160 Ton Mobile Crane Specification
160 Ton Mobile Crane Specification
DIMENSIONS
TURNING RADIUS
Steering All wheel
Carrier inside 18' 9/16" (5.50m)
Over carrier 35' 8-3/8" (10.88m)
Over boom 38' 4-5/8" (11.70m)
Over boom extension 40' 4-5/8" (12.30m)
2
2. SUPERSTRUCTURE
1.18 DIMENSIONS 2.1 SUPERSTRUCTURE FRAME
Overall width : 9' 10-1/8" (3.00m) with 20.5R25 tires (std) Torsion resistant, all welded structure of high tensile steel.
9' 1/4" (2.75m) with 16.00R25 tires (opt) Connected to carrier by single race ball bearing slewing
Overall height : 13' 1-1/16"(3.99m) with 20.5R25 or 16.00 tires ring with external gearing providing 360°continuous rotation.
in travel condition. The overall height can be Central lubrication system for ball bearing slewing ring, boom
adjusted by +6-5/16" (+160mm), -4-5/16" (-110mm) elevation cylinder, boom pivot and winch.
Overall length : 48' 10-15/16" (14.909m)
Carrier length : 40' 8-3/4" (12.415m) 2. 2 CRANE ENGINE
Wheel base : 8' 4-13/16" + 5' 4-15/16" + 6' 6-3/4" + 5' 6-15/16" Mercedes Benz 6 cylinder water cooled diesel engine,
(2.56m + 1.65m + 2.00m + 1.7m) model OM 904 LA(Euromot IIIA /EPA Tier 3) with stepless control of
Track: 7' 11-1/2" (2.426m) with 20.5R25 tires (std) engine rpm by foot pedal.
7' 6-15/16" (2.310m) with 16.00R25 tires (opt) Displacement 259 in3 (4,150 cc) , Rating 175 hp (129 kW) at 2,200 rpm
Torque 498 ft-lbf (675 Nm) at 1,200-1,600 rpm
1.19 TRAVEL PERFORMANCE (according to DIN 70020) Fuel tank capacity : 58.1 gal (220 l)
Max. travel speed : 52.8 mph(85 km/h)
Min. travel speed at 800 rpm : 0.6 mph with the clutch closed 2. 3 HYDRAULIC SYSTEM
Max. gradeability : 69 % Three circuit diesel hydraulic system with oil cooler and 1 power
controlled axial piston double pump (electronically adjustable) and
Tires 16.00/20.5R25, Total GVW 132,275 lbs 1 axial piston pump for slewing and 2 gear pumps for pilot controls
Travel speeds (mph) Gradeability and boom locking mechanism.
Gear * max. engine revs (%)
off-road on-road off-road on-road 2.4 HYDRAULIC CONTROLS
1st 1.9 3.7 69 46 Two joy stick levers with 4 three-way electrically operated
2nd 1.9 5.0 69 34 valves for independent simultaneous operation of all crane
3rd 2.5 6.2 69 26 motions with infinite speed control.
4th 3.7 8.1 51 19
5th 4.3 9.9 38 15 2.5 TELESCOPIC BOOM
6th 5.6 13.0 29 11 Six section box type construction of high tensile steel,
7th 7.5 16.8 21 8 consisting of 1 base section and 5 telescopic sections.
8th 9.3 21.7 16 6 The boom is extended by means of 1 double acting single
9th 12.4 28.0 12 5 stage hydraulic cylinder.
10th 15.5 36.0 9 3 All boom telescope sections can be extended and retracted fully
11th 19.9 46.0 7 2 automatically and locked in the selected working position.
12th 25.5 52.8 5 1 All telescope sections are extendable under partial load.
1st reverse 1.9 3.7 69 42 Total retracted length : 41' 11-15/16" (12.8m)
2nd reverse 2.5 5.0 69 31 Total extended length : 196' 10-3/16" (60.0m)
Max. sheave height : 206' 8-5/16" (63.0m)
The gradeability is based on theoretical values and depends Telescoping speed out : 380 sec.
on ground conditions and the coefficient of friction.
2.6 BOOM EXTENSION
1.20 CARRIER OPTIONAL EQUIPMENT 12.5ft (3.8m), 33.5ft (10.2m) and 59.1ft (18.0m) double folding swing around type
1. 10 x 8 drive boom extension offsetable at 0°/20°/40°.
2. ABS 2 intermediate section(23.0ft each), increase the boom extension
3. Tyres 14.00 R25 - cattier width 9' 1/4" (2.75m) length to 105.0ft (32.0m).
4. Tyres 16.00 R25 - carrier width 9' 1/4" (2.75m) Equipped with anti-two block system.
5. Spare wheel 16.00 R25 (no bracket)
6. Spare wheel bracket 2.7 AUXILIARY LIFTING SHEAVE (SINGLE TOP) - OPTIONAL
7. Spare rim for 20.5 R25 tyre (painted) Single sheave mounted to main boom head for single line
8. Spare rim for 16.00 R25 tyre (painted) operation (stowable). Equipped with anti-two block system .
9. Towing attachment D-value 190kN with light and brake connection
10. Towing attachment D-value 260kN with light and brake connection 2.8 BOOM HOIST
11. Towing hook - rear 1 double acting hydraulic cylinder with integral holding valve.
12. Air and electrical lines for rear bumper for dolly Boom elevation : -1o to +84o
13. Low air warning buzzer and light Boom elevation speed : 84 sec. normal speed
14. Free swing and boom elevation circuits for boom dolly 42 sec. high speed (only derricking up)
15. Toolbox at rear
16. Toolbox with wood storage at rear
17. Battery re-charge and remote start connections
18. Additional independent heater with engine pre-heat(Thermo 90ST)
19. Air conditioning (in carrier cab)
20. Reversing video camera
21. Reversing alarm
22. Sleeping bed
23. Cool box (in carrier cab)
24. Emergency (engine) stop switch
25. AMOT-control (Automatic engine shut-off system)
26. 10m cable for battery connection
27. Additional fire extinguisher (4.4lbs - 2.0kg) including support
28. Compliance to Canada regulation (CMVSS)
29. Compliance to USA regulation
3
2.9 MAIN WINCH 2.15 SAFETY DEVICES
Axial piston constant displacement motor, grooved hoist Electronic load moment device (AML) with
drum with integral planetary gear, automatic hydraulically interpolation and automatic overload shut off, hoist limit
controlled spring loaded multiple disc brake and switch with shut off, overload warning and load moment
integral free wheeling (no sagging of load by hoisting). indicator. Digital display of boom angle, boom length, sheave
Winch drive assembly connected to open hydraulic system. height, working radius, hook load and further information.
Wire rope with "Superstop" easy reeving. Working area limitation for boom angle, sheave height
Lower limit switch and drum turn indicator. and working radius with automatic shut off.
Drum diameter : 20.67" (525 mm) Lift Adjuster function, Anti-two block system,
Rope diameter : 0.83" (21 mm) anemometer on the main boom head or on the jib head.
Rope length : 820.2' (250 m) Safety valves against pipe and hose rupture, holding
Max. Iine pull : 19,109 lbf (85 kN) valves on hydraulic cylinders.
Max. line speed : 426.5 ft/min (130 m/min)
2.16 SUPERSTRUCTURE OPTIONAL EQUIPMENT
2.10 AUXILIARY WINCH - OPTIONAL 1. 11 ton headache ball
Axial piston constant displacement motor, grooved hoist 2. 27.5 ton hook block (1 sheave), single
drum with integral planetary gear, automatic hydraulically 3. 69.4 ton hook block (3 sheaves), single
controlled spring loaded multiple disc brake and integral 4. 69.4 ton hook block (3 sheaves), double
free wheeling (no sagging of load by hoisting). Winch drive 5. 88.2 ton hook block (5 sheaves), single
assembly connected to open hydraulic system. Wire rope 6. 88.2 ton hook block (5 sheaves), double
with "Superstop" easy reeving. Lower limit switch 7. 137.8 ton hook block (7 sheaves), double
and drum turn indicator. 8. Auxiliary winch
Drum diameter : 20.67" (525 mm) 9. Compensating counterweight for Aux. winch
Rope diameter : 0.83" (21 mm) 10. Auxiliary lifting sheave (Single Top)
o o o
Rope length : 820.2' (250 m) 11. Boom extension 12.5', 33.5' and 59.1' offsets 0 /20 /40 incl. LMD program
o o
Max. Iine pull : 19,109 lbf (85 kN) 12. Hyd. boom extension 12.5', 33.5' and 59.1' offsets 0 -40 incl. LMD program
Max. line speed : 249.3 ft/min (76 m/min) 13. 1 x 23.0' boom extension insert (for 82.0') incl. LMD program
14. 2 x 23.0' boom extension insert (for 105.0') incl. LMD program
2.11 SLEWING GEAR 15. Bracket welded only for subsequent installation of additional sheaves
Constant displacement motor with three stage planetary 16. LMD program for 27,558 lbs counterweight
gear, foot actuated service or automatic brake and a parking brake. 17. LMD program for 47,178 lbs counterweight
Slewing speed infinitely variable: 0 - 1.6 rpm 18. Outrigger load display
19. Outrigger length indicator
2.12 COUNTERWEIGHT 20. Air conditioning
Total 92,593 lb divisible counterweight,assembled and disassembled 21. Electric fan
by hydraulic cylinders controlled from crane cab. 22. Winch drum mirror
Tail swing : 15.75' (4.8m) 23. Additional hydraulic oil cooler
24. 360 degree positive slew lock
2.13 SUPERSTRUCTURE CAB 25. External moment warning lamp (3 colors)
Spacious and ergonomic panoramic cab with sliding door 26. Hook block storage for 69.4 ton
and extra large tinted glass windows, electrically controlled 27. Tool box at right hand side of superstructure
fold out front window with windshield washer and wiper, fixed cab 28. Spark arrester
roof window with armoured glass and fold out rear cab window, 29. Additional 1 Rotating beacon
sun visor, cab light, 20° tiltable cockpit, adjustable hydraulically 30. 2 working lights on boom XENON type (adjustable from cab)
cushioned seat with headrest, signal horn, radio with CD player, 31. Aircraft warning light
and connection for wireless (12 volt). 32. Battery re-charge and remote start connection
Engine independent hot water heater with defroster 33. Emergency (engine) stop switch
nozzles for windshield and cab floor (Webasto Thermo 50). 34. AMOT-control (automatic engine shut-off system)
Ergonomically positioned control elements and 35. Emergency (man basket) lowering controls
instrumentation for crane operation including fuel level 36. Additional stop function under -13 oF (-25oC) ambient
gauge, engine cooling temperature, hour meter and 37. Boom dolly bracket
combined engine warning lamp. 38. Boom launching device
Outrigger and chassis engine functions control from superstructure cab. 39. Preparation of boom launching device
One-key system for the both carrier and crane cabs. 40. Preparation of single top
Air conditioning(OPTIONAL) 41. Preparation/Plumbing of auxiliary winch
42. Additional manual 1 set O/M, P/C (std. 2 sets)
2.14 ELECTRICAL SYSTEM 43. CD manual 1 set O/M, P/C
24 volt system with 80 A 3-phase alternator, 2 batteries 44. Special painting - 2 colors
each 12 V and 110 Ah, 1 rotating beacon on left hand side 45. Special painting - 3 colors
of main winch, 2 working lights on cab front flap and 2 side 46. Special painting boom sections (std. black)
lights on boom head. 47. One each additional color for more than 4 colors
4
ATF 130G-5 WORKING RANGE CHART
NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm
supporting surface. Boom deflection and subsequent radius and boom angle change must be
accounted for when applying load to hook.
5
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
On outriggers, 360° working area
Outriggers extended, outrigger base 24.61ft
Boom length [ ft ]
Counterweight 92,593lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
On outriggers, 360° working area
Outriggers extended, outrigger base 24.61ft
Boom length [ ft ]
6
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
On outriggers, 360° working area
Outriggers extended, outrigger base 24.61ft
Boom length [ ft ]
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
On outriggers, 360° working area
Outriggers extended, outrigger base 24.61ft
Boom length [ ft ]
7
ATF 130G-5 TADANO-Load rating chart
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
On outriggers, 360° working area
Outriggers extended, outrigger base 24.61ft
Boom length [ ft ]
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
Boom length [ ft ]
8
ATF 130G-5 TADANO-Load rating chart
Counterweight 0lbs
Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boom
Working radius [ ft ]
Working radius [ ft ]
On outriggers, 360° working area
Outriggers extended, outrigger base 24.61ft
Boom length [ ft ]
Boom length [ ft ]
Working
Working
radius
radius
98.7 112.9 127.0 141.2
[ ft ]
[ ft ]
° ° ° ° ° ° ° ° ° ° ° ° ° ° °
∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠
8.9 8.9
9.8 9.8
11.5 11.5
13.1 13.1
14.8 80 116.0 80 110.2 80 93.5 80 58.9 14.8
16.4 79 98.1 79 104.1 79 93.5 79 56.4 80 92.2 80 83.8 80 65.0 80 55.6 16.4
19.7 77 73.0 77 78.0 77 84.0 77 51.4 79 70.1 79 75.4 79 63.5 79 52.0 80 67.7 80 60.4 80 45.2 19.7
23.0 75 56.9 75 61.5 75 66.6 75 46.7 77 55.6 77 60.4 77 59.1 77 48.7 79 54.5 79 58.9 79 45.2 80 51.1 80 50.9 80 45.6 80 41.9 23.0
26.2 73 45.6 73 49.8 73 54.7 73 42.8 75 45.2 75 49.6 75 53.4 75 45.2 77 45.0 77 48.9 77 44.3 79 42.5 79 44.5 79 45.4 79 41.9 26.2
29.5 71 38.4 71 41.4 71 45.9 71 39.2 74 37.5 74 41.7 74 45.2 74 42.1 76 37.7 76 41.4 76 40.8 78 35.7 78 37.7 78 40.6 78 41.4 29.5
32.8 69 32.6 69 35.7 69 39.0 69 36.4 72 31.3 72 35.5 72 38.8 72 39.2 75 32.0 75 35.7 75 37.9 76 30.4 76 32.2 76 35.1 76 36.6 32.8
36.1 67 27.8 67 31.1 67 34.8 67 33.7 70 26.7 70 30.6 70 33.7 70 35.7 73 27.3 73 30.9 73 33.7 75 26.2 75 28.0 75 30.4 75 32.2 36.1
39.4 64 23.6 64 27.1 64 31.1 64 31.3 68 23.8 68 27.3 68 30.4 68 32.4 72 23.6 72 27.1 72 29.8 74 22.7 74 24.3 74 26.9 74 28.4 39.4
45.9 60 17.2 60 20.5 60 24.0 60 26.2 65 18.1 65 21.6 65 24.5 65 26.0 69 19.6 69 22.3 69 23.8 71 18.1 71 18.7 71 21.2 71 22.7 45.9
52.5 55 11.7 55 15.0 55 18.3 55 20.5 61 13.7 61 17.0 61 19.2 61 20.9 65 15.0 65 17.9 65 19.8 68 14.3 68 15.4 68 17.9 68 19.2 52.5
59.1 50 7.5 50 10.6 50 14.1 50 16.3 57 9.5 57 12.8 57 15.2 57 16.8 62 11.2 62 14.3 62 16.5 66 11.0 66 12.3 66 14.6 66 15.9 59.1
65.6 45 4.6 45 7.5 45 11.0 45 13.0 53 6.4 53 9.7 53 11.9 53 13.7 58 7.9 58 11.2 58 13.2 63 7.9 63 9.7 63 11.9 63 13.0 65.6
72.2 39 5.1 39 8.6 39 10.6 48 4.0 48 7.1 48 9.7 48 11.0 55 5.5 55 8.8 55 10.8 59 5.5 59 7.1 59 9.5 59 10.6 72.2
78.7 31 3.1 31 6.6 31 8.6 43 5.1 43 7.5 43 9.0 51 3.3 51 6.6 51 8.8 56 3.7 56 5.1 56 7.3 56 8.6 78.7
85.3 22 4.9 22 6.8 38 3.3 38 5.7 38 7.5 47 4.9 47 7.1 53 3.3 53 5.5 53 7.1 85.3
91.9 31 4.6 31 6.2 42 3.3 42 5.5 49 4.2 49 5.5 91.9
98.4 23 3.3 23 4.9 37 4.4 45 2.9 45 4.4 98.4
105.0 31 3.3 41 3.1 105.0
111.5 24 2.4 111.5
Telescoping sequence [ % ]
Tel. 1 92 46 0 0 92 46 0 0 92 46 0 92 92 46 0 Tel. 1
Tel. 2 46 46 46 0 46 46 46 0 46 46 0 92 46 46 46 Tel. 2
Tel. 3 46 46 46 0 46 46 46 46 46 46 92 46 46 46 92 Tel. 3
Tel. 4 0 46 46 92 46 46 46 92 46 46 92 46 46 92 92 Tel. 4
Tel. 5 0 0 46 92 0 46 92 92 46 92 92 46 92 92 92 Tel. 5
Boom length [ ft ]
Working
Working
radius
radius
[ ft ]
° ° ° ° ° ° °
∠ ∠ ∠ ∠ ∠ ∠ ∠
8.9 8.9
9.8 9.8
11.5 11.5
13.1 13.1
14.8 14.8
16.4 16.4
19.7 19.7
23.0 23.0
26.2 80 41.0 80 41.0 80 34.6 26.2
29.5 79 34.6 79 37.0 79 34.6 80 34.2 80 31.5 29.5
32.8 78 29.8 78 32.0 78 34.2 79 29.3 79 31.5 80 29.1 32.8
36.1 77 25.6 77 27.8 77 30.0 78 25.6 78 28.0 79 25.6 80 23.4 36.1
39.4 76 22.3 76 24.5 76 26.5 77 22.3 77 24.7 78 22.5 79 21.6 39.4
45.9 73 17.9 73 19.2 73 20.9 75 17.9 75 19.4 77 17.6 78 17.0 45.9
52.5 71 14.1 71 15.7 71 17.0 73 14.3 73 16.3 75 14.3 76 13.7 52.5
59.1 69 10.8 69 12.8 69 14.3 71 11.2 71 13.4 73 11.7 74 11.0 59.1
65.6 66 8.2 66 10.4 66 12.1 69 8.8 69 11.0 71 9.3 73 8.8 65.6
72.2 63 6.2 63 8.2 63 9.9 67 6.6 67 9.0 69 7.3 71 7.1 72.2
78.7 61 4.2 61 6.2 61 7.7 64 4.9 64 7.1 67 5.5 69 5.3 78.7
85.3 58 4.4 58 6.2 62 5.3 65 4.2 85.3
91.9 55 2.9 55 4.6 59 4.0 91.9
98.4 51 3.3 56 2.6 98.4
105.0 48 2.4 105.0
111.5 111.5
Telescoping sequence [ % ]
Tel. 1 92 46 0 92 46 92 100 Tel. 1
Tel. 2 92 92 92 92 92 92 100 Tel. 2
Tel. 3 92 92 92 92 92 92 100 Tel. 3
Tel. 4 46 92 92 92 92 92 100 Tel. 4
Tel. 5 46 46 92 46 92 92 100 Tel. 5
9
ATF 130G-5 WORKING RANGE CHART
NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm
supporting surface. Boom deflection and subsequent radius and boom angle change must be
accounted for when applying load to hook.
10
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593 lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 12.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 12.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
11
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593 lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 33.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 33.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
12
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593 lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 59.1 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 59.1 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
13
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593 lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 82.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 82.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
14
ATF 130G-5 TADANO-Load rating chart
Counterweight 92,593 lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 105.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 105.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
15
ATF 130G-5 TADANO-Load rating chart
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 12.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 12.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
16
ATF 130G-5 TADANO-Load rating chart
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 33.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 33.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
17
ATF 130G-5 TADANO-Load rating chart
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 59.1 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 59.1 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
18
ATF 130G-5 TADANO-Load rating chart
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 82.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 82.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
19
ATF 130G-5 TADANO-Load rating chart
Counterweight 69,224lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 105.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 105.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
20
ATF 130G-5 TADANO-Load rating chart
Counterweight 0lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 12.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 12.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
21
ATF 130G-5 TADANO-Load rating chart
Counterweight 0lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 33.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 33.5 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
22
ATF 130G-5 TADANO-Load rating chart
Counterweight 0lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 59.1 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 59.1 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
23
ATF 130G-5 TADANO-Load rating chart
Counterweight 0lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 82.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 82.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
24
ATF 130G-5 TADANO-Load rating chart
Counterweight 0lbs
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 105.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
Outrigger base 24.61 ft
Boom length 42.0 ft Boom length 42.0 ft to 84.5 ft Boom length 42.0 ft to 112.9 ft
Lifting capacities in 1,000 lbs according per SAE J765 on fly jib 105.0 ft
On outriggers, 360o working area
Working radius [ ft ]
Working radius [ ft ]
25
WARNING AND OPERATING INSTRUCTIONS FOR LIFTING
CAPACITIES ATF130G-5
GENERAL
1. Total rated loads shown on the TADANO LOAD RATING CHART 10. When making lifts at a load radius not shown, use the next
apply only to the machine as originally manufactured and normally longer radius to determine allowable capacity.
equipped by TADANO. Modifications to the machine or use of 11. Load per part line should not exceed 19,180 lbf for the main
optional equipment other than that specified can result in a winch and for the auxiliary winch.
reduction of capacity. 12. Loaded boom angles are approximate. The boom angle before
2. Hydraulic cranes can be hazardous if improperly operated or loading should be greater to account for deflection.
maintained. Operation and maintenance of this machine must 13. The 42.0 ft boom length capacities are based on the telescopic
be in compliance with the information in theOperation and boom being fully retracted. If not fully retracted(less than 56.2 ft
Maintenance Manual supplied with the machine. If this manual boom length), use the total rated loads for 56.2ft boom length
is missing, order a replacement through the distributor. according to the telescoping sequence.
3. The operator and other personnel associated with this machine 14. Extension or retraction of the telescopic boom with loads may
shall fully acquaint themselves with the latest applicable American be attempted within the limits of the TADANO LOAD RATING
National Standards Institute (ANSI) safety standards for cranes. CHART. The ability to telescope loads is limited by hydraulic
pressure, boom angle, boom length, crane maintenance, etc.
SET UP 15. When erecting or stowing the extendible fly jib, be sure to retain
1. Total rated loads shown on the TADANO LOAD RATING CHART it by hand or by other means to prevent its free movement.
are the maximum allowable crane capacities. They are based on 16. Use the Anti-Two Block (OVERWIND CUTOUT) disable switch
the machine standing level on firm supporting surface under ideal when erecting or stowing the extendible fly jib and stowing the
job conditions. Depending on the nature of the supporting surface, hook block. While the switch is pushed, the hoist will not stop,
it may be necessary to have structural supports under the even when an overwind condition occurs.
outrigger floats to spread the load to a larger bearing surface. 17. The working radius specified in the TADANO LOAD RATING
2. For on outrigger operation, outriggers shall be extended to the CHARTS for the extendible fly jib applies only if the telescopic
dimension according to the TADANO LOAD RATING CHART and boom is extended according to the TADANO LOAD RATING
secured by pins with tires free of supporting surface, before CHARTS. If one or more elements of the telescopic boom are
operating crane. retracted partially or completely, the specified boom angles
3. Working on tires and travelling with load is not allowed. will be decisive in determining total rated lifting capacities.
18. When lifting a load by using the extendible fly jib (auxiliary
OPERATION hoist) and telescopic boom (main hoist) simultaneously, do
1. Total rated loads with outriggers fully extended do not exceed the following:
85% of the tipping loads. Total rated loads with outriggers partially A. Select the correct program for the load moment device in
extended are determined by this formula: accordance with jib length, jib offset angle, counterweight
Total rated load = (tipping load -0.1 tip reaction) / 1.25. and outrigger base.
2. The crane's structural steelwork is in accordance with DIN 15018, B. Before starting the operation, make sure that the weight of
part 3. Design and construction of the crane comply with DIN the load is within the total rated load for the fly jib.
15018, part 2 and with F.E.M. regulations. 19. Working with Single Top
3. Total rated loads include the weight of the main hook block, auziliary hook ball, Operation with the single top is allowed with the main winch and
sling and other auxiliary lifting devices and all their weight shall be subtracted the auxiliary winch (2nd winch). The maximum allowed capacity
from the listed capacities to obtain the net load to be lifted. is limited by the selected S.L.I. code for main boom operation
Hookball / Hookblock (ton) 11.0 27.6 69.5 88.2 137.8 according to existing counterweight and outrigger base at one
No. of parts of line 1 2 3 4 5 6 7 8 9 10 11 12 13 14 side and by the single line pull which is limited by hydraulic
Max. lifting capacity (ton) 9.6 18.8 28.2 37.5 46.7 60.0 65.0 74.2 83.2 92.1 101.1 110.0 118.8 127.5 pressure at the other side.
Weight (lbs) 661 875 1,323 1,764 2,646 For operations with the single top mounted, use the TADANO
(For more than 14 rope lines additional lifting equipment is necessary) LOAD RATING CHART for the telescopic boom in accordance
4. Total rated loads are based on freely suspended loads and make with existing counterweight and outrigger base to find the total
no allowance for such factors as the effect of wind, sudden rated lifting capacity and also select the correct S.L.I. code for
stopping of loads, supporting surface conditions, operating the telescopic boom in accordance with the existing
speeds, side loads, etc. Side pull on boom or jib isextremely counterweight and outrigger base. Find the total rated lifting
dangerous. capacity based on boom length and working radius. From that
5. Total rated loads do not account for wind on lifted load or boom. value, subtract 1,100 lbs and the weights of all lifting equipment
Total rated loads and boom length shall be appropriately reduced, used including hook block, sling and other auxiliary lifting devices.
when wind velocity is above 18 mph (26 ft/sec.) for boom operation. The result (<total rated lifting capacity> - <1,100 lbs> - <lifting
and above 15 mph (22ft/sec.) for jib operation. equipment>) is the total rated lifting capacity for a single top lift.
6. Total rated loads at load radius shall not be exceeded. Do not
tip the crane to determine allowable loads. Definitions
7. Do not operate at boom lengths beyond radius or boom angles 1. Load Radius:
where no capacities are shown. Crane may overturn without any Horizontal distance from a projection of the axis of rotation to
load on the hook. supporting surface before loading to the center of the vertical
8. Slewing of the superstructure is admissible only when the crane hoist line or tackle with load applied. The deflection of the boom
is supported on half or fully extended outriggers. due to its deadweight and the rated load are taken into account.
9. The lifting capacity ratings specified in the TADANO LOAD 2. Loaded Boom Angle:
RATING CHART apply to the telescopic boom without fly jib The angle between the boom base section and the horizontal,
fixed in transport position or working position. after lifting the total rated load at the working radius
If the fly jib is secured to the telescopic boom in transport 3. Working Area:
position or working position, the lifting capacities of the Area measured in a circular arc about the centerline of rotation
telescopic boom are reduced by the values specified below 4. Freely Suspended Load:
The weight of the fly jib is detected in terms of a load, Load hanging free with no direct external force applied except
and the load moment limiter will shut off earlier by the hoist line.
Load rating reduction (x 1000lbs) 5. Side Load:
Boom length (ft) Horizontal side force applied to the lifted load either on the
Jib status
42.0 56.2 70.3 98.7 112.9 127.0 141.2 155.4 169.6 196.8 ground or in the air.
12.5ft/33.5ft/59.1ft fly jib, mounted in transport position 1.15 0.71 0.51 0.33 0.29 0.24 0.15 0.11 0.07 0.02
12.5ft fly jib,mounted to the boom head 2.18 2.03 1.94 1.81 1.76 1.74 1.74 1.72 1.70 1.68 Safe Load Indicator
33.5ft fly jib,mounted to the boom head 4.06 3.66 3.42 3.06 2.95 2.87 2.82 2.78 2.76 2.71 The Safe Load Indicator is intended as an aid to the
59.1ft fly jib, mounted to the boom head 6.61 5.75 5.27 4.50 4.30 4.10 4.03 3.92 3.86 3.77 operator. Under no condition should it be relied upon to replace use
82.0ft fly jib,mounted to the boom head 10.47 8.88 7.94 6.50 6.11 5.78 5.62 5.42 5.29 5.11 of TADANO LOAD RATING CHARTS and Operating Instructions.
105.0ft fly jib,mounted to the boom head 15.10 12.59 11.09 8.80 8.18 7.63 7.39 7.05 6.83 6.59 Sole reliance upon the Safe Load Indicator Aids in place of good operating
practice can cause an accident. The operator must exercise
caution to assure safety.
26
warning
ATF130G-5 Axle weight distribution chart
1) Normal traveling condition
GVW Axle 1 Axle 2 Axle 3 Axle 4 Axle 5
Base machine with 20.5R25 tires, 10x8 drive, no counterweight, 100% fuel, A/C both cabins 113,828 24,114 24,100 21,732 22,034 21,848
Add: A : 6,834lbs (1.5 metric ton) Counterweightat superstructure : Cwt. # 7 6,822 -2376 -2352 3914 3818 3818
B : 1,984lbs (1.8 metric ton) Counterweight (1,984lbs x 2pcs.)at superstructure : Cwt. # 8 & # 9 3,925 -1585 -1569 2399 2340 2340
C : 3,306lbs (3.1 metric ton) Counterweight (behind winch- fixed)at superstructure : Cwt. # 10 3,270 -1394 -1380 2048 1998 1998
Base machine with 20.5R25 tires, 10x8 drive, 100% fuel, A/C both cabs + Cwt. #7,#8,#9 & #10 (14,108lbs) at superstructure 127,845 18,759 18,799 30,093 30,190 30,004
Base machine with 20.5R25 tires, 10x8 drive, 100% fuel, A/C both cabs + Cwt. #7,#8,#9 & #10 (14,108lbs) at superstructure 133,353 24,098 24,085 19,772 20,122 19,936 25,340
Add: 1. 11.0 t (10metric ton) hook ball in Storage 662 73 72 175 171 171 0
2. 69.4t (63.0metric ton) 3 sheaves single hook block on dolly 1,322 0 0 0 0 0 1,322
3. 88.2t (80.0metric ton) 5 sheaves dubble hook block on dolly 1,746 0 0 0 0 0 1,764
4. 33.5 ft/ 59.1 ft fly jib ( include brackets ) 988 246 243 169 165 165 3,067
5. Auxiliary winch with cable ,
3,241 1,387 1,373 163 159 159 0
6. Additional oil cooler 93 11 11 24 23 23 0
7. Towing attachment 176 -70 -70 107 105 105 0
8. Tool box at rear 154 -58 -57 91 89 89 0
9. 16.00R25 tyres in lieu of 20.5R25 tyres -1103 -221 -221 -221 -221 -221 0
1. 5,952lbs (2.7 metric ton) Counterweight at carrier : Ctw. # 1 5,954 2,054 2,033 633 617 617 0
2. 7,495lbs (3.4 metric ton) Counterweight at carrier : Ctw. # 2 7,505 2,589 2,563 797 778 778 0
3. 19,621lbs (8.9 metric ton) Counterweight at carrier : Ctw. # 3 19,549 6,744 6,676 2,077 2,026 2,026 0
27
Mounting the 92,593 lbs (42 t) counterweight
1) 5,952 lb 2) 7,495 lb 3) 19,621lb 4) 22,046lb 5) 11,684lb 6) 11,684lb 7) 6,834lb 8) 1,984lb 9) 1,984lb 10) 3,306lb
0 lb
7,275 lb x x x
13,228 lb x x x x
20,062 lb x x x x x
27,558 lb x x x x x x
47,178 lb x x x x x x x
69,224 lb x x x x x x x x
92,593 lb x x x x x x x x x x
28