
investigation for different types of tunnels for different purposes,
location, spacing, angles and depths of drill holes suitable for
03 5
different types of tunnels, difficulties introduced in various
geological formation and their unfavorable field characters, stand up
time of rock masses and limitations of it.
Dependence of protective measures such as guniting, rock bolting,
shotcreting, steel fiber shotcreting, permanent steel supports, lagging
concreting and grouting above permanent steel supports on
geological conditions, illustrative case studies. Bridges: investigation 03 5
for bridge foundation, special techniques, and objectives of
investigation for bridge foundation, bridge foundation based on
nature & structure of rock, foundation settlements.
06

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit
Text Research Reference
No.
Book paper book
Oxford
Subinoy
1,2,3,4,5 Engineering University Yes
Geology Gangopadhyay
Press.
1,2,3,4,5 Introduction to B. P. Verma Khanna Pub Yes
 Rock New Delhi
Mechanics,
Fundamentals Jaeger J. C., Blackwell
1,2,3,4,5 of Rock Cook N. and Scientific Yes
Mechanics Zimmerman R Publications
Introduction to
John Wiley &
1,2,3,4,5 Rock Goodman R. E Yes
Sons
Mechanics
Tunnels:
T. M. Megaw Ellis Horwood
Planning,
1,2,3,4,5 and J. V. ltd. John Willey Yes
Design,
Bartlett & Sons.
Construction

Applicable
for Unit Web site address
No.
1,2,3,4,5 https://youtu.be/aTVDiRtRook
1,2,3,4,5 https://youtu.be/yodHMzUx2V4

List of Code/Handbook
Applicable Type of Year of
for Unit Title of Code
code Publication
No.
Glossary of items relating to river valley projects: Indian
1, 2 2020, Feb
Part 7 Engineering Geology (First Revision). Standard

Indian Standard Glossary of terms and Symbols

4 Fifth Edition Nov, 1998
Relating to rock Mechanics.
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit:03 Lecture (L): 3 Hrs Tutorial/Activity (T/A): 0 Hrs Practical (P): 0 Hrs
Subject Code BTCVE704T Name of Subject: Water & Wastewater Treatment
(Elective-VI)
Examination Scheme
Internal Marks: University Minimum Passing Examination
Marks: Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
1 The course will provide students’ knowledge regarding the different sources of water &
waste water, characteristics, available treatment technologies and designs
2 The course will make students able to design and implement the different water and
wastewater treatment units
3 The course will provide students the knowledge regarding real problems finding and
handling strategies of water and wastewater treatments.
4 The course will prepare students to learn recent and advanced treatments of water and
wastewater and disposals methods.

Course Outcome
After completion of syllabus student able to
1 Understand the process and design components of water treatment such as Aeration,
coagulation-flocculation and Sedimentation
2 Understand the process and design the components of water treatment such as Filtration,
Disinfection
3 Understand the various sources characteristics and disposal methods of wastewater
4 Understand and design the different preliminary and primary waste-water treatment
5 Understand and design the different Secondary waste-water treatment
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO 1
3 2 2 2 3 1 - 1 - 1
CO 2
3 2 2 1 1 2 3 1 - 1 - 1
CO 3
3 2 1 1 2 3 1 - 1 - 1
CO 4
2 2 2 1 1 2 3 1 - 1 - 1
CO 5
2 1 2 1 1 2 3 1 - 1 - 1

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1 Introduction to WTP & Aeration, Coagulation- flocculation & Sedimentation
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Introduction to Water Treatment: Objective of water treatment, unit
operation and unit processes, treatment flow sheet, site selection for 01

water treatment plant

Aeration: objective of aeration, types or aerators, 01

Design of cascade aerator, gas transfer, two film theory 01

Coagulation- Flocculation: Theory of coagulation objectives, types &

factors affecting coagulation and flocculation, nature and types of 1
01
chemical coagulants used in water treatment, coagulant and flocculent
aids
Design of rapid and slow mixing devices (hydraulic and mechanical), 01

Sedimentation: Theory of sedimentation, factors affecting, types of

01
settling, analysis of discrete and flocculent settling,
Design of sedimentation tank and clariflocculators 01

07

Unit No.2 Filtration, Disinfection &Minor methods

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO

Filtration: mechanism of filtration, types of filters 01

Design of rapid sand filters, filter media specifications, 01

01 2
Preparation of filter sand from stock sand, problems in filtration.
Disinfection: Method of disinfection, kinetics of disinfection, types of 01
disinfectants,
chlorination, method of chlorination (breakpoint chlorination), factors
affecting efficiency of chlorination 01
2
Iron and manganese removal, de-fluorination. 01

Recent development in water treatment 01

07
Unit No.3 Characteristics & Disposal of Waste water

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Introduction to waste water Sources, Physical and chemical 02
characteristics of waste water
DO, BOD, COD, determination of BOD rate constant, Problems on DO and 03 3
BOD
Disposal of sewage by dilution and by land disposal, Streater-Phelps’s 02
equation. Numerical
07

Unit No.4 Preliminary & Primary Waste water Treatment

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Treatment Methods: Waste water treatment flow sheet, preliminary & 02
primary
secondary methods of treatment, 02 4

Design of screen, Girt chamber and primary settling tank. 03

07

Unit No.5 Secondary Treatments

Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Biological unit processes: principle of biological treatment processes,
design parameters of activated sludge process, aerated lagoons and 03
stabilization ponds.
Design of ASP, Sludge treatment, aerobic and anaerobic digestion, 5
reactor types (such as UASB, AFFB, Hybrid reactor) & factors affecting 03
anaerobic digestion and sludge drying beds (excluding design)

06
 References
Applicable Name of Book Name of Name of Publisher Edition Category
for Unit Author
Text Research Reference
No.
Book paper book
1 “Waste Water Sali J. Tata Mcgraw 2008 Text
Treatment for Book
Arcelvala Hill
Pollution Control
and Reuse”.
2 Water Supply Dr. P.N. Standard 2018 Text
Book
Engineering Modi Publication 6th

Environmental edition

Engineering
Vol.-I
3 Water Supply Dr. P.N. Standard 2018 Text
Book
Engineering Modi Publication 6th

Environmental edition

Engineering
Vol.-II
4 Design of Water Dr. A.G. IWWA, 2008 Research
Article
Treatment Plant Bhole Nagpur centre
5 Environmental Dr. B.C. Laxmi 2005 Reference
book
Engineering Vol- I Punmia Publication
& II
6 Water and Waste Metcalf Tata McGraw 2017 Reference
Water Treatment, Hill. (Third book
and Eddy
Disposal And 6
reuse edition)
 List of Code/Handbook
Applicable Title of Code Type of Year of Publication
for Unit No. code
I, II CPHEEO 2009
CPHEEO Manual on Water Supply and Treatment Manual

II, IV, V CPHEEO 2013

Manual on Sewerage and Sewage Treatment Manual
Systems - 2013
Applicable for Website address
Unit No.
I, II https://jalshakti-ddws.gov.in/cpheeo-manual-water-supply-and-
treatment
II, IV, V http://cpheeo.gov.in/cms/manual-on-sewerage-and-sewage-
treatment.php
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B.TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)

Sem: VII Total Hours Distribution per week

Total Credit: 3 Lecture : 3 Hours Tutorial//Activity (T/A): 0Hrs Practical (P): 0Hrs

Subject Code BTCVE704T Subject:- Forensic In Civil Engineering (Elective-VI)

Examination Scheme

Internal Marks- University Minimum Passing Examination

Marks: Duration:

30 Marks
(l5marks. for sessional Examination) 70 Marks 45 Marks 3 Hrs
(15 Marks for Activity based)

Course Objectives
1 To impart knowledge of various testing methods of Failed Structures.
2 To learn about aspects of failures connected with various structural systems and
materials.
3 To impart knowledge about foundation failures.

4 To know about strategic measures against failures

5 To gain insight into previous structural failures.

Course Outcomes
After completion of syllabus, students would be able to
1 Understand various testing methods of Failed
Structures.
2 Understand the aspects of failures connected with various structural systems and
materials.
3 Plan the strategic measures against failures.
4 Can write the legal and technical report of the failure in lucid manner.
5 To impart knowledge about structural failures
 MAPPING OF CO WITH PO

CO/ P0 PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

C 01 2 3 2 - - 1 1 1 1 - - 2

C 02 2 2 2 2 - 1 1 1 1 1 2 2

C 03 3 3 2 2 1 1 1 1 2 1 1 2

C 04 3 3 2 1 - 1 1 - - 2

CO5 1 2 2 - - - - - - - 2

AVG. 2.2 2.6 2.00 1.00 0.2 0.8 0.8 0.75 1 0.5 0.75 2.00
1 Low 2 Medium 3 High

SYLLABUS
Allotmentof Mapped
Details of Topic Hours with CO
Number
L T/A co
UNIT NO.1
Introduction to forensic engineering, Forensic investigations- 03 1
tools and techniques.
Scope and extent of application of Forensic Engineering techniques 04 1
in various fields of Civil Engineering.

07
UNIT NO.2
Structural Failures: Failure of construction materials steel, concrete 04 2
- Joints by Bolt and weld. Failure of compression members and
tension members by reversal of loads

Failure aspects of post tensioned concrete systems, space frame, 02 2

plane frame, precast buildings, failure of bridges.
Geo-Technical Failures: Soil liquefaction, failure of foundation 02 2
systems – Causes and prevention
08
 UNIT NO.3
Testing of failures: Various methods of testing of failed structures & 03 3
instrumentation- Laser scanning, microscope, Radio graphic
evaluation, Load Testing of shoring systems and repair technology
Back analysis: Selection of theoretical model - methods of analysis, 04 3
Instrumentation and Monitoring. Development of the most probable
failure hypothesis - cross-check with original design
07
UNIT NO.4
Designing Against Failure: Quality control – Material selection, 04 4
workmanship, design and detailing
Performing reliability checks, Legal issues involving jurisprudence 03 4
system, insurance, reducing potential liability, responsibility of engineers
and contractors. Professional practice and ethics.
07
UNIT NO.5

Case Studies on famous failures – Reasons and lessons learnt 04 5

Aspects of professional practice. Forensic analysis of R.C.frames 03 5

07
References
Applicable Name of Name Name Edition Category
for Unit Book of of Text Researc Referenc
No. Author Publishe Book h e
r book
paper
1&2 Guidelines Gary L ASCE Text
for Forensic Lewis Publicati Book
Engineering on
Practice
3 Introduction Randall CRC Text
to Forensic K Press Book
Engineering Noon
4&5 Forensic Sam Brown ISI Text
Publication Book
Engineering
It • f
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: Lecture (L): 3 Hrs Tutorial/Activity (T/A): 0 Hrs. Practical (P): 0 Hrs.
Subject Code BTCVE704T Name of Subject: Irrigation Management (Elective-VI)
Examination Scheme
Internal Marks: University Minimum Passing Examination
Marks: Marks: Duration:
30 Marks
(15marks for sessional Examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
1 To Learn basic principles of irrigation management
2 To impart the knowledge of various irrigation efficient and effective methods
3 To know the efficient irrigation and water management to maximise crop yield
4 To discuss the importance of participation of irrigation stake holders
5 To know various rules and regulations, various water laws

Course Outcome
After completion of syllabus student able to
1 Discussion of various principles of irrigation management
2 Study of various methods of canal section design and approaches of optimal canal
design
3 Estimation of seepage losses through a canal system and criteria to minimise it
4 Involvement of various stake holders of irrigation system and efficient functioning for
the better efficiency of the system
5 Knowing various policies and attempt made by state and central Government for the
proper functioning of irrigation system
 MAPPING OF CO WITH PO
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
BECVE704T CO1 2 2 3 1 1 2
BECVE704T CO2 3 3 3 1 2 2
BECVE704T CO3 2 3 3 3 3 3
BECVE704T CO4 2 2 1 1 2 1 3 2
BECVE704T CO5 3 3 2 1 3 1 1 3

1 Low 2 Medium 3 High

SYLLABUS
Unit No.1
Importance of Irrigation Allotment Mapped
of with CO
Hours Number
L T/A CO
Goal and importance of irrigation management, various methods of 08 1
irrigation, water use efficiencies, water charges, measurement of depth
of irrigation, cropping pattern, crop rotation, conjunctive use
08
Unit No.2
Canal Irrigation Allotment Mapped
of with CO
Hours Number
L T/A CO
Types of canal, optimal canal design, an efficient canal network, 08 2
maintenance of canal system, balancing canal section, methods of canal
design and concept of command Area development authority
08
Unit No.3
Water Losses Allotment Mapped
of with CO
Hours Number
L T/A CO
Canal losses, measurement of canal losses, minimising the canal losses, 08 3
canal lining, economic s of canal lining, concept of night irrigation
Unit No.4
Involvement of stake holders Allotment Mapped
of with CO
Hours Number
L T/A CO
Former participation water uses societies, participatory irrigation 08 4
management, training to the water users, role of engineers in irrigation
system
08
Unit No.5
Irrigation Policies Allotment Mapped
of with CO
Hours Number
L T/A CO
Irrigation policies and institution, present state of irrigation policies; 08 5
water dispute, inter-state river water dispute, concept of inter linking of
rivers and discuss their feasibilities
08

References
Applicable Name of Book Name of Author Name of Publisher Edition Category
for Unit
Text Research Reference
No.
Book paper book
Water D.K.Mujumdar Prentic Hall of 2013 Yes
Management India Learning
Pvt. Ltd, New
Delhi
Efficient use G.H.Sankar Kalyani 2006 Yes
of Irrigation Reddy and Y. Publishers,
Water Reddy Ludhiana
Irrigation A.M.Michael Vikas 2006 Yes
Theory and Publishing
practice House Pvt. Ltd,
New Delhi
Hand Book - CWC CWC, New 1990 Yes
Irrigation Publication Delhi
System Technical
Operation Report No.33
Practice,
Water
Resources
Management
and training
project,
Managing Maloney C. Stage 1994 Yes
Irrigation . And Raju K.V. Publication,
Together New Delhi,
Practices and India
Policy in
India
 RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY, NAGPUR
FACULTY OF SCIENCE & TECHNOLOGY
B. TECH CIVIL ENGINEERING (CHOICE BASED CREDIT SYSTEM)
Sem: VII Total Hours Distribution per week
Total Credit: 3 Lecture (L): 3 Hrs Tutorial/Activity (T/A): 0 hrs. Practical (P): 0 Hrs.
Name of Subject: Pavement Analysis & Design
Subject Code BTCVE704T
(Elective-VI)
Examination Scheme
Minimum Examination
Internal Marks: University Marks:
Passing Marks: Duration:
30 Marks
(15 Marks for sessional examination) 70 Marks 45 Marks 3 Hours
(15 Marks for Activity based)

Course Objective
The student can understand, analyze, apply and evaluate various parameters required in
1
the design of flexible and rigid pavement of highway and airfield pavements.

They can analyze, apply and evaluate the analysis of flexible and rigid of highway and
2
airfield pavements.

They can analyze, apply and evaluate the design of flexible and rigid of highway and
3
airfield pavements.

They will be able to conduct field tests and can analyze, apply and evaluate the design
4
strengthening of pavements.

Course Outcome
After completion of syllabus student able to

Analyze the stresses and strains in a flexible pavement using multi-layered elastic
1
theory.

2 Design a flexible pavement using IRC, Asphalt Institute, and AASHTO methods.
3 Analyze stresses and strains in a rigid pavement using Westergaard’s theory.
4 Design a rigid pavement using IRC, and AASHTO methods.

Comprehend the concept of strengthening of existing pavements and pavement

5
management system
 MAPPING OF CO WITH PO

PO PO PO PO PO PO PO PO PO PO PO1 PO
CO/PO
1 2 3 4 5 6 7 8 9 10 11 12
Subject
Code
&CO
CO1 2 2
CO2 3 2
CO3 2 1 2
CO4 3 3 1
CO5 3 2 2
1 Low 2 Medium 3 High

SYLLABUS

Unit No.1
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
General: Types and component parts of pavements 1
Factors affecting design and performance of pavements. 1
Design parameters: Design wheel load, Standard axle load and wheel
assemblies for road vehicles
Under carriage system of aircraft. Tyre and contact pressure, contact
area, imprints, computation of 08
ESWL for flexible and rigid pavements. ESWL of multiple wheels,
repeated loads and EWL factors.
Pavement behaviour under transient traffic loads. airport traffic areas,
Serviceability concept. 1

08

Unit No.2
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Analysis of flexible pavement : stress, strain, 2
Deflection analysis one layer system by boussinesq's. 2
Burmister's two layer theory, three layer
Multi-layer theories, wheel load stresses, 08
Layer equivalent concepts, stress and deflections for rigid pavements
2
due to load and temperature, influence charts
Analysis of rigid pavement : wheel load stresses, warping stresses,
2
frictional stresses, combined stresses.
08
Unit No.3
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Design using the latest IRC code (Flexible Pavement) 3
Design using the latest IRC code (Rigid Pavement)
08
AASHTO method of design. 3

08
Unit No.4
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Introduction & function of rigid pavement
Highway rigid pavement design 4
Design of cc pavement for roads
Runways as per IRC latest code, 08
Design of joint details for longitudinal joints, contraction joints and
expansion joints,
PCA and, aashto methods.
08
Unit No.5
Allotment Mapped
of with CO
Details of Topic Hours Number
L T/A CO
Pavement testing and evaluation: pavement failures in both flexible 5
Pavement & rigid pavement - types and causes,
Condition surveys and surface evaluation for unevenness,
Rut depth, profilometers, bump integrators, falling weight
08 5
deflectometer.
Failures of pavements: causes and remedies, maintenance and
5
rehabilitation of pavements strengthening of pavements,
Benkleman beam deflection study, falling weight deflectometer. 5
08
 References
Category
Applicable Name of Name of
Name of Book Edition Text Research Reference
for Unit No. Author Publisher
Book paper book
Srinivasa Orient Black
Pavement Design 2013  - -
Kumar, R Swan
Pavement
Universities
Evaluation and
Srinivasa Press (India)
Maintenance -  - -
Kumar, R Private
Management
Limited
System
H.J.Yoder
Principles of John wiley
and - - - 
Pavement Design and sons.
Witczak
Khanna
Highway Nem Chand
O.P, Justo -  - -
Engineering Publishers
C.G
Ministry
MOST Published by
of Surface
SPECIFICATIONS Indian
Transport 1997 
FOR ROAD & Roads
(Roads
BRIDGES Congress
Wing)

List of Code/Handbook
Applicable
Type of Year of
for Unit Title of Code
code Publication
No.
IRC-37: (Latest Code) Guide lines for Design of Flexible
Pavement IRC
IRC-58: (Latest code) Guide lines for Design of Plain
Jointed Rigid Pavement for highways
IRC