EDMFMT391803A - Indoor Unit FXMQ-PVM
EDMFMT391803A - Indoor Unit FXMQ-PVM
EDMFMT391803A
2. Specifications
Notes:
+1. Indoor temp.: 27°CDB, 19°CWB / Outdoor temp.: 35°CDB / Rated external static pressure / Equivalent piping Conversion formulae
length: 7.5 m, level difference: 0 m.
kcal/h=kW×860
+2. Indoor temp.: 20°CDB / Outdoor temp.: 7°CDB, 6°CWB / Rated external static pressure / Equivalent piping Btu/h=kW×3412
length: 7.5 m, level difference: 0 m. cfm=m³/min×35.3
+3. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. l/s=m³/min×1000/60
+4. External static pressure is changeable in 15 stages within the ( ) range by remote controller.
+5. Pre-filter is an optional accessory. There is a slot for pre-filter at the suction flange.
Other type of filter is not standard accessory, but please mount it in the duct system of the suction side.
Select its dust collection efficiency (gravity method) 50% or more.
+6. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
These values are normally somewhat higher during actual operation as a result of ambient conditions.
+7. Power input values are based on conditions of rated external static pressure.
8. Refer to Electric Characteristics for the power input when the airflow rate is maximum at maximum external
static pressure.
3
FXMQ200/250PVM EDMFMT391803A
FXMQ250PVM
Unit: mm
3D121335
5
FXMQ200/250PVM EDMFMT391803A
4. Piping Diagrams
FXMQ200PVM / FXMQ250PVM
3D117738
Unit: mm
Model Gas Liquid
FXMQ200PVM φ19.1
φ9.5
FXMQ250PVM φ22.2
6
FXMQ200/250PVM EDMFMT391803A
5. Wiring Diagrams
FXMQ200PVM / FXMQ250PVM
3D118424D