Iseki Th4260 4290 4330 Parts Manual

Full download: http://manualplace.com/download/iseki-th4260-4290-4330-parts-manual/ 1

Directions for use of Parts Catalogue

1. Applicable model of machines

All component and option parts used for TH4260,TH4290,TH4330 tractors are
listed in this parts catalogue.

1) MODEL TYPE
F････････ FOUR WHEEL DRIVE
H･･･････ HST
M･･･････ MID PTO.
D･･･････ DOUBLE CLUTCH
R････････ FRONT/REAR HITCH & ROPS

2) AREA CODE
E4･･･････ EUROPE

2. Explanation for head paragraph

① KEY shows the location of parts diagramed in the illustration.

② Parts numbers begin with `V´ and ｀W´ are standard parts of the market.
③ ｀LH´ and ｀RH´ on the parts name are described against the moving direction
of the machine or are described on the condition how to install parts on the
machines.

This is the cut pages sample. Download all 459 page(s) at: ManualPlace.com
2

④ SPC : The following symbol classifies parts to be used for machines.

｀*´ means standard parts.
｀T´ shows that the parts can be installed as optional parts.
｀R´ shows that the parts can be used as applicable parts to replace originally
equipped parts.
⑤ Upper column : QTY shows the number of parts to be used for one unit of
machine.
｀M´ is indicated for parts supplied by a meter long.
｀ｌ´ is indicated for parts supplied by liter.
｀AR´ is indicated for parts need to be adjusted or regulated.
Lower column : serial number
－229 means serial number up to 229.
230－ means serial number 230 and after.
⑥ ITC : Interchangeability
｀1´…OLD ← NEW
New parts can be used in place of the old parts.
｀2´…OLD → NEW
Old parts can be used in place of the new parts.
｀3´…OLD →← NEW
Old parts and new parts can not be replaced each other.
⑦ COL : Color code
Color is signified with color code number for colored parts.
Please see the color list shown in the next page.
⑧ GRP : Parts shown in this column can be replaced by SET parts.
Example : Parts marked ○
A can be replaced by parts marked ○
B , and ○
D

for ○
C , so the rest follow in the same alphabetical order.

⑨ Remarks
＊ Other maker's part code number is shown in this column.
＊ When Fig. No. is shown in the Remark column of SET parts or ASSY parts,
each of their component parts are listed in said Fig. No.
 3

3. Color :
The following colors are used color parts.
COLOR SPRAY　TYPE PAINTS PAINTS
COLOR
CODE CODE　NUMBER 4K　DRUM 16K　DRUM

４Ｌ NEO BLUE 1300-985-001-10 1300-985-003-00

５Ｉ SUNSET　GRAY 1300-959-001-10 1300-959-003-00 1300-959-004-00

６Ｇ SUMMER　WHITE 1300-958-001-10 1300-958-003-00 1300-958-004-00

７Ｆ MIRROR　BLACK 1300-954-001-10 1300-954-003-00 1300-954-004-00

NOTE : Color code is signified only for the parts assigned by the maker as color parts.

4. Serial Numbers :
1) For engines serial number is stamped on CYLINDER BLOCK ASSY.
Please see Fig. No. 5－1.
2) For chassies serial number is shown on the LABEL.
Please see

5. Parts Order
1) Parts numbers listed in the parts catalogue are all registered in “ISEKI on-line
computer”.
2) When you order parts, please make sure of correct numbers.
3) When substitute parts is available, the part number ordered will be
automatically turned to a new part number.
4) Please be sure to use “ISEKI GENUINE PARTS”.
Any other similar parts other than ISEKI parts when used may cause a trouble
that makes us unable to repair or guarantee the warrant.
4
*** Structure Table of Model ***
T T T T T
H H H H H
M 4 F F F 4 F F 4 F F F 4 F F 4FF
2DMM2HH2DMM2HH3HH
O 6RDD6MM9RDD9MM3MM
0EER0ER0EER0ER0ER
D 44EH4E 44EH4EH4E
4 4 4 4 4
E
L

FIG.
1 *** ** *** ** **
2 *** ** *** ** **
3 *** ** *** ** **
4 *** ** **
5 *** **
6 *** ** **
7 *** ** **
8 *** **
9 ** ** **
10 *** ***
11 *** ** *** ** **
12 ** ** **
13 *** ***
14 *** ***
15 ** ** **
16 *** ***
17 ** ** **
18 *** ***
19 ** ** **
20 *** ***
21 *** ***
22 *** ***
23 ** ** **
24 *** ***
25 ** ** **
26 *** ***
27 *** ***
28 ** ** **
29 ** ** **
30 *** ***
31 ** ** **
32 *** ***
33 *** ** *** ** **
34 ** ** **
35 *** ***
36 ** ** **
37 * *
38 T** T**
39 *** ***
40 *** ** *** ** **
41 ** ** **
42 *** ***
43 *** ** *** ** **
44 ** ** **
45 T** T**
 5
*** Structure Table of Model ***
T T T T T
H H H H H
M 4 F F F 4 F F 4 F F F 4 F F 4FF
2DMM2HH2DMM2HH3HH
O 6RDD6MM9RDD9MM3MM
0EER0ER0EER0ER0ER
D 44EH4E 44EH4EH4E
4 4 4 4 4
E
L

FIG.
46 ** ** **
47 ** **
48 ** ** **
49 *** ***
50 ** ** **
51 ** ** **
52 *** ***
53 ** ** **
54 *** ***
55 *** ** *** ** **
56 *** ** *** ** **
57 *** ** *** ** **
58 ** ** **
59 *** ***
60 *** ** *** ** **
61 *** ** *** ** **
62 ** ** **
63 *** ***
64 *** ** *** ** **
65 ** ** **
66 *** ***
67 *** ***
68 ** ** **
69 *** ***
70 ** ** **
71 *** ** *** ** **
72 ** ** **
73 *** ***
74 *** ** *** ** **
75 *** ** *** ** **
76 *** ** *** ** **
77 *** ** *** ** **
78 *** ** *** ** **
79 *** ** *** ** **
80 ** ** **
81 *** ***
82 ** ** **
83 *** ***
84 ** ** **
85 T* T* T*
86 *T* *T*
87 *** ** *** ** **
88 *** ** *** ** **
89 *** ** *** ** **
90 *** ** *** ** **
6
*** Structure Table of Model ***
T T T T T
H H H H H
M 4 F F F 4 F F 4 F F F 4 F F 4FF
2DMM2HH2DMM2HH3HH
O 6RDD6MM9RDD9MM3MM
0EER0ER0EER0ER0ER
D 44EH4E 44EH4EH4E
4 4 4 4 4
E
L

FIG.
91 ** ** **
92 *** ***
93 *** ** *** ** **
94 *** ** *** ** **
95 ** ** **
96 *** ***
97 TTT TT TTT TT TT
98 *** ***
99 ** ** **
100 *** ***
101 *** ** *** ** **
102 ** ** **
103 *** ***
104 *** ** *** ** **
105 ** ** **
106 *** ***
107 **
108 ** **
109 ***
110 ***
111 * * * * * * *
112 *** ** *** ** **
113 ** ** **
114 *** ***
115 *** ** *** ** **
116 *** ** *** ** **
117 TTT TTT
118 TTT TTT
119 TTT TTT
120 TTT TT TTT TT TT
121 TTT TT TTT TT TT
122 TTT T TTT T
123 T T T T T
124 TTT TT TTT TT TT
125 TTT TTT
126 TTT TT TTT TT TT
127 TTT TTT
128 TTT TT TTT TT TT
129 TTT TT TTT TT TT
130 TT TT TT
131 TTT TTT
132 TTT TT TTT TT TT
133 TTT TT TTT TT TT
134 *** ** *** ** **
135 ** ** **
 7
*** Structure Table of Model ***
T T T T T
H H H H H
M 4 F F F 4 F F 4 F F F 4 F F 4FF
2DMM2HH2DMM2HH3HH
O 6RDD6MM9RDD9MM3MM
0EER0ER0EER0ER0ER
D 44EH4E 44EH4EH4E
4 4 4 4 4
E
L

FIG.
136 ** ** **
137 *** ** *** ** **
138 TTT TT TTT TT TT
139 *** ***
140 ** ** **
141 ** ** **
8
 9

Contents

TH4260

ENGINE(E3CEVB12)

CYLINDER HEAD........................................................................................................... Fig. 1

CYLINDER HEAD COVER.............................................................................................Fig. 2
INLET MANIFOLD......................................................................................................... Fig. 3
EXHAUST MANIFOLD................................................................................................... Fig. 4
CYLINDER BLOCK......................................................................................................... Fig. 5
BEARING/UNDER SIZE (OPTION)...............................................................................Fig. 6
OIL PAN........................................................................................................................... Fig. 7
REAR PLATE................................................................................................................... Fig. 8
TIMING GEAR CASE...................................................................................................... Fig. 9
HANGER.......................................................................................................................... Fig. 10
VALVE.............................................................................................................................. Fig. 11
CAM SHAFT.....................................................................................................................Fig. 12
PISTON.............................................................................................................................Fig. 13
PISTON/OVER SIZE (OPTION)..................................................................................... Fig. 14
CRANK SHAFT................................................................................................................Fig. 15
OIL PUMP........................................................................................................................ Fig. 16
WATER PUMP................................................................................................................. Fig. 17
COOLING FAN................................................................................................................ Fig. 18
INJECTION NOZZLE..................................................................................................... Fig. 19
INJECTION PUMP......................................................................................................... Fig. 20
FUEL PIPE.......................................................................................................................Fig. 21
ADAPTER......................................................................................................................... Fig. 22
ELECTRIC (1).................................................................................................................. Fig. 23
ELECTRIC (2).................................................................................................................. Fig. 24
10

LABEL.............................................................................................................................. Fig. 25
REPAIR PARTS (OPTION)............................................................................................. Fig. 26
COMPONENT PARTS
FOR 6215-300-037-00 ON Fig.19................................................................................ Fig. 27
COMPONENT PARTS
FOR 6215-600-078-10 ON Fig.20................................................................................ Fig. 28
COMPONENT PARTS
FOR 6281-100-002-30 ON Fig.23................................................................................ Fig. 29
COMPONENT PARTS
FOR 6281-200-021-00 ON Fig.23................................................................................ Fig. 30
 11

Contents

TH4260H

ENGINE(E3CEVB11)

CYLINDER HEAD........................................................................................................... Fig. 1

CYLINDER HEAD COVER.............................................................................................Fig. 2
INLET MANIFOLD......................................................................................................... Fig. 3
EXHAUST MANIFOLD................................................................................................... Fig. 4
CYLINDER BLOCK......................................................................................................... Fig. 5
BEARING/UNDER SIZE (OPTION)...............................................................................Fig. 6
OIL PAN........................................................................................................................... Fig. 7
REAR PLATE................................................................................................................... Fig. 8
TIMING GEAR CASE...................................................................................................... Fig. 9
HANGER.......................................................................................................................... Fig. 10
VALVE.............................................................................................................................. Fig. 11
CAM SHAFT.....................................................................................................................Fig. 12
PISTON.............................................................................................................................Fig. 13
PISTON/OVER SIZE (OPTION)..................................................................................... Fig. 14
CRANK SHAFT................................................................................................................Fig. 15
OIL PUMP........................................................................................................................ Fig. 16
WATER PUMP................................................................................................................. Fig. 17
COOLING FAN................................................................................................................ Fig. 18
INJECTION NOZZLE..................................................................................................... Fig. 19
INJECTION PUMP......................................................................................................... Fig. 20
FUEL PIPE.......................................................................................................................Fig. 21
ADAPTER......................................................................................................................... Fig. 22
ELECTRIC (1).................................................................................................................. Fig. 23
ELECTRIC (2).................................................................................................................. Fig. 24
12

LABEL.............................................................................................................................. Fig. 25
REPAIR PARTS (OPTION)............................................................................................. Fig. 26
COMPONENT PARTS
FOR 6215-300-037-00 ON Fig.19................................................................................ Fig. 27
COMPONENT PARTS
FOR 6215-600-078-10 ON Fig.20................................................................................ Fig. 28
COMPONENT PARTS
FOR 6281-100-002-30 ON Fig.23................................................................................ Fig. 29
COMPONENT PARTS
FOR 6281-200-021-00 ON Fig.23................................................................................ Fig. 30
 13

Contents

TH4290

ENGINE(E3CFVB24)

CYLINDER HEAD........................................................................................................... Fig. 1

CYLINDER HEAD COVER.............................................................................................Fig. 2
INLET MANIFOLD......................................................................................................... Fig. 3
EXHAUST MANIFOLD................................................................................................... Fig. 4
CYLINDER BLOCK......................................................................................................... Fig. 5
BEARING/UNDER SIZE (OPTION)...............................................................................Fig. 6
OIL PAN........................................................................................................................... Fig. 7
REAR PLATE................................................................................................................... Fig. 8
TIMING GEAR CASE...................................................................................................... Fig. 9
HANGER.......................................................................................................................... Fig. 10
VALVE.............................................................................................................................. Fig. 11
CAM SHAFT.....................................................................................................................Fig. 12
PISTON.............................................................................................................................Fig. 13
PISTON/OVER SIZE (OPTION)..................................................................................... Fig. 14
CRANK SHAFT................................................................................................................Fig. 15
OIL PUMP........................................................................................................................ Fig. 16
WATER PUMP................................................................................................................. Fig. 17
COOLING FAN................................................................................................................ Fig. 18
INJECTION NOZZLE..................................................................................................... Fig. 19
INJECTION PUMP......................................................................................................... Fig. 20
FUEL PIPE.......................................................................................................................Fig. 21
ADAPTER......................................................................................................................... Fig. 22
ELECTRIC (1).................................................................................................................. Fig. 23
ELECTRIC (2).................................................................................................................. Fig. 24
14

LABEL.............................................................................................................................. Fig. 25
REPAIR PARTS (OPTION)............................................................................................. Fig. 26
COMPONENT PARTS
FOR 6215-300-037-00 ON Fig.19................................................................................ Fig. 27
COMPONENT PARTS
FOR 6215-600-078-10 ON Fig.20................................................................................ Fig. 28
COMPONENT PARTS
FOR 6281-100-002-30 ON Fig.23................................................................................ Fig. 29
COMPONENT PARTS
FOR 6281-200-021-00 ON Fig.23................................................................................ Fig. 30
 15

Contents

TH4290H

ENGINE(E3CFVB22)

CYLINDER HEAD........................................................................................................... Fig. 1

CYLINDER HEAD COVER.............................................................................................Fig. 2
INLET MANIFOLD......................................................................................................... Fig. 3
EXHAUST MANIFOLD................................................................................................... Fig. 4
CYLINDER BLOCK......................................................................................................... Fig. 5
BEARING/UNDER SIZE (OPTION)...............................................................................Fig. 6
OIL PAN........................................................................................................................... Fig. 7
REAR PLATE................................................................................................................... Fig. 8
TIMING GEAR CASE...................................................................................................... Fig. 9
HANGER.......................................................................................................................... Fig. 10
VALVE.............................................................................................................................. Fig. 11
CAM SHAFT.....................................................................................................................Fig. 12
PISTON.............................................................................................................................Fig. 13
PISTON/OVER SIZE (OPTION)..................................................................................... Fig. 14
CRANK SHAFT................................................................................................................Fig. 15
OIL PUMP........................................................................................................................ Fig. 16
WATER PUMP................................................................................................................. Fig. 17
COOLING FAN................................................................................................................ Fig. 18
INJECTION NOZZLE..................................................................................................... Fig. 19
INJECTION PUMP......................................................................................................... Fig. 20
FUEL PIPE.......................................................................................................................Fig. 21
ADAPTER......................................................................................................................... Fig. 22
ELECTRIC (1).................................................................................................................. Fig. 23
ELECTRIC (2).................................................................................................................. Fig. 24
16

LABEL.............................................................................................................................. Fig. 25
LABEL.............................................................................................................................. Fig. 26
REPAIR PARTS (OPTION)............................................................................................. Fig. 27
COMPONENT PARTS
FOR 6215-300-037-00 ON Fig.19................................................................................ Fig. 28
COMPONENT PARTS
FOR 6215-600-078-10 ON Fig.20................................................................................ Fig. 29
COMPONENT PARTS
FOR 6281-100-002-30 ON Fig.23................................................................................ Fig. 30
COMPONENT PARTS
FOR 6281-200-021-00 ON Fig.23................................................................................ Fig. 31
 17

Contents

TH4330H

ENGINE(E3CDVB32)

CYLINDER HEAD........................................................................................................... Fig. 1

CYLINDER HEAD COVER.............................................................................................Fig. 2
INLET MANIFOLD......................................................................................................... Fig. 3
EXHAUST MANIFOLD................................................................................................... Fig. 4
CYLINDER BLOCK......................................................................................................... Fig. 5
BEARING/UNDER SIZE (OPTION)...............................................................................Fig. 6
OIL PAN........................................................................................................................... Fig. 7
REAR PLATE................................................................................................................... Fig. 8
TIMING GEAR CASE...................................................................................................... Fig. 9
HANGER.......................................................................................................................... Fig. 10
VALVE.............................................................................................................................. Fig. 11
CAM SHAFT.....................................................................................................................Fig. 12
PISTON.............................................................................................................................Fig. 13
PISTON/OVER SIZE (OPTION)..................................................................................... Fig. 14
CRANK SHAFT................................................................................................................Fig. 15
OIL PUMP........................................................................................................................ Fig. 16
WATER PUMP................................................................................................................. Fig. 17
COOLING FAN................................................................................................................ Fig. 18
INJECTION NOZZLE..................................................................................................... Fig. 19
INJECTION PUMP......................................................................................................... Fig. 20
FUEL PIPE.......................................................................................................................Fig. 21
ADAPTER......................................................................................................................... Fig. 22
ELECTRIC (1).................................................................................................................. Fig. 23
ELECTRIC (2).................................................................................................................. Fig. 24
18

LABEL.............................................................................................................................. Fig. 25
LABEL.............................................................................................................................. Fig. 26
REPAIR PARTS (OPTION)............................................................................................. Fig. 27
COMPONENT PARTS
FOR 6215-300-031-00 ON Fig.19................................................................................ Fig. 28
COMPONENT PARTS
FOR 6215-600-104-20 ON Fig.20................................................................................ Fig. 29
COMPONENT PARTS
FOR 6281-100-002-30 ON Fig.23................................................................................ Fig. 30
COMPONENT PARTS
FOR 6281-200-021-00 ON Fig.23................................................................................ Fig. 31
 19

Contents

CHASSIS

RADIATOR SYSTEM...................................................................................................... Fig. 1

MUFFLER SYSTEM........................................................................................................Fig. 2
AIR CLEANER SYSTEM................................................................................................ Fig. 3
FILTER (FUEL) SYSTEM (TH4290,4330)..................................................................... Fig. 4
FILTER (FUEL) SYSTEM (TH4260).............................................................................. Fig. 5
TANK (FUEL/MAIN) SYSTEM (TH4290,4330).............................................................Fig. 6
TANK (FUEL/SUB) SYSTEM (TH4290,4330)............................................................... Fig. 7
TANK (FUEL) SYSTEM (TH4260)................................................................................. Fig. 8
BATTERY SYSTEM (H TYPE)....................................................................................... Fig. 9
BATTERY SYSTEM (EXCEPT H TYPE)....................................................................... Fig. 10
ACCELERATOR SYSTEM.............................................................................................. Fig. 11
FRONT MISSION CASE SYSTEM (H TYPE)............................................................... Fig. 12
DUAL CLUTCH SYSTEM (EXCEPT H TYPE)............................................................. Fig. 13
INPUT GEAR SYSTEM (EXCEPT H TYPE)................................................................. Fig. 14
INPUT GEAR,PTO GEAR,DRIVE GEAR,
PTO DRIVE GEAR SYSTEM (H TYPE)..................................................................... Fig. 15
CLUTCH SYSTEM (EXCEPT H TYPE)......................................................................... Fig. 16
MID MISSION CASE SYSTEM (H TYPE).....................................................................Fig. 17
FRONT MISSION CASE SYSTEM
(EXCEPT H TYPE)...................................................................................................... Fig. 18
HST UNIT,INPUT GEAR SYSTEM (H TYPE).............................................................. Fig. 19
INPUT METAL,
MAIN CHANGE GEAR SYSTEM
(EXCEPT H TYPE)...................................................................................................... Fig. 20
MAIN COUNTER GEAR SYSTEM
(EXCEPT H TYPE)...................................................................................................... Fig. 21
SUB CHANGE GEAR,SUB COUNTER GEAR,
BACK GEAR SYSTEM (EXCEPT H TYPE)...............................................................Fig. 22
Iseki Th4260 4290 4330 Parts Manual
Full download: http://manualplace.com/download/iseki-th4260-4290-4330-parts-manual/
20

SUB COUNTER GEAR SYSTEM (H TYPE).................................................................. Fig. 23

MAIN CHANGE SYSTEM (EXCEPT H TYPE)............................................................. Fig. 24
SUB CHANGE SYSTEM (H TYPE)................................................................................Fig. 25
SUB CHANGE SYSTEM (EXCEPT H TYPE)............................................................... Fig. 26
4WD GEAR SYSTEM (EXCEPT H TYPE)..................................................................... Fig. 27
4WD GEAR SYSTEM (H TYPE)..................................................................................... Fig. 28
4WD CHANGE SYSTEM (H TYPE)............................................................................... Fig. 29
4WD CHANGE SYSTEM (EXCEPT H TYPE)............................................................... Fig. 30
REAR MISSION CASE SYSTEM (H TYPE).................................................................. Fig. 31
REAR MISSION CASE SYSTEM
(EXCEPT H TYPE)...................................................................................................... Fig. 32
PTO COUNTER GEAR,PTO SHAFT SYSTEM............................................................. Fig. 33
PTO CHANGE SYSTEM (H TYPE)................................................................................ Fig. 34
PTO CHANGE SYSTEM (EXCEPT H TYPE)................................................................ Fig. 35
MID PTO SYSTEM (H TYPE)......................................................................................... Fig. 36
MID PTO COVER SYSTEM
(EXCEPT H,M TYPE).................................................................................................. Fig. 37
MID PTO SET
(M TYPE EXCEPT H-STANDARD/
EXCEPT H,M TYPE-OPTION)................................................................................... Fig. 38
CHANGE LEVER (MAIN) SYSTEM
(EXCEPT H TYPE)...................................................................................................... Fig. 39
CHANGE LEVER (SUB) SYSTEM................................................................................. Fig. 40
CHANGE LEVER (4WD) SYSTEM (H TYPE)............................................................... Fig. 41
CHANGE LEVER (4WD) SYSTEM
(EXCEPT H TYPE)...................................................................................................... Fig. 42
CHANGE LEVER (PTO) SYSTEM................................................................................. Fig. 43
CHANGE LEVER (MID PTO) SYSTEM
(H TYPE).......................................................................................................................Fig. 44
CHANGE LEVER (MID PTO) SYSTEM
(M TYPE EXCEPT H-STANDARD/
EXCEPT H,M TYPE-OPTION)................................................................................... Fig. 45
LINK (HST) SYSTEM (H TYPE).................................................................................... Fig. 46

This is the cut pages sample. Download all 459 page(s) at: ManualPlace.com