63041_2-3_T214-A-e 25.01.

2006 14:54 Uhr Seite 1

PTFE-LINED BUTTERFLY VALVE T 214-A PTFE-LINED BUTTERFLY VALVE T 214-A PTFE-LINED BUTTERFLY VALVE T 214-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE
Nominal diameter: DN 50 – DN 300 - The torque values specified
13
Face-to-face: EN 558 Series 20 (DIN 3202 T3 K1) (MD) are based on dry media
4 ISO 5752 Series 20 and are measured with air at a
API 609 Table 1 tempera- ture of 20 °C.
4 6 BS 5155, Tab. 6 Series 4
NF E 29-305.1 - The values specified are based DN [mm] 50 65 80 100 125 150 200 250 300
on the initial breakaway toque
3 Flange accommodation: DIN 2501 PN 10/16 Size [in] 2 21/2 3 4 5 6 8 10 12
5 ANSI B 16.5, Class 150 (disc disengages from seat,
torque then drops). MD [Nm] 40 40 70 95 130 170 230 350 480
MSS SP44 Class 150
7
AWWA C 207 - Dynamic torque specification
8 AS 2129 Table D and E
1 available upon request.
2 BS 10 Table D and E
JIS B 2211-5 K Regarding the dimensioning of
JIS B 2212-10K actuators, please contact our
1 3 Flange Surface Design: DIN 2526 Form A-E, ANSI B 16.5 RF engineers.
Top flange: EN ISO 5211 18
NF E 29-402 DN 50 to 150, special design
16
14
Marking: DIN EN 19 PRESSURE/TEMPERA- with stainless steel disc

Differential Pressure PS (bar)

11 Tightness check: DIN 3230 T3 BO (Leakage rate 1) TURE DIAGRAM 14
8 ISO 5208, Category 3
7 API 598 Table 5 and for valves with silicone elastomer 12
14 ANSI B 16-104, Class VI inserts
4 DN 50 to 300, installation
5 10
9 Temperature range: –40 °C bis +200 °C between flanges (W)
(depending on operation pressure)
12 10 6 8
Operating pressure: max. 10 bar (16 bar special version)
∆
Differential pressure: max. p 10 bar (16 bar special version) 6
DN 50 to 150, end of line service (L)

Vacuum: up to 1 mbar absolute DN 200 to 300,

4
PTFE-lined butterfly Valve DN 80–200 (with silicon elastomer inserts) end of line service(L)
from –10 °C to +160 °C
2
Lug type valve for corrosive and aggressive media. The patented
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM shaft seal design ensures reliability even with high-corrosive 0
-40 -20 0 20 40 80 100 110 120 130 140 150 160 170 180 190 200
1 Body h Chevron seal applications.
Nodular Cast Iron GGG-40.3 0.7043 60-40-18 PTFE Polytetrafluorethylen PTFE PTFE Temperature TS (°C)
b Seat 9 Seal FEATURES
PTFE Polytetrafluorethylen PTFE PTFE *1 Stainless Steel X5CrNi 18-10 1.4301 304
- PTFE-lined butterfly valve for chemically toxic and highly corrosive
c Elastomer insert 10 Plug screw DIN 908 Vacuum service to 1mbar, from –10°C up to 160°C
media
Silicon standard Silicon rubber MVQ VMQ Stainless Steel G-X6CrNiMo 18-10 1.4408 CF8M
EPDM optional Etylene propylene Disc/Shaft one-piece - Environmental protection via EBRO-Safety seal Kv-VALUES DN Size Opening angle a°
caoutchouk EPDM EPDM St. Steel/St. Steel G-X2CoNiMoN26-7-4 1.4462/1.4469 F 51 - Splitted body design [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
3
FPM opt. Flourcarbon caoutchouk St/PTFE-coated St 52.3 1.4462/PTFE A 572-50 - Isolation height according to plant prescription - The Kv-value (m per hour) is
1) K
4 DU-bearing Polytetrafluorethylen PTFE PTFE the flow of water at a tempera- v-Values metal disc
- Can be installed in any desired position
Iron/PTFE Hastelloy. C4 ture of 5 °C to 30 °C ( 41 °F to 50 2 1 8 24 50 70 100 140 210
coated Titan Gr. II
- Maintenance-free 86 °F) at ip of 1 bar. 65 21/2 1 8 24 50 70 100 140 210
e Trust collar St/PTFE standard 1.4462 - Can be disassembled, material-specific recycling possible
- The Kv-values specified are 80 3 1,2 15 44 95 124 180 300 520
Stainless Steel X5CrNiMo 17-12-2 1.4401 316 St/PTFE 1.4462 *1 - Material conform to FDA based on tests carried out by 100 4 8 25 60 170 210 280 540 980
6 Bellev.spr.washer 12 Lower shaft stup
the Delfter Hydraulics 125 5 15 52 125 250 350 520 840 1400
Stainless Steel X12CrNi177 1.4310 301 Stainless Steel X39CrMo17-1 1.4122
g O-Ring 13 Wiper ring
GENERAL APPLICATIONS 1 2 Laboratories, the Netherlands.
150 6 35 95 190 350 460 850 1300 2300
FPM standard Fluor-Kautschuk FPM FKM PTFE Polytetraflourethylen PTFE PTFE - Chemically highly corrosive and toxic media - Permissible velocity of flow 200 8 69 253 457 729 1110 1783 2570 3020
Silicon optional 14 Screw - Purification plants Vmax 4,5 m/s for liquids and 250 10 120 380 690 1200 1680 2650 4500 6600
FPM/ optional Stainless Steel A4-70 1.4401 B8M
- Pharmaceutical Industry Vmax 70 m/s for gases. 300 12 165 504 937 1512 2275 3795 6810 12800
PTFE-coated
Other materials upon request. - Adhesives, Paper Industry, Fuel Transport - The throttle function is linear at 2) K
v-Values PTFE-disc
- Paint manufacture and processing an angle 30° to 70°. 50 2 1,5 12 28 52 70 96 110 150
u Recommended spare parts Subject to change without notice.
w Recommended to coated discs - Food Industry - Avoid cavitation! 65 21/2 1,5 12 28 52 70 96 110 150
- Transport of hazardous materials 80 2,5 20 48 88 118 160 200 250
*1) Optional: electrically conductive For further values, please
- Wet chloric gas contact our engineers. 100 3 12 32 68 170 210 260 500 780
- Conditioning of materials, e.g. galvanizing and pickling 125 4 18 60 135 260 380 480 790 1250
Safety seal at both shaft ends in accordance with the 150 5 45 105 205 370 490 720 1250 2200
- Processing of ore EBRO Twin Seal principle: 200 6 88 297 520 695 1130 1700 2500 2700
- Fuel transport and storage
1) Primary sealing by means of a Belleville spring washer, trans- 250 8 148 430 695 1250 1800 2520 4350 5400
mitting prestress on the spherical segment area. 263
300 10 557 960 1560 2450 4300 6700 9400
2) Secondary sealing of the shaft by means of PTFE-Chevron and
O-Ring. Subject to change without notice.

www.ebro-armaturen.com

T 214-A 2.3 [email protected]

02.2006 1.0 LD
63041_2-3_T214-A-e 25.01.2006 14:54 Uhr Seite 2

PTFE-LINED BUTTERFLY VALVE T 214-A ACTUATORS T 214-A ACTUATORS T 214-A

ØF HAND LEVER PNEUMATIC DOUBLE ACTING

ØF DN Size Hand Weight Weight
uG DN Size Actuator Weight
H1

G [mm] [in] Lever F H L Alu [kg] SS [kg] [mm] [in] Type H J K L [kg]
50- 65 2-21/2 Size II 54 70 155 0,55 0,6 50- 80 2- 3 EB 5 108 88 55 174 1,7

H2
L J
∅F
80-100 3-4 Size III 65 80 195 0,8 0,8 100-125 4- 5 EB 6 123 103 62 208 2,6
L K
125 5 Size III 90 100 276 1,4 1,4 150-200 6- 8 EB 8 136 115 68 250 4,3
250-300 10-12 EB 10 155 135 79 312 6,8

Optional shaft end: The dimensioning of actuators refers to an operating pressure of 10 bar and

H
a control air pressure of 6 bar.
double flat acc.

H
A

to EN ISO 5211
C

i
ØD

ØD

Z
B

WORM GEAR PNEUMATIC SPRING RETURN

DN Size Weight DN Size EBF Weight
[mm] [in] Gear H J K L [kg] [mm] [in] Actuator H J K L [kg]
50-100 2- 4 Size II 89 39 125 159 1,4 50- 80 2-3 EB 6 123 103 62 326 5,0
J E 125-150 5- 6 Size III 129 47 200 202 2,3 100 4 EB 8 136 115 68 389 7,7 J
J L
T 214-A with bare shaft end acc. to EN ISO 5211 200-250 8-10 Size IV 129 60 200 252 2,8 L 125-200 5-8 EB 10 155 135 79 526 14,3 K
300 12 Size V 158 76 250 280 6,3 250 10 EB 12 182 159 94 658 25,4
The dimensioning of actuators refers to an operating pressure of 10 bar. 300 12 EB 265 232 152 76 634 27,0

H
Dimensions [mm] The dimensioning of actuators refers to an operating pressure of 10 bar and

∅K
DN Size Weight a control air pressure of 6 bar.
[mm] [in] A B C D Di E F Flange G H1 H2 J Z [kg]
50 2 135 80 215 104 60,8 43 54 F04 11 12 19 160 41 3,8
65 21/2 150 82 232 104 60,8 46 54 F04 11 12 19 176 41 4,5
80 3 157 108 265 130 79,5 46 65 F05 14 16 25 230 66 6,2
100 4 180 118 298 160 99,0 52 65 F05 14 16 25 255 85 9,7
125 5 195 130 325 190 124,5 56 90 F07 17 19 25 290 112 12,0
150 6 210 142 352 210 150,5 56 90 F07 17 19 30 310 141 13,5
200 8 240 169 409 268 195,5 60 90 F07 17 19 30 390 187 22,0
250 10 275 217 492 324 247,5 68 125 F10 22 24 39 480 239 37,0
ELECTRIC ACTUATOR SWITCH BOX SERIES MSK/NSK
300 12 300 240 540 374 292,5 78 125 F10 22 24 39 550 283 55,0
Subject to change without notice. DN Size Actuator Weight MSK: Switch Box with integrated micro limit switches.
[mm] [in] Type H J K L M [kg] NSK: Switch Box with integrated proximity switches.
50-80 2- 3 E 65 233 172 80 139 119 17,0
100-250 4-10 E 110 251 245 125 139 134 14,0 45 115 100
300 12-16 E 160 239 279 198 139 157 25,0
The dimensioning of actuators refers to an operating pressure of 10 bar.

60
115
Subject to change without notice. Subject to change without notice.
63041_2-3_T214-A-e 25.01.2006 14:54 Uhr Seite 2

PTFE-LINED BUTTERFLY VALVE T 214-A ACTUATORS T 214-A ACTUATORS T 214-A

ØF HAND LEVER PNEUMATIC DOUBLE ACTING

ØF DN Size Hand Weight Weight
uG DN Size Actuator Weight
H1

G [mm] [in] Lever F H L Alu [kg] SS [kg] [mm] [in] Type H J K L [kg]
50- 65 2-21/2 Size II 54 70 155 0,55 0,6 50- 80 2- 3 EB 5 108 88 55 174 1,7

H2
L J
∅F
80-100 3-4 Size III 65 80 195 0,8 0,8 100-125 4- 5 EB 6 123 103 62 208 2,6
L K
125 5 Size III 90 100 276 1,4 1,4 150-200 6- 8 EB 8 136 115 68 250 4,3
250-300 10-12 EB 10 155 135 79 312 6,8

Optional shaft end: The dimensioning of actuators refers to an operating pressure of 10 bar and

H
a control air pressure of 6 bar.
double flat acc.

H
A

to EN ISO 5211
C

i
ØD

ØD

Z
B

WORM GEAR PNEUMATIC SPRING RETURN

DN Size Weight DN Size EBF Weight
[mm] [in] Gear H J K L [kg] [mm] [in] Actuator H J K L [kg]
50-100 2- 4 Size II 89 39 125 159 1,4 50- 80 2-3 EB 6 123 103 62 326 5,0
J E 125-150 5- 6 Size III 129 47 200 202 2,3 100 4 EB 8 136 115 68 389 7,7 J
J L
T 214-A with bare shaft end acc. to EN ISO 5211 200-250 8-10 Size IV 129 60 200 252 2,8 L 125-200 5-8 EB 10 155 135 79 526 14,3 K
300 12 Size V 158 76 250 280 6,3 250 10 EB 12 182 159 94 658 25,4
The dimensioning of actuators refers to an operating pressure of 10 bar. 300 12 EB 265 232 152 76 634 27,0

H
Dimensions [mm] The dimensioning of actuators refers to an operating pressure of 10 bar and

∅K
DN Size Weight a control air pressure of 6 bar.
[mm] [in] A B C D Di E F Flange G H1 H2 J Z [kg]
50 2 135 80 215 104 60,8 43 54 F04 11 12 19 160 41 3,8
65 21/2 150 82 232 104 60,8 46 54 F04 11 12 19 176 41 4,5
80 3 157 108 265 130 79,5 46 65 F05 14 16 25 230 66 6,2
100 4 180 118 298 160 99,0 52 65 F05 14 16 25 255 85 9,7
125 5 195 130 325 190 124,5 56 90 F07 17 19 25 290 112 12,0
150 6 210 142 352 210 150,5 56 90 F07 17 19 30 310 141 13,5
200 8 240 169 409 268 195,5 60 90 F07 17 19 30 390 187 22,0
250 10 275 217 492 324 247,5 68 125 F10 22 24 39 480 239 37,0
ELECTRIC ACTUATOR SWITCH BOX SERIES MSK/NSK
300 12 300 240 540 374 292,5 78 125 F10 22 24 39 550 283 55,0
Subject to change without notice. DN Size Actuator Weight MSK: Switch Box with integrated micro limit switches.
[mm] [in] Type H J K L M [kg] NSK: Switch Box with integrated proximity switches.
50-80 2- 3 E 65 233 172 80 139 119 17,0
100-250 4-10 E 110 251 245 125 139 134 14,0 45 115 100
300 12-16 E 160 239 279 198 139 157 25,0
The dimensioning of actuators refers to an operating pressure of 10 bar.

60
115
Subject to change without notice. Subject to change without notice.
63041_2-3_T214-A-e 25.01.2006 14:54 Uhr Seite 2

PTFE-LINED BUTTERFLY VALVE T 214-A ACTUATORS T 214-A ACTUATORS T 214-A

ØF HAND LEVER PNEUMATIC DOUBLE ACTING

ØF DN Size Hand Weight Weight
uG DN Size Actuator Weight
H1

G [mm] [in] Lever F H L Alu [kg] SS [kg] [mm] [in] Type H J K L [kg]
50- 65 2-21/2 Size II 54 70 155 0,55 0,6 50- 80 2- 3 EB 5 108 88 55 174 1,7

H2
L J
∅F
80-100 3-4 Size III 65 80 195 0,8 0,8 100-125 4- 5 EB 6 123 103 62 208 2,6
L K
125 5 Size III 90 100 276 1,4 1,4 150-200 6- 8 EB 8 136 115 68 250 4,3
250-300 10-12 EB 10 155 135 79 312 6,8

Optional shaft end: The dimensioning of actuators refers to an operating pressure of 10 bar and

H
a control air pressure of 6 bar.
double flat acc.

H
A

to EN ISO 5211
C

i
ØD

ØD

Z
B

WORM GEAR PNEUMATIC SPRING RETURN

DN Size Weight DN Size EBF Weight
[mm] [in] Gear H J K L [kg] [mm] [in] Actuator H J K L [kg]
50-100 2- 4 Size II 89 39 125 159 1,4 50- 80 2-3 EB 6 123 103 62 326 5,0
J E 125-150 5- 6 Size III 129 47 200 202 2,3 100 4 EB 8 136 115 68 389 7,7 J
J L
T 214-A with bare shaft end acc. to EN ISO 5211 200-250 8-10 Size IV 129 60 200 252 2,8 L 125-200 5-8 EB 10 155 135 79 526 14,3 K
300 12 Size V 158 76 250 280 6,3 250 10 EB 12 182 159 94 658 25,4
The dimensioning of actuators refers to an operating pressure of 10 bar. 300 12 EB 265 232 152 76 634 27,0

H
Dimensions [mm] The dimensioning of actuators refers to an operating pressure of 10 bar and

∅K
DN Size Weight a control air pressure of 6 bar.
[mm] [in] A B C D Di E F Flange G H1 H2 J Z [kg]
50 2 135 80 215 104 60,8 43 54 F04 11 12 19 160 41 3,8
65 21/2 150 82 232 104 60,8 46 54 F04 11 12 19 176 41 4,5
80 3 157 108 265 130 79,5 46 65 F05 14 16 25 230 66 6,2
100 4 180 118 298 160 99,0 52 65 F05 14 16 25 255 85 9,7
125 5 195 130 325 190 124,5 56 90 F07 17 19 25 290 112 12,0
150 6 210 142 352 210 150,5 56 90 F07 17 19 30 310 141 13,5
200 8 240 169 409 268 195,5 60 90 F07 17 19 30 390 187 22,0
250 10 275 217 492 324 247,5 68 125 F10 22 24 39 480 239 37,0
ELECTRIC ACTUATOR SWITCH BOX SERIES MSK/NSK
300 12 300 240 540 374 292,5 78 125 F10 22 24 39 550 283 55,0
Subject to change without notice. DN Size Actuator Weight MSK: Switch Box with integrated micro limit switches.
[mm] [in] Type H J K L M [kg] NSK: Switch Box with integrated proximity switches.
50-80 2- 3 E 65 233 172 80 139 119 17,0
100-250 4-10 E 110 251 245 125 139 134 14,0 45 115 100
300 12-16 E 160 239 279 198 139 157 25,0
The dimensioning of actuators refers to an operating pressure of 10 bar.

60
115
Subject to change without notice. Subject to change without notice.
63041_2-3_T214-A-e 25.01.2006 14:54 Uhr Seite 1

PTFE-LINED BUTTERFLY VALVE T 214-A PTFE-LINED BUTTERFLY VALVE T 214-A PTFE-LINED BUTTERFLY VALVE T 214-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE
Nominal diameter: DN 50 – DN 300 - The torque values specified
13
Face-to-face: EN 558 Series 20 (DIN 3202 T3 K1) (MD) are based on dry media
4 ISO 5752 Series 20 and are measured with air at a
API 609 Table 1 tempera- ture of 20 °C.
4 6 BS 5155, Tab. 6 Series 4
NF E 29-305.1 - The values specified are based DN [mm] 50 65 80 100 125 150 200 250 300
on the initial breakaway toque
3 Flange accommodation: DIN 2501 PN 10/16 Size [in] 2 21/2 3 4 5 6 8 10 12
5 ANSI B 16.5, Class 150 (disc disengages from seat,
torque then drops). MD [Nm] 40 40 70 95 130 170 230 350 480
MSS SP44 Class 150
7
AWWA C 207 - Dynamic torque specification
8 AS 2129 Table D and E
1 available upon request.
2 BS 10 Table D and E
JIS B 2211-5 K Regarding the dimensioning of
JIS B 2212-10K actuators, please contact our
1 3 Flange Surface Design: DIN 2526 Form A-E, ANSI B 16.5 RF engineers.
Top flange: EN ISO 5211 18
NF E 29-402 DN 50 to 150, special design
16
14
Marking: DIN EN 19 PRESSURE/TEMPERA- with stainless steel disc

Differential Pressure PS (bar)

11 Tightness check: DIN 3230 T3 BO (Leakage rate 1) TURE DIAGRAM 14
8 ISO 5208, Category 3
7 API 598 Table 5 and for valves with silicone elastomer 12
14 ANSI B 16-104, Class VI inserts
4 DN 50 to 300, installation
5 10
9 Temperature range: –40 °C bis +200 °C between flanges (W)
(depending on operation pressure)
12 10 6 8
Operating pressure: max. 10 bar (16 bar special version)
∆
Differential pressure: max. p 10 bar (16 bar special version) 6
DN 50 to 150, end of line service (L)

Vacuum: up to 1 mbar absolute DN 200 to 300,

4
PTFE-lined butterfly Valve DN 80–200 (with silicon elastomer inserts) end of line service(L)
from –10 °C to +160 °C
2
Lug type valve for corrosive and aggressive media. The patented
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM shaft seal design ensures reliability even with high-corrosive 0
-40 -20 0 20 40 80 100 110 120 130 140 150 160 170 180 190 200
1 Body h Chevron seal applications.
Nodular Cast Iron GGG-40.3 0.7043 60-40-18 PTFE Polytetrafluorethylen PTFE PTFE Temperature TS (°C)
b Seat 9 Seal FEATURES
PTFE Polytetrafluorethylen PTFE PTFE *1 Stainless Steel X5CrNi 18-10 1.4301 304
- PTFE-lined butterfly valve for chemically toxic and highly corrosive
c Elastomer insert 10 Plug screw DIN 908 Vacuum service to 1mbar, from –10°C up to 160°C
media
Silicon standard Silicon rubber MVQ VMQ Stainless Steel G-X6CrNiMo 18-10 1.4408 CF8M
EPDM optional Etylene propylene Disc/Shaft one-piece - Environmental protection via EBRO-Safety seal Kv-VALUES DN Size Opening angle a°
caoutchouk EPDM EPDM St. Steel/St. Steel G-X2CoNiMoN26-7-4 1.4462/1.4469 F 51 - Splitted body design [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
3
FPM opt. Flourcarbon caoutchouk St/PTFE-coated St 52.3 1.4462/PTFE A 572-50 - Isolation height according to plant prescription - The Kv-value (m per hour) is
1) K
4 DU-bearing Polytetrafluorethylen PTFE PTFE the flow of water at a tempera- v-Values metal disc
- Can be installed in any desired position
Iron/PTFE Hastelloy. C4 ture of 5 °C to 30 °C ( 41 °F to 50 2 1 8 24 50 70 100 140 210
coated Titan Gr. II
- Maintenance-free 86 °F) at ip of 1 bar. 65 21/2 1 8 24 50 70 100 140 210
e Trust collar St/PTFE standard 1.4462 - Can be disassembled, material-specific recycling possible
- The Kv-values specified are 80 3 1,2 15 44 95 124 180 300 520
Stainless Steel X5CrNiMo 17-12-2 1.4401 316 St/PTFE 1.4462 *1 - Material conform to FDA based on tests carried out by 100 4 8 25 60 170 210 280 540 980
6 Bellev.spr.washer 12 Lower shaft stup
the Delfter Hydraulics 125 5 15 52 125 250 350 520 840 1400
Stainless Steel X12CrNi177 1.4310 301 Stainless Steel X39CrMo17-1 1.4122
g O-Ring 13 Wiper ring
GENERAL APPLICATIONS 1 2 Laboratories, the Netherlands.
150 6 35 95 190 350 460 850 1300 2300
FPM standard Fluor-Kautschuk FPM FKM PTFE Polytetraflourethylen PTFE PTFE - Chemically highly corrosive and toxic media - Permissible velocity of flow 200 8 69 253 457 729 1110 1783 2570 3020
Silicon optional 14 Screw - Purification plants Vmax 4,5 m/s for liquids and 250 10 120 380 690 1200 1680 2650 4500 6600
FPM/ optional Stainless Steel A4-70 1.4401 B8M
- Pharmaceutical Industry Vmax 70 m/s for gases. 300 12 165 504 937 1512 2275 3795 6810 12800
PTFE-coated
Other materials upon request. - Adhesives, Paper Industry, Fuel Transport - The throttle function is linear at 2) K
v-Values PTFE-disc
- Paint manufacture and processing an angle 30° to 70°. 50 2 1,5 12 28 52 70 96 110 150
u Recommended spare parts Subject to change without notice.
w Recommended to coated discs - Food Industry - Avoid cavitation! 65 21/2 1,5 12 28 52 70 96 110 150
- Transport of hazardous materials 80 2,5 20 48 88 118 160 200 250
*1) Optional: electrically conductive For further values, please
- Wet chloric gas contact our engineers. 100 3 12 32 68 170 210 260 500 780
- Conditioning of materials, e.g. galvanizing and pickling 125 4 18 60 135 260 380 480 790 1250
Safety seal at both shaft ends in accordance with the 150 5 45 105 205 370 490 720 1250 2200
- Processing of ore EBRO Twin Seal principle: 200 6 88 297 520 695 1130 1700 2500 2700
- Fuel transport and storage
1) Primary sealing by means of a Belleville spring washer, trans- 250 8 148 430 695 1250 1800 2520 4350 5400
mitting prestress on the spherical segment area. 263
300 10 557 960 1560 2450 4300 6700 9400
2) Secondary sealing of the shaft by means of PTFE-Chevron and
O-Ring. Subject to change without notice.

www.ebro-armaturen.com

T 214-A 2.3 [email protected]

02.2006 1.0 LD
63041_2-3_T214-A-e 25.01.2006 14:54 Uhr Seite 1

PTFE-LINED BUTTERFLY VALVE T 214-A PTFE-LINED BUTTERFLY VALVE T 214-A PTFE-LINED BUTTERFLY VALVE T 214-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE
Nominal diameter: DN 50 – DN 300 - The torque values specified
13
Face-to-face: EN 558 Series 20 (DIN 3202 T3 K1) (MD) are based on dry media
4 ISO 5752 Series 20 and are measured with air at a
API 609 Table 1 tempera- ture of 20 °C.
4 6 BS 5155, Tab. 6 Series 4
NF E 29-305.1 - The values specified are based DN [mm] 50 65 80 100 125 150 200 250 300
on the initial breakaway toque
3 Flange accommodation: DIN 2501 PN 10/16 Size [in] 2 21/2 3 4 5 6 8 10 12
5 ANSI B 16.5, Class 150 (disc disengages from seat,
torque then drops). MD [Nm] 40 40 70 95 130 170 230 350 480
MSS SP44 Class 150
7
AWWA C 207 - Dynamic torque specification
8 AS 2129 Table D and E
1 available upon request.
2 BS 10 Table D and E
JIS B 2211-5 K Regarding the dimensioning of
JIS B 2212-10K actuators, please contact our
1 3 Flange Surface Design: DIN 2526 Form A-E, ANSI B 16.5 RF engineers.
Top flange: EN ISO 5211 18
NF E 29-402 DN 50 to 150, special design
16
14
Marking: DIN EN 19 PRESSURE/TEMPERA- with stainless steel disc

Differential Pressure PS (bar)

11 Tightness check: DIN 3230 T3 BO (Leakage rate 1) TURE DIAGRAM 14
8 ISO 5208, Category 3
7 API 598 Table 5 and for valves with silicone elastomer 12
14 ANSI B 16-104, Class VI inserts
4 DN 50 to 300, installation
5 10
9 Temperature range: –40 °C bis +200 °C between flanges (W)
(depending on operation pressure)
12 10 6 8
Operating pressure: max. 10 bar (16 bar special version)
∆
Differential pressure: max. p 10 bar (16 bar special version) 6
DN 50 to 150, end of line service (L)

Vacuum: up to 1 mbar absolute DN 200 to 300,

4
PTFE-lined butterfly Valve DN 80–200 (with silicon elastomer inserts) end of line service(L)
from –10 °C to +160 °C
2
Lug type valve for corrosive and aggressive media. The patented
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM shaft seal design ensures reliability even with high-corrosive 0
-40 -20 0 20 40 80 100 110 120 130 140 150 160 170 180 190 200
1 Body h Chevron seal applications.
Nodular Cast Iron GGG-40.3 0.7043 60-40-18 PTFE Polytetrafluorethylen PTFE PTFE Temperature TS (°C)
b Seat 9 Seal FEATURES
PTFE Polytetrafluorethylen PTFE PTFE *1 Stainless Steel X5CrNi 18-10 1.4301 304
- PTFE-lined butterfly valve for chemically toxic and highly corrosive
c Elastomer insert 10 Plug screw DIN 908 Vacuum service to 1mbar, from –10°C up to 160°C
media
Silicon standard Silicon rubber MVQ VMQ Stainless Steel G-X6CrNiMo 18-10 1.4408 CF8M
EPDM optional Etylene propylene Disc/Shaft one-piece - Environmental protection via EBRO-Safety seal Kv-VALUES DN Size Opening angle a°
caoutchouk EPDM EPDM St. Steel/St. Steel G-X2CoNiMoN26-7-4 1.4462/1.4469 F 51 - Splitted body design [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
3
FPM opt. Flourcarbon caoutchouk St/PTFE-coated St 52.3 1.4462/PTFE A 572-50 - Isolation height according to plant prescription - The Kv-value (m per hour) is
1) K
4 DU-bearing Polytetrafluorethylen PTFE PTFE the flow of water at a tempera- v-Values metal disc
- Can be installed in any desired position
Iron/PTFE Hastelloy. C4 ture of 5 °C to 30 °C ( 41 °F to 50 2 1 8 24 50 70 100 140 210
coated Titan Gr. II
- Maintenance-free 86 °F) at ip of 1 bar. 65 21/2 1 8 24 50 70 100 140 210
e Trust collar St/PTFE standard 1.4462 - Can be disassembled, material-specific recycling possible
- The Kv-values specified are 80 3 1,2 15 44 95 124 180 300 520
Stainless Steel X5CrNiMo 17-12-2 1.4401 316 St/PTFE 1.4462 *1 - Material conform to FDA based on tests carried out by 100 4 8 25 60 170 210 280 540 980
6 Bellev.spr.washer 12 Lower shaft stup
the Delfter Hydraulics 125 5 15 52 125 250 350 520 840 1400
Stainless Steel X12CrNi177 1.4310 301 Stainless Steel X39CrMo17-1 1.4122
g O-Ring 13 Wiper ring
GENERAL APPLICATIONS 1 2 Laboratories, the Netherlands.
150 6 35 95 190 350 460 850 1300 2300
FPM standard Fluor-Kautschuk FPM FKM PTFE Polytetraflourethylen PTFE PTFE - Chemically highly corrosive and toxic media - Permissible velocity of flow 200 8 69 253 457 729 1110 1783 2570 3020
Silicon optional 14 Screw - Purification plants Vmax 4,5 m/s for liquids and 250 10 120 380 690 1200 1680 2650 4500 6600
FPM/ optional Stainless Steel A4-70 1.4401 B8M
- Pharmaceutical Industry Vmax 70 m/s for gases. 300 12 165 504 937 1512 2275 3795 6810 12800
PTFE-coated
Other materials upon request. - Adhesives, Paper Industry, Fuel Transport - The throttle function is linear at 2) K
v-Values PTFE-disc
- Paint manufacture and processing an angle 30° to 70°. 50 2 1,5 12 28 52 70 96 110 150
u Recommended spare parts Subject to change without notice.
w Recommended to coated discs - Food Industry - Avoid cavitation! 65 21/2 1,5 12 28 52 70 96 110 150
- Transport of hazardous materials 80 2,5 20 48 88 118 160 200 250
*1) Optional: electrically conductive For further values, please
- Wet chloric gas contact our engineers. 100 3 12 32 68 170 210 260 500 780
- Conditioning of materials, e.g. galvanizing and pickling 125 4 18 60 135 260 380 480 790 1250
Safety seal at both shaft ends in accordance with the 150 5 45 105 205 370 490 720 1250 2200
- Processing of ore EBRO Twin Seal principle: 200 6 88 297 520 695 1130 1700 2500 2700
- Fuel transport and storage
1) Primary sealing by means of a Belleville spring washer, trans- 250 8 148 430 695 1250 1800 2520 4350 5400
mitting prestress on the spherical segment area. 263
300 10 557 960 1560 2450 4300 6700 9400
2) Secondary sealing of the shaft by means of PTFE-Chevron and
O-Ring. Subject to change without notice.

www.ebro-armaturen.com

T 214-A 2.3 [email protected]

02.2006 1.0 LD