Solid State Broadband High Power Amplifier
1117 - BBM3K5KEL 500 – 2500 MHz / 25 Watts
The BBM3K5KEL (SKU 1117) is suitable for broadband mobile Jamming and
band specific high power linear applications in the P/L/S frequency bands.
This compact module utilizes high power advanced GaN devices that provide
excellent power density, high efficiency, wide dynamic range and low
distortions. Exceptional performance, long term reliability and high efficiency
are achieved by employing advanced broadband RF matching networks and
combining techniques, EMI/RFI filters, machined housings and qualified
components. Empower RF’s ISO9001:2015 Quality Assurance Program
assures consistent performance and the highest reliability.
Solid-state class AB design
Instantaneous ultra broadband
Small and lightweight
Suitable for CW, AM, and FM (Consult factory for other modulation types)
50 ohm input/output impedance RoHS Compliant available
High reliability and ruggedness SKU# 1117-0001
Built-in control, monitoring and protection circuits
ELECTRICAL SPECIFICATIONS @ +28VDC, 25°C, 50Ω System
Parameter Symbol Min Typ Max Unit
Operating Frequency BW 500 2500 MHz
Output Power CW PSAT 25 30 Watt
Output Power @ 1dB Gain Compression P1dB 20 Watt
Small Signal Gain GSS 44 46 52 dB
Input Power for Rated PSAT PIN 0 dBm
Small Signal Gain Flatness ∆G ±1.0 ±1.5 dB
Input Return Loss S11 -10 dB
Noise Figure NF 10 dB
Third Order Intercept Point
IP3 +45 dBm
2-Tone @ 30dBm/Tone, 100kHz Spacing
Harmonics @ POUT = 20W H -25 -15 dBc
Spurious Signals Spur -70 -60 dBc
Operating Voltage VDC 26 28 30 Volt
Quiescent Current IDQ 1.5 Amp
Current Consumption @ POUT = 25W IDD 3.0 Amp
Current Consumption @ Shutdown ISD 100 mA
Switching Time @ 1kHz TTL, PIN = 0dBm TON/TOFF 2.0 5.0 uSec
MECHANICAL SPECIFICATIONS
Parameter Value Unit
Dimensions 6.0 x 3.0 x 1.0 Inch
Weight 1.0 Pound
RF Connectors Input/Output Type-SMA, Female J1 / J2
DC Interface Connector D-Sub 9-Pin, Male J3
Cooling External Heatsink (Not Supplied) -
ENVIRONMENTAL CHARACTERISTICS (Design to Meet)
Parameter Symbol Min Typ Max Unit
Operating Case Temperature TC -40 +85 °C
Storage Temperature TSTG -40 +85 °C
Relative Humidity (non-condensing) RH 95 %
Altitude (MIL-STD-810F Method 500.4) ALT 30,000 Feet
Vibration/Shock
VI/SH Airborne
MIL-STD-810F - Method 514.5/516.5 – Proc I
316 W. Florence Ave. Ph. 1 (310) 412-8100 Stock No. 1117
Inglewood, CA 90301 Fax. 1 (310) 412-9232 www.EmpowerRF.com D.S. Rev. 2.2 / Oct. 15, 2021
Solid State Broadband High Power Amplifier
1117 - BBM3K5KEL 500 – 2500 MHz / 25 Watts
LIMITS
Input RF drive level without damage +10 dBm Max
∞ @ all load phase & amplitude for duration of 1 minute
Load VSWR @ POUT = 25W -
3:1 @ all load phase & amplitude continuous
Thermal Overload 85°C Typ
DC INTERFACE CONNECTOR – D-Sub 9-Pin, Male
Pin # Description Specification
1 Spare No Connection
2 Current Monitor Analog voltage relative to IDD @ 100mV/100mA
3 Temp Sense Analog voltage relative to Module’s Temperature @ 10mV/°C
4 Spare No Connection
Amplifier Disable: TTL Logic High (5V)
5 Shutdown
(Internally Pulled-Low)
6&7 VDD +26.30.0VDC
8&9 GND Ground
OUTLINE DRAWING
316 W. Florence Ave. Ph. 1 (310) 412-8100 Stock No. 1117
Inglewood, CA 90301 Fax. 1 (310) 412-9232 www.EmpowerRF.com D.S. Rev. 2.2 / Oct. 15, 2021
Solid State Broadband High Power Amplifier
1117 - BBM3K5KEL 500 – 2500 MHz / 25 Watts
TYPICAL PERFORMANCE PLOTS
Plot 1 – Small Signals Gain Plot 2 – Small Signal Gain and P1dB
Top Curve: Small Signal Gain @ PIN = -20dBm Top Curve: Small Signal Gain @ PIN = -20dBm
Middle Curve: Small Signal Gain @ PIN = -10dBm Middle Curve: Power Gain @ P1dB, PIN = -6.0dBm
Reference: 48dB, 1dB/div. Reference: 48dB, 1dB/div.
Bottom Curve: Input Return Loss Bottom Curve: Input Return Loss
Reference: 10dB, 10dB/div. Reference: 10dB, 10dB/div.
Plot 3 – Small Signal Gain and PSAT
Top Curve: Small Signal Gain @ PIN = -20dBm
Middle Curve: Power Gain @ PSAT, PIN = -1.0dBm
Reference: 48dB, 1dB/div.
Bottom Curve: Input Return Loss
Reference: 10dB, 10dB/div.
316 W. Florence Ave. Ph. 1 (310) 412-8100 Stock No. 1117
Inglewood, CA 90301 Fax. 1 (310) 412-9232 www.EmpowerRF.com D.S. Rev. 2.2 / Oct. 15, 2021
