Automation Technology and WAGO

Electronic Interface
Supplementary Catalog to Full Line Catalogs, Volumes 3/4/6
Edition 2022/1

WAGO Rail-Mount Terminal Blocks WAGO PCB Terminal Blocks

1 and Connectors
Full Line Catalog, Volume 1 – Edition 2021/2022 12
and Connectors
Full Line Catalog, Volume 2 – Edition 2021/2022 23
Automation Technology
Full Line Catalog, Volume 3 – Edition 2021/2022 3
Catalog 2021/2022

Catalog 2021/2022

Catalog 2021/2022
WAGO Rail-Mount Terminal Blocks and Connectors

WAGO PCB Terminal Blocks and Connectors

Automation Technology

WAGO Pluggable Connection

4 WAGO Electronic Interface

Full Line Catalog, Volume 4 – Edition 2021/2022 45
System WINSTA®
Full Line Catalog, Volume 5 – Edition 2021/2022 56
WAGO Marking
Full Line Catalog, Volume 6 – Edition 2021/2022 6
Catalog 2021/2022

Catalog 2021/2022

Catalog 2021/2022
WAGO Pluggable Connection System WINSTA®
WAGO Electronic Interface

WAGO Marking
The new items in this catalog
supplement products found in
the following main catalogs

N 3/4/6

6
rking n 2021/2022
O Ma
WAG og, Volume 6 –
Editio

Volume 6 6
tal
e Ca
Full Lin
022

WAGO Marking
21/2
log 20
Cata

rking Ma
WAGO

terfa
ce 4
nic In
ctro n 2021/2022
O Ele
WAG og, Volume 4 –
Editio

Volume 4 4
e Catal
Full Lin
022

WAGO Electronic Interface

21/2
log 20
Cata

e
erfac
Int ic
ctron Ele
WAGO

olog
y 3
echn
on T ition 2021/2022
mati
Auto
Ed

Volume 3
e3–
, Volum

3
talog
e Ca
Full Lin
022

Automation Technology
21/2
log 20
Cata

logy
no
Tech
ation
Autom
Supplementary Catalog – Automation Technology and WAGO Electronic Interface

Automation Technology Volume 3 2

Volume 4
WAGO Electronic Interface 48
WAGO Power Supplies

WAGO Marking Volume 6 58

Item Number Index 64

Volume 3, Automation Technology
www.wago.com Volume 3

Volume 3, Automation Technology

Description Item No. Page

Solutions
Application Building Control; Single License; Online Activation 2759-2120/261-1000 4
Application Weather Station; Shadow Correction; Single License; Online Activation 2759-242/261-1000 6
Application Grid Gateway; Single License; Online Activation 2759-2015/261-1000 7

Software
e!RUNTIME; BACnet/IP; S; up to 48 BACnet Objects 2759-2273/211-1000, 2759-2276/211-1000 8
e!RUNTIME; OPC UA Server Extended 2759-2233/211-1000, 2759-2236/211-1000 9
OPC UA Mapping Editor Download 10
e!RUNTIME; IEC 60870 Master L 2759-296/211-1000 11
e!RUNTIME; IEC 61850 Client L 2759-2246/211-1000 12
e!RUNTIME; DNP3 Master L 2759-2296/211-1000 13
Operation and Monitoring
Wall-Mount Housing for Touch Panel 600; Visu Panel 762-9214, 762-9215 14
Wall-Mount Housing for Touch Panel 600; Control Panel 762-9314, 762-9315 15

Edge Computing
Edge Computer; 4 x ETHERNET, 4 x USB, HDMI, DP; 16 GB RAM, 256 GB Flash 752-9800 16

Controllers
Compact Controller 100; 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485; 2 x ETHERNET; SD 751-9301 18
Controller PFC200; 2nd Generation; 2 x ETHERNET, RS-232/-485, Mobile Radio Module 4G; 750-8217/6xx-000 19
Global Variant
Controller PFC200; 2nd Generation; 2 x ETHERNET, RS-232/-485; Extreme 750-8212/040-00x 20
Controller PFC200; 2nd Generation; 2 x ETHERNET, RS-232/-485, CAN, CANopen, PROFIBUS® 750-8216/040-000 21
Slave; Extreme
WAGO IoT Box; Energy Data; with Controller PFC200 (750-8212) 2854-099/000-001 22
WAGO IoT Box; MES; with Controller PFC200 (750-8212) 2854-099/000-002 23
WAGO IoT Box; Energy Data 4G; with Controller PFC200 (750-8217) 2854-099/000-003 24
WAGO IoT Box; MES 4G; with Controller PFC200 (750-8217) 2854-099/000-004 25
WAGO I/O System ‒ 750 and 753 Series
Safe Digital Input, 4 Channels; 24 VDC; PROFIsafe 750-661/000-004 / 753-661/000-004 26
Safe Digital Input, 8 Channels; 24 VDC; PROFIsafe 750-662/000-004 / 753-662/000-004 26
Safe Digital Input/Output, 4/2 Channels; 24 VDC; 10 A; PROFIsafe 750-666/000-004 27
Safe Digital Input/Output, 4/4 Channels; 24 VDC; 2 A; PROFIsafe 750-667/000-004 / 753-667/000-004 28
4-Channel Pulse-Width Modulation; 24 VDC; 0.2 A; 20 kHz 750-677 29
End Module; 8x N 750-600/000-001 30
WAGO I/O System ‒ 750 XTR Series
8-Channel Digital Input; 24 VDC; 3 ms; Low-Side Switching; 2-Wire Connection; Extreme 750-1417/040-000 32
8-Channel Digital Output; 24 VDC; 0.5 A; Low-Side Switching; 2-Wire Connection; Extreme 750-1516/040-000 33
4-Channel Analog Input; for Voltage/Current; Extreme 750-471/040-000 34
4-Channel Pulse-Width Modulation; 24 VDC; 0.2 A; 20 kHz; Extreme 750-677/040-000 35
Incremental Encoder Interface; RS-422; 32 Bits; Extreme 750-637/040-000 36
End Module; 8x N; Extreme 750-600/040-001 37
I/O System Field
1-Channel Analog Input; IO-Link Converter; 4 … 20 mA 765-2701/200-000 38
2-Channel Analog Input; IO-Link Converter; 0 … 10 V 765-2702/200-000 39
2-Channel Analog Output; IO-Link Converter; 4 … 20 mA 765-2703/200-000 40
2-Channel Analog Output; IO-Link Converter; 0 … 10 V 765-2704/200-000 41
1-Channel Analog Input; IO-Link Converter; Pt100/Pt1000; voltage 765-2705/200-000 42
1-Channel Analog Input; IO-Link Converter; Pt100/Pt1000; current 765-2706/200-000 42
Mounting Clip 765-101/000-000, 765-102/000-000 43
Industrial Switches
Industrial ECO Switch; 8 Ports 100Base-TX 852-112/000-001 44

Radio Technology
EnOcean® RS-485 Gateway; 868 MHz 750-940 46

Products highlighted in RED are new items for Spring 2022.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 3

 Volume 3, Section 1 | Solutions www.wago.com

WAGO Application Building Control

Buttons, contacts, Valve drives, lights,

presence detectors, shading drives, …
counters, …

Temperature, Valve actuators, …

humidity, air quality, …

WAGO Application Building Control is a pre-programmed software solution Advantages:

for building automation applications. • Easy configuration, commissioning and operation without programming
knowledge
• The application is ideal for virtually all building automation functions, such • Highly versatile
as lighting control, HVAC control, and energy data management. • High flexibility and scalability for adapting to different needs
• Despite pre-programming, it is possible to define almost any data points • Integrated monitoring, alarming for limit violation and status monitoring
that can be linked together, put into dependency with each other or provi- • Optional connection to WAGO’s “Cloud Building Operation and Control”
ded with control and regulating functions. cloud solution for access to all of the data from anywhere in the world
• The application has an integrated dashboard for advanced visualization
options. Benefits:
• Commissioning is performed through a configuration interface, following • High cost efficiency and profitability thanks to quick and easy commissi-
the design principle of “configuration instead of programming.” oning
• User-friendly and intuitive visualization and operation
• High functional safety and reliability thanks to pre-programmed and
tested functional units

Item Description Delivery type License certificate by email

Item No. (software available for download)

WAGO Application Building Control; Single License; Online For data sheet and additional
Activation
2759-2120/261-1000 information, see: wago.com/2759-2120/261-1000
Compatible Controllers
The “WAGO Application Building Control” software is a pre-programmed application
Controller PFC200; G2; 2ETH RS 750-8212 based on the e!COCKPIT Development Environment and can be used for PFC200 G2
Controllers.
A single license allows installation on one controller.
One license per controller is required. To download the application and license to the device, WAGOupload software is
required, which can be obtained free of charge from the WAGO homepage. Internet
connection may be required for license activation.

4 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 1 | Solutions

Configuration Screen

Data point catalog

• Central list of all configured data points (inputs, outputs, functions, dashboard elements)
• The input value, e.g., for a function or an output is selected from the data point list.
• Search function for finding the desired data point (helpful for long lists of larger applica-
tions)

Dashboard

The integrated dashboard offers a freely configurable visualization interface for the dis-
play of current system values and states and the possibility of operator interventions

WAGO Application Building Control

Supported I/O modules as interfaces for the connection of sensors and actuators Item No.
Quan-
Digital Input Modules
tity
The I/O modules (type and number) connected via
the local bus are automatically detected and dis- 10 2-Channel Digital Input; 230 VAC 750-405
played in the application for further configuration. 4-Channel Digital Input; 24 VDC; 3 ms 750-402
4-Channel Digital Input; 120/230 VAC 753-440
8-Channel Digital Input; 24 VDC; 3 ms 750-430
8-Channel Digital Input; 24 VDC; 3 ms; 2-Wire Connection 750-1415
16-Channel Digital Input; 24 VDC; 3 ms 750-1405
Analog Input Modules
10 2-Channel Analog Input; for Pt100/RTD Resistance Sensors 750-461
2-Channel Analog Input; 4 … 20 mA; Single-Ended 750-466
2-Channel Analog Input; 0 … 10 VDC; Single-Ended 750-467
4-Channel Analog Input; 4 … 20 mA; Single-Ended 750-455
4-Channel Analog Input; 0 … 10 VDC; Single-Ended 750-459
4-Channel Analog Input; Voltage/Current; Differential Input; 16 Bits; Diagnostics 750-471
8-Channel Analog Input; 0 … 10 VDC/±10 V; Single-Ended 750-497
Analog Temperature Input Modules
10 8-Channel Analog Input; Resistance Measurement; Adjustable 750-451
4-Channel Analog Input; Resistance Measurement; Adjustable 750-450
Digital Output Modules
10 4-Channel Digital Output; 24 VDC; 0.5 A 750-504
2-Channel Relay Output; 250 VAC; 1 A; Potential-Free; 2 Changeover Contacts 750-517
8-Channel Digital Output; 24 VDC; 0.5 A 750-530
8-Channel Digital Output; 24 VDC; 0.5 A; 2-Wire Connection 750-1515
16-Channel Digital Output; 24 VDC; 0.5 A 750-1504
Analog Output Modules
10 2-Channel Analog Output; 0 … 10 VDC 750-550
2-Channel Analog Output; 0 … 10 VDC; 10 Bits; 100 mW/24 V 750-560
4-Channel Analog Output; 0 … 10 VDC 750-559
8-Channel Analog Output; 0 … 10 VDC/±10 V 750-597
RS-232/485 Serial Interface Modules
4 Serial Interface RS-232/485 750-652
M-Bus Modules
4 M-Bus Master 753-649

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 5

 Volume 3, Section 1 | Solutions www.wago.com

WAGO Application Weather Station, Shadow Correction

Weather sensors
from different manufacturers

Weather station

ETHERNET

System distribution box

The “Shadow Correction” function extends the sun

position-dependent slat tracking and additionally
optimizes the supply of daylight in the rooms. It
takes the shading caused by surrounding buildings
and vegetation into account according to an
existing shading analysis for the specific property.
As a result, only the blinds that are actually in the
sun are adjusted to the sun's position. Blinds of the
shaded windows can be raised, or their slats can be
set in a horizontal position, to improve the supply of
sunlight in the room, increasing workplace comfort.

Note:
This is an additional function for the WAGO Appli-
cation Weather Station.
A license is required for productive use of the “Sha-
dow Correction” function without time restriction.
The full scope of this function can be used for
evaluation without a license for 30 days.
To download the license to the device, WAGOuplo-
ad software is required, which can be obtained free
of charge from the WAGO homepage.
Internet connection may be required for license
activation.

Item Description Delivery type License certificate by email

Item No. (software available for download)

Application Weather Station; Shadow Correction; Single For data sheet and additional
License; Online activation
2759-242/261-1000 information, see: wago.com/2759-242/261-1000
Compatible Controllers
The “Application Weather Station; Shadow Correction” software is a pre-programmed
Controller PFC200; G2; 2ETH RS 750-8212 application based on the e!COCKPIT Development Environment and can be used for
PFC200 G2 Controllers.
A single license allows installation on one controller.
One license per controller is required. To download the application and license to the device, WAGOupload software is
required, which can be obtained free of charge from the WAGO homepage. Internet
connection may be required for license activation.

6 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 1 | Solutions

WAGO Application Grid Gateway

Setting application parameters via HTML-5 WEB visualization Example: Grid Gateway Distribution Box

WAGO Grid Gateway Application supports power distribution grid operators Asset managers can more accurately plan substation maintenance cycles
in assessing the grid performance. This application allows grid opera- by accessing both stored data and digital drag indicators. Grid managers
tors to use their existing distribution grid more efficiently, while avoiding are prepared for local situations, having remote access for maintenance and
unnecessary grid expansion. The measurement technology required in the errors in the grid.
substation for both the transformer and low-voltage outputs can be easily Remote updates for software modules and extensions are possible, eliminat-
retrofitted. ing unnecessary in-the-field service.
Upon request, WAGO will provide you a hardware solution tailored to your
The measurement values of the medium voltage, transformer, low-voltage customers’ substations.
outputs, valve positions and temperatures are transmitted to the grid control
system via IEC 60870-5-104. Commands and setpoints can also be received Patch and device management is available for the administration of a large
and processed. External measurement systems such as short-circuit/ number of distributed telecontrol devices with the WAGO Application Grid
ground-fault direction indicators can be easily parametrized via Modbus Gateway. This enables application updates, configuration changes, security
RTU. The entire parameterization can be stored in a clear manner and, if patches and firmware upgrades, among other things.
necessary, added to other stations. The option of simulating measured data
makes it possible to commission new substations at the station builder’s
location from the grid control system without the field side being connected.

All data, for example the measured values from the low-voltage outputs, can
be communicated via MQTT to a cloud.

Item Description Technical Data

Item No. Number of LV outputs Up to 17 LV outputs
Application Grid Gateway; Single License; Firmware Hardening in compliance with BDEW White
2759-2015/261-1000 Paper
Online activation
Application Grid Gateway; Single License 2759-2015/260-1000 Patch/device management Application updates, configuration
changes, security patches and firmware
Accessories
upgrades
Custom/tailored system distribution boxes (e.g., for use in
upon request Communication to the grid control IEC 60870-5-104
substations) are available
system
Compatible devices
Communication to the office network HTTPS, MQTT
PFC200; G2; 4ETH 750-8210
Memory required on the SD card Less than 2 MB measurement data per day
PFC200; G2; 4ETH; T 750-8210/025-000 for 15 LV outputs
PFC200; G2; 4ETH; XTR 750-8210/040-000 Authentication Local, LDAP
PFC200; G2; 2ETH 2SFP 750-8211 User groups Grid manager, grid technician, grid planner,
PFC200; G2; 2ETH 2SFP; XTR 750-8211/040-000 asset manager, administrator
PFC200; G2; 2ETH RS 750-8212 Network interfaces Secure separation between SCADA and
office networks
PFC200; G2; 2ETH RS; TELE; T 750-8212/025-001
Delivery type License certificate by email (software
PFC200; G2; 2ETH RS; TELE; T; ECO 750-8212/025-002 available for download)
PFC200; G2; 2ETH RS; XTR 750-8212/040-000 Data sheet and
PFC200; G2; 2ETH RS; Tele; XTR 750-8212/040-001 additional information, see: wago.com/2759-2015/261-1000
PFC200; G2; 2ETH M12; RS; XTR 750-8212/040-010
PFC200; G2; 2ETH RS; 4G 750-8217 An Internet connection to the PC that's equipped with e!COCKPIT is required for online
license activation.
PFC200; G2; 2ETH RS; 4G; T 750-8217/025-000 A single license allows installation on one controller.
One license per controller is required.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 7

 Volume 3, Section 2 | Software www.wago.com

Runtime Software
e!RUNTIME; BACnet/IP
Function: Benefits:
“Building Automation and Control Networks” (BACnet) is a data transfer • Use the device as a BACnet Building Controller (B-BC)
protocol for building automation that simplifies communication between • Control and detect distributed I/O signals from WAGO BACnet/IP Couplers
products from different manufacturers. via BACnet® Fieldbus Protocol
The PFC200 Controller (2nd generation), WAGO Touch Panel or Edge • Data exchange with other BACnet® Devices as a BACnet® Client or Server
Controller can be operated as a BACnet building controller and supports
the B-BC device profile with all major BACnet objects and interoperability Use:
building blocks (BIBBs). Enter the license into e!COCKPIT, assign it to a device and load both the li-
The device communicates via BACnet/IP and offers the functionality of a cense and project into the controller. No other installation steps are required.
BACnet® Client and BACnet® Server.
Technical Data:
To use BACnet/IP, it is necessary to equip the device with a license. See “Protocol Implementation Conformance Statement” (PICS)

The BACnet® network is configured via WAGO BACnet® Configurator and

e!COCKPIT Engineering Software.

Web-Visu B-OWS
BACnet Management
Congurator Station

BACnet
ETHERNET
Touch Panels 600;
PFC200 (2nd Generation) Control Panel BACnet Fieldbus Coupler
Edge Controller

1 2 3 4 5 6 7 8
ON
PLC PLC PLC
e!RUNTIME;
e!RUNTIME; BACnet/IP; 600
BACnet/IP; 300 e!RUNTIME;
BACnet/IP; 600

Item Description Minimum firmware version Firmware (18)

e!RUNTIME; BACnet/IP; 300; S; up to 48 BACnet® objects Item No. Minimum e!COCKPIT version V1.8
Single License; Online Activation 2759-2273/211-1000 Delivery type Licence certificate via email (e!COCKPIT
Compatible Controllers already contains the software itself)

PFC200; G2; 4ETH 750-8210 For data sheet and additional wago.com/2759-02273/211-1000
information, see: wago.com/2759-02276/211-1000
PFC200; G2; 2ETH 2SFP 750-8211
PFC200; G2; 2ETH RS 750-8212
An Internet connection to the PC that’s equipped with e!COCKPIT may be required for
PFC200; G2; 2ETH CAN 750-8213 license activation.
PFC200; G2; 2ETH RS CAN DPS 750-8216 A single license allows installation on one device.
One license per device is required.
PFC200; G2; 2ETH RS; 4G 750-8217
BACnet® is a registered trademark of the American Society of Heating, Refrigerating
Item Description and Air Conditioning Engineers, Inc. (ASHRAE).
e!RUNTIME; BACnet/IP; 600; S; up to 48 BACnet® objects Item No.
Single License; Online Activation 2759-2276/211-1000
Compatible Devices
Hardware Config- Touch Panel 600 Standard Line 762-43xx/8000-002
uration PIO 3 Touch Panel 600 Advanced Line 762-53xx/8000-002
Touch Panel 600 Marine Line 762-63xx/8000-002
WAGO Edge Controllers 752-8303/8000-002

Besides the basic controller variants listed here, the license can also be used on
these controllers’ variants (PFC200 XTR .../040-000; extended temperature range
.../025-xxx and telecontrol technology .../xxx-001 and -002). For details, see the product
information of the corresponding controller.

8 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 2 | Software

Runtime Software
e!RUNTIME; OPC UA Server Extended
Function: By default, WAGO controllers use the “PLCopen” information model to pro-
“OPC Unified Architecture” (OPC UA) is a platform-independent and ser- vide data for other applications. The OPC UA Mapping Editor can be used to
vice-oriented architecture. It is used to describe and transport data. Because map this information model to any other OPC UA model, for example, to OPC
the services are independent, devices from different manufacturers can be UA base models such as “Robotics” or “Euro-map77”.
interconnected.
To use other, arbitrary information models, it is necessary to equip the
The OPC UA server can release PFC200 Series, Touch Panel 600 and Edge device with a license.
Controller runtime data to a product in the network when it meets the re-
quired preconditions. The device must have an ETHERNET interface that can Mapping to other, arbitrary information models is performed via the WAGO
be used for communication and have the memory capacity and processing OPC UA Mapping Editor.
time required by the server.
Benefits:
The “OPC UA Server Extended” license activates an extended range of Mapping the “PLCopen” information model to any other information models
functions for the OPC UA server.

Extended functional range:

Mapping the “PLCopen” information model to any other information model.

Item Description Minimum firmware version Firmware (18) Patch 3

e!RUNTIME; OPC UA Server Extended; 300 Item No. Minimum e!COCKPIT version V1.9
Single License; Online Activation 2759-2233/211-1000 Delivery type License certificate per email
Compatible Controllers For data sheet and additional wago.com/2759-2233/211-1000
PFC200; G2 750-821x/xxxx-xxxx information, see: wago.com/2759-2236/211-1000
Item Description
Item No. An Internet connection to the PC that’s equipped with e!COCKPIT may be required for
e!RUNTIME; OPC UA Server Extended; 600
license activation.
Single License; Online Activation 2759-2236/211-1000
A single license allows installation on one device.
Compatible Devices
Every additional device requires its own license.
Hardware Config- Touch Panel 600 Standard Line 762-43xx/8000-002
uration PIO 3 Touch Panel 600 Advanced Line 762-53xx/8000-002 OPC UA is a registered trademark of the OPC Foundation.
Touch Panel 600 Marine Line 762-63xx/8000-002
Hardware Config- Touch Panel 600 Standard Line*) 762-42xx/8000-001
uration PIO 2 Touch Panel 600 Advanced Line*) 762-52xx/8000-001
Touch Panel 600 Marine Line*) 762-62xx/8000-001
WAGO Edge Controller 752-8303/8000-002

xx is a wildcard; the license applies to all Touch Panel sizes.

*) The prerequisite for using the OPC UA Server Extended is the license equipment of
the device with a PLC license as Control Panel.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 9

 Volume 3, Section 2 | Software www.wago.com

OPC UA Mapping Editor

Functions: Operation on the controller requires an “Extended” e!RUNTIME license for

The OPC UA Mapping Editor for WAGO’s Linux®-based controllers offers the WAGO OPC UA Server (2759-2233/211-1000 or 2759/2236/211-1000)
even greater flexibility for leveraging the benefits of OPC UA communication. on the device. Mapping Editor, which is creates the information model, is free
These “companion specifications” have been defined to cope with the de- of charge.
mands of different industries having similar products and machines. These
specifications primarily describe information models. Benefits:
The OPC UA Mapping Editor allows you to modify the information model that • Adaptation of the information model provided by the OPC UA Server to any
specifies how the WAGO OPC UA server provides the data; you can also map information model
the data onto any information model. For this purpose, a symbol configura- • Flexible use of OPC UA
tion is generated with e!COCKPIT. After the symbol configuration is loaded,
the variables are mapped to the newly created information model. Once the Use:
resulting mapping is loaded onto the controller, it’s easy to implement OPC The OPC UA Mapping Editor has been developed for use on Windows
UA communication for different applications and performance demands. 10-based systems.
Customer-specific adaptations are also possible, even if they don’t corre-
spond to any particular specification.

Item Description System Requirements

OPC UA Mapping Editor Operating system Windows 10
Download: www.wago.com Memory 4 GB
Supported Controllers Item No. Free hard disk space 800 MB
2nd Generation PCF200 750-821x Processor Dual-core CPU
TP600 Control Panels 752-430x Screen resolution Minimum: 1,366 x 768 pixels
Edge Controller 752-8303/8000-002 Recommended: 1,920 x 1,080 pixels
Minimum e!COCKPIT version V1.9 or higher
Minimum firmware version FW18 patch 3
Delivery type Download

OPC UA Mapping Editor is free of charge. However, running it on a controller requires an

“Extended “ e!RUNTIME-license for the WAGO OPC UA Server.

10 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 2 | Software

Runtime Software
e!RUNTIME; IEC 60870 Master L

SCADA

1 2 3 4 5 6 7 8
IEC 60870-5

ON
-101/-103/-104
Master

IEC 60870-5-104 IEC 60870-5-101

ETHERNET ETHERNET

IEC 60870-5-103

Function: Your Benefits:

The parameters for communication per the IEC 60870 Protocol can be set • Use the controller as a telecontrol master to read data from IEC-60870-5-
with a configurator integrated into the e!COCKPIT Software. 101/-104 Field Devices or IEC-60870-5-103 Protection Devices (slaves)
The configurator sets up IEC 60870 objects while configuring data exchange and process it locally in the controller.
to the PLC application or I/O modules. Import and export functions in CSV • Create a gateway application to use this master function to forward read
format allow configured data to be transmitted to other engineering tools. data to a higher-level control system or cloud. This may require additional
With this license, the IEC 60870-5-101, -103 and -104 Protocols can be software licenses, such as the WAGO IEC 60870 Slave, DNP 3 Slave, Spark-
activated on the master. This permits the creation of gateways that convert plug or WAGO Cloud.
one protocol into another, e.g., allowing protection devices to be read out via
IEC 60870-5-103 and data to be transmitted to the network control system Use:
via IEC 60870-5-104. Enter the license into e!COCKPIT, assign it to a device and load both the li-
cense and project into the controller. No other installation steps are required.
IEC 60870-101/-104 Information Objects can be used to monitor the
direction of single, double and step messages – bit patterns, counter values, Technical Data:
as well as normalized, scaled and floating-point measurement values can See Section “Functionality of the WAGO Protocol Library according to
also be used. All information objects can be received with or without a time IEC 60870-5-101, and -104” in Product Manual “Planning the IEC 60870
stamp. This also applies to information objects in the control direction. Protocol with the Telecontrol Configurator and e!COCKPIT.”

The IEC 60870-5 Master L can support connections to up to 16 IEC 60870-5

Slave Devices.

Item Description Minimum e!COCKPIT version V1.9

e!RUNTIME; IEC 60870 Master L Item No. Delivery type Licence certificate via email (e!COCKPIT
Single License; Online Activation 2759-296/211-1000 already contains the software itself)
Compatible Devices For data sheet and additional
Hardware Config- Touch Panel 600 Standard Line 762-43xx/8000-002 information, see: wago.com/2759-296/211-1000
uration PIO 3 Touch Panel 600 Advanced Line 762-53xx/8000-002
An Internet connection to the PC that‘s equipped with e!COCKPIT may be required for
Touch Panel 600 Marine Line 762-63xx/8000-002
license activation.
Hardware Config- Touch Panel 600 Standard Line 762-42xx/8000-001 A single license allows installation on one device.
uration PIO 2 Touch Panel 600 Advanced Line 762-52xx/8000-001 Every additional device requires its own license.
Touch Panel 600 Marine Line 762-62xx/8000-001
WAGO Edge Controller 752-8303/8000-002

xx is a wildcard; the license applies to all Touch Panel sizes.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 11

 Volume 3, Section 2 | Software www.wago.com

Runtime Software
e!RUNTIME; IEC 61850 Client L

SCADA

ETHERNET

IEC 61850
Client

Modbus®

DNP3

IEC 60870-5-103

IEC 61850 Server

IEC 61850 GOOSE

Protection Relay

Function: Your Benefits:

The parameters for communication per the IEC 61850 Protocol can be set • Use the controller as a telecontrol master (client) to read data from IEC
with a configurator integrated into the e!COCKPIT Software. 61850 Protection Devices (servers) and process it locally in the controller.
• Create a gateway application to use this client function to forward read data
The configurator sets up the reading of IEC 61850 object data from pro- to a higher-level control system or cloud. This may require additional soft-
tection devices, for example. If the configuration of the third-party device ware licenses, such as the WAGO IEC 60870 Slave, DNP 3 Slave, Sparkplug
is available in IEC-61850 SCL exchange format, it can be read in using the or WAGO Cloud.
configurator’s import functions. Alternatively, it is also possible to read the
configuration from the third-party device using the configurator’s online Use:
browsing function. Enter the license into e!COCKPIT, assign it to a device and load both the
license and project into the device. No other installation steps are required.
With this license, the IEC 61850 Protocol can be activated on the client. This
permits the creation of gateways that convert one protocol into another, Technical Data:
e.g., allowing protection devices to be read out via IEC 61850 and data to be See Product Manual “Planning the IEC 61850 Protocol with the Telecontrol
transmitted to the network control system via IEC 60870-5-104. Configurator and e!COCKPIT.”

The IEC 61850 Client L processes data from up to four servers with each 10
requests.

Item Description Minimum e!COCKPIT version V1.9

e!RUNTIME; IEC 61850 Client L Item No. Delivery type Licence certificate via email (e!COCKPIT
Single License; Online Activation 2759-2246/211-1000 already contains the software itself)
Compatible Devices For data sheet and additional
Hardware Config- Touch Panel 600 Standard Line 762-43xx/8000-002 information, see: wago.com/2759-2246/211-1000
uration PIO 3 Touch Panel 600 Advanced Line 762-53xx/8000-002
An Internet connection to the PC that’s equipped with e!COCKPIT may be required for
Touch Panel 600 Marine Line 762-63xx/8000-002
license activation.
Hardware Config- Touch Panel 600 Standard Line 762-42xx/8000-001 A single license allows installation on one device.
uration PIO 2 Touch Panel 600 Advanced Line 762-52xx/8000-001 Every additional device requires its own license.
Touch Panel 600 Marine Line 762-62xx/8000-001
WAGO Edge Controller 752-8303/8000-002

xx is a wildcard; the license applies to all Touch Panel sizes.

12 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 2 | Software

Runtime Software
e!RUNTIME; DNP3 Master L

SCADA

ETHERNET

DNP3
ETHERNET or Serial

Function: Your Benefits:

The DNP3 Configurator is part of the e!COCKPIT Software. With this license, • Use of the controller as a DNP3 Master to read and process data from DNP3
the DNP3 Protocol can be activated on the master. The configurator fully Slaves (field devices) via TCP, UDP or serially.
supports the DNP3-specific functions of all WAGO telecontrollers. • Create a gateway application to transfer data from DNP3 Slaves (field devices)
The configurator sets up DNP3 objects while configuring data exchange to and other protocols (e.g., IEC 60870, Modbus®).
the PLC application or I/O modules. As an alternative to manually configur-
ing connections to DNP3 Slaves, it is also possible to use a description file Use:
to import the configurations in the standard DNP3 XML device profile format. Enter the license into e!COCKPIT, assign it to a device and load both the
license and project into the device. No other installation steps are required.
In performance class L, the master can maintain connections for up to four
DNP3 Slaves, thereby working as TCP or serial DNP3 Master. Up to 10,000 Technical Data:
events from connected DNP3 Slaves can be saved in the controller’s internal See the document “e!RUNTIME DNP3 Master Device Profile” on www.wago.
RAM or on the SD card. com.

In the monitoring direction, the WAGO DNP3 Master L can receive digital,
analog and count values from the slave. Both digital and analog values can
be sent in the control direction. Analog values can be processed in 16-bit,
32-bit or FLOAT format. Count values can be processed in 16-bit or 32-bit
format.

Item Description Minimum e!COCKPIT version V1.9

e!RUNTIME; DNP3 Master L Item No. Delivery type Licence certificate via email (e!COCKPIT
Single License; Online Activation 2759-2296/211-1000 already contains the software itself)
Compatible Devices For data sheet and additional
Hardware Config- Touch Panel 600 Standard Line 762-43xx/8000-002 information, see: wago.com/2759-2296/211-1000
uration PIO 3 Touch Panel 600 Advanced Line 762-53xx/8000-002
An Internet connection to the PC that‘s equipped with e!COCKPIT may be required for
Touch Panel 600 Marine Line 762-63xx/8000-002
license activation.
Hardware Config- Touch Panel 600 Standard Line 762-42xx/8000-001 A single license allows installation on one device.
uration PIO 2 Touch Panel 600 Advanced Line 762-52xx/8000-001 Every additional device requires its own license.
Touch Panel 600 Marine Line 762-62xx/8000-001
WAGO Edge Controller 752-8303/8000-002

xx is a wildcard; the license applies to all Touch Panel sizes.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 13

 Volume 3, Section 3 | Operation and Monitoring www.wago.com

Surface-Mounted Housing for Touch Panel 600; Visu Panel

Item Description Surface-Mounted Housing for Touch Panel 600; 25.7 cm (10.1"); 52.5 mm; Visu Panel

Item No. 762-9214

Technical Data

Dimensions W x H x D (mm) 292.8 x 222.6 x 52.5

Weight 1300 g

Item Description Surface-Mounted Housing for Touch Panel 600; 39.6 cm (15.6"); 52.5 mm; Visu Panel

Item No. 762-9215

Technical Data

Dimensions W x H x D (mm) 420 x 282 x 52.5

Weight 2500 g

14 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

 www.wago.com Volume 3, Section 3 | Operation and Monitoring

Surface-Mounted Housing for Touch Panel 600; Control Panel

Item Description Surface-Mounted Housing for Touch Panel 600; 25.7 cm (10.1"); 72.0 mm; Control Panel

Item No. 762-9314

Technical Data

Dimensions W x H x D (mm) 292.8 x 222.6 x 72

Weight 1600 g

Item Description Surface-Mounted Housing for Touch Panel 600; 39.6 cm (15.6"); 72.0 mm; Control Panel

Item No. 762-9315

Technical Data

Dimensions W x H x D (mm) 420 x 282 x 72

Weight 3000 g

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 15

 Volume 3, Section 4 | Edge Computing www.wago.com

Edge Computer; 4 x ETHERNET, 4 x USB, HDMI, DP; 16 GB RAM, 256 GB Flash

Power supply 4 x USB host

24 VDC (10 … 36 V)
4 x ETHERNET RJ-45
Power On

• 4 ETHERNET interfaces for connecting to field devices and IT network

• 4 USB ports for the optional connection of a USB stick, mouse or keyboard
• HDMI and display port interfaces for connecting a display

Item Description Edge Computer; 4 x ETHERNET, 4 x USB, HDMI, DP; 16 GB RAM, 256 GB Flash
Item No. 752-9800
Order Text EPC; 4ETH, 4USB, HDMI, DP; 16GB RAM, 256GB Flash

Technical Data
Communication Web browser
Visualization Web server
ETHERNET protocols DHCP; DNS; HTTP; HTTPS; SSH; SCP; SFTP
Operating system Debian Linux 10.9
Processor Intel® i7-7600U 2.8 GHz (max. 3.90 GHz)
Main memory (RAM) 16 GB; DDR4 2133 MHz
Internal memory (flash) 256 GB; SATA 2.5“ SSD
Memory expansion Full-size mPCIe slot;
Drive slot for one 2.5" SSD HDD memory card (height 9.5 mm)
RTC (Real-Time Clock) Battery type BR2032; 3 VDC
Connection technology: communication/fieldbus ETHERNET: 4 x RJ-45 1000BASE-T
Baud rate ETHERNET: 10/100/1000 Mbit/s
Interfaces 4 x USB 3.0 (Type A);
1 x HDMI v1.4, 1920 x 1080p @60Hz;
1 x DisplayPort 1.2, 2560 x 440p
Indicators 3 LEDs
Power supply 24 VDC (10 … 36 V)
Input current (24 V) 2292 mA typ.; 3967 mA max.
Operating power 55 W typ.; 95.2 W max.
Dimensions (W x H x D) 45 x 200 x 140 mm
Weight 1810 g
Housing material Aluminum, powder-coated
Mounting type DIN-35-rail mount
Surrounding air temperature (operation) -20 … +60 °C
Surrounding air temperature (storage) -40 … +85 °C
Protection type IP40
Relative humidity (without condensation) 95 %
Approvals 1*, FCC*, UL*; *pending

16 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 4 | Edge Computing

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 17

 Volume 3, Section 5 | Controllers www.wago.com

Compact controller ▶ 2 x ETHERNET, RS-485; 8DI, 4DO, 2Ai, 2AO, 2NI1K/PT1K

Supply voltage (field) RTD inputs
Serial interface Digital inputs Analog inputs

D+ D- GNDRS SHRS Uout+GND DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 PT1+ PT1- PT2+ PT2- AI1 GND AI2 GND

1 2 3 4 1 2 3 4 5 6 7 8 9 10 1 2 3 4 1 2 3 4
X11 X12 X13 X14
microSD card slot
µSD

w I/O System Compact DI1 DI2 DI3 Di4 DI5 DI6 DI7 DI8

Compact Controller 100 RUN

Item-No.: 751-9301 STOP
SYS RUN USR
LNK LNK
µSD
RESET
ACT1 ACT2

DO1 DO2 DO3 DO4

CONFIG

X3 RST

X1 X4 X5 X6
1 2 1 2 3 4 5 6 7 8 9 10 1 2 3 4

X2
ETHERNET US+ GND Uin+ 0V DO1 0V DO2 0V DO3 0V DO4 0V AO1 GND AO2 GND

Fieldbus connection Supply voltage (field) Analog outputs

2 x RJ-45
Supply voltage (system) Digital outputs
751-9301

Version Standard
Item no. 751-9301
Order text Compact Controller 100

Technical data
Communication Modbus (TCP, UDP); Modbus® RTU; RS-485 interface
ETHERNET protocols DHCP; DNS; NTP; FTP; FTPS; SNMP; HTTP; HTTPS; SSH
Visualization Web-Visu
Programming environment CODESYS V3.5
CPU Cortex A7; 650 MHz
Operating system Real-time Linux (with RT-Preempt patch)
Main memory (RAM) 512 MB
Internal memory (flash) 4096 MB
Non-volatile hardware memory 128 kB
Data memory 128 MB
Program memory 32 MB
Non-volatile software memory 128 kB
Supply voltage (system) 24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Supply voltage (field) 24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (system) max. 500 mA
Current consumption (field) max. 2000 mA
Signal type Voltage; Resistance measurement
Number of digital inputs 8
Input characteristic Type 3 (per EN 61131-2)
Number of digital outputs 4
Output current (per channel) 500 mA (DC)
Output current short-circuit-protected
Signal type (voltage) 0 … 10 VDC
Number of analog inputs 2
Resolution of analog inputs 16 bits
Number of analog outputs 2
Resolution of analog outputs 12 bits
Load impedance (voltage output) ≥ 5 kΩ
Number of measurement inputs 2
Temperature range −60 °C … 350 °C, PT1000, Ni1000
Ambient temperature (operation) -25 … +60 °C
Approvals 1; UKCA; r OrdLoc
For data sheet and additional information, see: wago.com/751-9301
Accessories Item no.
Memory Card SD Micro; 2 GByte 758-879/000-3102
Memory Card SD Micro; pSLC-NAND; 8 GB; Temperature 758-879/000-3108
range: -40 to 90°C

18 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 5 | Controllers

Controller PFC200 ▶ 2 x ETHERNET, RS-232/-485, Mobile Radio Module

Marking area
Status
01 02 voltage supply
Serial SYS RST A -System
interface CON B
-Power jumper contacts
RUN C

X3 RS232/485
D

I/O Data contacts

24V 0V
MS Supply voltage
(system)
WDS NS 24 V
NET USR 0V
+ +
SD
Supply voltage
(field)
24 V

750-8217/600-000
Fieldbus
connection — —
RJ-45

ACT X2 LNK ETH ACT X1 LNK

0V
Fieldbus SIM
connection
RJ-45 ANT
RUN
STOP
RESET

Power jumper contacts

Service interface
750-8217

ext. temperature
Item no. 750-8217/600-000 750-8217/625-000
Order text PFC200; 2ETH RS 4G; Global PFC200; 2ETH RS 4G; Global; T

Technical Data
Communication Modbus (TCP, UDP); ETHERNET; EtherNet/IPTM Adapter (slave), library for e!RUNTIME; Modbus® RTU; RS-232 serial
interface; RS-485 interface; MQTT; BACnet/IP, requires an additional license; EtherCAT® master (requires an addi-
tional license); Telecontrol protocols (requires an additional license on the device)
ETHERNET protocols DHCP; DNS; NTP; FTP; FTPS; SNMP; HTTP; HTTPS; SSH
Telecontrol protocols IEC 60870-5-101/-103/-104 (additional license as slave or master); IEC-61850 (additional license as Client 300); DNP3
(additional license as Slave or Master 300)
Radio technology GSM/Edge/UMTS/HSPA+; LTE
Frequency band GSM: B2/B3/B5/B8; WCDMA: B1/B2/B4/B5/B6/B8/B19; LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/ B19/B20/B25/
B26/B28; LTE-TDD: B38/B39/B40/B41
Services GPRS connection to Internet
Security encryption OpenVPN, IPsec, firewall
Visualization Web-Visu
Programming environment e!COCKPIT (based on CODESYS V3)
CPU Cortex A8; 1 GHz
Operating system Real-time Linux (with RT-Preempt patch)
Main memory (RAM)/internal memory (flash)/non-vola- 512 MB / 4 GB / 128 KB
tile memory (hardware)
Program memory/data memory/non-volatile memory e!RUNTIME: 32 MB / 128 MB / 128 KB
(software)
Number of modules per node (max.) 250
Input and output process image (internal) max. 1000 words/1000 words
Input and output process image (Modbus®) max. e!RUNTIME: 32000 words/32000 words
Supply voltage (system) 24 VSELV/PELV DC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection)
Supply voltage (field) 24 VSELV/PELV DC (-25 … +30 %); via power jumper contacts
Input current (typ.) at nominal load (24 V) 550 mA
Total current (system supply) 700 mA
Ambient temperature (operation) 0 … +55 °C -20 … +60 °C
Dimensions W x H x D (102.5 x 100 x 71.9) mm
Approvals 1; Marine; r OrdLoc
For data sheet and additional information, see: wago.com/750-8217/600-000
Product Expansions Item no. Item no.
e!RUNTIME; BACnet; 300; Single License 2759-283/211-1000 2759-283/211-1000
e!RUNTIME; EtherCAT Master; 300; Single License 2759-263/211-1000 2759-263/211-1000
e!RUNTIME; DNP3 Master; 300; Single License 2759-2293/211-1000 2759-2293/211-1000
e!RUNTIME; IEC60870 Slave; Single License 2759-290/211-1000 2759-290/211-1000
e!RUNTIME; DNP3 Slave; Single License 2759-2290/211-1000 2759-2290/211-1000
e!RUNTIME; IEC60870 Master; 300; Single License 2759-293/211-1000 2759-293/211-1000
e!RUNTIME; IEC61850 Client; 300; Single License 2759-2243/211-1000 2759-2243/211-1000
Accessories Item no. Item no.
Memory Card SD; SLC-NAND; 2 GByte; Temperature 758-879/000-001 758-879/000-001
from -40 to 90 °C
Memory Card SD; pSLC-NAND; 8 GB; Temperature 758-879/000-2108 758-879/000-2108
range: -40 to 90°C
Magnetic foot antenna; with 2.5m cable and SMA plug; 758-975 758-975
GSM/ UMTS/ LTE/ Bluetooth®/ WLAN; 698-960, 1400-
1518, 1710-2700 MHz

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 19

 Volume 3, Section 5 | Controllers www.wago.com

Controller PFC200 XTR ▶ 2 x ETHERNET, RS-232/-485

Marking field
Status of the
01 02 operating voltage
Serial U6 SYS RST A -System
interface B
-Power contacts
U5 RUN C

X3 RS232/485
D
U4 I/O 24V 0V
Data contacts
U3 MS Supply
U2 NS 24 V
U1 U7 0V
+ +
SD Supply via
power contacts
24 V

750-8212/040-000
Fieldbus connection
RJ-45 — —

ACT X2 LNK ETH ACT X1 LNK

0V
Fieldbus connection
RJ-45
RUN
STOP
RESET

Power jumper contacts

Service interface
750-8212/040-000

Version extreme Telecontrol technology; extreme

Item no. 750-8212/040-000 750-8212/040-001
Order text PFC200; G2; 2ETH RS; XTR PFC200; G2; 2ETH RS; Tele; XTR

Technical Data
Communication Modbus (TCP, UDP); ETHERNET; EtherNet/IPTM Adapter Modbus (TCP, UDP); ETHERNET; EtherNet/IPTM Adapter
(slave), library for e!RUNTIME; Modbus® RTU; RS-232 se- (slave), library for e!RUNTIME; Modbus® RTU; RS-232 se-
rial interface; RS-485 interface; MQTT; EtherCAT® master rial interface; RS-485 interface; MQTT; EtherCAT® master
(requires an additional license); BACnet/IP, requires an (requires an additional license); BACnet/IP, requires an
additional license additional license; Telecontrol protocols
ETHERNET protocols DHCP; DNS; NTP; FTP; FTPS; SNMP; HTTP; HTTPS; SSH
Telecontrol protocols — IEC 60870-5-101/-103/-104; IEC 61400-25; IEC 61850-7;
DNP3
Visualization Web-Visu
Programming environment e!COCKPIT (based on CODESYS V3); WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
CPU Cortex A8; 1 GHz
Operating system Real-time Linux (with RT-Preempt patch)
Main memory (RAM)/internal memory (flash)/non-vola- 512 MB / 4 GB / 128 KB
tile memory (hardware)
Program memory/data memory/non-volatile memory CODESYS V2: 16 MB / 64 MB / 128 KB; e!RUNTIME: 32 MB / 128 MB / 128 KB
(software)
Number of modules per node (max.) 64
Input and output process image (internal) max. 1000 words/1000 words
Input and output process image (Modbus®) max. CODESYS V2: 1000 words/1000 words; e!RUNTIME: 32000 words/32000 words
Supply voltage (system) 24 VDC; via pluggable connector (CAGE CLAMP® connection); Derating must be observed!
Supply voltage (field) 24 VDC; Power supply via pluggable connector (CAGE CLAMP® connection); Transmission via power jumper contacts;
Derating must be observed!
Derating Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 … +30 %);
for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %);
Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Input current (typ.) at nominal load (24 V) 550 mA
Total current (system supply) 1700 mA
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (78.6 x 100 x 71.9) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-8212/040-000
Product Expansions Item no. Item no.
e!RUNTIME; BACnet; 300; Single License 2759-283/211-1000 2759-283/211-1000
e!RUNTIME; EtherCAT Master; 300; Single License 2759-263/211-1000 2759-263/211-1000
e!RUNTIME; DNP3 Master; 300; Single License 2759-2293/211-1000 —
e!RUNTIME; IEC60870 Slave; Single License 2759-290/211-1000 —
e!RUNTIME; DNP3 Slave; Single License 2759-2290/211-1000 —
e!RUNTIME; IEC60870 Master; 300; Single License 2759-293/211-1000 —
e!RUNTIME; IEC61850 Client; 300; Single License 2759-2243/211-1000 —
Accessories Item no. Item no.
Memory Card SD; SLC-NAND; 2 GByte; Temperature 758-879/000-001 758-879/000-001
from -40 to 90 °C
Memory Card SD; pSLC-NAND; 8 GB; Temperature 758-879/000-2108 758-879/000-2108
range: -40 to 90°C

20 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 5 | Controllers

Controller PFC200 XTR ▶ 2 x ETHERNET, RS-232/-485, CAN, CANopen, PROFIBUS slave

Fieldbus connection Fieldbus connection Serial
PROFIBUS CAN, CANopen interface
Marking field
Status of the
01 02
operating voltage
BF SYS RST A -System
B
-Power contacts

X5 PROFIBUS
DIA RUN

X3 RS232/485
C

X4 CAN
D
U4 I/O 24V 0V Data contacts
U3 MS
Supply
U2 NS 24 V
U1 CAN 0V
+ +
SD
Supply via

750-8216/040-000
power contacts
24 V

— —

ACT X2 LNK ETH ACT X1 LNK

0V

RUN
STOP
RESET

Power jumper contacts

Fieldbus connection Fieldbus connection Service interface

RJ-45 RJ-45
750-8216/040-000

Version extreme
Item no. 750-8216/040-000
Order text PFC200; G2; 2ETH RS CAN DPS; XTR

Technical Data
Communication PROFIBUS; Modbus (TCP, UDP); ETHERNET; CANopen; EtherNet/IPTM Adapter (slave), library for e!RUNTIME; Modbus®
RTU; RS-232 serial interface; RS-485 interface; MQTT; EtherCAT® master (requires an additional license); BACnet/IP,
requires an additional license
ETHERNET protocols DHCP; DNS; NTP; FTP; FTPS; SNMP; HTTP; HTTPS; SSH
Visualization Web-Visu
Programming environment e!COCKPIT (based on CODESYS V3); WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
CPU Cortex A8; 1 GHz
Operating system Real-time Linux (with RT-Preempt patch)
Main memory (RAM)/internal memory (flash)/non-vola- 512 MB / 4 GB / 128 KB
tile memory (hardware)
Program memory/data memory/non-volatile memory CODESYS V2: 16 MB / 64 MB / 128 KB; e!RUNTIME: 32 MB / 128 MB / 128 KB
(software)
Number of modules per node (max.) 64
Input and output process image (internal) max. 1000 words/1000 words
Input and output process image (Modbus®) max. CODESYS V2: 1000 words/1000 words; e!RUNTIME: 32000 words/32000 words
Input and output process image (PROFIBUS) max. 244 bytes/244 bytes
Input and output process image (CAN) max. 2000 words/2000 words
Supply voltage (system) 24 VDC; via pluggable connector (CAGE CLAMP® connection); Derating must be observed!
Supply voltage (field) 24 VDC; Power supply via pluggable connector (CAGE CLAMP® connection); Transmission via power jumper contacts;
Derating must be observed!
Derating Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 … +30 %);
for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %);
Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Input current (typ.) at nominal load (24 V) 550 mA
Total current (system supply) 1700 mA
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (112 x 100 x 71.9) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-8216/040-000
Product Expansions Item no.
e!RUNTIME; BACnet; 300; Single License 2759-283/211-1000
e!RUNTIME; EtherCAT Master; 300; Single License 2759-263/211-1000
e!RUNTIME; DNP3 Master; 300; Single License 2759-2293/211-1000
e!RUNTIME; IEC60870 Slave; Single License 2759-290/211-1000
e!RUNTIME; DNP3 Slave; Single License 2759-2290/211-1000
e!RUNTIME; IEC60870 Master; 300; Single License 2759-293/211-1000
e!RUNTIME; IEC61850 Client; 300; Single License 2759-2243/211-1000
Accessories Item no.
Memory Card SD; SLC-NAND; 2 GByte; Temperature 758-879/000-001
from -40 to 90 °C
Memory Card SD; pSLC-NAND; 8 GB; Temperature 758-879/000-2108
range: -40 to 90°C

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 21

 Volume 3, Section 5 | Controllers www.wago.com

WAGO IoT Box; Energy Data

with Controller PFC200 (750-8212)

Integrating machines and systems into the "Internet of Things" is incredibly The hardware includes a controller with its own communication interface, I/O
quick and easy with the WAGO IoT Box Energy Data. This IoT Box features modules with analog and digital inputs/outputs, a 3-phase power measure-
power and energy measurement functionality and is ready for immediate use. ment module and a 24 V power supply unit.
It also offers all the functions required for digitalization, from signal acquisition
to cloud connectivity. Depending on the application, additional I/O modules can be added later to
The IoT Box was designed as a plug-and-play device – no hardware engineer- adapt the system to specific requirements.
ing is needed. Collected data is transferred to the desired IoT application with
just a few parameter settings.

Item Description Item No. Communication ETHERNET;

IoT Box; Energy Data 2854-099/000-001 RS-232 interface;
RS-485 interface;
MQTT
This IoT Box includes:
ETHERNET protocols DHCP, DNS, FTP, FTPS, HTTP, HTTPS,
Controller PFC200; 2nd generation; 2 x ETHERNET, RS-232/-485 750-8212
SSH
Switched-Mode Power Supply; Classic; 1-phase; Output voltage: 787-1606
24 VDC; Output current: 2 A; NEC Class 2; DC OK signal Transmission rate ETHERNET: 10/100 Mbit/s
8-Channel Digital Input; 24 VDC; 3 ms; 2-wire connection 750-1415 Visualization Web-Visu
8-Channel Digital Output; 24 VDC; 0.5 A; 2-wire connection 750-1515 Dimensions W x H x D 300 x 300 x 210
8-Channel Analog Input; Resistance measurement; Adjustable 750-451 Power supply (AC) 230 VAC (L/N/GND); 50 Hz
4-Channel Analog Input; Voltage/current; Differential input; 750-471 Weight 7.5 kg
16 bits; Diagnostics Color Light gray (RAL7035)
3-Phase Power Measurement; 690 VAC 1 A 750-495 Housing material Metal
Rogowski Coil; Primary rated current: 4000 A; Output signal: 855-9150/2000-701 Conformity marking 1
22.5 mV per kA; Cable length: 1.5 m; Feedthrough for measure-
Surrounding air temperature (operation) 0 … 45 °C
ment conductor: 70 mm
Surrounding air temperature (storage) −40 … +85 °C
End Module 750-600
Protection type IP20/IP65; (IP65 only applies when
SD Memory Card; pSLC-NAND; 8 GB 758-879/000-2108
both power and LAN cables are
Temperature range: −40 … +90 °C
locked)
IoT Box application (installed and licensed)
Pollution degree I
Circuit breaker; 1-pole; C 10 A; 10 kA
Relative humidity (without condensation) 95 %
Electrical circuit breaker; 1-pole; 24 VDC; 1 … 8 A
Mounting type Wall-mount
Set of wall-mount lugs
Cable grips M16; M20; M25
Connectors (plug and socket) for power supply

22 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 5 | Controllers

WAGO IoT Box; MES

with Controller PFC200 (750-8212)

Integrating machines and systems into the "Internet of Things" is incredibly The hardware includes a controller with its own communication interface,
quick and easy with the WAGO IoT Box MES. This IoT Box also offers a wide I/O modules with analog and digital inputs/outputs and a 24 V power supply
range of communication and bus protocols for communicating with produc- unit.
tion control systems. The complete system is ready for immediate use and
offers all the functions required for digitalization, from signal acquisition to Depending on the application, additional I/O modules can be added later to
cloud connectivity. adapt the system to specific requirements.
The IoT Box was designed as a plug-and-play device – no hardware engineer-
ing is needed. Collected data is transferred to the desired IoT application with
just a few parameter settings. Manufacturing Execution Systems (MES)

Item Description Item No. Communication ETHERNET;

IoT Box; MES 2854-099/000-002 Modbus (TCP, UDP); Modbus RTU;
RS-232 interface;
RS-485 interface;
This IoT Box includes:
MQTT
Controller PFC200; 2nd generation; 2 x ETHERNET, RS-232/-485 750-8212
ETHERNET protocols DHCP, DNS, FTP, FTPS, HTTP, HTTPS,
Switched-Mode Power Supply; Classic; 1-phase; Output voltage: 787-1606
SSH
24 VDC; Output current: 2 A; NEC Class 2; DC OK signal
Transmission rate ETHERNET: 10/100 Mbit/s
8-Channel Digital Input; 24 VDC; 3 ms; 2-wire connection 750-1415
Visualization Web-Visu
8-Channel Digital Output; 24 VDC; 0.5 A; 2-wire connection 750-1515
Dimensions W x H x D 300 x 300 x 210
8-Channel Analog Input; resistance measurement; adjustable 750-451
Power supply (AC) 230 VAC (L/N/GND); 50 Hz
4-Channel Analog Input; Voltage/current; Differential input; 750-471
16 bits; Diagnostics Weight 7.5 kg
End Module 750-600 Color Light gray (RAL7035)
SD Memory Card; pSLC-NAND; 8 GB 758-879/000-2108 Housing material Metal
Temperature range: −40 … +90 °C Conformity marking 1
Energy Data Management (EDM) application (installed and Surrounding air temperature (operation) 0 … 45 °C
licensed)
Surrounding air temperature (storage) −40 … +85 °C
Circuit breaker; 1-pole; C 10 A; 10 kA
Protection type IP20/IP65; (IP65 only applies when
Electrical circuit breaker; 1-pole; 24 VDC; 1 … 8 A both power and LAN cables are
Set of wall-mount lugs locked)
Cable grips M16; M20; M25 Pollution degree I
Connectors (plug and socket) for power supply Relative humidity (without condensation) 95 %
Mounting type Wall-mount

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 23

 Volume 3, Section 5 | Controllers www.wago.com

WAGO IoT Box; Energy Data 4G

with Controller PFC200 (750-8217)

Integrating machines and systems into the "Internet of Things" is incredibly The hardware includes a controller with its own communication interface, I/O
quick and easy with the WAGO IoT Box Energy Data 4G. modules with analog and digital inputs/outputs, a 3-phase power measure-
This IoT Box features power and energy measurement functionality and is ment module and a 24 V power supply unit.
ready for immediate use. It also offers all the functions required for digitaliza-
tion, from signal acquisition to cloud connectivity. The integrated 4G cellular modem provides a wireless connection to the
The IoT Box was designed as a plug-and-play device – no hardware engineer- Internet and includes a radio license for EU countries.
ing is needed. Collected data is transferred to the desired IoT application with
just a few parameter settings. Depending on the application, additional I/O modules can be added later to
adapt the system to specific requirements.

Item Description Item No. Communication ETHERNET;

IoT Box; Energy Data 4G 2854-099/000-003 RS-232 interface;
RS-485 interface;
MQTT
This IoT Box includes:
ETHERNET protocols DHCP, DNS, FTP, FTPS, HTTP, HTTPS,
Controller PFC200; 2nd generation; 2 x ETHERNET, 750-8217
RS-232/-485, 4G cellular module SSH
Magnetic-Mount Antenna; with 2.5 m cable and 758-975 Transmission rate ETHERNET: 10/100 Mbit/s
SMA plug; GSM/UMTS/LTE/Bluetooth®/WLAN; Visualization Web-Visu
698-960, 1400-1518, 1710-2700 MHz Services GPRS connection to Internet
Switched-Mode Power Supply; Classic; 1-phase; Output voltage: 787-1606
Wireless technology GSM/UMTS/LTE
24 VDC; Output current: 2 A; NEC Class 2; DC OK signal
Frequency band GSM dual band (B3; B8); E-UTRA
8-Channel Digital Input; 24 VDC; 3 ms; 2-wire connection 750-1415
bands (B1; B3; B5; B7; B8; B20; B38;
8-Channel Digital Output; 24 VDC; 0.5 A; 2-wire connection 750-1515
B40; B41)
8-Channel Analog Input; Resistance measurement; Adjustable 750-451
Dimensions W x H x D 300 x 300 x 210
4-Channel Analog Input; Voltage/current; Differential input; 750-471
Power supply (AC) 230 VAC (L/N/GND); 50 Hz
16 bits; Diagnostics
3-Phase Power Measurement; 690 VAC 1 A 750-495 Weight 7.5 kg
Color Light gray (RAL7035)
Rogowski Coil; Primary rated current: 4000 A; Output signal: 855-9150/2000-701
22.5 mV per kA; Cable length: 1.5 m; Feedthrough for measure- Housing material Metal
ment conductor: 70 mm Conformity marking 1
End Module 750-600 Surrounding air temperature (operation) 0 … 45 °C
SD Memory Card; pSLC-NAND; 8 GB 758-879/000-2108 Surrounding air temperature (storage) −40 … +85 °C
Temperature range: −40 … +90 °C
Protection type IP20/IP65; (IP65 only applies when
IoT Box application (installed and licensed) both power and LAN cables are
Circuit breaker; 1-pole; C 10 A; 10 kA locked)
Electrical circuit breaker; 1-pole; 24 VDC; 1 … 8 A Pollution degree I
Set of wall-mount lugs Relative humidity (without condensation) 95 %
Cable grips M16; M20; M25 Mounting type Wall-mount
Connectors (plug and socket) for power supply

24 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 5 | Controllers

WAGO IoT Box; MES 4G

with Controller PFC200 (750-8217)

Integrating machines and systems into the "Internet of Things" is incredibly The hardware includes a controller with its own communication interface,
quick and easy with the WAGO IoT Box MES 4G. This IoT Box also offers a wide I/O modules with analog and digital inputs/outputs and a 24 V power supply
range of communication and bus protocols for communicating with produc- unit.
tion control systems. The complete system is ready for immediate use and
offers all the functions required for digitalization, from signal acquisition to The integrated 4G cellular modem provides a wireless connection to the
cloud connectivity. Internet and includes a radio license for EU countries.
The IoT Box was designed as a plug-and-play device – no hardware engineer-
ing is needed. Collected data is transferred to the desired IoT application with Depending on the application, additional I/O modules can be added later to
just a few parameter settings. adapt the system to specific requirements.

Manufacturing Execution Systems (MES)

Item Description Item No. Communication ETHERNET;

IoT Box; MES 4G 2854-099/000-004 Modbus (TCP, UDP); Modbus RTU;
RS-232 interface;
RS-485 interface;
This IoT Box includes:
MQTT
Controller PFC200; 2nd generation; 2 x ETHERNET, 750-8217
RS-232/-485, 4G cellular module ETHERNET protocols DHCP, DNS, FTP, FTPS, HTTP, HTTPS,
SSH
Magnetic-Mount Antenna; with 2.5 m cable and 758-975
SMA plug; GSM/UMTS/LTE/Bluetooth®/WLAN; Transmission rate ETHERNET: 10/100 Mbit/s
698-960, 1400-1518, 1710-2700 MHz Visualization Web-Visu
Switched-Mode Power Supply; Classic; 1-phase; Output voltage: 787-1606 Services GPRS connection to Internet
24 VDC; Output current: 2 A; NEC Class 2; DC OK signal
Wireless technology GSM/UMTS/LTE
8-Channel Digital Input; 24 VDC; 3 ms; 2-wire connection 750-1415
Frequency band GSM dual band (B3; B8); E-UTRA
8-Channel Digital Output; 24 VDC; 0.5 A; 2-wire connection 750-1515
bands (B1; B3; B5; B7; B8; B20; B38;
8-Channel Analog Input; Resistance Measurement; Adjustable 750-451 B40; B41)
4-Channel Analog Input; Voltage/current; Differential input; 750-471 Dimensions W x H x D 300 x 300 x 210
16 bits; Diagnostics
Power supply (AC) 230 VAC (L/N/GND); 50 Hz
End Module 750-600
Weight 7.5 kg
SD Memory Card; pSLC-NAND; 8 GB 758-879/000-2108
Temperature range: −40 … +90 °C Color Light gray (RAL7035)
Energy Data Management (EDM) application (installed and Housing material Metal
licensed) Conformity marking 1
Circuit breaker; 1-pole; C 10 A; 10 kA Surrounding air temperature (operation) 0 … 45 °C
Electrical circuit breaker; 1-pole; 24 VDC; 1 … 8 A Surrounding air temperature (storage) −40 … +85 °C
Set of wall-mount lugs Protection type IP20/IP65; (IP65 only applies when
Cable grips M16; M20; M25 both power and LAN cables are
locked)
Connectors (plug and socket) for power supply
Pollution degree I
Relative humidity (without condensation) 95 %
Mounting type Wall-mount

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 25

 Volume 3, Section 7 | I/O System – 750 and 753 Series www.wago.com

Functional safety ▶ Digital input

T1 9 13 T1
T1 I1 I1 I5

T2 10 14 T2
T2 I2 I2 I6
24 V 24 V

T3 11 15 T1
T1 I3 I3 I7
0V 0V

12 16
T4 T2
T2 I4 I4 I8

750-661/000-004

Item description Safe 4-channel digital input; 24 VDC; PROFIsafe Safe 8-channel digital input; 24 VDC; PROFIsafe
Version Standard pluggable Standard pluggable
Item no. 750-661/000-004 753-661/000-004 750-662/000-004 753-662/000-004
Order text 4FDI 24V PROFIsafe 4FDI 24V PROFIsafe 8FDI 24V PROFIsafe 8FDI 24V PROFIsafe

Technical data
Pluggable connector fixed pluggable fixed pluggable
Number of digital inputs 4 8
Achievable safety classes SIL 3; Category 4, PLe (two-channel); SIL 3; Category 4, PLe (two-channel);
SIL 2; Category 2; PLd (one-channel) SIL 2; Category 2; PLd (one-channel)
Interface types according to ZVEI (inputs) Drain; A, C0, C1, C2, C3 Drain; A, C0, C1, C2, C3
Protocols PROFIsafe V2.6 (PROFINET) PROFIsafe V2.6 (PROFINET)
Configuration options PROFIsafe address adjustable via DIP switch or engi- PROFIsafe address adjustable via DIP switch or engi-
neering software neering software
Input characteristic clock sensitive clock sensitive
Input characteristic Type 1 per IEC 61131 Type 1 per IEC 61131
Input current per channel for signal (1) typ. 3 mA 3 mA
Signal frequency (max.) 50 Hz 50 Hz
Output current per channel 0.1 A 0.1 A
Supply voltage (field) 24 VSELV/PELV DC (-25 … +30 %); via power jumper 24 VSELV/PELV DC (-25 … +30 %); via power jumper
contacts (power supply via blade contact; transmission contacts (power supply via blade contact; transmission
via spring contact) via spring contact)
Current consumption (5 V system supply) 120 mA 120 mA
Ambient temperature (operation) 0 … +55 °C 0 … +55 °C
Dimensions W x H x D (12 x 100 x 67.8) mm (24 x 100 x 67.8) mm
Functional safety
Safety standards IEC 61508-1 … -7; EN ISO 13849-1; EN 62061 IEC 61508-1 … -7; EN ISO 13849-1; EN 62061
Approvals 1; Marine; r OrdLoc/HazLoc 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-661/000- wago.com/753-661/000- wago.com/750-662/000- wago.com/753-662/000-
004 004 004 004
Accessories Item no. Item no. Item no. Item no.
Plug; Safety — 753-120 — 753-120
Support for iPar servers allows automatic parameter Support for iPar servers allows automatic parameter
restoration when replacing an I/O module. restoration when replacing an I/O module.

26 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 7 | I/O System – 750 and 753 Series

Functional safety ▶ Digital input; Digital output

T1 1 5 9 13 24 V
I1 0V

T2 2 6 10 14 O1B
I2 O+ Outputs
24 V O+ Supply voltage
(system) 24 VDC
O1B
T1 3 7 11 15 O2A
I3 O– O+
0V O–
O-
Logic
T2 4 8 12 16 O2B O2A
I4 0V
O2B
750-666/000-004

Item description Safe 4/2 channel digital input/output; 24 VDC; 10 A; This module enables a fail-safe 2-channel switch-off
PROFIsafe (single failure protection) when the power outputs are
Version Standard used in a bipolar configuration. If a fail-safe 1-channel
switch-off is adequate, two independent switching
Item no. 750-666/000-004
channels are available.
Order text 4FDI/2FDO 24V/10A PROFIsafe The module is capable of safely shutting off the supply
voltage of entire actuator groups which are connected
Technical data to the standard modules arranged to the right.
Number of digital inputs 4 The 2-channel circuit types P-M and P-P, as well as the
1-channel circuit types P, P or P, M are available.
Achievable safety classes SIL 3; Category 4, PLe (two-channel);
SIL 2; Category 2; PLd (one-channel) Support for iPar servers allows automatic parameter
Interface types according to ZVEI (inputs) Drain; A, C0, C1, C2, C3 restoration when replacing an I/O module.
Protocols PROFIsafe V2.6 (PROFINET)
Configuration options PROFIsafe address adjustable via DIP switch or engi-
neering software
Sensor connection 4 x (Fail-safe input with test pulse)
Input characteristic clock sensitive
Input characteristic Type 1 per IEC 61131
Input current per channel for signal (1) typ. 3 mA
Signal frequency (max.) 50 Hz
Number of digital outputs 2
Interface types according to ZVEI (outputs) Source; C0, C1, C2, C3, D0, D1, D2, D3
Output circuit design Power outputs
Actuator connection 2 x (fail-safe output with test pulse)
Output current per channel 10 A
Output current short-circuit-protected
Output current (module) 20 A
Switching frequency (max.) 50 Hz; Resistive load
Switching frequency (max.) (2) 0.1 Hz; Inductive load
Switching frequency (max.) (3) 0.1 Hz; Kapazitive Last
Supply voltage (field) 24 VSELV/PELV DC (-25 … +30 %); via power jumper
contacts (power supply via blade contact)
Current consumption (5 V system supply) 120 mA
Ambient temperature (operation) 0 … +55 °C
Functional safety
Safety standards IEC 61508-1 … -7; EN ISO 13849-1; EN 62061
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-666/000-004

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 27

 Volume 3, Section 7 | I/O System – 750 and 753 Series www.wago.com

Functional safety ▶ Digital input; Digital output

T1 9 13 O1+
I1 O1–

T2 10 14 O2+
I2 O2–
24 V

T1 11 15 O3+
I3 O3–
0V

12 16
T2 O4+
I4 O4–

750-667/000-004

Item description Safe 4/4 channel digital input/output; 24 VDC; 2 A; PROFIsafe

Version Standard pluggable
Item no. 750-667/000-004 753-667/000-004
Order text 4FDI/4FDO 24V/2A PROFIsafe 4FDI/4FDO 24V/2A PROFIsafe

Technical data
Pluggable connector fixed pluggable
Number of digital inputs 4
Achievable safety classes SIL 3; Category 4, PLe (two-channel); SIL 2; Category 2; PLd (one-channel)
Interface types according to ZVEI (inputs) Drain; A, C0, C1, C2, C3
Protocols PROFIsafe V2.6 (PROFINET)
Configuration options PROFIsafe address adjustable via DIP switch or engineering software
Sensor connection 4 x (Fail-safe input with test pulse)
Input characteristic clock sensitive
Input characteristic Type 1 per IEC 61131
Input current per channel for signal (1) typ. 3 mA
Signal frequency (max.) 50 Hz
Number of digital outputs 4
Interface types according to ZVEI (outputs) Source; C0, C1, C2, C3, D0, D1, D2, D3
Output circuit design Power outputs
Actuator connection 4 x (fail-safe output with test pulse)
Output current per channel 2A
Output current short-circuit-protected
Output current (module) 8A
Capacitive load for each channel O1 … O4; 47 μF
Switching frequency (max.) 50 Hz; Resistive load
Switching frequency (max.) (2) 0.1 Hz; Inductive load
Supply voltage (field) 24 VSELV/PELV DC (-25 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring
contact)
Current consumption (5 V system supply) 120 mA
Ambient temperature (operation) 0 … +55 °C
Dimensions W x H x D (24 x 100 x 67.8) mm
Functional safety
Safety standards IEC 61508-1 … -7; EN ISO 13849-1; EN 62061
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-667/000-004 wago.com/753-667/000-004
Accessories Item no. Item no.
Plug; Safety — 753-120
Support for iPar servers allows automatic parameter restoration when replacing an I/O module.

28 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 7 | I/O System – 750 and 753 Series

Function and technology modules ▶ Pulse width modulation

DO 1 DO 2

U+ Out U+ Out
24 V

U- Out U- Out
0V

DO 3 DO 4

750-677

Item description 4-Channel Pulse Width Outputs; 24 VDC; 0.2 A; 20 kHz

Version Standard
Item no. 750-677
Order text 4PWM; 24 VDC; 0.2A; 20kHz

Technical data
Number of digital outputs 4
Pulse frequency 0 … 20,000 Hz; integer
Duty cycle 0 … 100 %; 11-bit resolution
Output current per channel 0.2 A
Output current short-circuit-protected; 0.4 A, short-circuit-protected in bridge mode
Switching frequency (max.) 20 kHz
Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Current consumption (5 V system supply) 85 mA
Data width 4 x 16-bit data; 4 x 8-bit control/status
Operating mode 1: PWM DC (variable duty cycle); 2: PWM Frq (variable frequency); 3: PWM Frq - Cnt; 4: Pulse Frq - Cnt; 5: PWM Pulse -
Dir
Isolation 500 V system/field
Ambient temperature (operation) 0 … +55 °C
Dimensions W x H x D (12 x 100 x 67.8) mm
Approvals 1
Approvals (pending) Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-677
This module outputs separately adjustable PWM signals at four channels. The channels can be individually configured
as LSS (low-side switching) or HSS (high-side switching) and are short-circuit protected. The PWM signals are each 16
bits wide.
The module supports five operating modes. In both “PWM DC” and “PWM Frq” operating modes, all four channels may
be used independently. The bridge mode can also be activated if the same operating mode is set on each channel
pair (1 and 2 or 3 and 4). Both channels work synchronously and can be connected in parallel. In the other three com-
plex operating modes, two channels functionally correlate with each other. The first channel outputs the PWM signal
and the second channel a static signal (“0” or “1”).
Refer to the manual (“Operating Modes” section) for all setting options and the bit signification in the process image.
The “PWM DC” operating mode is set by default.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 29

 Volume 3, Section 7 | I/O System – 750 and 753 Series www.wago.com

Supply and segment modules ▶ Bus end module

750-600/000-001

Item description End Module; with Potential Group

Version Standard
Item no. 750-600/000-001
Order text End Module; with Potential Group

Technical data
Supply voltage (system) 5 VDC; via data contacts
Voltage (potential group) 0 … 230 VAC/DC; Supply via CAGE CLAMP® contacts
Rated surge voltage 5 kV per EN 60870-2-1 / Class VW3, or 6.4 kV per EN 61010-1
Ambient temperature (operation) 0 … +55 °C
Dimensions W x H x D (12 x 100 x 67.8) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-600/000-001
An end module must be snapped onto the assembly at the end of a fieldbus node.
In addition, the 8 CAGE CLAMP® connections are brought together as a potential group.
The end module completes the internal data bus, while providing correct data transmission.

30 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 7 | I/O System – 750 and 753 Series

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 31

 Volume 3, Section 8 | I/O System ‒ 750 XTR Series www.wago.com

Digital input

3 ms

1 9
U‒ DI 1 U‒
2 10
U‒ DI 2 U‒
3 11
U‒ DI 3 U‒
24 V
4 12
U‒ DI 4 U‒
5 13
U‒ DI 5 U‒
0 V (U‒)
6 14
U‒ DI 6 U‒
7 15
U‒ DI 7 U‒
8 16
U‒ DI 8 U‒

750-1417/040-000

Item description 8-Channel Digital Input; 24 VDC; 3 ms; Low-Side Switching; 2-Wire Connection
Version extreme with 16 connectors
Item no. 750-1417/040-000
Order text 8DI; 24 VDC; 3ms; LSS; 2-wire; XTR

Technical Data
Number of digital inputs 8
Signal type Voltage
Signal type (voltage) 24 VDC
Voltage range for signal (0) (UV - 5 V) … UV DC
Voltage range for signal (1) −3 VDC … (UV - 15 V)
Sensor connection 8 x (2-wire)
Input characteristic low-side switching
Input filter (digital) 3 ms
Input current per channel for signal (0) typ. 2.4 mA
Dielectric strength 510 VAC/775 VDC; per EN 60870-2-1
Supply voltage (sensor) 24 VDC
Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact);
Derating must be observed!
Derating Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 … +30 %);
for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %);
Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Current consumption (5 V system supply) 12 mA
Rated surge voltage 1 kV
Input data width (internal) max. 8 bits
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (12 x 100 x 69) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-1417/040-000

32 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 8 | I/O System ‒ 750 XTR Series

Digital output

0.5 A

1 9
U+ DO 1 U+
2 10
U+ DO 2 U+
3 11
U+ DO 3 U+
24 V (U+)
4 12
U+ DO 4 U+
5 13
U+ DO 5 U+
0V
6 14
U+ DO 6 U+
7 15
U+ DO 7 U+
8 16
U+ DO 8 U+

750-1516/040-000

Item description 8-Channel Digital Output; 24 VDC; 0.5 A; Low-Side Switching; 2-Wire Connection
Version extreme with 16 connectors
Item no. 750-1516/040-000
Order text 8DO 24 VDC 0.5A LSS 2-wire XTR

Technical Data
Number of digital outputs 8
Signal type Voltage
Signal type (voltage) 24 VDC
Output characteristic low-side switching
Output current per channel 0.5 A
Output current short-circuit-protected
Load type Resistive, inductive, lamp load
Actuator connection 8 x (2-wire)
Switching frequency (max.) 1 kHz
Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact);
Derating must be observed!
Derating Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 … +30 %);
for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %);
Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Current consumption, field supply (module with no 8 mA
external load)
Current consumption (5 V system supply) 20 mA
Output data width (internal) max. 8 bits
Rated surge voltage 1 kV
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (12 x 100 x 69) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-1516/040-000

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 33

 Volume 3, Section 8 | I/O System ‒ 750 XTR Series www.wago.com

Analog input

U/I

+AI 1 –AI 1 + U –

+AI 2 –AI 2 + –
24 V U

+AI 3 –AI 3 + –
0V U

+AI 4 –AI 4 + –

750-471/040-000

Item description 4-Channel Analog Input; for Voltage/Current

Version extreme
Item no. 750-471/040-000
Order text 4AI U/I Diff Galv XTR

Technical Data
Number of analog inputs 4
Signal type Current; Voltage
Signal type (current) 0 … 20 mADC; 4 … 20 mADC; 3.6 … 21 mADC; -20 … +20 mADC
Signal type (voltage) 0 … 10 VDC; -10 … +10 VDC; -0.2 … +0.2 VDC
Signal characteristics Differential
Sensor connection 4 x (2-wire)
Resolution [bit] 16 bits
Conversion time (typ.) 10 ms
Input resistance (max.) 120 Ω
Internal resistance 100 kΩ
Input voltage (max.) 31.2 VDC
Reference for measurement error Input ranges
Measurement error (reference temperature) 25 °C
Measurement error, deviation (max.) from the up- 0.1 %
per-range value
Reference for measurement error (2) ±200 mV
Measurement error, reference temperature (2) 25 °C
Measurement error, deviation (max.) of the up- 0.3 %
per-range value (2)
Temperature error (max.) of the upper-range value 0.01 %/K
Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact);
Derating must be observed!
Derating Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 … +30 %);
for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %);
Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Current consumption (5 V system supply) 100 mA
Data width 4 x 16-bit data; 4 x 8-bit control/status (optional)
Isolation Functional insulation: 2000 VDC system/channel; 2000 VDC channel/channel
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (12 x 100 x 67.8) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-471/040-000

34 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 8 | I/O System ‒ 750 XTR Series

Pulse width modulation

DO 1 DO 2

U Out+ U Out+
24 V

U Out- U Out-
0V

DO 3 DO 4

750-677/040-000

Item description 4-Channel Pulse Width Outputs; 24 VDC; 0.2 A; 20 kHz

Version extreme
Item no. 750-677/040-000
Order text 4PWM; 24 VDC; 0.2A; 20kHz; XTR

Technical data
Number of digital outputs 4
Pulse frequency 0 … 20,000 Hz; integer
Duty cycle 0 … 100 %; 11-bit resolution
Output current per channel 0.2 A
Output current short-circuit-protected; 0.4 A, short-circuit-protected in bridge mode
Switching frequency (max.) 20 kHz
Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact);
Derating must be observed!
Derating Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 … +30 %);
for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %);
Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Current consumption (5 V system supply) 85 mA
Rated surge voltage 1 kV
Data width 4 x 16-bit data; 4 x 8-bit control/status
Operating mode 1: PWM DC (variable duty cycle); 2: PWM Frq (variable frequency); 3: PWM Frq - Cnt; 4: Pulse Frq - Cnt;
5: PWM Pulse - Dir
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (12 x 100 x 67.8) mm
Approvals 1
Approvals (pending) Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-677/040-000
This module outputs separately adjustable PWM signals at four channels. The channels can be individually configured
as LSS (low-side switching) or HSS (high-side switching) and are short-circuit protected. The PWM signals are each 16
bits wide.
The module supports five operating modes. In both “PWM DC” and “PWM Frq” operating modes, all four channels may
be used independently. The bridge mode can also be activated if the same operating mode is set on each channel
pair (1 and 2 or 3 and 4). Both channels work synchronously and can be connected in parallel. In the other three com-
plex operating modes, two channels functionally correlate with each other. The first channel outputs the PWM signal
and the second channel a static signal (“0” or “1”).
Refer to the manual (“Operating Modes” section) for all setting options and the bit signification in the process image.
The “PWM DC” operating mode is set by default.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 35

 Volume 3, Section 8 | I/O System ‒ 750 XTR Series www.wago.com

Distance and angle measurement

_ 9 13 24 V/
A/A
0V

_ 10 14
N1/
B/B
N2

_ 11 15
Latch/
C/C
Gate

12 16 Ref/
Ue/U0 Shield
DIN-35 rail
750-637/040-000

Item description Incremental Encoder Interface; RS-422; 32 Bits

Version extreme
Item no. 750-637/040-000
Order text Inc. Encoder; RS422; 32Bit; XTR

Technical data
Encoder connection A; /A; B; /B; C; /C (RS-422 inputs)
Counter depth 32 bits
Limit frequency 250 kHz
Quadrature decoder 4x evaluation
Zero impulse (latch) 32 bits
Commands Reading, setting, activating
Supply voltage (encoder) 5 VDC
Output voltage 24 VDC
Output current per channel 0.5 A
Output current short-circuit-protected
Voltage range for signal (0) UABC = RS-422; Latch, gate, ref.: -3 … +5 VDC
Voltage range for signal (1) UABC = RS-422; Latch, gate, ref.: 15 … 30 VDC
Input current (typ.) Latch 7 mA, Gate 7 mA, Ref. 7 mA
Current consumption, field supply (module with no 35 mA
external load)
Current consumption (5 V system supply) 110 mA
Rated surge voltage 1 kV
Data width 1 x 32-bit data 2 x 8-bit control/status
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (24 x 100 x 67.8) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-637/040-000

36 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 8 | I/O System ‒ 750 XTR Series

Bus end module

750-600/040-001

Item description End Module; with Potential Group

Version extreme
Item no. 750-600/040-001
Order text End Module; with Potential Group; XTR

Technical data
Supply voltage (system) 5 VDC; via data contacts
Voltage (potential group) 0 … 230 VAC/DC; Supply via CAGE CLAMP® contacts
Rated surge voltage 5 kV per EN 60870-2-1 / Class VW3, or 6.4 kV per EN 61010-1
Ambient temperature (operation) -40 … +70 °C
Dimensions W x H x D (12 x 100 x 67.8) mm
Approvals 1; Marine; r OrdLoc/HazLoc
For data sheet and additional information, see: wago.com/750-600/040-001
An end module must be snapped onto the assembly at the end of a fieldbus node.
In addition, the 8 CAGE CLAMP® connections are brought together as a potential group.
The end module completes the internal data bus, while providing correct data transmission.

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 37

 Volume 3, Section 9 | I/O System Field www.wago.com

1-Channel Analog Input; IO-Link Converter; 4 … 20 mA

30
4 3 M12x1

1 2

Evaluation side
M12-A plug; 4-pole

1: 24 VDC: Supply 1L+

2: OUT2: Analog output esc Push ring
3: 0 V: Supply 1L-
4: OUT1: Digital output (SIO)/IO-Link
LED

63
Display

31
3 4
5
2 1

M12-A socket; 5-pole Sensor side

1: Sensor supply 1L+ M12x1 24

2: Analog input (4 … 20 mA)

r 2022
3: Sensor supply 1L-
embe 4: not used
b le Nov 5: not used
Availa

Item Description 1-Channel Analog Input; IO-Link Converter; 4 … 20 mA

Item No. 765-2701/200-000
Order Text 1AI FLD IOL CONV 4-20mA

Technical Data
Supply voltage 24 VDC; −25 … +25 %; (18 … 30 VDC)
Power consumption 1W
Operation modes SIO; IO-Link
Inputs
Number of analog inputs 1
Connection technology M12-A socket; 5-pole
Signal type (current) 4 … 20 mA
Sensor supply 24 VDC
Sensor current ≤ 800 mA
Accuracy 0.5 % of the upper-range value
Outputs
Digital output (OUT 1)
Number of digital outputs 1
Connection technology M12-A plug; 4-pole
Current carrying capacity per output 50 mA
Signal type (voltage) 10 … 30 VDC
Output circuit design Make/break contact; parameterizable
Analog output (OUT 2)
Number of analog outputs 1
Signal type (current) 4 … 20 mA
Accuracy 0.5 % of the upper-range value
Resolution 10 bits
IO-Link
Communication interface IO-Link Class A
Transmission type COM2 (38.4 kBaud)
IO-Link revision 1.1
Process data 1 x 16-bit IN (analog); 1 x 16-bit IN (digital)
Process cycle time (min.) 3.2 ms
Parameters via IO-Link Operating mode, switching point, delay, scaling, etc.
Indicators Digital output: 1 x yellow LED; Power: 1 x green LED; Display: 7-segment red/green LED
Length of connection cables 30 m without IO-Link on each side; 20 m with IO-Link on the master side
Dimensions 63 x 30 x 24 mm
Ambient temperature (operation) −20 … +60 °C (70 °C with display switched off)
Ambient temperature (storage) −25 … 70 °C
Protection type IP67
Relative humidity (without condensation) max. 90 % (31 °C); linearly decreasing to 50 % (40 °C)
Approvals 1, UL, IO-Link, MTTF (373 years)
For data sheet and additional information, see: wago.com/765-2701/200-000
Accessories Item No.
Mounting Clip 765-101/000-000

38 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 9 | I/O System Field

2-Channel Analog Input; IO-Link Converter; 0 … 10 V

30
4 3 M12x1

1 2

IO-Link side
M12-A plug; 4-pole

1: 24 VDC: Supply 1L+

2: not used
3: 0 V: Supply 1L-
4: C/Q IO-Link

63
LED

31
3 4
5
2 1

M12-A socket; 5-pole Sensor side

1: Sensor supply 1L+ M12x1 24

2: Analog input 2 (0 … 10 V)
3: Sensor supply 1L-
4: Analog input 1 (0 ... 10 V)
5: not used

Item Description 2-Channel Analog Input; IO-Link Converter; 0 … 10 V

Item No. 765-2702/200-000
Order Text 2AI FLD IOL CONV 0-10V

Technical Data
Supply voltage 24 VDC; −25 … +25 %; (18 … 30 VDC)
Current consumption < 380 mA
Inputs
Number of analog inputs 2
Connection technology M12-A socket; 5-pole
Signal type (voltage) 0 … 10 V
Current carrying capacity for all inputs 200 mA (max.)
Input resistance > 100 kΩ
Accuracy 0.25 % of the upper-range value
IO-Link
Communication interface IO-Link Class A/B
Transmission type COM2 (38.4 kBaud)
IO-Link revision 1.1
Process data 2 x 16-bit IN (analog)
Process cycle time (min.) 4.3 ms
Parameters via IO-Link Description, system identifier, location identifier, mean value filter
Indicators Analog input: 2 x yellow LED; Power: 1 x green LED
Length of connection cables 20 m
Dimensions 63 x 30 x 24 mm
Ambient temperature (operation) −20 … +60 °C
Ambient temperature (storage) −25 … 70 °C
Protection type IP67
Relative humidity (without condensation) max. 90 % (31 °C); linearly decreasing to 50 % (40 °C)
Approvals 1, UL, IO-Link, MTTF (504 years)
For data sheet and additional information, see: wago.com/765-2702/200-000
Accessories Item No.
Mounting Clip 765-101/000-000

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 39

 Volume 3, Section 9 | I/O System Field www.wago.com

2-Channel Analog Output; IO-Link Converter; 4 … 20 mA

30
4 3 M12x1

1 2

IO-Link side
M12-A plug; 4-pole

1: 24 VDC: Supply 1L+

2: not used
3: 0 V: Supply 1L-
4: C/Q IO-Link

63
LED

31
3 4
5
2 1

M12-A socket; 5-pole Actuator side

1: Actuator supply 1L+ M12x1 24

2: Analog output 2 (4 … 20 mA)
3: Actuator supply 1L-
4: Analog output 1 (4 ... 20 mA)
5: not used

Item Description 2-Channel Analog Output; IO-Link Converter; 4 … 20 mA

Item No. 765-2703/200-000
Order Text 2AO FLD IOL CONV 4-20mA

Technical Data
Supply voltage 24 VDC; −25 … +25 %; (18 … 30 VDC)
Current consumption 300 mA
Operation modes IO-Link
Outputs
Number of analog outputs 2
Connection technology M12-A socket; 5-pole
Signal type (current) 4 … 20 mA
Load impedance ≤ 300 Ω
Accuracy 0.25 % of output range end value
IO-Link
Communication interface IO-Link Class A/B
Transmission type COM2 (38.4 kBaud)
IO-Link revision 1.1
Process data 2 x 16-bit OUT (analog)
Process cycle time (min.) 3.6 ms
Parameters via IO-Link Description
Indicators Analog output: 2 x yellow LED; Power: 1 x green LED
Length of connection cables 20 m
Dimensions 63 x 30 x 24 mm
Ambient temperature (operation) −20 … +60 °C
Ambient temperature (storage) −25 … 70 °C
Protection type IP67
Relative humidity (without condensation) max. 90 % (31 °C); linearly decreasing to 50 % (40 °C)
Approvals 1, UL, IO-Link, MTTF (352 years)
For data sheet and additional information, see: wago.com/765-2703/200-000
Accessories Item No.
Mounting Clip 765-101/000-000

40 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 9 | I/O System Field

2-Channel Analog Output; IO-Link Converter; 0 … 10 V

30
4 3 M12x1

1 2

IO-Link side
M12-A plug; 4-pole

1: 24 VDC: Supply 1L+

2: not used
3: 0 V: Supply 1L-
4: C/Q IO-Link

63
LED

31
3 4
5
2 1

M12-A socket; 5-pole Actuator side

1: Actuator supply 1L+ M12x1 24

2: Analog output 2 (0 … 10 V)
3: Actuator supply 1L-
4: Analog output 1 (0 ... 10 V)
5: not used

Item Description 2-Channel Analog Output; IO-Link Converter; 0 … 10 V

Item No. 765-2704/200-000
Order Text 2AO FLD IOL CONV 0-10V

Technical Data
Supply voltage 24 VDC; −25 … +25 %; (18 … 30 VDC)
Current consumption 300 mA
Operation modes IO-Link
Outputs
Number of analog outputs 2
Connection technology M12-A socket; 5-pole
Signal type (voltage) 0 … 10 V
Load impedance ≤ 3000 Ω
Accuracy 0.25 % of output range end value
IO-Link
Communication interface IO-Link Class A/B
Transmission type COM2 (38.4 kBaud)
IO-Link revision 1.1
Process data 2 x 16-bit OUT (analog)
Process cycle time (min.) 3.6 ms
Parameters via IO-Link Description, system identifier, location identifier
Indicators Analog output: 2 x yellow LED; Power: 1 x green LED
Length of connection cables 20 m
Dimensions 63 x 30 x 24 mm
Ambient temperature (operation) −20 … +60 °C
Ambient temperature (storage) −25 … 70 °C
Protection type IP67
Relative humidity (without condensation) max. 90 % (31 °C); linearly decreasing to 50 % (40 °C)
Approvals 1, UL, IO-Link, MTTF (373 years)
For data sheet and additional information, see: wago.com/765-2704/200-000
Accessories Item No.
Mounting Clip 765-101/000-000

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 41

 Volume 3, Section 9 | I/O System Field www.wago.com

1-Channel Analog Input; IO-Link Converter; Pt100/Pt1000

4 3
25
1 2
M12x1

M12-A plug; 4-pole

1: 24 VDC: Supply 1L+ IO-Link side

2: Analog signal for temperature
3: 0 V: Supply 1L-
4: Switch signal for temperature/IO link

56
15

24
3 4

2 1

M12-A socket; 4-pole

1: RL- M12x1 Sensor side

2: R-

r 2022 3: R+
embe 4: RL+
bl e Sept
Availa

Item Description 1-Channel Analog Input; IO-Link Converter; Pt100/Pt1000

Version Voltage Current
Item No. 765-2705/200-000 765-2706/200-000
Order Text 1AI FLD IOL CONV PT100/1000 U 1AI FLD IOL CONV PT100/1000 I

Technical Data
Supply voltage 24 VDC (18 … 30 VDC)
Current consumption < 50 mA
Inputs
Number of analog inputs 1
Connection technology M12-A socket; 4-pole
Signal type (resistors) Pt100, Pt1000
Measurement ranges −100 ... 300 °C; −148 ... 572 °F
Outputs
Number of outputs 2
Connection technology M12-A socket; 4-pole
Output signal Analog signal; IO-link
Signal type 0 … 10 V 4 … 20 mA
Load impedance (max.) 300 Ω
Accuracy (analog output) ± 0.1 K + (± .1 % MS)
Accuracy (IO-Link) ± 0.1 K
IO-Link
Communication interface IO-Link Class
Transmission type COM2 (38.4 kBaud)
IO-Link revision 1.1
Process data 1 x 16-bit IN (analog)
Process cycle time (min.) 3.2 ms
Parameters via IO-Link Measurement range, calibration, limit values, simulation, etc.
Indicators Power: 1 x green LED
Length of connection cables 100 m (sensor side); 20 m (IO-Link side)
Dimensions 56 x 25 x 15 mm
Ambient temperature (operation) −25 … 100 °C
Ambient temperature (storage) −40 … 100 °C
Protection type IP68; IP69K
Relative humidity (without condensation) 90 % (max.)
Approvals 1, UL*, IO-Link; *pending
For data sheet and additional information, see: wago.com/765-2705/200-000 wago.com/765-2706/200-000
Accessories Item No. Item No.
Mounting Clip 765-102/000-000 765-102/000-000

42 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 9 | I/O System Field

Mounting Clip

24
20 5

4,2
34

Figure: Mounting Clip (765-101/000-000)

Item Description Mounting Clip

Version for 765-2701/200-000, 765-2702/200-000, 765-2703/200-000 and 765-2704/200-000 Converters
Item No. 765-101/000-000

Technical Data
Weight 6.8 g
Dimensions 34 x 20 x 24 mm
Material Copper beryllium 2.1247 (CuBe2)

20
20 5
4,5
26

Figure: Mounting Clip (765-102/000-000)

Item Description Mounting Clip

Version for 765-2705/200-000 and 765-2706/200-000 Converters
Item No. 765-102/000-000

Technical Data
Weight 6.8 g
Dimensions 26 x 20 x 20 mm
Material Copper beryllium 2.1247 (CuBe2)

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 43

 Volume 3, Section 10 | Industrial Switches www.wago.com

Industrial ECO switches ▶ 8 ports 100BASE-TX

LED 1: Power supply

LED 2: TX port 100Mbit/s
LED 3: LNK/ACT
4: 8 x RJ-45
PWR (10/100BASE-TX ports)

100

1 2

3 4

5 6

2
7 8
LNK/
ACT 3

852-112/000-001 852-112/000-001

Item no. 852-112/000-001

Order text Industrial-Eco-Switch; 8Port

Technical data
Switching mode Store‐and‐forward; non-blocking
Number of copper ports 8 x 100BASE-TX (RJ-45)
Communication standards IEEE 802.3 10BASE-T; IEEE 802.3u 100BASE-TX; IEEE 802.3x Flow Control; IEEE 802.1p Prioritization
Topology Star
Supply voltage 12 … 48 VDC
Power consumption (max.) 2W
Connection technology: communication/fieldbus Copper cable: 8 x RJ-45
Ambient temperature (operation) -40 … +70 °C
Approvals 1; r OrdLoc
For data sheet and additional information, see: wago.com/852-112/000-001

44 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 10 | Industrial Switches

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 45

 Volume 3, Section 11 | Radio Technology www.wago.com

EnOcean® RS-485 Gateway; 868 MHz

Control
24 V GND

RS-485
EnOcean
Gateway

X2 X1
A B com NC FE

Item Description EnOcean® RS-485 Gateway; 868 MHz The EnOcean® RS-485 Gateway integrates main-
tenance-free, battery-free and wireless sensors/
Item No. 750-940
actuators based on EnOcean® wireless techno-
logy (ISO/IEC 14543-3-1x) into intelligent control
Technical Data
systems such as the WAGO I/O System.
Wireless technology EnOcean®
Frequency band 868 MHz This gateway communicates with the remote
Transmission range Approx. 30 m within buildings; station via RS-485 interface and ESP3 telegrams
>100 m in open space (EnOcean®) or via Modbus® protocol.
Antenna Internal (external antenna optional via SMA socket)
It may be mounted directly to the ceiling or wall.
Interface RS-485
The device can also be mounted on a DIN-rail via
Protocol ESP3, Modbus® an integrated adapter.
Transmission rate 9600 … 115200 Baud The gateway has an internal antenna and also
has a connector for an optional external antenna.
Data width 50 bytes
Cable length 100 m (max.)
Power supply 24 VDC (−25 … +30 %)
Input current 2 A (max.)
Connection technology RS-485 connection:
5-pole 2-conductor compact PCB connectors
with PUSH WIRE® (252-155 is included)
Supply connection: 2-pole 2-conductor compact
PCB connectors with PUSH WIRE® (252-152 is
included)
Antenna: SMA socket for external antenna
Conductor cross-section Solid: 0.4 … 0.8 mm² / 26 … 20 AWG
Strip length 6 … 7 mm
Dimensions (mm) Diameter x Height 95 × 36
Weight 103 g
Protection type IP30 (front side)
Surrounding air temperature (operation) 0 … +55 °C
Surrounding air temperature (storage) −20 … +85 °C
EMC immunity to interference EN 61000-6-2
EMC emission of interference EN 61000-6-3 + A1
Approvals 1
Data sheet and additional information, see: wago.com/750-940

46 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 3, Section 11 | Radio Technology

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 47

WAGO Electronic Interface
www.wago.com Volume 4, WAGO Power Supplies

WAGO Electronic Interface

Page
Volume 4

Optocoupler module; Output voltage range: 3 … 31.2 VDC; 50

Limiting continuous current: 3 A

WAGO Power Supplies

Power supply; Compact; 1-phase; 18 VDC / 1.25 A 52

Power supply; Pro 2; 3-phase; 24 VDC / 5 A 54

Power supply; Pro 2; 3-phase; 24 VDC / 10 A 55
Power supply; Pro 2; 3-phase; 24 VDC / 20 A 56
Power supply; Pro 2; 3-phase; 24 VDC / 40 A 57

Products highlighted in RED are new items for Spring 2022

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 49

 Volume 4, Section 2 | WAGO Solid-State Relay and Optocoupler Modules www.wago.com

Optocoupler module
859 Series

Control circuit
Nominal input voltage UN 110 VDC
Input voltage range (low level) 0 … 60 VDC
Input voltage range (high level) 100 … 120 VDC
Nominal input current at UN 3.8 mA
Load circuit
Circuit type 2-wire connection
Limiting continuous current 3 A
Peak output current 25 A
Nominal output voltage 24 VDC
Output voltage range 3 … 30 VDC
Similar to picture
Voltage drop at output (max.) ≤ 0.4 VDC
Turn-on time ≤ 500 µs
Turn-off time ≤ 6 ms
Switching frequency ≤ 70 Hz

0V 0V Signaling
Status indicator Red LED
0V Safety and protection
Rated voltage 150 V
+24 V +110 V
Overvoltage category II
Pollution degree 2
Type of circuits Mains circuits
Dielectric strength (control/load circuit) (AC, 1 min) 3 kVeff
Insulation type (control/load circuit) Reinforced insulation (safe isolation)
Optocoupler module; Output voltage range: 3 … 30 V; Insulation type (adjacent devices) Reinforced insulation (safe isolation)
Limiting continuous current: 0.5 A; 1 changeover con-
tact; Red status indicator; Module width: 6 mm Connection data
Connection technology CAGE CLAMP®
Item No. PU
Solid conductor 0.2 … 2.5 mm² / 24 … 14 AWG
859-731 1
Fine-stranded conductor 0.2 … 2.5 mm² / 24 … 14 AWG
Fine-stranded conductor; with insulated ferrule 0.2 … 1.5 mm² / 24 … 14 AWG
Fine-stranded conductor; without insulated ferrule 0.2 … 1.5 mm² / 24 … 14 AWG
Strip length 5 … 6 mm / 0.2 … 0.24 inch
Physical data
56 mm/2.2 in

Width 6 mm / 0.236 inch

Height 91 mm / 3.583 inch
Depth from upper-edge of DIN-rail 56 mm / 2.205 inch
Mechanical data
Mounting type DIN-35 rail
91 mm/3.58 in
Material data
Color grey
Note: Weight 15,4 g
Optocouplers and solid state relays are designed for use
in signal processing networks, which are not supplied by Environmental requirements
the low-voltage power supply networks. Ambient temperature (operation at UN) -25 … +70 °C
Ambient temperature UL (operation at UN) -25 … +30 °C
Surrounding air temperature (storage) -40 … +70 °C
Processing temperature -25 … +50 °C
Relative humidity 5 … 95 % (no condensation permissible)
Continuous current ! Module assembly at UN Operating altitude (max.) 2000 m
I (A)
" Single module at UN
Standards and specifications
4
Standards/Specifications EN 61010-2-201; EN 61000-6-2; EN 61000-6-3; UL 508
"
3
2
!
1

0 20 40 60 ϑ (°C)
Ambient operating temperature

50 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 4, Section 2 | WAGO Solid-State Relay and Optocoupler Modules

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 51

 WAGO Power Supplies, Section 1 | WAGO Power Supplies; 1-Phase www.wago.com

Power supply;
Compact; 1-phase; 18 VDC / 1.25 A
787 Series

Input
Nominal input voltage Ui nom 1 x 100 … 240 VAC
Input voltage range 100 … 264 VAC
Nominal mains frequency range 47 … 63 Hz
Input current Ii ≤ 0.4 A (110 VAC); ≤ 0.2 A (240 VAC)
Inrush current ≤ 24 A (NTC)
Mains failure hold-up time ≥ 95 ms (230 VAC)
Output
Nominal output voltage Uo nom/Control deviation 18 VDC (SELV) / ≤ 2 %
Nominal output current Io nom 1.25 A (18 VDC)
Nominal output power 22 W
Residual ripple ≤ 60 mV (peak-to-peak)
Overload behavior Hiccup
Signaling and communication
Signaling 1 x Status indication LED (green)
18 V
3 18 V
Operation status indicator Green LED (Uo)
N 18 V
Efficiency/power losses
L GND
GND
Power loss Pl ≤ 0.5 W (230 VAC; No load); ≤ 4 W (230 VAC; Nominal
GND load)
Power loss (max.) Pl (max.) 5 W (110 VAC / 24 VDC; 1,35 A)
Efficiency (typ.) 88 %
Absicherung
Internal fuse T 1.25 A / AC 250 V
Power supply; Compact; 1-phase; 18 VDC output volta- Recommended backup fusing 16 A (for USA/Canada: 15 A)
ge; 1.25 A output current
Safety and protection/Environmental requirements
Item No.. PU Isolation voltage (pri.-sec./pri.-PE/sec.-PE) 2.47 kVAC / 3.92 kVAC / 0,5 kVDC
787-2857 1 Protection class/ Protection type I / IP20 (per EN 60529)
Overvoltage category III (≤ 2000 m a. s.l.); II (> 2000 m a. s.l.)
Short-circuit-protected Yes
Parallel operation/series operation Yes/yes
MTBF > 2,500,000 h (per IEC 61709 at +40 °C)
Surrounding air temperature (operation) −25 … +70 °C (nominal mounting position; −20 … +55 °C
H

in any mounting position)

Relative humidity 5 … 96 % (no condensation permissible)
Derating -1.7 %/K (> 55 °C)
Pollution degree 2
Connection data
D
W Connection technology Push-in CAGE CLAMP®
Input/signaling (solid/fine-stranded/AWG) 0.25 … 2.5 mm² / 0.25 … 2.5 mm² / 22 … 12 AWG
Output (solid/fine-stranded/AWG) 0.2 … 1.5 mm² / 0.2 … 1.5 mm² / 24 … 16 AWG
Features:
• Stepped profile for installation in standard distribution Physical data/ Mechanical data/ Material data
boards Width x Height x Depth (mm) 36 x 90 x 62; depth from upper edge of DIN-rail: 55
• Connection technology with Push-in CAGE CLAMP®
• Parallel operation/series operation Mounting type DIN-35 rail
• Electrically isolated output voltage (SELV) per EN/UL Weight 120 g
61010-1 or EN/UL 61010-2-201
Standards and specifications
Standards/Specifications EN 61204-3; EN 61010-1; EN 61010-2-201;
cULus 61010-1; cULus 61010-2-201, DNV

52 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com WAGO Power Supplies, Section 1 | WAGO Power Supplies; 1-Phase

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 53

 WAGO Power Supplies, Section 2 | WAGO Power Supplies; 3-Phase www.wago.com

Power supply;
Pro 2; 3-phase; 24 VDC / 5 A
2787 Series

Input
Phases 3 (2 at Ui ≥ 400 VAC)
Nominal input voltage Ui nom 3 x AC 400 … 500 V (connection without neutral con-
ductor)
Input voltage range 3 x AC 340 … 550 V
Nominal mains frequency range 50 … 60 Hz; 0 Hz
Input current Ii ≤ 3 x 0.4 A (400 VAC; 24 VDC / 5 ADC)
Inrush current ≤ 15 A (after 1 ms)
Power factor correction (PFC) Active
Mains failure hold-up time ≥ 20 ms (3 x 400 VAC)
Output
Nominal output voltage Uo nom/Control deviation 24 VDC (SELV)/ ≤ 1 %
Output voltage range 24 … 28 VDC (adjustable)
Nominal output current Io nom 5 A (24 VDC)
Nominal output power 240 W
L1
+ Residual ripple ≤ 70 mV (peak-to-peak)
+
L2
− Overload behavior TopBoost/PowerBoost/Time-limited constant current
L3
3
− mode (other overload behaviors can be set)
−
Signaling and communication
Signaling Optical status indication (DC OK; load; warning and error
states); Digital signal input and output (DI/DO)
DI− DI+ DO− DO+
Communication Communication interface, can be used with WAGO USB
Communication Cable (750-923) or IO-Link Communica-
tion Module (2789-9080), Modbus RTU Communication
Module (2789-9015) or Modbus TCP Communication
Power supply; Pro 2; 3-phase; 24 VDC output voltage; Module (2789-9052)
5 A output current; TopBoost + PowerBoost; communi-
cation capability Efficiency/power losses
Power loss Pl ≤ 3 W (Standby); ≤ 3 W (No load); ≤ 18 W (400 VAC;
Item No.. PU
Nominal load)
2787-2344 1 Efficiency (typ.) 93 % (400 VAC; 10 A; 25 °C)
2787-2344/000-030 1
Circuit protection
Protection coating 2787-2344/000-070 1
Required backup fusing An external DC fuse is required for the DC input voltage.
Recommended backup fusing 3 x 16 A (for USA/Canada: 3 x 15 A)
Safety and protection
Isolation voltage (pri.-sec./pri.-PE/sec.-PE/ 3.51 VAC / 2.2 VAC / 0.5 kVDC / 0.5 kVDC
sec.-signal)
H

Protection class/ Protection type I / IP20 (per EN 60529)

Overvoltage category III (≤ 2000 m a. s.l.); II (> 2000 m a. s.l.)
Pollution degree 2
Short-circuit-protected Yes
Parallel operation/series operation Yes/yes
D MTBF > 1,000,000 h (per IEC 61709)
W Surrounding air temperature (operation) -25 … +70 °C (Device starts at −40 °C (type-tested))
Relative humidity 5 … 96 % (no condensation permissible)
Features: Derating See instruction leaflet
• Power supply with TopBoost, PowerBoost and configu-
Connection data
rable overload behavior
• Configurable digital signal input and output, optical sta- Connection technology CAGE CLAMP®/ Push-in CAGE CLAMP®
tus indication, function keys Input/signaling (solid/fine-stranded/AWG) 0.08 … 2.5 mm² / 0.08 … 2.5 mm² / 28 … 12 AWG
• Communication interface for configuration and monito- Output (solid/fine-stranded/AWG) 0.5 … 10 mm² / 0.5 … 10 mm² / 20 … 8 AWG
ring
• Optional connection to IO-Link Physical data/ Mechanical data/ Material data
• Suitable for both parallel and series operation Width x Height x Depth (mm) 50 x 169 x 130 mm; Height with connector; depth from
• Natural convection cooling when horizontally mounted upper edge of DIN-rail
• Pluggable connection technology
Mounting type DIN-35 rail
• Electrically isolated output voltage (SELV/PELV) per
EN 61010-2-201/UL 61010-2-201 Weight 650 g
• Marker slot for WAGO marking cards (WMB) and WAGO Standards and specifications
marking strips
Standards/Specifications CE; EN 61010-1; EN 61010-2-201; EN 61204-3;
UL 61010-1; UL 61010-2-201; DNV GL (only 2787-
2344/000-030 und .../000-070)

54 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com WAGO Power Supplies, Section 2 | WAGO Power Supplies; 3-Phase

Power supply;
Pro 2; 3-phase; 24 VDC / 10 A
2787 Series

Input
Phases 3 (2 at Ui ≥ 400 VAC)
Nominal input voltage Ui nom 3 x AC 400 … 500 V (connection without neutral con-
ductor)
Input voltage range 3 x AC 340 … 550 V
Nominal mains frequency range 50 … 60 Hz; 0 Hz
Input current Ii ≤ 3 x 0.6 A (400 VAC; 24 VDC / 10 ADC)
Inrush current ≤ 15 A (after 1 ms)
Power factor correction (PFC) Active
Mains failure hold-up time ≥ 20 ms (3 x 400 VAC)
Output
Nominal output voltage Uo nom/Control deviation 24 VDC (SELV)/ ≤ 1 %
Output voltage range 24 … 28 VDC (adjustable)
Nominal output current Io nom 10 A (24 VDC)
Nominal output power 240 W
L1
+ Residual ripple ≤ 70 mV (peak-to-peak)
+
L2
− Overload behavior TopBoost/PowerBoost/Time-limited constant current
L3
3
− mode (other overload behaviors can be set)
−
Signaling and communication
Signaling Optical status indication (DC OK; load; warning and error
states); Digital signal input and output (DI/DO)
DI− DI+ DO− DO+
Communication Communication interface, can be used with WAGO USB
Communication Cable (750-923) or IO-Link Communica-
tion Module (2789-9080), Modbus RTU Communication
Module (2789-9015) or Modbus TCP Communication
Power supply; Pro 2; 3-phase; 24 VDC output voltage; Module (2789-9052)
10 A output current; TopBoost + PowerBoost; commu-
nication capability Efficiency/power losses
Power loss Pl ≤ 3 W (Standby); ≤ 3 W (No load); ≤ 18 W (400 VAC;
Item No.. PU
Nominal load)
2787-2346 1 Efficiency (typ.) 93 % (400 VAC; 10 A; 25 °C)
2787-2346/000-030 1
Circuit protection
Protection coating 2787-2346/000-070 1
Internal fuse 3 x T 2.5 A / 500 VAC
Recommended backup fusing 3 x 16 A (for USA/Canada: 3 x 15 A)
Safety and protection
Isolation voltage (pri.-sec./pri.-PE/sec.-PE/ 3.51 VAC / 2.2 VAC / 0.5 kVDC / 0.5 kVDC
sec.-signal)
H

Protection class/ Protection type I / IP20 (per EN 60529)

Overvoltage category III (≤ 2000 m a. s.l.); II (> 2000 m a. s.l.)
Pollution degree 2
Short-circuit-protected Yes
Parallel operation/series operation Yes/yes
D MTBF > 1,000,000 h (per IEC 61709)
W Surrounding air temperature (operation) -25 … +70 °C (Device starts at −40 °C (type-tested))
Relative humidity 5 … 96 % (no condensation permissible)
Features: Derating See instruction leaflet
• Power supply with TopBoost, PowerBoost and configu-
Connection data
rable overload behavior
• Configurable digital signal input and output, optical sta- Connection technology CAGE CLAMP®/ Push-in CAGE CLAMP®
tus indication, function keys Input/signaling (solid/fine-stranded/AWG) 0.08 … 2.5 mm² / 0.08 … 2.5 mm² / 28 … 12 AWG
• Communication interface for configuration and monito- Output (solid/fine-stranded/AWG) 0.5 … 10 mm² / 0.5 … 10 mm² / 20 … 8 AWG
ring
• Optional connection to IO-Link Physical data/ Mechanical data/ Material data
• Suitable for both parallel and series operation Width x Height x Depth (mm) 50 x 169 x 130 mm; Height with connector; depth from
• Natural convection cooling when horizontally mounted upper edge of DIN-rail
• Pluggable connection technology
Mounting type DIN-35 rail
• Electrically isolated output voltage (SELV/PELV) per
EN 61010-2-201/UL 61010-2-201 Weight 1000 g
• Marker slot for WAGO marking cards (WMB) and WAGO Standards and specifications
marking strips
Standards/Specifications CE; EN 61010-1; EN 61010-2-201; EN 61204-3;
UL 61010-1; UL 61010-2-201; DNV GL (only 2787-
2346/000-030 und .../000-070)

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 55

 WAGO Power Supplies, Section 2 | WAGO Power Supplies; 3-Phase www.wago.com

Power supply;
Pro 2; 3-phase; 24 VDC / 20 A
2787 Series

Eingang
Input
Phasen
Phases beiUUi ≥e ≥400
3 (2 at ACVAC)
400 V)
Nominal
Eingangsnennspannung
input voltage Ui nom
Ue Nenn 3 x AC 400
AC 400 … 500 V
500 V (connection
(Anschluss ohne
without
Neutralleiter)
neutral con-
Eingangsspannungsbereich ductor)
3 x AC 340 … 550 V
Input voltage range
Nennnetzfrequenz-Bereich 3
50x …
AC 340
60 Hz;…0 550 V
Hz
Nominal mains frequency
Eingangsstrom Ie range 503…
≤ 60 Hz; 0 Hz
x 0,8 A (AC 400 V; DC 24 V / 20 A)
Input current Ii
Einschaltstrom ≤ 3
≤ 15x 0.8 A
A (nach(400 VAC; 24 VDC / 20 ADC)
1 ms)
Inrush current
Leistungsfaktorkorrektur (PFC) ≤ 15 A
aktiv (after 1 ms)
Power factor correction (PFC)
Netzausfallüberbrückung Active
≥ 20 ms (3 x AC 400 V)
Mains failure hold-up time ≥ 20 ms (3 x 400 VAC)
Ausgang
Output
Ausgangsnennspannung U /Regelabweichung DC 24 V (SELV) / ≤ 1 %
a Nenn
Nominal output voltage Uo nom/Control deviation
Ausgangsspannungsbereich 24 VDC
DC 24 …(SELV)/ ≤ 1 %
28 V (einstellbar)
Output voltage range I
Ausgangsnennstrom 24 … 28 VDC (adjustable)
20 A (DC 24 V)
a Nenn
Nominal output current Io nom
Ausgangsnennleistung 20 A
480 W(24 VDC)
Nominal output power
Restwelligkeit 480
≤ 70WmV (Spitze − Spitze)
L1
+ Residual
Verhaltenripple
bei Überlast ≤ 70 mV (peak-to-peak)
TopBoost/PowerBoost/zeitlich begrenzter Konstant-
+
L2
− Overload behavior strommodus (weitere Überlastverhalten
TopBoost/PowerBoost/Time-limited einstellbar)
constant current
L3
3
− mode (other overload behaviors can be set)
− Signalisierung und Kommunikation
Signaling and communication
Signalisierung Optische Zustandsanzeige (DC-OK; Auslastung;
Signaling Warn- und
Optical Fehlerzustände);
status indication (DCdigitaler
OK; load;Signaleingang und
warning and error
-ausgang
states); (DI/DO)
Digital signal input and output (DI/DO)
DI− DI+ DO− DO+
Kommunikation
Communication Kommunikationsschnittstelle,
Communication interface, cannutzbar
be usedmit
with WAGO USB
WAGO USB-Kommunikationskabel
Communication Cable (750-923) or(750-923),
IO-Link Communica-
Kommunikationsmodul
tion Module (2789-9080),IO-Link
Modbus(2789-9080),
RTU Communication
Module (2789-9015) or Modbus TCP
Kommunikationsmodul RTU Communication
(2789-9015) oder
Power supply; Pro 2; 3-phase; 24 VDC output voltage; Module (2789-9052) Modbus TCP (2789-9052)
Kommunikationsmodul
20 A output current; TopBoost + PowerBoost; commu-
nication capability Efficiency/power losses
Wirkungsgrad/Verlustleistungen
Verlustleistung
Power loss Pl Pv ≤ 3.6
3,6 W (Standby);
(Stand-by);≤≤4.4
4,4WW(No
(Leerlauf);
load); ≤ ≤2121WW(400
(ACVAC;
400
Item No.. PU
V; Nennlast)
Nominal load)
2787-2347/000-030 1 Wirkungsgrad
Efficiency (typ.)typ. 95,9 % (400
95.9 % (AC 400
VAC;
V;20
20A;
A;25
25°C)
°C)
Protection coating 2787-2347/000-070 1
Absicherung
Circuit protection
Interne Sicherung
Internal fuse 3 x T 2.5
2,5 A / 500 VAC
AC 500 V
Empfohlene Vorsicherung
Recommended backup fusing 3 x 16 A (for
(für USA/Kanada:
USA/Canada: 3 x 15 A)
Sicherheit
Safety andund
protection
Schutz/Umgebungsbedingungen
Isolation voltage (pri.-sec./pri.-PE/sec.-PE/
Isolationsspannung AC 3,51
3.51 VACkV
/ 2.2
/ ACVAC
2,2/kV
0.5 kVDC
/ DC 0,5/ kV
0.5 kVDC
/ DC 0,5 kV
H

(Pri.-Sek./Pri.-PE/Sek.-PE/Sek.-Signal)
sec.-signal)
Schutzklasse/Schutzart
Protection class/ Protection type I / IP20 (per
(gemäß
EN 60529)
EN 60529)
Überspannungskategorie
Overvoltage category III (≤ 2000 m a.
ü. s.l.);
N.N.);II II(>(>2000
2000mma.ü.s.l.)
N.N.)
Kurzschlussfest
Pollution degree ja
2
Parallelschaltbar/reihenschaltbar
Short-circuit-protected ja/ja
Yes
T
D MTBF operation/series operation
Parallel > 800.000 h (gemäß IEC 61709)
Yes/yes
B
W Umgebungstemperatur (Betrieb)
MTBF -25
> 800,000
… +70 h°C(per
(Anlauf
IEC 61709)
bei -40 °C typgeprüft)
Relative Feuchte
Surrounding air temperature (operation) 5 ……
-25 96+70 °C
% (keine
(Device
Betauung
startszulässig)
at −40 °C (type-tested))
Features: Deratinghumidity
Relative siehe
5 … 96 %
Beipackzettel
(no condensation permissible)
• Power supply with TopBoost, PowerBoost and configu- Verschmutzungsgrad
Derating 2 instruction leaflet
See
rable overload behavior
• Configurable digital signal input and output, optical sta- Anschlussdaten
Connection data
tus indication, function keys Anschlusstechnik
Connection technology CAGE CLAMP®/
CLAMP®; Push-in CAGE CLAMP®
• Communication interface for configuration and monito- Eingang/Signalisierung
Input/signaling (solid/fine-stranded/AWG)
(eindrähtig/feindrähtig/AWG) 0,08 … 2.5 mm² /
0.08 2,5 mm² / 0.08
0,08 … 2.5 mm² /
2,5 mm² / 28 … 12 AWG
12 AWG
ring
• Optional connection to IO-Link Ausgang
Output (solid/fine-stranded/AWG)
(eindrähtig/feindrähtig/AWG) 0,5 … 10 mm² / 0.5
0.5 0,5 … 10 mm² / 20 … 8 AWG
• Suitable for both parallel and series operation Geometrische
Physical data/ Mechanical
Daten/Mechanische
data/ Material
Daten/Werkstoffdaten
data
• Natural convection cooling when horizontally mounted
Breite x Höhe
Width Heightx xTiefe
Depth(mm)
(mm) 70 x 130 x 130;mm; Height
70 x 169 x 130 Höhe mit Steckverbinder;
with connector;Tiefe
depthabfrom
Ober-
• Pluggable connection technology
kante
upper Tragschiene
edge of DIN-rail
• Electrically isolated output voltage (SELV/PELV) per
EN 61010-2-201/UL 61010-2-201 Montageart
Mounting type Tragschiene
DIN-35 rail 35
• Marker slot for WAGO marking cards (WMB) and WAGO Gewicht
Weight 1400 g
marking strips
Normen und
Standards Bestimmungen
and specifications
Standards/Specifications CE; EN 61010-1; EN 61010-2-201; EN 61204-3; UL
61010-1; UL 61010-2-201; DNV GL

56 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com WAGO Power Supplies, Section 2 | WAGO Power Supplies; 3-Phase

Power supply;
Pro 2; 3-phase; 24 VDC / 40 A
2787 Series

Input
Phases 3 (2 at Ui ≥ 400 VAC)
Nominal input voltage Ui nom 3 x AC 400 … 500 V (connection without neutral con-
ductor)
Input voltage range 3 x AC 340 … 550 V
Nominal mains frequency range 50 … 60 Hz; 0 Hz
Input current Ii ≤ 3 x 1.7 A (400 VAC; 24 VDC / 40 ADC)
Inrush current ≤ 15 A (after 1 ms)
Power factor correction (PFC) Active
Mains failure hold-up time ≥ 20 ms (3 x 400 VAC)
Output
Nominal output voltage Uo nom/Control deviation 24 VDC (SELV)/ ≤ 1 %
Output voltage range 24 … 28 VDC (adjustable)
Nominal output current Io nom 40 A (24 VDC)
Nominal output power 960 W
L1
+ Residual ripple ≤ 70 mV (peak-to-peak)
+
L2
− Overload behavior TopBoost/PowerBoost/Time-limited constant current
L3
3
− mode (other overload behaviors can be set)
−
Signaling and communication
Signaling Optical status indication (DC OK; load; warning and error
states); Digital signal input and output (DI/DO)
DI− DI+ DO− DO+
Communication Communication interface, can be used with WAGO USB
Communication Cable (750-923) or IO-Link Communica-
tion Module (2789-9080), Modbus RTU Communication
Module (2789-9015) or Modbus TCP Communication
Power supply; Pro 2; 3-phase; 24 VDC output voltage; Module (2789-9052)
40 A output current; TopBoost + PowerBoost; commu-
nication capability Efficiency/power losses
Efficiency (typ.) 96.1 % (400 VAC; 40 A; 25 °C)
Item No.. PU
2787-2348/000-030 1 Circuit protection
Protection coating 2787-2348/000-070 1 Internal fuse 3 x T 3.2 A / 500 VAC
Recommended backup fusing 3 x 16 A (for USA/Canada: 3 x 15 A)
Safety and protection
Isolation voltage (pri.-sec./pri.-PE/sec.-PE/ 3.51 VAC / 2.2 VAC / 0.5 kVDC / 0.5 kVDC
sec.-signal)
Protection class/ Protection type I / IP20 (per EN 60529)
H

Overvoltage category III (≤ 2000 m a. s.l.); II (> 2000 m a. s.l.)

Pollution degree 2
Short-circuit-protected Yes
Parallel operation/series operation Yes/yes
MTBF > 800,000 h (per IEC 61709)
D Surrounding air temperature (operation) -25 … +70 °C (Device starts at −40 °C (type-tested))
W
Relative humidity 5 … 96 % (no condensation permissible)
Derating See instruction leaflet
Features:
• Power supply with TopBoost, PowerBoost and configu- Connection data
rable overload behavior Connection technology CAGE CLAMP®/ Push-in CAGE CLAMP®
• Configurable digital signal input and output, optical sta- Input/signaling (solid/fine-stranded/AWG) 0.08 … 2.5 mm² / 0.08 … 2.5 mm² / 28 … 12 AWG
tus indication, function keys Output (solid/fine-stranded/AWG) 0.5 … 10 mm² / 0.5 … 10 mm² / 20 … 8 AWG
• Communication interface for configuration and monito-
ring Physical data/ Mechanical data/ Material data
• Optional connection to IO-Link Width x Height x Depth (mm) 120 x 169 x 130 mm; Height with connector; depth from
• Suitable for both parallel and series operation upper edge of DIN-rail
• Natural convection cooling when horizontally mounted
Mounting type DIN-35 rail
• Pluggable connection technology
• Electrically isolated output voltage (SELV/PELV) per Weight 2000g
EN 61010-2-201/UL 61010-2-201
Standards and specifications
• Marker slot for WAGO marking cards (WMB) and WAGO
marking strips Standards/Specifications CE; EN 61010-1; EN 61010-2-201; EN 61204-3; UL
61010-1; UL 61010-2-201; DNV GL

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 57

 CAD Data

Parts List

Marking

PDF Documentation

OR
DE
R

Volume 6, WAGO Marking

www.wago.com Volume 6

Volume 6, WAGO Marking

Page
Smart Printer 60

Safety labels 62

Marking strips 62

Cable tie marker 63

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 59

 Volume 6, Section 1 | WAGO Thermal Transfer Smart Printer www.wago.com

Marking device
Printer model: Smart Printer ▶ Marking method: Thermotransfer

Connection Data
Interfaces USB, RS-232, Ethernet 10/100 Mbps

System Requirements
Memory 4 GB
Supported operating systems Windows 7; Windows 8; Windows 10

Technical Data
Operating voltage 100 … 240 VAC, 50 … 60 Hz (automatic adjustment)
Marking method Thermal transfer
Print head Glass layer, spring-mounted
Print speed (max.) max. 127 mm/s (WAGO recommends 50.8 mm/s)
See-through/reflective sensor yes, centrally fixed
Operating display Color TFT LCD with navigation button
Safety approvals CE (EMC)
Ink ribbon Reel outside diameter: 40 mm; core inside diameter 12.7 mm (0.5 inch);
max. length 110 m; max. width 58 mm
Memory 8 MB
Print resolution 300 dpi (12 pixels/mm)
Print width (max.) 47 mm
Print length (max.) 762 mm

Mechanical Data
Dimensions W x H x D (135 x 175 x 245) mm

Environmental Requirements
Surrounding air temperature (operation) 5 … 40 °C
Surrounding air temperature (storage) -20 … 50 °C

60 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 6, Section 1 | WAGO Thermal Transfer Smart Printer

Marking device
Printer model: Smart Printer ▶ Marking method: Thermotransfer
Scope of delivery: Power supply + cable, 2 x roller
(258‑5006 + 258‑5007), 1 x reel holder, 1 x ink ribbon
(258-5005), Smart Script marking software and driver,
USB cable, external unwinder

258-5001

Item No. PU
258-5001 1

PU = Packaging Unit; SPU = Subpackaging Unit​

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 61

 Volume 6, Section 1 | WAGO Thermal Transfer Smart Printer www.wago.com

Safety labels; Marking strips

210 / 2009 Series

Safety labels; 99 x 44 mm; 300 labels/reel Marking strips; for Smart Printer; on reel; not stretchable;
plain; 11 mm wide; 20 m reel
Color Item No. Pack. Unit Color Item No. Pack. Unit
silver 210-824 1 yellow 2009-110/020-002 1

62 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com Volume 6, Section 1 | WAGO Thermal Transfer Smart Printer

Cable tie marker

211 Series

Cable tie marker; for Smart Printer; plain; for use with Cable tie marker; for Smart Printer; plain; for use with Cable tie marker; for Smart Printer; plain; for use with
cable ties; 25 x 10 mm; 500 S00 pcs/reel cable ties; 100 x 15 mm; 800 pcs/reel cable ties; 44 x 10 mm; 500 pcs/reel
Color Item No. Pack. Unit Color Item No. Pack. Unit Color Item No. Pack. Unit
yellow 211-835/000-002 1 yellow 211-836/000-002 1 yellow 211-837/000-002 1
red 211-835/000-005 1 red 211-836/000-005 1 white 211-837 1
white 211-835 1 white 211-836 1

Accessories
Cable tie; 2.5 x 100 mm
807-090/101-100 1

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 63

 ​​ www.wago.com

​Item Number Index

Item No. Page Item No. Page Item No. Page Item No. Page

210 Series ​807 Series

2​ 10-82462 807-090/101-10063
​ ​
​ ​
211 Series 852 Series
211-83563 852-112/000-00144
211-835/000-00263 ​
211-835/000-00563 ​
211-83663 859 Series
211-836/000-00263 859-73150
211-836/000-00563 ​
211-83763 ​
211-837/000-00263 2009 Series
​ 2009-110/020-00262
258 Series ​
258-500160 ​
​ 2759 Series
​ 2759-242/261-10006
750 Series 2759-263/211-100019
750-471/040-00034 2759-283/211-100019
750-600/000-00130 2759-290/211-100019
750-600/040-00137 2759-293/211-100019
750-637/040-00036 2759-296/211-100011
750-661/000-00426 2759-2015/261-10007
750-662/000-00426 2759-2120/261-10004
750-666/000-004 27 2759-2233/211-10009
750-667/000-00428 2759-2236/211-10009
750-67729 2759-2243/211-100019
750-677/040-00035 2759-2246/211-100012
750-94046 2759-2273/211-10008
750-1417/040-00032 2759-2276/211-10008
750-1516/040-00033 2759-2290/211-100019
750-8212/040-00020 2759-2293/211-100019
750-8212/040-00120 2759-2296/211-100013
750-8216/040-00021 ​​
750-8217/600-00019
750-8217/625-00019 2787 Series
​ 2787-234454
751 Series 2787-2344/000-03054
751-930118 2787-2344/000-07054
​ 2787-234655
​ 2787-2346/000-03055
752 Series 2787-2346/000-07055
752-980016 2787-2347/000-03056
​ 2787-2347/000-07056
​ 2787-2348/000-03057
753 Series 2787-2348/000-07057
753-12026 ​
753-661/000-00426 2854 Series
753-662/000-00426 2854-099/000-00122
753-667/000-00428 2854-099/000-00223
​ 2854-099/000-00324
758 Series 2854-099/000-00425
758-879/000-00119 ​
758-879/000-210819 ​
758-879/000-310218 ​​​​​​​Products highlighted in RED are new
758-879/000-310818 items for Spring 2022
758-97519 ​
​ ​
​
762 Series
762-921414
762-921514
762-931415
762-931515
​
765 Series
765-101/000-000 43
765-102/000-00043
765-2701/200-00038
765-2702/200-00039
765-2703/200-00040
765-2704/200-00041
765-2705/200-00042
765-2706/200-00042
​
787 Series
787-285752
​

64 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com ​​

Item No. Page Item No. Page Item No. Page Item No. Page

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 65

 ​​ www.wago.com

WAGO Worldwide
Companies and Representatives

Algeria Chile Germany Jordan

Please contact WAGO France Desimat Chile WAGO GmbH & Co. KG Oxgen for Engineering Systems Co. L.L.C
Puerto Vespucio 9670 Waldstraße 1 11953 Jordan
Argentinia Pudahuel Santiago 99706 Sondershausen Phone +962 79 9 860 869
Bruno Schillig S.A. Phone +56 747 0152 Phone +49 3632 659-0 [email protected]
Arenales 4030, B1604CFD [email protected] Fax +49 3632 659-100
Florida, PBA [email protected] Kazakhstan
Phone +54 11 4730 1100 China Axima LLP
[email protected] WAGO Electronic (Tianjin) Co., Ltd. Greece 232/2, Ryskulov avenue
No.5, Quan Hui Road PANAGIOTIS SP. DIMOULAS 050061 Almaty
Armenia Tianjin 301700 DIMOULAS AUTOMATIONS Phone +7 727 356 52 91/92/93
ROOT ITSP LLC Phone +86 22 5967 7688 Kritis Str. 26 [email protected]
33 Halabyan str. [email protected] 10439 Athens [email protected]
38, Yerevan Phone +30 210 883 3337
[email protected] Colombia [email protected] Technik-Tade LLC
T.H.L. Ltda. Kabanbay Str. 11
Australia Cra. 49 B # 91-33 Honduras 70004 Ust-Kamenogorsk
WAGO Pty. Ltd. Bogotá CILASAS S.A. de C.V. Phone +7 7232 254064
2-4 Overseas Drive Phone +57 1 621 85 50 7 Calle entre 14 y 15 Ave. N.O. [email protected]
Noble Park Victoria 3174 [email protected] P.O. Box. 1061
Phone +61 03 8791 6300 San Pedro Sula Korea
[email protected] Croatia Phone +504 2557 1146/7 WAGO Korea Co., Ltd.
M.B.A. d.o.o. [email protected] Imiro 40,
Austria Frana Supila 5 16006, Uiwang-Si
WAGO Kontakttechnik Ges.m.b.H. 51211 Matulji Hong Kong Phone +82 31 421 9500
Europaring F15 602 Phone +385 51 275-736 National Concord Eng., Ltd. [email protected]
2345 Brunn am Gebirge [email protected] 611-619 Castle Peak Road
Phone +43 1 6150780 Tsuen Wan, N.T. Kosovo
[email protected] MICROSTAR d.o.o. Phone +852 2429 2611 Please contact WAGO Bulgaria
Siget 18 b [email protected]
Azerbaijan 10010 Zagreb Latvia
Please contact WAGO Turkey Phone +385 3647 849 Hungary INSTABALT LATVIA SIA
[email protected] WAGO Hungá¡ria KFT Vestienas iela 14
Bangladesh Szabadság út 117. Rīga, LV-1035
Please contact WAGO India Czech Republic 2040 Budaörs Phone +370 52 322 295
WAGO Elektro spol. sr. o. Phone +36 23 791 000 [email protected]
Belarus Rozvodova 1116/36 [email protected]
ATAVA Techno Ltd. 143 00 Praha 12 - Modřany Lebanon
vulica Dzianisaŭskaja 47 Phone +420 261 090 143 Iceland Gemayel Trading & Contracting
220006 Minsk [email protected] FAGKAUP EHF. Rue 55
Telefon: +375 173 881 018 [email protected] Smidjuvegur 3 P.O. BOX 70-1096 Antelias
E-Mail: [email protected] 200 Kopavogur Phone +961 3 22 30 29
Denmark Phone +354 520-4500 [email protected]
DemsEnergo LLC WAGO Denmark A/S [email protected]
Vostochnaya Str. 39 Lejrvej 17 Lithuania
220040 Minsk 3500 Værløse India INSTABALT LIT UAB
Phone +375 17 2102189 Phone +45 44 357 777 WAGO India Savanorių 187
[email protected] [email protected] Block No. 94 Mumbai - Agra, National Vilnius, 2053
Highway, Untiya, Gujarat 391243 Phone +370 52 322 295
Belgium Ecuador Phone +91-265-6812100 [email protected]
WAGO BeLux nv ECUAINSETEC CIA LTDA [email protected]
Excelsiorlaan 11 Yugoslavia N34-110 y Azuay Luxembourg
1930 Zaventem Azuay Indonesia Please contact WAGO Belgium
Phone +32 2 717 9090 Phone +593 2 24 50 475 Please contact WAGO Singapore
[email protected] [email protected] Malaysia
Iraq HPH MATERIALS (M) SDN BHD
Bolivia Egypt EBDAA ALWAKEEL COMPANY Jalan Nilam 1/6
ISOTEK S.R.L. Please contact WAGO United Arab Mosque, Koya rd Near sayd gharib 40000 Shah Alam, Selangor D.E.
Barrio 23 de Junio, Avenida San Juan, Emirates 44001 Erbil Phone +60 3 5638 2213
Entre Calle 4 y 5. Phone +964 7504920300 [email protected]
Santa Cruz Estonia [email protected]
Phone +593 311 2470 Eltarko OÜ WAGO Automation Sdn. Bhd.
[email protected] Treiali tee 2 Ireland Jalan PJS 8/9,
75312 Harjumaa Drives & Controls 46150 Petaling Jaya,
Bosnia & Herzegovina Phone +372 503 2740 Nangor Road Selangor Darul Ehsan
Please contact WAGO Bulgaria [email protected] Dublin 12 Phone +60 3 7877 1776
Phone +353 1 4604474 [email protected]
Brasilia Finland [email protected]
WAGO Eletroeletrônicos Ltda WAGO Finland Oy Maldives
Rua Trípoli, 640 Äyritie 12 B Israel Please contact WAGO India
13212-217 Jundiaí - SP 01510 Vantaa Comtel Israel Electronic Solutions Ltd.
Phone +55 (11) 2923 7200 Phone +358 9 7744 060 20 Hataas Street Mexico
[email protected] [email protected] P.O. Box 66 WAGO S.A. de C.V.
44425200 Kfar-Saba Carretera estatal 431 Km. 2+200
Bulgaria France Phone +972 9 76 77 243 Lote 99 Módulo 6
WAGO BULGARIA OOD WAGO Contact SAS [email protected] 762460 Qro.
2E Akad. Ivan Geshov Blvd. 83 Rue des Chardonnerets Phone +52 442 221 5946
1330 Sofia 93290 - Tremblay en France Italy [email protected]
Phone +359 2 489 46 09 Phone +33 1 4717 2590 WAGO Elettronica SRL a Socio Unico
[email protected] [email protected] Via Parini 1 Morocco
40033 Casalecchio di Reno (BO) Automatisme & Connection Maroc
Canada Germany Phone +39 051 6132112 23, Rue Boured
WAGO Canada, Inc. WAGO GmbH & Co. KG [email protected] 20300 Casablanca
1550 Yorkton Ct Hansastraße 27 Phone +33 1 4717 2590
Burlington, ON L7P 5B7 32423 Minden Japan [email protected]
Phone +1-888-9246-221 Phone +49 571 887-0 WAGO Co. of JAPAN Ltd.
[email protected] Fax +49 571 887-169 1-5-7, Kameido Nepal
[email protected] Tokyo 136-0071 Please contact WAGO India
Phone +81 3 5627 2050
[email protected]

66 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com ​​

Netherlands Republic North Macedonia Spain United Arab Emirates

WAGO Nederland B.V. Kompjunet Inzenering DICOMAT S.L. WAGO Middle East (FZC)
Laan van de Ram 19 Vladimir Komarov 1A-3/9 Avda. de la Industria, 36 SAIF Zone, Q4-282
7234 BW APELDOORN 1000 Skopje 28108 Alcobendas (Madrid) P.O. Box 120665
Phone +31 55 36 83 500 Phone +389 2 521 12 00 Phone +34 91 662 1362 Sharjah, UAE
[email protected] [email protected] [email protected] Phone +971 6 5579920
[email protected]
New Zealand Romania Sri Lanka
Engineering Computer Services Ltd WAGO KONTAKTTECHNIK ROMANIA S.R.L Please contact WAGO India United Kingdom
7-19 Ruffell Rd Sos. Pipera-Tunari nr. 1/1 WAGO Limited
Hamilton, 3200 77190 Voluntari, Ilfov Sweden Swift Valley Industrial Estate
Phone +64 (0) 7 849 2211 Phone +40-(0)31 421 85 68 WAGO Sverige AB CV21 1SG Rugby
[email protected] [email protected] Box 11127 [email protected]
Adolfsbergsv. 31
Nigeria VDR & SERVICE SRL Phone +46 858 410 680 United States
GIL Automations Ltd. Str. Valeriu Branișten no. 60 [email protected] WAGO CORPORATION
2 Lateef Jakande Rd. 030718 Bukarest N120 W19129 Freistadt Road
100271 Ikeja, Lagos State Phone +40 21 32250 74/76 Switzerland Germantown, WI 53022
Phone +234 17132672335 [email protected] WAGO CONTACT SA Phone +1 262 255 6222
[email protected] Rte. de l’Industrie 19 [email protected]
Russia 1564 Domdidier
Norway ООО WAGO Contact Rus Phone +41/26 676 75 00 Venezuela
WAGO Norge AS Ilimskaya strret 5 [email protected] PETROBORNAS, C.A.
Jerikoveien 20 127576 Moscow C.C. PLAZA AEROPUERTO - PISO 1
1067 Oslo Phone +7 495 223 4747 Syria (8015) UNARE - PUERTO ORDAZ -
Phone +47 22 30 94 50 [email protected] Please contact WAGO United Arab ESTADO BOLÍVAR
[email protected] www.wago.ru Emirates Phone +58 286 951 3382
[email protected]
Oman OOO PROSOFT Taiwan
Please contact WAGO United Arab ul. Profsouznaya, 108 WAGO Contact, Ltd. Vietnam
Emirates 117437 Moscow 5F., No.168, Jiankang Rd ASEAN TRADING AN ENGINEERING JOINT
Phone +7 495 2340636 Taipei County 23585 STOCK COMPANY (ASEATEC)
Pakistan [email protected] Phone +886 2 2225 0123 No 1, lane 18 Nguyen Hong Str.
FuziLogiX Automation & Control [email protected] 100000 DONG DA DIST: HANOI
Suit No. 14, 5th Floor, Shan Arcade Saudi Arabia Phone +84 24 3773 5355
New Garden Town, Lahore Saudi Electronic Trading Thailand [email protected]
Phone +92 42 594 1503 - 4 P.O. Box 60712 WAGO REPRESENTATIVE OFFICE
[email protected] Riyadh 11555 THAILAND ETEC AUTOMATION TECHNOLOGY CO.,
Phone +966 11 2063 377 213/6-8 Rachada-Phisek Road LTD.
S.A. Hamid & Co. [email protected] 10400 Dingaeng Bangkok 173 Nguyen Suy Str.
7 Brandreth Road Phone +66 2 6935611 700000 HO CHI MINH CITY,
Lahore, 54000 Serbia [email protected] Phone +84 8 6252 9141 - 49
Phone +92 42 376 500 99 Mehatronik Sistem d.o.o. [email protected]
[email protected] Bul. Oslobodjenja 30 ITTHIRIT TECHNOLOGY CO., LTD.
32000 Cacak Watcharapon Road
Paraguay Phone +381 (0)32 310 088 10220 Bangkok Version: 10/2021
Current adresses at www.wago.com
AESA [email protected] Phone +66 2 347 0780
c/Antolin Irala [email protected]
2309 Asunción Sigma Controls Engineering d.o.o.
Phone +59 521674524 Jovana Skerlica 22 JJ-LAPP (T) LTD.
[email protected] 18000 Nis Soi Sukhamvit Road 62
Phone +381 (0)63 403 104 10110 Wattana, Bangkok, Thailand
Philippines [email protected] Phone +66 2 787 8288
Please contact WAGO Singapore [email protected]
Singapore
Poland WAGO Electronic Pte Ltd US POWER DISTRIBUTION CO., LTD.
WAGO ELWAG sp. z o. o. 138 Joo Seng Road #06-01 213/6-8 Rachada-Phisek Road
ul. Piękna 58 a Singapore 368361 10400 Dingaeng Bangkok
50-506 Wrocław Phone +65 62866776 Phone +66 2 2763040
Phone +48 71 3602970 [email protected] [email protected]
[email protected]
Slovakia Tunisia
WAGO ELWAG WRÓBLOWICE Proelektro spol. s r.o. Please contact WAGO France
ul. Innowacyjna 2 Na barine 22
55-330 Miękinia 841 03 Bratislava - Lamač Turkey
Tel- +48 71 360 22 95 Phone +421 2 4569 2503 WAGO Elektronik Sanayi ve Ticaret Ltd. Şti.
[email protected] [email protected] Cad. Hattat Sok. No. 10
34775 Ümraniye - Istanbul
Portugal Slovenia Phone +90 216 482 1133
MORGADO & CA. LDA - SEDE IC elektronika d.o.o. [email protected]
Estrada Exterior da Vodovodna cesta 100
Circunvalação 3558/3560 1000 Ljubljana Ukraine
4435 Rio Tinto Phone +386 1568 01 26 LLC RPE „Logicon“
Phone +351 22 9770600 [email protected] Predslavinskaya street, 37
[email protected] 3150 Kiev
Elektronabava d.o.o. Phone +380 44 522 8019
Qatar Cesta 24 junija 3 [email protected]
Please contact WAGO United Arab 1231 Ljubljana
Emirates Phone +386 58 99 300 Micropribor Ltd.
[email protected] 4, Krzhizhanovsky Str.
Republic Moldova 3142 Kiev
Smart Delight SRL South Africa Phone +380 44 392 93 86
Bulgara Str. 9/6 Shorrock Automation CC [email protected]
2001 Chisinau 5 Regency Drive, Route 21 Corp. Park
Phone +373 (373) 69 10 22 01 51 Centurion Uruguay
[email protected] Phone +27 12 4500300 Fivisa Electricidad
[email protected] Avda. Urugay 1274
11100 Montevideo
Phone +59 829 020 808
[email protected]

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 67

 www.wago.com

Notes

68 Supplementary Catalog – Automation Technology and WAGO Electronic Interface

www.wago.com

Notes

Supplementary Catalog – Automation Technology and WAGO Electronic Interface 69

 0888-1002/0122-0101 - Automatisierungstechnik und Interface-Elektronik 2022/1 DE - 04/2022-00 - Printed in Germany - Änderungen vorbehalten

WAGO GmbH & Co. KG

Postfach 2880 · 32385 Minden Zentrale 0571/ 887 - 0
Hansastraße 27 · 32423 Minden Vertrieb 0571/ 887 - 44222
[email protected] Auftragsservice 0571/ 887 - 44333
www.wago.com Fax 0571/ 887 - 844169

WAGO ist eine eingetragene Marke der WAGO Verwaltungsgesellschaft mbH.

„Copyright – WAGO GmbH & Co. KG – Alle Rechte vorbehalten. Inhalt und Struktur der WAGO Websites, Kataloge, Videos und andere WAGO Medien unterliegen dem Urhe-
berrecht. Die Verbreitung oder Veränderung des Inhalts dieser Seiten und Videos ist nicht gestattet. Des Weiteren darf der Inhalt weder zu kommerziellen Zwecken kopiert,
noch Dritten zugänglich gemacht werden. Dem Urheberrecht unterliegen auch die Bilder und Videos, die der WAGO GmbH & Co. KG von Dritten zur Verfügung gestellt
wurden.“